| Age | Commit message (Collapse) | Author |
|---|
|
suspend/resume
When not configured for wakeup lis3lv02d_i2c_suspend() will call
lis3lv02d_poweroff() even if the device has already been turned off
by the runtime-suspend handler and if configured for wakeup and
the device is runtime-suspended at this point then it is not turned
back on to serve as a wakeup source.
Before commit b1b9f7a49440 ("misc: lis3lv02d_i2c: Add missing setting
of the reg_ctrl callback"), lis3lv02d_poweroff() failed to disable
the regulators which as a side effect made calling poweroff() twice ok.
Now that poweroff() correctly disables the regulators, doing this twice
triggers a WARN() in the regulator core:
unbalanced disables for regulator-dummy
WARNING: CPU: 1 PID: 92 at drivers/regulator/core.c:2999 _regulator_disable
...
Fix lis3lv02d_i2c_suspend() to not call poweroff() a second time if
already runtime-suspended and add a poweron() call when necessary to
make wakeup work.
lis3lv02d_i2c_resume() has similar issues, with an added weirness that
it always powers on the device if it is runtime suspended, after which
the first runtime-resume will call poweron() again, causing the enabled
count for the regulator to increase by 1 every suspend/resume. These
unbalanced regulator_enable() calls cause the regulator to never
be turned off and trigger the following WARN() on driver unbind:
WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put
Fix this by making lis3lv02d_i2c_resume() mirror the new suspend().
Fixes: b1b9f7a49440 ("misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callback")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/regressions/5fc6da74-af0a-4aac-b4d5-a000b39a63a5@molgen.mpg.de/
Cc: stable@vger.kernel.org
Cc: regressions@lists.linux.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 15 7590
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20240220190035.53402-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The HV_REGISTER_ are used as arguments to hv_set/get_register(), which
delegate to arch-specific mechanisms for getting/setting synthetic
Hyper-V MSRs.
On arm64, HV_REGISTER_ defines are synthetic VP registers accessed via
the get/set vp registers hypercalls. The naming matches the TLFS
document, although these register names are not specific to arm64.
However, on x86 the prefix HV_REGISTER_ indicates Hyper-V MSRs accessed
via rdmsrl()/wrmsrl(). This is not consistent with the TLFS doc, where
HV_REGISTER_ is *only* used for used for VP register names used by
the get/set register hypercalls.
To fix this inconsistency and prevent future confusion, change the
arch-generic aliases used by callers of hv_set/get_register() to have
the prefix HV_MSR_ instead of HV_REGISTER_.
Use the prefix HV_X64_MSR_ for the x86-only Hyper-V MSRs. On x86, the
generic HV_MSR_'s point to the corresponding HV_X64_MSR_.
Move the arm64 HV_REGISTER_* defines to the asm-generic hyperv-tlfs.h,
since these are not specific to arm64. On arm64, the generic HV_MSR_'s
point to the corresponding HV_REGISTER_.
While at it, rename hv_get/set_registers() and related functions to
hv_get/set_msr(), hv_get/set_nested_msr(), etc. These are only used for
Hyper-V MSRs and this naming makes that clear.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1708440933-27125-1-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1708440933-27125-1-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Add missing kerneldoc to silence:
qcom_aoss.c:93: warning: Function parameter or struct member 'debugfs_root' not described in 'qmp'
qcom_aoss.c:93: warning: Function parameter or struct member 'debugfs_files' not described in 'qmp'
Fixes: d51d984c5525 ("soc: qcom: aoss: Add debugfs interface for sending messages")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240225202545.59113-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Drop description of non-existing 'struct geni_wrapper' member:
qcom-geni-se.c:99: warning: Excess struct member 'to_core' description in 'geni_wrapper'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240225202545.59113-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The current register offset used for the GCC_UBI0_AXI_ARES reset
seems wrong. Or at least, the downstream driver uses [1] the same
offset which is used for other the GCC_UBI0_*_ARES resets.
Change the code to use the same offset used in the downstream
driver and also specify the reset bit explicitly to use the
same format as the followup entries.
