summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-05-29gpio: fix locking open drain IRQ linesLinus Walleij
We provided the right semantics on open drain lines being by definition output but incidentally the irq set up function would only allow IRQs on lines that were "not output". Fix the semantics to allow output open drain lines to be used for IRQs. Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Hans Verkuil <hverkuil@xs4all.nl> Cc: Russell King <linux@armlinux.org.uk> Cc: stable@vger.kernel.org # v5.3+ Link: https://lore.kernel.org/r/20200527140758.162280-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-29tty: serial: qcom_geni_serial: Add 51.2MHz frequency supportsatya priya
To support BT use case over UART at baud rate of 3.2 Mbps, we need SE clocks to run at 51.2MHz frequency. Previously this frequency was not available in clk src, so, we were requesting for 102.4 MHz and dividing it internally by 2 to get 51.2MHz. As now 51.2MHz frequency is made available in clk src, adding this frequency to UART frequency table. We will save significant amount of power, if 51.2 is used because it belongs to LowSVS range whereas 102.4 fall into Nominal category. Signed-off-by: satya priya <skakit@codeaurora.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/1590747282-5487-1-git-send-email-skakit@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-29Bluetooth: btmtkuart: Improve exception handling in btmtuart_probe()Chuhong Yuan
Calls of the functions clk_disable_unprepare() and hci_free_dev() were missing for the exception handling. Thus add the missed function calls together with corresponding jump targets. Fixes: 055825614c6b ("Bluetooth: btmtkuart: add an implementation for clock osc property") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-29Bluetooth: hci_qca: Fix suspend/resume functionality failureZijun Hu
@dev parameter of qca_suspend()/qca_resume() represents serdev_device, but it is mistook for hci_dev and causes succedent unexpected memory access. Fix by taking @dev as serdev_device. Fixes: 41d5b25fed0 ("Bluetooth: hci_qca: add PM support") Signed-off-by: Zijun Hu <zijuhu@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-29tty: serial: imx: clear Ageing Timer Interrupt in handlerMatthias Schiffer
The AGTIM flag must be cleared explicitly, otherwise the IRQ handler will be called in an endless loop. Fortunately, this issue currently doesn't affect mainline kernels in practice, as the the RX FIFO trigger level is set to 1 in UFCR. When setting the trigger level to a higher number, the issue is trivially reproducible by any RX without DMA that doesn't fill the FIFO up to the configured level. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20200528154747.14201-1-matthias.schiffer@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-29serial: 8250_fintek: Add F81966 SupportJi-Ze Hong (Peter Hong)
Fintek F81966 is a LPC/eSPI to 6 UARTs SuperIO. It has fully compatible with F81866. It's also need check the IRQ mode with system assigned. F81966 IRQ Mode setting: 0xf0 Bit1: IRQ_MODE0 Bit0: Share mode (always on) 0xf6 Bit3: IRQ_MODE1 Level/Low: IRQ_MODE0:0, IRQ_MODE1:0 Edge/High: IRQ_MODE0:1, IRQ_MODE1:0 Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Cc: Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw> Link: https://lore.kernel.org/r/20200528022429.32078-1-hpeter+linux_kernel@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-29sc16is7xx: Add flag to activate IrDA modePascal Huerst
This series of uart controllers is able to work in IrDA mode. Add per-port flag to the device-tree to enable that feature if needed. Signed-off-by: Pascal Huerst <pascal.huerst@gmail.com> Signed-off-by: Daniel Mack <daniel@zonque.org> Link: https://lore.kernel.org/r/20200529055058.1606910-3-daniel@zonque.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-29serial: 8250: Support rs485 bus termination GPIOLukas Wunner
Commit e8759ad17d41 ("serial: uapi: Add support for bus termination") introduced the ability to enable rs485 bus termination from user space. So far the feature is only used by a single driver, 8250_exar.c, using a hardcoded GPIO pin specific to Siemens IOT2040 products. Provide for a more generic solution by allowing specification of an rs485 bus termination GPIO pin in the device tree: Amend the serial core to retrieve the GPIO from the device tree (or ACPI table) and amend the default ->rs485_config() callback for 8250 drivers to change the GPIO on request from user space. Perhaps 8250_exar.c can be converted to the generic approach in a follow-up patch. Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Link: https://lore.kernel.org/r/94c6c800d1ca9fa04766dd1d43a8272c5ad4bedd.1589811297.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-29serial: 8520_port: Fix function param documentationHeiko Stuebner
