summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-12-08net: mvneta: Indent some statementsDan Carpenter
These two statements were not indented correctly so it's sort of confusing. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08drivers: net: xgene: uninitialized variable in xgene_enet_free_pagepool()Dan Carpenter
We never set "slots" in this function. Fixes: a9380b0f7be8 ("drivers: net: xgene: Add support for Jumbo frame") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08vhost: remove unnecessary smp_mb from vhost_work_queuePeng Tao
test_and_set_bit() already implies a memory barrier. Signed-off-by: Peng Tao <bergwolf@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08vhost-vsock: remove unused vq variablePeng Tao
Signed-off-by: Peng Tao <bergwolf@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08spi: Add support for Armada 3700 SPI ControllerRomain Perier
Marvell Armada 3700 SoC comprises an SPI Controller. This Controller supports up to 4 SPI slave devices, with dedicated chip selects,supports SPI mode 0/1/2 and 3, CPIO or Fifo mode with DMA transfers and different SPI transfer mode (Single, Dual or Quad). This commit adds basic driver support for FIFO mode. In this mode, dedicated registers are used to store the instruction, the address, the read mode and the data. Write and Read FIFO are used to store the outcoming or incoming data. The data FIFOs are accessible via DMA or by the CPU. Only the CPU is supported for now. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-08rpmsg: qcom_smd: Correct return value for O_NONBLOCKBjorn Andersson
qcom_smd_send() should return -EAGAIN for non-blocking channels with insufficient space, so that we can propagate this event to user space. Fixes: 53e2822e56c7 ("rpmsg: Introduce Qualcomm SMD backend") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-12-08dmaengine: pl330: do not generate unaligned accessVladimir Murzin
When PL330 is used with !MMU the following fault is seen: Unhandled fault: alignment exception (0x801) at 0x8f26a002 Internal error: : 801 [#1] ARM Modules linked in: CPU: 0 PID: 640 Comm: dma0chan0-copy0 Not tainted 4.8.0-6a82063-clean+ #1600 Hardware name: ARM-Versatile Express task: 8f1baa80 task.stack: 8e6fe000 PC is at _setup_req+0x4c/0x350 LR is at 0x8f2cbc00 pc : [<801ea538>] lr : [<8f2cbc00>] psr: 60000093 sp : 8e6ffdc0 ip : 00000000 fp : 00000000 r10: 00000000 r9 : 8f2cba10 r8 : 8f2cbc00 r7 : 80000013 r6 : 8f21a050 r5 : 8f21a000 r4 : 8f2ac800 r3 : 8e6ffe18 r2 : 00944251 r1 : ffffffbc r0 : 8f26a000 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 00c5387c Process dma0chan0-copy0 (pid: 640, stack limit = 0x8e6fe210) Stack: (0x8e6ffdc0 to 0x8e700000) fdc0: 00000001 60000093 00000000 8f2cba10 8f26a000 00000004 8f0ae000 8f2cbc00 fde0: 8f0ae000 8f2ac800 8f21a000 8f21a050 80000013 8f2cbc00 8f2cba10 00000000 fe00: 60000093 801ebca0 8e6ffe18 000013ff 40000093 00000000 00944251 8f2ac800 fe20: a0000013 8f2b1320 00001986 00000000 00000001 000013ff 8f1e4f00 8f2cba10 fe40: 8e6fff6c 801e9044 00000003 00000000 fef98c80 002faf07 8e6ffe7c 00000000 fe60: 00000002 00000000 00001986 8f1f158d 8f1e4f00 80568de4 00000002 00000000 fe80: 00001986 8f1f53ff 40000001 80580500 8f1f158d 8001e00c 00000000 cfdfdfdf fea0: fdae2a25 00000001 00000004 8e6fe000 00000008 00000010 00000000 00000005 fec0: 8f2b1330 8f2b1334 8e6ffe80 8e6ffe8c 00001986 00000000 8f21a014 00000001 fee0: 8e6ffe60 8e6ffe78 00000002 00000000 000013ff 00000001 80568de4 8f1e8018 ff00: 0000158d 8055ec30 00000001 803f6b00 00001986 8f2cba10 fdae2a25 00000001 ff20: 8f1baca8 8e6fff24 8e6fff24 00000000 8e6fff24 ac6f3037 00000000 00000000 ff40: 00000000 8e6fe000 8f1e4f40 00000000 8f1e4f40 8f1e4f00 801e84ec 00000000 ff60: 00000000 00000000 00000000 80031714 dfdfdfcf 00000000 dfdfdfcf 8f1e4f00 ff80: 00000000 8e6fff84 8e6fff84 00000000 8e6fff90 8e6fff90 8e6fffac 8f1e4f40 ffa0: 80031640 00000000 00000000 8000f548 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 dfdfdfcf cfdfdfdf [<801ea538>] (_setup_req) from [<801ebca0>] (pl330_tasklet+0x41c/0x490) [<801ebca0>] (pl330_tasklet) from [<801e9044>] (dmatest_func+0xb58/0x149c) [<801e9044>] (dmatest_func) from [<80031714>] (kthread+0xd4/0xec) [<80031714>] (kthread) from [<8000f548>] (ret_from_fork+0x14/0x2c) Code: e3a03001 e3e01043 e5c03001 e59d3048 (e5802002) This happens because _emit_{ADDH,MOV,GO) accessing to unaligned data while writing to buffer. Fix it with writing to buffer byte by byte. Reviewed-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-12-08dmaengine: k3dma: move to dma_pool_zallocVinod Koul
