summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-03-30net: mscc: ocelot: add action of police on vcap_is2Xiaoliang Yang
Ocelot has 384 policers that can be allocated to ingress ports, QoS classes per port, and VCAP IS2 entries. ocelot_police.c supports to set policers which can be allocated to police action of VCAP IS2. We allocate policers from maximum pol_id, and decrease the pol_id when add a new vcap_is2 entry which is police action. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30Merge tag 'for-5.7/drivers-2020-03-29' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver updates from Jens Axboe: - floppy driver cleanup series from Willy - NVMe updates and fixes (Various) - null_blk trace improvements (Chaitanya) - bcache fixes (Coly) - md fixes (via Song) - loop block size change optimizations (Martijn) - scnprintf() use (Takashi) * tag 'for-5.7/drivers-2020-03-29' of git://git.kernel.dk/linux-block: (81 commits) null_blk: add trace in null_blk_zoned.c null_blk: add tracepoint helpers for zoned mode block: add a zone condition debug helper nvme: cleanup namespace identifier reporting in nvme_init_ns_head nvme: rename __nvme_find_ns_head to nvme_find_ns_head nvme: refactor nvme_identify_ns_descs error handling nvme-tcp: Add warning on state change failure at nvme_tcp_setup_ctrl nvme-rdma: Add warning on state change failure at nvme_rdma_setup_ctrl nvme: Fix controller creation races with teardown flow nvme: Make nvme_uninit_ctrl symmetric to nvme_init_ctrl nvme: Fix ctrl use-after-free during sysfs deletion nvme-pci: Re-order nvme_pci_free_ctrl nvme: Remove unused return code from nvme_delete_ctrl_sync nvme: Use nvme_state_terminal helper nvme: release ida resources nvme: Add compat_ioctl handler for NVME_IOCTL_SUBMIT_IO nvmet-tcp: optimize tcp stack TX when data digest is used nvme-fabrics: Use scnprintf() for avoiding potential buffer overflow nvme-multipath: do not reset on unknown status nvmet-rdma: allocate RW ctxs according to mdts ...
2020-03-30ionic: remove lifs on fw resetShannon Nelson
When the FW RESET event comes to the driver from the firmware, or the fw_status goes to 0 (stopped) or to 0xff (no PCI connection), then shut down the driver activity. This event signals a FW upgrade where we need to quiesce all operations and wait for the FW to restart. The FW will continue the update process once it sees all the LIFs are reset. When the update process is done it will set the fw_status back to RUNNING. Meanwhile, the heartbeat check continues and when the fw_status is seen as set to running we can restart the driver operations. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30ionic: disable the queues on link downShannon Nelson
When the link goes down, we need to disable the queues on the NIC in addition to stopping the netdev stack. This lets the FW know that the driver has stopped queue activity, and then the FW can do internal reconfiguration work, whether actually Link related, or for other internal FW needs. To do this, we pull out the queue enable and disable from ionic_open() and ionic_stop() so they can be used by other routines. To help keep things sane, we swap the queue enables so that the rx queue and its napi are enabled before the tx queue which rides on the rx queues napi. We also drop the ionic_lif_quiesce() as it doesn't do anything more than what the queue disable has already taken care of. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30ionic: check for queues before deletingShannon Nelson
Make sure the queue structures exist before trying to delete them. This addresses a couple of error recovery issues. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30ionic: clean tx queue of unfinished requestsShannon Nelson
Clean out tx requests that didn't get finished before shutting down the queue. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30ionic: move irq request to qcq allocShannon Nelson
Move the irq request and free out of the qcq_init and deinit and into the alloc and free routines where they belong for better resource management. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30ionic: move debugfs add/delete to match alloc/freeShannon Nelson
Move the qcq debugfs add to the queue alloc, and likewise move the debugfs delete to the queue free. The LIF debugfs add also needs to be moved, but the del is already in the LIF free. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30ionic: check for linkup in watchdogShannon Nelson
Add a link_status_check to the heartbeat watchdog. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30ionic: decouple link message from netdev stateShannon Nelson
Rearrange the link_up/link_down messages so that we announce link up when we first notice that the link is up when the driver loads, and decouple the link_up/link_down messages from the UP and DOWN netdev state. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30mlxsw: spectrum_ptp: Fix build warningsIdo Schimmel
