summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-04-14power: bq24190_charger: Check the interrupt status on resumeTony Lindgren
Some SoCs like omap3 can configure GPIO irqs to use Linux generic dedicated wakeirq support. If the dedicated wakeirq is configured, the SoC will use a always-on interrupt controller to produce wake-up events. If bq24190 is configured for dedicated wakeirq, we need to check the interrupt status on PM runtime resume. This is because the Linux generic wakeirq will call pm_runtime_resume() on the device on a wakeirq. And as the bq24190 interrupt is falling edge sensitive and only active for 250 us, there will be no device interrupt seen by the runtime SoC IRQ controller. Note that this can cause spurious interrupts on omap3 devices with bq24190 connected to gpio banks 2 - 5 as there's a glitch on those pins waking from off mode as listed in "Advisory 1.45". Devices with this issue should not configure the optional wakeirq interrupt in the dts file. Acked-by: Mark Greer <mgreer@animalcreek.com> Acked-by: Liam Breck <kernel@networkimprov.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-04-13netlink: pass extended ACK struct where availableJohannes Berg
This is an add-on to the previous patch that passes the extended ACK structure where it's already available by existing genl_info or extack function arguments. This was done with this spatch (with some manual adjustment of indentation): @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, info->extack) ... } @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, info->extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse(A, B, C, D, E, NULL) +nla_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ... } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_validate(A, B, C, D, NULL) +nlmsg_validate(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate(A, B, C, D, NULL) +nla_validate(A, B, C, D, extack) ...> } @@ expression A, B, C; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate_nested(A, B, C, NULL) +nla_validate_nested(A, B, C, extack) ...> } Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: pass extended ACK struct to parsing functionsJohannes Berg
Pass the new extended ACK reporting struct to all of the generic netlink parsing functions. For now, pass NULL in almost all callers (except for some in the core.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: extended ACK reportingJohannes Berg
Add the base infrastructure and UAPI for netlink extended ACK reporting. All "manual" calls to netlink_ack() pass NULL for now and thus don't get extended ACK reporting. Big thanks goes to Pablo Neira Ayuso for not only bringing up the whole topic at netconf (again) but also coming up with the nlattr passing trick and various other ideas. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13bonding: handle link transition from FAIL to UP correctlyMahesh Bandewar
When link transitions from LINK_FAIL to LINK_UP, the commit phase is not called. This leads to an erroneous state causing slave-link state to get stuck in "going down" state while its speed and duplex are perfectly fine. This issue is a side-effect of splitting link-set into propose and commit phases introduced by de77ecd4ef02 ("bonding: improve link-status update in mii-monitoring") This patch fixes these issues by calling commit phase whenever link state change is proposed. Fixes: de77ecd4ef02 ("bonding: improve link-status update in mii-monitoring") Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13net: dwc-xlgmac: add the initial ethtool supportJie Deng
It is necessary to provide ethtool support for displaying and modifying parameters of dwc-xlgmac. Signed-off-by: Jie Deng <jiedeng@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13bluetooth: hci_uart: add LL protocol serdev driver supportRob Herring
Turns out that the LL protocol and the TI-ST are the same thing AFAICT. The TI-ST adds firmware loading, GPIO control, and shared access for NFC, FM radio, etc. For now, we're only implementing what is needed for BT. This mirrors other drivers like BCM and Intel, but uses the new serdev bus. The firmware loading is greatly simplified by using existing infrastructure to send commands. It may be a bit slower than the original code using synchronous functions, but the real bottleneck is likely doing firmware load at 115.2kbps. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-13bluetooth: hci_uart: remove unused hci_uart_init_ttyRob Herring
There are no users of hci_uart_init_tty, so remove it. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-13net: stmmac: set total length of the packet to be transmitted in TDES3Niklas Cassel
Field FL/TPL in register TDES3 is not correctly set on GMAC4. TX appears to be functional on GMAC 4.10a even if this field is not set, however, to avoid relying on undefined behavior, set the length in TDES3. The field has a different meaning depending on if the TSE bit in TDES3 is set or not (TSO). However, regardless of the TSE bit, the field is not optional. The field is already set correctly when the TSE bit is set. Since there is no limit for the number of descriptors that can be used for a single packet, the field should be set to the sum of the buffers contained in: [<desc with First Descriptor bit set> ... <desc n> ... <desc with Last Descriptor bit set>], which should be equal to skb->len. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13cxgb4: save tid while creating server filterGanesh Goudar
