summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-01-04serial: sc16is7xx: replace hardcoded divisor value with BIT() macroHugo Villeneuve
To better show why the limit is what it is, since we have only 16 bits for the divisor. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-13-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: add explicit return for some switch default casesHugo Villeneuve
Allows to simplify code by removing the break statement in the default switch/case in some functions. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-12-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: add macro for max number of UART portsHugo Villeneuve
Add macro to hold the maximum number of UART ports per IC/device. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-11-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: add driver name to struct uart_driverHugo Villeneuve
Make sure that the driver name is displayed instead of "unknown" when displaying the driver infos: Before: grep ttySC /proc/tty/drivers unknown /dev/ttySC 243 0-7 serial After: grep ttySC /proc/tty/drivers sc16is7xx /dev/ttySC 243 0-7 serial Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-10-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: use i2c_get_match_data()Hugo Villeneuve
Use preferred i2c_get_match_data() instead of device_get_match_data() and i2c_client_get_device_id() to get the driver match data. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-9-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: use spi_get_device_match_data()Hugo Villeneuve
Use preferred spi_get_device_match_data() instead of device_get_match_data() and spi_get_device_id() to get the driver match data. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-8-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfieldHugo Villeneuve
Replace the explicit sc16is7xx_lines bitfield declaration with the generic macro DECLARE_BITMAP() to reserve just enough memory to contain all required bits. This also improves code self-documentation by showing the maximum number of bits required. This conversion now makes sc16is7xx_lines an array, so drop the "&" before sc16is7xx_lines in all bit access functions. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-7-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: improve do/while loop in sc16is7xx_irq()Hugo Villeneuve
Simplify and improve readability by replacing while(1) loop with do {} while, and by using the keep_polling variable as the exit condition, making it more explicit. Fixes: 834449872105 ("sc16is7xx: Fix for multi-channel stall") Cc: <stable@vger.kernel.org> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-6-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq()Hugo Villeneuve
Commit 834449872105 ("sc16is7xx: Fix for multi-channel stall") changed sc16is7xx_port_irq() from looping multiple times when there was still interrupts to serve. It simply changed the do {} while(1) loop to a do {} while(0) loop, which makes the loop itself now obsolete. Clean the code by removing this obsolete do {} while(0) loop. Fixes: 834449872105 ("sc16is7xx: Fix for multi-channel stall") Cc: <stable@vger.kernel.org> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-5-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: set safe default SPI clock frequencyHugo Villeneuve
15 MHz is supported only by 76x variants. If the SPI clock frequency is not specified, use a safe default clock value of 4 MHz that is supported by all variants. Also use HZ_PER_MHZ macro to improve readability. Fixes: 2c837a8a8f9f ("sc16is7xx: spi interface is added") Cc: <stable@vger.kernel.org> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-4-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: add check for unsupported SPI modes during probeHugo Villeneuve
The original comment is confusing because it implies that variants other than the SC16IS762 supports other SPI modes beside SPI_MODE_0. Extract from datasheet: The SC16IS762 differs from the SC16IS752 in that it supports SPI clock speeds up to 15 Mbit/s instead of the 4 Mbit/s supported by the SC16IS752... In all other aspects, the SC16IS762 is functionally and electrically the same as the SC16IS752. The same is also true of the SC16IS760 variant versus the SC16IS740 and SC16IS750 variants. For all variants, only SPI mode 0 is supported. Change comment and abort probing if the specified SPI mode is not SPI_MODE_0. Fixes: 2c837a8a8f9f ("sc16is7xx: spi interface is added") Cc: <stable@vger.kernel.org> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-3-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe errorHugo Villeneuve
