summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-06-28drm/exynos: Remove tracking log functionsYoungJun Cho
This patch removes tracking log functions which were used to debug in the early development stage and are not so important as were. So remove them for code clean up. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-06-28drm/exynos: hdmi: use drm_display_mode to check the supported modesRahul Sharma
This patch renames check_timing to check_mode and removes the unnecessary conversion of drm_display_mode to/from fb_videomode in the hdmi driver. v4: 1) Changed the commit message to add information related to renaming the callbacks to check_mode. 2) Changed debug message to print 1/0 for interlace mode. v3: 1) Replaced check_timing callbacks with check_mode. 2) Change the type of second parameter of check_mode callback from void pointer paramenter to struct drm_display_mode pointer. v2: 1) Removed convert_to_video_timing(). 2) Corrected DRM_DEBUG_KMS to print the resolution properly. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-06-28drm/exynos: fimd: Add support for S3C64xx SoCsTomasz Figa
The FIMD block present on S3C6400/S3C6410 SoCs is compatible with this driver, so it can be supported by it as well. This patch adds appropriate device IDs and driver data to enable this driver for S3C64xx SoCs. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-06-28drm/exynos: fimd: Add support for FIMD variants with clock selectionTomasz Figa
Some platforms that can be supported this driver has additional clock source selection bits in VIDCON0 register that allows to select which clock should be used to drive the pixel clock: bus clock or special clock. Since this driver assumes that special clock always drives the pixel clock, this patch sets the selection bitfield to use the special clock. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-06-28drm/exynos: fimd: Add support for FIMD versions without SHADOWCON registerTomasz Figa
Some platforms that can be supported with this driver have PRTCON register instead of SHADOWCON, which requires slightly different handling. This patch factors out all register shadow control code from the driver and adds a function to control register shadowing appropriately, depending on driver data. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-06-28drm/exynos: fimd: Hold pointer to driver data in context structTomasz Figa
This patch adds pointer to driver data to fimd_context structure, to remove the need to call drm_fimd_get_driver_data() each time access to driver data is necessary. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-06-28drm/exynos: do not use mode_set_base function directlyInki Dae
This patch adds exynos_drm_crtc_mode_set_commit function to update mode data and it makes page flip call this function instead of calling exynos_drm_crtc_mode_set_base function directly. exynos_drm_crtc_mode_set_base function is called by drm subsystem as a callback so we don't have to call this function directly. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-06-28drm/exynos: Remove redundant use of of_match_ptr macroSachin Kamat
'mixer_match_types' is always compiled in. Hence of_match_ptr is not necessary. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-06-28drm/exynos: remove ignoring return value warning in hdmiSeung-Woo Kim
The definition of regulator_bulk_enable is fixed with __must_check and this causes following build warning. warning: ignoring return value of 'regulator_bulk_enable', declared with attribute warn_unused_result This patch fixes to check return value of the function. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-06-28drm/exynos: fix WINDOWS_NR checking to vidi driverInki Dae
This patch just checks if win_data array range is valid or not correctly. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-06-28drm/exynos: fix tests for valid FIMD window numberKrzysztof Kozlowski
Valid values for FIMD windows are from 0 to WINDOWS_NR-1 inclusive (5 windows in total). The WINDOWS_NR is also a size of fimd_context.win_data array. However, early-return tests for wrong values of windows accepted a value of WINDOWS_NR which is out of bound for fimd_context.win_data. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-06-28drm/exynos: fix checks for valid mixer windowKrzysztof Kozlowski
Valid values for mixer window are from 0 to MIXER_WIN_NR-1 inclusive. Arrays in structures (e.g. mixer_context.win_data) have size of MIXER_WIN_NR so checks for wrong mixer window must be greater-equal. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Hyunhee Kim <hyunhee.kim@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-06-28Merge tag 'asoc-v3.11-2' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: More updates for v3.11 Some more fixes and enhancements, and also a bunch of refectoring for AC'97 support which enables more than one AC'97 controller driver to be built in.