The parameter is named p while the documentation talks about up. Fix the doc to be in line with the code. Fixes: 058bc104f7ca ("serial: 8250: Generalize rs485 software emulation") Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200517215610.2131618-2-heiko@sntech.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-29mmc: core: Export device/vendor ids from Common CIS for SDIO cardsPali Rohár
Device/vendor ids from Common CIS (Card Information Structure) may be different as device/vendor ids from CIS on particular SDIO function. Kernel currently exports only device/vendor ids from SDIO functions and not "main" device/vendor ids from Common CIS. This patch exports "main" device/vendor ids for SDIO and SD combo cards at top level mmc device in sysfs hierarchy. Userspace can use e.g. udev rules to correctly match whole SDIO card based on Common CIS device/vendor id and not only one particular SDIO function. Having this information in userspace also helps developers to debug whole SDIO card as e.g. kernel mmc quirks use device/vendor ids from Common CIS and not from particular SDIO function. Also it allows to write userspace applications which list all connected SDIO cards based on CIS ids. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Link: https://lore.kernel.org/r/20200527110858.17504-2-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-29mmc: core: Do not export MMC_NAME= and MODALIAS=mmc:block for SDIO cardsPali Rohár
SDIO non-combo cards are not handled by mmc_block driver and do not have accessible CID register which is used for MMC_NAME= construction. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Link: https://lore.kernel.org/r/20200527110858.17504-1-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-29mmc: sdhci-of-at91: fix CALCR register being rewrittenEugen Hristev
When enabling calibration at reset, the CALCR register was completely rewritten. This may cause certain bits being deleted unintentedly. Fix by issuing a read-modify-write operation. Fixes: 727d836a375a ("mmc: sdhci-of-at91: add DT property to enable calibration on full reset") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lore.kernel.org/r/20200527105659.142560-1-eugen.hristev@microchip.com Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-29mmc: sdhci-esdhc-imx: disable the CMD CRC check for standard tuningHaibo Chen
In current code, we add 1ms dealy after each tuning command for standard tuning method. Adding this 1ms dealy is because USDHC default check the CMD CRC and DATA line. If detect the CMD CRC, USDHC standard tuning IC logic do not wait for the tuning data sending out by the card, trigger the buffer read ready interrupt immediately, and step to next cycle. So when next time the new tuning command send out by USDHC, card may still not send out the tuning data of the upper command，then some eMMC cards may stuck, can't response to any command, block the whole tuning procedure. If do not check the CMD CRC for tuning, then do not has this issue. USDHC will wait for the tuning data of each tuning command and check them. If the tuning data pass the check, it also means the CMD line also okay for tuning. So this patch disable the CMD CRC check for tuning, save some time for the whole tuning procedure. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/1590488522-9292-2-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-29mmc: sdhci-esdhc-imx: fix the mask for tuning start pointHaibo Chen
According the RM, the bit[6~0] of register ESDHC_TUNING_CTRL is TUNING_START_TAP, bit[7] of this register is to disable the command CRC check for standard tuning. So fix it here. Fixes: d87fc9663688 ("mmc: sdhci-esdhc-imx: support setting tuning start point") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/1590488522-9292-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-29mmc: host: sdhci-esdhc-imx: add wakeup feature for GPIO CD pinHaibo Chen
When use the specific GPIO to detect the card insert/remove, we can also add the GPIO as a wakeup source. When system suspend, insert or remove the card can wakeup the system. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/1590547175-15070-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-29mmc: mmci_sdmmc: fix DMA API warning max segment sizeLudovic Barre
