| Age | Commit message (Collapse) | Author |
|---|
|
The new option is CONFIG_NULL_TTY_DEFAULT_CONSOLE.
if enabled, and CONFIG_VT is disabled, ttynull will become the default
primary console device.
ttynull will be the only console device usually with this option enabled.
Some architectures do call add_preferred_console() which may add another
console though.
Motivation:
Many distributions ship with CONFIG_VT enabled. On tested desktop hardware
if CONFIG_VT is disabled, the default console device falls back to
/dev/ttyS0 instead of /dev/tty.
This could cause issues in user space, and hardware problems:
1. The user space issues include the case where /dev/ttyS0 is
disconnected, and the TCGETS ioctl, which some user space libraries use
as a probe to determine if a file is a tty, is called on /dev/console and
fails. Programs that call isatty() on /dev/console and get an incorrect
false value may skip expected logging to /dev/console.
2. The hardware issues include the case if a user has a science instrument
or other device connected to the /dev/ttyS0 port, and they were to upgrade
to a kernel that is disabling the CONFIG_VT option, kernel logs will then
be sent to the device connected to /dev/ttyS0 unless they edit their
kernel command line manually.
The new CONFIG_NULL_TTY_DEFAULT_CONSOLE option will give users and
distribution maintainers an option to avoid this. Disabling CONFIG_VT and
enabling CONFIG_NULL_TTY_DEFAULT_CONSOLE will ensure the default kernel
console behavior is not dependent on hardware configuration by default, and
avoid unexpected new behavior on devices connected to the /dev/ttyS0 serial
port.
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Adam Simonelli <adamsimonelli@gmail.com>
Link: https://lore.kernel.org/r/20250314160749.3286153-2-adamsimonelli@gmail.com
[pmladek@suse.com: Fixed indentation of the commit message.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Add Networking Sub System Clock Controller (NSSCC) driver for ipq9574 based
devices.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20250313110359.242491-5-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for gpll0_out_aux clock which acts as the parent for
certain networking subsystem (nss) clocks.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20250313110359.242491-3-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for LT7170 and LT7171. The LT7170 and LT7171 are 20 A, 16 V,
Single- or Dual-Phase, Silent Switcher Step-Down Regulators with Digital
Power System Management.
The relevant registers in the LT7170 and LT7171 are similar to those in
the LTC3887, but with fewer channels. This adds the chip ID and
identification of ASCII to differentiate between the LT7170 and LT7171.
These devices support polling for status updates and clearing peak
values. The data format for voltage, current, and temperature is set to
IEEE754 for precision and compatibility.
Co-developed-by: Cherrence Sarip <cherrence.sarip@analog.com>
Signed-off-by: Cherrence Sarip <cherrence.sarip@analog.com>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Link: https://lore.kernel.org/r/20250317-hwmon-next-v1-3-da0218c38197@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250312073729.1430053-1-nichen@iscas.ac.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Commit f3974aca381e ("power: supply: bq27xxx: do not report bogus zero
values") breaks property reporting on chips which are reporting normal
values. During testing, excessive emphasis was evidently placed on the
chip with non-working conditions, and not enough testing was done on a
battery that had normal state.
A correct fix will be submitted in a separate patch.
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Closes: https://lore.kernel.org/linux-pm/CB5B8FE7-D619-4D30-BD2D-58B6CEF83D46@goldelico.com/
Fixes: f3974aca381e ("power: supply: bq27xxx: do not report bogus zero values")
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Link: https://lore.kernel.org/r/20250312121712.146109-2-absicsz@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Adding the writel() calls needs io.h, which apparently gets
transiently included somewhere on arm64, but not elsewhere.
Fixes: 6de0298a3925 ("perf/arm_cspmu: Generalise event filtering")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503150649.Dol8RBSh-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202503152245.cAG4FMfi-lkp@intel.com/
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/657935ca177024ad08d5ec6f85e8faf75f82cf65.1742212833.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The charge input threshold voltage register on the MAX77693 PMIC accepts
four values: 0x0 for 4.3v, 0x1 for 4.7v, 0x2 for 4.8v and 0x3 for 4.9v.
