| Age | Commit message (Collapse) | Author |
|---|
|
While crossing a LUN boundary, it is probably safer (and clearer) to
keep all members of the continuous read structure aligned, including the
pause page (which is the last page of the lun or the last page of the
continuous read). Once these members properly in sync, we can use the
rawnand_cap_cont_reads() helper everywhere to "prepare" the next
continuous read if there is one.
Fixes: bbcd80f53a5e ("mtd: rawnand: Prevent crossing LUN boundaries during sequential reads")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240223115545.354541-4-miquel.raynal@bootlin.com
|
|
For LUN crossing boundaries, it is handy to know what is the index of
the last page in a LUN. This helper will soon be reused. At the same
time I rename page_per_lun to ppl in the calling function to clarify the
lines.
Cc: stable@vger.kernel.org # v6.7
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240223115545.354541-3-miquel.raynal@bootlin.com
|
|
We need to avoid the first page if we don't read it entirely.
We need to avoid the last page if we don't read it entirely.
While rather simple, this logic has been failed in the previous
fix. This time I wrote about 30 unit tests locally to check each
possible condition, hopefully I covered them all.
Reported-by: Christophe Kerello <christophe.kerello@foss.st.com>
Closes: https://lore.kernel.org/linux-mtd/20240221175327.42f7076d@xps-13/T/#m399bacb10db8f58f6b1f0149a1df867ec086bb0a
Suggested-by: Christophe Kerello <christophe.kerello@foss.st.com>
Fixes: 828f6df1bcba ("mtd: rawnand: Clarify conditions to enable continuous reads")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Christophe Kerello <christophe.kerello@foss.st.com>
Link: https://lore.kernel.org/linux-mtd/20240223115545.354541-2-miquel.raynal@bootlin.com
|
|
Remove the extraneous kernel-doc description for @nand_technology to
eliminate a kernel-doc warning:
nand_hynix.c:39: warning: Excess struct member 'nand_technology' description in 'hynix_nand'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240224014639.16145-1-rdunlap@infradead.org
|
|
The write protection feature is controlled by the module parameter wp_on
with default set to enabled. But not all the board use this feature
especially in BCMBCA broadband board. And module parameter is not
sufficient as different board can have different option. Add a device
tree property and allow this feature to be configured through the board
dts on per board basis.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Kamal Dasu <kamal.dasu@broadcom.com>
Reviewed-by: David Regan <dregan@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-14-william.zhang@broadcom.com
|
|
The BCMBCA broadband SoC integrates the NAND controller differently than
STB, iProc and other SoCs. It has different endianness for NAND cache
data.
Add a SoC read data bus shim for BCMBCA to meet the specific SoC need
and performance improvement using the optimized memcpy function on NAND
cache memory.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: David Regan <dregan@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-12-william.zhang@broadcom.com
|
|
In preparing to support multiple BCMBCA SoCs, rename bcm63138 to bcmbca
in the driver code and driver file name.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: David Regan <dregan@broadcom.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-11-william.zhang@broadcom.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The major features are support for LPA2 (52-bit VA/PA with 4K and 16K
pages), the dpISA extension and Rust enabled on arm64. The changes are
mostly contained within the usual arch/arm64/, drivers/perf, the arm64
Documentation and kselftests. The exception is the Rust support which
touches some generic build files.
Summary:
- Reorganise the arm64 kernel VA space and add support for LPA2 (at
stage 1, KVM stage 2 was merged earlier) - 52-bit VA/PA address
range with 4KB and 16KB pages
- Enable Rust on arm64
- Support for the 2023 dpISA extensions (data processing ISA), host
only
- arm64 perf updates:
- StarFive's StarLink (integrates one or more CPU cores with a
shared L3 memory system) PMU support
- Enable HiSilicon Erratum 162700402 quirk for HIP09
- Several updates for the HiSilicon PCIe PMU driver
- Arm CoreSight PMU support
- Convert all drivers under drivers/perf/ to use .remove_new()
- Miscellaneous:
- Don't enable workarounds for "rare" errata by default
- Clean up the DAIF flags handling for EL0 returns (in preparation
for NMI support)
- Kselftest update for ptrace()
- Update some of the sysreg field definitions
- Slight improvement in the code generation for inline asm I/O
accessors to permit offset addressing
- kretprobes: acquire regs via a BRK exception (previously done
via a trampoline handler)
- SVE/SME cleanups, comment updates
- Allow CALL_OPS+CC_OPTIMIZE_FOR_SIZE with clang (previously
disabled due to gcc silently ignoring -falign-functions=N)"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (134 commits)
Revert "mm: add arch hook to validate mmap() prot flags"
Revert "arm64: mm: add support for WXN memory translation attribute"
Revert "ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512"
ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512
kselftest/arm64: Add 2023 DPISA hwcap test coverage
kselftest/arm64: Add basic FPMR test
kselftest/arm64: Handle FPMR context in generic signal frame parser
arm64/hwcap: Define hwcaps for 2023 DPISA features
arm64/ptrace: Expose FPMR via ptrace
arm64/signal: Add FPMR signal handling
arm64/fpsimd: Support FEAT_FPMR
arm64/fpsimd: Enable host kernel access to FPMR
arm64/cpufeature: Hook new identification registers up to cpufeature
docs: perf: Fix build warning of hisi-pcie-pmu.rst
perf: starfive: Only allow COMPILE_TEST for 64-bit architectures
MAINTAINERS: Add entry for StarFive StarLink PMU
docs: perf: Add description for StarFive's StarLink PMU
dt-bindings: perf: starfive: Add JH8100 StarLink PMU
perf: starfive: Add StarLink PMU support
docs: perf: Update usage for target filter of hisi-pcie-pmu
...
|
|
Doing a XE_EXEC with num_batch_buffer == 0 makes signals passed as
argument to be signaled when the last real XE_EXEC is completed.
But to do that it was first pinning all VMAs in drm_gpuvm_exec_lock(),
this patch remove this pinning as it is not required.
This change also help Mesa implementing memory over-commiting recovery
as it needs to unbind not needed VMAs when the whole VM can't fit
in GPU memory but it can only do the unbiding when the last XE_EXEC
is completed.
So with this change Mesa can get the signal it want without getting
out-of-memory errors.
Fixes: eb9702ad2986 ("drm/xe: Allow num_batch_buffer / num_binds == 0 in IOCTLs")
Cc: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313171318.121066-1-jose.souza@intel.com
(cherry picked from commit 58480c1c912ff8146d067301a0d04cca318b4a66)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Return after warning regarding kobj creation failure.
Fixes: 4ae3aeab32d7 ("drm/xe: Add vram frequency sysfs attributes")
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313150545.2830408-2-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 989d07ac6bb7d269e975f85e8f683f496faa0380)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Rather than return an error to the user or ban the VM when userptr VMA
page pin fails with -EFAULT, invalidate VMA mappings. This supports the
UMD use case of freeing userptr while still having bindings.