If an error occurs during probing, the sc16is7xx_lines bitfield may be left in a state that doesn't represent the correct state of lines allocation. For example, in a system with two SC16 devices, if an error occurs only during probing of channel (port) B of the second device, sc16is7xx_lines final state will be 00001011b instead of the expected 00000011b. This is caused in part because of the "i--" in the for/loop located in the out_ports: error path. Fix this by checking the return value of uart_add_one_port() and set line allocation bit only if this was successful. This allows the refactor of the obfuscated for(i--...) loop in the error path, and properly call uart_remove_one_port() only when needed, and properly unset line allocation bits. Also use same mechanism in remove() when calling uart_remove_one_port(). Fixes: c64349722d14 ("sc16is7xx: support multiple devices") Cc: <stable@vger.kernel.org> Cc: Yury Norov <yury.norov@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-2-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: 8250_exar: Set missing rs485_supported flagLino Sanfilippo
The UART supports an auto-RTS mode in which the RTS pin is automatically activated during transmission. So mark this mode as being supported even if RTS is not controlled by the driver but the UART. Also the serial core expects now at least one of both modes rts-on-send or rts-after-send to be supported. This is since during sanitization unsupported flags are deleted from a RS485 configuration set by userspace. However if the configuration ends up with both flags unset, the core prints a warning since it considers such a configuration invalid (see uart_sanitize_serial_rs485()). Cc: <stable@vger.kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20240103061818.564-8-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: omap: do not override settings for RS485 supportLino Sanfilippo
The drivers RS485 support is deactivated if there is no RTS GPIO available. This is done by nullifying the ports rs485_supported struct. After that however the settings in serial_omap_rs485_supported are assigned to the same structure unconditionally, which results in an unintended reactivation of RS485 support. Fix this by moving the assignment to the beginning of serial_omap_probe_rs485() and thus before uart_get_rs485_mode() gets called. Also replace the assignment of rs485_config() to have the complete RS485 setup in one function. Fixes: e2752ae3cfc9 ("serial: omap: Disallow RS-485 if rts-gpio is not specified") Cc: <stable@vger.kernel.org> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240103061818.564-7-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: core, imx: do not set RS485 enabled if it is not supportedLino Sanfilippo
If the imx driver cannot support RS485 it nullifies the ports rs485_supported structure. But it still calls uart_get_rs485_mode() which may set the RS485_ENABLED flag nevertheless. This may lead to an attempt to configure RS485 even if it is not supported when the flag is evaluated in uart_configure_port() at port startup. Avoid this by bailing out of uart_get_rs485_mode() if the RS485_ENABLED flag is not supported by the caller. With this fix a check for RTS availability is now obsolete in the imx driver, since it can not evaluate to true any more. So remove this check. Furthermore the explicit nullifcation of rs485_supported is not needed, since the memory has already been set to zeros at allocation. So remove this, too. Fixes: 00d7a00e2a6f ("serial: imx: Fill in rs485_supported") Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: <stable@vger.kernel.org> Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240103061818.564-6-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: core: make sure RS485 cannot be enabled when it is not supportedLino Sanfilippo
Some uart drivers specify a rs485_config() function and then decide later to disable RS485 support for some reason (e.g. imx and ar933). In these cases userspace may be able to activate RS485 via TIOCSRS485 nevertheless, since in uart_set_rs485_config() an existing rs485_config() function indicates that RS485 is supported. Make sure that this is not longer possible by checking the uarts rs485_supported.flags instead and bailing out if SER_RS485_ENABLED is not set. Furthermore instead of returning an empty structure return -ENOTTY if the RS485 configuration is requested via TIOCGRS485 but RS485 is not supported. This has a small impact on userspace visibility but it is consistent with the -ENOTTY error for TIOCGRS485. Fixes: e849145e1fdd ("serial: ar933x: Fill in rs485_supported") Fixes: 55e18c6b6d42 ("serial: imx: Remove serial_rs485 sanitization") Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: <stable@vger.kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20240103061818.564-5-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: core: fix sanitizing check for RTS settingsLino Sanfilippo
Among other things uart_sanitize_serial_rs485() tests the sanity of the RTS settings in a RS485 configuration that has been passed by userspace. If RTS-on-send and RTS-after-send are both set or unset the configuration is adjusted and RTS-after-send is disabled and RTS-on-send enabled. This however makes only sense if both RTS modes are actually supported by the driver. With commit be2e2cb1d281 ("serial: Sanitize rs485_struct") the code does take the driver support into account but only checks if one of both RTS modes are supported. This may lead to the errorneous result of RTS-on-send being set even if only RTS-after-send is supported. Fix this by changing the implemented logic: First clear all unsupported flags in the RS485 configuration, then adjust an invalid RTS setting by taking into account which RTS mode is supported. Cc: <stable@vger.kernel.org> Fixes: be2e2cb1d281 ("serial: Sanitize rs485_struct") Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20240103061818.564-4-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: core: set missing supported flag for RX during TX GPIOLino Sanfilippo
