summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-05-02bnxt_en: Add VF PCI ID for 5760X (P7) chipsAjit Khaparde
No driver logic changes are required to support the VFs, so just add the VF PCI ID. Reviewed-by: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com> Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240501003056.100607-7-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-02bnxt_en: Optimize recovery path ULP locking in the driverKalesh AP
In the error recovery path (AER, firmware recovery, etc), the driver notifies the RoCE driver via ULP_STOP before the reset and via ULP_START after the reset, all under RTNL_LOCK. The RoCE driver can take a long time if there are a lot of QPs to destroy, so it is not ideal to hold the global RTNL lock. Rely on the new en_dev_lock mutex instead for ULP_STOP and ULP_START. For the most part, we move the ULP_STOP call before we take the RTNL lock and move the ULP_START after RTNL unlock. Note that SRIOV re-enablement must be done after ULP_START or RoCE on the VFs will not resume properly after reset. The one scenario in bnxt_hwrm_if_change() where the RTNL lock is already taken in the .ndo_open() context requires the ULP restart to be deferred to the bnxt_sp_task() workqueue. Reviewed-by: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com> Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240501003056.100607-6-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-02bnxt_en: Add a mutex to synchronize ULP operationsKalesh AP
The current scheme relies heavily on the RTNL lock for all ULP operations between the L2 and the RoCE driver. Add a new en_dev_lock mutex so that the asynchronous ULP_STOP and ULP_START operations can be serialized with bnxt_register_dev() and bnxt_unregister_dev() calls without relying on the RTNL lock. The next patch will remove the RTNL lock from the ULP_STOP and ULP_START calls. Reviewed-by: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com> Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240501003056.100607-5-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-02bnxt_en: Don't call ULP_STOP/ULP_START during L2 resetMichael Chan
There is no need to call ULP_STOP and ULP_START before and after the L2 reset in bnxt_reset_task(). This L2 reset is done after detecting TX timeout, RX ring errors, or VF config changes. The L2 reset does not affect RoCE since the firmware is not reset and the backing store is left alone. Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240501003056.100607-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-02bnxt_en: Don't support offline self test when RoCE driver is loadedKalesh AP
Offline self test is a very disruptive operation for RoCE and requires all active QPs to be destroyed. With a large number of QPs, it can take a long time to destroy all the QPs and can timeout. Do not allow ethtool offline self test if the RoCE driver is registered on the device. Reviewed-by: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com> Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240501003056.100607-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-02bnxt_en: share NQ ring sw_stats memory with subringsEdwin Peer
On P5_PLUS chips and later, the NQ rings have subrings for RX and TX completions respectively. These subrings are passed to the poll function instead of the base NQ, but each ring carries its own copy of the software ring statistics. For stats to be conveniently accessible in __bnxt_poll_work(), the statistics memory should either be shared between the NQ and its subrings or the subrings need to be included in the ethtool stats aggregation logic. This patch opts for the former, because it's more efficient and less confusing having the software statistics for a ring exist in a single place. Before this patch, the counter will not be displayed if the "wrong" cpr->sw_stats was used to increment a counter. Link: https://lore.kernel.org/netdev/CACKFLikEhVAJA+osD7UjQNotdGte+fth7zOy7yDdLkTyFk9Pyw@mail.gmail.com/ Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240501003056.100607-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-02Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== i40e: cleanups & refactors Ivan Vecera says: This series do following: Patch 1 - Removes write-only flags field from i40e_veb structure and from i40e_veb_setup() parameters Patch 2 - Refactors parameter of i40e_notify_client_of_l2_param_changes() and i40e_notify_client_of_netdev_close() Patch 3 - Refactors parameter of i40e_detect_recover_hung() Patch 4 - Adds helper i40e_pf_get_main_vsi() to get main VSI and uses it in existing code Patch 5 - Consolidates checks whether given VSI is the main one Patch 6 - Adds helper i40e_pf_get_main_veb() to get main VEB and uses it in existing code Patch 7 - Adds helper i40e_vsi_reconfig_tc() to reconfigure TC for particular and uses it to replace existing open-coded pieces * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: i40e: Add and use helper to reconfigure TC for given VSI i40e: Add helper to access main VEB i40e: Consolidate checks whether given VSI is main i40e: Add helper to access main VSI i40e: Refactor argument of i40e_detect_recover_hung() i40e: Refactor argument of several client notification functions i40e: Remove flags field from i40e_veb ==================== Link: https://lore.kernel.org/r/20240430180639.1938515-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-02thermal/drivers/mediatek/lvts_thermal: Check NULL ptr on lvts_dataJulien Panis