Now that non-faulting VMs can invalidate VMAs, drop the usm prefix for
the tile_invalidated member.
v2:
- Fix build error (CI)
v3:
- Don't invalidate VMA if in fault mode, rather kill VM (Thomas)
- Update commit message with tile_invalidated name chagne (Thomas)
- Wait VM bookkeep slots with VM resv lock (Thomas)
v4:
- Move list_del_init(&userptr.repin_link) after error check (Thomas)
- Assert not in fault mode (Matthew)
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312183907.933835-1-matthew.brost@intel.com
(cherry picked from commit 521db22a1d70dbc596a07544a738416025b1b63c)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Add the parse of format command's lbafu to calculate lbaf.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add detailed parsing of reservation commands to make the trace log
more consistent and human-readable.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Parse zone mgmt send commands's zsa and receive command's
zrasf to string to make the trace log more human-readable.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Use nvme_disk_is_ns_head helper instead of check fops directly,
and also drop CONFIG_NVME_MULTIPATH check.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
We found a issue on production environment while using NVMe over RDMA,
admin_q reconnect failed forever while remote target and network is ok.
After dig into it, we found it may caused by a ABBA deadlock due to tag
allocation. In my case, the tag was hold by a keep alive request
waiting inside admin_q, as we quiesced admin_q while reset ctrl, so the
request maked as idle and will not process before reset success. As
fabric_q shares tagset with admin_q, while reconnect remote target, we
need a tag for connect command, but the only one reserved tag was held
by keep alive command which waiting inside admin_q. As a result, we
failed to reconnect admin_q forever. In order to fix this issue, I
think we should keep two reserved tags for admin queue.
Fixes: ed01fee283a0 ("nvme-fabrics: only reserve a single tag")
Signed-off-by: Chunguang Xu <chunguang.xu@shopee.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This was a relatively calm development cycle. Most of changes are
rather small device-specific fixes and enhancements. The only
significant changes in ALSA core are code refactoring with the recent
cleanup infrastructure, which should bring no functionality changes.
Some highlights below:
Core:
- Lots of cleanups in ALSA core code with automatic kfree cleanup and
locking guard macros
- New ALSA core kunit test
ASoC:
- SoundWire support for AMD ACP 6.3 systems
- Support for reporting version information for AVS firmware
- Support DSPless mode for Intel Soundwire systems
- Support for configuring CS35L56 amplifiers using EFI calibration
data
- Log which component is being operated on as part of power
management trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
HD- and USB-audio:
- More Cirrus HD-audio codec support
- TAS2781 HD-audio codec fixes
- Scarlett2 mixer fixes
Others:
- Enhancement of virtio driver for audio control supports
- Cleanups of legacy PM code with new macros
- Firewire sound updates"
* tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (307 commits)
ALSA: usb-audio: Stop parsing channels bits when all channels are found.
ALSA: hda/tas2781: remove unnecessary runtime_pm calls
ALSA: hda/realtek - ALC236 fix volume mute & mic mute LED on some HP models
ALSA: aaci: Delete unused variable in aaci_do_suspend
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range again
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range
ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values
ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection
ALSA: hda/tas2781: restore power state after system_resume
ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend
ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend
ALSA: hda/tas2781: add lock to system_suspend
ALSA: hda/tas2781: use dev_dbg in system_resume
ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops
platform/x86: serial-multi-instantiate: Add support for CS35L54 and CS35L57
ALSA: hda: cs35l56: Add support for CS35L54 and CS35L57
ASoC: cs35l56: Add support for CS35L54 and CS35L57
ASoC: Intel: catpt: Carefully use PCI bitwise constants
ALSA: hda: hda_component: Include sound/hda_codec.h
ALSA: hda: hda_component: Add missing #include guards
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Consolidate interrupt related code in irq.c (Ilpo Järvinen)
- Reduce kernel size by replacing sysfs resource macros with
functions (Ilpo Järvinen)
- Reduce kernel size by compiling sysfs support only when
CONFIG_SYSFS=y (Lukas Wunner)
- Avoid using Extended Tags on 3ware-9650SE Root Port to work around
an apparent hardware defect (Jörg Wedekind)
Resource management:
- Fix an MMIO mapping leak in pci_iounmap() (Philipp Stanner)
- Move pci_iomap.c and other PCI-specific devres code to drivers/pci
(Philipp Stanner)
- Consolidate PCI devres code in devres.c (Philipp Stanner)
Power management:
- Avoid D3cold on Asus B1400 PCI-NVMe bridge, where firmware doesn't
know how to return correctly to D0, and remove previous quirk that
wasn't as specific (Daniel Drake)
- Allow runtime PM when the driver enables it but doesn't need any
runtime PM callbacks (Raag Jadav)
- Drain runtime-idle callbacks before driver removal to avoid races
between .remove() and .runtime_idle(), which caused intermittent
page faults when the rtsx .runtime_idle() accessed registers that
its .remove() had already unmapped (Rafael J. Wysocki)
Virtualization:
- Avoid Secondary Bus Reset on LSI FW643 so it can be assigned to VMs
with VFIO, e.g., for professional audio software on many Apple
machines, at the cost of leaking state between VMs (Edmund Raile)
Error handling:
- Print all logged TLP Prefixes, not just the first, after AER or DPC
errors (Ilpo Järvinen)
- Quirk the DPC PIO log size for Intel Raptor Lake Root Ports, which
still don't advertise a legal size (Paul Menzel)
- Ignore expected DPC Surprise Down errors on hot removal (Smita
Koralahalli)
- Block runtime suspend while handling AER errors to avoid races that
prevent the device form being resumed from D3hot (Stanislaw
Gruszka)
Peer-to-peer DMA:
- Use atomic XA allocation in RCU read section (Christophe JAILLET)
ASPM:
- Collect bits of ASPM-related code that we need even without
CONFIG_PCIEASPM into aspm.c (David E. Box)
- Save/restore L1 PM Substates config for suspend/resume (David E.