Due to an oversight, the driver calculated the values for 4.7v and above
starting from 0x0, rather than from 0x1 ([(4700000 - 4700000) / 100000]
gives 0).
Add 1 to the calculation to ensure that 4.7v is converted to a register
value of 0x1 and that the other two voltages are converted correctly as
well.
Fixes: 87c2d9067893 ("power: max77693: Add charger driver for Maxim 77693")
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250316-max77693-charger-input-threshold-fix-v1-1-2b037d0ac722@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Egpio feature allows IsLand Domain IOs to be reused as TLMM GPIOs.
sa8775p supports egpio feature for GPIOs ranging from 126 to 148.
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
Reviewed-by: Dmitry Baryshkov <lumag@kernel.org>
Link: https://lore.kernel.org/20250312072509.3247885-3-quic_wasimn@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
In commit 'cf9d052aa600 ("pinctrl: qcom: Don't clear pending interrupts
when enabling")' Doug establishes an expectation that edge interrupts
occurring while an interrupt is disabled should be delivered once the
interrupt is enabled again.
Implement a test to validate that this is the case.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/20250313-tlmm-test-disabled-irq-delivered-v1-1-f0be903732ac@oss.qualcomm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When submitting the TLMM test driver, Bjorn reported that some of the test
cases are failing for GPIOs that not are backed by PDC (i.e. "non-wakeup"
GPIOs that are handled directly in pinctrl-msm). Basically, lingering
latched interrupt state is still being delivered at IRQ request time, e.g.:
ok 1 tlmm_test_silent_rising
tlmm_test_silent_falling: ASSERTION FAILED at drivers/pinctrl/qcom/tlmm-test.c:178
Expected atomic_read(&priv->intr_count) == 0, but
atomic_read(&priv->intr_count) == 1 (0x1)
not ok 2 tlmm_test_silent_falling
tlmm_test_silent_low: ASSERTION FAILED at drivers/pinctrl/qcom/tlmm-test.c:178
Expected atomic_read(&priv->intr_count) == 0, but
atomic_read(&priv->intr_count) == 1 (0x1)
not ok 3 tlmm_test_silent_low
ok 4 tlmm_test_silent_high
Whether to report interrupts that came in while the IRQ was unclaimed
doesn't seem to be well-defined in the Linux IRQ API. However, looking
closer at these specific cases, we're actually reporting events that do not
match the interrupt type requested by the driver:
1. After "ok 1 tlmm_test_silent_rising", the GPIO is in low state and
configured for IRQF_TRIGGER_RISING.
2. (a) In preparation for "tlmm_test_silent_falling", the GPIO is switched
to high state. The rising interrupt gets latched.
(b) The GPIO is re-configured for IRQF_TRIGGER_FALLING, but the latched
interrupt isn't cleared.
(c) The IRQ handler is called for the latched interrupt, but there
wasn't any falling edge.
3. (a) For "tlmm_test_silent_low", the GPIO remains in high state.
(b) The GPIO is re-configured for IRQF_TRIGGER_LOW. This seems to
result in a phantom interrupt that gets latched.
(c) The IRQ handler is called for the latched interrupt, but the GPIO
isn't in low state.
4. (a) For "tlmm_test_silent_high", the GPIO is switched to low state.
(b) This doesn't result in a latched interrupt, because RAW_STATUS_EN
was cleared when masking the level-triggered interrupt.
Fix this by clearing the interrupt state whenever making any changes to the
interrupt configuration. This includes previously disabled interrupts, but
also any changes to interrupt polarity or detection type.
With this change, all 16 test cases are now passing for the non-wakeup
GPIOs in the TLMM.
Cc: stable@vger.kernel.org
Fixes: cf9d052aa600 ("pinctrl: qcom: Don't clear pending interrupts when enabling")
Reported-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Closes: https://lore.kernel.org/r/20250227-tlmm-test-v1-1-d18877b4a5db@oss.qualcomm.com/
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/20250312-pinctrl-msm-type-latch-v1-1-ce87c561d3d7@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The next line checks if this regmap_write() failed, but it doesn't
work because the assignment was accidentally left out. Add the
assignment.