Replace dma_pool_alloc & memset with dma_pool_zalloc. Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-12-08dmaengine: at_hdmac: move to dma_pool_zallocVinod Koul
Replace dma_pool_alloc & memset with dma_pool_zalloc. Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-12-08iw_cxgb4: Fix error return code in c4iw_rdev_open()Wei Yongjun
Fix to return error code -ENOMEM from the __get_free_page() error handling case instead of 0, as done elsewhere in this function. Fixes: 05eb23893c2c ("cxgb4/iw_cxgb4: Doorbell Drop Avoidance Bug Fixes") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-08can: peak: fix bad memory access and free sequence추지호
Fix for bad memory access while disconnecting. netdev is freed before private data free, and dev is accessed after freeing netdev. This makes a slub problem, and it raise kernel oops with slub debugger config. Signed-off-by: Jiho Chu <jiho.chu@samsung.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-12-08mmc: sdhci-cadence: add Cadence SD4HC supportMasahiro Yamada
Add a driver for the Cadence SD4HC SD/SDIO/eMMC Controller. For SD, it basically relies on the SDHCI standard code. For eMMC, this driver provides some callbacks to support the hardware part that is specific to this IP design. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-08mmc: sdhci: export sdhci_execute_tuning()Masahiro Yamada
Some SDHCI-compat controllers support not only SD, but also eMMC, but they use different commands for tuning: CMD19 for SD, CMD21 for eMMC. Due to the difference of the underlying mechanism, some controllers (at least, the Cadence IP is the case) provide their own registers for the eMMC tuning. This commit will be useful when we want to override .execute_tuning callback (for eMMC HS200 tuning), but still let it fall back to sdhci_execute_tuning() for SD timing. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-08drm/omap: tpd12s015: fix error handlingTomi Valkeinen
tpd12s015 driver is missing error value handling for gpio initialization, causing 0 to be returned as an error if gpiod_get_* fails. This may cause deferred probing to fail. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-12-08drm/omap: fix primary-plane's possible_crtcsTomi Valkeinen
We set the possible_crtc for all planes to "(1 << priv->num_crtcs) - 1", which is fine as the HW planes can be used fro all crtcs. However, when we're doing that, we are still incrementing 'num_crtcs', and we'll end up with bad possible_crtcs, preventing the use of the primary planes. This patch passes a possible_crtcs mask to plane init function so that we get correct possible_crtc. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-12-08drm: fix possible_crtc's typeTomi Valkeinen
drm_universal_plane_init() and drm_plane_init() take "unsigned long possible_crtcs" parameter, but then stuff it into uint32_t. Change the parameter to uint32_t. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2016-12-08drm: Take ownership of the dmabuf->obj when exportingChris Wilson
Currently the reference for the dmabuf->obj is incremented for the dmabuf in drm_gem_prime_handle_to_fd() (at the high level userspace interface), but is released in drm_gem_dmabuf_release() (the lowlevel handler). Improve the symmetry of the dmabuf->obj ownership by acquiring the reference in drm_gem_dmabuf_export(). This makes it easier to use the prime functions directly. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Update kerneldoc.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161207214527.22533-1-chris@chris-wilson.co.uk
2016-12-08drm: Allow CAP_PRIME on !MODESETDaniel Vetter
vgem (and our igt tests using vgem) need this. I suspect etnaviv will fare similarly. v2. Make it build. Oops. Fixes: d5264ed3823a ("drm: Return -ENOTSUPP when called for KMS cap with a non-KMS driver") Cc: Michel Dänzer <michel.daenzer@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161207144939.22756-1-daniel.vetter@ffwll.ch
2016-12-08xen: xenbus: set error code on failurePan Bian
Variable err is initialized with 0. As a result, the return value may be 0 even if get_zeroed_page() fails to allocate memory. This patch fixes the bug, initializing err with "-ENOMEM". Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2016-12-08xen: set error code on failuresPan Bian