2013-06-28Merge branch 'pm-assorted'Rafael J. Wysocki
* pm-assorted: PM / QoS: Add pm_qos and dev_pm_qos to events-power.txt PM / QoS: Add dev_pm_qos_request tracepoints PM / QoS: Add pm_qos_request tracepoints PM / QoS: Add pm_qos_update_target/flags tracepoints PM / QoS: Update Documentation/power/pm_qos_interface.txt PM / Sleep: Print last wakeup source on failed wakeup_count write PM / QoS: correct the valid range of pm_qos_class PM / wakeup: Adjust messaging for wake events during suspend PM / Runtime: Update .runtime_idle() callback documentation PM / Runtime: Rework the "runtime idle" helper routine PM / Hibernate: print physical addresses consistently with other parts of kernel
2013-06-28Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: (41 commits) cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: e_powersaver: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: ACPI: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: s3c2416: fix forgotten driver_data conversions cpufreq: make __cpufreq_notify_transition() static cpufreq: Fix minor formatting issues cpufreq: Fix governor start/stop race condition cpufreq: Simplify userspace governor cpufreq: X86_AMD_FREQ_SENSITIVITY: select CPU_FREQ_TABLE cpufreq: tegra: create CONFIG_ARM_TEGRA_CPUFREQ cpufreq: S3C2416/S3C64XX: select CPU_FREQ_TABLE ...
2013-06-28Merge branch 'pm-omap'Rafael J. Wysocki
* pm-omap: PM / AVS: SmartReflex: use devm_* API to initialize SmartReflex PM / AVS: SmartReflex: use omap_sr * for enable/disable interface PM / AVS: SmartReflex: use omap_sr * for minmax interfaces PM / AVS: SmartReflex: use omap_sr * for errgen interfaces PM / AVS: SmartReflex: fix driver name PM / AVS: SmartReflex: disable runtime PM on driver remove PM / AVS: SmartReflex: disable errgen before vpbound disable
2013-06-28Merge branch 'pm-devfreq'Rafael J. Wysocki
* pm-devfreq: MAINTAINERS: update mailing list for devfreq(DVFS). PM / devfreq: fix typo "CPU_EXYNOS4.12" twice PM / devfreq: fix missing unlock on error in exynos4_busfreq_pm_notifier_event() PM / devfreq: add comments and Documentation PM / devfreq: account suspend/resume for stats PM / devfreq: Add Exynos5-bus devfreq driver for Exynos5250 PM / devfreq: Move exynos4 devfreq driver into a new sub-directory
2013-06-28Merge branch 'pm-cpuidle'Rafael J. Wysocki
* pm-cpuidle: cpuidle: Fix ARCH_NEEDS_CPU_IDLE_COUPLED dependency warning cpuidle: Comment the driver's framework code cpuidle: simplify multiple driver support ARM: zynq: Add cpuidle support cpuidle: improve governor Kconfig options
2013-06-28Merge branch 'pnp'Rafael J. Wysocki
* pnp: pnp: restore automatic resolution of DMA conflicts
2013-06-28Merge branch 'freezer'Rafael J. Wysocki
* freezer: af_unix: use freezable blocking calls in read sigtimedwait: use freezable blocking call nanosleep: use freezable blocking call futex: use freezable blocking call select: use freezable blocking call epoll: use freezable blocking call binder: use freezable blocking calls freezer: add new freezable helpers using freezer_do_not_count() freezer: convert freezable helpers to static inline where possible freezer: convert freezable helpers to freezer_do_not_count() freezer: skip waking up tasks with PF_FREEZER_SKIP set freezer: shorten freezer sleep time using exponential backoff lockdep: check that no locks held at freeze time lockdep: remove task argument from debug_check_no_locks_held freezer: add unsafe versions of freezable helpers for CIFS freezer: add unsafe versions of freezable helpers for NFS
2013-06-28Merge branch 'acpi-assorted'Rafael J. Wysocki
* acpi-assorted: ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan ACPI: Add CMOS RTC Operation Region handler support ACPI: Remove unused flags in acpi_device_flags ACPI: Remove useless initializers ACPI / battery: Make sure all spaces are in correct places ACPI: add _STA evaluation at do_acpi_find_child() ACPI / EC: access user space with get_user()/put_user()
2013-06-28Merge branch 'acpi-lpss'Rafael J. Wysocki
* acpi-lpss: ACPI / LPSS: override SDIO private register space size from ACPI tables ACPI / LPSS: mask the UART TX completion interrupt ACPI / LPSS: add support for Intel BayTrail Conflicts: drivers/acpi/acpi_lpss.c (with commit b9e95fc)
2013-06-28Merge branch 'acpi-pm'Rafael J. Wysocki
* acpi-pm: ACPI / PM: Rework and clean up acpi_dev_pm_get_state() ACPI / PM: Replace ACPI_STATE_D3 with ACPI_STATE_D3_COLD in device_pm.c ACPI / PM: Rename function acpi_device_power_state() and make it static ACPI / PM: acpi_processor_suspend() can be static xen / ACPI / sleep: Register an acpi_suspend_lowlevel callback. x86 / ACPI / sleep: Provide registration for acpi_suspend_lowlevel.
