| Age | Commit message (Collapse) | Author |
|---|
|
PCI resource fitting code in __assign_resources_sorted() runs in multiple
steps. A resource that was successfully assigned may have to be released
before the next step attempts assignment again. The assign+release cycle is
destructive to a start-aligned struct resource (bridge window or IOV
resource) because the start field is overwritten with the real address when
the resource got assigned.
One symptom:
pci 0002:00:00.0: bridge window [mem size 0x00100000]: can't assign; bogus alignment
Properly restore the resource after releasing it. The start, end, and flags
fields must be stored into the related struct pci_dev_resource in order to
be able to restore the resource to its original state.
Fixes: 96336ec70264 ("PCI: Perform reset_resource() and build fail list in sync")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/r/01eb7d40-f5b5-4ec5-b390-a5c042c30aff@roeck-us.net/
Reported-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Closes: https://lore.kernel.org/r/3578030.5fSG56mABF@workhorse
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Ondrej Jirman <megi@xff.cz>
Link: https://patch.msgid.link/20250403093137.1481-1-ilpo.jarvinen@linux.intel.com
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device ids for 6.15-rc3
Here's a new simple driver for Owon oscilloscopes and a couple of new
new modem and smart meter device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.15-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: simple: add OWON HDS200 series oscilloscope support
USB: serial: ftdi_sio: add support for Abacus Electrics Optical Probe
USB: serial: option: add Sierra Wireless EM9291
|
|
The PXP terminate debugfs currently unconditionally simulates a
termination, no matter what the HW status is. This is unneeded if PXP is
not in use and can cause errors if the HW init hasn't completed yet.
To solve these issues, we can simply limit the terminations to the cases
where PXP is fully initialized and in use.
v2: s/pxp_status/ready/ to avoid confusion with pxp->status (John)
Fixes: 385a8015b214 ("drm/xe/pxp: Add PXP debugfs support")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4749
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250416201622.1295369-1-daniele.ceraolospurio@intel.com
(cherry picked from commit ba1f62a0cac84757ca35f4217e3cd3a2654233ae)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The is_vram() is checking the current placement, however if we consider
exported VRAM with dynamic dma-buf, it looks possible for the xe driver
to async evict the memory, notifying the importer, however importer does
not have to call unmap_attachment() immediately, but rather just as
"soon as possible", like when the dma-resv idles. Following from this we
would then pipeline the move, attaching the fence to the manager, and
then update the current placement. But when the unmap_attachment() runs
at some later point we might see that is_vram() is now false, and take
the complete wrong path when dma-unmapping the sg, leading to
explosions.
To fix this check if the sgl was mapping a struct page.
v2:
- The attachment can be mapped multiple times it seems, so we can't
really rely on encoding something in the attachment->priv. Instead
see if the page_link has an encoded struct page. For vram we expect
this to be NULL.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4563
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250410162716.159403-2-matthew.auld@intel.com
(cherry picked from commit d755887f8e5a2a18e15e6632a5193e5feea18499)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
User is reporting what smells like notifier vs folio deadlock, where
migrate_pages_batch() on core kernel side is holding folio lock(s) and
then interacting with the mappings of it, however those mappings are
tied to some userptr, which means calling into the notifier callback and
grabbing the notifier lock. With perfect timing it looks possible that
the pages we pulled from the hmm fault can get sniped by
migrate_pages_batch() at the same time that we are holding the notifier
lock to mark the pages as accessed/dirty, but at this point we also want
to grab the folio locks(s) to mark them as dirty, but if they are
contended from notifier/migrate_pages_batch side then we deadlock since
folio lock won't be dropped until we drop the notifier lock.
Fortunately the mark_page_accessed/dirty is not really needed in the
first place it seems and should have already been done by hmm fault, so
just remove it.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4765
Fixes: 0a98219bcc96 ("drm/xe/hmm: Don't dereference struct page pointers without notifier lock")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250414132539.26654-2-matthew.auld@intel.com
(cherry picked from commit bd7c0cb695e87c0e43247be8196b4919edbe0e85)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The metadata saved in the ADS is read by GuC when it's initialized.
Saving the addresses to the LRCs when they are populated is too late as
GuC will keep using the old ones.
This was causing GuC to use the RCS LRC for any engine class. It's not a
big problem on a Linux-only scenario since the they are used by GuC only
on media engines when the watchdog is triggered. However, in a
virtualization scenario with Windows as the VF, it causes the wrong LRCs
to be loaded as the watchdog is used for all engines.
Fix it by letting guc_golden_lrc_init() initialize the metadata, like
other *_init() functions, and later guc_golden_lrc_populate() to copy
the LRCs to the right places. The former is called before the second GuC
load, while the latter is called after LRCs have been recorded.
