summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-08-29mwifiex: pcie: add reset_d3cold quirk for Surface gen4+ devicesTsuchiya Yuto
To reset mwifiex on Surface gen4+ (Pro 4 or later gen) devices, it seems that putting the wifi device into D3cold is required according to errata.inf file on Windows installation (Windows/INF/errata.inf). This patch adds a function that performs power-cycle (put into D3cold then D0) and call the function at the end of reset_prepare(). Note: Need to also reset the parent device (bridge) of wifi on SB1; it might be because the bridge of wifi always reports it's in D3hot. When I tried to reset only the wifi device (not touching parent), it gave the following error and the reset failed: acpi device:4b: Cannot transition to power state D0 for parent in D3hot mwifiex_pcie 0000:03:00.0: can't change power state from D3cold to D0 (config space inaccessible) Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210820142050.35741-3-verdre@v0yd.nl
2021-08-29mwifiex: pcie: add DMI-based quirk implementation for Surface devicesJonas Dreßler
This commit adds the ability to apply device-specific quirks to the mwifiex driver. It uses DMI matching similar to the quirks brcmfmac uses with dmi.c. We'll add identifiers to match various MS Surface devices, which this is primarily meant for, later. This commit is a slightly modified version of a previous patch sent in by Tsuchiya Yuto. Co-developed-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210820142050.35741-2-verdre@v0yd.nl
2021-08-29brcmfmac: pcie: fix oops on failure to resume and reprobeAhmad Fatoum
When resuming from suspend, brcmf_pcie_pm_leave_D3 will first attempt a hot resume and then fall back to removing the PCI device and then reprobing. If this probe fails, the kernel will oops, because brcmf_err, which is called to report the failure will dereference the stale bus pointer. Open code and use the default bus-less brcmf_err to avoid this. Fixes: 8602e62441ab ("brcmfmac: pass bus to the __brcmf_err() in pcie.c") Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210817063521.22450-1-a.fatoum@pengutronix.de
2021-08-29bcma: Drop the unused parameter of bcma_scan_read32()Zenghui Yu
As it had never been used since the initial commit 8369ae33b705 ("bcma: add Broadcom specific AMBA bus driver"). Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210727025232.663-3-yuzenghui@huawei.com
2021-08-29bcma: Fix memory leak for internally-handled coresZenghui Yu
kmemleak reported that dev_name() of internally-handled cores were leaked on driver unbinding. Let's use device_initialize() to take refcounts for them and put_device() to properly free the related stuff. While looking at it, there's another potential issue for those which should be *registered* into driver core. If device_register() failed, we put device once and freed bcma_device structures. In bcma_unregister_cores(), they're treated as unregistered and we hit both UAF and double-free. That smells not good and has also been fixed now. Fixes: ab54bc8460b5 ("bcma: fill core details for every device") Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210727025232.663-2-yuzenghui@huawei.com
2021-08-29Merge commit 'e257d969f36503b8eb1240f32653a1afb3109f86' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next I think last commits in tag iwlwifi-next-for-kalle-2021-08-26 are not ready yet so I'm skipping those and pulling an earlier commit. I modified Luca's description below to not include the skipped commits. iwlwifi patches for v5.15 * Support scanning hidden 6GHz networks; * Some improvements in the FW error dumps; * Add some HE capability flags * A bunch of janitorial clean-ups; * Clean-ups in the TX code; * Small fix for SMPS; * Support for a new hardware family (Bz); * Small fix in the scan code; * A bunch of changes in the D3 code, including new FW API; * Finalize the refactoring of 6GHz scan; * Initial changes in the SAR profile code; * Fix reading one of our ACPI tables (WTAS); * Support some new ACPI table revisions; * Support new API of the WoWlan status FW notification; * Fixes in SAR ACPI tables handling; * Some debugging improvements; * Fix in ROC; * Support for new FW API versions; * Support new FW command versions; * Some other small fixes, clean-ups and improvements.