Turning on CONFIG_DMA_API_DEBUG_SG results in the following warning: WARNING: CPU: 1 PID: 85 at kernel/dma/debug.c:1302 debug_dma_map_sg+0x2a0/0x3cc mmci-pl18x 58005000.sdmmc: DMA-API: mapping sg segment longer than device claims to support [len=126976] [max=65536] dma api debug checks and compares the segment size to dma_get_max_seg_size (dev->dma_parms->max_segment_size), the sdmmc variant has an internal DMA and should define its max_segment_size constraint to avoid this warning. This Patch defines the dev->dma_parms->max_segment_size with the constraint already set for mmc core (host->mmc->max_seg_size). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200526155103.12514-3-ludovic.barre@st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-29mmc: mmci_sdmmc: fix DMA API warning overlapping mappingsLudovic Barre
Turning on CONFIG_DMA_API_DEBUG_SG results in the following warning: WARNING: CPU: 1 PID: 20 at kernel/dma/debug.c:500 add_dma_entry+0x16c/0x17c DMA-API: exceeded 7 overlapping mappings of cacheline 0x031d2645 Modules linked in: CPU: 1 PID: 20 Comm: kworker/1:1 Not tainted 5.5.0-rc2-00021-gdeda30999c2b-dirty #49 Hardware name: STM32 (Device Tree Support) Workqueue: events_freezable mmc_rescan [<c03138c0>] (unwind_backtrace) from [<c030d760>] (show_stack+0x10/0x14) [<c030d760>] (show_stack) from [<c0f2eb28>] (dump_stack+0xc0/0xd4) [<c0f2eb28>] (dump_stack) from [<c034a14c>] (__warn+0xd0/0xf8) [<c034a14c>] (__warn) from [<c034a530>] (warn_slowpath_fmt+0x94/0xb8) [<c034a530>] (warn_slowpath_fmt) from [<c03bca0c>] (add_dma_entry+0x16c/0x17c) [<c03bca0c>] (add_dma_entry) from [<c03bdf54>] (debug_dma_map_sg+0xe4/0x3d4) [<c03bdf54>] (debug_dma_map_sg) from [<c0d09244>] (sdmmc_idma_prep_data+0x94/0xf8) [<c0d09244>] (sdmmc_idma_prep_data) from [<c0d05a2c>] (mmci_prep_data+0x2c/0xb0) [<c0d05a2c>] (mmci_prep_data) from [<c0d073ec>] (mmci_start_data+0x134/0x2f0) [<c0d073ec>] (mmci_start_data) from [<c0d078d0>] (mmci_request+0xe8/0x154) [<c0d078d0>] (mmci_request) from [<c0cecb44>] (mmc_start_request+0x94/0xbc) DMA api debug brings to light leaking dma-mappings, dma_map_sg and dma_unmap_sg are not correctly balanced. If a request is prepared, the dma_map/unmap are done in asynchronous call pre_req (prep_data) and post_req (unprep_data). In this case the dma-mapping is right balanced. But if the request was not prepared, the data->host_cookie is define to zero and the dma_map/unmap must be done in the request. The dma_map is called by mmci_dma_start (prep_data), but there is no dma_unmap in this case. This patch adds dma_unmap_sg when the dma is finalized and the data cookie is zero (request not prepared). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200526155103.12514-2-ludovic.barre@st.com Fixes: 46b723dd867d ("mmc: mmci: add stm32 sdmmc variant") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-29mmc: sdhci-of-arasan: Add support for Intel Keem BayWan Ahmad Zainie
Intel Keem Bay SoC eMMC/SD/SDIO controller is based on Arasan SD 3.0 / eMMC 5.1 host controller IP. However, it does not support 64-bit access as its AXI interface has 32-bit address ports. Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200526062758.17642-3-wan.ahmad.zainie.wan.mohamad@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-29mmc: sdhci-cadence: fix PHY writeVladimir Kondratiev
Accordingly to Cadence documentation, PHY write procedure is: 1. Software sets the PHY Register Address (HRS04[5:0]) and the PHY Write Data (HRS04[15:8]) fields. 2. Software sets the PHY Write Transaction Request (HRS04[24]) field to 1. 3. Software waits as the PHY Write Transaction Acknowledge (HRS04[26]) field is equal to 0. 4. Hardware performs the write transaction to PHY register where HRS04[15:8] is a data written to register under HRS04[5:0] address. 5. Hardware sets the PHY Transaction Acknowledge (HRS04[26]) to 1 when transaction is completed. 6. Software clears the PHY Write Transaction Request (HRS04[24]) to 1 after noticing that the PHY Write Transaction Acknowledge (HRS04[26]) field is equal to 1. 7. Software waits for the PHY Acknowledge Register (HRS04[26]) field is equal to 0. Add missing steps 3 and 7. Lack of these steps causes integrity errors detested by hardware. Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@intel.com> Link: https://lore.kernel.org/r/20200525074053.7309-1-vladimir.kondratiev@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-29mmc: sdio: Fix Cypress SDIO IDs macros in common include filePali Rohár
