| Age | Commit message (Collapse) | Author |
|---|
|
The modpost script is not happy
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/classmate-laptop.o
because there is a missing module description.
Add it to the module.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Link: https://lore.kernel.org/r/20240423161108.2636958-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add a new driver for the custom fast charging protocol found on Lenovo Yoga
Tablet 2 1380F / 1380L models.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240422131649.46002-1-hdegoede@redhat.com
|
|
The driver should check whether the client provides the platform_data.
The following log reveals it:
[ 29.610324] BUG: KASAN: null-ptr-deref in kmemdup+0x30/0x40
[ 29.610730] Read of size 40 at addr 0000000000000000 by task bash/414
[ 29.612820] Call Trace:
[ 29.613030] <TASK>
[ 29.613201] dump_stack_lvl+0x56/0x6f
[ 29.613496] ? kmemdup+0x30/0x40
[ 29.613754] print_report.cold+0x494/0x6b7
[ 29.614082] ? kmemdup+0x30/0x40
[ 29.614340] kasan_report+0x8a/0x190
[ 29.614628] ? kmemdup+0x30/0x40
[ 29.614888] kasan_check_range+0x14d/0x1d0
[ 29.615213] memcpy+0x20/0x60
[ 29.615454] kmemdup+0x30/0x40
[ 29.615700] lgdt3306a_probe+0x52/0x310
[ 29.616339] i2c_device_probe+0x951/0xa90
Link: https://lore.kernel.org/linux-media/20220405095018.3993578-1-zheyuma97@gmail.com
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add a new driver for the MSI WMI Platform interface. The underlying
ACPI WMI interface supports many features, but so far only reading
of fan speed sensors is implemented.
The driver was reverse-engineered based on a user request to the
lm-sensors project, see the github issue for details.
The ACPI WMI interface used by this driver seems to use the same
embedded controller interface as the msi-ec driver, but supports
automatic discovery of supported machines without relying on a
DMI whitelist.
The driver was tested by the user who created the github issue.
Closes: https://github.com/lm-sensors/lm-sensors/issues/475
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240421191145.3189-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
acpi_send_ev is a bool and everywhere else true/false is used
to set it. Replace the one instance using 0 with false.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240429093446.130322-1-hdegoede@redhat.com
|
|
The hotkey combination Fn + G can be used to disable the trackpoint
doubletap feature on Windows. Add matching functionality for Linux.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Link: https://lore.kernel.org/r/20240417173124.9953-4-mpearson-lenovo@squebb.ca
[hdegoede@redhat.com: Adjust for switch to sparse-keymap keymaps]
[hdegoede@redhat.com: Do not log unknown event msg for doubletap when disabled]
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-25-hdegoede@redhat.com
|
|
New Lenovo platforms are adding the FN+N key to generate system debug
details that support can use for collecting important details on any
customer cases for Windows.
Add the infrastructure so we can do the same on Linux by sending
a KEY_VENDOR keycode to userspace.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Nitin Joshi <njoshi1@lenovo.com>
Link: https://lore.kernel.org/r/20240417173124.9953-3-mpearson-lenovo@squebb.ca
[hdegoede@redhat.com: Adjust for switch to sparse-keymap keymaps]
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-24-hdegoede@redhat.com
|
|
Lenovo trackpoints are adding the ability to generate a doubletap event.
This handles the doubletap event and sends the KEY_PROG4 event to
userspace. Despite the driver itself not using KEY_PROG1 - KEY_PROG3 this
still uses KEY_PROG4 because of some keys being remapped to KEY_PROG1 -
KEY_PROG3 by default by the upstream udev hwdb containing:
evdev:name:ThinkPad Extra Buttons:dmi:bvn*:bvr*:bd*:svnLENOVO*:pn*:*
...