Box)
- Update save_save when ASPM config is changed, so a .slot_reset()
during error recovery restores the changed config, not the
.probe()-time config (Vidya Sagar)
Endpoint framework:
- Refactor and improve pci_epf_alloc_space() API (Niklas Cassel)
- Clean up endpoint BAR descriptions (Niklas Cassel)
- Fix ntb_register_device() name leak in error path (Yang Yingliang)
- Return actual error code for pci_vntb_probe() failure (Yang
Yingliang)
Broadcom STB PCIe controller driver:
- Fix MDIO write polling, which previously never waited for
completion (Jonathan Bell)
Cadence PCIe endpoint driver:
- Clear the ARI "Next Function Number" of last function (Jasko-EXT
Wojciech)
Freescale i.MX6 PCIe controller driver:
- Simplify by replacing switch statements with function pointers for
different hardware variants (Frank Li)
- Simplify by using clk_bulk*() API (Frank Li)
- Remove redundant DT clock and reg/reg-name details (Frank Li)
- Add i.MX95 DT and driver support for both Root Complex and Endpoint
mode (Frank Li)
Microsoft Hyper-V host bridge driver:
- Reduce memory usage by limiting ring buffer size to 16KB instead of
4 pages (Michael Kelley)
Qualcomm PCIe controller driver:
- Add X1E80100 DT and driver support (Abel Vesa)
- Add DT 'required-opps' for SoCs that require a minimum performance
level (Johan Hovold)
- Make DT 'msi-map-mask' optional, depending on how MSI interrupts
are mapped (Johan Hovold)
- Disable ASPM L0s for sc8280xp, sa8540p and sa8295p because the PHY
configuration isn't tuned correctly for L0s (Johan Hovold)
- Split dt-binding qcom,pcie.yaml into qcom,pcie-common.yaml and
separate files for SA8775p, SC7280, SC8180X, SC8280XP, SM8150,
SM8250, SM8350, SM8450, SM8550 for easier reviewing (Krzysztof
Kozlowski)
- Enable BDF to SID translation by disabling bypass mode (Manivannan
Sadhasivam)
- Add endpoint MHI support for Snapdragon SA8775P SoC (Mrinmay
Sarkar)
Synopsys DesignWare PCIe controller driver:
- Allocate 64-bit MSI address if no 32-bit address is available (Ajay
Agarwal)
- Fix endpoint Resizable BAR to actually advertise the required 1MB
size (Niklas Cassel)
MicroSemi Switchtec management driver:
- Release resources if the .probe() fails (Christophe JAILLET)
Miscellaneous:
- Make pcie_port_bus_type const (Ricardo B. Marliere)"
* tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (77 commits)
PCI/ASPM: Update save_state when configuration changes
PCI/ASPM: Disable L1 before configuring L1 Substates
PCI/ASPM: Call pci_save_ltr_state() from pci_save_pcie_state()
PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
PCI: hv: Fix ring buffer size calculation
PCI: dwc: endpoint: Fix advertised resizable BAR size
PCI: cadence: Clear the ARI Capability Next Function Number of the last function
PCI: dwc: Strengthen the MSI address allocation logic
PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling
PCI: qcom: Add X1E80100 PCIe support
dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller
PCI: qcom: Enable BDF to SID translation properly
PCI/AER: Generalize TLP Header Log reading
PCI/AER: Use explicit register size for PCI_ERR_CAP
PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p
dt-bindings: PCI: qcom: Do not require 'msi-map-mask'
dt-bindings: PCI: qcom: Allow 'required-opps'
PCI/AER: Block runtime suspend when handling errors
PCI/ASPM: Move pci_save_ltr_state() to aspm.c
PCI/ASPM: Always build aspm.c
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- New acer-wmi HW support
- Support for new revision of amd/pmf heartbeat notify
- Correctly handle asus-wmi HW without LEDs
- fujitsu-laptop battery charge control support
- Support for new hp-wmi thermal profiles
- Support ideapad-laptop refresh rate key
- Put intel/pmc AI accelerator (GNA) into D3 if it has no driver to
allow entry into low-power modes, and temporarily removed Lunar Lake
SSRAM support due to breaking FW changes causing probe fail (further
breaking FW changes are still pending)
- Report pmc/punit_atom devices that prevent reacing low power levels
- Surface Fan speed function support
- Support for more sperial keys and complete the list of models with
non-standard fan registers in thinkpad_acpi
- New DMI touchscreen HW support
- Continued modernization efforts of wmi
- Removal of obsoleted ledtrig-audio call and the related dependency
- Debug & metrics interface improvements
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (87 commits)
platform/x86/intel/pmc: Improve PKGC residency counters debug
platform/x86: asus-wmi: Consider device is absent when the read is ~0
Documentation/x86/amd/hsmp: Updating urls
platform/mellanox: mlxreg-hotplug: Remove redundant NULL-check
platform/x86/amd/pmf: Update sps power thermals according to the platform-profiles
platform/x86/amd/pmf: Add support to get sps default APTS index values
platform/x86/amd/pmf: Add support to get APTS index numbers for static slider
platform/x86/amd/pmf: Add support to notify sbios heart beat event
platform/x86/amd/pmf: Add support to get sbios requests in PMF driver
platform/x86/amd/pmf: Disable debugfs support for querying power thermals
platform/x86/amd/pmf: Differentiate PMF ACPI versions
x86/platform/atom: Check state of Punit managed devices on s2idle
platform/x86: pmc_atom: Check state of PMC clocks on s2idle
platform/x86: pmc_atom: Check state of PMC managed devices on s2idle
platform/x86: pmc_atom: Annotate d3_sts register bit defines
clk: x86: Move clk-pmc-atom register defines to include/linux/platform_data/x86/pmc_atom.h
platform/x86: make fw_attr_class constant
platform/x86/intel/tpmi: Change vsec offset to u64
platform/x86: intel_scu_pcidrv: Remove unused intel-mid.h
platform/x86: intel_scu_wdt: Remove unused intel-mid.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Framework:
- Introduce ExpressWire library
New Drivers:
- Add support for ON Semiconductor NCP5623 RGB LED Driver
New Device Support:
- Add support for PM660L to Qualcomm's LPG driver
New Functionality:
- Dynamically load modules required for the default-trigger
- Add some support for suspend and resume
- Allow LEDs to remain lit during suspend
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Fix include lists; alphabetise, remove unused, explicitly add used
- Add new led_match_default_trigger to avoid duplication
- Add module alias' to aid auto-loading
- Default to hw_control if no others are specified
- De-bloat the supported link speed attribute lists
- Remove superfluous code and simplify overall
- Constify some variables
Bug Fixes:
- Prevent kernel panic when renaming the net interface
- Fix Kconfig related build errors
- Ensure mutexes are unlocked prior to destroying them
- Provide clean-up between state changes to avoid invalid state
- Fix some broken kernel-doc headers"
* tag 'leds-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (41 commits)
leds: ncp5623: Add MS suffix to time defines
leds: Add NCP5623 multi-led driver
dt-bindings: leds: Add NCP5623 multi-LED Controller
leds: mlxreg: Drop an excess struct mlxreg_led_data member
leds: leds-mlxcpld: Fix struct mlxcpld_led_priv member name
leds: lm3601x: Fix struct lm3601_led kernel-doc warnings
leds: Fix ifdef check for gpio_led_register_device()
dt-bindings: leds: qcom-lpg: Narrow nvmem for other variants
dt-bindings: leds: qcom-lpg: Drop redundant qcom,pm8550-pwm in if:then:
dt-bindings: leds: Add LED_FUNCTION_WAN_ONLINE for Internet access
leds: sgm3140: Add missing timer cleanup and flash gpio control
leds: expresswire: Don't depend on NEW_LEDS
Revert "leds: Only descend into leds directory when CONFIG_NEW_LEDS is set"
leds: aw2013: Unlock mutex before destroying it
leds: qcom-lpg: Add QCOM_PBS dependency
leds: rgb: leds-group-multicolor: Allow LEDs to stay on in suspend
leds: trigger: netdev: Fix kernel panic on interface rename trig notify
leds: qcom-lpg: Add PM660L configuration and compatible
leds: spi-byte: Use devm_led_classdev_register_ext()
leds: pca963x: Add support for suspend and resume
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Drivers:
- Add support for Kinetic KTD2801 Backlight
Fix-ups:
- Fix include lists; alphabetise, remove unused, explicitly add used
- Device Tree binding adaptions/conversions/creation
- Use dev_err_probe() to clean-up error paths
- Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations
Bug Fixes:
- Fix changes of NULL pointer dereference
- Remedy a bunch of logic errors
- Initialise (zero) Backlight properties data structures"
* tag 'backlight-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (32 commits)
backlight: pandora_bl: Drop unneeded ENOMEM error message
backlight: lm3630a_bl: Simplify probe return on gpio request error
backlight: lm3630a_bl: Handle deferred probe
backlight: as3711_bl: Handle deferred probe
backlight: bd6107: Handle deferred probe
backlight: l4f00242t03: Simplify with dev_err_probe()
backlight: gpio: Simplify with dev_err_probe()
backlight: lp8788: Fully initialize backlight_properties during probe
backlight: lm3639: Fully initialize backlight_properties during probe
backlight: da9052: Fully initialize backlight_properties during probe
backlight: lm3630a: Use backlight_get_brightness helper in update_status
backlight: lm3630a: Don't set bl->props.brightness in get_brightness
backlight: lm3630a: Initialize backlight_properties on init
backlight: mp3309c: Fully initialize backlight_properties during probe
backlight: mp3309c: Utilise temporary variable for struct device
backlight: mp3309c: Use dev_err_probe() instead of dev_err()
backlight: mp3309c: Make use of device properties
dt-bindings: backlight: qcom-wled: Fix bouncing email addresses
backlight: hx8357: Utilise temporary variable for struct device
backlight: hx8357: Make use of dev_err_probe()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Device Support:
- Add support for Watchdog to ChromeOS Embedded Controller
- Add support for GPIOs to ChromeOS Embedded Controller
- Add supprt for Sound to MediaTek MT6357 CODEC
New Functionality:
- Add power-off functionality to Texas Instruments TWL series CODECs
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
- Trivial; spelling, whitespace, clean-ups, etc
- Remove superfluous code and simplify overall
- Fix include lists; alphabetise, remove unused, explicitly add used
- Use dev_err_probe() to clean-up error paths
- Convert used cache type over to the Maple Tree in many instances
- Constify a bunch of static structs
- Refrain from over-riding resources provided via the firmware
Bug Fixes:
- Fix a clock related firmware bug on Dell XPS 9530 et al.