Cited commit extended the enums 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' with values that were not accounted for in the switch statements, resulting in the build warnings below. Fix by adding a default case. drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c: In function ‘mlxsw_sp_ptp_get_message_types’: drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c:915:2: warning: enumeration value ‘__HWTSTAMP_TX_CNT’ not handled in switch [-Wswitch] 915 | switch (tx_type) { | ^~~~~~ drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c:927:2: warning: enumeration value ‘__HWTSTAMP_FILTER_CNT’ not handled in switch [-Wswitch] 927 | switch (rx_filter) { | ^~~~~~ Fixes: f76510b458a5 ("ethtool: add timestamping related string sets") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30Merge tag 'for-5.7/block-2020-03-29' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: - Online capacity resizing (Balbir) - Number of hardware queue change fixes (Bart) - null_blk fault injection addition (Bart) - Cleanup of queue allocation, unifying the node/no-node API (Christoph) - Cleanup of genhd, moving code to where it makes sense (Christoph) - Cleanup of the partition handling code (Christoph) - disk stat fixes/improvements (Konstantin) - BFQ improvements (Paolo) - Various fixes and improvements * tag 'for-5.7/block-2020-03-29' of git://git.kernel.dk/linux-block: (72 commits) block: return NULL in blk_alloc_queue() on error block: move bio_map_* to blk-map.c Revert "blkdev: check for valid request queue before issuing flush" block: simplify queue allocation bcache: pass the make_request methods to blk_queue_make_request null_blk: use blk_mq_init_queue_data block: add a blk_mq_init_queue_data helper block: move the ->devnode callback to struct block_device_operations block: move the part_stat* helpers from genhd.h to a new header block: move block layer internals out of include/linux/genhd.h block: move guard_bio_eod to bio.c block: unexport get_gendisk block: unexport disk_map_sector_rcu block: unexport disk_get_part block: mark part_in_flight and part_in_flight_rw static block: mark block_depr static block: factor out requeue handling from dispatch code block/diskstats: replace time_in_queue with sum of request times block/diskstats: accumulate all per-cpu counters in one pass block/diskstats: more accurate approximation of io_ticks for slow disks ...
2020-03-30devlink: Implicitly set auto recover flag when registering health reporterEran Ben Elisha
When health reporter is registered to devlink, devlink will implicitly set auto recover if and only if the reporter has a recover method. No reason to explicitly get the auto recover flag from the driver. Remove this flag from all drivers that called devlink_health_reporter_create. All existing health reporters set auto recovery to true if they have a recover method. Yet, administrator can unset auto recover via netlink command as prior to this patch. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30netdevsim: Change dummy reporter auto recover defaultEran Ben Elisha
Health reporters should be registered with auto recover set to true. Align dummy reporter behaviour with that, as in later patch the option to set auto recover behaviour will be removed. In addition, align netdevsim selftest to the new default value. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30ptp: Avoid deadlocks in the programmable pin code.Richard Cochran
The PTP Hardware Clock (PHC) subsystem offers an API for configuring programmable pins. User space sets or gets the settings using ioctls, and drivers verify dialed settings via a callback. Drivers may also query pin settings by calling the ptp_find_pin() method. Although the core subsystem protects concurrent access to the pin settings, the implementation places illogical restrictions on how drivers may call ptp_find_pin(). When enabling an auxiliary function via the .enable(on=1) callback, drivers may invoke the pin finding method, but when disabling with .enable(on=0) drivers are not permitted to do so. With the exception of the mv88e6xxx, all of the PHC drivers do respect this restriction, but still the locking pattern is both confusing and unnecessary. This patch changes the locking implementation to allow PHC drivers to freely call ptp_find_pin() from their .enable() and .verify() callbacks. V2 ChangeLog: - fixed spelling in the kernel doc - add Vladimir's tested by tag Signed-off-by: Richard Cochran <richardcochran@gmail.com> Reported-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30Merge tag 'for-5.7/libata-2020-03-29' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull libata updates from Jens Axboe: - Series from Bart, making the libata code smaller on PATA only setups. This is useful for smaller/embedded use cases, and will help us move some of those off drivers/ide. - Kill unused BPRINTK() (Hannes) - Add various Comet Lake ahci PCI ids (Kai-Heng, Mika) - Fix for a double scsi_host_put() in error handling (John) - Use scnprintf (Takashi) - Assign OF node to the SCSI device (Linus Walleij) * tag 'for-5.7/libata-2020-03-29' of git://git.kernel.dk/linux-block: (36 commits) ata: make "libata.force" kernel parameter optional ata: move ata_eh_analyze_ncq_error() & co. to libata-sata.c ata: start separating SATA specific code from libata-eh.c ata: move ata_sas_*() to libata-sata.c ata: start separating SATA specific code from libata-scsi.c ata: move sata_deb_timing_*() to libata-sata.c ata: move ata_qc_complete_multiple() to libata-sata.c ata: move sata_link_hardreset() to libata-sata.c ata: move sata_link_{debounce,resume}() to libata-sata.c ata: move *sata_set_spd*() to libata-sata.c ata: move sata_scr_*() to libata-sata.c ata: start separating SATA specific code from libata-core.c ata: let compiler optimize out ata_eh_set_lpm() on non-SATA hosts ata: let compiler optimize out ata_dev_config_ncq() on non-SATA hosts ata: add CONFIG_SATA_HOST=n version of ata_ncq_enabled() ata: separate PATA timings code from libata-core.c ata: fix CodingStyle issues in PATA timings code ata: remove EXPORT_SYMBOL_GPL()s not used by modules ata: move EXPORT_SYMBOL_GPL()s close to exported code ata: optimize ata_scsi_rbuf[] size ...