1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4.r4/drivers/clk/qcom/gcc-ipq5018.c?ref_type=heads#L3773
Fixes: e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20240225-gcc-ipq5018-register-fixes-v1-3-3c191404d9f0@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The following table shows the values of the 'halt_reg' and the
'enable_reg' fields from the pcie clocks defined in the current
driver:
clock halt_reg enable_reg
gcc_pcie0_ahb_clk 0x75010 0x75010
gcc_pcie0_aux_clk 0x75014 0x75014
gcc_pcie0_axi_m_clk 0x75008 0x75008
gcc_pcie0_axi_s_bridge_clk 0x75048 0x75048
gcc_pcie0_axi_s_clk 0x7500c 0x7500c
gcc_pcie0_pipe_clk 0x75018 0x75018
gcc_pcie1_ahb_clk 0x76010 0x76010
gcc_pcie1_aux_clk 0x76014 0x76014
gcc_pcie1_axi_m_clk 0x76008 0x76008
gcc_pcie1_axi_s_bridge_clk 0x76048 0x76048
gcc_pcie1_axi_s_clk 0x7600c 0x7600c
gcc_pcie1_pipe_clk 8* 0x76018
Based on the table, it is quite likely that the pcie0 and the pci1
clocks are using the same register layout, however it seems that
the value of the 'halt_reg' field in the 'gcc_pcie1_pipe_clk' clock
is wrong.
In the downstream driver [1], the same '0x76018' value is used for
both the 'halt_reg' and for the 'enable_reg' fields of the
'gcc_pcie1_pipe_clk' clock.
Update the current driver to use the same value used downstream as
probably that is the correct value.
1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4.r4/drivers/clk/qcom/gcc-ipq5018.c?ref_type=heads#L2316
Fixes: e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20240225-gcc-ipq5018-register-fixes-v1-2-3c191404d9f0@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The value of the 'enable_reg' field in the 'gcc_gmac0_sys_clk'
clock definition seems wrong as it is greater than the
'max_register' value defined in the regmap configuration.
Additionally, all other gmac specific branch clock definitions
within the driver uses the same value both for the 'enable_reg'
and for the 'halt_reg' fields.
Due to the lack of documentation the correct value is not known.
Looking into the downstream driver does not help either, as that
uses the same (presumably wrong) value [1].
Nevertheless, change the 'enable_reg' field of 'gcc_gmac0_sys_clk'
to use the value from the 'halt_reg' field so it follows the pattern
used in other gmac clock definitions. The change is based on the
assumption that the register layout of this clock is the same
as the other gmac clocks.
1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4.r4/drivers/clk/qcom/gcc-ipq5018.c?ref_type=heads#L1889
Fixes: e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20240225-gcc-ipq5018-register-fixes-v1-1-3c191404d9f0@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The newly added code causes a build failure when -Werror is set:
drivers/soc/qcom/spm.c:388:12: error: 'spm_get_cpu' defined but not used [-Werror=unused-function]
Remove the #ifdef and instead use an IS_ENABLED() check that lets the
compiler perform dead code elimination instead of the preprocessor.
Fixes: 6496dba142f4 ("soc: qcom: spm: add support for voltage regulator")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240221154457.2007420-1-arnd@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Merge to pick up commit 47f419e07111 ("drm/dp: move
intel_dp_vsc_sdp_pack() to generic helper")
drm-misc-next for v6.9:
UAPI Changes:
Cross-subsystem Changes:
backlight:
- corgi: include backlight header
fbdev:
- Cleanup includes in public header file
- fbtft: Include backlight header
Core Changes:
edid:
- Remove built-in EDID data
dp:
- Avoid AUX transfers on powered-down displays
- Add VSC SDP helpers
modesetting:
- Add sanity checks for polling
- Cleanups
scheduler:
- Cleanups
tests:
- Add helpers for mode-setting tests
Driver Changes:
i915:
- Use shared VSC SDP helper
mgag200:
- Work around PCI write bursts
mxsfb:
- Use managed mode config
nouveau:
- Include backlight header where necessary
qiac:
- Cleanups
sun4:
- HDMI: updates to atomic mode setting
tegra:
- Fix GEM refounting in error paths
tidss:
- Fix multi display
- Fix initial Z position
v3d:
- Support display MMU page size
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the serio_bus variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240210-bus_cleanup-input2-v1-2-0daef7e034e0@marliere.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the variable rmi_bus_type to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240210-bus_cleanup-input2-v1-1-0daef7e034e0@marliere.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The existing comment block above the xps2_of_probe function
does not conform to the kernel-doc standard. This patch fixes the
documentation to match the expected kernel-doc format, which includes
a structured documentation header with param and return value.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240301092115.123092-1-yang.lee@linux.alibaba.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
IST3032C is a touchscreen chip used for instance in the
samsung,coreprimevelte smartphone, with which this was tested. Add the
chip specific information to the driver.