- Repair incorrect IRQ designations
- Increase buffer sizes to omit various snprintf compiler errors
- Ensure errors are handled properly
- Balance references and prevent resource leaks
- Rectify Power Key interrupt processing
- Fix Kconfig related build errors
- Correct a bunch of register start-up default values"
* tag 'mfd-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits)
mfd: cs42l43: Fix wrong GPIO_FN_SEL and SPI_CLK_CONFIG1 defaults
mfd: cs42l43: Fix wrong register defaults
mfd: mt6397-core: Register mt6357 sound codec
dt-bindings: mfd: syscon: Add ti,am62-usb-phy-ctrl compatible
dt-bindings: mfd: dlg,da9063: Make #interrupt-cells required
dt-bindings: mfd: Convert atmel-flexcom to json-schema
mfd: kempld-core: Don't replace resources provided by ACPI
mfd: cros_ec_dev: Add GPIO device if feature present on EC
dt-bindings: mfd: cros-ec: Add properties for GPIO controller
mfd: twl: Select MFD_CORE
mfd: core: Constify the struct device_type usage
mfd: rk8xx-core: Fix interrupt processing order for power key button
mfd: twl4030-power: Accept standard property for power controller
mfd: twl-core: Add power off implementation for twl603x
dt-bindings: mfd: ti,twl: Document system-power-controller
mfd: altera-sysmgr: Call of_node_put() only when of_parse_phandle() takes a ref
mfd: syscon: Remove extern from function prototypes
mfd: syscon: Call of_node_put() only when of_parse_phandle() takes a ref
mfd: mc13xxx: Use bitfield helpers
mfd: rc5t583: Convert to use maple tree register cache
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time around.
New drivers:
- New driver for Renesas R8A779H0 also known as R-Car V4M.
- New driver for the Awinic AW9523/B I2C GPIO expander. I found this
living out-of-tree in OpenWrt as an upstream attempt had stalled on
the finishing line, so I picked it up and finished the job.
Improvements:
- The Nomadik pin control driver was for years re-used out of tree
for the ST STA chips, and now the IP was re-used in a MIPS
automotive SoC called MobilEyeq5, so it has been split in pin
control and GPIO drivers so the latter can be reused by MobilEyeq5.
(Along with a long list of cleanups)
- A lot of overall cleanup and tidying up"
* tag 'pinctrl-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (87 commits)
drivers/gpio/nomadik: move dummy nmk_gpio_dbg_show_one() to header
gpio: nomadik: remove BUG_ON() in nmk_gpio_populate_chip()
dt-bindings: pinctrl: qcom: update compatible name for match with driver
pinctrl: aw9523: Make the driver tristate
pinctrl: nomadik: fix dereference of error pointer
gpio: nomadik: Back out some managed resources
pinctrl: aw9523: Add proper terminator
pinctrl: core: comment that pinctrl_add_gpio_range() is deprecated
pinctrl: pinmux: Suppress error message for -EPROBE_DEFER
pinctrl: Add driver for Awinic AW9523/B I2C GPIO Expander
dt-bindings: pinctrl: Add bindings for Awinic AW9523/AW9523B
gpio: nomadik: Finish conversion to use firmware node APIs
gpio: nomadik: fix Kconfig dependencies inbetween pinctrl & GPIO
pinctrl: da9062: Add OF table
dt-bindings: pinctrl: at91: add sam9x7
pinctrl: ocelot: remove redundant assignment to variable ret
gpio: nomadik: grab optional reset control and deassert it at probe
gpio: nomadik: support mobileye,eyeq5-gpio
gpio: nomadik: handle variadic GPIO count
gpio: nomadik: support shared GPIO IRQs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"New features:
- axp20x_usb_power: report USB type
Cleanups:
- convert lots of drivers to use devm_power_supply_register()
- convert lots of reset drivers to use devm_register_sys_off_handler()
- constify device_type and power_supply_class
- axp20x_usb_power: use correct property to report input current limit
- mm8013: correct handling of "not charging" status register
- core: fix charge_behaviour formatting
- minor fixes cleanups"
* tag 'for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (66 commits)
power: supply: core: fix charge_behaviour formatting
power: supply: core: ease special formatting implementations
power: supply: mm8013: fix "not charging" detection
power: supply: move power_supply_attr_groups definition back to sysfs
power: supply: core: simplify power_supply_class_init
power: supply: core: add power_supply_for_each_device()
power: supply: core: make power_supply_class constant
power: supply: bq2415x_charger: report online status
power: supply: core: move power_supply_attr_group into #ifdef block
power: supply: core: Fix power_supply_init_attrs() stub
power: supply: bq27xxx: Report charge full state correctly
power: reset: rmobile-reset: Make sysc_base2 local
power: supply: core: constify the struct device_type usage
power: supply: axp288_fuel_gauge: Deny ROCK Pi X
power: reset: rmobile-reset: Map correct MMIO resource
power: reset: xgene-reboot: Fix a NULL vs IS_ERR() test
power: supply: axp288_fuel_gauge: Add STCK1A* Intel Compute Sticks to the deny-list
power: reset: syscon-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
power: reset: syscon-poweroff: Move device data into a struct
power: reset: restart-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HSI updates from Sebastian Reichel:
- fix kernel-doc warning
- make hsi_bus_type const
[ And as always I had to remind myself about the acronyn, so to avoid
that for others: "HSI" is High Speed Synchronous Serial Interface,
because of course it is. - Linus ]
* tag 'hsi-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: ssi_protocol: fix struct members kernel-doc warnings
hsi: hsi_core: make hsi_bus_type const
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- support for the following Bluetooth devices from Samsung: Samsung
wireless {Keyboard, GamePad, Action Mouse, Book Cover, Universal
Keyboard, HOGP Keyboard} (Sandeep C S)
- second version of code for applying proper quirk depending on
firmware version for lenovo/cptkbd (Mikhail Khvainitski)
- lenovo/cptkbd firmware-dependent quirk (Mikhail Khvainitski)
- assorted fixes and optimizations for amd-sfh (Basavaraj Natikar)
