summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-03-06bcache: fixup bcache_dev_sectors_dirty_add() multithreaded CPU false sharingMingzhe Zou
When attaching a cached device (a.k.a backing device) to a cache device, bch_sectors_dirty_init() is called to count dirty sectors and stripes (see what bcache_dev_sectors_dirty_add() does) on the cache device. When bcache_dev_sectors_dirty_add() is called, set_bit(stripe, d->full_dirty_stripes) or clear_bit(stripe, d->full_dirty_stripes) operation will always be performed. In full_dirty_stripes, each 1bit represents stripe_size (8192) sectors (512B), so 1bit=4MB (8192*512), and each CPU cache line=64B=512bit=2048MB. When 20 threads process a cached disk with 100G dirty data, a single thread processes about 23M at a time, and 20 threads total 460M. These full_dirty_stripes bits corresponding to the 460M data is likely to fall in the same CPU cache line. When one of these threads performs a set_bit or clear_bit operation, the same CPU cache line of other threads will become invalid and must read the full_dirty_stripes from the main memory again. Compared with single thread, the time of a bcache_dev_sectors_dirty_add() call is increased by about 50 times in our test (100G dirty data, 20 threads, bcache_dev_sectors_dirty_add() is called more than 20 million times). This patch tries to test_bit before set_bit or clear_bit operation. Therefore, a lot of force set and clear operations will be avoided, and most of bcache_dev_sectors_dirty_add() calls will only read CPU cache line. Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn> Signed-off-by: Coly Li <colyli@suse.de>
2022-03-06bonding: helper macro __ATTR_RO to make code more clearLianjie Zhang
Signed-off-by: Lianjie Zhang <zhanglianjie@uniontech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06vhost: remove avail_event arg from vhost_update_avail_event()Stefano Garzarella
In vhost_update_avail_event() we never used the `avail_event` argument, since its introduction in commit 2723feaa8ec6 ("vhost: set log when updating used flags or avail event"). Let's remove it to clean up the code. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20220113141134.186773-1-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-06virtio: drop default for virtio-memMichael S. Tsirkin
There's no special reason why virtio-mem needs a default that's different from what kconfig provides, any more than e.g. virtio blk. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David Hildenbrand <david@redhat.com>
2022-03-06vdpa: fix use-after-free on vp_vdpa_removeZhang Min
When vp_vdpa driver is unbind, vp_vdpa is freed in vdpa_unregister_device and then vp_vdpa->mdev.pci_dev is dereferenced in vp_modern_remove, triggering use-after-free. Call Trace of unbinding driver free vp_vdpa : do_syscall_64 vfs_write kernfs_fop_write_iter device_release_driver_internal pci_device_remove vp_vdpa_remove vdpa_unregister_device kobject_release device_release kfree Call Trace of dereference vp_vdpa->mdev.pci_dev: vp_modern_remove pci_release_selected_regions pci_release_region pci_resource_len pci_resource_end (dev)->resource[(bar)].end Signed-off-by: Zhang Min <zhang.min9@zte.com.cn> Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Link: https://lore.kernel.org/r/20220301091059.46869-1-wang.yi59@zte.com.cn Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Fixes: 64b9f64f80a6 ("vdpa: introduce virtio pci driver") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2022-03-06virtio-blk: Remove BUG_ON() in virtio_queue_rq()Xie Yongji
Currently we have a BUG_ON() to make sure the number of sg list does not exceed queue_max_segments() in virtio_queue_rq(). However, the block layer uses queue_max_discard_segments() instead of queue_max_segments() to limit the sg list for discard requests. So the BUG_ON() might be triggered if virtio-blk device reports a larger value for max discard segment than queue_max_segments(). To fix it, let's simply remove the BUG_ON() which has become unnecessary after commit 02746e26c39e("virtio-blk: avoid preallocating big SGL for data"). And the unused vblk->sg_elems can also be removed together. Fixes: 1f23816b8eb8 ("virtio_blk: add discard and write zeroes support") Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Link: https://lore.kernel.org/r/20220304100058.116-2-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-06virtio-blk: Don't use MAX_DISCARD_SEGMENTS if max_discard_seg is zeroXie Yongji