Variable rc is reset in the loop, and its value will be non-negative during the second and after repeat of the loop. If it fails to allocate memory then, it may return a non-negative integer, which indicates no error. This patch fixes the bug, assigning "-ENOMEM" to rc when kzalloc() or alloc_page() returns NULL, and removing the initialization of rc outside of the loop. Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2016-12-08Bluetooth: btmrvl: drop duplicate header slab.hGeliang Tang
Drop duplicate header slab.h from btmrvl_drv.h. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-12-08ieee802154: atusb: implement .set_frame_retries ops callbackStefan Schmidt
From firmware version 0.3 onwards we use the TX_ARET mode allowing for automatic frame retransmissions. To actually make use of this feature we need to implement the callback for setting the frame retries. If the firmware version is to old print a warning and return with invalid value. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-12-08ieee802154: atusb: try to read permanent extended address from deviceStefan Schmidt
With version 0.3 the atusb firmware offers an interface to read a permanent EUI64 address from the devices EEPROM. This patch checks if the firmware is new enough and tries to read out and use the address. If this does not work we fall back to the original randomly generated address. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-12-08ieee802154: atusb: store firmware version after retrieval for later useStefan Schmidt
The firmware versions will be used to enable selective features based on the available firmware on the device. Make sure we do not need to fetch it for every check but store it after the initial retrieval. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-12-08ieee802154: atusb: sync header file from firmware for new featuresStefan Schmidt
This file is shared between the atusb firmware and the kernel driver. In this update it brings the new interfaces from version 0.3 of the firmware. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-12-07Input: lpc32xx-keys - fix invalid error handling of a requested irqVladimir Zapolskiy
Semantics of NR_IRQS is different on machines with SPARSE_IRQ option disabled or enabled, in the latter case IRQs are allocated starting at least from the value specified by NR_IRQS and going upwards, so the check of (irq >= NR_IRQ) to decide about an error code returned by platform_get_irq() is completely invalid, don't attempt to overrule irq subsystem in the driver. The change fixes lpc32xx_keys driver initialization on boot: lpc32xx_keys 40050000.key: failed to get platform irq lpc32xx_keys: probe of 40050000.key failed with error -22 Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-07Input: synaptics-rmi4 - fix debug for sensor clipNick Dyer
The debug would only ever output zero for the clip information. Signed-off-by: Nick Dyer <nick@shmanahar.org> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-07zram: restrict add/remove attributes to root onlySergey Senozhatsky
zram hot_add sysfs attribute is a very 'special' attribute - reading from it creates a new uninitialized zram device. This file, by a mistake, can be read by a 'normal' user at the moment, while only root must be able to create a new zram device, therefore hot_add attribute must have S_IRUSR mode, not S_IRUGO. [akpm@linux-foundation.org: s/sence/sense/, reflow comment to use 80 cols] Fixes: 6566d1a32bf72 ("zram: add dynamic device add/remove functionality") Link: http://lkml.kernel.org/r/20161205155845.20129-1-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: Steven Allen <steven@stebalien.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> [4.2+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-08devfreq: rk3399_dmc: Don't use OPP structures outside of RCU locksViresh Kumar
The OPP structures are abused to the best here, without understanding how the OPP core and RCU locks work. In short, the OPP pointer saved in 'rk3399_dmcfreq' can become invalid under your nose, as the OPP core may free it. Fix various abuses around OPP structures and calls. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-08devfreq: rk3399_dmc: Remove dangling rcu_read_unlock()Viresh Kumar
This call never had the rcu_read_lock() counterpart. Remove the unlock part as well. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-08devfreq: exynos: Don't use OPP structures outside of RCU locksViresh Kumar