Reviewed-by: Markuss Broks <markuss.broks@gmail.com>
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Link: https://lore.kernel.org/r/20240301164659.13240-6-karelb@gimli.ms.mff.cuni.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Imagis IST3038B is another variant of Imagis IST3038 IC, which has
a different register interface from IST3038C (possibly firmware defined).
This should also work for IST3044B (though untested), however other
variants using this interface/protocol(IST3026, IST3032, IST3026B,
IST3032B) have a different format for coordinates, and they'd need
additional effort to be supported by this driver.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Link: https://lore.kernel.org/r/20240301164659.13240-4-karelb@gimli.ms.mff.cuni.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
As specified in downstream IST3038B driver and proved by testing,
the correct maximum reported value of touch area is 16.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Link: https://lore.kernel.org/r/20240301164659.13240-2-karelb@gimli.ms.mff.cuni.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add additional HyperX device identifiers to xpad_device and xpad_table.
Suggested-by: Chris Toledanes<chris.toledanes@hp.com>
Reviewed-by: Carl Ng <carl.ng@hp.com>
Signed-off-by: Max Nguyen <maxwell.nguyen@hp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/44ad5ffa-76d8-4046-94ee-2ef171930ed2@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
In a follow-up patch implementation of the LED audio trigger will be
moved to sound/core/snd_ctl_led, including removal of config symbol
LEDS_AUDIO_TRIGGER. Also as of today the audio mute LED trigger
is effectively a no-op w/o config symbol SND_CTL_LED being defined.
Therefore switch the dependency to this config symbol.
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/6011ca63-187c-42dd-a5fd-7dd733d6257c@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- qcom: m31 pointer err fix, eusb2 fix redundant zero-out loop and v3
offset fix on qmp-usb
- freescale: fix for dphy alias
* tag 'phy-fixes2-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: qcom-qmp-usb: fix v3 offsets data
phy: qualcomm: eusb2-repeater: Rework init to drop redundant zero-out loop
phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR()
phy: freescale: phy-fsl-imx8-mipi-dphy: Fix alias name to use dashes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- dw-edma fixes to improve driver and remote HDMA setup
- fsl-edma fixes for SoC hange, irq init and byte calculations and
sparse fixes
- idxd: safe user copy of completion record fix
- ptdma: consistent DMA mask fix
* tag 'dmaengine-fix2-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: ptdma: use consistent DMA masks
dmaengine: fsl-qdma: add __iomem and struct in union to fix sparse warning
dmaengine: idxd: Ensure safe user copy of completion record
dmaengine: fsl-edma: correct max_segment_size setting
dmaengine: idxd: Remove shadow Event Log head stored in idxd
dmaengine: fsl-edma: correct calculation of 'nbytes' in multi-fifo scenario
dmaengine: fsl-qdma: init irq after reg initialization
dmaengine: fsl-qdma: fix SoC may hang on 16 byte unaligned read
dmaengine: dw-edma: eDMA: Add sync read before starting the DMA transfer in remote setup
dmaengine: dw-edma: HDMA: Add sync read before starting the DMA transfer in remote setup
dmaengine: dw-edma: Add HDMA remote interrupt configuration
dmaengine: dw-edma: HDMA_V0_REMOTEL_STOP_INT_EN typo fix
dmaengine: dw-edma: Fix wrong interrupt bit set for HDMA
dmaengine: dw-edma: Fix the ch_count hdma callback
|
|
Utilize the helper function instead of casting from ->private_data
directly.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240219105206.335738-1-cezary.rojewski@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the
sdw_master_type and sdw_slave_type variables to be constant structures as
well, placing it into read-only memory which can not be modified at
runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240219-device_cleanup-soundwire-v1-1-9edd51767611@marliere.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.