2013-06-28Merge branch 'acpi-scan'Rafael J. Wysocki
* acpi-scan: ACPI / scan: Do not bind ACPI drivers to objects with scan handlers ACPI / ia64 / sba_iommu: Use ACPI scan handler for device discovery ACPI / scan: Simplify ACPI driver probing
2013-06-28Merge branch 'acpica'Rafael J. Wysocki
* acpica: (21 commits) ACPICA: Update version to 20130517 ACPICA: _CST repair: Handle null package entries ACPICA: Add several repairs for _CST predefined name ACPICA: Move _PRT repair into the standard complex repair module ACPICA: Clear events initialized flag upon event component termination ACPICA: Fix possible memory leak in GPE init error path ACPICA: ACPICA Termination: Delete global lock pending lock ACPICA: Update interface to acpi_ut_valid_acpi_name() ACPICA: Do not use extended sleep registers unless HW-reduced bit is set ACPICA: Split table print utilities to a new a separate file ACPICA: Add option to disable loading of SSDTs from the RSDT/XSDT ACPICA: Standardize all switch() blocks ACPICA: Split internal error msg routines to a separate file ACPICA: Split buffer dump routines into separate file ACPICA: Update version to 20130418 ACPICA: Update for "orphan" embedded controller _REG method support ACPICA: Remove unused macros, no functional change ACPICA: Predefined name support: Remove unused local variable ACPICA: Add argument typechecking for all predefined ACPI names ACPICA: Add BIOS error interface for predefined name validation support ...
2013-06-28Merge branch 'acpi-hotplug'Rafael J. Wysocki
* acpi-hotplug: ACPI: Do not use CONFIG_ACPI_HOTPLUG_MEMORY_MODULE ACPI / cpufreq: Add ACPI processor device IDs to acpi-cpufreq Memory hotplug: Move alternative function definitions to header ACPI / processor: Fix potential NULL pointer dereference in acpi_processor_add() Memory hotplug / ACPI: Simplify memory removal ACPI / scan: Add second pass of companion offlining to hot-remove code Driver core / MM: Drop offline_memory_block() ACPI / processor: Pass processor object handle to acpi_bind_one() ACPI: Drop removal_type field from struct acpi_device Driver core / memory: Simplify __memory_block_change_state() ACPI / processor: Initialize per_cpu(processors, pr->id) properly CPU: Fix sysfs cpu/online of offlined CPUs Driver core: Introduce offline/online callbacks for memory blocks ACPI / memhotplug: Bind removable memory blocks to ACPI device nodes ACPI / processor: Use common hotplug infrastructure ACPI / hotplug: Use device offline/online for graceful hot-removal Driver core: Use generic offline/online for CPU offline/online Driver core: Add offline/online device operations
2013-06-28irqchip: exynos-combiner: Staticize combiner_initSachin Kamat
combiner_init() is referenced only in this file. Make it static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: kgene.kim@samsung.com Cc: t.figa@samsung.com Cc: arnd@arndb.de Cc: patches@linaro.org Link: http://lkml.kernel.org/r/1372246597-32323-2-git-send-email-sachin.kamat@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-28ACPI / PM: Fix possible NULL pointer deref in acpi_pm_device_sleep_state()Rafael J. Wysocki
After commit fa1675b (ACPI / PM: Rework and clean up acpi_dev_pm_get_state()) a NULL pointer dereference will take place if NULL is passed to acpi_pm_device_sleep_state() as the second argument. Fix that by avoiding to use the pointer that may be NULL until it's necessary to store a return value at the location pointed to by it (if not NULL). Reported-and-tested-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-28Revert "drm: kms_helper: don't lose hotplug event"Dave Airlie