KEYBOARD_KEY_17=prog1
KEYBOARD_KEY_1a=f20 # Microphone mute button
KEYBOARD_KEY_45=bookmarks
KEYBOARD_KEY_46=prog2 # Fn + PrtSc, on Windows: Snipping tool
KEYBOARD_KEY_4a=prog3 # Fn + Right shift, on Windows: No idea
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Link: https://lore.kernel.org/r/20240417173124.9953-2-mpearson-lenovo@squebb.ca
[hdegoede@redhat.com: Adjust for switch to sparse-keymap keymaps]
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-23-hdegoede@redhat.com
|
|
Modify how known_ev event is handled in preparation for adding new hkey
event range.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20240417173124.9953-1-mpearson-lenovo@squebb.ca
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-22-hdegoede@redhat.com
|
|
cloud keys
The X1 carbon 2014 / 2nd gen's adaptive keyboard top row's "Home" mode,
which is 1 of the 2 modes Linux supports, has clipping-tool and cloud
buttons which so far are not mapped.
I assume these were left as KEY_RESERVED because no suitable KEY_FOO codes
were available when support was added.
In the mean time we have gotten KEY_SELECTIVE_SCREENSHOT and this has been
used for the clipping-tool function under Fn + PrtSc on more traditional
ThinkPad keyboards already.
Finding a KEY_FOO code for the cloud key is harder looking at the symbol
it seems to refer to cloud-storage which made me think of file syncing,
or file transfer which has let me to pick KEY_XFER for this.
Note this is based on looking at a picture of the adaptive top row
in Home mode and has not been tested on an actual adaptive keyboard.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-21-hdegoede@redhat.com
|
|
Switch the hotkey keymap handling over to the sparse-keymap helpers,
there should be no functional changes from this.
Note all the mappings to KEY_UNKNOWN are removed since that is the default
behavior of sparse_keymap_report_event() for unknown scancodes.
Also drop the big comment about making changes to the keymaps since
the contents of that comment are mostly obsolete.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-20-hdegoede@redhat.com
|
|
The input core already filters out EV_KEY events for KEY_RESERVED,
remove the check for this in tpacpi_input_send_key() and rely
on the input core filtering instead.
Also change tpacpi_input_send_key() to only report the scancode
once instead of reporting it on both press and release. Together
these 2 changes make tpacpi_input_send_key() behave the same as
sparse_keymap_report_event().
The goal of this patch is to have a separate commit with
the slightly different behavior from sparse_keymap_report_event()
before switching over to using the sparse-keymap helpers.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-19-hdegoede@redhat.com
|
|
Change the default keymap to report the correct keycodes for the volume and
brightness keys. Reporting key events for these is already filtered out by
the hotkey_reserved_mask which masks these keys out of hotkey_user_mask at
initialization time, so there is no need to also map them to KEY_RESERVED.
This avoids users, who want these to be reported, having to also remap
the keycodes on top of overriding hotkey_user_mask to report these
and Linux userspace has already been overriding the KEY_RESERVED mappings
with the correct keycodes through udev/hwdb/60-keyboard.hwdb for years now.
Also drop hotkey_unmap() it was only used to dynamically map the brightness
keys to KEY_RESERVED and after removing that it has no remaining users.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-18-hdegoede@redhat.com
|
|
Change the hotkey_reserved_mask initialization to hardcode the list
of reserved keys. There are only a few reserved keys and the code to
iterate over the keymap will be removed when moving to sparse-keymaps.
Note only the 32 original hotkeys are affected by the hotkey_*_mask values:
if (i < sizeof(hotkey_reserved_mask)*8)
hotkey_reserved_mask |= 1 << i;
The (i < sizeof(hotkey_reserved_mask)*8) condition translates to (i < 32)
so this code only ever set bits in hotkey_reserved_mask for the 32 original
hotkeys. Therefor this patch does not set any bits in hotkey_reserved_mask
for the KEY_RESERVED mappings for the adaptive keyboard scancodes.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-17-hdegoede@redhat.com
|
|
Spectrum ASICs only support a single interrupt, that means that all the
events are handled by one IRQ (interrupt request) handler. Once an
interrupt is received, we schedule tasklet to handle events from EQ and
then schedule tasklets to handle completions from CQs. Tasklet runs in
softIRQ (software IRQ) context, and will be run on the same CPU which
scheduled it. That means that today we use only one CPU to handle all the
packets (both network packets and EMADs) from hardware.
