| Age | Commit message (Collapse) | Author |
|---|
|
* pm-cpufreq:
cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled
cpufreq: intel_pstate: Free memory only when turning off
cpufreq: intel_pstate: Add ->offline and ->online callbacks
cpufreq: intel_pstate: Tweak the EPP sysfs interface
cpufreq: intel_pstate: Update cached EPP in the active mode
cpufreq: intel_pstate: Refuse to turn off with HWP enabled
|
|
With the more strict (but greatly simplified) page reuse logic in
do_wp_page(), we can safely go back to the world where cow is not
enforced with writes.
This essentially reverts commit 17839856fd58 ("gup: document and work
around 'COW can break either way' issue"). There are some context
differences due to some changes later on around it:
2170ecfa7688 ("drm/i915: convert get_user_pages() --> pin_user_pages()", 2020-06-03)
376a34efa4ee ("mm/gup: refactor and de-duplicate gup_fast() code", 2020-06-03)
Some lines moved back and forth with those, but this revert patch should
have striped out and covered all the enforced cow bits anyways.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This commit fixes two issues:
1. The lockdep warning reported by Dong Aisheng <dongas86@gmail.com> [1].
It is a warning about a cycle (dpm_list_mtx --> kn->active#3 --> fw_lock)
that was introduced when device-link devices were added to expose device
link information in sysfs.
The patch that "introduced" this cycle can't be reverted because it's fixes
a real SRCU issue and also ensures that the device-link device is deleted
as soon as the device-link is deleted. This is important to avoid sysfs
name collisions if the device-link is create again immediately (this can
happen a lot with deferred probing).
2. Inconsistency in grabbing device_pm_lock() during device link deletion
Some device link deletion code paths grab device_pm_lock(), while others
don't. The device_pm_lock() is grabbed during device_link_add() because it
checks if the supplier is in the dpm_list and also reorders the dpm_list.
However, when a device link is deleted, it does not do either of those and
therefore device_pm_lock() is not necessary. Dropping the device_pm_lock()
in all the device link deletion paths removes the inconsistency in locking.
Thanks to Stephen Boyd for helping me understand the lockdep splat.
Fixes: 843e600b8a2b ("driver core: Fix sleeping in invalid context during device link deletion")
[1] - https://lore.kernel.org/lkml/CAA+hA=S4eAreb7vo69LAXSk2t5=DEKNxHaiY1wSpk4xTp9urLg@mail.gmail.com/
Reported-by: Dong Aisheng <dongas86@gmail.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20200901184445.1736658-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dev_err_probe() prepends the message with an error code. Let's make it
more readable by translating the code to a more recognisable symbol.
Fixes: a787e5400a1c ("driver core: add device probe log helper")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/ea3f973e4708919573026fdce52c264db147626d.1598630856.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
syzbot is reporting OOB read at vga_8planes_imageblit() [1], for
"cdat[y] >> 4" can become a negative value due to "const char *cdat".
[1] https://syzkaller.appspot.com/bug?id=0d7a0da1557dcd1989e00cb3692b26d4173b4132
Reported-by: syzbot <syzbot+69fbd3e01470f169c8c4@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/90b55ec3-d5b0-3307-9f7c-7ff5c5fd6ad3@i-love.sakura.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The USB device descriptor may get changed between two consecutive
enumerations on the same device for some reason, such as DFU or
malicius device.
In that case, we may access the changing descriptor if we don't take
the device lock here.
The issue is reported:
https://syzkaller.appspot.com/bug?id=901a0d9e6519ef8dc7acab25344bd287dd3c7be9
Cc: stable <stable@vger.kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Reported-by: syzbot+256e56ddde8b8957eabd@syzkaller.appspotmail.com
Fixes: 217a9081d8e6 ("USB: add all configs to the "descriptors" attribute")
Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com>
Link: https://lore.kernel.org/r/1599201467-11000-1-git-send-email-prime.zeng@hisilicon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 7a410953d1fb4dbe91ffcfdee9cbbf889d19b0d7.