All macro names for SDIO device IDs are prefixed by vendor name to which device ID belongs. So for consistency add Broadcom string vendor prefix to all Cypress macro names as they belong to SDIO Broadcom vendor ID. Change also Cypress 43012 value from decimal do hexadecimal notation to be consistent with all other values. Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200522144412.19712-11-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-29mmc: sdio: Move SDIO IDs from b43-sdio driver to common include filePali Rohár
Define appropriate macro names for consistency with other macros. Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200522144412.19712-10-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-29mmc: sdio: Move SDIO IDs from ath10k driver to common include filePali Rohár
Also replace generic MANUFACTURER macros by proper SDIO IDs macros. Checks for device IDs are slightly modified to use SDIO device IDs. This allows removal of all custom MANUFACTURER macros from ath10k. Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200522144412.19712-9-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-29mmc: sdio: Move SDIO IDs from ath6kl driver to common include filePali Rohár
Also replace generic MANUFACTURER macros by proper SDIO IDs macros. Check for "AR6003 or later" is slightly modified to use SDIO device IDs. This allows removal of all custom MANUFACTURER macros from ath6kl. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200522144412.19712-8-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-29mmc: sdio: Move SDIO IDs from smssdio driver to common include filePali Rohár
Define appropriate macro names for consistency with other Siano macros. Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200522144412.19712-7-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-29mmc: sdio: Move SDIO IDs from btmtksdio driver to common include filePali Rohár
Define appropriate macro names for consistency with other macros. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20200522144412.19712-6-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
2020-05-29mmc: sdio: Move SDIO IDs from btmrvl driver to common include filePali Rohár
Define appropriate macro names for consistency with other Marvell macros. Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200522144412.19712-5-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
2020-05-29mmc: sdio: Move SDIO IDs from mwifiex driver to common include filePali Rohár
Add _WLAN suffix to macro names for consistency with other Marvell macros. These IDs represents wlan function of combo bt/wlan cards. Other functions of these cards have different IDs. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200522144412.19712-4-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
2020-05-29mmc: sdio: Change macro names for Marvell 8688 modulesPali Rohár
Add underscore as separator in Marvell 8688 macro names for better readability and consistency. Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200522144412.19712-3-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
2020-05-29staging: rtl8723bs: Use common packet header constantsPascal Terjan
This driver contains a local version of the rfc1042 header and bridge tunnel header constants which are available from cfg80211.h, switch to those. Signed-off-by: Pascal Terjan <pterjan@google.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200527205100.35794-1-pterjan@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-29staging: sm750fb: Add names to proc_setBLANK argsIgor Ribeiro Barbosa Duarte
Add names to proc_setBLANK args. Found using checkpatch.pl. Signed-off-by: Igor Ribeiro Barbosa Duarte <igor.ribeiro.duarte@gmail.com> Link: https://lore.kernel.org/r/20200526224750.GA29722@igor-Aspire-F5-573G Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-29staging: most: usb: init return value in default path of switch/case expressionChristian Gromm
This patch avoids returning an uninitialized value in the default path of the switch expression. Signed-off-by: Christian Gromm <christian.gromm@microchip.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/1590669703-20004-1-git-send-email-christian.gromm@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-29PCI: tegra194: Fix runtime PM imbalance on errorDinghao Liu
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Link: https://lore.kernel.org/r/20200521031355.7022-1-dinghao.liu@zju.edu.cn Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Vidya Sagar <vidyas@nvidia.com>
2020-05-29usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCsMartin Blumenstingl