This can be improved using NAPI. The idea is to use NAPI instance per
CQ, which is mapped 1:1 to DQ (RDQ or SDQ). NAPI poll method can be run
in kernel thread, so then the driver will be able to handle WQEs in several
CPUs. Convert the existing code to use NAPI APIs.
Add NAPI instance as part of 'struct mlxsw_pci_queue' and initialize it
as part of CQs initialization. Set the appropriate poll method and dummy
net device, according to queue number, similar to tasklet setup. For CQs
which are used for completions of RDQ, use Rx poll method and
'napi_dev_rx', which is set as 'threaded'. It means that Rx poll method
will run in kernel context, so several RDQs will be handled in parallel.
For CQs which are used for completions of SDQ, use Tx poll method and
'napi_dev_tx', this method will run in softIRQ context, as it is
recommended in NAPI documentation, as Tx packets' processing is short task.
Convert mlxsw_pci_cq_{rx,tx}_tasklet() to poll methods. Handle 'budget'
argument - ignore it in Tx poll method, as it is recommended to not limit
Tx processing. For Rx processing, handle up to 'budget' completions.
Return 'work_done' which is the amount of completions that were handled.
Handle the following cases:
1. After processing 'budget' completions, the driver still has work to do:
Return work-done = budget. In that case, the NAPI instance will be
polled again (without the need to be rescheduled). Do not re-arm the
queue, as NAPI will handle the reschedule, so we do not have to involve
hardware to send an additional interrupt for the completions that should
be processed.
2. Event processing has been completed:
Call napi_complete_done() to mark NAPI processing as completed, which
means that the poll method will not be rescheduled. Re-arm the queue,
as all completions were handled.
In case that poll method handled exactly 'budget' completions, return
work-done = budget -1, to distinguish from the case that driver still
has completions to handle. Otherwise, return the amount of completions
that were handled.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The next patch will set the driver to use NAPI for event processing. Then
tasklet mechanism will be used only for EQ. Reorganize 'mlxsw_pci_queue'
to hold EQ and CQ attributes in a union. For now, add tasklet for both EQ
and CQ. This will be changed in the next patch, as 'tasklet_struct' will be
replaced with NAPI instance.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mlxsw will use NAPI for event processing in a next patch. As preparation,
add two dummy net devices and initialize them.
NAPI instance should be attached to net device. Usually each queue is used
by a single net device in network drivers, so the mapping between net
device to NAPI instance is intuitive. In our case, Rx queues are not per
port, they are per trap-group. Tx queues are mapped to net devices, but we
do not have a separate queue for each local port, several ports share the
same queue.
Use init_dummy_netdev() to initialize dummy net devices for NAPI.
To run NAPI poll method in a kernel thread, the net device which NAPI
instance is attached to should be marked as 'threaded'. It is
recommended to handle Tx packets in softIRQ context, as usually this is
a short task - just free the Tx packet which has been transmitted.
Rx packets handling is more complicated task, so drivers can use a
dedicated kernel thread to process them. It allows processing packets from
different Rx queues in parallel. We would like to handle only Rx packets in
kernel threads, which means that we will use two dummy net devices
(one for Rx and one for Tx). Set only one of them with 'threaded' as it
will be used for Rx processing. Do not fail in case that setting 'threaded'
fails, as it is better to use regular softIRQ NAPI rather than preventing
the driver from loading.
Note that the net devices are initialized with init_dummy_netdev(), so
they are not registered, which means that they will not be visible to user.
It will not be possible to change 'threaded' configuration from user
space, but it is reasonable in our case, as there is no another
configuration which makes sense, considering that user has no influence
on the usage of each queue.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, for each CQE in CQ, we ring CQ doorbell, then handle RDQ and
ring RDQ doorbell. Finally we ring CQ arm doorbell - once per CQ tasklet.
The idea of ringing CQ doorbell before RDQ doorbell, is to be sure that
when we post new WQE (after RDQ is handled), there is an available CQE.
This was done because of a hardware bug as part of
commit c9ebea04cb1b ("mlxsw: pci: Ring CQ's doorbell before RDQ's").