This commit breaks USB on meson-gxl-s905x-libretech-cc. Reverting
the change solves the issue.
In fact, according to the reset framework code, consumers must not use
reset_control_(de)assert() on shared reset lines when reset_control_reset
has been used, and vice-versa.
Moreover, with this commit, usb is not guaranted to be reset since the
reset is likely to be initially deasserted.
Reverting the commit will bring back the suspend warning mentioned in the
commit description. Nevertheless, a warning is much less critical than
breaking dwc3-meson-g12a USB completely. We will address the warning
issue in another way as a 2nd step.
Fixes: 7a410953d1fb ("usb: dwc3: meson-g12a: fix shared reset control use")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reported-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20200827144810.26657-1-aouledameur@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Failing probe with -EPROBE_DEFER until all dependencies
listed in the _DEP (Operation Region Dependencies) object
have been met.
This will fix an issue where on some platforms UCSI ACPI
driver fails to probe because the address space handler for
the operation region that the UCSI ACPI interface uses has
not been loaded yet.
Fixes: 8243edf44152 ("usb: typec: ucsi: Add ACPI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200904110918.51546-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added missing code for un-register USB role switch in the remove and
error path.
Cc: Stable <stable@vger.kernel.org> # v5.8
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Fixes: 6701adfa9693b ("usb: typec: driver for Intel PMC mux control")
Signed-off-by: Madhusudanarao Amara <madhusudanarao.amara@intel.com>
Link: https://lore.kernel.org/r/20200825183811.7262-1-madhusudanarao.amara@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Userspace drivers that use a SetConfiguration() request to "lightweight"
reset an already configured usb device might cause data toggles to get out
of sync between the device and host, and the device becomes unusable.
The xHCI host requires endpoints to be dropped and added back to reset the
toggle. If USB core notices the new configuration is the same as the
current active configuration it will avoid these extra steps by calling
usb_reset_configuration() instead of usb_set_configuration().
A SetConfiguration() request will reset the device side data toggles.
Make sure usb_reset_configuration() function also drops and adds back the
endpoints to ensure data toggles are in sync.
To avoid code duplication split the current usb_disable_device() function
and reuse the endpoint specific part.
Cc: stable <stable@vger.kernel.org>
Tested-by: Martin Thierer <mthierer@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200901082528.12557-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
into char-misc-linus
Georgi writes:
interconnect fixes for v5.9
This contains two fixes:
- Fix the core to show correctly the bandwidth for disabled paths.
- Fix a driver to make sure small values are not truncated.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
* tag 'icc-5.9-rc4' of https://git.linaro.org/people/georgi.djakov/linux:
interconnect: qcom: Fix small BW votes being truncated to zero
interconnect: Show bandwidth for disabled paths as zero in debugfs
|
|
Not needed, already tracked by drm_crtc_state->active.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20200818072511.6745-3-kraxel@redhat.com
(cherry picked from commit 1174c8a0f33c1e5c442ac40381fe124248c08b3a)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-linus
Vinod writes:
phy: fixes for 5.9
*) platform_no_drv_owner.cocci and return value check qcom ipq806x-usb driver
*) correcting register programming for ipq8074 phy
*) disable PHY charger detect for omap-usb2-phy
* tag 'phy-fixes-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: omap-usb2-phy: disable PHY charger detect
phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init
phy: qualcomm: fix return value check in qcom_ipq806x_usb_phy_probe()
phy: qualcomm: fix platform_no_drv_owner.cocci warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-linus
Vinod writes:
soundwire fixes for v5.8
This contains two fixes to sdw core for dangling pointer and a typo for
INTSTAT register
* tag 'soundwire-5.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: fix double free of dangling pointer
soundwire: bus: fix typo in comment on INTSTAT registers
|
|
Beware that the address size for x86-32 may exceed unsigned long.