Verify that lvts_data is not NULL before using it. Signed-off-by: Julien Panis <jpanis@baylibre.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20240502-mtk-thermal-lvts-data-v1-1-65f1b0bfad37@baylibre.com
2024-05-02Merge commit '50abcc179e0c9ca667feb223b26ea406d5c4c556' of ↵Jens Axboe
git://git.infradead.org/nvme into block-6.9 Pull NVMe fixes from Keith. * git://git.infradead.org/nvme: nvme-tcp: strict pdu pacing to avoid send stalls on TLS nvmet: fix nvme status code when namespace is disabled nvmet-tcp: fix possible memory leak when tearing down a controller nvme: cancel pending I/O if nvme controller is in terminal state nvmet-auth: replace pr_debug() with pr_err() to report an error. nvmet-auth: return the error code to the nvmet_auth_host_hash() callers nvme: find numa distance only if controller has valid numa id nvme: fix warn output about shared namespaces without CONFIG_NVME_MULTIPATH
2024-05-02Merge tag 'ti-driver-soc-for-v6.10' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers TI SoC driver updates for v6.10 Generic Cleanups/Fixes: - wkup_m3_ipc: Minor optimization to send NULL dummy message instead of empty pointer message - ti_sci: Register restart handler unconditionally * tag 'ti-driver-soc-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: soc: ti: wkup_m3_ipc: Send NULL dummy message instead of pointer message firmware: ti_sci: Unconditionally register reset handler firmware: ti_sci: Use devm_register_restart_handler() Link: https://lore.kernel.org/r/20240501124300.i5jzeugdlrlnfg22@undrafted Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-02media: verisilicon: Correct a typo in H1_REG_MAD_CTRL_MAD_THRESHOLDAndrzej Pietrasiewicz
It's a THRESHOLD and not a THREDHOLD. Link: https://lore.kernel.org/linux-media/20231116154816.70959-3-andrzej.p@collabora.com Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-05-02media: verisilicon Correct a typo in H1_REG_ENC_CTRL2_DEBLOCKING_FILTER_MODEAndrzej Pietrasiewicz
It's a FILTER and not FILETER. Link: https://lore.kernel.org/linux-media/20231116154816.70959-2-andrzej.p@collabora.com Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-05-02media: sunxi: a83-mips-csi2: also select GENERIC_PHYRandy Dunlap
When selecting GENERIC_PHY_MIPI_DPHY, also select GENERIC_PHY to prevent kconfig warnings: WARNING: unmet direct dependencies detected for GENERIC_PHY_MIPI_DPHY Depends on [n]: GENERIC_PHY [=n] Selected by [y]: - VIDEO_SUN8I_A83T_MIPI_CSI2 [=y] && MEDIA_SUPPORT [=y] && MEDIA_PLATFORM_SUPPORT [=y] && MEDIA_PLATFORM_DRIVERS [=y] && V4L_PLATFORM_DRIVERS [=y] && VIDEO_DEV [=y] && (ARCH_SUNXI || COMPILE_TEST [=y]) && PM [=y] && COMMON_CLK [=y] && RESET_CONTROLLER [=y] Fixes: 94d7fd9692b5 ("media: sunxi: Depend on GENERIC_PHY_MIPI_DPHY") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/ZQ/WS8HC1A3F0Qn8@rli9-mobl Link: https://lore.kernel.org/linux-media/20230927040438.5589-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-05-02thermal: intel: Add missing module descriptionSrinivas Pandruvada
Fix warnings displayed by "make W=1" build: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/thermal/intel/intel_soc_dts_iosf.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/thermal/intel/int340x_thermal/processor_thermal_rapl.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/thermal/intel/int340x_thermal/processor_thermal_mbox.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/thermal/intel/int340x_thermal/processor_thermal_wt_req.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/thermal/intel/int340x_thermal/processor_thermal_wt_hint.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/thermal/intel/int340x_thermal/processor_thermal_power_floor Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-05-02wifi: mt76: enable spectrum managementFelix Fietkau
It is supported by all drivers Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7925: add EHT radiotap support in monitor modeDeren Wu
Add IEEE80211_RADIOTAP_EHT and IEEE80211_RADIOTAP_EHT_USIG radiotap to fill in EHT information, such as MCS, NSS, GI and bandwidth. Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7921e: add LED control supportHao Zhang