If the RS485 feature RX-during-TX is supported by means of a GPIO set the according supported flag. Otherwise setting this feature from userspace may not be possible, since in uart_sanitize_serial_rs485() the passed RS485 configuration is matched against the supported features and unsupported settings are thereby removed and thus take no effect. Cc: <stable@vger.kernel.org> Fixes: 163f080eb717 ("serial: core: Add option to output RS485 RX_DURING_TX state via GPIO") Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20240103061818.564-3-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: Do not hold the port lock when setting rx-during-tx GPIOLino Sanfilippo
Both the imx and stm32 driver set the rx-during-tx GPIO in rs485_config(). Since this function is called with the port lock held, this can be a problem in case that setting the GPIO line can sleep (e.g. if a GPIO expander is used which is connected via SPI or I2C). Avoid this issue by moving the GPIO setting outside of the port lock into the serial core and thus making it a generic feature. Also with commit c54d48543689 ("serial: stm32: Add support for rs485 RX_DURING_TX output GPIO") the SER_RS485_RX_DURING_TX flag is only set if a rx-during-tx GPIO is _not_ available, which is wrong. Fix this, too. Furthermore reset old GPIO settings in case that changing the RS485 configuration failed. Fixes: c54d48543689 ("serial: stm32: Add support for rs485 RX_DURING_TX output GPIO") Fixes: ca530cfa968c ("serial: imx: Add support for RS485 RX_DURING_TX output GPIO") Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20240103061818.564-2-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: 8250_bcm2835aux: Restore clock error handlingStefan Wahren
The commit fcc446c8aa63 ("serial: 8250_bcm2835aux: Add ACPI support") dropped the error handling for clock acquiring. But even an optional clock needs this. Fixes: fcc446c8aa63 ("serial: 8250_bcm2835aux: Add ACPI support") Cc: stable <stable@kernel.org> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231220114334.4712-1-wahrenst@gmx.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-048250: microchip: pci1xxxx: Add Burst mode reception support in uart driver ↵Rengarajan S
for writing into FIFO In PCI1XXXX C0 endpoint, support for Burst mode is added. pci1xxxx_handle_irq checks the burst status and based on that incoming characters are received in DWORDs, RX handling is done in pci1xxxx_rx_burst. While reading the burst status the RX error is checked and the corresponding error statistics are updated. Signed-off-by: Rengarajan S <rengarajan.s@microchip.com> Link: https://lore.kernel.org/r/20231215151123.41812-4-rengarajan.s@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-048250: microchip: pci1xxxx: Add Syslock support for reading UART system registersRengarajan S
Different Host drivers can attempt to access system registers simultaneously from different memory spaces at the same time. The syslock mechanism provides a safe option for reading UART system registers and prevents conflicts by serializing access. Added three padding bytes in the structure for memory alignment. Signed-off-by: Rengarajan S <rengarajan.s@microchip.com> Link: https://lore.kernel.org/r/20231215151123.41812-3-rengarajan.s@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-048250: microchip: pci1xxxx: Rearranging the structure declarationsRengarajan S
Structure declarations in 8250_pci1xxxx.c have been moved above the functions for code readability. Signed-off-by: Rengarajan S <rengarajan.s@microchip.com> Link: https://lore.kernel.org/r/20231215151123.41812-2-rengarajan.s@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: 8250_lpss: copy dma_param using devm_kmemdup()Raag Jadav
Use devm_kmemdup() helper to copy dma_param instead of doing it manually. Signed-off-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20240102055006.27256-1-raag.jadav@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04tty: serial: 8250: Set RS232 as default for Moxa PCIe board initializationCrescent CY Hsieh
After switching the serial interface of the Moxa RS232 PCIe boards, it fails to reset to RS232 when attempting to reload 8250_pci driver. This patch set RS232 as the default setting during the initialization of Moxa PCIe board. Signed-off-by: Crescent CY Hsieh <crescentcy.hsieh@moxa.com> Link: https://lore.kernel.org/r/20240102053133.9795-1-crescentcy.hsieh@moxa.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: 8250_dw: Do not bailout on UCV read returning zeroVamshi Gajjela