The OPP structures are abused to the best here, without understanding how the OPP core and RCU locks work. In short, the OPP pointer saved 'struct exynos_bus' can become invalid under your nose, as the OPP core may free it. Fix various abuses around OPP structures and calls. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-08cpufreq: intel_pstate: Support for energy performance hints with HWPSrinivas Pandruvada
It is possible to provide hints to the HWP algorithms in the processor to be more performance centric to more energy centric. These hints are provided by using HWP energy performance preference (EPP) or energy performance bias (EPB) settings. The scope of these settings is per logical processor, which means that each of the logical processors in the package can be programmed with a different value. This change provides cpufreq sysfs interface to provide hint. For each policy, two additional attributes will be available to check and provide hint. These attributes will only be present when the intel_pstate driver is using HWP mode. These attributes are: - energy_performance_available_preferences - energy_performance_preference To get list of supported hints: $ cat energy_performance_available_preferences default performance balance_performance balance_power power The current preference can be read or changed via cpufreq sysfs attribute "energy_performance_preference". Reading from this attribute will display current effective setting changed via any method. User can write any of the valid preference string to this attribute. User can always restore to power-on default by writing "default". Implementation Since these hints can be provided by direct MSR write or using some tools like x86_energy_perf_policy, the driver internally doesn't maintain any state. The user operation will result in direct read/write of MSR: 0x774 (HWP_REQUEST_MSR). Also driver use read modify write to update other fields in this MSR. Summary of changes: - struct cpudata field epp_saved is renamed to epp_powersave, as this stores the value to restore once policy is switched from performance to powersave to restore original powersave EPP value. - A new struct cpudata field epp_saved is used to store the raw MSR EPP/EPB value when a CPU goes offline or on suspend and restore on online/resume. This ensures that EPP value is restored to correct value irrespective of the means used to set. - EPP/EPB value ranges are fixed for each preference, which can be set for the cpufreq sysfs, so user request is mapped to/from this range. - New attributes are only added when HWP is present. - Since EPP value of 0 is valid the fields are initialized to -EINVAL when not valid. The field epp_default is read only once after powerup to avoid reading on subsequent CPU online operation - New suspend callback to store epp on suspend operation - Don't invalidate old epp_saved field on resume and online as now we can restore last epp value on suspend and this field can still have old EPP value sampled during switch to performance from powersave. - While here optimized setting of cpu_data->epp_powersave = epp in intel_pstate_hwp_set() as this was done in both true and false paths. - epp/epb set function returns error to caller on failure to pass on to user space for display. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-08cpufreq: intel_pstate: Add locking around HWP requestsSrinivas Pandruvada
To avoid race conditions from multiple threads, increase the scope of intel_pstate_limits_lock to include HWP requests also. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-08Merge tag 'meson-drm-for-4.10' of github.com:superna9999/linux into drm-nextDave Airlie
Add support for the Amlogic Meson Video Processing Unit - Only CVBS/Composite output for Amlogic Meson GXBB/GXL/GXM SoCs - Add MAINTAINERS entry - Add DT bindings documentation * tag 'meson-drm-for-4.10' of github.com:superna9999/linux: MAINTAINERS: add entry for Amlogic DRM drivers dt-bindings: display: add Amlogic Meson DRM Bindings drm: Add support for Amlogic Meson Graphic Controller