There is no real reason to ring RDQ and CQ doorbells for each completion,
it is better to handle several completions and reduce number of ringings,
as access to hardware is expensive (time wise) and might take time because
of memory barriers.
A previous patch changed CQ tasklet to handle up to 64 Rx packets. With
this limitation, we can ring CQ and RDQ doorbells once per CQ tasklet.
The counters of the doorbells are increased by the amount of packets
that we handled, then the device will know for which completion to send
an additional event.
To avoid reordering CQ and RDQ doorbells' ring, let the tasklet to ring
also RDQ doorbell, mlxsw_pci_cqe_rdq_handle() handles the counter but
does not ring the doorbell.
Note that with this change there is no need to copy the CQE, as we ring CQ
doorbell only after Rx packet processing (which uses the CQE) is done.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can get many completions in one interrupt. Currently, the CQ tasklet
handles up to half queue size completions, and then arms the hardware to
generate additional events, which means that in case that there were
additional completions that we did not handle, we will get immediately an
additional interrupt to handle the rest.
The decision to handle up to half of the queue size is arbitrary and was
determined in 2015, when mlxsw driver was added to the kernel. One
additional fact that should be taken into account is that while WQEs
from RDQ are handled, the CPU that handles the tasklet is dedicated for
this task, which means that we might hold the CPU for a long time.
Handle WQEs in smaller chucks, then arm CQ doorbell to notify the hardware
to send additional notifications. Set the chunk size to 64 as this number
is recommended using NAPI and the driver will use NAPI in a next patch.
Note that for now we use ARM doorbell to retrigger CQ tasklet, but with
NAPI it will be more efficient as software will reschedule the poll
method and we will not involve hardware for that.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Do not send ACPI netlink events for unknown hotkeys, to avoid userspace
starting to rely on them. Instead these should be added to the keymap to
send evdev events.
This should not cause a behavior change for existing laptop models since
all currently known 0x1xxx events have a mapping.
In hindsight the ACPI netlink events should have been suppressed for
the adaptive keyboard and extended hotkeys events too. But the kernel has
been sending ACPI netlink events for those for a long time now, so we
cannot just stop sending them without potentially causing issues for
existing users who may depend on these.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-16-hdegoede@redhat.com
|
|
tpacpi_input_send_key()
All callers of tpacpi_input_send_key() first call tpacpi_driver_event(),
move the tpacpi_driver_event() inside tpacpi_input_send_key() to avoid
code duplication.
For the original hotkey codes 0x1001 - 0x1020 tpacpi_driver_event() never
returns true. So the added "return true;" inside tpacpi_input_send_key()
never happens when called from tpacpi_hotkey_send_key() so behavior does
not change.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-15-hdegoede@redhat.com
|
|
tpacpi_input_send_key()
Move the mapping of hkey events to scancodes to tpacpi_input_send_key(),
this results in a nice cleanup and prepares things for adding sparse-keymap
support.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-14-hdegoede@redhat.com
|
|
hotkey_driver_event()
Both are only 1 / 2 lines and both only have 1 caller fold the contents
into tpacpi_hotkey_send_key() which is their single caller.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-13-hdegoede@redhat.com
|
|
Call tpacpi_driver_event() at the top of hotkey_notify_hotkey() for all
(orig / adaptive / extended) hotkey types, rather then having the orig
code path call tpacpi_input_send_key_masked() which calls it through
hotkey_driver_event() and having the adaptive / extended helpers call
it separately.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-12-hdegoede@redhat.com
|
|
tpacpi_input_send_key()
Move hotkey_user_mask check to tpacpi_input_send_key(), this is
a preparation patch for further refactoring.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-11-hdegoede@redhat.com
|
|
switch-case
Move the special handling (send_acpi_ev = false, hotkey_source_mask check)
for original hotkeys out of the switch-case in hotkey_notify_hotkey().