Designware UART has optional feature FIFO_MODE to implement FIFO. Encoding FIFO capabilities through Component Parameter Register CPR is optional and it can be enabled using parameter UART_ADD_ENCODED_PARAMS. Driver can exercise fifo capabilities by decoding CPR if implemented or from cpr_val provided from the dw8250_platform_data otherwise. dw8250_setup_port() checks for CPR or cpr_val to determine FIFO size only when Component Version (UCV) is non-zero. Bailing out early on UCV read returning zero will leave fifosize as zero and !UART_CAP_FIFO, hence prevent early return and continue to process CPR or cpr_val for the driver to utilize FIFO. Non-zero UCV implies ADDITIONAL_FEATURES=1, preventing early return will not be an overhead here. Signed-off-by: Vamshi Gajjela <vamshigajjela@google.com> Link: https://lore.kernel.org/r/20231231182951.877805-1-vamshigajjela@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: imx: Ensure that imx_uart_rs485_config() is called with enabled clockChristoph Niedermaier
There are register accesses in the function imx_uart_rs485_config(). The clock must be enabled for these accesses. This was ensured by calling it via the function uart_rs485_config() in the probe() function within the range where the clock is enabled. With the commit 7c7f9bc986e6 ("serial: Deassert Transmit Enable on probe in driver-specific way") it was removed from the probe() function and is now only called through the function uart_add_one_port() which is located at the end of the probe() function. But the clock is already switched off in this area. To ensure that the clock is enabled during register access, move the disabling of the clock to the very end of the probe() function. To avoid leaking enabled clocks on error also add an error path for exiting with disabling the clock. Fixes: 7c7f9bc986e6 ("serial: Deassert Transmit Enable on probe in driver-specific way") Cc: stable <stable@kernel.org> Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/20231226113647.39376-1-cniedermaier@dh-electronics.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: apbuart: fix console prompt on qemuSam Ravnborg
When using a leon kernel with qemu there where no console prompt. The root cause is the handling of the fifo size in the tx part of the apbuart driver. The qemu uart driver only have a very rudimentary status handling and do not report the number of chars queued in the tx fifo in the status register. So the driver ends up with a fifo size of 1. In the tx path the fifo size is divided by 2 - resulting in a fifo size of zero. The original implementation would always try to send one char, but after the introduction of uart_port_tx_limited() the fifo size is respected even for the first char. There seems to be no good reason to divide the fifo size with two - so remove this. It looks like something copied from the original amba driver. With qemu we now have a minimum fifo size of one char, so we show the prompt. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Fixes: d11cc8c3c4b6 ("tty: serial: use uart_port_tx_limited()") Cc: Andreas Larsson <andreas@gaisler.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: <linux-serial@vger.kernel.org> Cc: <sparclinux@vger.kernel.org> Link: https://lore.kernel.org/r/20231226121607.GA2622970@ravnborg.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04tty: serial: kgdboc: Fix 8250_* kgdb over serialMichael Trimarchi
Check if port type is not PORT_UNKNOWN during poll_init. The kgdboc calls the tty_find_polling_driver that check if the serial is able to use poll_init. The poll_init calls the uart uart_poll_init that try to configure the uart with the selected boot parameters. The uart must be ready before setting parameters. Seems that PORT_UNKNOWN is already used by other functions in serial_core to detect uart status, so use the same to avoid to use it in invalid state. The crash happen for instance in am62x architecture where the 8250 register the platform driver after the 8250 core is initialized. Follow the report crash coming from KGDB Thread 2 received signal SIGSEGV, Segmentation fault. [Switching to Thread 1] _outb (addr=<optimized out>, value=<optimized out>) at ./include/asm-generic/io.h:584 584 __raw_writeb(value, PCI_IOBASE + addr); (gdb) bt This section of the code is too early because in this case the omap serial is not probed Thread 2 received signal SIGSEGV, Segmentation fault. [Switching to Thread 1] _outb (addr=<optimized out>, value=<optimized out>) at ./include/asm-generic/io.h:584 584 __raw_writeb(value, PCI_IOBASE + addr); (gdb) bt Thread 2 received signal SIGSEGV, Segmentation fault. [Switching to Thread 1] _outb (addr=<optimized out>, value=<optimized out>) at ./include/asm-generic/io.h:584 584 __raw_writeb(value, PCI_IOBASE + addr); (gdb) bt 0 _outb (addr=<optimized out>, value=<optimized out>) at ./include/asm-generic/io.h:584 1 logic_outb (value=0 '\000', addr=18446739675637874689) at lib/logic_pio.c:299 2 0xffff80008082dfcc in io_serial_out (p=0x0, offset=16760830, value=0) at drivers/tty/serial/8250/8250_port.c:416 3 0xffff80008082fe34 in serial_port_out (value=<optimized out>, offset=<optimized out>, up=<optimized