- dead code and dead data structures removal (Jiri Slaby, Jiapeng
Chong)
* tag 'hid-for-linus-2024031301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (25 commits)
HID: amd_sfh: Set the AMD SFH driver to depend on x86
HID: input: avoid polling stylus battery on Chromebook Pompom
HID: amd_sfh: Extend MP2 register access to SFH
HID: amd_sfh: Improve boot time when SFH is available
HID: amd_sfh: Avoid disabling the interrupt
HID: amd_sfh: Update HPD sensor structure elements
HID: amd_sfh: Increase sensor command timeout
HID: intel-ish-hid: ipc: Add Arrow Lake PCI device ID
HID: nintendo: Remove some unused functions
HID: hid-prodikeys: remove struct pk_device
HID: hid-prodikeys: remove unused struct pcmidi_snd members
HID: hid-multitouch: remove unused mt_application::dev_time
HID: hid-lg3ff: remove unused struct lg3ff_device
HID: protect hid_device::bpf by CONFIG_HID_BPF
HID: wacom: remove unused hid_data::pressure
HID: apple: remove unused members from struct apple_sc_backlight
HID: wacom: Clean up use of struct->wacom_wac
HID: samsung: Add Samsung wireless bookcover and universal keyboard support
HID: samsung: Add Samsung wireless action mouse support
HID: samsung: Add Samsung wireless gamepad support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay
Pull auxdisplay updates from Andy Shevchenko:
- New driver for GPIO based 7-segment LED display (Chris Packham)
- New driver for Maxim MAX6958/6959 I²C 7-segment LED display
controller
- Refactor linedisp library to make the above happen
- Update Holtek HT16k33 driver to follow the linedisp refactoring
- Convert .remove to return void in platform drivers (Uwe Kleine-König)
- Fix DT schemas (Krzysztof Kozlowski)
- Refresh MAINTAINERS database
* tag 'auxdisplay-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay: (27 commits)
auxdisplay: img-ascii-lcd: Convert to platform remove callback returning void
auxdisplay: hd44780: Convert to platform remove callback returning void
auxdisplay: cfag12864bfb: Convert to platform remove callback returning void
auxdisplay: seg-led-gpio: Import linedisp namespace
dt-bindings: auxdisplay: Add bindings for generic 7-segment LED
auxdisplay: Add 7-segment LED display driver
auxdisplay: Add driver for MAX695x 7-segment LED controllers
dt-bindings: auxdisplay: Add Maxim MAX6958/6959
auxdisplay: ht16k33: Drop struct ht16k33_seg
auxdisplay: ht16k33: Switch to use line display character mapping
auxdisplay: ht16k33: Define a few helper macros
auxdisplay: ht16k33: Move ht16k33_linedisp_ops down
auxdisplay: ht16k33: Add default to switch-cases
auxdisplay: linedisp: Allocate buffer for the string
auxdisplay: linedisp: Add support for overriding character mapping
auxdisplay: linedisp: Provide struct linedisp_ops for future extension
auxdisplay: linedisp: Move exported symbols to a namespace
auxdisplay: linedisp: Add missing header(s)
auxdisplay: linedisp: Unshadow error codes in ->store()
auxdisplay: linedisp: Use unique number for id
...
|
|
After commit cff49d58f57e ("spi: Unify error codes by replacing -ENOTSUPP with
-EOPNOTSUPP"), our SPI NOR flashes would stop probing with the following
visible in the kernel log:
[ 2.196300] brcmstb_qspi f0440920.qspi: using bspi-mspi mode
[ 2.210295] spi-nor: probe of spi1.0 failed with error -95
It turns out that the check in spi_mem_exec_op() was changed to check
for -ENOTSUPP (old error code) or -EOPNOTSUPP (new error code), but this
means that for drivers that were converted, the second condition is now
true, and we stop falling through like we used to. Fix the error to
check for neither error being neither -ENOTSUPP *nor* -EOPNOTSUPP.
Fixes: cff49d58f57e ("spi: Unify error codes by replacing -ENOTSUPP with -EOPNOTSUPP")
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240313194530.3150446-1-florian.fainelli@broadcom.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
txgbe register clk which name is i2c_designware.pci_dev_id(),
clk_name will be stored in clk_lookup_alloc. If PCIe bus number
is larger than 0x39, clk_name size will be larger than 20 bytes.
It exceeds clk_lookup_alloc MAX_DEV_ID limits. So the driver
shortened clk_name.
Fixes: b63f20485e43 ("net: txgbe: Register fixed rate clock")
Signed-off-by: Duanqiang Wen <duanqiangwen@net-swift.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/r/20240313080634.459523-1-duanqiangwen@net-swift.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 358e76fd613a ("drm/sun4i: hdmi: Consolidate atomic_check and
mode_valid") changed the clock rate from an unsigned long to an unsigned
long long resulting in a a 64-bit division that might not be supported
on all platforms.
The resulted in compilation being broken at least for m68k, xtensa and
some arm configurations, at least.
Fixes: 358e76fd613a ("drm/sun4i: hdmi: Consolidate atomic_check and mode_valid")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/r/CA+G9fYvG9KE15PGNoLu+SBVyShe+u5HBLQ81+kK9Zop6u=ywmw@mail.gmail.com/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403011839.KLiXh4wC-lkp@intel.com/
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20240304091225.366325-1-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Use rbi->len instead of rcd->len for non-dataring packet.
Found issue:
XDP_WARN: xdp_update_frame_from_buff(line:278): Driver BUG: missing reserved tailroom
WARNING: CPU: 0 PID: 0 at net/core/xdp.c:586 xdp_warn+0xf/0x20
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W O 6.5.1 #1
RIP: 0010:xdp_warn+0xf/0x20
...
? xdp_warn+0xf/0x20
xdp_do_redirect+0x15f/0x1c0
vmxnet3_run_xdp+0x17a/0x400 [vmxnet3]
vmxnet3_process_xdp+0xe4/0x760 [vmxnet3]
? vmxnet3_tq_tx_complete.isra.0+0x21e/0x2c0 [vmxnet3]
vmxnet3_rq_rx_complete+0x7ad/0x1120 [vmxnet3]
vmxnet3_poll_rx_only+0x2d/0xa0 [vmxnet3]
__napi_poll+0x20/0x180
net_rx_action+0x177/0x390
Reported-by: Martin Zaharinov <micron10@gmail.com>
Tested-by: Martin Zaharinov <micron10@gmail.com>
Link: https://lore.kernel.org/netdev/74BF3CC8-2A3A-44FF-98C2-1E20F110A92E@gmail.com/
Fixes: 54f00cce1178 ("vmxnet3: Add XDP support.")