Cc: Chee Yin Wong <chee.yin.wong@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: <stable@vger.kernel.org> # v6.11+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Chee Yin Wong <chee.yin.wong@intel.com>
Link: https://lore.kernel.org/r/20250409-fix-guc-ads-v1-1-494135f7a5d0@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit c31a0b6402d15b530514eee9925adfcb8cfbb1c9)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Revert a reset patch that broke VFIO passthrough because devices
ended up with no available reset mechanisms (Alex Williamson)
* tag 'pci-v6.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
Revert "PCI: Avoid reset when disabled via sysfs"
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
dma-buf:
- Correctly decrement refcounter on errors
gem:
- Fix test for imported buffers
ivpu:
- Fix debugging
- Fixes to frequency
- Support firmware API 3.28.3
- Flush jobs upon reset
mgag200:
- Set vblank start to correct values
v3d:
- Fix Indirect Dispatch
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250417084043.GA365738@linux.fritz.box
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
drm/i915 fixes for v6.15-rc3:
- Fix DP DSC configurations that require 3 DSC engines per pipe
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/87fri7p8tp.fsf@intel.com
|
|
Pull vfio fix from Alex Williamson:
- Include devices where the platform indicates PCI INTx is not routed
by setting pdev->irq to zero in the expanded virtualization of the
PCI pin register. This provides consistency in the INFO and SET_IRQS
ioctls (Alex Williamson)
* tag 'vfio-v6.15-rc3' of https://github.com/awilliam/linux-vfio:
vfio/pci: Virtualize zero INTx PIN if no pdev->irq
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few more device specific fixes plus one trivial quirk.
There's a couple of patches for Tegra which avoid some fairly
spectacular log spam if the hardware breaks in ways which were
actually seen in production, plus a fix for the i.MX driver to
propagate errors properly when setting up the hardware.
We also have a trivial patch marking the sun4i driver as being
compatible with GPIO chip selects"
* tag 'spi-fix-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-imx: Add check for spi_imx_setupxfer()
spi: tegra210-quad: add rate limiting and simplify timeout error message
spi: tegra210-quad: use WARN_ON_ONCE instead of WARN_ON for timeouts
spi: sun4i: add support for GPIO chip select lines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, CAN and Netfilter.
Current release - regressions:
- two fixes for the netdev per-instance locking
- batman-adv: fix double-hold of meshif when getting enabled
Current release - new code bugs:
- Bluetooth: increment TX timestamping tskey always for stream
sockets
- wifi: static analysis and build fixes for the new Intel sub-driver
Previous releases - regressions:
- net: fib_rules: fix iif / oif matching on L3 master (VRF) device
- ipv6: add exception routes to GC list in rt6_insert_exception()
- netfilter: conntrack: fix erroneous removal of offload bit
- Bluetooth:
- fix sending MGMT_EV_DEVICE_FOUND for invalid address
- l2cap: process valid commands in too long frame
- btnxpuart: Revert baudrate change in nxp_shutdown
Previous releases - always broken:
- ethtool: fix memory corruption during SFP FW flashing
- eth:
- hibmcge: fixes for link and MTU handling, pause frames etc
- igc: fixes for PTM (PCIe timestamping)
- dsa: b53: enable BPDU reception for management port
Misc:
- fixes for Netlink protocol schemas"
* tag 'net-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
net: ethernet: mtk_eth_soc: revise QDMA packet scheduler settings
net: ethernet: mtk_eth_soc: correct the max weight of the queue limit for 100Mbps
net: ethernet: mtk_eth_soc: reapply mdc divider on reset
net: ti: icss-iep: Fix possible NULL pointer dereference for perout request
net: ti: icssg-prueth: Fix possible NULL pointer dereference inside emac_xmit_xdp_frame()
net: ti: icssg-prueth: Fix kernel warning while bringing down network interface
netfilter: conntrack: fix erronous removal of offload bit
net: don't try to ops lock uninitialized devs
ptp: ocp: fix start time alignment in ptp_ocp_signal_set
net: dsa: avoid refcount warnings when ds->ops->tag_8021q_vlan_del() fails
net: dsa: free routing table on probe failure
net: dsa: clean up FDB, MDB, VLAN entries on unbind
net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupported
net: dsa: mv88e6xxx: avoid unregistering devlink regions which were never registered
net: txgbe: fix memory leak in txgbe_probe() error path
net: bridge: switchdev: do not notify new brentries as changed
net: b53: enable BPDU reception for management port
netlink: specs: rt-neigh: prefix struct nfmsg members with ndm
netlink: specs: rt-link: adjust mctp attribute naming
netlink: specs: rtnetlink: attribute naming corrections
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull fwctl fixes from Jason Gunthorpe:
"Three small changes from further build testing:
- Don't rely on the userspace uuid.h for the uapi header
- Fix sparse warnings in pds
- Typo in log message"
* tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
fwctl: Fix repeated device word in log message
pds_fwctl: Fix type and endian complaints
fwctl/cxl: Fix uuid_t usage in uapi
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All are device-specific like quirks, new
IDs, and other safe (or rather boring) changes"
* tag 'sound-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
firmware: cs_dsp: test_bin_error: Fix uninitialized data used as fw version
ASoC: codecs: Add of_match_table for aw888081 driver
ASoC: fsl: fsl_qmc_audio: Reset audio data pointers on TRIGGER_START event
mailmap: Add entry for Srinivas Kandagatla