This is a preparation patch for further refactoring.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-10-hdegoede@redhat.com
|
|
tpacpi_driver_event()
Factor out the adaptive kbd non hotkey event handling into
adaptive_keyboard_change_row() and adaptive_keyboard_s_quickview_row()
helpers and move the handling of TP_HKEY_EV_DFR_CHANGE_ROW and
TP_HKEY_EV_DFR_S_QUICKVIEW_ROW to tpacpi_driver_event().
This groups all the handling of hotkey events which do not emit
a key press event together in tpacpi_driver_event().
This also drops the returning of false as known-event value when
adaptive_keyboard_get_mode() / adaptive_keyboard_set_mode() fail.
These functions already log an error on failure, returning false just
leads to an extra messgae being logged about the hkey event being
unknown, which is wrong as the event is not unknown.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-9-hdegoede@redhat.com
|
|
the event
tpacpi_driver_event() already only responds to hkey events which it knows
about. Make it return a bool and return true when it has handled the event.
This avoids the need to list TP_HKEY_EV_foo values to which it responds
both in its caller and in the function itself.
Instead callers can now call it unconditionally and check the return value.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-8-hdegoede@redhat.com
|
|
Modify hotkey_notify_hotkey() and it helpers to mostly directly operate
on hkey codes (TP_HKEY_EV_* returned by "MHKP") instead of on the 0 -
TPACPI_HOTKEY_MAP_LEN scancodes used for scancode -> keycode translation.
Keeping things in the hkey format as long a possible is a bit cleaner and
this patch prepares things for moving to sparse-keymaps.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-7-hdegoede@redhat.com
|
|
Use tpacpi_input_send_key() in adaptive_keyboard_hotkey_notify_hotkey()
instead of re-implementing it there.
Note this change will also result in a behavioral change, key presses on
the adaptive keyboard will now also send a EV_MSC event with the scancode,
just like all other hotkey presses already do. This is not a bug but
a feature.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20240424122834.19801-6-hdegoede@redhat.com
|
|
Setting ignore_acpi_ev to true has the same result as setting
send_acpi_ev to false, so there is no need to have both.
Drop ignore_acpi_ev.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-5-hdegoede@redhat.com
|
|
send_acpi_ev and ignore_acpi_ev are already initialized to true and false
respectively by hotkey_notify() before calling the various helpers. Drop
the needless re-initialization from the helpers.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20240424122834.19801-4-hdegoede@redhat.com
|
|
1394 OHCI driver generates packet data for the response subaction to the
request subaction to some local registers. In the case, the driver should
assign timestamp to them by itself.
This commit fulfills the timestamp for the subaction.
Cc: stable@vger.kernel.org
Fixes: dcadfd7f7c74 ("firewire: core: use union for callback of transaction completion")
Link: https://lore.kernel.org/r/20240429084709.707473-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
Provide a hotkey_poll_stop_sync() dummy implementation when
CONFIG_THINKPAD_ACPI_HOTKEY_POLL, so that the #ifdef-ery around
hotkey_poll_stop_sync() can be removed from hotkey_exit().
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-3-hdegoede@redhat.com
|
|
hotkey_exit() already takes the mutex around the hotkey_poll_stop_sync()
call, but not around the other calls.
commit 38831eaf7d4c ("platform/x86: thinkpad_acpi: use lockdep
annotations") has added lockdep_assert_held() checks to various hotkey
functions.
These lockdep_assert_held() checks fail causing WARN() backtraces in
dmesg due to missing locking in hotkey_exit(), fix this.
Fixes: 38831eaf7d4c ("platform/x86: thinkpad_acpi: use lockdep annotations")
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-2-hdegoede@redhat.com
|
|
packet contents
Ensure that packet_buffer_get respects the user_length provided. If
the length of the head packet exceeds the user_length, packet_buffer_get
will now return 0 to signify to the user that no data were read
and a larger buffer size is required. Helps prevent user space overflows.