[ 0.368971] UBSAN: shift-out-of-bounds in drivers/iommu/intel/iommu.c:128:14
[ 0.369055] shift exponent 36 is too large for 32-bit type 'long unsigned int'
If we don't handle the wide addresses, the pages are mismapped and the
device read/writes go astray, detected as DMAR faults and leading to
device failure. The behaviour changed (from working to broken) in commit
fa954e683178 ("iommu/vt-d: Delegate the dma domain to upper layer"), but
the error looks older.
Fixes: fa954e683178 ("iommu/vt-d: Delegate the dma domain to upper layer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: James Sewart <jamessewart@arista.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: <stable@vger.kernel.org> # v5.3+
Link: https://lore.kernel.org/r/20200822160209.28512-1-chris@chris-wilson.co.uk
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
When memory encryption is active the device is likely not in a direct
mapped domain. Forbid using IOMMUv2 functionality for now until finer
grained checks for this have been implemented.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200824105415.21000-3-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Do not force devices supporting IOMMUv2 to be direct mapped when memory
encryption is active. This might cause them to be unusable because their
DMA mask does not include the encryption bit.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200824105415.21000-2-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
When using 128-bit interrupt-remapping table entry (IRTE) (a.k.a GA mode),
current driver disables interrupt remapping when it updates the IRTE
so that the upper and lower 64-bit values can be updated safely.
However, this creates a small window, where the interrupt could
arrive and result in IO_PAGE_FAULT (for interrupt) as shown below.
IOMMU Driver Device IRQ
============ ===========
irte.RemapEn=0
...
change IRTE IRQ from device ==> IO_PAGE_FAULT !!
...
irte.RemapEn=1
This scenario has been observed when changing irq affinity on a system
running I/O-intensive workload, in which the destination APIC ID
in the IRTE is updated.
Instead, use cmpxchg_double() to update the 128-bit IRTE at once without
disabling the interrupt remapping. However, this means several features,
which require GA (128-bit IRTE) support will also be affected if cmpxchg16b
is not supported (which is unprecedented for AMD processors w/ IOMMU).
Fixes: 880ac60e2538 ("iommu/amd: Introduce interrupt remapping ops structure")
Reported-by: Sean Osborne <sean.m.osborne@oracle.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Erik Rockstrom <erik.rockstrom@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20200903093822.52012-3-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Currently, the RemapEn (valid) bit is accidentally cleared when
programming IRTE w/ guestMode=0. It should be restored to
the prior state.
Fixes: b9fc6b56f478 ("iommu/amd: Implements irq_set_vcpu_affinity() hook to setup vapic mode for pass-through devices")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20200903093822.52012-2-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The user-after-free bug in thermal_zone_device_unregister() is reported by
KASAN. It happens because struct thermal_zone_device is released during of
device_unregister() invocation, and hence the "tz" variable shouldn't be
touched by thermal_notify_tz_delete(tz->id).
Fixes: 55cdf0a283b8 ("thermal: core: Add notifications call in the framework")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200817235854.26816-1-digetx@gmail.com
|
|
Currently driver is suppressing the negative temperature
readings from the vadc. Consumers of the thermal zones need
to read the negative temperature too. Don't suppress the
readings.
Fixes: c610afaa21d3c6e ("thermal: Add QPNP PMIC temperature alarm driver")
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/944856eb819081268fab783236a916257de120e4.1596040416.git.gurus@codeaurora.org
|
|
We can sometimes get bogus thermal shutdowns on omap4430 at least with
droid4 running idle with a battery charger connected:
thermal thermal_zone0: critical temperature reached (143 C), shutting down
Dumping out the register values shows we can occasionally get a 0x7f value
that is outside the TRM listed values in the ADC conversion table. And then
we get a normal value when reading again after that. Reading the register
multiple times does not seem help avoiding the bogus values as they stay
until the next sample is ready.
Looking at the TRM chapter "18.4.10.2.3 ADC Codes Versus Temperature", we
should have values from 13 to 107 listed with a total of 95 values. But
looking at the omap4430_adc_to_temp array, the values are off, and the
end values are missing. And it seems that the 4430 ADC table is similar
to omap3630 rather than omap4460.