2020-03-30net: sched: expose HW stats types per action used by driversJiri Pirko
It may be up to the driver (in case ANY HW stats is passed) to select which type of HW stats he is going to use. Add an infrastructure to expose this information to user. $ tc filter add dev enp3s0np1 ingress proto ip handle 1 pref 1 flower dst_ip 192.168.1.1 action drop $ tc -s filter show dev enp3s0np1 ingress filter protocol ip pref 1 flower chain 0 filter protocol ip pref 1 flower chain 0 handle 0x1 eth_type ipv4 dst_ip 192.168.1.1 in_hw in_hw_count 2 action order 1: gact action drop random type none pass val 0 index 1 ref 1 bind 1 installed 10 sec used 10 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 used_hw_stats immediate <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30RDMA/bnxt_re: make bnxt_re_ib_init staticYueHaibing
Fix sparse warning: drivers/infiniband/hw/bnxt_re/main.c:1313:5: warning: symbol 'bnxt_re_ib_init' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200330110219.24448-1-yuehaibing@huawei.com Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-30Merge tag 'i3c/for-5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c updates from Boris Brezillon: - Fix driver auto-probing related issues - Stop using the deprecated i2c_new_device() function - Replace zero-length array with flexible-array member * tag 'i3c/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: convert to use i2c_new_client_device() i3c: master: Replace zero-length array with flexible-array member i3c: Simplify i3c_device_match_id() i3c: Generate aliases for i3c modules i3c: Add a modalias sysfs attribute i3c: Fix MODALIAS uevents i3c: master: no need to iterate master device twice
2020-03-30net: hns3: fix set and get link ksettings issueGuangbin Huang
When device is not open, the service task which update the port information per second is not running. In this case, the port capabilities, including speed ability, autoneg ability, media type, may be incorrect. Then get/set link ksetting may fail. This patch fixes it by updating the port information before getting/ setting link ksettings when device is not open, and start timer task immediately by setting delay time to 0 when device opens. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: hns3: fix RSS config lost after VF reset.Guojia Liao
Currently, VF's RSS configuration would be set to default after VF reset, the the user's one will loss. To fix it, this patch separates hclgevf_rss_init_hw() into two parts, one sets up the default RSS configuration and just be called when driver loading, one configures the hardware and be called by driver loading or reset. Fixes: d97b30721301 ("net: hns3: Add RSS tuples support for VF") Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: hns3: fix for fraglist SKB headlen not handling correctlyHuazhong Tan
When the fraglist SKB headlen is larger than zero, current code still handle the fraglist SKB linear data as frag data, which may cause TX error. This patch adds a new DESC_TYPE_FRAGLIST_SKB type to handle the mapping and unmapping of the fraglist SKB linear data buffer. Fixes: 8ae10cfb5089 ("net: hns3: support tx-scatter-gather-fraglist feature") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: hns3: drop the WQ_MEM_RECLAIM flag when allocating WQYunsheng Lin
The WQ in hns3 driver is allocated with WQ_MEM_RECLAIM flag in order to guarantee forward progress, which may cause hns3' WQ_MEM_RECLAIM WQ flushing infiniband' !WQ_MEM_RECLAIM WQ warning: [11246.200168] hns3 0000:bd:00.1: Reset done, hclge driver initialization finished. [11246.209979] hns3 0000:bd:00.1 eth7: net open [11246.227608] ------------[ cut here ]------------ [11246.237370] workqueue: WQ_MEM_RECLAIM hclge:hclge_service_task [hclge] is flushing !WQ_MEM_RECLAIM infiniband:0x0 [11246.237391] WARNING: CPU: 50 PID: 2279 at ./kernel/workqueue.c:2605 check_flush_dependency+0xcc/0x140 [11246.260412] Modules linked in: hclgevf hns_roce_hw_v2 rdma_test(O) hns3 xt_CHECKSUM iptable_mangle xt_conntrack ipt_REJECT nf_reject_ipv4 ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter bpfilter vfio_iommu_type1 vfio_pci vfio_virqfd vfio ib_isert iscsi_target_mod ib_ipoib ib_umad rpcrdma ib_iser