Signed-off-by: William Tu <witu@nvidia.com>
Link: https://lore.kernel.org/r/20240309183147.28222-1-witu@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pull drm updates from Dave Airlie:
"Highlights are usual, more AMD IP blocks for future hw, i915/xe
changes, Displayport tunnelling support for i915, msm YUV over DP
changes, new tests for ttm, but its mostly a lot of stuff all over the
place from lots of people.
core:
- EDID cleanups
- scheduler error handling fixes
- managed: add drmm_release_action() with tests
- add ratelimited drm debug print
- DPCD PSR early transport macro
- DP tunneling and bandwidth allocation helpers
- remove built-in edids
- dp: Avoid AUX transfers on powered-down displays
- dp: Add VSC SDP helpers
cross drivers:
- use new drm print helpers
- switch to ->read_edid callback
- gem: add stats for shared buffers plus updates to amdgpu, i915, xe
syncobj:
- fixes to waiting and sleeping
ttm:
- add tests
- fix errno codes
- simply busy-placement handling
- fix page decryption
media:
- tc358743: fix v4l device registration
video:
- move all kernel parameters for video behind CONFIG_VIDEO
sound:
- remove <drm/drm_edid.h> include from header
ci:
- add tests for msm
- fix apq8016 runner
efifb:
- use copy of global screen_info state
vesafb:
- use copy of global screen_info state
simplefb:
- fix logging
bridge:
- ite-6505: fix DP link-training bug
- samsung-dsim: fix error checking in probe
- samsung-dsim: add bsh-smm-s2/pro boards
- tc358767: fix regmap usage
- imx: add i.MX8MP HDMI PVI plus DT bindings
- imx: add i.MX8MP HDMI TX plus DT bindings
- sii902x: fix probing and unregistration
- tc358767: limit pixel PLL input range
- switch to new drm_bridge_read_edid() interface
panel:
- ltk050h3146w: error-handling fixes
- panel-edp: support delay between power-on and enable; use put_sync
in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49
V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
- panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
- panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
- add BOE TH101MB31IG002-28A plus DT bindings
- add EDT ETML1010G3DRA plus DT bindings
- add Novatek NT36672E LCD DSI plus DT bindings
- nt36523: support 120Hz timings, fix includes
- simple: fix display timings on RK32FN48H
- visionox-vtdr6130: fix initialization
- add Powkiddy RGB10MAX3 plus DT bindings
- st7703: support panel rotation plus DT bindings
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
panel-orientation-quirks:
- GPD Win Mini
amdgpu:
- Validate DMABuf imports in compute VMs
- Add RAS ACA framework
- PSP 13 fixes
- Misc code cleanups
- Replay fixes
- Atom interpretor PS, WS bounds checking
- DML2 fixes
- Audio fixes
- DCN 3.5 Z state fixes
- Remove deprecated ida_simple usage
- UBSAN fixes
- RAS fixes
- Enable seq64 infrastructure
- DC color block enablement
- Documentation updates
- DC documentation updates
- DMCUB updates
- ATHUB 4.1 support
- LSDMA 7.0 support
- JPEG DPG support
- IH 7.0 support
- HDP 7.0 support
- VCN 5.0 support
- SMU 13.0.6 updates
- NBIO 7.11 updates
- SDMA 6.1 updates
- MMHUB 3.3 updates
- DCN 3.5.1 support
- NBIF 6.3.1 support
- VPE 6.1.1 support
amdkfd:
- Validate DMABuf imports in compute VMs
- SVM fixes
- Trap handler updates and enhancements
- Fix cache size reporting
- Relocate the trap handler
radeon:
- Atom interpretor PS, WS bounds checking
- Misc code cleanups
xe:
- new query for GuC submission version
- Remove unused persistent exec_queues
- Add vram frequency sysfs attributes
- Add the flag XE_VM_BIND_FLAG_DUMPABLE
- Drop pre-production workarounds
- Drop kunit tests for unsupported platforms
- Start pumbling SR-IOV support with memory based interrupts for VF
- Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC
to work with memory based interrupts
- Add GuC Doorbells Manager as prep work SR-IOV
- Implement additional workarounds for xe2 and MTL
- Program a few registers according to perfomance guide spec for Xe2
- Fix remaining 32b build issues and enable it back
- Fix build with CONFIG_DEBUG_FS=n
- Fix warnings from GuC ABI headers
- Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF
- Release mmap mappings on rpm suspend
- Disable mid-thread preemption when not properly supported by
hardware
- Fix xe_exec by reserving extra fence slot for CPU bind
- Fix xe_exec with full long running exec queue
- Canonicalize addresses where needed for Xe2 and add to devcoredum
- Toggle USM support for Xe2
- Only allow 1 ufence per exec / bind IOCTL
- Add GuC firmware loading for Lunar Lake
- Add XE_VMA_PTE_64K VMA flag
i915:
- Add more ADL-N PCI IDs
- Enable fastboot also on older platforms
- Early transport for panel replay and PSR
- New ARL PCI IDs
- DP TPS4 PHY test pattern support
- Unify and improve VSC SDP for PSR and non-PSR cases
- Refactor memory regions and improve debug logging
- Rework global state serialization
- Remove unused CDCLK divider fields
- Unify HDCP connector logging format
- Use display instead of graphics version in display code
- Move VBT and opregion debugfs next to the implementation
- Abstract opregion interface, use opaque type
- MTL fixes
- HPD handling fixes
- Add GuC submission interface version query
- Atomically invalidate userptr on mmu-notifier
- Update handling of MMIO triggered reports
- Don't make assumptions about intel_wakeref_t type
- Extend driver code of Xe_LPG to Xe_LPG+
- Add flex arrays to struct i915_syncmap
- Allow for very slow HuC loading
- DP tunneling and bandwidth allocation support
msm:
- Correct bindings for MSM8976 and SM8650 platforms
- Start migration of MDP5 platforms to DPU driver
- X1E80100 MDSS support
- DPU:
- Improve DSC allocation, fixing several important corner cases
- Add support for SDM630/SDM660 platforms
- Simplify dpu_encoder_phys_ops
- Apply fixes targeting DSC support with a single DSC encoder
- Apply fixes for HCTL_EN timing configuration
- X1E80100 support
- Add support for YUV420 over DP
- GPU:
- fix sc7180 UBWC config
- fix a7xx LLC config
- new gpu support: a305B, a750, a702
- machine support: SM7150 (different power levels than other a618)
- a7xx devcoredump support
habanalabs:
- configure IRQ affinity according to NUMA node
- move HBM MMU page tables inside the HBM
- improve device reset
- check extended PCIe errors
ivpu:
- updates to firmware API
- refactor BO allocation
imx:
- use devm_ functions during init
hisilicon:
- fix EDID includes
mgag200:
- improve ioremap usage
- convert to struct drm_edid
- Work around PCI write bursts
nouveau:
- disp: use kmemdup()
- fix EDID includes
- documentation fixes
qaic:
- fixes to BO handling
- make use of DRM managed release
- fix order of remove operations
rockchip:
- analogix_dp: get encoder port from DT
- inno_hdmi: support HDMI for RK3128
- lvds: error-handling fixes
ssd130x:
- support SSD133x plus DT bindings
tegra:
- fix error handling
tilcdc:
- make use of DRM managed release
v3d:
- show memory stats in debugfs
- Support display MMU page size
vc4:
- fix error handling in plane prepare_fb
- fix framebuffer test in plane helpers
virtio:
- add venus capset defines
vkms:
- fix OOB access when programming the LUT
- Kconfig improvements
vmwgfx:
- unmap surface before changing plane state
- fix memory leak in error handling
- documentation fixes
- list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid
- fix null-pointer deref in execbuf
- refactor display-mode probing
- fix fencing for creating cursor MOBs
- fix cursor-memory lifetime
xlnx:
- fix live video input for ZynqMP DPSUB
lima:
- fix memory leak
loongson:
- fail if no VRAM present
meson:
- switch to new drm_bridge_read_edid() interface
renesas:
- add RZ/G2L DU support plus DT bindings
mxsfb:
- Use managed mode config
sun4i:
- HDMI: updates to atomic mode setting
mediatek:
- Add display driver for MT8188 VDOSYS1
- DSI driver cleanups
- Filter modes according to hardware capability
- Fix a null pointer crash in mtk_drm_crtc_finish_page_flip
etnaviv:
- enhancements for NPU and MRT support"
* tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel: (1420 commits)
drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in -next repo
drm/amd/pm: wait for completion of the EnableGfxImu message
drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.1
drm/amdgpu: add smu 14.0.1 support
drm/amdgpu: add VPE 6.1.1 discovery support
drm/amdgpu/vpe: add VPE 6.1.1 support
drm/amdgpu/vpe: don't emit cond exec command under collaborate mode
drm/amdgpu/vpe: add collaborate mode support for VPE
drm/amdgpu/vpe: add PRED_EXE and COLLAB_SYNC OPCODE
drm/amdgpu/vpe: add multi instance VPE support
drm/amdgpu/discovery: add nbif v6_3_1 ip block
drm/amdgpu: Add nbif v6_3_1 ip block support
drm/amdgpu: Add pcie v6_1_0 ip headers (v5)
drm/amdgpu: Add nbif v6_3_1 ip headers (v5)
arch/powerpc: Remove <linux/fb.h> from backlight code
macintosh/via-pmu-backlight: Include <linux/backlight.h>
fbdev/chipsfb: Include <linux/backlight.h>
drm/etnaviv: Restore some id values
drm/amdkfd: make kfd_class constant
drm/amdgpu: add ring timeout information in devcoredump
...