MAINTAINERS: use kernel.org alias
ASoC: cs42l43: Reset clamp override on jack removal
ALSA: hda/realtek - Fixed ASUS platform headset Mic issue
ALSA: hda/cirrus_scodec_test: Don't select dependencies
ALSA: azt2320: Replace deprecated strcpy() with strscpy()
ASoC: hdmi-codec: use RTD ID instead of DAI ID for ELD entry
ASoC: Intel: avs: Constrain path based on BE capabilities
ALSA: hda/tas2781: Remove unnecessary NULL check before release_firmware()
ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe()
ASoC: fsl_asrc_dma: get codec or cpu dai from backend
ASoC: qcom: Fix sc7280 lpass potential buffer overflow
ASoC: dwc: always enable/disable i2s irqs
ASoC: Intel: sof_sdw: Add quirk for Asus Zenbook S16
ASoC: codecs:lpass-wsa-macro: Fix logic of enabling vi channels
ASoC: codecs:lpass-wsa-macro: Fix vi feedback rate
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
"Fixes:
- amd/pmf: Fix STT limits
- asus-laptop: Fix an uninitialized variable
- intel_pmc_ipc: Allow building without ACPI
- mlxbf-bootctl: Use sysfs_emit_at() in secure_boot_fuse_state_show()
- msi-wmi-platform: Add locking to workaround ACPI firmware bug
New HW support:
- alienware-wmi-wmax:
- Extended thermal control support to:
- Alienware Area-51m R2
- Alienware m16 R1
- Alienware m16 R2
- Dell G16 7630
- Dell G5 5505 SE
- G-Mode support to Alienware m16 R1
- x86-android-tablets: Add Vexia Edu Atla 10 tablet 5V data"
* tag 'platform-drivers-x86-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: msi-wmi-platform: Workaround a ACPI firmware bug
platform/x86: msi-wmi-platform: Rename "data" variable
platform/x86: alienware-wmi-wmax: Extend support to more laptops
platform/x86: alienware-wmi-wmax: Add G-Mode support to Alienware m16 R1
platform/x86: amd: pmf: Fix STT limits
mlxbf-bootctl: use sysfs_emit_at() in secure_boot_fuse_state_show()
platform/x86: x86-android-tablets: Add Vexia Edu Atla 10 tablet 5V data
platform/x86: x86-android-tablets: Add "9v" to Vexia EDU ATLA 10 tablet symbols
asus-laptop: Fix an uninitialized variable
platform/x86: intel_pmc_ipc: add option to build without ACPI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Small drivers fixes, except for ufs which has two large updates, one
for exposing the device level feature, which is a new addition to the
device spec and the other reworking the exynos driver to fix coherence
issues on some android phones"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: megaraid_sas: Driver version update to 07.734.00.00-rc1
scsi: megaraid_sas: Block zero-length ATA VPD inquiry
scsi: scsi_transport_srp: Replace min/max nesting with clamp()
scsi: ufs: core: Add device level exception support
scsi: ufs: core: Rename ufshcd_wb_presrv_usrspc_keep_vcc_on()
scsi: smartpqi: Use is_kdump_kernel() to check for kdump
scsi: pm80xx: Set phy_attached to zero when device is gone
scsi: ufs: exynos: gs101: Put UFS device in reset on .suspend()
scsi: ufs: exynos: Move phy calls to .exit() callback
scsi: ufs: exynos: Enable PRDT pre-fetching with UFSHCD_CAP_CRYPTO
scsi: ufs: exynos: Ensure consistent phy reference counts
scsi: ufs: exynos: Disable iocc if dma-coherent property isn't set
scsi: ufs: exynos: Move UFS shareability value to drvdata
scsi: ufs: exynos: Ensure pre_link() executes before exynos_ufs_phy_init()
scsi: iscsi: Fix missing scsi_host_put() in error path
scsi: ufs: core: Fix a race condition related to device commands
scsi: hisi_sas: Fix I/O errors caused by hardware port ID changes
scsi: hisi_sas: Enable force phy when SATA disk directly connected
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Damien Le Moal:
- Fix how sense data from the sense data for successfull NCQ commands
log page is used to fully initialize the result_tf of a completed
command, so that the sense data returned to the scsi layer is fully
initialized with all the device provided information (from Niklas)
* tag 'ata-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-sata: Save all fields from sense data descriptor
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate content for 6.15 (4/15/25) from Mario Limonciello:
"Add a fix for X3D processors where depending upon what BIOS was
set initially rankings might be set improperly.
Add a fix for changing min/max limits while on the performance
governor."
* tag 'amd-pstate-v6.15-2025-04-15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Enable ITMT support after initializing core rankings
cpufreq/amd-pstate: Fix min_limit perf and freq updation for performance governor
|
|
Since cpufreq_driver_resolve_freq() can run in parallel with
cpufreq_set_policy() and there is no synchronization between them,
the former may access policy->min and policy->max while the latter
is updating them and it may see intermediate values of them due
to the way the update is carried out. Also the compiler is free
to apply any optimizations it wants both to the stores in
cpufreq_set_policy() and to the loads in cpufreq_driver_resolve_freq()
which may result in additional inconsistencies.
To address this, use WRITE_ONCE() when updating policy->min and
policy->max in cpufreq_set_policy() and use READ_ONCE() for reading
them in cpufreq_driver_resolve_freq(). Moreover, rearrange the update
in cpufreq_set_policy() to avoid storing intermediate values in
policy->min and policy->max with the help of the observation that
their new values are expected to be properly ordered upfront.
Also modify cpufreq_driver_resolve_freq() to take the possible reverse
ordering of policy->min and policy->max, which may happen depending on
the ordering of operations when this function and cpufreq_set_policy()
run concurrently, into account by always honoring the max when it
turns out to be less than the min (in case it comes from thermal
throttling or similar).