libiscsi scsi_transport_iscsi aes_ce_blk crypto_simd cryptd aes_ce_cipher sunrpc nls_iso8859_1 crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce joydev input_leds hid_generic usbkbd usbmouse sbsa_gwdt usbhid usb_storage hid ses hclge hisi_zip hisi_hpre hisi_sec2 hnae3 hisi_qm ahci hisi_trng_v2 evbug uacce rng_core gpio_dwapb autofs4 hisi_sas_v3_hw megaraid_sas hisi_sas_main libsas scsi_transport_sas [last unloaded: hns_roce_hw_v2] [11246.325742] CPU: 50 PID: 2279 Comm: kworker/50:0 Kdump: loaded Tainted: G O 5.4.0-rc4+ #1 [11246.335181] Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDD, BIOS 2280-V2 CS V3.B140.01 12/18/2019 [11246.344802] Workqueue: hclge hclge_service_task [hclge] [11246.350007] pstate: 60c00009 (nZCv daif +PAN +UAO) [11246.354779] pc : check_flush_dependency+0xcc/0x140 [11246.359549] lr : check_flush_dependency+0xcc/0x140 [11246.364317] sp : ffff800268a73990 [11246.367618] x29: ffff800268a73990 x28: 0000000000000001 [11246.372907] x27: ffffcbe4f5868000 x26: ffffcbe4f5541000 [11246.378196] x25: 00000000000000b8 x24: ffff002fdd0ff868 [11246.383483] x23: ffff002fdd0ff800 x22: ffff2027401ba600 [11246.388770] x21: 0000000000000000 x20: ffff002fdd0ff800 [11246.394059] x19: ffff202719293b00 x18: ffffcbe4f5541948 [11246.399347] x17: 000000006f8ad8dd x16: 0000000000000002 [11246.404634] x15: ffff8002e8a734f7 x14: 6c66207369205d65 [11246.409922] x13: 676c63685b206b73 x12: 61745f6563697672 [11246.415208] x11: 65735f65676c6368 x10: 3a65676c6368204d [11246.420494] x9 : 49414c4345525f4d x8 : 6e6162696e69666e [11246.425782] x7 : 69204d49414c4345 x6 : ffffcbe4f5765145 [11246.431068] x5 : 0000000000000000 x4 : 0000000000000000 [11246.436355] x3 : 0000000000000030 x2 : 00000000ffffffff [11246.441642] x1 : 3349eb1ac5310100 x0 : 0000000000000000 [11246.446928] Call trace: [11246.449363] check_flush_dependency+0xcc/0x140 [11246.453785] flush_workqueue+0x110/0x410 [11246.457691] ib_cache_cleanup_one+0x54/0x468 [11246.461943] __ib_unregister_device+0x70/0xa8 [11246.466279] ib_unregister_device+0x2c/0x40 [11246.470455] hns_roce_exit+0x34/0x198 [hns_roce_hw_v2] [11246.475571] __hns_roce_hw_v2_uninit_instance.isra.56+0x3c/0x58 [hns_roce_hw_v2] [11246.482934] hns_roce_hw_v2_reset_notify+0xd8/0x210 [hns_roce_hw_v2] [11246.489261] hclge_notify_roce_client+0x84/0xe0 [hclge] [11246.494464] hclge_reset_rebuild+0x60/0x730 [hclge] [11246.499320] hclge_reset_service_task+0x400/0x5a0 [hclge] [11246.504695] hclge_service_task+0x54/0x698 [hclge] [11246.509464] process_one_work+0x15c/0x458 [11246.513454] worker_thread+0x144/0x520 [11246.517186] kthread+0xfc/0x128 [11246.520314] ret_from_fork+0x10/0x18 [11246.523873] ---[ end trace eb980723699c2585 ]--- [11246.528710] hns3 0000:bd:00.2: Func clear success after reset. [11246.528747] hns3 0000:bd:00.0: Func clear success after reset. [11246.907710] hns3 0000:bd:00.1 eth7: link up According to [1] and [2]: There seems to be no specific guidance about how to handling the forward progress guarantee of network device's WQ yet, and other network device's WQ seem to be marked with WQ_MEM_RECLAIM without a clear reason. So this patch removes the WQ_MEM_RECLAIM flag when allocating WQ to aviod the above warning. 1. https://www.spinics.net/lists/netdev/msg631646.html 2. https://www.spinics.net/lists/netdev/msg632097.html Fixes: 0ea68902256e ("net: hns3: allocate WQ with WQ_MEM_RECLAIM flag") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30Merge tag 'tpmdd-next-20200316' of git://git.infradead.org/users/jjs/linux-tpmddLinus Torvalds
Pull tpm updates from Jarkko Sakkinen: "tpmdd updates for Linux v5.7" * tag 'tpmdd-next-20200316' of git://git.infradead.org/users/jjs/linux-tpmdd: KEYS: reaching the keys quotas correctly tpm: ibmvtpm: Add support for TPM2 tpm: ibmvtpm: Wait for buffer to be set before proceeding tpm: of: Handle IBM,vtpm20 case when getting log parameters MAINTAINERS: adjust to trusted keys subsystem creation tpm: tpm_tis_spi_cr50: use new structure for SPI transfer delays tpm_tis_spi: use new 'delay' structure for SPI transfer delays tpm: tpm2_bios_measurements_next should increase position index tpm: tpm1_bios_measurements_next should increase position index tpm: Don't make log failures fatal