|
|
A simple example of the utility of this autocleanup approach to
handling of_node_put().
In this particular case some of the nodes needed for the test are
not available and the _available_ version would cause them to be
skipped resulting in a test failure.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240225142714.286440-4-jic23@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The i should be signed to find out the end of the loop. Otherwise,
i >= 0 is always true and loop becomes infinite. Make its type to be
int.
Fixes: 6a9eda34418f ("mtd: spi-nor: core: set mtd->eraseregions for non-uniform erase map")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240304090103.818092-1-usama.anjum@collabora.com
|
|
SPI NOR gets the non uniform erase code cleaned. We stopped using
bitmasks for erase types and flags, and instead introduced dedicated
members. We then passed the SPI NOR erase map to MTD. Users can now
determine the erase regions and make informed decisions on partitions
size.
|
|
- small cleanup of struct->wacom_wac usage (Tatsunosuke Tobita)
|
|
- removal of unused data structures all over the place (Jiri Slaby)
|
|
- support for the following Bluetooth devices (Sandeep C S):
Samsung wireless Keyboard
Samsung wireless GamePad
Samsung Wireless Action Mouse
Samsung Wireless Book Cover
Samsung Wireless Universal Keyboard
Samsung Wireless HOGP Keyboard
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
- dead code removal in hid-nintendo (Jiapeng Chong)
|
|
- 2nd version of code for applying proper quirk depending on firmware version
for lenovo/cptkbd (Mikhail Khvainitski)
|
|
- assorted fixes and optimizations for amd-sfh (Basavaraj Natikar)
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add argument descriptions to the handle_eject_request() kerneldoc
comment.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In the existing code, per-policy flags don't have any impact i.e.
if cpufreq_driver boost is enabled and boost is disabled for one or
more of the policies, the cpufreq driver will behave as if boost is
enabled.
Fix this by incorporating per-policy boost flag in the policy->max
computation used in cpufreq_frequency_table_cpuinfo and setting the
default per-policy boost to mirror the cpufreq_driver boost flag.
Fixes: 218a06a79d9a ("cpufreq: Support per-policy performance boost")
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Tested-by:Yipeng Zou <zouyipeng@huawei.com> <mailto:zouyipeng@huawei.com>
Reviewed-by: Yipeng Zou <zouyipeng@huawei.com> <mailto:zouyipeng@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Measure initrd and command line using the CC protocol if the ordinary
TCG2 protocol is not implemented, typically on TDX confidential VMs
- Avoid creating mappings that are both writable and executable while
running in the EFI boot services. This is a prerequisite for getting
the x86 shim loader signed by MicroSoft again, which allows the
distros to install on x86 PCs that ship with EFI secure boot enabled.
- API update for struct platform_driver::remove()
* tag 'efi-next-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
virt: efi_secret: Convert to platform remove callback returning void
x86/efistub: Remap kernel text read-only before dropping NX attribute
efi/libstub: Add get_event_log() support for CC platforms
efi/libstub: Measure into CC protocol if TCG2 protocol is absent
efi/libstub: Add Confidential Computing (CC) measurement typedefs
efi/tpm: Use symbolic GUID name from spec for final events table
efi/libstub: Use TPM event typedefs from the TCG PC Client spec
|
|
'clk-rate-exclusive' into clk-next
- Increase dev_id len for clkdev lookups
* clk-samsung: (25 commits)
clk: samsung: Add CPU clock support for Exynos850
clk: samsung: Pass mask to wait_until_mux_stable()
clk: samsung: Keep register offsets in chip specific structure
clk: samsung: Keep CPU clock chip specific data in a dedicated struct
clk: samsung: Pass register layout type explicitly to CLK_CPU()
clk: samsung: Pass actual CPU clock registers base to CPU_CLK()
clk: samsung: Group CPU clock functions by chip
clk: samsung: Use single CPU clock notifier callback for all chips
clk: samsung: Reduce params count in exynos_register_cpu_clock()
clk: samsung: Pull struct exynos_cpuclk into clk-cpu.c
clk: samsung: Improve clk-cpu.c style
dt-bindings: clock: exynos850: Add CMU_CPUCLK0 and CMU_CPUCL1
clk: samsung: gs101: add support for cmu_peric1
clk: samsung: gs101: drop extra empty line
dt-bindings: clock: google,gs101-clock: add PERIC1 clock management unit
clk: samsung: exynos850: Propagate SPI IPCLK rate change
clk: samsung: gs101: gpio_peric0_pclk needs to be kept on
clk: samsung: exynos850: Add PDMA clocks
dt-bindings: clock: tesla,fsd: Fix spelling mistake
clk: samsung: gs101: add support for cmu_peric0
...