out>) at ./include/linux/serial_core.h:677 4 serial8250_do_set_termios (port=0xffff8000828ee940 <serial8250_ports+1568>, termios=0xffff80008292b93c, old=0x0) at drivers/tty/serial/8250/8250_port.c:2860 5 0xffff800080830064 in serial8250_set_termios (port=0xfffffbfffe800000, termios=0xffbffe, old=0x0) at drivers/tty/serial/8250/8250_port.c:2912 6 0xffff80008082571c in uart_set_options (port=0xffff8000828ee940 <serial8250_ports+1568>, co=0x0, baud=115200, parity=110, bits=8, flow=110) at drivers/tty/serial/serial_core.c:2285 7 0xffff800080828434 in uart_poll_init (driver=0xfffffbfffe800000, line=16760830, options=0xffff8000828f7506 <config+6> "115200n8") at drivers/tty/serial/serial_core.c:2656 8 0xffff800080801690 in tty_find_polling_driver (name=0xffff8000828f7500 <config> "ttyS2,115200n8", line=0xffff80008292ba90) at drivers/tty/tty_io.c:410 9 0xffff80008086c0b0 in configure_kgdboc () at drivers/tty/serial/kgdboc.c:194 10 0xffff80008086c1ec in kgdboc_probe (pdev=0xfffffbfffe800000) at drivers/tty/serial/kgdboc.c:249 11 0xffff8000808b399c in platform_probe (_dev=0xffff000000ebb810) at drivers/base/platform.c:1404 12 0xffff8000808b0b44 in call_driver_probe (drv=<optimized out>, dev=<optimized out>) at drivers/base/dd.c:579 13 really_probe (dev=0xffff000000ebb810, drv=0xffff80008277f138 <kgdboc_platform_driver+48>) at drivers/base/dd.c:658 14 0xffff8000808b0d2c in __driver_probe_device (drv=0xffff80008277f138 <kgdboc_platform_driver+48>, dev=0xffff000000ebb810) at drivers/base/dd.c:800 15 0xffff8000808b0eb8 in driver_probe_device (drv=0xfffffbfffe800000, dev=0xffff000000ebb810) at drivers/base/dd.c:830 16 0xffff8000808b0ff4 in __device_attach_driver (drv=0xffff80008277f138 <kgdboc_platform_driver+48>, _data=0xffff80008292bc48) at drivers/base/dd.c:958 17 0xffff8000808ae970 in bus_for_each_drv (bus=0xfffffbfffe800000, start=0x0, data=0xffff80008292bc48, fn=0xffff8000808b0f3c <__device_attach_driver>) at drivers/base/bus.c:457 18 0xffff8000808b1408 in __device_attach (dev=0xffff000000ebb810, allow_async=true) at drivers/base/dd.c:1030 19 0xffff8000808b16d8 in device_initial_probe (dev=0xfffffbfffe800000) at drivers/base/dd.c:1079 20 0xffff8000808af9f4 in bus_probe_device (dev=0xffff000000ebb810) at drivers/base/bus.c:532 21 0xffff8000808ac77c in device_add (dev=0xfffffbfffe800000) at drivers/base/core.c:3625 22 0xffff8000808b3428 in platform_device_add (pdev=0xffff000000ebb800) at drivers/base/platform.c:716 23 0xffff800081b5dc0c in init_kgdboc () at drivers/tty/serial/kgdboc.c:292 24 0xffff800080014db0 in do_one_initcall (fn=0xffff800081b5dba4 <init_kgdboc>) at init/main.c:1236 25 0xffff800081b0114c in do_initcall_level (command_line=<optimized out>, level=<optimized out>) at init/main.c:1298 26 do_initcalls () at init/main.c:1314 27 do_basic_setup () at init/main.c:1333 28 kernel_init_freeable () at init/main.c:1551 29 0xffff8000810271ec in kernel_init (unused=0xfffffbfffe800000) at init/main.c:1441 30 0xffff800080015e80 in ret_from_fork () at arch/arm64/kernel/entry.S:857 Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Link: https://lore.kernel.org/r/20231224131200.266224-1-michael@amarulasolutions.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: imx: Correct clock error message in function probe()Christoph Niedermaier
Correct the clock error message by changing the clock name. Fixes: 1e512d45332b ("serial: imx: add error messages when .probe fails") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231224093209.2612-1-cniedermaier@dh-electronics.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04tty/serial: altera_uart: use more informative labels in /proc/interruptsAntony Pavlov
Prior to this patch: ~# cat /proc/interrupts ... 40: 123 0 GIC-0 72 Level altera_uart 41: 9 0 GIC-0 73 Level altera_uart After this patch: ~# cat /proc/interrupts ... 40: 6 0 GIC-0 72 Level ff200100.fpga-uart0 41: 28 0 GIC-0 73 Level ff200200.fpga-uart1 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Acked-by: Tobias Klauser <tklauser@distanz.ch> Link: https://lore.kernel.org/r/20231217195601.236002-1-antonynpavlov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04tty: serial: Add RS422 flag to struct serial_rs485Crescent CY Hsieh
Add "SER_RS485_MODE_RS422" flag to struct serial_rs485, so that serial port can switch interface into RS422 if supported by using ioctl command "TIOCSRS485". By treating RS422 as a mode of RS485, which means while enabling RS422 there are two flags need to be set (SER_RS485_ENABLED and SER_RS485_MODE_RS422), it would make things much easier. For example some places that checks for "SER_RS485_ENABLED" won't need to be rewritten. Signed-off-by: Crescent CY Hsieh <crescentcy.hsieh@moxa.com> Link: https://lore.kernel.org/r/20231201071554.258607-3-crescentcy.hsieh@moxa.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: core: Clean up uart_update_timeout() functionVamshi Gajjela