Fixes: 151717690694 ("cpufreq: Make policy min/max hard requirements")
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/5907080.DvuYhMxLoT@rjwysocki.net
|
|
The QDMA packet scheduler suffers from a performance issue.
Fix this by picking up changes from MediaTek's SDK which change to use
Token Bucket instead of Leaky Bucket and fix the SPEED_1000 configuration.
Fixes: 160d3a9b1929 ("net: ethernet: mtk_eth_soc: introduce MTK_NETSYS_V2 support")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/18040f60f9e2f5855036b75b28c4332a2d2ebdd8.1744764277.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
100Mbps
Without this patch, the maximum weight of the queue limit will be
incorrect when linked at 100Mbps due to an apparent typo.
Fixes: f63959c7eec31 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/74111ba0bdb13743313999ed467ce564e8189006.1744764277.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the current method, the MDC divider was reset to the default setting
of 2.5MHz after the NETSYS SER. Therefore, we need to reapply the MDC
divider configuration function in mtk_hw_init() after reset.
Fixes: c0a440031d431 ("net: ethernet: mtk_eth_soc: set MDIO bus clock frequency")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/8ab7381447e6cdcb317d5b5a6ddd90a1734efcb0.1744764277.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit <5518f239aff1> ("iommu/vt-d: Move scalable mode ATS enablement to
probe path") changed the PCI ATS enablement logic to run earlier,
specifically before the default domain attachment.
On some client platforms, this change resulted in boot failures, causing
the kernel to panic with the following message and call trace:
Kernel panic - not syncing: DMAR hardware is malfunctioning
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc3+ #175
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xb0
dump_stack+0x10/0x16
panic+0x10a/0x2b7
iommu_enable_translation.cold+0xc/0xc
intel_iommu_init+0xe39/0xec0
? trace_hardirqs_on+0x1e/0xd0
? __pfx_pci_iommu_init+0x10/0x10
pci_iommu_init+0xd/0x40
do_one_initcall+0x5b/0x390
kernel_init_freeable+0x26d/0x2b0
? __pfx_kernel_init+0x10/0x10
kernel_init+0x15/0x120
ret_from_fork+0x35/0x60
? __pfx_kernel_init+0x10/0x10
ret_from_fork_asm+0x1a/0x30
RIP: 1f0f:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0000:0000000000000000 EFLAGS: 841f0f2e66 ORIG_RAX:
1f0f2e6600000000
RAX: 0000000000000000 RBX: 1f0f2e6600000000 RCX:
2e66000000000084
RDX: 0000000000841f0f RSI: 000000841f0f2e66 RDI:
00841f0f2e660000
RBP: 00841f0f2e660000 R08: 00841f0f2e660000 R09:
000000841f0f2e66
R10: 0000000000841f0f R11: 2e66000000000084 R12:
000000841f0f2e66
R13: 0000000000841f0f R14: 2e66000000000084 R15:
1f0f2e6600000000
</TASK>
---[ end Kernel panic - not syncing: DMAR hardware is malfunctioning ]---
Fix this by reverting the timing change for ATS enablement introduced by
the offending commit and restoring the previous behavior.
Fixes: 5518f239aff1 ("iommu/vt-d: Move scalable mode ATS enablement to probe path")
Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Closes: https://lore.kernel.org/linux-iommu/01b9c72f-460d-4f77-b696-54c6825babc9@linux.intel.com/
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250416073608.1799578-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
There is a string parsing logic error which can lead to an overflow of hid
or uid buffers. Comparing ACPIID_LEN against a total string length doesn't
take into account the lengths of individual hid and uid buffers so the
check is insufficient in some cases. For example if the length of hid
string is 4 and the length of the uid string is 260, the length of str
will be equal to ACPIID_LEN + 1 but uid string will overflow uid buffer
which size is 256.
The same applies to the hid string with length 13 and uid string with
length 250.
Check the length of hid and uid strings separately to prevent
buffer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: ca3bf5d47cec ("iommu/amd: Introduces ivrs_acpihid kernel parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Paklov <Pavel.Paklov@cyberprotect.ru>
Link: https://lore.kernel.org/r/20250325092259.392844-1-Pavel.Paklov@cyberprotect.ru
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.15
- fix scan failure for non-ANA multipath controllers (Hannes Reinecke)
- fix multipath sysfs links creation for some cases (Hannes Reinecke)
- PCIe endpoint fixes (Damien Le Moal)
- use NULL instead of 0 in the auth code (Damien Le Moal)"
* tag 'nvme-6.15-2025-04-17' of git://git.infradead.org/nvme:
nvmet: pci-epf: cleanup link state management
nvmet: pci-epf: clear CC and CSTS when disabling the controller
nvmet: pci-epf: always fully initialize completion entries
nvmet: auth: use NULL to clear a pointer in nvmet_auth_sq_free()
nvme-multipath: sysfs links may not be created for devices
nvme: fixup scan failure for non-ANA multipath controllers
|
|
We've never supported StreamID aliasing between devices, and as such
they will never have had functioning DMA, but this is not fatal to the
SMMU itself. Although aliasing between hard-wired platform device
StreamIDs would tend to raise questions about the whole system, in
practice it's far more likely to occur relatively innocently due to
legacy PCI bridges, where the underlying StreamID mappings are still
perfectly reasonable.