Introduce wifi LED switch control, add flow to Control a wifi gpio pin based on the status of WIFI radio, if the pin is connected to an LED, the LED will indicate the status of the WiFi radio. Signed-off-by: Hao Zhang <hao.zhang@mediatek.com> Co-developed-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7996: let upper layer handle MGMT frame protectionMichael-CY Lee
The firmware support for management frame protection has limitations: - do not support cipher BIP-GMAC-128 and BIP-GMAC-256 - support cipher BIP-CMAC-128 and BIP-CMAC-256, except action frame with action type 'not robust'. Therefore, to simplify the logic, do not set the IGTK to firmware and let the encryption of management frames be handled by upper layer. Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7921: cqm rssi low/high event notifyRong Yan
The implementation amounts to setting the driver flag IEEE80211_VIF_SUPPORTS_CQM_RSSI, and then providing mechanisms for continuously updating enough information to be able to provide notifications to userspace when RSSI drops below a certain threshold Signed-off-by: Rong Yan <rong.yan@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: make const arrays in functions staticFelix Fietkau
Reduces size by avoiding duplicates Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: connac: use muar idx 0xe for non-mt799x as wellFelix Fietkau
This is expected by the firmware of older chipsets as well, though it may not have been as strongly required as on mt799x Fixes: 098428c400ff ("wifi: mt76: connac: set correct muar_idx for mt799x chipsets") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7996: add sanity checks for background radar triggerStanleyYP Wang
Check if background radar is enabled or not before manually triggering it, and also add more checks in radar detected event. Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: connac: enable critical packet mode support for mt7992Howard Hsu
For mt7992 chipsets, critical packet mode should be properly configured to let the HW SDO module correctly fill the AC queue in TX descriptors of some higher priority packets such as ARP and ICMP. Without this patch, HW queues may hang when running MU traffic. Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7996: fix potential memory leakage when reading chip temperatureHoward Hsu
Without this commit, reading chip temperature will cause memory leakage. Fixes: 6879b2e94172 ("wifi: mt76: mt7996: add thermal sensor device support") Reported-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7996: fix non-main BSS no beacon issue for MBSS scenarioHenry Yen
Do not add UNI_BSS_INFO_11V_MBSSID tag when bssid_indicator is not set to avoid abnormal beaconing behavior in non-11v MBSS scenario. Signed-off-by: Henry Yen <henry.yen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: connac: enable HW CSO module for mt7996Howard Hsu
For mt7996 chipsets, the HW CSO module can help to identify TCP traffic, which assists the firmware in adjusting algorithms to improve overall performance. Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7996: set RCPI value in rate control commandPeter Chiu
Set RCPI values in mt7996_mcu_sta_rate_ctrl_tlv(), which can make the FW rate control algorithm be initialized with a better MCS selection table. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: connac: use peer address for station BMC entryShayne Chen
Set peer address and aid for the BMC wtbl of station interface. For some functions such as parsing MU_EDCA parameters from beacon, firmware will need the peer address to do correct parsing. Without this patch, MU uplink traffic would get suffered. Reported-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7996: disable rx header translation for BMC entryShayne Chen
When a BMC wtbl of station interface is correctly set with peer address, HW will do rx header translation for broadcast data packets, which makes mac80211 unable to find the corresponding ieee80211_sta and drop the packets. To fix this, disable HW rx header translation for BMC entry. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7915: Remove unused of_gpio.hAndy Shevchenko
of_gpio.h is deprecated and subject to remove. The driver doesn't use it, simply remove the unused header. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7915: add missing chanctx opsBen Greear
Looks like this was missed in the initial patch that made the conversion to the emulated chanctx drivers. Fixes: 0a44dfc07074 ("wifi: mac80211: simplify non-chanctx drivers") Tested-by: James Courtier-Dutton <james.dutton@gmail.com> Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: sdio: move mcu queue size check inside critical sectionLorenzo Bianconi
Even if it is not a real issue at the moment since concurrent access to mcu message queue is protected by mcu mutex, make the code more robust and move mcu queue free space check inside queue spinlock critical section. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7996: fix uninitialized variable in mt7996_irq_tasklet()Lorenzo Bianconi