Rename the variable size to temp and change its data type from unsigned int to u64 to avoid type casting in multiplication. Remove the intermediate variable frame_time and use temp instead to accommodate the nanoseconds(ns). port->frame_time is an unsigned int, therefore an explicit cast is used to improve readability. Having said this unsigned int is sufficinet to hold frame time duration in nanoseconds for all the standard baudrates. Consider 9600 baud, it takes 1/9600 seconds for one bit, for a total of 10 bits (start, 8-bit data, stop) 10/9600=1.04 ms for 1 byte transfer, frame_time here is 1041667ns. As baudrate increases frame_time decreases, say for 115200 baud it is 86806ns. To avoid costly 64-bit arithmetic we do not upconvert the type for variable frame_time as overflow happens for extremely low baudrates which are impractical and are not used in real-world applications. Signed-off-by: Vamshi Gajjela <vamshigajjela@google.com> Link: https://lore.kernel.org/r/20231109063417.3971005-3-vamshigajjela@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04xhci: add support to allocate several interruptersMathias Nyman
Modify the XHCI drivers to accommodate for handling multiple event rings in case there are multiple interrupters. Add the required APIs so clients are able to allocate/request for an interrupter ring, and pass this information back to the client driver. This allows for users to handle the resource accordingly, such as passing the event ring base address to an audio DSP. There is no actual support for multiple MSI/MSI-X vectors. [export xhci_initialize_ring_info() -wcheng] Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20240102214549.22498-2-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04USB: core: Use device_driver directly in struct usb_driver and usb_device_driverYajun Deng
There is usbdrv_wrap in struct usb_driver and usb_device_driver, it contains device_driver and for_devices. for_devices is used to distinguish between device drivers and interface drivers. Like the is_usb_device(), it tests the type of the device. We can test that if the probe of device_driver is equal to usb_probe_device in is_usb_device_driver(), and then the struct usbdrv_wrap is no longer needed. Clean up struct usbdrv_wrap, use device_driver directly in struct usb_driver and usb_device_driver. This makes the code cleaner. Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20240104032822.1896596-1-yajun.deng@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04usb: xhci-mtk: fix a short packet issue of gen1 isoc-in transferChunfeng Yun
For Gen1 isoc-in transfer, host still send out unexpected ACK after device finish the burst with a short packet, this will cause an exception on the connected device, such as, a usb 4k camera. It can be fixed by setting rxfifo depth less than 4k bytes, prefer to use 3k here, the side-effect is that may cause performance drop about 10%, including bulk transfer. Fixes: 926d60ae64a6 ("usb: xhci-mtk: modify the SOF/ITP interval for mt8195") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20240104061640.7335-2-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04usb: dwc3: qcom: Rename hs_phy_irq to qusb2_phy_irqKrishna Kurapati
For wakeup to work, driver needs to enable interrupts that depict what is happening on the DP/DM lines. On QUSB targets, this is identified by qusb2_phy whereas on SoCs using Femto PHY, separate {dp,dm}_hs_phy_irq's are used instead. The implementation incorrectly names qusb2_phy interrupts as "hs_phy_irq". Clean this up so that driver would be using only qusb2/(dp & dm) for wakeup purposes. For devices running older kernels, this won't break any functionality because the interrupt configurations in QUSB2 PHY based SoCs is done by configuring QUSB2PHY_INTR_CTRL register in PHY address space and it was never armed properly right from the start. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20231227091951.685-3-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04usb: gadget: u_ether: Re-attach netif device to mirror detachmentRichard Acayan
In 6.7-rc1, there was a netif_device_detach call added to the gether_disconnect function. This clears the __LINK_STATE_PRESENT bit of the netif device and suppresses pings (ICMP messages) and TCP connection requests from the connected host. If userspace temporarily disconnects the gadget, such as by temporarily removing configuration in the gadget configfs interface, network activity should continue to be processed when the gadget is re-connected. Mirror the netif_device_detach call with a netif_device_attach call in gether_connect to fix re-connecting gadgets. Link: https://gitlab.com/postmarketOS/pmaports/-/tree/6002e51b7090aeeb42947e0ca7ec22278d7227d0/main/postmarketos-base-ui/rootfs-usr-lib-NetworkManager-dispatcher.d-50-tethering.sh Cc: stable <stable@kernel.org> Fixes: f49449fbc21e ("usb: gadget: u_ether: Replace netif_stop_queue with netif_device_detach") Signed-off-by: Richard Acayan <mailingradian@gmail.com> Tested-by: Luca Weiss <luca@z3ntu.xyz> Tested-by: Duje Mihanović <duje.mihanovic@skole.hr> Link: https://lore.kernel.org/r/20231218164532.411125-2-mailingradian@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04usb: dwc3: gadget: Queue PM runtime idle on disconnect eventWesley Cheng