Fixes: 60d69769c851 ("pinctrl: bcm281xx: Add support for BCM21664 pinmux")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/dfc15d59-7fa9-4f96-aacb-37c3df6d420d@stanley.mountain
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The platform_get_resource() returns NULL on error. It doesn't
return error pointers. Fix the error checking to match.
Fixes: e97435ab09f3 ("pinctrl: amd: isp411: Add amdisp GPIO pinctrl")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Link: https://lore.kernel.org/617f4c77-7837-4e24-9f4d-620ecfedf924@stanley.mountain
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Tegra devices have an 'sfsel' bit field that determines whether a pin
operates in SFIO (Special Function I/O) or GPIO mode. Currently,
tegra_pinctrl_gpio_disable_free() sets this bit when releasing a GPIO.
However, tegra_pinctrl_set_mux() can be called independently in certain
code paths where gpio_disable_free() is not invoked. In such cases, failing
to set the SFIO mode could lead to incorrect pin configurations, resulting
in functional issues for peripherals relying on SFIO.
This patch ensures that whenever set_mux() is called, the SFIO mode is
correctly set in the Mux Register if the 'sfsel' bit is present. This
prevents situations where the pin remains in GPIO mode despite being
configured for SFIO use.
Fixes: 971dac7123c7 ("pinctrl: add a driver for NVIDIA Tegra")
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Link: https://lore.kernel.org/20250306050542.16335-1-pshete@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Use the hidden bank register to identify whether the LDO voltage is
fixed or variable. Remove the read of 'richtek,fixed-microvolt'
property.
Fixes: af1296d15d89 ("regulator: rtq2208: Add fixed LDO VOUT property and check that matches the constraints")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/dae0321b710518ce32260336e3cc9caf2ba84215.1742204502.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the hidden bank RG to get the correct buck converter phase mapping.
Fixes: 85a11f55621a ("regulator: rtq2208: Add Richtek RTQ2208 SubPMIC")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/ae3245aa713f76000dbd20b4ad6f66d30611d3b8.1742204502.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pwm_num is set to 7 for these chips, but NCT6776_REG_PWM_MODE and
NCT6776_PWM_MODE_MASK only contain 6 values.
Fix this by adding another 0 to the end of each array.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20250312030832.106475-1-tasos@tasossah.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
cqhci timeouts observed on brcmstb platforms during suspend:
...
[ 164.832853] mmc0: cqhci: timeout for tag 18
...
Adding cqhci_suspend()/resume() calls to disable cqe
in sdhci_brcmstb_suspend()/resume() respectively to fix
CQE timeouts seen on PM suspend.
Fixes: d46ba2d17f90 ("mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)")
Cc: stable@vger.kernel.org
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250311165946.28190-1-kamal.dasu@broadcom.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This is only used to write a new NVM in order to upgrade the retimer
firmware. It does not make sense to expose it if upgrade is disabled.
This also makes it consistent with the router NVM upgrade.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Thomas reported connection issues on AMD system with Pluggable UD-4VPD
dock. After some experiments it looks like the device has some sort of
internal timeout that triggers reconnect. This is completely against the
USB4 spec, as there is no requirement for the host to enumerate the
device right away or even at all.
In Linux case the delay is caused by scanning of retimers on the link so
we can work this around by doing the scanning after the device router
has been enumerated.
Reported-by: Thomas Lynema <lyz27@yahoo.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219748
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
'cts' in sdio_uart_check_modem_status() is considered a 'bool', but
typed as signed 'int'. Make it 'bool' so it is clear the code does not
care about the masked value, but true/false.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250317070046.24386-18-jirislaby@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Currently, scmi_pd_power() explicitly verifies whether the requested
power state was applied by calling state_get(). While this check could
detect failures where the state was not properly updated, ensuring
correctness is the responsibility of the SCMI firmware.
Removing this redundant state_get() call eliminates an unnecessary
round-trip to the firmware, improving efficiency. Any mismatches
between the requested and actual states should be handled by the SCMI
firmware, which must return a failure if state_set() is unsuccessful.