2021-08-29virtio_net: reduce raw_smp_processor_id() calling in virtnet_xdp_get_sqLi RongQing
smp_processor_id()/raw* will be called once each when not more queues in virtnet_xdp_get_sq() which is called in non-preemptible context, so it's safe to call the function smp_processor_id() once. Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-29niu: switch from 'pci_' to 'dma_' APIChristophe JAILLET
In [1], Christoph Hellwig has proposed to remove the wrappers in include/linux/pci-dma-compat.h. Some reasons why this API should be removed have been given by Julia Lawall in [2]. A coccinelle script has been used to perform the needed transformation Only relevant parts are given below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. Finally, the now useless 'dma_mask' variable has been removed. It has been compile tested. @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) [1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/ [2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-29fddi: switch from 'pci_' to 'dma_' APIChristophe JAILLET
In [1], Christoph Hellwig has proposed to remove the wrappers in include/linux/pci-dma-compat.h. Some reasons why this API should be removed have been given by Julia Lawall in [2]. A coccinelle script has been used to perform the needed transformation Only relevant parts are given below. It has been compile tested. @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) [1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/ [2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-29net: spider_net: switch from 'pci_' to 'dma_' APIChristophe JAILLET
In [1], Christoph Hellwig has proposed to remove the wrappers in include/linux/pci-dma-compat.h. Some reasons why this API should be removed have been given by Julia Lawall in [2]. A coccinelle script has been used to perform the needed transformation Only relevant parts are given below. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) [1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/ [2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Geoff Levand <geoff@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-29octeontx2-pf: Add vlan-etype to ntuple filtersSubbaraya Sundeep
NPC extraction profile marks layer types NPC_LT_LB_CTAG for CTAG and NPC_LT_LB_STAG_QINQ for STAG after parsing input packet. Those layer types can be used to install ntuple filters using vlan-etype option. Below are the commands and corresponding behavior with this patch in place. > alias nt "ethtool -U eth0 flow-type ether" > nt vlan 5 m 0xf000 action 0 Input packets with outer VLAN id as 5 i.e, stag packets with VLAN id 5 and ctag packets with VLAN id as 5 are hit. > nt vlan-etype 0x8100 action 0 All input ctag packets with any VLAN id are hit. > nt vlan-etype 0x88A8 action 0 All input stag packets with any VLAN id are hit. > nt vlan-etype 0x8100 vlan 5 m 0xf000 action 0 All input ctag packets with VLAN id 5 are hit. > nt vlan-etype 0x88A8 vlan 5 m 0xf000 action 0 All input stag packets with VLAN id 5 are hit. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-29atlantic: Fix driver resume flow.Sudarsana Reddy Kalluru
Driver crashes when restoring from the Hibernate. In the resume flow, driver need to clean up the older nic/vec objects and re-initialize them. Fixes: 8aaa112a57c1d ("net: atlantic: refactoring pm logic") Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-29octeontx2-af: Fix inconsistent license textSunil Goutham
Fixed inconsistent license text across the RVU admin function driver. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-29octeontx2-pf: Fix inconsistent license textSunil Goutham
Fixed inconsistent license text across the netdev drivers. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-29Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-David S. Miller
queue Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2021-08-27 ravindhan Gunasekaran says: This adds support for Credit-based shaper qdisc offload from Traffic Control system. It enables traffic prioritization and bandwidth reservation via the Credit-Based Shaper which is implemented in hardware by i225 controller. Patch 1/3 adds a default cycle-time for TSN mode to be configured. Patch 2/3 helps to separate TSN mode programming on the fly and during reset sequence. It also simplifies handling features flags for various TSN modes supported by i225 in the driver. Patch 3/3 adds support for IEEE802.1Qav(CBS) standard implemented in i225 HW. Two sets of CBS HW shapers are present in i225 and driver enables them in the two high priority queues. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-29Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.15. Major changes: wcn36xx * allow firmware name to be overridden by DT