Set intr1 to 0 in mt7996_irq_tasklet() in order to avoid possible uninitialized variable usage if wed is not active for hif2. Fixes: 83eafc9251d6 ("wifi: mt76: mt7996: add wed tx support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7925: ensure 4-byte alignment for suspend & wow commandMing Yen Hsieh
Before sending suspend & wow command to FW, its length should be 4-bytes alignd. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7921s: fix potential hung tasks during chip recoveryLeon Yen
During chip recovery (e.g. chip reset), there is a possible situation that kernel worker reset_work is holding the lock and waiting for kernel thread stat_worker to be parked, while stat_worker is waiting for the release of the same lock. It causes a deadlock resulting in the dumping of hung tasks messages and possible rebooting of the device. This patch prevents the execution of stat_worker during the chip recovery. Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Ming Yen Hsieh <MingYen.Hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7921: introduce mt7920 PCIe supportDeren Wu
mt7920e is a mt7921 series chipset with 802.11ax 2x2:2SS support. The major difference is in firmware side only, at this moment. This patch would add some mandatory changes for new chip id and firmware download control. Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7996: fix size of txpower MCU commandChad Monroe
Fixes issues with scanning and low power output at some rates. Fixes: f75e4779d215 ("wifi: mt76: mt7996: add txpower setting support") Signed-off-by: Chad Monroe <chad@monroe.io> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: connac: check for null before dereferencingMuhammad Usama Anjum
The wcid can be NULL. It should be checked for validity before dereferencing it to avoid crash. Fixes: 098428c400ff ("wifi: mt76: connac: set correct muar_idx for mt799x chipsets") Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7603: add wpdma tx eof flag for PSE client resetFelix Fietkau
This flag is needed for the PSE client reset. Fixes watchdog reset issues. Fixes: c677dda16523 ("wifi: mt76: mt7603: improve watchdog reset reliablity") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7603: fix tx queue of loopback packetsFelix Fietkau
Use the correct WMM AC queue instead of the MGMT one to fix potential issues with aggregation sequence number tracking. Drop non-bufferable packets. Fixes: fca9615f1a43 ("mt76: mt7603: fix up hardware queue index for PS filtered packets") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7915: add fallback in case of missing precal dataFelix Fietkau
When pre-calibration data is missing, do not fail the driver probe. Instead, just print a warning and fall back to regular calibration. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7915: add mt7986, mt7916 and mt7981 pre-calibrationPeter Chiu
Add pre-calibration for mt7986 and mt7916. It has different data size with mt7915. Group cal needs 54k and 94k for 2G + 5G and 2G + 6G, respectively. DPD cal needs 300k. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7915: add support for disabling in-band discoveryMeiChia Chiu
Send an update to the MCU whenever the settings change Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7996: only set MT76_MCU_RESET for the main phyFelix Fietkau
The MT76_MCU_RESET flag is only read on the main phy. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7915: only set MT76_MCU_RESET for the main phyBo Jiao
The MT76_MCU_RESET flag is only read on the main phy. Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7915: fix HE PHY capabilities IE for station modeHoward Hsu
Set correct beamformer capabilities for station vif in HE PHY capabilities IE. Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7915: fix bogus Tx/Rx airtime duration valuesHenry Yen
Do not report measurements if the airtime counter was cleared since the last update (possibly by firmware) Signed-off-by: Henry Yen <henry.yen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7915: fix mcu command format for mt7915 tx statsPeter Chiu
The mcu command format are different for mt7915 and mt7986. Fix the mt7915_mcu_wed_wa_tx_stats to support mt7915 and mt7986. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: fix tx packet loss when scanning on DBDCFelix Fietkau
When queueing packets, only the MT76_RESET flag of the primary PHY is checked. If the primary PHY is scanning or changing channels, this can lead to packet loss for tx on the second PHY. Fix this by passing the phy to the .tx_queue_skb op and using it to check the correct flag. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: replace skb_put with skb_put_zeroFelix Fietkau
Avoid potentially reusing uninitialized data Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-09-23 15:46:24 +0000