Additionally, in some cases, checking the state after powering off a
domain may be unreliable or unsafe, depending on the firmware
implementation.
This patch removes the redundant verification, simplifying the function
without compromising correctness.
Reported-and-tested-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20250314095851.443979-1-sudeep.holla@arm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Kconfig treats the dependency as optional, but the header file only provides
normal declarations and no empty API stubs:
ld: fs/btrfs/extent_io.o: in function `writepage_delalloc':
extent_io.c:(.text+0x2b42): undefined reference to `__udivdi3'
ld: drivers/pmdomain/thead/th1520-pm-domains.o: in function `th1520_pd_power_off':
th1520-pm-domains.c:(.text+0x57): undefined reference to `th1520_aon_power_update'
ld: drivers/pmdomain/thead/th1520-pm-domains.o: in function `th1520_pd_power_on':
th1520-pm-domains.c:(.text+0x8a): undefined reference to `th1520_aon_power_update'
ld: drivers/pmdomain/thead/th1520-pm-domains.o: in function `th1520_pd_probe':
th1520-pm-domains.c:(.text+0xb8): undefined reference to `th1520_aon_init'
ld: th1520-pm-domains.c:(.text+0x1c6): undefined reference to `th1520_aon_power_update'
Since the firmware code can easily be enabled for compile testing, there
is no need to add stubs either, so just make it a hard dependency.
Fixes: dc9a897dbb03 ("pmdomain: thead: Add power-domain driver for TH1520")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://lore.kernel.org/r/20250314154834.4053416-1-arnd@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Amlogic A4 SoCs support 12 GPIO IRQ lines and 2 AO GPIO IRQ lines,
A5 SoCs support 12 GPIO IRQ lines, details are as below.
A4 IRQ Number:
- 72:55 18 pins on bank T
- 54:32 23 pins on bank X
- 31:16 16 pins on bank D
- 15:14 2 pins on bank E
- 13:0 14 pins on bank B
A4 AO IRQ Number:
- 7 1 pin on bank TESTN
- 6:0 7 pins on bank AO
A5 IRQ Number:
- 98 1 pin on bank TESTN
- 97:82 16 pins on bank Z
- 81:62 20 pins on bank X
- 61:48 14 pins on bank T
- 47:32 16 pins on bank D
- 31:27 5 pins on bank H
- 26:25 2 pins on bank E
- 24:14 11 pins on bank C
- 13:0 14 pins on bank B
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20250311-irqchip-gpio-a4-a5-v5-2-ca4cc276c18c@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-15-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-14-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-13-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-12-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-11-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-10-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-9-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-8-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Reduce the code complexity by using automatic lock guards with the
spinlock.
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-7-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-6-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-5-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-4-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-3-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-2-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Reduce the code complexity by using automatic lock guards with the raw
spinlock.
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-1-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next
Linux 6.14-rc7
|
|
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the
multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies
+secs_to_jiffies
(E
- * \( 1000 \| MSEC_PER_SEC \)
)
Link: https://lkml.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-3-a43967e36c88@linux.microsoft.com
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Maol <dlemoal@kernel.org>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Dongsheng Yang <dongsheng.yang@easystack.cn>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Frank Li <frank.li@nxp.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Ilpo Jarvinen <ilpo.jarvinen@linux.intel.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: James Bottomley <james.bottomley@HansenPartnership.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Niklas Cassel <cassel@kernel.org>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Shyam-sundar S-k <Shyam-sundar.S-k@amd.com>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the
multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies(E * 1000)
+secs_to_jiffies(E)
-msecs_to_jiffies(E * MSEC_PER_SEC)
+secs_to_jiffies(E)
While here, convert some timeouts that are denominated in seconds
manually.
[akpm@linux-foundation.org: fix build]
Link: https://lkml.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-2-a43967e36c88@linux.microsoft.com
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Maol <dlemoal@kernel.org>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Dongsheng Yang <dongsheng.yang@easystack.cn>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Frank Li <frank.li@nxp.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Ilpo Jarvinen <ilpo.jarvinen@linux.intel.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: James Bottomley <james.bottomley@HansenPartnership.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Niklas Cassel <cassel@kernel.org>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Shyam-sundar S-k <Shyam-sundar.S-k@amd.com>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In the general case, we don't know which of system shutdown or reboot is
the better action to take to protect hardware in an emergency situation.