2020-03-30net: ena: Make some functions staticYueHaibing
Fix sparse warnings: drivers/net/ethernet/amazon/ena/ena_netdev.c:460:6: warning: symbol 'ena_xdp_exchange_program_rx_in_range' was not declared. Should it be static? drivers/net/ethernet/amazon/ena/ena_netdev.c:481:6: warning: symbol 'ena_xdp_exchange_program' was not declared. Should it be static? drivers/net/ethernet/amazon/ena/ena_netdev.c:1555:5: warning: symbol 'ena_xdp_handle_buff' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30dpaa_eth: Make dpaa_a050385_wa staticYueHaibing
Fix sparse warning: drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:2065:5: warning: symbol 'dpaa_a050385_wa' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30crypto/chtls: Fix chtls crash in connection cleanupRohit Maheshwari
There is a possibility that cdev is removed before CPL_ABORT_REQ_RSS is fully processed, so it's better to save it in skb. Added checks in handling the flow correctly, which suggests connection reset request is sent to HW, wait for HW to respond. Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30crypto/chcr: fix incorrect ipv6 packet lengthRohit Maheshwari
IPv6 header's payload length field shouldn't include IPv6 header length. Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: stmmac: Add support for VLAN Rx filteringWong Vee Khee
Add support for VLAN ID-based filtering by the MAC controller for MAC drivers that support it. Only the 12-bit VID field is used. Signed-off-by: Chuah Kim Tatt <kim.tatt.chuah@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30Crypto: chelsio - Fixes a deadlock between rtnl_lock and uld_mutexAyush Sawal
The locks are taken in this order during driver registration (uld_mutex), at: cxgb4_register_uld.part.14+0x49/0xd60 [cxgb4] (rtnl_mutex), at: rtnetlink_rcv_msg+0x2db/0x400 (uld_mutex), at: cxgb_up+0x3a/0x7b0 [cxgb4] (rtnl_mutex), at: chcr_add_xfrmops+0x83/0xa0 [chcr](stucked here) To avoid this now the netdev features are updated after the cxgb4_register_uld function is completed. Fixes: 6dad4e8ab3ec6 ("chcr: Add support for Inline IPSec"). Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30Crypto: chelsio - Fixes a hang issue during driver registrationAyush Sawal
This issue occurs only when multiadapters are present. Hang happens because assign_chcr_device returns u_ctx pointer of adapter which is not yet initialized as for this adapter cxgb_up is not been called yet. The last_dev pointer is used to determine u_ctx pointer and it is initialized two times in chcr_uld_add in chcr_dev_add respectively. The fix here is don't initialize the last_dev pointer during chcr_uld_add. Only assign to value to it when the adapter's initialization is completed i.e in chcr_dev_add. Fixes: fef4912b66d62 ("crypto: chelsio - Handle PCI shutdown event"). Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: ethernet: ti: fix spelling mistake "rundom" -> "random"Colin Ian King
There is a spelling mistake in a dev_err error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30xen-pciback: fix INTERRUPT_TYPE_* definesMarek Marczykowski-Górecki
xen_pcibk_get_interrupt_type() assumes INTERRUPT_TYPE_NONE being 0 (initialize ret to 0 and return as INTERRUPT_TYPE_NONE). Fix the definition to make INTERRUPT_TYPE_NONE really 0, and also shift other values to not leave holes. But also, do not assume INTERRUPT_TYPE_NONE being 0 anymore to avoid similar confusions in the future. Fixes: 476878e4b2be ("xen-pciback: optionally allow interrupt enable flag writes") Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2020-03-30xen/xenbus: remove unused xenbus_map_ring()Juergen Gross
xenbus_map_ring() is used nowhere in the tree, remove it. xenbus_unmap_ring() is used only locally, so make it static and move it up. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2020-03-30PCI: sysfs: Revert "rescan" file renamesKelsey Skunberg