There are currently a couple of objects (`alloc_head` and `bundle`) in
`struct bundle_priv` that contain a couple of flexible structures:
struct bundle_priv {
/* Must be first */
struct bundle_alloc_head alloc_head;
...
/*
* Must be last. bundle ends in a flex array which overlaps
* internal_buffer.
*/
struct uverbs_attr_bundle bundle;
u64 internal_buffer[32];
};
So, in order to avoid ending up with a couple of flexible-array members
in the middle of a struct, we use the `struct_group_tagged()` helper to
separate the flexible array from the rest of the members in the flexible
structures:
struct uverbs_attr_bundle {
struct_group_tagged(uverbs_attr_bundle_hdr, hdr,
... the rest of the members
);
struct uverbs_attr attrs[];
};
With the change described above, we now declare objects of the type of
the tagged struct without embedding flexible arrays in the middle of
another struct:
struct bundle_priv {
/* Must be first */
struct bundle_alloc_head_hdr alloc_head;
...
struct uverbs_attr_bundle_hdr bundle;
u64 internal_buffer[32];
};
We also use `container_of()` whenever we need to retrieve a pointer
to the flexible structures.
Notice that the `bundle_size` computed in `uapi_compute_bundle_size()`
remains the same.
So, with these changes, fix the following warnings:
drivers/infiniband/core/uverbs_ioctl.c:45:34: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
45 | struct bundle_alloc_head alloc_head;
| ^~~~~~~~~~
drivers/infiniband/core/uverbs_ioctl.c:67:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
67 | struct uverbs_attr_bundle bundle;
| ^~~~~~
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZeIgeZ5Sb0IZTOyt@neat
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The driver never sets a default timeout value, therefore it is
initialized to zero. When CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is
enabled, the watchdog is started during probe. The kernel is supposed to
automatically ping the watchdog from this point until userspace takes
over, but this does not happen if the configured timeout is zero. A zero
timeout causes watchdog_need_worker() to return false, so the heartbeat
worker does not run and the system therefore resets soon after the
driver is probed.
This patch fixes this by setting an arbitrary non-zero default timeout.
The default could be read from the hardware instead, but I didn't see
any reason to add this complexity.
This has been tested on an STM32F746.
Fixes: 85fdc63fe256 ("drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240228182723.12855-1-ben.wolsieffer@hefring.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
According to the datasheet, the core has an WDOGRESn input signal that
needs to be deasserted before being operational. Implement it in the
driver.
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240221-hisi-wdt-v3-1-9642613dc2e6@outlook.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add call backs to support suspend and resume.
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240214164941.630775-2-jerry.hoemann@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
System resume will start and enable watchdog regardless of whether the
watchdog is enabled/disabled during a system suspend.
Add a check to the watchdog status and only start and enable the
watchdog if the watchdog status is running/active.
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240130055118.1917086-1-jisheng.teoh@starfivetech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
In the probe function, pm_runtime_put_sync() will fail on platform with
runtime PM disabled.
Check if runtime PM is enabled before calling pm_runtime_put_sync() to
fix it.
Fixes: db728ea9c7be ("drivers: watchdog: Add StarFive Watchdog driver")
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240119082722.1133024-1-jisheng.teoh@starfivetech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
To determine the max_timeout value, the below calculation is used.
max_timeout = 0x10000000 / clk_rate
cat /sys/devices/platform/soc@0/b017000.watchdog/watchdog/watchdog0/max_timeout
8388
However, this is not valid for all the platforms. IPQ SoCs starting from
IPQ40xx and recent Snapdragron SoCs also has the bark and bite time field
length of 20bits, which can hold max up to 32 seconds if the clk_rate is
32KHz.