There is a scenario where DWC3 runtime suspend is blocked due to the dwc->connected flag still being true while PM usage_count is zero after DWC3 giveback is completed and the USB gadget session is being terminated. This leads to a case where nothing schedules a PM runtime idle for the device. The exact condition is seen with the following sequence: 1. USB bus reset is issued by the host 2. Shortly after, or concurrently, a USB PD DR SWAP request is received (sink->source) 3. USB bus reset event handler runs and issues dwc3_stop_active_transfers(), and pending transfer are stopped 4. DWC3 usage_count decremented to 0, and runtime idle occurs while dwc->connected == true, returns -EBUSY 5. DWC3 disconnect event seen, dwc->connected set to false due to DR swap handling 6. No runtime idle after this point Address this by issuing an asynchronous PM runtime idle call after the disconnect event is completed, as it modifies the dwc->connected flag, which is what blocks the initial runtime idle. Fixes: fc8bb91bc83e ("usb: dwc3: implement runtime PM") Cc: <stable@vger.kernel.org> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20240103214946.2596-1-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04usb: phy: mxs: remove CONFIG_USB_OTG condition for mxs_phy_is_otg_host()Xu Yang
When CONFIG_USB_OTG is not set, mxs_phy_is_otg_host() will always return false. This behaviour is wrong. Since phy.last_event will always be set for either host or device mode. Therefore, CONFIG_USB_OTG condition can be removed. Fixes: 5eda42aebb76 ("usb: phy: mxs: fix getting wrong state with mxs_phy_is_otg_host()") cc: <stable@vger.kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20231228110753.1755756-3-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04usb: chipidea: wait controller resume finished for wakeup irqXu Yang
After the chipidea driver introduce extcon for id and vbus, it's able to wakeup from another irq source, in case the system with extcon ID cable, wakeup from usb ID cable and device removal, the usb device disconnect irq may come firstly before the extcon notifier while system resume, so we will get 2 "wakeup" irq, one for usb device disconnect; and one for extcon ID cable change(real wakeup event), current driver treat them as 2 successive wakeup irq so can't handle it correctly, then finally the usb irq can't be enabled. This patch adds a check to bypass further usb events before controller resume finished to fix it. Fixes: 1f874edcb731 ("usb: chipidea: add runtime power management support") cc: <stable@vger.kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/20231228110753.1755756-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04usb: chipidea: ci_hdrc_imx: add wakeup clock and keep it always onXu Yang
Some platform using ChipIdea IP may keep 32KHz wakeup clock always on without usb driver intervention. And some may need driver to handle this clock. For now only i.MX93 needs this wakeup clock. This patch will get wakeup clock and keep it always on to make controller work properly. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Tested-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20231228110753.1755756-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04Revert "usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind()"Frank Li
This reverts commit 3c5b006f3ee800b4bd9ed37b3a8f271b8560126e. gadget_is_{super|dual}speed() API check UDC controller capitblity. It should pass down highest speed endpoint descriptor to UDC controller. So UDC controller driver can reserve enough resource at check_config(), especially mult and maxburst. So UDC driver (such as cdns3) can know need at least (mult + 1) * (maxburst + 1) * wMaxPacketSize internal memory for this uvc functions. Cc: <stable@vger.kernel.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20231224153816.1664687-5-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04usb: cdns3: Fix uvc fail when DMA cross 4k boundery since sg enabledFrank Li
Supposed DMA cross 4k bounder problem should be fixed at DEV_VER_V2, but still met problem when do ISO transfer if sg enabled. Data pattern likes below when sg enabled, package size is 1k and mult is 2 [UVC Header(8B) ] [data(3k - 8)] ... The received data at offset 0xd000 will get 0xc000 data, len 0x70. Error happen position as below pattern: 0xd000: wrong 0xe000: wrong 0xf000: correct 0x10000: wrong 0x11000: wrong 0x12000: correct ... To avoid DMA cross 4k bounder at ISO transfer, reduce burst len according to start DMA address's alignment. Cc: <stable@vger.kernel.org> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20231224153816.1664687-4-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04usb: cdns3: fix iso transfer error when mult is not zeroFrank Li