Save the filter tid while creating the server filter, which is used later to retrieve the corresponding filter instance while handling the filter reply. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13drivers: net: usb: qmi_wwan: add QMI_QUIRK_SET_DTR for Telit PID 0x1201Daniele Palmas
Telit LE920A4 uses the same pid 0x1201 of LE920, but modem implementation is different, since it requires DTR to be set for answering to qmi messages. This patch replaces QMI_FIXED_INTF with QMI_QUIRK_SET_DTR: tests on LE920 have been performed in order to verify backward compatibility. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13Revert "ACPICA: Resources: Not a valid resource if buffer length too long"Rafael J. Wysocki
Revert commit 57707a9a7780 (ACPICA: Resources: Not a valid resource if buffer length too long) as it is reported to prevent the TPM module from loading on Lenovo X60 with Coreboot. It also causes new confusing warnings to show up in the kernel log. Link: https://bugzilla.kernel.org/show_bug.cgi?id=195311 Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-13Merge tag 'pinctrl-v4.11-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Two pin control fixes arriving late, these are hopefully the last pin control fixes I send this kernel cycle. A Chromebook and an Exynos SoC thingie. The Exynos patch is pretty big, it is fixing unbroken a breakage caused by yours truly when trying to figure out the merge mess with the different Samsung platforms for this merge window. Sorry about that. We have countered this situation by assigning a Samsung pin control submaintainer to catch stuff earlier. Summary: - Make the Acer Chromebook keyboard work again with the Intel Cherryview driver. - Fix a merge error in the Exynos 5433 driver" * tag 'pinctrl-v4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: cherryview: Add a quirk to make Acer Chromebook keyboard work again pinctrl: samsung: Add missing part for PINCFG_TYPE_DRV of Exynos5433
2017-04-13net: mvmdio: allow up to three clocks to be specified for orion-mdioRussell King
Allow up to three clocks to be specified and enabled for the orion-mdio interface, which are required for this interface to be accessible on Armada 8k platforms. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13net: mvmdio: disable interrupt if resource size is too smallRussell King
Disable the MDIO interrupt, falling back to polled mode, if the resource size does not allow us to access the interrupt registers. All current DT bindings use a size of 0x84, which allows access, but verifying it is good practice. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13net: mvmdio: fix interrupt disable in remove pathRussell King
The pre-existing write to disable interrupts on the remove path happens whether we have an interrupt or not. While this may seem to be a good idea, this driver is re-used in many different implementations, some where the binding only specifies four bytes of register space. This access causes us to access registers outside of the binding. Make it conditional on the interrupt being present, which is the same condition used when enabling the interrupt in the first place. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13net: mvmdio: disable interrupts in driver failure pathRussell King
When the mvmdio driver has an interrupt, it enables the "done" interrupt after requesting its interrupt handler. However, probe failure results in the interrupt being left enabled. Disable it on the failure path. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13rt2x00: reverse external PA capability flag logicDaniel Golle
Consequently refer to external PA instead of inverting the logic and use an internal PA capability flag which is a bit confusing. Currently this is used for Rt3352 only, but MT7620A also allows for an external PA which will be supported by a follow up patch. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: avoid LPS/IPS mismatch for pnp notifyYan-Hsuan Chuang
When driver is going to sleep, it does not leave LPS/IPS, thus the BTCoex may have mismatch when driver wakes up. To avoid that, BTCoex needs to clear the IPS/LPS state when it receives a pnp notify, then it can properly set up the hw when driver wakes up. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: do not switch antenna when wifi is under 5G channelYan-Hsuan Chuang
When wifi is on a 5G channel, the 5G signal will not interfere bt 2.4G signal, and they can transmit simultaneously, hence there is no need to switch antenna between wifi and bt. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: monitor bt profiling when scanYan-Hsuan Chuang
When wifi is scanning and not connected, set the tdma and coex table properly to control the priority of the packets to make the wifi bt coexistence operate smoothly Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: consider more cases when bt inquiryYan-Hsuan Chuang
With bt inquiry, the wifi may start as a softap or the wifi and bt are busy, we take these scenarios into consider to avoid bt inquiry to degrade the performance of the network Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: move bt_disabled to global structYan-Hsuan Chuang
Move the bt disable flag to a global structure to indicate that bt is turned off. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: If wifi only, do not initiate coex mechanismYan-Hsuan Chuang
If the device has wifi mode only, there is no need to initiate the hardware for wifi and bt coexistence, so just return to avoid it. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: action when associating/authenticatingYan-Hsuan Chuang