Let's fix the issue by using values based on the omap3630 table and just
ignoring invalid values. Compared to the 4430 TRM, the omap3630 table has
the missing values added while the TRM table only shows every second
value.
Note that sometimes the ADC register values within the valid table can
also be way off for about 1 out of 10 values. But it seems that those
just show about 25 C too low values rather than too high values. So those
do not cause a bogus thermal shutdown.
Fixes: 1a31270e54d7 ("staging: omap-thermal: add OMAP4 data structures")
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200706183338.25622-1-tony@atomide.com
|
|
The dev_iommu_priv_set() must be called after probe_device(). This fixes
a NULL pointer deference bug when booting a system with kernel cmdline
"intel_iommu=on,igfx_off", where the dev_iommu_priv_set() is abused.
The following stacktrace was produced:
Command line: BOOT_IMAGE=/isolinux/bzImage console=tty1 intel_iommu=on,igfx_off
...
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000009aa9f000 end: 0x0000009aabefff
DMAR: RMRR base: 0x0000009d000000 end: 0x0000009f7fffff
DMAR: No ATSR found
BUG: kernel NULL pointer dereference, address: 0000000000000038
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.9.0-devel+ #2
Hardware name: LENOVO 20HGS0TW00/20HGS0TW00, BIOS N1WET46S (1.25s ) 03/30/2018
RIP: 0010:intel_iommu_init+0xed0/0x1136
Code: fe e9 61 02 00 00 bb f4 ff ff ff e9 57 02 00 00 48 63 d1 48 c1 e2 04 48
03 50 20 48 8b 12 48 85 d2 74 0b 48 8b 92 d0 02 00 00 48 89 7a 38 ff c1
e9 15 f5 ff ff 48 c7 c7 60 99 ac a7 49 c7 c7 a0
RSP: 0000:ffff96d180073dd0 EFLAGS: 00010282
RAX: ffff8c91037a7d20 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff
RBP: ffff96d180073e90 R08: 0000000000000001 R09: ffff8c91039fe3c0
R10: 0000000000000226 R11: 0000000000000226 R12: 000000000000000b
R13: ffff8c910367c650 R14: ffffffffa8426d60 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8c9107480000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000038 CR3: 00000004b100a001 CR4: 00000000003706e0
Call Trace:
? _raw_spin_unlock_irqrestore+0x1f/0x30
? call_rcu+0x10e/0x320
? trace_hardirqs_on+0x2c/0xd0
? rdinit_setup+0x2c/0x2c
? e820__memblock_setup+0x8b/0x8b
pci_iommu_init+0x16/0x3f
do_one_initcall+0x46/0x1e4
kernel_init_freeable+0x169/0x1b2
? rest_init+0x9f/0x9f
kernel_init+0xa/0x101
ret_from_fork+0x22/0x30
Modules linked in:
CR2: 0000000000000038
---[ end trace 3653722a6f936f18 ]---
Fixes: 01b9d4e21148c ("iommu/vt-d: Use dev_iommu_priv_get/set()")
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Reported-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Link: https://lore.kernel.org/linux-iommu/96717683-70be-7388-3d2f-61131070a96a@secunet.com/
Link: https://lore.kernel.org/r/20200903065132.16879-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The VT-d spec requires (10.4.4 Global Command Register, GCMD_REG General
Description) that:
If multiple control fields in this register need to be modified, software
must serialize the modifications through multiple writes to this register.
However, in irq_remapping.c, modifications of IRE and CFI are done in one
write. We need to do two separate writes with STS checking after each. It
also checks the status register before writing command register to avoid
unnecessary register write.
Fixes: af8d102f999a4 ("x86/intel/irq_remapping: Clean up x2apic opt-out security warning mess")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lore.kernel.org/r/20200828000615.8281-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Unlike we previously thought, the per-pixel alpha is just as broken on the
A20 as it is on the A10. Remove the quirk that says we can use it.