As such, return a more benign -ENODEV when failing probe for such an
unsupported device (and log a more obvious error message), so that it
doesn't break the entire SMMU probe now that bus_iommu_probe() runs in
the right order and can propagate that error back. The end result is
still that the device doesn't get an IOMMU group and probably won't
work, same as before.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/39d54e49c8476efc4653e352150d44b185d6d50f.1744380554.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
ASPEED VGA card has two built-in devices:
0008:06:00.0 PCI bridge: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge (rev 06)
0008:07:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 52)
Its toplogy looks like this:
+-[0008:00]---00.0-[01-09]--+-00.0-[02-09]--+-00.0-[03]----00.0 Sandisk Corp Device 5017
| +-01.0-[04]--
| +-02.0-[05]----00.0 NVIDIA Corporation Device
| +-03.0-[06-07]----00.0-[07]----00.0 ASPEED Technology, Inc. ASPEED Graphics Family
| +-04.0-[08]----00.0 Renesas Technology Corp. uPD720201 USB 3.0 Host Controller
| \-05.0-[09]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
\-00.1 PMC-Sierra Inc. Device 4028
The IORT logic populaties two identical IDs into the fwspec->ids array via
DMA aliasing in iort_pci_iommu_init() called by pci_for_each_dma_alias().
Though the SMMU driver had been able to handle this situation since commit
563b5cbe334e ("iommu/arm-smmu-v3: Cope with duplicated Stream IDs"), that
got broken by the later commit cdf315f907d4 ("iommu/arm-smmu-v3: Maintain
a SID->device structure"), which ended up with allocating separate streams
with the same stuffing.
On a kernel prior to v6.15-rc1, there has been an overlooked warning:
pci 0008:07:00.0: vgaarb: setting as boot VGA device
pci 0008:07:00.0: vgaarb: bridge control possible
pci 0008:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pcieport 0008:06:00.0: Adding to iommu group 14
ast 0008:07:00.0: stream 67328 already in tree <===== WARNING
ast 0008:07:00.0: enabling device (0002 -> 0003)
ast 0008:07:00.0: Using default configuration
ast 0008:07:00.0: AST 2600 detected
ast 0008:07:00.0: [drm] Using analog VGA
ast 0008:07:00.0: [drm] dram MCLK=396 Mhz type=1 bus_width=16
[drm] Initialized ast 0.1.0 for 0008:07:00.0 on minor 0
ast 0008:07:00.0: [drm] fb0: astdrmfb frame buffer device
With v6.15-rc, since the commit bcb81ac6ae3c ("iommu: Get DT/ACPI parsing
into the proper probe path"), the error returned with the warning is moved
to the SMMU device probe flow:
arm_smmu_probe_device+0x15c/0x4c0
__iommu_probe_device+0x150/0x4f8
probe_iommu_group+0x44/0x80
bus_for_each_dev+0x7c/0x100
bus_iommu_probe+0x48/0x1a8
iommu_device_register+0xb8/0x178
arm_smmu_device_probe+0x1350/0x1db0
which then fails the entire SMMU driver probe:
pci 0008:06:00.0: Adding to iommu group 21
pci 0008:07:00.0: stream 67328 already in tree
arm-smmu-v3 arm-smmu-v3.9.auto: Failed to register iommu
arm-smmu-v3 arm-smmu-v3.9.auto: probe with driver arm-smmu-v3 failed with error -22
Since SMMU driver had been already expecting a potential duplicated Stream
ID in arm_smmu_install_ste_for_dev(), change the arm_smmu_insert_master()
routine to ignore a duplicated ID from the fwspec->sids array as well.
Note: this has been failing the iommu_device_probe() since 2021, although a
recent iommu commit in v6.15-rc1 that moves iommu_device_probe() started to
fail the SMMU driver probe. Since nobody has cared about DMA Alias support,
leave that as it was but fix the fundamental iommu_device_probe() breakage.
Fixes: cdf315f907d4 ("iommu/arm-smmu-v3: Maintain a SID->device structure")
Cc: stable@vger.kernel.org
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20250415185620.504299-1-nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
UBSan caught a bug with IOMMU SVA domains, where the reported exponent
value in __arm_smmu_tlb_inv_range() was >= 64.
__arm_smmu_tlb_inv_range() uses the domain's pgsize_bitmap to compute
the number of pages to invalidate and the invalidation range. Currently
arm_smmu_sva_domain_alloc() does not setup the iommu domain's
pgsize_bitmap. This leads to __ffs() on the value returning 64 and that
leads to undefined behaviour w.r.t. shift operations
Fix this by initializing the iommu_domain's pgsize_bitmap to PAGE_SIZE.
Effectively the code needs to use the smallest page size for
invalidation
Cc: stable@vger.kernel.org
Fixes: eb6c97647be2 ("iommu/arm-smmu-v3: Avoid constructing invalid range commands")
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250412002354.3071449-1-balbirs@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Commit 67e4fe398513 ("iommu/arm-smmu-v3: Use S2FWB for NESTED domains")
introduced S2FWB usage but omitted the corresponding feature detection.
As a result, vIOMMU allocation fails on FVP in arm_vsmmu_alloc(), due to
the following check:
if (!arm_smmu_master_canwbs(master) &&
!(smmu->features & ARM_SMMU_FEAT_S2FWB))
return ERR_PTR(-EOPNOTSUPP);
This patch adds the missing detection logic to prevent allocation
failure when S2FWB is supported.