2021-08-29wilc1000: Convert module-global "isinit" to device-specific variableDavid Mosberger-Tang
Move static "isinit" variable to wilc_spi structure to allow multiple WILC1000 devices per machine. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210828151346.3012697-1-davidm@egauge.net
2021-08-29brcmfmac: Add WPA3 Personal with FT to supported cipher suitesPaweł Drewniak
This allows the driver to connect to BSSIDs supporting SAE with 802.11r. Tested on Raspberry Pi 4 Model B (STA) and UniFi 6LR/OpenWRT 21.02.0-rc2. AP was set to 'sae-mixed' (WPA2/3 Personal). Signed-off-by: Paweł Drewniak <czajernia@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210824221330.3847139-1-czajernia@gmail.com
2021-08-29rsi: make array fsm_state static const, makes object smallerColin Ian King
Don't populate the array fsm_state on the stack but instead it static const. Makes the object code smaller by 154 bytes: Before: text data bss dec hex filename 9213 3904 0 13117 333d .../wireless/rsi/rsi_91x_debugfs.o After: text data bss dec hex filename 8995 3968 0 12963 32a3 .../wireless/rsi/rsi_91x_debugfs.o (gcc version 10.3.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210819125018.8577-1-colin.king@canonical.com
2021-08-29rtlwifi: rtl8192de: Fix initialization of place in ↵Nathan Chancellor
_rtl92c_phy_get_rightchnlplace() Clang warns: drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c:901:6: warning: variable 'place' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] if (chnl > 14) { ^~~~~~~~~ drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c:909:9: note: uninitialized use occurs here return place; ^~~~~ drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c:901:2: note: remove the 'if' if its condition is always true if (chnl > 14) { ^~~~~~~~~~~~~~~ drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c:899:10: note: initialize the variable 'place' to silence this warning u8 place; ^ = '\0' 1 warning generated. Commit 369956ae5720 ("rtlwifi: rtl8192de: Remove redundant variable initializations") removed the initialization of place but it appears that this removal was in the wrong function. _rtl92c_phy_get_rightchnlplace() returns place's value at the end of the function so now if the if statement is false, place never gets initialized. Add that initialization back to address the warning. place's initialization is not necessary in rtl92d_get_rightchnlplace_for_iqk() as place is only used within the if statement so it can be removed, which is likely what was intended in the first place. Fixes: 369956ae5720 ("rtlwifi: rtl8192de: Remove redundant variable initializations") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210823222014.764557-1-nathan@kernel.org
2021-08-29rtw88: add quirk to disable pci caps on HP Pavilion 14-ce0xxxUgo Rémery
8821CE causes random freezes on HP Pavilion 14-ce0019nf. Add a quirk to disable pci ASPM capability. Signed-off-by: Ugo Rémery <ugo.remery@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210822194932.29630-1-Larry.Finger@lwfinger.net
2021-08-29clk: qcom: Add SM6350 GCC driverKonrad Dybcio
This adds Global Clock controller (GCC) driver for SM6350 SoC Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210820203624.232268-3-konrad.dybcio@somainline.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-29ath6kl: wmi: fix an error code in ath6kl_wmi_sync_point()Dan Carpenter
This error path is unlikely because of it checked for NULL and returned -ENOMEM earlier in the function. But it should return an error code here as well if we ever do hit it because of a race condition or something. Fixes: bdcd81707973 ("Add ath6kl cleaned up driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210813113438.GB30697@kili
2021-08-29ath9k: fix sleeping in atomic contextMiaoqing Pan
The problem is that gpio_free() can sleep and the cfg_soc() can be called with spinlocks held. One problematic call tree is: --> ath_reset_internal() takes &sc->sc_pcu_lock spin lock --> ath9k_hw_reset() --> ath9k_hw_gpio_request_in() --> ath9k_hw_gpio_request() --> ath9k_hw_gpio_cfg_soc() Remove gpio_free(), use error message instead, so we should make sure there is no GPIO conflict. Also remove ath9k_hw_gpio_free() from ath9k_hw_apply_gpio_override(), as gpio_mask will never be set for SOC chips. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1628481916-15030-1-git-send-email-miaoqing@codeaurora.org
2021-08-29ath9k: fix OOB read ar9300_eeprom_restore_internalZekun Shen