Fixes: dcf496a6a608 ("drm/sun4i: sun4i: Introduce a quirk for lowest plane alpha support")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728134810.883457-2-maxime@cerno.tech
|
|
Unlike what we previously thought, only the per-pixel alpha is broken on
the lowest plane and the per-plane alpha isn't. Remove the check on the
alpha property being set on the lowest plane to reject a mode.
Fixes: dcf496a6a608 ("drm/sun4i: sun4i: Introduce a quirk for lowest plane alpha support")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728134810.883457-1-maxime@cerno.tech
|
|
Function sun8i_vi_layer_get_csc_mode() is supposed to return CSC mode
but due to inproper return type (bool instead of u32) it returns just 0
or 1. Colors are wrong for YVU formats because of that.
Fixes: daab3d0e8e2b ("drm/sun4i: de2: csc_mode in de2 format struct is mostly redundant")
Reported-by: Roman Stratiienko <r.stratiienko@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Roman Stratiienko <r.stratiienko@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200901220305.6809-1-jernej.skrabec@siol.net
|
|
To be used in order to create foreign mappings. This is based on the
ZONE_DEVICE facility which is used by persistent memory devices in
order to create struct pages and kernel virtual mappings for the IOMEM
areas of such devices. Note that on kernels without support for
ZONE_DEVICE Xen will fallback to use ballooned pages in order to
create foreign mappings.
The newly added helpers use the same parameters as the existing
{alloc/free}_xenballooned_pages functions, which allows for in-place
replacement of the callers. Once a memory region has been added to be
used as scratch mapping space it will no longer be released, and pages
returned are kept in a linked list. This allows to have a buffer of
pages and prevents resorting to frequent additions and removals of
regions.
If enabled (because ZONE_DEVICE is supported) the usage of the new
functionality untangles Xen balloon and RAM hotplug from the usage of
unpopulated physical memory ranges to map foreign pages, which is the
correct thing to do in order to avoid mappings of foreign pages depend
on memory hotplug.
Note the driver is currently not enabled on Arm platforms because it
would interfere with the identity mapping required on some platforms.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200901083326.21264-4-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
This is in preparation for the logic behind MEMORY_DEVICE_DEVDAX also
being used by non DAX devices.
No functional change intended.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Link: https://lore.kernel.org/r/20200901083326.21264-3-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Pull networking fixes from David Miller:
1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi
Kivilinna.
2) Fix loss of RTT samples in rxrpc, from David Howells.
3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu.
4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka.
5) We disable BH for too lokng in sctp_get_port_local(), add a
cond_resched() here as well, from Xin Long.
6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu.
7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from
Yonghong Song.
8) Missing of_node_put() in mt7530 DSA driver, from Sumera
Priyadarsini.
9) Fix crash in bnxt_fw_reset_task(), from Michael Chan.
10) Fix geneve tunnel checksumming bug in hns3, from Yi Li.
11) Memory leak in rxkad_verify_response, from Dinghao Liu.
12) In tipc, don't use smp_processor_id() in preemptible context. From
Tuong Lien.
13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu.
14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter.
15) Fix ABI mismatch between driver and firmware in nfp, from Louis
Peens.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits)
net/smc: fix sock refcounting in case of termination
net/smc: reset sndbuf_desc if freed
net/smc: set rx_off for SMCR explicitly
net/smc: fix toleration of fake add_link messages
tg3: Fix soft lockup when tg3_reset_task() fails.
doc: net: dsa: Fix typo in config code sample
net: dp83867: Fix WoL SecureOn password
nfp: flower: fix ABI mismatch between driver and firmware
tipc: fix shutdown() of connectionless socket
ipv6: Fix sysctl max for fib_multipath_hash_policy
drivers/net/wan/hdlc: Change the default of hard_header_len to 0
net: gemini: Fix another missing clk_disable_unprepare() in probe
net: bcmgenet: fix mask check in bcmgenet_validate_flow()
amd-xgbe: Add support for new port mode
net: usb: dm9601: Add USB ID of Keenetic Plus DSL
vhost: fix typo in error message
net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init()
pktgen: fix error message with wrong function name
net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode
cxgb4: fix thermal zone device registration
...
|
|
A couple of minor fixes to the display changes that went in for 5.9.