Fixes: 67e4fe398513 ("iommu/arm-smmu-v3: Use S2FWB for NESTED domains")
Signed-off-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Link: https://lore.kernel.org/r/20250408033351.1012411-1-aneesh.kumar@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add check for the return value of spi_imx_setupxfer().
spi_imx->rx and spi_imx->tx function pointer can be NULL when
spi_imx_setupxfer() return error, and make NULL pointer dereference.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
0x0
spi_imx_pio_transfer+0x50/0xd8
spi_imx_transfer_one+0x18c/0x858
spi_transfer_one_message+0x43c/0x790
__spi_pump_transfer_message+0x238/0x5d4
__spi_sync+0x2b0/0x454
spi_write_then_read+0x11c/0x200
Signed-off-by: Tamura Dai <kirinode0@gmail.com>
Reviewed-by: Carlos Song <carlos.song@nxp.com>
Link: https://patch.msgid.link/20250417011700.14436-1-kirinode0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
error handling
wmax_thermal_information() may also return -ENOMSG, which would leave
`id` uninitialized in thermal_profile_probe.
Reorder and modify logic to catch all errors.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/Z_-KVqNbD9ygvE2X@stanley.mountain
Fixes: 27e9e6339896 ("platform/x86: alienware-wmi: Refactor thermal control methods")
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250416-smatch-fix-v1-1-35491b462d8f@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
In certain situations, the sysfs for uncore may not be present when all
CPUs in a package are offlined and then brought back online after boot.
This issue can occur if there is an error in adding the sysfs entry due
to a memory allocation failure. Retrying to bring the CPUs online will
not resolve the issue, as the uncore_cpu_mask is already set for the
package before the failure condition occurs.
This issue does not occur if the failure happens during module
initialization, as the module will fail to load in the event of any
error.
To address this, ensure that the uncore_cpu_mask is not set until the
successful return of uncore_freq_add_entry().
Fixes: dbce412a7733 ("platform/x86/intel-uncore-freq: Split common and enumeration part")
Signed-off-by: Shouye Liu <shouyeliu@tencent.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250417032321.75580-1-shouyeliu@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
When an APU exits HW sleep with no active wake sources the Linux kernel will
rapidly assert that the APU can enter back into HW sleep. This happens in a
few ms. Contrasting this to Windows, Windows can take 10s of seconds to
enter back into the resiliency phase for Modern Standby.
For some situations this can be problematic because it can cause leakage
from VDDCR_SOC to VDD_MISC and force VDD_MISC outside of the electrical
design guide specifications. On some designs this will trip the over
voltage protection feature (OVP) of the voltage regulator module, but it
could cause APU damage as well.
To prevent this risk, add an explicit sleep call so that future attempts
to enter into HW sleep will have enough time to settle. This will occur
while the screen is dark and only on cases that the APU should enter HW
sleep again, so it shouldn't be noticeable to any user.
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250414162446.3853194-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- l2cap: Process valid commands in too long frame
- vhci: Avoid needless snprintf() calls
* tag 'for-net-2025-04-16' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: vhci: Avoid needless snprintf() calls
Bluetooth: l2cap: Process valid commands in too long frame
====================
Link: https://patch.msgid.link/20250416210126.2034212-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ICSS IEP driver tracks perout and pps enable state with flags.
Currently when disabling pps and perout signals during icss_iep_exit(),
results in NULL pointer dereference for perout.
To fix the null pointer dereference issue, the icss_iep_perout_enable_hw
function can be modified to directly clear the IEP CMP registers when
disabling PPS or PEROUT, without referencing the ptp_perout_request
structure, as its contents are irrelevant in this case.
Fixes: 9b115361248d ("net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_init")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/7b1c7c36-363a-4085-b26c-4f210bee1df6@stanley.mountain/
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250415090543.717991-4-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
emac_xmit_xdp_frame()
There is an error check inside emac_xmit_xdp_frame() function which
is called when the driver wants to transmit XDP frame, to check if
the allocated tx descriptor is NULL, if true to exit and return
ICSSG_XDP_CONSUMED implying failure in transmission.
In this case trying to free a descriptor which is NULL will result
in kernel crash due to NULL pointer dereference. Fix this error handling
and increase netdev tx_dropped stats in the caller of this function
if the function returns ICSSG_XDP_CONSUMED.
Fixes: 62aa3246f462 ("net: ti: icssg-prueth: Add XDP support")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/70d8dd76-0c76-42fc-8611-9884937c82f5@stanley.mountain/
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250415090543.717991-3-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
During network interface initialization, the NIC driver needs to register
its Rx queue with the XDP, to ensure the incoming XDP buffer carries a
pointer reference to this info and is stored inside xdp_rxq_info.
While this struct isn't tied to XDP prog, if there are any changes in
Rx queue, the NIC driver needs to stop the Rx queue by unregistering
with XDP before purging and reallocating memory. Drop page_pool destroy
during Rx channel reset as this is already handled by XDP during
xdp_rxq_info_unreg (Rx queue unregister), failing to do will cause the
following warning:
warning logs: https://gist.github.com/MeghanaMalladiTI/eb627e5dc8de24e42d7d46572c13e576
Fixes: 46eeb90f03e0 ("net: ti: icssg-prueth: Use page_pool API for RX buffer allocation")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250415090543.717991-2-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 3f66425a4fc8 ("cpufreq: Enable COMPILE_TEST on Arm drivers")
enabled compile testing of most Arm CPUFreq drivers but left the
existing default values unchanged so that many drivers are enabled by
default whenever COMPILE_TEST is selected.