Bad header can have large length field which can cause OOB. cptr is the last bytes for read, and the eeprom is parsed from high to low address. The OOB, triggered by the condition length > cptr could cause memory error with a read on negative index. There are some sanity check around length, but it is not compared with cptr (the remaining bytes). Here, the corrupted/bad EEPROM can cause panic. I was able to reproduce the crash, but I cannot find the log and the reproducer now. After I applied the patch, the bug is no longer reproducible. Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/YM3xKsQJ0Hw2hjrc@Zekuns-MBP-16.fios-router.home
2021-08-29wcn36xx: Fix missing frame timestamp for beacon/probe-respLoic Poulain
When receiving a beacon or probe response, we should update the boottime_ns field which is the timestamp the frame was received at. (cf mac80211.h) This fixes a scanning issue with Android since it relies on this timestamp to determine when the AP has been seen for the last time (via the nl80211 BSS_LAST_SEEN_BOOTTIME parameter). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1629992768-23785-1-git-send-email-loic.poulain@linaro.org
2021-08-29wcn36xx: Allow firmware name to be overridden by DTBjorn Andersson
The WLAN NV firmware blob differs between platforms, and possibly devices, so add support in the wcn36xx driver for reading the path of this file from DT in order to allow these files to live in a generic file system (or linux-firmware). For some reason the parent (wcnss_ctrl) also needs to upload this blob, so rather than specifying the same information in both nodes wcn36xx reads the string from the parent's of_node. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Aníbal Limón <anibal.limon@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210824171225.686683-1-bjorn.andersson@linaro.org
2021-08-29wcn36xx: Ensure finish scan is not requested before start scanJoseph Gates
If the operating channel is the first in the scan list, it was seen that a finish scan request would be sent before a start scan request was sent, causing the firmware to fail all future scans. Track the current channel being scanned to avoid requesting the scan finish before it starts. Cc: <stable@vger.kernel.org> Fixes: 5973a2947430 ("wcn36xx: Fix software-driven scan") Signed-off-by: Joseph Gates <jgates@squareup.com> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1629286303-13179-1-git-send-email-loic.poulain@linaro.org
2021-08-28clk: vc5: Add properties for configuring SD/OE behaviorSean Anderson
The SD/OE pin may be configured to enable output when high or low, and to shutdown the device when high. This behavior is controller by the SH and SP bits of the Primary Source and Shutdown Register (and to a lesser extent the OS and OE bits). By default, both bits are 0 (unless set by OTP memory), but they may need to be configured differently, depending on the external circuitry controlling the SD/OE pin. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20210809223813.3766204-3-sean.anderson@seco.com Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-28clk: vc5: Use dev_err_probeSean Anderson
Convert uses of dev_err (+ return) to dev_err_probe. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Link: https://lore.kernel.org/r/20210809223813.3766204-2-sean.anderson@seco.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-28clk: zynqmp: Fix kernel-doc formatMichal Simek
Align structure and function names with definitions. Issues are reported by kernel-doc script as: drivers/clk/zynqmp/clk-gate-zynqmp.c:24: warning: expecting prototype for struct clk_gate. Prototype was for struct zynqmp_clk_gate instead drivers/clk/zynqmp/clk-gate-zynqmp.c:75: warning: expecting prototype for zynqmp_clk_gate_is_enable(). Prototype was for zynqmp_clk_gate_is_enabled() instead Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/26526e144296373b2c75e75865dd023158f9bfc7.1629718424.git.michal.simek@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-28clk: at91: clk-generated: Limit the requested rate to our rangeCodrin Ciubotariu
On clk_generated_determine_rate(), the requested rate could be outside of clk's range. Limit the rate to the clock's range to not return an error. Fixes: df70aeef6083 ("clk: at91: add generated clock driver") Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20210707131213.3283509-1-codrin.ciubotariu@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-28clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gatesSergio Paracuellos