If the user tries to configure the timeout more than 32s, then the value
will be truncated and the actual value will not be reflected in the HW.
To avoid this, lets add a variable called max_tick_count in the device data,
which defines max counter value of the WDT controller. Using this, max-timeout
will be calculated in runtime for various WDT contorllers.
With this change, we get the proper max_timeout as below and restricts
the user from configuring the timeout higher than this.
cat /sys/devices/platform/soc@0/b017000.watchdog/watchdog/watchdog0/max_timeout
32
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240116-wdt-v2-1-501c7694c3f0@quicinc.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The wdt_set_timeout function lacked a complete kernel-doc
description. This patch adds missing parameter and return
value descriptions in accordance with kernel-doc standards.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Guenter Roeck <linux@roeckus.net>
Link: https://lore.kernel.org/r/20240206093857.62444-1-yang.lee@linux.alibaba.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_range()/ida_alloc_max() is inclusive. So a -1 has been added when
needed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/bc5b82db59ccac69f2612ba104e2f5100401a862.1705009009.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
granularity
Currently, congestion control algorithm is statically configured in
FW, and all QPs use the same algorithm(except UD which has a fixed
configuration of DCQCN). This is not flexible enough.
Support userspace configuring congestion control algorithm with QP
granularity while creating QPs. If the algorithm is not specified in
userspace, use the default one.
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240301104845.1141083-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
of_machine_compatible_match() works with a table of strings.
of_machine_is_compatible() is a simplier version with only one string.
Re-implement of_machine_is_compatible() by setting a table of strings
with a single string then using of_machine_compatible_match().
Suggested-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231214103152.12269-3-mpe@ellerman.id.au
|
|
of_machine_is_compatible() currently returns a positive integer if it
finds a match. However none of the callers ever check the value, they
all treat it as a true/false.
So change of_machine_is_compatible() to return bool, which will allow
the implementation to be changed in a subsequent patch.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231214103152.12269-2-mpe@ellerman.id.au
|
|
We have of_machine_is_compatible() to check if a machine is compatible
with a single compatible string. However some code is able to support
multiple compatible boards, and so wants to check for one of many
compatible strings.
So add of_machine_compatible_match() which takes a NULL terminated
array of compatible strings to check against the root node's
compatible property.
Compared to an open coded match this is slightly more self
documenting, and also avoids the caller needing to juggle the root
node either directly or via of_find_node_by_path().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231214103152.12269-1-mpe@ellerman.id.au
|
|
Previously driver got a few updates in order to replace OF APIs by
respective firmware node, however it was not finished to the logical
end, e.g., some APIs that has been used are still require OF node
to be passed. Finish that job by converting leftovers to use firmware
node APIs.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240302173401.217830-1-andy.shevchenko@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-02-29
We've added 119 non-merge commits during the last 32 day(s) which contain
a total of 150 files changed, 3589 insertions(+), 995 deletions(-).
The main changes are:
1) Extend the BPF verifier to enable static subprog calls in spin lock
critical sections, from Kumar Kartikeya Dwivedi.
2) Fix confusing and incorrect inference of PTR_TO_CTX argument type
in BPF global subprogs, from Andrii Nakryiko.
3) Larger batch of riscv BPF JIT improvements and enabling inlining
of the bpf_kptr_xchg() for RV64, from Pu Lehui.
4) Allow skeleton users to change the values of the fields in struct_ops
maps at runtime, from Kui-Feng Lee.
5) Extend the verifier's capabilities of tracking scalars when they
are spilled to stack, especially when the spill or fill is narrowing,
from Maxim Mikityanskiy & Eduard Zingerman.
6) Various BPF selftest improvements to fix errors under gcc BPF backend,
from Jose E. Marchesi.
7) Avoid module loading failure when the module trying to register
a struct_ops has its BTF section stripped, from Geliang Tang.
8) Annotate all kfuncs in .BTF_ids section which eventually allows
for automatic kfunc prototype generation from bpftool, from Daniel Xu.