dwc3_meson_g12a_usb2_init_phy() crashes with NULL pointer on an SM1 board (which uses the same USB setup as G12A) dereference as reported by the Kernel CI bot. This is because of the following call flow: dwc3_meson_g12a_probe priv->drvdata->setup_regmaps dwc3_meson_g12a_setup_regmaps priv->usb2_ports is still 0 so priv->u2p_regmap[i] will be NULL dwc3_meson_g12a_get_phys initializes priv->usb2_ports priv->drvdata->usb_init dwc3_meson_g12a_usb_init dwc3_meson_g12a_usb_init_glue dwc3_meson_g12a_usb2_init priv->drvdata->usb2_init_phy dwc3_meson_g12a_usb2_init_phy dereferences priv->u2p_regmap[i] Call priv->drvdata->setup_regmaps only after dwc3_meson_g12a_get_phys so priv->usb2_ports is initialized and the regmaps will be set up correctly. This fixes the NULL dereference later on. Fixes: 013af227f58a97 ("usb: dwc3: meson-g12a: handle the phy and glue registers separately") Reported-by: "kernelci.org bot" <bot@kernelci.org> Acked-by: Felipe Balbi <balbi@kernel.org> Acked-by: Neil Armstrong <narmstron@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20200526202943.715220-3-martin.blumenstingl@googlemail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-29usb: dwc3: meson-g12a: fix error path when fetching the reset line failsMartin Blumenstingl
Disable and unprepare the clocks when devm_reset_control_get_shared() fails. This fixes the error path as this must disable the clocks which were previously enabled. Fixes: 1e355f21d3fb96 ("usb: dwc3: Add Amlogic A1 DWC3 glue") Cc: Yue Wang <yue.wang@amlogic.com> Cc: Hanjie Lin <hanjie.lin@amlogic.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20200526202943.715220-2-martin.blumenstingl@googlemail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-29Merge tag 'gnss-5.8-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss into char-misc-next Johan writes: GNSS updates for 5.8-rc1 Here are the GNSS updates for 5.8-rc1, including: - a fix for two broken probe errors paths in the sirf driver - a flexible array conversion Both have been in linux-next with no reported issues. * tag 'gnss-5.8-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss: gnss: replace zero-length array with flexible-array gnss: sirf: fix error return code in sirf_probe()
2020-05-29irqchip: Add Loongson PCH MSI controllerJiaxun Yang
This controller appears on Loongson LS7A family of PCH to transform interrupts from PCI MSI into HyperTransport vectorized interrrupts and send them to procrssor's HT vector controller. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200528152757.1028711-6-jiaxun.yang@flygoat.com
2020-05-29irqchip: Add Loongson PCH PIC controllerJiaxun Yang
This controller appears on Loongson LS7A family of PCH to transform interrupts from devices into HyperTransport vectorized interrrupts and send them to procrssor's HT vector controller. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200528152757.1028711-4-jiaxun.yang@flygoat.com
2020-05-29irqchip: Add Loongson HyperTransport Vector supportJiaxun Yang
This controller appears on Loongson-3 chips for receiving interrupt vectors from PCH's PIC and PCH's PCIe MSI interrupts. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200528152757.1028711-2-jiaxun.yang@flygoat.com
2020-05-29Merge tag 'extcon-next-for-5.8' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next Chanwoo writes: Update extcon for v5.8 Detailed description for this pull request: 1. Update extcon provider driver - Fix an error handling code by using devm_iio_channel_get() for extcon-adc-jac.c - Fix the usage counter imbalance of runtime PM for extcon-arizona.c. - Add proper dt-compatible string for extcon-max14577.c. 2. Update extcon core with minor updates: - Remove unneeded initialization of local variable in extcon_register_notifier * tag 'extcon-next-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon: extcon: arizona: Fix runtime PM imbalance on error extcon: max14577: Add proper dt-compatible strings extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()' extcon: remove redundant assignment to variable idx
2020-05-29extcon: arizona: Fix runtime PM imbalance on errorDinghao Liu
When arizona_request_irq() returns an error code, a pairing runtime PM usage counter decrement is needed to keep the counter balanced. For error paths after this function, things are the same. Also, remove calls to pm_runtime_disable() when pm_runtime_enable() has not been executed. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-05-29extcon: max14577: Add proper dt-compatible stringsMarek Szyprowski