2016-12-08Merge tag 'drm-intel-next-fixes-2016-12-07' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-intel into drm-next first set of fixes for -next. * tag 'drm-intel-next-fixes-2016-12-07' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: Move priority bumping for flips earlier drm/i915: Hold a reference on the request for its fence chain drm/i915/audio: fix hdmi audio noise issue drm/i915/debugfs: Increment return value of gt.next_seqno drm/i915/debugfs: Drop i915_hws_info drm/i915: Initialize dev_priv->atomic_cdclk_freq at init time drm/i915: Fix cdclk vs. dev_cdclk mess when not recomputing things drm/i915: Make skl_write_{plane,cursor}_wm() static drm/i915: Complete requests in nop_submit_request drm/i915/gvt: fix lock not released bug for dispatch_workload() err path drm/i915/gvt: fix getting 64bit bar size error drm/i915/gvt: fix missing init param.primary
2016-12-08Merge branch 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes another regression fix for the shutdown stuff. * 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: just suspend the hw on pci shutdown
2016-12-08PM / sleep: Print active wakeup sources when blocking on wakeup_count readsxing wei
If there are any wakeup events being processed, read operation on /sys/power/wakeup_count will be blocked, so print the names of all active wakeup sources to help to find out who is preventing system suspend from triggering. While at it change pr_info() in pm_print_active_wakeup_sources() to pr_debug() to avoid excessive log noise. Signed-off-by: xing wei <xing.wei@intel.com> [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-08drm: mxsfb: Select DRM_PANELMarek Vasut
Select DRM_PANEL, since the MXSFB driver depends on it. Otherwise, we get the following error when compiling: drivers/built-in.o: In function `mxsfb_probe': core.c:(.text+0x9ce9c): undefined reference to `drm_panel_attach' core.c:(.text+0x9cff0): undefined reference to `drm_panel_detach' drivers/built-in.o: In function `mxsfb_panel_connector_destroy': core.c:(.text+0x9d614): undefined reference to `drm_panel_detach' drivers/built-in.o: In function `mxsfb_create_output': core.c:(.text+0x9d68c): undefined reference to `of_drm_find_panel' make: *** [Makefile:962: vmlinux] Error 1 Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Reported-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-12-07clk: clk-wm831x: fix a logic errorPan Bian
Fix bug https://bugzilla.kernel.org/show_bug.cgi?id=188561. Function wm831x_clkout_is_prepared() returns "true" when it fails to read CLOCK_CONTROL_1. "true" means the device is already prepared. So return "true" on the read failure seems improper. Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Fixes: f05259a6ffa4 ("clk: wm831x: Add initial WM831x clock driver") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-08PM / core: Fix bug in the error handling of async suspendSahitya Tummala
If async_suspend is enabled for parent and child devices, then PM framework has to ensure that parent's async suspend gets called only after child's async suspend is done. In case if child's async suspend fails with error, then parent's async suspend must not be invoked. The current code uses async_error to ensure this but there is a problem with it in __device_suspend(). This function notifies the completion of child's async suspend before updating its error via async_error variable. As a result, parent's async suspend gets invoked even though it's child suspend has failed. Fix this bug by updating the async_error before notifying the child's completion. Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> [ rjw: Rearranged wthitespace ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-07clk: uniphier: add cpufreq data for LD11, LD20 SoCsMasahiro Yamada
Add more data to 64bit SoCs for the cpufreq support. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-07clk: uniphier: add CPU-gear change (cpufreq) supportMasahiro Yamada
Core support code for CPU frequency changes, which will be used by the generic cpufreq driver. The register view is different from the generic clk-mux; it has a separate status register, and an update bit to load the register setting. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-07Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-12-07 This series contains updates to i40e and i40evf only. Filip modifies the i40e to log link speed change and when the link is brought up and down. Mitch replaces i40e_txd_use_count() with a new function which is slightly faster and better documented so the dim witted can better follow the code. Fixes the locking of the service task so that it is actually done in the service task and not in the scheduling function which calls the service task. Jacob, being the busy little beaver he is, provides most of the changes starting restores a workaround that is still needed in some configurations, specifically the Ethernet Controller XL710 for 40GbE QSFP+. Removes duplicate code and simplifies the i40e_vsi_add_vlan() and i40e_vsi_kill_vlan() functions. Removes detection of PTP frames over L4 (UDP) on the XL710 MAC, since there was a product decision to defeature it. Fixed a previous refactor of active filters which caused issues in the accounting of active_filters. Remaining work was done in the VLAN filters to improve readability and simplify code as much as possible to reduce inconsistencies. Alex fixes foul budget accounting in core code by returning actual work done, capped to budget-1. Henry fixes the "ethtool -p" function for 1G BaseT PHYs. Carolyn adds support for 25G devices for i40e and i40evf. Michal adds functions to apply the correct access method for external PHYs which could use Clause22 or Clause45 depending on the PHY. v2: dropped last patch from previous series, since changes are needed based on feedback from Sergei Shtylyov ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07scsi: qla4xxx: switch to pci_alloc_irq_vectorsChristoph Hellwig
And simplify the MSI-X logic in general - just request the two vectors directly instead of going through an indirection table. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Nilesh Javali <nilesh.javali@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-07scsi: hisi_sas: support deferred probe for v2 hwJohn Garry
In the hip06 and hip07 SoCs, the interrupt lines from the SAS controllers are connected to mbigen hw module [1]. The mbigen module is probed with module_init, and, as such, is not guaranteed to probe before the SAS driver. So we need to support deferred probe. We check for probe deferral in the hw layer probe, so we not probe into the main layer and allocate shost, memories, etc., to later learn that we need to defer the probe. [1] ./Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-07scsi: megaraid_sas: switch to pci_alloc_irq_vectorsHannes Reinecke
[mkp: fixed bad indentation] Signed-off-by: Hannes Reinecke <hare@suse.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-07scsi: scsi_devinfo: remove synchronous ALUA for NETAPP devicesXose Vazquez Perez
NetApp did confirm this is not required. Cc: Martin George <Martin.George@netapp.com> Cc: Robert Stankey <Robert.Stankey@netapp.com> Cc: Steven Schremmer <Steven.Schremmer@netapp.com> Cc: Sean Stewart <Sean.Stewart@netapp.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christophe Varoqui <christophe.varoqui@opensvc.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Cc: device-mapper development <dm-devel@redhat.com> Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Reviewed-by: Sean Stewart <sean.stewart@netapp.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-07PCI: pciehp: Prioritize data-link event over presence detectAshok Raj
If Slot Status indicates changes in both Data Link Layer Status and Presence Detect, prioritize the Link status change. When both events are observed, pciehp currently relies on the Slot Status Presence Detect State (PDS) to agree with the Link Status Data Link Layer Active status. The Presence Detect State, however, may be set to 1 through out-of-band presence detect even if the link is down, which creates conflicting events. Since the Link Status accurately reflects the reachability of the downstream bus, the Link Status event should take precedence over a Presence Detect event. Skip checking the PDC status if we handled a link event in the same handler. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-12-07PCI: rcar: Add gen3 fallback compatibility string for pcie-rcarSimon Horman
Add fallback compatibility string for the R-Car Gen 3 family. This is in keeping with the both the existing fallback compatibility string for the R-Car Gen 2 family and the fallback scheme being adopted wherever appropriate for drivers for Renesas SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-07PCI: rcar: Use gen2 fallback compatibility lastSimon Horman
Improve readability by listing fallback compatibility strings after the more-specific compatibility strings they provide a fallback for. This does not affect run-time behaviour as it is the order in the DTB that determines which compatibility string is used. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit (git 2.34.1) at 2025-09-15 22:01:53 +0000