'clk_init_data' for gates is setting up 'CLK_IS_CRITICAL' flag for all of them. This was being doing because some drivers of this SoC might not be ready to use the clock and we don't wanted the kernel to disable them since default behaviour without clock driver was to set all gate bits to enabled state. After a bit more testing and checking driver code it is safe to remove this flag and just let the kernel to disable those gates that are not in use. No regressions seems to appear. Fixes: 48df7a26f470 ("clk: ralink: add clock driver for mt7621 SoC") Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210727055537.11785-1-sergio.paracuellos@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-28clk: renesas: rcar-usb2-clock-sel: Fix kernel NULL pointer dereferenceAdam Ford
The probe was manually passing NULL instead of dev to devm_clk_hw_register. This caused a Unable to handle kernel NULL pointer dereference error. Fix this by passing 'dev'. Signed-off-by: Adam Ford <aford173@gmail.com> Fixes: a20a40a8bbc2 ("clk: renesas: rcar-usb2-clock-sel: Fix error handling in .probe()") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-28clk: zynqmp: Fix a memory leakShubhrajyoti Datta
Fix a memory leak of mux. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/20210818065929.12835-3-shubhrajyoti.datta@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-28clk: zynqmp: Check the return typeShubhrajyoti Datta
Currently the return value of of_clk_add_hw_provider is ignored. lets check and return value. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/20210818065929.12835-2-shubhrajyoti.datta@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-28clk: at91: sama7g5: remove all kernel-doc & kernel-doc warningsRandy Dunlap
Remove all "/**" kernel-doc markers from sama7g5.c since they are all internal to this driver source file only. This eliminates 14 warnings that were reported by the kernel test robot. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20210819223237.20115-1-rdunlap@infradead.org Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-28clk: zynqmp: fix kernel docRajan Vaja
Add missing description of 'custom_type_flag' structure member. Fixes: e605fa9c4a0c ("clk: zynqmp: Add support for custom type flags") Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lore.kernel.org/r/1629720433-19019-1-git-send-email-rajan.vaja@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-28clk: kirkwood: Fix a clocking boot regressionLinus Walleij
Since a few kernel releases the Pogoplug 4 has crashed like this during boot: Unable to handle kernel NULL pointer dereference at virtual address 00000002 (...) [<c04116ec>] (strlen) from [<c00ead80>] (kstrdup+0x1c/0x4c) [<c00ead80>] (kstrdup) from [<c04591d8>] (__clk_register+0x44/0x37c) [<c04591d8>] (__clk_register) from [<c04595ec>] (clk_hw_register+0x20/0x44) [<c04595ec>] (clk_hw_register) from [<c045bfa8>] (__clk_hw_register_mux+0x198/0x1e4) [<c045bfa8>] (__clk_hw_register_mux) from [<c045c050>] (clk_register_mux_table+0x5c/0x6c) [<c045c050>] (clk_register_mux_table) from [<c0acf3e0>] (kirkwood_clk_muxing_setup.constprop.0+0x13c/0x1ac) [<c0acf3e0>] (kirkwood_clk_muxing_setup.constprop.0) from [<c0aceae0>] (of_clk_init+0x12c/0x214) [<c0aceae0>] (of_clk_init) from [<c0ab576c>] (time_init+0x20/0x2c) [<c0ab576c>] (time_init) from [<c0ab3d18>] (start_kernel+0x3dc/0x56c) [<c0ab3d18>] (start_kernel) from [<00000000>] (0x0) Code: e3130020 1afffffb e12fff1e c08a1078 (e5d03000) This is because the "powersave" mux clock 0 was provided in an unterminated array, which is required by the loop in the driver: /* Count, allocate, and register clock muxes */ for (n = 0; desc[n].name;) n++; Here n will go out of bounds and then call clk_register_mux() on random memory contents after the mux clock. Fix this by terminating the array with a blank entry. Fixes: 105299381d87 ("cpufreq: kirkwood: use the powersave multiplexer") Cc: stable@vger.kernel.org Cc: Andrew Lunn <andrew@lunn.ch> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Gregory CLEMENT <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210814235514.403426-1-linus.walleij@linaro.org Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-28clk: qcom: rpmh: Add support for RPMH clocks on SM6350Konrad Dybcio
Add support for RPMH clocks on SM6350 SoCs. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210820203243.230157-3-konrad.dybcio@somainline.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-28clk: qcom: adjust selects for SM_VIDEOCC_8150 and SM_VIDEOCC_8250Lukas Bulwahn
Commit 5658e8cf1a8a ("clk: qcom: add video clock controller driver for SM8150") and commit 0e94711a1f29 ("clk: qcom: add video clock controller driver for SM8250") add config SM_VIDEOCC_8150 and config SM_VIDEOCC_8250, which select the non-existing configs SDM_GCC_8150 and SDM_GCC_8250, respectively. Hence, ./scripts/checkkconfigsymbols.py warns: SDM_GCC_8150 Referencing files: drivers/clk/qcom/Kconfig SDM_GCC_8250 Referencing files: drivers/clk/qcom/Kconfig It is probably just a typo (or naming confusion of using SM_GCC_xxx and SDM_GCC_xxx for various Qualcomm clock drivers) in the config definitions for config SM_VIDEOCC_8150 and SM_VIDEOCC_8250, and intends to select the existing SM_GCC_8150 and SM_GCC_8250, respectively. Adjust the selects to the existing configs. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20210816135930.11810-1-lukas.bulwahn@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-28clk: qcom: Add Global Clock controller (GCC) driver for SM6115Iskren Chernev