We changed these sysfs filenames: .../pci_bus/<domain:bus>/rescan -> .../pci_bus/<domain:bus>/bus_rescan .../<domain:bus:dev.fn>/rescan -> .../<domain:bus:dev.fn>/dev_rescan and Ruslan reported [1] that this broke a userspace application. Revert these name changes so both files are named "rescan" again. Note that we have to use __ATTR() to assign custom C symbols, i.e., "struct device_attribute <symbol>". [1] https://lore.kernel.org/r/CAB=otbSYozS-ZfxB0nCiNnxcbqxwrHOSYxJJtDKa63KzXbXgpw@mail.gmail.com [bhelgaas: commit log, use __ATTR() both places so we don't have to rename the attributes] Fixes: 8bdfa145f582 ("PCI: sysfs: Define device attributes with DEVICE_ATTR*()") Fixes: 4e2b79436e4f ("PCI: sysfs: Change DEVICE_ATTR() to DEVICE_ATTR_WO()") Link: https://lore.kernel.org/r/20200325151708.32612-1-skunberg.kelsey@gmail.com Signed-off-by: Kelsey Skunberg <kelsey.skunberg@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org # v5.4+
2020-03-30PCI: Add support for root bus sizingIvan Kokshaysky
In certain cases we should be able to enumerate IO and MEM ranges of all PCI devices installed in the system, and then set respective host bridge apertures basing on calculated size and alignment. Particularly when firmware is broken and fails to assign bridge windows properly, like on Alpha UP1500 platform. Actually, almost everything is already in place, and required changes are minimal: - add "size_windows" flag to struct pci_host_bridge: when set, it instructs __pci_bus_size_bridges() to continue with the root bus; - in the __pci_bus_size_bridges() path: add checks for bus->self, as it can legitimately be null for the root bus. Link: https://lore.kernel.org/r/20200314194355.GA12510@mail.rc.ru Tested-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-30PCI: Use ioremap(), not phys_to_virt() for platform ROMMikel Rychliski
On some EFI systems, the video BIOS is provided by the EFI firmware. The boot stub code stores the physical address of the ROM image in pdev->rom. Currently we attempt to access this pointer using phys_to_virt(), which doesn't work with CONFIG_HIGHMEM. On these systems, attempting to load the radeon module on a x86_32 kernel can result in the following: BUG: unable to handle page fault for address: 3e8ed03c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP CPU: 0 PID: 317 Comm: systemd-udevd Not tainted 5.6.0-rc3-next-20200228 #2 Hardware name: Apple Computer, Inc. MacPro1,1/Mac-F4208DC8, BIOS MP11.88Z.005C.B08.0707021221 07/02/07 EIP: radeon_get_bios+0x5ed/0xe50 [radeon] Code: 00 00 84 c0 0f 85 12 fd ff ff c7 87 64 01 00 00 00 00 00 00 8b 47 08 8b 55 b0 e8 1e 83 e1 d6 85 c0 74 1a 8b 55 c0 85 d2 74 13 <80> 38 55 75 0e 80 78 01 aa 0f 84 a4 03 00 00 8d 74 26 00 68 dc 06 EAX: 3e8ed03c EBX: 00000000 ECX: 3e8ed03c EDX: 00010000 ESI: 00040000 EDI: eec04000 EBP: eef3fc60 ESP: eef3fbe0 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010206 CR0: 80050033 CR2: 3e8ed03c CR3: 2ec77000 CR4: 000006d0 Call Trace: r520_init+0x26/0x240 [radeon] radeon_device_init+0x533/0xa50 [radeon] radeon_driver_load_kms+0x80/0x220 [radeon] drm_dev_register+0xa7/0x180 [drm] radeon_pci_probe+0x10f/0x1a0 [radeon] pci_device_probe+0xd4/0x140 Fix the issue by updating all drivers which can access a platform provided ROM. Instead of calling the helper function pci_platform_rom() which uses phys_to_virt(), call ioremap() directly on the pdev->rom. radeon_read_platform_bios() previously directly accessed an __iomem pointer. Avoid this by calling memcpy_fromio() instead of kmemdup(). pci_platform_rom() now has no remaining callers, so remove it. Link: https://lore.kernel.org/r/20200319021623.5426-1-mikel@mikelr.com Signed-off-by: Mikel Rychliski <mikel@mikelr.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-30Merge branches 'acpi-ec', 'acpi-fan' and 'acpi-pci'Rafael J. Wysocki
* acpi-ec: ACPI: EC: Eliminate EC_FLAGS_QUERY_HANDSHAKE ACPI: EC: Do not clear boot_ec_is_ecdt in acpi_ec_add() ACPI: EC: Simplify acpi_ec_ecdt_start() and acpi_ec_init() ACPI: EC: Consolidate event handler installation code ACPI: EC: Use fast path in acpi_ec_add() for DSDT boot EC ACPI: EC: Simplify acpi_ec_add() ACPI: EC: Drop AE_NOT_FOUND special case from ec_install_handlers() ACPI: EC: Avoid passing redundant argument to functions ACPI: EC: Avoid printing confusing messages in acpi_ec_setup() * acpi-fan: ACPI: fan: Use scnprintf() for avoiding potential buffer overflow * acpi-pci: ACPI: PCI: Use scnprintf() for avoiding potential buffer overflow