The most important of which is a workaround for a HW bug that was
exposed by better push buffer space management, leading to
random(ish...) display engine hangs.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv5QDxyMihrxbPk+-sORnaYtjR6_dbM68gEhb2wxht_G1w@mail.gmail.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.9-rc4:
- Clang build warning fix
- HDCP fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87sgbz2pnx.fsf@intel.com
|
|
Small BW votes that translate to less than a single BCM unit are
currently truncated to zero. Ensure that non-zero BW requests always
result in at least a vote of 1 to BCM.
Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support")
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Link: https://lore.kernel.org/r/20200903192149.30385-2-mdtipton@codeaurora.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
|
|
If tg3_reset_task() fails, the device state is left in an inconsistent
state with IFF_RUNNING still set but NAPI state not enabled. A
subsequent operation, such as ifdown or AER error can cause it to
soft lock up when it tries to disable NAPI state.
Fix it by bringing down the device to !IFF_RUNNING state when
tg3_reset_task() fails. tg3_reset_task() running from workqueue
will now call tg3_close() when the reset fails. We need to
modify tg3_reset_task_cancel() slightly to avoid tg3_close()
calling cancel_work_sync() to cancel tg3_reset_task(). Otherwise
cancel_work_sync() will wait forever for tg3_reset_task() to
finish.
Reported-by: David Christensen <drc@linux.vnet.ibm.com>
Reported-by: Baptiste Covolato <baptiste@arista.com>
Fixes: db2199737990 ("tg3: Schedule at most one tg3_reset_task run")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The TVE200 will occasionally print a bunch of lost interrupts
and similar dmesg messages, sometimes during boot and sometimes
after disabling and coming back to enablement. This is probably
because the hardware is left in an unknown state by the boot
loader that displays a logo.
This can be fixed by bringing the controller into a known state
by resetting the controller while enabling it. We retry reset 5
times like the vendor driver does. We also put the controller
into reset before de-clocking it and clear all interrupts before
enabling the vblank IRQ.
This makes the video enable/disable/enable cycle rock solid
on the D-Link DIR-685. Tested extensively.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200820203144.271081-1-linus.walleij@linaro.org
|
|
Print the name of the client rather than the number. This
makes it easier to debug what block is causing the fault.
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Print the name of the client rather than the number. This
makes it easier to debug what block is causing the fault.
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Print the name of the client rather than the number. This
makes it easier to debug what block is causing the fault.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Print the name of the client rather than the number. This
makes it easier to debug what block is causing the fault.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. gfx_v10_0_soft_reset GRBM_STATUS__SPI_BUSY_MASK
2. gfx_v10_0_update_gfx_clock_gating AMD_CG_SUPPORT_GFX_CGLS
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It needs to load renoir_ta firmware because hdcp is enabled by default
for renoir now. This can avoid error:DTM TA is not initialized
Signed-off-by: Changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Calculate the correct value for max_entries or we might run after the
page_address array.
v2: Xinhui pointed out we don't need the shift
v3: use local copy of start and simplify some calculation
v4: fix the case that we map less VA range than BO size
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 1e691e244487 drm/amdgpu: stop allocating dummy GTT nodes
Reviewed-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The DRM device is a static member of
the amdgpu device structure and as such
always exists, so long as the PCI and
thus the amdgpu device exist.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable multi-ring ih1 and ih2 for Arcturus only.
For Navi10 family multi-ring has been disabled.
Apparently, having multi-ring enabled in Navi was causing
continus page fault interrupts.
Further investigation is needed to get to the root cause.