This specifically results in the S3C64XX CPUFreq driver being enabled
and initialised during boot of non-S3C64XX platforms with the following
error logged:
cpufreq: Unable to obtain ARMCLK: -2
Commit d4f610a9bafd ("cpufreq: Do not enable by default during compile
testing") recently fixed most of the default values, but two entries
were missed and two could use a more specific default condition.
Fix the default values for drivers that can be compile tested and that
should be enabled by default when not compile testing.
Fixes: 3f66425a4fc8 ("cpufreq: Enable COMPILE_TEST on Arm drivers")
Cc: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Fix an off-by-one error when setting the vblanking start in
<VBLKSTR>. Commit d6460bd52c27 ("drm/mgag200: Add dedicated
variables for blanking fields") switched the value from
crtc_vdisplay to crtc_vblank_start, which DRM helpers copy
from the former. The commit missed to subtract one though.
Reported-by: Wakko Warner <wakko@animx.eu.org>
Closes: https://lore.kernel.org/dri-devel/CAMwc25rKPKooaSp85zDq2eh-9q4UPZD=RqSDBRp1fAagDnmRmA@mail.gmail.com/
Reported-by: Сергей <afmerlord@gmail.com>
Closes: https://lore.kernel.org/all/5b193b75-40b1-4342-a16a-ae9fc62f245a@gmail.com/
Closes: https://bbs.archlinux.org/viewtopic.php?id=303819
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: d6460bd52c27 ("drm/mgag200: Add dedicated variables for blanking fields")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.12+
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Wakko Warner <wakko@animx.eu.org>
Link: https://lore.kernel.org/r/20250416083847.51764-1-tzimmermann@suse.de
|
|
When EINT support for multiple addresses was introduced, the driver
library for the older generations (pinctrl-mtk-common) was not fixed
together. This resulted in invalid pointer accesses.
Fix up the filled in |struct mtk_eint| in pinctrl-mtk-common to match
what is now expected by the mtk-eint library.
Reported-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Tested-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Closes: https://lore.kernel.org/all/43nd5jxpk7b7fv46frqlfjnqfh5jlpqsemeoakqzd4wdi3df6y@w7ycd3k5ezvn/
Fixes: 3ef9f710efcb ("pinctrl: mediatek: Add EINT support for multiple addresses")
Cc: Hao Chang <ot_chhao.chang@mediatek.com>
Cc: Qingliang Li <qingliang.li@mediatek.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/20250415112339.2385454-1-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux into block-6.15
Pull MD fixes from Yu:
"- fix raid10 missing discard IO accounting (Yu Kuai)
- fix bitmap stats for bitmap file (Zheng Qixing)
- fix oops while reading all member disks failed during check/repair
(Meir Elisha)"
* tag 'md-6.15-20250416' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux:
md/raid1: Add check for missing source disk in process_checks()
md/md-bitmap: fix stats collection for external bitmaps
md/raid10: fix missing discard IO accounting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"31 hotfixes.
9 are cc:stable and the remainder address post-6.15 issues or aren't
considered necessary for -stable kernels.
22 patches are for MM, 9 are otherwise"
* tag 'mm-hotfixes-stable-2025-04-16-19-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
MAINTAINERS: update HUGETLB reviewers
mm: fix apply_to_existing_page_range()
selftests/mm: fix compiler -Wmaybe-uninitialized warning
alloc_tag: handle incomplete bulk allocations in vm_module_tags_populate
mailmap: add entry for Jean-Michel Hautbois
mm: (un)track_pfn_copy() fix + doc improvements
mm: fix filemap_get_folios_contig returning batches of identical folios
mm/hugetlb: add a line break at the end of the format string
selftests: mincore: fix tmpfs mincore test failure
mm/hugetlb: fix set_max_huge_pages() when there are surplus pages
mm/cma: report base address of single range correctly
mm: page_alloc: speed up fallbacks in rmqueue_bulk()
kunit: slub: add module description
mm/kasan: add module decription
ucs2_string: add module description
zlib: add module description
fpga: tests: add module descriptions
samples/livepatch: add module descriptions
ASN.1: add module description
mm/vma: add give_up_on_oom option on modify/merge, use in uffd release
...
|
|
Now ublk_abort_queue() is moved to ublk char device release handler,
meantime our request queue is "quiesced" because either ->canceling was
set from uring_cmd cancel function or all IOs are inflight and can't be
completed by ublk server, things becomes easy much:
- all uring_cmd are done, so we needn't to mark io as UBLK_IO_FLAG_ABORTED
for handling completion from uring_cmd
- ublk char device is closed, no one can hold IO request reference any more,
so we can simply complete this request or requeue it for ublk_nosrv_should_reissue_outstanding.
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-8-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove __ublk_quiesce_dev() and open code for updating device state as
QUIESCED.
We needn't to drain inflight requests in __ublk_quiesce_dev() any more,
because all inflight requests are aborted in ublk char device release
handler.
Also we needn't to set ->canceling in __ublk_quiesce_dev() any more
because it is done unconditionally now in ublk_ch_release().