2020-03-30Merge branches 'acpi-button', 'acpi-battery', 'acpi-osl', 'acpi-video' and ↵Rafael J. Wysocki
'acpi-misc' * acpi-button: ACPI: Add new tiny-power-button driver to directly signal init ACPI: button: move HIDs to acpi/button.h * acpi-battery: ACPI / battery: Cleanup Lenovo Ideapad Miix 320 DMI table entry ACPI / AC: Cleanup DMI quirk table * acpi-osl: ACPI: OSL: Add missing __acquires/__releases annotations * acpi-video: ACPI: video: remove redundant assignments to variable result * acpi-misc: ACPI: list_for_each_safe() -> list_for_each_entry_safe()
2020-03-30Merge branch 'acpica'Rafael J. Wysocki
* acpica: ACPICA: Update version to 20200214 ACPICA: Fix a couple of typos ACPICA: use acpi_size instead of u32 for prefix_path_length ACPICA: cast length arguement to acpi_ns_build_normalized_path() as u32 ACPICA: cast the result of the pointer difference to u32 ACPICA: Table Manager: Update comments in a function header ACPICA: Enable sleep button on ACPI legacy wake ACPICA: Fix a comment "enable" fixed events -> "disable" all fixed events. ACPICA: ASL-ASL+ converter: make root file a parameter for cv_init_file_tree ACPICA: ASL-ASL+ converter: remove function parameters from cv_init_file_tree()
2020-03-30ACPICA: Fixes for acpiExec namespace init fileBob Moore
This is the result of squashing the following ACPICA commit ID's: 6803997e5b4f3635cea6610b51ff69e29d251de3 f31cdf8bfda22fe265c1a176d0e33d311c82a7f7 This change fixes several problems with the support for the acpi_exec namespace init file (-fi option). Specifically, it fixes AE_ALREADY_EXISTS errors, as well as various seg faults. Link: https://github.com/acpica/acpica/commit/f31cdf8b Link: https://github.com/acpica/acpica/commit/6803997e Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-30ACPICA: Add NHLT table signatureCezary Rojewski
ACPICA commit 422166b656565d180bb3aac712009bdce5e70cdd NHLT (Non-HDAudio Link Table) provides configuration of audio endpoints for Intel SST (Smart Sound Technology) DSP products. Similarly to other ACPI tables, data provided by BIOS may not describe it correctly, thus overriding is required. ACPI override mechanism checks for unknown signature before proceeding. Update known signatures array to support NHLT. Link: https://github.com/acpica/acpica/commit/422166b6 Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-30ACPICA: utilities: fix sprintf()John Levon
This contains changes for the following ACPICA commit ID's: 8f99a6ccd3b8e5c3d3d68c53fdbb054c2477eeb4 d30647af53abd334cbcf6362387464ea647bac9e d3c5fb4cf5b2880d789c987eb847fc3de3774abc On 32-bit, the provided sprintf() is non-functional: with a size of ACPI_UINT32_MAX, String + Size will wrap, meaning End < Start, and acpi_ut_bound_string_output() will never output anything as a result. The symptom we saw of this was acpixtract failing to output anything. Link: https://github.com/acpica/acpica/commit/8f99a6cc Link: https://github.com/acpica/acpica/commit/d30647af Link: https://github.com/acpica/acpica/commit/d3c5fb4c Signed-off-by: MSathieu <18145111+MSathieu@users.noreply.github.com> Signed-off-by: John Levon <john.levon@joyent.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-30ACPICA: acpiexec: remove redeclaration of acpi_gbl_db_opt_no_region_supportErik Kaneda
ACPICA commit 825c53661cacc7e3dab4844588201846143bd1b7 This variable was re-defined in a file specific to acpiexec. Remove the redundant declaration and move the initialize to the debugger. Patch based on suggestions by David Seifert and Benjamin Berg. Link: https://github.com/acpica/acpica/commit/825c5366 Reported-by: David Seifert <soap@gentoo.org> Reported-by: Benjamin Berg <bberg@redhat.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-30ACPICA: Change PlatformCommChannel ASL keyword to PCCErik Kaneda
ACPICA commit 811e69a59cb4189ebf8b882eba74c881f598a239 The former was proposed during specification discussions but it was dropped. This keyword was introduced to the ACPICA code base by mistake so this commit changes the keyword representing Platform Communication Channel to be PCC. Link: https://github.com/acpica/acpica/commit/811e69a5 Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-30Merge branches 'pm-devfreq', 'powercap' and 'pm-docs'Rafael J. Wysocki