Add support for the global clock controller found on SM6115 based devices. This should allow most non-multimedia device drivers to probe and control their clocks. Based on CAF implementation. GDSCs ported from downstream DT. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20210805161107.1194521-3-iskren.chernev@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-08-28Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "A single fix for a race introduced by a fix that went into 5.14-rc5" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: Fix hang of freezing queue between blocking and running device
2021-08-28Merge tag 'usb-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds
Pull USB fixes from Greg KH: "Here are a few tiny USB fixes for reported issues with some USB drivers. These fixes include: - gadget driver fixes for regressions - tcpm driver fix - dwc3 driver fixes - xhci renesas firmware loading fix, again. - usb serial option driver device id addition - usb serial ch341 revert for regression All all of these have been in linux-next with no reported problems" * tag 'usb-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: u_audio: fix race condition on endpoint stop usb: gadget: f_uac2: fixup feedback endpoint stop usb: typec: tcpm: Raise vdm_sm_running flag only when VDM SM is running usb: renesas-xhci: Prefer firmware loading on unknown ROM state usb: dwc3: gadget: Stop EP0 transfers during pullup disable usb: dwc3: gadget: Fix dwc3_calc_trbs_left() Revert "USB: serial: ch341: fix character loss at high transfer rates" USB: serial: option: add new VID/PID to support Fibocom FG150
2021-08-28hwmon: add driver for Aquacomputer D5 NextAleksa Savic
This driver exposes hardware sensors of the Aquacomputer D5 Next watercooling pump, which communicates through a proprietary USB HID protocol. Available sensors are pump and fan speed, power, voltage and current, as well as coolant temperature. Also available through debugfs are the serial number, firmware version and power-on count. Attaching a fan is optional and allows it to be controlled using temperature curves directly from the pump. If it's not connected, the fan-related sensors will report zeroes. The pump can be configured either through software or via its physical interface. Configuring the pump through this driver is not implemented, as it seems to require sending it a complete configuration. That includes addressable RGB LEDs, for which there is no standard sysfs interface. Thus, that task is better suited for userspace tools. This driver has been tested on x86_64, both in-kernel and as a module. Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-08-28Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-08-27 This series contains updates to ice driver only. Jake corrects the iterator used for looping Tx timestamp and removes dead code related to pin configuration. He also adds locking around flushing of the Tx tracker and restarts the periodic clock following time changes. Brett corrects the locking around updating netdev dev_addr. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-28ionic: recreate hwstamp queues on ifupShannon Nelson
The queues can be freed in ionic_close(). They need to be recreated after ionic_open(). It doesn't need to replay the whole config. It only needs to create the timestamping queues again. Signed-off-by: Allen Hubbe <allenbh@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-28ionic: pull hwstamp queue_lock up a levelShannon Nelson
Move the hwstamp configuration use of queue_lock up a level to simplify use and error handling. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-28ionic: add queue lock around open and stopShannon Nelson
Add the queue configuration lock to ionic_open() and ionic_stop() so that they don't collide with other in parallel queue configuration actions such as MTU changes as can be demonstrated with a tight loop of ifup/change-mtu/ifdown. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-28ionic: fill mac addr earlier in add_addrShannon Nelson
Make sure the ctx struct has the new mac address before any save operations happen. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-29 16:16:06 +0000