Currently the value of max_discard_segment will be set to MAX_DISCARD_SEGMENTS (256) with no basis in hardware if device set 0 to max_discard_seg in configuration space. It's incorrect since the device might not be able to handle such large descriptors. To fix it, let's follow max_segments restrictions in this case. Fixes: 1f23816b8eb8 ("virtio_blk: add discard and write zeroes support") Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Link: https://lore.kernel.org/r/20220304100058.116-1-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-06vhost: fix hung thread due to erroneous iotlb entriesAnirudh Rayabharam
In vhost_iotlb_add_range_ctx(), range size can overflow to 0 when start is 0 and last is ULONG_MAX. One instance where it can happen is when userspace sends an IOTLB message with iova=size=uaddr=0 (vhost_process_iotlb_msg). So, an entry with size = 0, start = 0, last = ULONG_MAX ends up in the iotlb. Next time a packet is sent, iotlb_access_ok() loops indefinitely due to that erroneous entry. Call Trace: <TASK> iotlb_access_ok+0x21b/0x3e0 drivers/vhost/vhost.c:1340 vq_meta_prefetch+0xbc/0x280 drivers/vhost/vhost.c:1366 vhost_transport_do_send_pkt+0xe0/0xfd0 drivers/vhost/vsock.c:104 vhost_worker+0x23d/0x3d0 drivers/vhost/vhost.c:372 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> Reported by syzbot at: https://syzkaller.appspot.com/bug?extid=0abd373e2e50d704db87 To fix this, do two things: 1. Return -EINVAL in vhost_chr_write_iter() when userspace asks to map a range with size 0. 2. Fix vhost_iotlb_add_range_ctx() to handle the range [0, ULONG_MAX] by splitting it into two entries. Fixes: 0bbe30668d89e ("vhost: factor out IOTLB") Reported-by: syzbot+0abd373e2e50d704db87@syzkaller.appspotmail.com Tested-by: syzbot+0abd373e2e50d704db87@syzkaller.appspotmail.com Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com> Link: https://lore.kernel.org/r/20220305095525.5145-1-mail@anirudhrb.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-06wireless: Marvell: Use netif_rx().Sebastian Andrzej Siewior
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Ganapathi Bhat <ganapathi017@gmail.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: Sharvari Harisangam <sharvari.harisangam@nxp.com> Cc: Xinming Hu <huxinming820@gmail.com> Cc: libertas-dev@lists.infradead.org Cc: linux-wireless@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06wireless: brcmfmac: Use netif_rx().Sebastian Andrzej Siewior
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Arend van Spriel <aspriel@gmail.com> Cc: Chi-hsien Lin <chi-hsien.lin@infineon.com> Cc: Chung-hsien Hsu <chung-hsien.hsu@infineon.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: SHA-cyfmac-dev-list@infineon.com Cc: Wright Feng <wright.feng@infineon.com> Cc: brcm80211-dev-list.pdl@broadcom.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06wireless: Atheros: Use netif_rx().Sebastian Andrzej Siewior
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Kalle Valo <kvalo@kernel.org> Cc: Maya Erez <merez@codeaurora.org> Cc: linux-wireless@vger.kernel.org Cc: wil6210@qti.qualcomm.com Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06slip/plip: Use netif_rx().Sebastian Andrzej Siewior
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06mctp: serial: Use netif_rx().Sebastian Andrzej Siewior
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Jeremy Kerr <jk@codeconstruct.com.au> Cc: Matt Johnston <matt@codeconstruct.com.au> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06can: Use netif_rx().Sebastian Andrzej Siewior
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: linux-can@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06net: phy: Use netif_rx().Sebastian Andrzej Siewior
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Radu Pirea <radu-nicolae.pirea@oss.nxp.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06net: tun: track dropped skb via kfree_skb_reason()Dongli Zhang
The TUN can be used as vhost-net backend. E.g, the tun_net_xmit() is the interface to forward the skb from TUN to vhost-net/virtio-net. However, there are many "goto drop" in the TUN driver. Therefore, the kfree_skb_reason() is involved at each "goto drop" to help userspace ftrace/ebpf to track the reason for the loss of packets. The below reasons are introduced: - SKB_DROP_REASON_DEV_READY - SKB_DROP_REASON_NOMEM - SKB_DROP_REASON_HDR_TRUNC - SKB_DROP_REASON_TAP_FILTER - SKB_DROP_REASON_TAP_TXFILTER Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Joe Jin <joe.jin@oracle.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06net: tun: split run_ebpf_filter() and pskb_trim() into different "if statement"Dongli Zhang
No functional change. Just to split the if statement into different conditions to use kfree_skb_reason() to trace the reason later. Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Joe Jin <joe.jin@oracle.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06net: tap: track dropped skb via kfree_skb_reason()Dongli Zhang