* pm-devfreq: PM / devfreq: Get rid of some doc warnings PM / devfreq: Fix handling dev_pm_qos_remove_request result PM / devfreq: Fix a typo in a comment PM / devfreq: Change to DEVFREQ_GOV_UPDATE_INTERVAL event name PM / devfreq: Remove unneeded extern keyword PM / devfreq: Use constant name of userspace governor * powercap: powercap: idle_inject: Replace zero-length array with flexible-array member * pm-docs: docs: cpu-freq: convert cpufreq-stats.txt to ReST docs: cpu-freq: convert cpu-drivers.txt to ReST docs: cpu-freq: convert core.txt to ReST docs: cpu-freq: convert index.txt to ReST docs: cpufreq: fix a broken reference Documentation: cpufreq: Move legacy driver documentation
2020-03-30Merge branches 'pm-core', 'pm-sleep', 'pm-acpi' and 'pm-domains'Rafael J. Wysocki
* pm-core: PM: runtime: Add pm_runtime_get_if_active() * pm-sleep: PM: sleep: wakeup: Skip wakeup_source_sysfs_remove() if device is not there PM / hibernate: Remove unnecessary compat ioctl overrides PM: hibernate: fix docs for ioctls that return loff_t via pointer PM: sleep: wakeup: Use built-in RCU list checking PM: sleep: core: Use built-in RCU list checking * pm-acpi: ACPI: PM: s2idle: Refine active GPEs check ACPICA: Allow acpi_any_gpe_status_set() to skip one GPE ACPI: PM: s2idle: Fix comment in acpi_s2idle_prepare_late() * pm-domains: cpuidle: psci: Split psci_dt_cpu_init_idle() PM / Domains: Allow no domain-idle-states DT property in genpd when parsing
2020-03-30Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: intel_pstate: Simplify intel_pstate_cpu_init() cpufreq: qcom: Add support for krait based socs cpufreq: imx6q-cpufreq: Improve the logic of -EPROBE_DEFER handling cpufreq: Use scnprintf() for avoiding potential buffer overflow Documentation: intel_pstate: update links for references cpufreq: intel_pstate: Consolidate policy verification cpufreq: dt: Allow platform specific intermediate callbacks cpufreq: imx-cpufreq-dt: Correct i.MX8MP's market segment fuse location cpufreq: imx6q: read OCOTP through nvmem for imx6q cpufreq: imx6q: fix error handling cpufreq: imx-cpufreq-dt: Add "cpu-supply" property check cpufreq: ti-cpufreq: Add support for OPP_PLUS cpufreq: imx6q: Fixes unwanted cpu overclocking on i.MX6ULL
2020-03-30Merge branch 'pm-cpuidle'Rafael J. Wysocki
* pm-cpuidle: cpuidle: haltpoll: allow force loading on hosts without the REALTIME hint intel_idle: Update copyright notice, known limitations and version intel_idle: Define CPUIDLE_FLAG_TLB_FLUSHED as BIT(16) intel_idle: Clean up kerneldoc comments for multiple functions intel_idle: Reorder declarations of static variables intel_idle: Annotate init time data structures intel_idle: Add __initdata annotations to init time variables intel_idle: Relocate definitions of cpuidle callbacks intel_idle: Clean up definitions of cpuidle callbacks intel_idle: Simplify LAPIC timer reliability checks
2020-03-30Merge branch 'pm-qos'Rafael J. Wysocki
* pm-qos: (30 commits) PM: QoS: annotate data races in pm_qos_*_value() Documentation: power: fix pm_qos_interface.rst format warning PM: QoS: Make CPU latency QoS depend on CONFIG_CPU_IDLE Documentation: PM: QoS: Update to reflect previous code changes PM: QoS: Update file information comments PM: QoS: Drop PM_QOS_CPU_DMA_LATENCY and rename related functions sound: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: usb: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: tty: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: spi: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: net: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: mmc: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: media: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: hsi: Call cpu_latency_qos_*() instead of pm_qos_*() drm: i915: Call cpu_latency_qos_*() instead of pm_qos_*() x86: platform: iosf_mbi: Call cpu_latency_qos_*() instead of pm_qos_*() cpuidle: Call cpu_latency_qos_limit() instead of pm_qos_request() PM: QoS: Add CPU latency QoS API wrappers PM: QoS: Adjust pm_qos_request() signature and reorder pm_qos.h PM: QoS: Simplify definitions of CPU latency QoS trace events ...
generated by cgit (git 2.34.1) at 2025-09-20 05:52:09 +0000