Add device tree compatible strings and create proper modalias structures to let this driver load automatically if compiled as module, because max14577 MFD driver creates MFD cells with such compatible strings. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-05-29extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'Christophe JAILLET
In some error handling paths, a call to 'iio_channel_get()' is not balanced by a corresponding call to 'iio_channel_release()'. This can be achieved easily by using the devm_ variant of 'iio_channel_get()'. This has the extra benefit to simplify the remove function. Fixes: 19939860dcae ("extcon: adc_jack: adc-jack driver to support 3.5 pi or simliar devices") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-05-29extcon: remove redundant assignment to variable idxColin Ian King
The variable idx is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-05-29Merge tag 'usb-serial-5.8-rc1-2' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial fixes for 5.8-rc1 Here are some new modem device ids. All have been in linux-next with no reported issues. * tag 'usb-serial-5.8-rc1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Telit LE910C1-EUX compositions USB: serial: qcserial: add DW5816e QDL support
2020-05-29Merge tag 'usb-serial-5.8-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 5.8-rc1 Here are the USB-serial updates for 5.8-rc1, including: - a SPDX comment-style clean up - a fix usb_wwan modem drivers which could end up resubmitting the their read URBs in a tight loop on disconnect - a regression fix for a subset of quirky ch341 devices which would lock up on certain low line speeds when using the new divisor algorithm All have been in linux-next with no reported issues. * tag 'usb-serial-5.8-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: ch341: fix lockup of devices with limited prescaler USB: serial: ch341: add basis for quirk detection USB: serial: usb_wwan: do not resubmit rx urb on fatal errors USB: serial: Use the correct style for SPDX License Identifier
2020-05-29ARM: zynq: Don't select CONFIG_ICSTRob Herring
CONFIG_ICST is for ARM Ltd reference platforms and isn't used by Zynq platform, so remove selecting it. It appears to be a copy-n-paste error. Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Rob Herring <robh@kernel.org> [arnd: remove the versatile clk driver change I added previously] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-29iwlwifi: bump FW API to 56 for AX devicesLuca Coelho
Start supporting API version 56 for AX devices. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200529092401.aabbc5b472ee.I88cb2c3d2d07e62eac3671335ff1fb80b73c5839@changeid
2020-05-29iwlwifi: mvm: add support for range request version 10Avraham Stern
Range request version 10 keeps the same command size as version 9 but uses 2 reserved fields for the responder beacon interval and station id (if exists). For now, since the beacon interval of unassoc APs is unknown, use a value of 100 TUs which is a common value for many APs. While at it, remove the definition for CCMP_256 cipher, since this is not supported. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200529092401.b7ccdad0805f.I59ea7f773caed85a66c61401066ae169008442e6@changeid
2020-05-29iwlwifi: mvm: fix aux station leakSharon
When mvm is initialized we alloc aux station with aux queue. We later free the station memory when driver is stopped, but we never free the queue's memory, which casues a leak. Add a proper de-initialization of the station. Signed-off-by: Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200529092401.0121c5be55e9.Id7516fbb3482131d0c9dfb51ff20b226617ddb49@changeid
2020-05-29iwlwifi: move txq-specific from trans_pcie to common transMordechay Goodstein
We don't want to have txq code in the PCIe transport code, so move all the relevant elements to a new iwl_txq structure and store it in iwl_trans. spatch @ replace_pcie @ struct iwl_trans_pcie *trans_pcie; @@ ( -trans_pcie->queue_stopped +trans->txqs.queue_stopped | -trans_pcie->queue_used +trans->txqs.queue_used | -trans_pcie->txq +trans->txqs.txq | -trans_pcie->txq +trans->txqs.txq | -trans_pcie->cmd_queue +trans->txqs.cmd.q_id | -trans_pcie->cmd_fifo +trans->txqs.cmd.fifo | -trans_pcie->cmd_q_wdg_timeout +trans->txqs.cmd.wdg_timeout ) // clean all new unused variables @ depends on replace_pcie @ type T; identifier i; expression E; @@ - T i = E; ... when != i Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200529092401.a428d3c9d66f.Ie04ae55f33954636a39c98e7ae1e739c0507435b@changeid
generated by cgit (git 2.34.1) at 2025-09-14 04:37:54 +0000