When wifi is associating or authenticating, set the coex table for wifi to establish link. These packets should have higher priority. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: add multi port action for miracast and P2PYan-Hsuan Chuang
To support miracast and P2P, the chip may operate under concurrent mode, In this situation, do not aggregate tx packet and properly set the rx aggregation size. We detect it by monitoring the number of link established. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: set antenna control path for PTAYan-Hsuan Chuang
Set antenna control path if PTA is in control of the packet path of wifi and bt. If wifi is turned off, tell the PTA about it. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: remove setting for 2 antennasYan-Hsuan Chuang
The antenna position setting is useless for 1 antenna chip. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: mask profile bit for connect-ildeYan-Hsuan Chuang
Mask out the connect-idle bit. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: coex table setting for new fwYan-Hsuan Chuang
For newer fw, the coex table setting needs to be modified to operate correctly. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: add function to check wifi statusYan-Hsuan Chuang
This function checks if wifi has changed its statusi. It will be needed in the future. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: fw settings for softap modeYan-Hsuan Chuang
For ap mode, adjust fw settings to operate properly. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: some hi-prio pkt will cause hid_existYan-Hsuan Chuang
Clear the hid_exist flag by monitoring the packet counter. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: notify more bt informationYan-Hsuan Chuang
These bt information are displayed in display coex Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: fine tune for bt hid_a2dpYan-Hsuan Chuang
Let bt control the aggregation size to improve stability. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: fine tune for bt pan_edr_a2dpYan-Hsuan Chuang
If we don't limit the rx aggregation size, and set tdma instead, the bt profile can get more stable. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: before firmware ready settingsYan-Hsuan Chuang
Before firmware is ready, set GNT_BT to high to let bt transmit Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: power on settings for coexYan-Hsuan Chuang
When power on, the wifi could be initiating, force the antenna to transmit bt packets to avoid bt unstable problems Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: wifi is not actually off in mp modeYan-Hsuan Chuang
In mp mode, the wifi will not turn off and still has control of the PTA, so the driver needs to distinguish whether it is mp mode or not Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: need those information when scanYan-Hsuan Chuang
For scan notify, we need to supervise some registers to make sure that coexistence is operating as we expected. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: remove debugging code for 0x948Yan-Hsuan Chuang
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: treat too many low prio packets as retryYan-Hsuan Chuang
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: set coex table when wifi is idleYan-Hsuan Chuang
When wifi is idle, the bt should have more resource to transmit. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: set coex table when wifi is linkingYan-Hsuan Chuang
When wifi is under linking process, those packets are important. Mark them as high priority to protect the linking process Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: turn off antenna when rssi is too high/lowYan-Hsuan Chuang
For 2-antenna combo card, the signal of the neighbor antenna could be over noise level and cause be severe interference. So we monitor the rssi and turn off one of the antennas when the other is transmitting and the rssi level is beyond a threshold. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: turn off ps and tdma mechanism when in concurrent ↵Yan-Hsuan Chuang
mode When wifi is in concurrent mode, we can not distinguish if it is the real PS or just a fake one by sending null data, so we turn it off in case of miracast scenario. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: let bt transmit when hw initialisation doneYan-Hsuan Chuang
During hw initialisation, wifi may be ready after bt has already been ready, which causes bt to act abnormally. To avoid this, set GNT_BT to high during hw init. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Stable <stable@vger.kernel.org> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: tell fw if external or internal switch is usedYan-Hsuan Chuang
Some chips use an external antenna switch, but fw may not realize it. Here we tell fw exactly that which type of switch we are using. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: workaround for bt a2dp and hidYan-Hsuan Chuang
For a2dp and hid, we need extra process to avoid voice degradation Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: check more cases when bt is queuingYan-Hsuan Chuang
If bt is queing, we need to set the packet priority properly. Originally we only consider if wifi was connected or not, but now we also consider if bt is under abnormal scan or wifi is scanning, roaming or linking, and set the coex table. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-23 13:51:22 +0000