The TAP can be used as vhost-net backend. E.g., the tap_handle_frame() is the interface to forward the skb from TAP to vhost-net/virtio-net. However, there are many "goto drop" in the TAP driver. Therefore, the kfree_skb_reason() is involved at each "goto drop" to help userspace ftrace/ebpf to track the reason for the loss of packets. The below reasons are introduced: - SKB_DROP_REASON_SKB_CSUM - SKB_DROP_REASON_SKB_GSO_SEG - SKB_DROP_REASON_SKB_UCOPY_FAULT - SKB_DROP_REASON_DEV_HDR - SKB_DROP_REASON_FULL_RING Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Joe Jin <joe.jin@oracle.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a fixup for Goodix touchscreen driver allowing it to work on certain Cherry Trail devices - a fix for imbalanced enable/disable regulator in Elam touchpad driver that became apparent when used with Asus TF103C 2-in-1 dock - a couple new input keycodes used on newer keyboards * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: HID: add mapping for KEY_ALL_APPLICATIONS HID: add mapping for KEY_DICTATE Input: elan_i2c - fix regulator enable count imbalance after suspend/resume Input: elan_i2c - move regulator_[en|dis]able() out of elan_[en|dis]able_power() Input: goodix - workaround Cherry Trail devices with a bogus ACPI Interrupt() resource Input: goodix - use the new soc_intel_is_byt() helper Input: samsung-keypad - properly state IOMEM dependency
2022-03-05Input: mt6779-keypad - add MediaTek keypad driverfengping.yu
This patch adds matrix keypad support for Mediatek SoCs. Signed-off-by: fengping.yu <fengping.yu@mediatek.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20220303154302.252041-3-mkorpershoek@baylibre.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-03-05drm/msm/a6xx: Fix missing ARRAY_SIZE() checkRob Clark
Fixes: f6d62d091cfd ("drm/msm/a6xx: add support for Adreno 660 GPU") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220305173405.914989-1-robdclark@gmail.com
2022-03-05mISDN: Fix memory leak in dsp_pipeline_build()Alexey Khoroshilov
dsp_pipeline_build() allocates dup pointer by kstrdup(cfg), but then it updates dup variable by strsep(&dup, "|"). As a result when it calls kfree(dup), the dup variable contains NULL. Found by Linux Driver Verification project (linuxtesting.org) with SVACE. Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Fixes: 960366cf8dbb ("Add mISDN DSP") Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: add an nvm test for hw diagnoseVikas Gupta
Add an NVM test function for devlink hw reporter. In this function an NVM VPD area is read followed by a write. Test result is cached and if it is successful then the next test can be conducted only after HW_RETEST_MIN_TIME to avoid frequent writes to the NVM. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: implement hw health reporterKalesh AP
This reporter will report NVM errors which are non-fatal. When we receive these NVM error events, we'll report it through this new hw health reporter. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: Do not destroy health reporters during resetEdwin Peer
Health reporter state should be maintained over resets. Previously reporters were destroyed if the device capabilities changed, but since none of the reporters depend on capabilities anymore, this logic should be removed. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: Eliminate unintended link toggle during FW resetMichael Chan
If the flow control settings have been changed, a subsequent FW reset may cause the ethernet link to toggle unnecessarily. This link toggle will increase the down time by a few seconds. The problem is caused by bnxt_update_phy_setting() detecting a false mismatch in the flow control settings between the stored software settings and the current FW settings after the FW reset. This mismatch is caused by the AUTONEG bit added to link_info->req_flow_ctrl in an inconsistent way in bnxt_set_pauseparam() in autoneg mode. The AUTONEG bit should not be added to link_info->req_flow_ctrl. Reviewed-by: Colin Winegarden <colin.winegarden@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: Properly report no pause support on some cardsMichael Chan
Some cards are configured to never support link pause or PFC. Discover these cards and properly report no pause support to ethtool. Disable PFC settings from DCBNL if PFC is unsupported. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: introduce initial link state of unknownEdwin Peer
This will force link state to always be logged for initial NIC open. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: parse result field when NVRAM package install failsKalesh AP