We thus allow the policy to come from the device-tree in the form of an
optional critical-action OF property, but so far there was no way for the
end user to configure this.
With recent addition of the hw_protection parameter, the user can now
choose a default action for the case, where the driver isn't fully sure
what's the better course of action.
Let's make use of this by passing HWPROT_ACT_DEFAULT in absence of the
critical-action OF property.
As HWPROT_ACT_DEFAULT is shutdown by default, this introduces no
functional change for users, unless they start using the new parameter.
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-11-e1c09b090c0c@pengutronix.de
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matteo Croce <teknoraver@meta.com>
Cc: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In the general case, a driver doesn't know which of system shutdown or
reboot is the better action to take to protect hardware in an emergency
situation. For this reason, hw_protection_shutdown is going to be removed
in favor of hw_protection_trigger, which defaults to shutdown, but may be
configured at kernel runtime to be a reboot instead.
The ChromeOS EC situation is different as we do know that shutdown is the
correct action as the EC is programmed to force reset after the short
period, thus replace hw_protection_shutdown with __hw_protection_trigger
with HWPROT_ACT_SHUTDOWN as argument to maintain the same behavior.
No functional change.
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-9-e1c09b090c0c@pengutronix.de
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matteo Croce <teknoraver@meta.com>
Cc: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the core detects permanent regulator hardware failure or imminent
power failure of a critical supply, it will call hw_protection_shutdown in
an attempt to do a limited orderly shutdown followed by powering off the
system.
This doesn't work out well for many unattended embedded systems that don't
have support for shutdown and that power on automatically when power is
supplied:
- A brief power cycle gets detected by the driver
- The kernel powers down the system and SoC goes into shutdown mode
- Power is restored
- The system remains oblivious to the restored power
- System needs to be manually power cycled for a duration long enough
to drain the capacitors
Allow users to fix this by calling the newly introduced
hw_protection_trigger() instead: This way the hw_protection commandline or
sysfs parameter is used to dictate the policy of dealing with the
regulator fault.
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-8-e1c09b090c0c@pengutronix.de
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: Benson Leung <bleung@chromium.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matteo Croce <teknoraver@meta.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
for_each_possible_cpu() is currently used to initialize cpufreq.
However, in cpu_dev_register_generic(), for_each_present_cpu()
is used to register CPU devices which means the CPU devices are
only registered for present CPUs and not all possible CPUs.
With nosmp or maxcpus=0, only the boot CPU is present, lead
to the cpufreq probe failure or defer probe due to no cpu device
available for not present CPUs.
Change for_each_possible_cpu() to for_each_present_cpu() in the
above cpufreq drivers to ensure it only registers cpufreq for
CPUs that are actually present.
Fixes: b0c69e1214bc ("drivers: base: Use present CPUs in GENERIC_CPU_DEVICES")
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Explicitly state that zcomp compress/decompress must be called from
non-atomic context.
Link: https://lkml.kernel.org/r/20250303022425.285971-20-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Ensure the page used for local object data is freed on error out path.
Link: https://lkml.kernel.org/r/20250303022425.285971-19-senozhatsky@chromium.org
Fixes: 330edc2bc059 (zram: rework writeback target selection strategy)
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Ensure the page used for local object data is freed on error out path.
Link: https://lkml.kernel.org/r/20250303022425.285971-18-senozhatsky@chromium.org
Fixes: 3f909a60cec1 ("zram: rework recompress target selection strategy")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When configured with pre-trained compression/decompression dictionary
support, zstd requires custom memory allocator, which it calls internally
from compression()/decompression() routines. That means allocation from
atomic context (either under entry spin-lock, or per-CPU local-lock or
both). Now, with non-atomic zram read()/write(), those limitations are
relaxed and we can allow direct and indirect reclaim.
Link: https://lkml.kernel.org/r/20250303022425.285971-17-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