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are currently two ways in which ublk server exit is detected by
ublk_drv:
1. uring_cmd cancellation. If there are any outstanding uring_cmds which
have not been completed to the ublk server when it exits, io_uring
calls the uring_cmd callback with a special cancellation flag as the
issuing task is exiting.
2. I/O timeout. This is needed in addition to the above to handle the
"saturated queue" case, when all I/Os for a given queue are in the
ublk server, and therefore there are no outstanding uring_cmds to
cancel when the ublk server exits.
There are a couple of issues with this approach:
- It is complex and inelegant to have two methods to detect the same
condition
- The second method detects ublk server exit only after a long delay
(~30s, the default timeout assigned by the block layer). This delays
the nosrv behavior from kicking in and potential subsequent recovery
of the device.
The second issue is brought to light with the new test_generic_06 which
will be added in following patch. It fails before this fix:
selftests: ublk: test_generic_06.sh
dev id is 0
dd: error writing '/dev/ublkb0': Input/output error
1+0 records in
0+0 records out
0 bytes copied, 30.0611 s, 0.0 kB/s
DEAD
dd took 31 seconds to exit (>= 5s tolerance)!
generic_06 : [FAIL]
Fix this by instead detecting and handling ublk server exit in the
character file release callback. This has several advantages:
- This one place can handle both saturated and unsaturated queues. Thus,
it replaces both preexisting methods of detecting ublk server exit.
- It runs quickly on ublk server exit - there is no 30s delay.
- It starts the process of removing task references in ublk_drv. This is
needed if we want to relax restrictions in the driver like letting
only one thread serve each queue
There is also the disadvantage that the character file release callback
can also be triggered by intentional close of the file, which is a
significant behavior change. Preexisting ublk servers (libublksrv) are
dependent on the ability to open/close the file multiple times. To
address this, only transition to a nosrv state if the file is released
while the ublk device is live. This allows for programs to open/close
the file multiple times during setup. It is still a behavior change if a
ublk server decides to close/reopen the file while the device is LIVE
(i.e. while it is responsible for serving I/O), but that would be highly
unusual. This behavior is in line with what is done by FUSE, which is
very similar to ublk in that a userspace daemon is providing services
traditionally provided by the kernel.
With this change in, the new test (and all other selftests, and all
ublksrv tests) pass:
selftests: ublk: test_generic_06.sh
dev id is 0
dd: error writing '/dev/ublkb0': Input/output error
1+0 records in
0+0 records out
0 bytes copied, 0.0376731 s, 0.0 kB/s
DEAD
generic_04 : [PASS]
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-6-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_ch_release() is called after ublk char device is closed, when all
uring_cmd are done, so it is perfect fine to move ublk device reset to
ublk_ch_release() from ublk_ctrl_start_recovery().
This way can avoid to grab the exiting daemon task_struct too long.
However, reset of the following ublk IO flags has to be moved until ublk
io_uring queues are ready:
- ubq->canceling
For requeuing IO in case of ublk_nosrv_dev_should_queue_io() before device
is recovered
- ubq->fail_io
For failing IO in case of UBLK_F_USER_RECOVERY_FAIL_IO before device is
recovered
- ublk_io->flags
For preventing using io->cmd
With this way, recovery is simplified a lot.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now ublk deals with ublk_nosrv_dev_should_queue_io() by keeping request
queue as quiesced. This way is fragile because queue quiesce crosses syscalls
or process contexts.
Switch to rely on ubq->canceling for dealing with
ublk_nosrv_dev_should_queue_io(), because it has been used for this purpose
during io_uring context exiting, and it can be reused before recovering too.
In ublk_queue_rq(), the request will be added to requeue list without
kicking off requeue in case of ubq->canceling, and finally requests added in
requeue list will be dispatched from either ublk_stop_dev() or
ublk_ctrl_end_recovery().
Meantime we have to move reset of ubq->canceling from ublk_ctrl_start_recovery()
to ublk_ctrl_end_recovery(), when IO handling can be recovered completely.
Then blk_mq_quiesce_queue() and blk_mq_unquiesce_queue() are always used
in same context.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250416035444.99569-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add ublk_force_abort_dev() for handling ublk_nosrv_dev_should_queue_io()
in ublk_stop_dev(). Then queue quiesce and unquiesce can be paired in
single function.
Meantime not change device state to QUIESCED any more, since the disk is
going to be removed soon.
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Most uring_cmds issued against ublk character devices are serialized
because each command affects only one queue, and there is an early check
which only allows a single task (the queue's ubq_daemon) to issue
uring_cmds against that queue. However, this mechanism does not work for
FETCH_REQs, since they are expected before ubq_daemon is set. Since
FETCH_REQs are only used at initialization and not in the fast path,
serialize them using the per-ublk-device mutex. This fixes a number of
data races that were previously possible if a badly behaved ublk server
decided to issue multiple FETCH_REQs against the same qid/tag
concurrently.
Reported-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In ptp_ocp_signal_set, the start time for periodic signals is not
aligned to the next period boundary. The current code rounds up the
start time and divides by the period but fails to multiply back by
the period, causing misaligned signal starts. Fix this by multiplying
the rounded-up value by the period to ensure the start time is the
closest next period.
Fixes: 4bd46bb037f8e ("ptp: ocp: Use DIV64_U64_ROUND_UP for rounding.")
Signed-off-by: Sagi Maimon <maimon.sagi@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250415053131.129413-1-maimon.sagi@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