Related issue link:
https://gitlab.freedesktop.org/drm/amd/-/issues/1279
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove the private obj from the internal list before we free aconnector.
[ 56.925828] BUG: unable to handle page fault for address: ffff8f84a870a560
[ 56.933272] #PF: supervisor read access in kernel mode
[ 56.938801] #PF: error_code(0x0000) - not-present page
[ 56.944376] PGD 18e605067 P4D 18e605067 PUD 86a614067 PMD 86a4d0067 PTE 800ffff8578f5060
[ 56.953260] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 56.958815] CPU: 6 PID: 1407 Comm: bash Tainted: G O 5.9.0-rc2+ #46
[ 56.967092] Hardware name: System manufacturer System Product Name/PRIME Z390-A, BIOS 1401 11/26/2019
[ 56.977162] RIP: 0010:__list_del_entry_valid+0x31/0xa0
[ 56.982768] Code: 00 ad de 55 48 8b 17 4c 8b 47 08 48 89 e5 48 39 c2 74 27 48 b8 22 01 00 00 00 00 ad de 49 39 c0 74 2d 49 8b 30 48 39 fe 75 3d <48> 8b 52 08 48 39 f2 75 4c b8 01 00 00 00 5d c3 48 89 7
[ 57.003327] RSP: 0018:ffffb40c81687c90 EFLAGS: 00010246
[ 57.009048] RAX: dead000000000122 RBX: ffff8f84ea41f4f0 RCX: 0000000000000006
[ 57.016871] RDX: ffff8f84a870a558 RSI: ffff8f84ea41f4f0 RDI: ffff8f84ea41f4f0
[ 57.024672] RBP: ffffb40c81687c90 R08: ffff8f84ea400998 R09: 0000000000000001
[ 57.032490] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000006
[ 57.040287] R13: ffff8f84ea422a90 R14: ffff8f84b4129a20 R15: fffffffffffffff2
[ 57.048105] FS: 00007f550d885740(0000) GS:ffff8f8509600000(0000) knlGS:0000000000000000
[ 57.056979] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 57.063260] CR2: ffff8f84a870a560 CR3: 00000007e5144001 CR4: 00000000003706e0
[ 57.071053] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 57.078849] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 57.086684] Call Trace:
[ 57.089381] drm_atomic_private_obj_fini+0x29/0x82 [drm]
[ 57.095247] amdgpu_dm_fini+0x83/0x170 [amdgpu]
[ 57.100264] dm_hw_fini+0x23/0x30 [amdgpu]
[ 57.104814] amdgpu_device_fini+0x1df/0x4fe [amdgpu]
[ 57.110271] amdgpu_driver_unload_kms+0x43/0x70 [amdgpu]
[ 57.116136] amdgpu_pci_remove+0x3b/0x60 [amdgpu]
[ 57.121291] pci_device_remove+0x3e/0xb0
[ 57.125583] device_release_driver_internal+0xff/0x1d0
[ 57.131223] device_release_driver+0x12/0x20
[ 57.135903] pci_stop_bus_device+0x70/0xa0
[ 57.140401] pci_stop_and_remove_bus_device_locked+0x1b/0x30
[ 57.146571] remove_store+0x7b/0x90
[ 57.150429] dev_attr_store+0x17/0x30
[ 57.154441] sysfs_kf_write+0x4b/0x60
[ 57.158479] kernfs_fop_write+0xe8/0x1d0
[ 57.162788] vfs_write+0xf5/0x230
[ 57.166426] ksys_write+0x70/0xf0
[ 57.170087] __x64_sys_write+0x1a/0x20
[ 57.174219] do_syscall_64+0x38/0x90
[ 57.178145] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Acked-by: Feifei Xu <Feifei Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
drm_dev_alloc() alloc *dev* and set managed.final_kfree to dev to free
itself.
Now from commit 5cdd68498918("drm/amdgpu: Embed drm_device into
amdgpu_device (v3)") we alloc *adev* and ddev is just a member of it.