9) Several updates to the instruction-set.rst IETF standardization
document, from Dave Thaler.
10) Shrink the size of struct bpf_map resp. bpf_array,
from Alexei Starovoitov.
11) Initial small subset of BPF verifier prepwork for sleepable bpf_timer,
from Benjamin Tissoires.
12) Fix bpftool to be more portable to musl libc by using POSIX's
basename(), from Arnaldo Carvalho de Melo.
13) Add libbpf support to gcc in CORE macro definitions,
from Cupertino Miranda.
14) Remove a duplicate type check in perf_event_bpf_event,
from Florian Lehner.
15) Fix bpf_spin_{un,}lock BPF helpers to actually annotate them
with notrace correctly, from Yonghong Song.
16) Replace the deprecated bpf_lpm_trie_key 0-length array with flexible
array to fix build warnings, from Kees Cook.
17) Fix resolve_btfids cross-compilation to non host-native endianness,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
selftests/bpf: Test if shadow types work correctly.
bpftool: Add an example for struct_ops map and shadow type.
bpftool: Generated shadow variables for struct_ops maps.
libbpf: Convert st_ops->data to shadow type.
libbpf: Set btf_value_type_id of struct bpf_map for struct_ops.
bpf: Replace bpf_lpm_trie_key 0-length array with flexible array
bpf, arm64: use bpf_prog_pack for memory management
arm64: patching: implement text_poke API
bpf, arm64: support exceptions
arm64: stacktrace: Implement arch_bpf_stack_walk() for the BPF JIT
bpf: add is_async_callback_calling_insn() helper
bpf: introduce in_sleepable() helper
bpf: allow more maps in sleepable bpf programs
selftests/bpf: Test case for lacking CFI stub functions.
bpf: Check cfi_stubs before registering a struct_ops type.
bpf: Clarify batch lookup/lookup_and_delete semantics
bpf, docs: specify which BPF_ABS and BPF_IND fields were zero
bpf, docs: Fix typos in instruction-set.rst
selftests/bpf: update tcp_custom_syncookie to use scalar packet offset
bpf: Shrink size of struct bpf_map/bpf_array.
...
====================
Link: https://lore.kernel.org/r/20240301001625.8800-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the hv_bus variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-hv-v1-1-521bd4140673@marliere.net
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240204-bus_cleanup-hv-v1-1-521bd4140673@marliere.net>
|
|
Maxcmd is mandatory for fabrics, check it early to identify the root
cause instead of waiting for it to propagate to "sqsize" and "allocing
queue".
By the way, change nvme_check_ctrl_fabric_info() to
nvmf_validate_identify_ctrl().
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
A new port configuration was added to set max_queue_size. Clamp user
configuration to RDMA transport limits.
Increase the maximal queue size of RDMA controllers from 128 to 256
(the default size stays 128 same as before).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Using this port configuration, one will be able to set the maximal queue
size to be used for any controller that will be associated to the
configured port.
The default value stayed 1024 but each transport will be able to set the
its own values before enabling the port.
Introduce lower limit of 16 for minimal queue depth (same as we use in
the host fabrics drivers).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
If a controller is configured with metadata support, clamp the maximal
queue size to be 128 since there are more resources that are needed
for metadata operations. Otherwise, clamp it to 256.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This definition will be used by controllers that are configured with
metadata support. For now, both regular and metadata controllers have
the same maximal queue size but later commit will increase the maximal
queue size for regular RDMA controllers to 256.
We'll keep the maximal queue size for metadata controllers to be 128
since there are more resources that are needed for metadata operations
and 128 is the optimal size found for metadata controllers base on
testing.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This is a preparation for setting the maximal queue size of a controller
that supports PI.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This is a preparation for having a dynamic configuration of max queue
size for a controller. Make sure that the maxcmd field stays the same as
the MQES (+1) value as we do today.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
According to the NVMe Spec:
"
MQES: This field indicates the maximum individual queue size that the
controller supports. For NVMe over PCIe implementations, this value
applies to the I/O Submission Queues and I/O Completion Queues that the
host creates. For NVMe over Fabrics implementations, this value applies
to only the I/O Submission Queues that the host creates.