This reverts commit 160954b7bca43da7cd3cfbce310e6df919a8216e. This was rearming the workqueue with a 0 timeout, causing a WARN_ON, and possible loop. Daniel writes: "I've looked a bit into this and I think we need to have a separate work struct for recovering these lost hotplug events since the continuous self-rearming case is a real risk (e.g. if a connector flip-flops all the time). At least I don't see a sane way to block out re-arming with the current code in a simple way. So reverting the offender seems like the right thing and I'll go back to the drawing board for 3.12." Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28Merge tag 'fbdev-3.11-2' of git://gitorious.org/linux-omap-dss2/linux into ↵Jean-Christophe PLAGNIOL-VILLARD
fbdev/for-next Various fbdev changes for 3.11 * xilinxfb updates * Small cleanups and fixes to multiple drivers
2013-06-28Merge tag 'omapdss-for-3.11-2' of git://gitorious.org/linux-omap-dss2/linux ↵Jean-Christophe PLAGNIOL-VILLARD
into fbdev/for-next OMAP display subsystem changes for 3.11 (part 2/2) This is the second part of OMAP DSS changes for 3.11. This part contains the new DSS device model support. The current OMAP panel drivers use a custom DSS bus, and there's a hard limit of one external display block per video pipeline. In the new DSS device model the devices/drivers are made according to the control bus of the display block, usually platform, i2c or spi. The display blocks can also be chained so that we can have separate drivers for setups with both external encoder and panel. To allow the current board files, which use the old style panels, to function, the old display drivers are left in their current state, and new ones are added to drivers/video/omap2/displays-new/. When the board files have been converted to use the new style panels, we can remove the old code. This is planned to happen in v3.12. Having to support two very different DSS device models makes the driver somewhat confusing in some parts, and prevents us from properly cleaning up some other parts. These cleanups will be done when the old code is removed. The new device model is designed with CDF (Common Display Framework) in mind. While CDF is still under work, the new DSS device model should be much more similar to CDF's model than the old device model, which should make the eventual conversion to CDF much easier.
2013-06-28Merge tag 'omapdss-for-3.11-1' of git://gitorious.org/linux-omap-dss2/linux ↵Jean-Christophe PLAGNIOL-VILLARD
into fbdev/for-next OMAP display subsystem changes for 3.11 (part 1/2) This is the first part of OMAP DSS changes for 3.11. This part contains fixes, cleanups and reorganizations that are not directly related to the new DSS device model that is added in part 2, although many of the reorganizations are made to make the part 2 possible. There should not be any functional changes visible to the user except the few bug fixes. The main new internal features: - Display (dis)connect support, which allows us to explicitly (dis)connect a whole display pipeline - Panel list, which allows us to operate without the specific DSS bus - Combine omap_dss_output to omap_dss_device, so that we have one generic "entity" for display pipeline blocks
2013-06-28lib: Move fonts from drivers/video/console/ to lib/fonts/Geert Uytterhoeven
Several drivers need font support independent of CONFIG_VT, cfr. commit 9cbce8d7e1dae0744ca4f68d62aa7de18196b6f4, "console/font: Refactor font support code selection logic"). Hence move the fonts and their support logic from drivers/video/console/ to its own library directory lib/fonts/. This also allows to limit processing of drivers/video/console/Makefile to CONFIG_VT=y again. [Kevin Hilman <khilman@linaro.org>: Update arch/arm/boot/compressed/Makefile] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-06-27Input: nspire-keypad - remove redundant dev_err call in nspire_keypad_probe()Wei Yongjun
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-27Merge branch 'for-next' of git://github.com/rydberg/linux into nextDmitry Torokhov
Pull in changes from Henrik: "a trivial MT documentation fix".