So drm_dev_release try to free a wrong pointer then.
Also driver's release trys to free adev, but drm_dev_release will
access dev after call drvier's release.
To fix it, remove driver's release and set managed.final_kfree to adev.
[ 36.269348] BUG: unable to handle page fault for address: ffffa0c279940028
[ 36.276841] #PF: supervisor read access in kernel mode
[ 36.282434] #PF: error_code(0x0000) - not-present page
[ 36.288053] PGD 676601067 P4D 676601067 PUD 86a414067 PMD 86a247067 PTE 800ffff8066bf060
[ 36.296868] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 36.302409] CPU: 4 PID: 1375 Comm: bash Tainted: G O 5.9.0-rc2+ #46
[ 36.310670] Hardware name: System manufacturer System Product Name/PRIME Z390-A, BIOS 1401 11/26/2019
[ 36.320725] RIP: 0010:drm_managed_release+0x25/0x110 [drm]
[ 36.326741] Code: 80 00 00 00 00 0f 1f 44 00 00 55 48 c7 c2 5a 9f 41 c0 be 00 02 00 00 48 89 e5 41 57 41 56 41 55 41 54 49 89 fc 53 48 83 ec 08 <48> 8b 7f 18 e8 c2 10 ff ff 4d 8b 74 24 20 49 8d 44 24 5
[ 36.347217] RSP: 0018:ffffb9424141fce0 EFLAGS: 00010282
[ 36.352931] RAX: 0000000000000006 RBX: ffffa0c279940010 RCX: 0000000000000006
[ 36.360718] RDX: ffffffffc0419f5a RSI: 0000000000000200 RDI: ffffa0c279940010
[ 36.368503] RBP: ffffb9424141fd10 R08: 0000000000000001 R09: 0000000000000001
[ 36.376304] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa0c279940010
[ 36.384070] R13: ffffffffc0e2a000 R14: ffffa0c26924e220 R15: fffffffffffffff2
[ 36.391845] FS: 00007fc4a277b740(0000) GS:ffffa0c288e00000(0000) knlGS:0000000000000000
[ 36.400669] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 36.406937] CR2: ffffa0c279940028 CR3: 0000000792304006 CR4: 00000000003706e0
[ 36.414732] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 36.422550] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 36.430354] Call Trace:
[ 36.433044] drm_dev_put.part.0+0x40/0x60 [drm]
[ 36.438017] drm_dev_put+0x13/0x20 [drm]
[ 36.442398] amdgpu_pci_remove+0x56/0x60 [amdgpu]
[ 36.447528] pci_device_remove+0x3e/0xb0
[ 36.451807] device_release_driver_internal+0xff/0x1d0
[ 36.457416] device_release_driver+0x12/0x20
[ 36.462094] pci_stop_bus_device+0x70/0xa0
[ 36.466588] pci_stop_and_remove_bus_device_locked+0x1b/0x30
[ 36.472786] remove_store+0x7b/0x90
[ 36.476614] dev_attr_store+0x17/0x30
[ 36.480646] sysfs_kf_write+0x4b/0x60
[ 36.484655] kernfs_fop_write+0xe8/0x1d0
[ 36.488952] vfs_write+0xf5/0x230
[ 36.492562] ksys_write+0x70/0xf0
[ 36.496206] __x64_sys_write+0x1a/0x20
[ 36.500292] do_syscall_64+0x38/0x90
[ 36.504219] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Acked-by: Alex Deucher <alexancer.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When GPU is in reset, its status isn't stable and ring buffer also need
be reset when resuming. Therefore driver should protect GPU recovery
thread from ring buffer accessed by other threads. Otherwise GPU will
randomly hang during recovery.
v2: correct indent
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Need to read back from registers for manual mode rather than
using the metrics table.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1164
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Will be used to fetch the fan speeds when manual fan mode is
set.
v2: squash in a Coverity fix from Colin Ian King
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No longer needed as we can calculate it based on
the fan's max rpm.
v2: minor code rework
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