"
Align the target code to compare mqes and sqsize as mentioned in the
NVMe Spec.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"A workaround to suppress the continuous bus resets in the case that
older devices are connected to the modern 1394 OHCI hardware and
devices
In IEEE 1394 Amendment (IEEE 1394a-2000), the short bus reset is added
to resolve the shortcomings of the long bus reset in IEEE 1394-1995.
However, it is well-known that the solution is not necessarily
effective in the mixing environment that both IEEE 1394-1995 PHY and
IEEE 1394a-2000 (or later) PHY exist, as described in section 8.4.6.2
of IEEE 1394a-2000.
The current implementation of firewire stack schedules the short bus
reset when attempting to resolve the mismatch of gap count in the
certain generation of bus topology. It can cause the continuous bus
reset in the issued environment.
The workaround simply uses the long bus reset instead of the short bus
reset. It is desirable to detect whether the issued environment or
not. However, the way to access PHY registers from remote note is
firstly defined in IEEE 1394a-2000, thus it is not available in the
case"
* tag 'firewire-fixes-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: use long bus reset on gap count error
|
|
This is the same issue that was fixed for the VGA text buffer in commit
39cdb68c64d8 ("vt: fix memory overlapping when deleting chars in the
buffer"). The cure is also the same i.e. replace memcpy() with memmove()
due to the overlaping buffers.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Fixes: 81732c3b2fed ("tty vt: Fix line garbage in virtual console on command line edition")
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/sn184on2-3p0q-0qrq-0218-895349s4753o@syhkavp.arg
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We accidently met the issue that the bash prompt is not shown after the
previous command done and until the next input if there's only one CPU
(In our issue other CPUs are isolated by isolcpus=). Further analysis
shows it's because the port entering runtime suspend even if there's
still pending chars in the buffer and the pending chars will only be
processed in next device resuming. We are using amba-pl011 and the
problematic flow is like below:
Bash kworker
tty_write()
file_tty_write()
n_tty_write()
uart_write()
__uart_start()
pm_runtime_get() // wakeup waker
queue_work()
pm_runtime_work()
rpm_resume()
status = RPM_RESUMING
serial_port_runtime_resume()
port->ops->start_tx()
pl011_tx_chars()
uart_write_wakeup()
[…]
__uart_start()
pm_runtime_get() < 0 // because runtime status = RPM_RESUMING
// later data are not commit to the port driver
status = RPM_ACTIVE
rpm_idle() -> rpm_suspend()
This patch tries to fix this by checking the port busy before entering
runtime suspending. A runtime_suspend callback is added for the port
driver. When entering runtime suspend the callback is invoked, if there's
still pending chars in the buffer then flush the buffer.
Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM")
Cc: stable <stable@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240226152351.40924-1-yangyicong@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When userspace opens the console, we call set_termios() passing a
termios with the console's configured baud rate. Currently this causes
dw8250_set_termios() to disable and then re-enable the UART clock at
the same frequency as it was originally. This can cause corruption
of any concurrent console output. Fix it by skipping the reclocking
if we are already at the correct rate.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Fixes: 4e26b134bd17 ("serial: 8250_dw: clock rate handling for all ACPI platforms")
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240222192635.1050502-1-pcc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When about to transmit the function imx_uart_start_tx is called and in
some RS485 configurations this function will call imx_uart_stop_rx. The
problem is that imx_uart_stop_rx will enable loopback in order to
release the RS485 bus, but when loopback is enabled transmitted data
will just be looped to RX.
This patch fixes the above problem by not enabling loopback when about
to transmit.
This driver now works well when used for RS485 half duplex master
configurations.
Fixes: 79d0224f6bf2 ("tty: serial: imx: Handle RS485 DE signal active high")
Cc: stable <stable@kernel.org>
Signed-off-by: Rickard x Andersson <rickaran@axis.com>
Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Link: https://lore.kernel.org/r/20240221115304.509811-1-rickaran@axis.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