Instead of always returning -ENOPKG, decode the firmware error code further when the HWRM_NVM_INSTALL_UPDATE firmware call fails. Return a more suitable error code to userspace and log an error in dmesg. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: add more error checks to HWRM_NVM_INSTALL_UPDATEKalesh AP
FW returns error code "NVM_INSTALL_UPDATE_CMD_ERR_CODE_ANTI_ROLLBACK" in the response to indicate that HWRM_NVM_INSTALL_UPDATE command has failed due to Anti-rollback feature. Parse the error and return an appropriate error code to the user. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: refactor error handling of HWRM_NVM_INSTALL_UPDATEKalesh AP
This is in anticipation of handling more "cmd_err" from FW in the next patch. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05net: axienet: add coalesce timer ethtool configurationRobert Hancock
Add the ability to configure the RX/TX coalesce timer with ethtool. Change default setting to scale with the clock rate rather than being a fixed number of clock cycles. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05net: axienet: reduce default RX interrupt threshold to 1Robert Hancock
Now that NAPI has been implemented, the hardware interrupt mitigation mechanism is not needed to avoid excessive interrupt load in most cases. Reduce the default RX interrupt threshold to 1 to reduce introduced latency. This can be increased with ethtool if desired if some applications still want to reduce interrupts. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05net: axienet: implement NAPI and GRO receiveRobert Hancock
Implement NAPI and GRO receive. In addition to better performance, this also avoids handling RX packets in hard IRQ context, which reduces the IRQ latency impact to other devices. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05net: axienet: don't set IRQ timer when IRQ delay not usedRobert Hancock
When the RX or TX coalesce count is set to 1, there's no point in setting the delay timer value since an interrupt will already be raised on every packet, and the delay interrupt just causes extra pointless interrupts. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05net: axienet: Clean up DMA start/stop and error handlingRobert Hancock
Simplify the DMA error handling process, and remove some duplicated code between the DMA error handling and the stop function. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05net: axienet: Clean up device used for DMA callsRobert Hancock
Instead of using lp->ndev.parent to find the correct device to use for DMA API calls, just use the dev attribute in the device structure. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05net: axienet: fix RX ring refill allocation failure handlingRobert Hancock
If a memory allocation error occurred during an attempt to refill a slot in the RX ring after the packet was received, the hardware tail pointer would still have been updated to point to or past the slot which remained marked as previously completed. This would likely result in the DMA engine raising an error when it eventually tried to use that slot again. If a slot cannot be refilled, then just stop processing and do not move the tail pointer past it. On the next attempt, we should skip receiving the packet from the empty slot and just try to refill it again. This failure mode has not actually been observed, but was found as part of other driver updates. Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05net: dsa: realtek: rtl8365mb: add support for rtl8_4tLuiz Angelo Daros de Luca
The trailing tag is also supported by this family. The default is still rtl8_4 but now the switch supports changing the tag to rtl8_4t. Reintroduce the dropped cpu in struct rtl8365mb (removed by 6147631). Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04drm/msm: Add MSM_SUBMIT_FENCE_SN_INRob Clark
Add a way for userspace to specify the sequence number fence used to track completion of the submit. As the seqno fence is simply an incrementing counter which is local to the submitqueue, it is easy for userspace to know the next value. This is useful for native userspace drivers in a vm guest, as the guest to host roundtrip can have high latency. Assigning the fence seqno in the guest userspace allows the guest to continue without waiting for response from the host. Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20220224222321.60653-1-robdclark@gmail.com
2022-03-04bcm63xx_enet: Use platform_get_irq() to get the interruptMeng Tang
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypassed the hierarchical setup and messed up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by: Meng Tang <tangmeng@uniontech.com> Link: https://lore.kernel.org/r/20220303100815.25605-1-tangmeng@uniontech.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-04net: phy: meson-gxl: fix interrupt handling in forced modeHeiner Kallweit