ISO basic transfer is ITP(SOF) Package_0 Package_1 ... Package_n CDNS3 DMA start dma transfer from memmory to internal FIFO when get SOF, controller will transfer data to usb bus from internal FIFO when get IN token. According USB spec defination: Maximum number of packets = (bMaxBurst + 1) * (Mult + 1) Internal memory should be the same as (bMaxBurst + 1) * (Mult + 1). DMA don't fetch data advance when ISO transfer, so only reserve (bMaxBurst + 1) * (Mult + 1) internal memory for ISO transfer. Need save Mult and bMaxBurst information and set it into EP_CFG register, otherwise only 1 package is sent by controller, other package will be lost. Cc: <stable@vger.kernel.org> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20231224153816.1664687-3-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04usb: cdns3: fix uvc failure work since sg support enabledFrank Li
When IP version >= DEV_VER_V2, gadget:sg_supported is true. So uvc gadget function driver will use sg to equeue data, first is 8bytes header, the second is 1016bytes data. cdns3_prepare_trb: ep2in: trb 0000000000ac755f, dma buf: 0xbf455000, size: 8, burst: 128 ctrl: 0x00000415 (C=1, T=0, ISP, CHAIN, Normal) cdns3_prepare_trb: ep2in: trb 00000000a574e693, dma buf: 0xc0200fe0, size: 1016, burst: 128 ctrl: 0x00000405 (C=1, T=0, ISP, Normal) But cdns3_ep_run_transfer() can't correctly handle this case, which only support one TRB for ISO transfer. The controller requires duplicate the TD for each SOF if priv_ep->interval is not 1. DMA will read data from DDR to internal FIFO when get SOF. Send data to bus when receive IN token. DMA always refill FIFO when get SOF regardless host send IN token or not. If host send IN token later, some frames data will be lost. Fixed it by below major steps: 1. Calculate numembers of TRB base on sg_nums and priv_ep->interval. 2. Remove CHAIN flags for each end TRB of TD when duplicate TD. 3. The controller requires LINK TRB must be first TRB of TD. When check there are not enough TRBs lefts, just fill LINK TRB for left TRBs. .... CHAIN_TRB DATA_TRB, CHAIN_TRB DATA_TRB, LINK_TRB ... LINK_TRB ^End of TRB List Cc: <stable@vger.kernel.org> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20231224153816.1664687-2-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04usb: gadget: ncm: Add support to update wMaxSegmentSize via configfsKrishna Kurapati
The max segment size is currently limited to the ethernet frame length of the kernel which happens to be 1514 at this point in time. However the NCM specification limits it to 64K for sixtenn bit NTB's. For peer to peer connections, increasing the segment size gives better throughput. Add support to configure this value before configfs symlink is created. Also since the NTB Out/In buffer sizes are fixed at 16384 bytes, limit the segment size to an upper cap of 8000 to allow at least a minimum of 2 MTU sized datagrams to be aggregated. Set the default MTU size for the ncm interface during function bind before network interface is registered allowing MTU to be set in parity with wMaxSegmentSize. Update gadget documentation describing the new configfs property. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Link: https://lore.kernel.org/r/20231221153216.18657-1-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04usb: dwc3: set pm runtime active before resume commonFrank Wang
For device mode, if PM runtime autosuspend feature enabled, the runtime power status of dwc3 may be suspended when run dwc3_resume(), and dwc3 gadget would not be configured in dwc3_gadget_run_stop(). It would cause gadget connected failed if USB cable has been plugged before PM resume. So move forward pm_runtime_set_active() to fix it. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Link: https://lore.kernel.org/r/20231206065939.16958-1-frank.wang@rock-chips.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04usb: dwc3: Support EBC feature of DWC_usb31Manan Aurora
Support configuration and use of bulk endpoints in the so-called EBC mode described in the DBC_usb31 databook (appendix E) Added a bit fifo_mode to usb_ep to indicate to the UDC driver that a specific endpoint is to operate in the EBC (or equivalent) mode when enabled Added macros for bits 15 and 14 of DEPCFG parameter 1 to indicate EBC mode and write back behaviour. These bits will be set to 1 when configuring an EBC endpoint as described in the programming guide Signed-off-by: Manan Aurora <maurora@google.com> Link: https://lore.kernel.org/r/20231031034641.660606-1-maurora@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04usb: typec: tcpm: Support multiple capabilitiesKyle Tso
Refactor tcpm_fw_get_caps to support the multiple pd capabilities got from fwnode. For backward compatibility, the original single capability is still applicable. The fetched data is stored in the newly defined structure "pd_data" and there is an array "pd_list" to store the pointers to them. A dedicated array "pds" is used to store the handles of the registered usb_power_delivery instances. Also implement the .pd_get and .pd_set ops which are introduced in commit a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners"). Once the .pd_set is called, the current capability will be updated and state machine will re-negotiate the power contract if possible. Signed-off-by: Kyle Tso <kyletso@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20231216104630.2720818-3-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-14 21:39:13 +0000