2013-06-27bonding: when cloning a MAC use NET_ADDR_STOLENnikolay@redhat.com
A simple semantic change, when a slave's MAC is cloned by the bond master then set addr_assign_type to NET_ADDR_STOLEN instead of NET_ADDR_SET. Also use bond_set_dev_addr() in BOND_FOM_ACTIVE mode to change the bond's MAC address because the assign_type has to be set properly. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-27bonding: remove unnecessary dev_addr_from_first membernikolay@redhat.com
In struct bonding there's a member called dev_addr_from_first which is used to denote when the bond dev should clone the first slave's MAC address but since we have netdev's addr_assign_type variable that is not necessary. We clone the first slave's MAC each time we have a random MAC set to the bond device. This has the nice side-effect of also fixing an inconsistency - when the MAC address of the bond dev is set after its creation, but prior to having slaves, it's not kept and the first slave's MAC is cloned. The only way to keep the MAC was to create the bond device with the MAC address set (e.g. through ip link). In all cases if the bond device is left without any slaves - its MAC gets reset to a random one as before. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-27bonding: remove unnecessary setup_by_slave membernikolay@redhat.com
We have a member called setup_by_slave in struct bonding to denote if the bond dev has different type than ARPHRD_ETHER, but that is already denoted in bond's netdev type variable if it was setup by the slave, so use that instead of the member. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-28drm/prime: add return check for dma_buf_fdYoungJun Cho
The dma_buf_fd() can return error when it fails to prepare fd, so the dma_buf needs to be put. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/prime: reorder drm_prime_add_buf_handle and remove prototypeSeung-Woo Kim
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/qxl: add missing access check for execbuffer ioctlDave Airlie
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/prime: fix to put an exported dma_buf for adding handle failureYoungJun Cho
When drm_prime_add_buf_handle() returns failure for an exported dma_buf, the dma_buf was already allocated and its refcount was increased, so it needs to be put. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/prime: support to cache mappingJoonyoung Shim
The drm prime also can support it like GEM CMA supports to cache mapping. It doesn't allow multiple mappings for one attachment. [airlied: rebased on top of other prime changes] Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/prime: replace NULL with error value in drm_prime_pages_to_sgYoungJun Cho
Instead of NULL, error value is casted with ERR_PTR() for drm_prime_pages_to_sg() and IS_ERR_OR_NULL() macro is replaced with IS_ERR() macro for drm_gem_map_dma_buf(). Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/prime: fix to check return of dma_map_sg in prime helperYoungJun Cho
The dma_map_sg(), in map_dma_buf callback operation of prime helper, can return 0 when it fails to map, so it needs to release related resources. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/gem: fix not to assign error value to gem nameYoungJun Cho
If idr_alloc() is failed, obj->name can be error value. Also it cleans up duplicated flink processing code. This regression has been introduced in commit 2e928815c1886fe628ed54623aa98d0889cf5509 Author: Tejun Heo <tj@kernel.org> Date: Wed Feb 27 17:04:08 2013 -0800 drm: convert to idr_alloc() Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: stable@vger.kernel.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/gem: add mutex lock when using drm_gem_mmap_objYoungJun Cho
The drm_gem_mmap_obj() has to be protected with dev->struct_mutex, but some caller functions do not. So it adds mutex lock to missing callers and adds assertion to check whether drm_gem_mmap_obj() is called with mutex lock or not. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/omap: drop the !FB_OMAP2 depDave Airlie
This ends up causing circularity and really let people shoot themselves in the foot. Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/vmwgfx: get rid of ttm_bo_is_reserved usageMaarten Lankhorst
Use lockdep_assert_held instead. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/radeon: get rid of ttm_bo_is_reserved usageMaarten Lankhorst
Try to use lockdep_assert_held or other alternatives where possible. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit (git 2.34.1) at 2025-10-02 02:22:20 +0000