This PHY doesn't support a link-up interrupt source. If aneg is enabled we use the "aneg complete" interrupt for this purpose, but if aneg is disabled link-up isn't signaled currently. According to a vendor driver there's an additional "energy detect" interrupt source that can be used to signal link-up if aneg is disabled. We can safely ignore this interrupt source if aneg is enabled. This patch was tested on a TX3 Mini TV box with S905W (even though boot message says it's a S905D). This issue has been existing longer, but due to changes in phylib and the driver the patch applies only from the commit marked as fixed. Fixes: 84c8f773d2dc ("net: phy: meson-gxl: remove the use of .ack_callback()") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/04cac530-ea1b-850e-6cfa-144a55c4d75d@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-04ptp: ocp: Add serial port information to the debug summaryJonathan Lemon
On the debug summary page, show the /dev/ttyS<port> mapping. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/r/20220304054615.1737-1-jonathan.lemon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-04net: sparx5: Fix initialization of variables on stackHoratiu Vultur
The variables 'res' inside the functions sparx5_ptp_get_1ppm and sparx5_ptp_get_nominal_value was not initialized. So in case of the default case of the switch after, it would return an uninitialized variable. This makes also the clang builds to failed. Fixes: 0933bd04047c3b ("net: sparx5: Add support for ptp clocks") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220304140918.3356873-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-04PCI: Reduce warnings on possible RW1C corruptionMark Tomlinson
For hardware that only supports 32-bit writes to PCI there is the possibility of clearing RW1C (write-one-to-clear) bits. A rate-limited messages was introduced by fb2659230120, but rate-limiting is not the best choice here. Some devices may not show the warnings they should if another device has just produced a bunch of warnings. Also, the number of messages can be a nuisance on devices which are otherwise working fine. Change the ratelimit to a single warning per bus. This ensures no bus is 'starved' of emitting a warning and also that there isn't a continuous stream of warnings. It would be preferable to have a warning per device, but the pci_dev structure is not available here, and a lookup from devfn would be far too slow. Suggested-by: Bjorn Helgaas <helgaas@kernel.org> Fixes: fb2659230120 ("PCI: Warn on possible RW1C corruption for sub-32 bit config writes") Link: https://lore.kernel.org/r/20200806041455.11070-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Scott Branden <scott.branden@broadcom.com>
2022-03-04RDMA/hns: Refactor the alloc_cqc()Wenpeng Liang
Abstract the alloc_cqc() into several parts and separate the process unrelated to allocating CQC. Link: https://lore.kernel.org/r/20220302064830.61706-10-liangwenpeng@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-03-04RDMA/hns: Refactor the alloc_srqc()Chengchang Tang
Abstract the alloc_srqc() into several parts and separate the alloc_srqn() from the alloc_srqc(). Link: https://lore.kernel.org/r/20220302064830.61706-9-liangwenpeng@huawei.com Signed-off-by: Chengchang Tang <tangchengchang@huawei.com> Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-03-04RDMA/hns: Clean up the return value check of hns_roce_alloc_cmd_mailbox()Wenpeng Liang
hns_roce_alloc_cmd_mailbox() never returns NULL, so the check should be IS_ERR(). And the error code should be converted as the function's return value. Link: https://lore.kernel.org/r/20220302064830.61706-8-liangwenpeng@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-03-04RDMA/hns: Remove similar code that configures the hardware contextsChengchang Tang
Remove duplicate code for creating and destroying hardware contexts via mailbox. Link: https://lore.kernel.org/r/20220302064830.61706-7-liangwenpeng@huawei.com Signed-off-by: Chengchang Tang <tangchengchang@huawei.com> Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-03-04RDMA/hns: Refactor mailbox functionsChengchang Tang
The current mailbox functions have too many parameters, making the code difficult to maintain. So construct a new structure mbox_msg to pass the information needed by mailbox. Link: https://lore.kernel.org/r/20220302064830.61706-6-liangwenpeng@huawei.com Signed-off-by: Chengchang Tang <tangchengchang@huawei.com> Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
generated by cgit (git 2.34.1) at 2025-09-21 18:45:48 +0000