Signed-off-by: Thanassis Avgerinos <thanassis.avgerinos@gmail.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
Clean up i915_reg.h.
v2: Drop a redundant comment (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/679b7395a78c53006ac07448706f1809b74810de.1714128645.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Clean up i915_reg.h.
v2: Drop chicken regs and comments (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aa9b5d8adefbe97e1e37c9cfada3ab1581b0e8d5.1714128645.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
For some reason the paletter registers were missed when adding
intel_color_regs.h. Finish the job. Adjust some comments while at it.
v2: Fix comments (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1322f577b113b8fc1a6c2ef35340fc3c599b4bcb.1714128645.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
There are too few registers to warrant a dedicated file for LPE audio
regs, but the audio reg file is better than i915_reg.h.
v2: Rebase
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b5ee35309b2e0905aaa12d944b3d379c45a8a0bd.1714128645.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
In __pci_register_driver(), the pci core overwrites the dev_groups field of
the embedded struct device_driver with the dev_groups from the outer
struct pci_driver unconditionally.
Set dev_groups in the pci_driver to make sure it is used.
This was broken since the introduction of pvpanic-pci.
Fixes: db3a4f0abefd ("misc/pvpanic: add PCI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Fixes: ded13b9cfd59 ("PCI: Add support for dev_groups to struct pci_driver")
Link: https://lore.kernel.org/r/20240411-pvpanic-pci-dev-groups-v1-1-db8cb69f1b09@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Shutdown requests are normally hardware dependent.
By extending pvpanic to also handle shutdown requests, guests can
submit such requests with an easily implementable and cross-platform
mechanism.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240412-pvpanic-shutdown-v3-1-c214e9873b3f@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove 'default n' attribute of 'LATTICE_ECP3_CONFIG' option
because it is redundant. 'n' is automatic default value when
one is not specified.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Link: https://lore.kernel.org/r/20240412055221.69411-3-ppandit@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix indentation of SGI_GRU option's help text by adding
leading spaces. Generally help text is indented by two
more spaces beyond the leading tab <\t> character.
It helps Kconfig parsers to read file without error.
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Link: https://lore.kernel.org/r/20240412055221.69411-2-ppandit@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ID table already has respective entry and MODULE_DEVICE_TABLE and
creates proper alias for SPI driver. Having another MODULE_ALIAS causes
the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414154957.127113-3-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ID table already has respective entry and MODULE_DEVICE_TABLE and
creates proper alias for SPI driver. Having another MODULE_ALIAS causes
the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414154957.127113-1-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When calling qede_parse_actions() then the
return code was only used for a non-zero check,
and then -EINVAL was returned.
qede_parse_actions() can currently fail with:
* -EINVAL
* -EOPNOTSUPP
This patch changes the code to use the actual
return code, not just return -EINVAL.
The blaimed commit broke the implicit assumption
that only -EINVAL would ever be returned.
Only compile tested.
Fixes: 319a1d19471e ("flow_offload: check for basic action hw stats type")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In qede_flow_spec_to_rule(), when calling
qede_parse_flow_attr() then the return code
was only used for a non-zero check, and then
-EINVAL was returned.
qede_parse_flow_attr() can currently fail with:
* -EINVAL
* -EOPNOTSUPP
* -EPROTONOSUPPORT
This patch changes the code to use the actual
return code, not just return -EINVAL.
The blaimed commit introduced qede_flow_spec_to_rule(),
and this call to qede_parse_flow_attr(), it looks
like it just duplicated how it was already used.
Only compile tested.
Fixes: 37c5d3efd7f8 ("qede: use ethtool_rx_flow_rule() to remove duplicated parser code")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In qede_add_tc_flower_fltr(), when calling
qede_parse_flow_attr() then the return code
was only used for a non-zero check, and then
-EINVAL was returned.
qede_parse_flow_attr() can currently fail with:
* -EINVAL
* -EOPNOTSUPP
* -EPROTONOSUPPORT
This patch changes the code to use the actual
return code, not just return -EINVAL.
The blaimed commit introduced these functions.
Only compile tested.
Fixes: 2ce9c93eaca6 ("qede: Ingress tc flower offload (drop action) support.")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Explicitly set 'rc' (return code), before jumping to the
unlock and return path.
By not having any code depend on that 'rc' remains at
it's initial value of -EINVAL, then we can re-use 'rc' for
the return code of function calls in subsequent patches.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