* clk-imx:
clk: imx: imx8mp: Fix SAI_MCLK_SEL definition
clk: imx: scu: Use common error handling code in imx_clk_scu_alloc_dev()
clk: imx: composite-8m: Delete two unnecessary initialisations in __imx8m_clk_hw_composite()
clk: imx: composite-8m: Less function calls in __imx8m_clk_hw_composite() after error detection
* clk-rockchip:
clk: rockchip: rk3399: Allow to set rate of clk_i2s0_frac's parent
clk: rockchip: rk3588: use linked clock ID for GATE_LINK
clk: rockchip: rk3588: fix indent
clk: rockchip: rk3588: fix pclk_vo0grf and pclk_vo1grf
dt-bindings: clock: rk3588: add missing PCLK_VO1GRF
dt-bindings: clock: rk3588: drop CLK_NR_CLKS
clk: rockchip: rk3588: fix CLK_NR_CLKS usage
clk: rockchip: rk3568: Add PLL rate for 128MHz
* clk-clkdev:
clkdev: Update clkdev id usage to allow for longer names
* clk-rate-exclusive:
clk: Add a devm variant of clk_rate_exclusive_get()
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge additional thermal control changes for 6.9-rc1 from Daniel Lezcano:
"- Fix memory leak in the error path at probe time in the Mediatek LVTS
driver (Christophe Jaillet)
- Fix control buffer enablement regression on Meditek MT7896 (Frank
Wunderlich)
- Drop spaces before TABs in different places: thermal-of, ST drivers
and Makefile (Geert Uytterhoeven)
- Adjust DT binding for NXP as fsl,tmu-range min/maxItems can vary
among several SoC versions (Fabio Estevam)
- Add support for H616 THS controller for the Sun8i platforms. Note
that this change relies on another change in the SoC specific code
which is included in this branch (Martin Botka)
- Don't fail probe due to zone registration failure because there is
no trip points defined in the DT (Mark Brown)
- Support variable TMU array size for new platforms (Peng Fan)
- Adjust the DT binding for thermal-of and make the polling time not
required and assume it is zero when not found in the DT (Konrad
Dybcio)
- Add r8a779h0 support in both the DT and the driver (Geert Uytterhoeven)"
* tag 'thermal-v6.9-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/rcar_gen3: Add support for R-Car V4M
dt-bindings: thermal: rcar-gen3-thermal: Add r8a779h0 support
thermal/of: Assume polling-delay(-passive) 0 when absent
dt-bindings: thermal-zones: Don't require polling-delay(-passive)
thermal/drivers/qoriq: Fix getting tmu range
thermal/drivers/sun8i: Don't fail probe due to zone registration failure
thermal/drivers/sun8i: Add support for H616 THS controller
thermal/drivers/sun8i: Add SRAM register access code
thermal/drivers/sun8i: Extend H6 calibration to support 4 sensors
thermal/drivers/sun8i: Explain unknown H6 register value
dt-bindings: thermal: sun8i: Add H616 THS controller
soc: sunxi: sram: export register 0 for THS on H616
dt-bindings: thermal: qoriq-thermal: Adjust fsl,tmu-range min/maxItems
thermal: Drop spaces before TABs
thermal/drivers/mediatek: Fix control buffer enablement on MT7896
thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an error handling path
|
|
'clk-microchip' into clk-next
* clk-remove:
clk: starfive: jh7110-vout: Convert to platform remove callback returning void
clk: starfive: jh7110-isp: Convert to platform remove callback returning void
clk: imx: imx8-acm: Convert to platform remove callback returning void
* clk-amlogic:
clk: meson: Add missing clocks to axg_clk_regmaps
* clk-qcom: (62 commits)
clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset
clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk'
clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk'
clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc
clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays
clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays
clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays
clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays
clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays
clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays
clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times
dt-bindings: clk: qcom: drop the SC7180 Modem subsystem clock controller
clk: qcom: drop the SC7180 Modem subsystem clock driver
clk: qcom: Use qcom_branch_set_clk_en()
clk: qcom: branch: Add a helper for setting the enable bit
clk: qcom: dispcc-sm8250: Make clk_init_data and pll_vco const
clk: qcom: gcc-sc8180x: Add missing UFS QREF clocks
clk: qcom: gcc-msm8953: add more resets
clk: qcom: videocc-*: switch to module_platform_driver
...
* clk-parent:
clk: Fix clk_core_get NULL dereference
* clk-microchip:
clk: microchip: mpfs: convert MSSPLL outputs to clk_divider
clk: microchip: mpfs: add missing MSSPLL outputs
clk: microchip: mpfs: setup for using other mss pll outputs
clk: microchip: mpfs: split MSSPLL in two
dt-bindings: can: mpfs: add missing required clock
dt-bindings: clock: mpfs: add more MSSPLL output definitions
|
|
'clk-allwinner' into clk-next
* clk-aspeed:
clk: ast2600: Add FSI parent clock with correct rate
dt-bindings: clock: ast2600: Add FSI clock
* clk-keystone:
clk: keystone: sci-clk: Adding support for non contiguous clocks
* clk-mobileye:
dt-bindings: reset: mobileye,eyeq5-reset: add bindings
dt-bindings: clock: mobileye,eyeq5-clk: add bindings
clk: fixed-factor: add fwname-based constructor functions
clk: fixed-factor: add optional accuracy support
* clk-allwinner:
clk: sunxi: usb: fix kernel-doc warnings
clk: sunxi: sun9i-cpus: fix kernel-doc warnings
clk: sunxi: a20-gmac: fix kernel-doc warnings
|
|
and 'clk-bulk' into clk-next
- Add a devm_clk_bulk_get_all_enable() API to get and enable all clks
for a device
- Fix some static checker errors in the hisilicon clk driver
* clk-renesas: (25 commits)
clk: renesas: r8a779h0: Add RPC-IF clock
clk: renesas: r8a779h0: Add SYS-DMAC clocks
clk: renesas: r8a779h0: Add SDHI clock
clk: renesas: r8a779h0: Add EtherAVB clocks
clk: renesas: r9a07g04[34]: Fix typo for sel_shdi variable
clk: renesas: r9a07g04[34]: Use SEL_SDHI1_STS status configuration for SD1 mux
clk: renesas: r8a779f0: Correct PFC/GPIO parent clock
clk: renesas: r8a779g0: Correct PFC/GPIO parent clocks
clk: renesas: r8a779h0: Add I2C clocks
clk: renesas: r8a779h0: Add watchdog clock
clk: renesas: r8a779h0: Add PFC/GPIO clocks
clk: renesas: r8a779g0: Fix PCIe clock name
clk: renesas: cpg-mssr: Add support for R-Car V4M
clk: renesas: rcar-gen4: Add support for FRQCRC1
clk: renesas: r9a07g043: Add clock and reset entries for CRU
clk: renesas: r9a08g045: Add clock and reset support for watchdog
dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions
dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support
dt-bindings: power: Add r8a779h0 SYSC power domain definitions
dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support
...
* clk-cleanup:
clk: zynq: Prevent null pointer dereference caused by kmalloc failure
clk: fractional-divider: Use bit operations consistently
clk: fractional-divider: Move mask calculations out of lock
clk: ti: dpll3xxx: use correct function names in kernel-doc
clk: clocking-wizard: Remove redundant initialization of pointer div_addr
clk: keystone: sci-clk: match func name comment to actual
clk: cdce925: Remove redundant assignment to variable 'rate'
MAINTAINERS: drop Sekhar Nori
* clk-hisilicon:
clk: hisilicon: Use devm_kcalloc() instead of devm_kzalloc()
clk: hisilicon: hi3559a: Fix an erroneous devm_kfree()
clk: hisilicon: hi3519: Release the correct number of gates in hi3519_clk_unregister()
* clk-mediatek:
clk: mediatek: clk-mt8173-apmixedsys: Use common error handling code in clk_mt8173_apmixed_probe()
clk: mediatek: add infracfg reset controller for mt7988
dt-bindings: reset: mediatek: add MT7988 infracfg reset IDs
dt-bindings: clock: mediatek: convert SSUSBSYS to the json-schema clock
dt-bindings: clock: mediatek: convert PCIESYS to the json-schema clock
dt-bindings: clock: mediatek: convert hifsys to the json-schema clock
clk: mediatek: mt7981-topckgen: flag SGM_REG_SEL as critical
clk: mediatek: mt8183: Correct parent of CLK_INFRA_SSPM_32K_SELF
clk: mediatek: mt7622-apmixedsys: Fix an error handling path in clk_mt8135_apmixed_probe()
clk: mediatek: mt8135: Fix an error handling path in clk_mt8135_apmixed_probe()
* clk-bulk:
clk: Provide managed helper to get and enable bulk clocks
|
