| Age | Commit message (Collapse) | Author |
|---|
|
Add the protoype for print ip state to be used
to print the registers in devcoredump during
a gpu reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Adding gfx10 gc registers to be used for register
dump via devcoredump during a gpu reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add the prototype to dump ip registers
for all ips of different asics and set
them to NULL for now. Based on the
requirement add a function pointer for
each of them.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add interface to reserve bad page.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
return 0 to avoid returning an uninitialized variable r
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Delete fence fallback timer to fix the ramdom
use-after-free issue.
v2: move to amdgpu_mes.c
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This avoids a potential conflict with firmwares with the newer
HDP flush mechanism.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Tune coarse grain clock gating idle threshold and rlc idle timeout to
achieve better kernel launch latency.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit d76c0a23b557c6ebb3fac32548100d76a1e0ce23.
This change must be reverted since it caused soft hangs when changing
the refresh rate to 122 & 144Hz when using a 7000 series GPU.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Mark Broadworth <Mark.Broadworth@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit addresses buffer overflow in the smu_v14_0_init_microcode
function. The issue was about the snprintf function writing more bytes
into the fw_name buffer than it can hold.
The line of code is:
snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
Here, snprintf is used to write a formatted string into fw_name. The
format is "amdgpu/%s.bin", where %s is a placeholder for the string
ucode_prefix. The sizeof(fw_name) argument tells snprintf the maximum
number of bytes it can write into fw_name, including the
null-terminating character. In the original code, fw_name is an array of
30 characters.
The string "amdgpu/%s.bin" could be up to 41 bytes long, which exceeds
the 30 bytes allocated for fw_name. This is because %s could be replaced
by ucode_prefix, which can be up to 29 characters long. Adding the 12
characters from "amdgpu/" and ".bin", the total length could be 41
characters.
To address this, the size of ucode_prefix has been reduced to 15
characters. This ensures that the maximum length of the string written into
fw_name does not exceed its capacity.
smu_13/14 etc. don't follow legacy scheme ie., amdgpu_ucode_legacy_naming
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c: In function ‘smu_v14_0_init_microcode’:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c:80:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
80 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~ ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c:80:9: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 30
80 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: fe6cd9152464 ("drm/amd/swsmu: add smu14 ip support")
Cc: Li Ma <li.ma@amd.com>
Cc: Likun Gao <Likun.Gao@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace tmz flag into buffer flag to make it easier to understand
and extend
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To adapt to different gc versions in gfx_v9_4_3.c file.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Here are the corrections needed for the queue ring buffer size
calculation for the following cases:
- Remove the KIQ VM flush ring usage.
- Add the invalidate TLBs packet for gfx10 and gfx11 queue.
- There's no VM flush and PFP sync, so remove the gfx9 real
ring and compute ring buffer usage.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Do VRAM accounting when doing migrations to vram to make sure
there is enough available VRAM and migrating to VRAM doesn't evict
other possible non-unified memory BOs. If migrating to VRAM fails,
driver can fall back to using system memory seamlessly.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
During mode-2 reset, pci config space registers are affected at device
side. However, certain platforms have switches which assign virtual BAR
addresses and returns the same even after device is reset. This
affects pci_restore_state() as it doesn't issue another config write, if
the value read is same as the saved value.
Add a workaround to write saved config space values from driver side.
Presently, these switches are in platforms with SMU v13.0.6 SOCs, hence
restrict the workaround only to those.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
umsch test needs full GPU functionality(e.g., VM update, TLB flush,
possibly buffer moving under memory pressure) which may be not ready
under these states. Just skip it to avoid potential issues.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Handle the case that the restore worker was already scheduled by another
eviction while the restore was in progress.
Fixes: 9a1c1339abf9 ("drm/amdkfd: Run restore_workers on freezable WQs")
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Yunxiang Li <Yunxiang.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- moxart: Fix regression for sg_miter for PIO mode
- sdhci-msm: Avoid hang by preventing access to suspended controller
- sdhci-of-dwcmshc: Fix SD card tuning error for th1520
* tag 'mmc-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: moxart: fix handling of sgm->consumed, otherwise WARN_ON triggers
mmc: sdhci-of-dwcmshc: th1520: Increase tuning loop count to 128
mmc: sdhci-msm: pervent access to suspended controller
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
"There has been OTP support improvements in the NVMEM subsystem, and
later also improvements of OTP support in the NAND subsystem. This
lead to situations that we currently cannot handle, so better prevent
this situation from happening in order to avoid canceling device's
probe.
In the raw NAND subsystem, two runtime fixes have been shared, one
fixing two important commands in the Qcom driver since it got reworked
and a NULL pointer dereference happening on STB chips.
Arnd also fixed a UBSAN link failure on diskonchip"
* tag 'mtd/fixes-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: limit OTP NVMEM cell parse to non-NAND devices
mtd: diskonchip: work around ubsan link failure
mtd: rawnand: qcom: Fix broken OP_RESET_DEVICE command in qcom_misc_cmd_type_exec()
mtd: rawnand: brcmnand: Fix data access violation for STB chip
|
|
This pattern of strncpy with some pointer arithmetic setting fixed-sized
intervals with string literal data is a bit weird so let's use
ethtool_puts() as this has more obvious behavior and is less-error
prone.
Nicely, we also get to drop a usage of the now deprecated strncpy() [1].
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://github.com/KSPP/linux/issues/90
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240425-strncpy-drivers-net-dsa-lan9303-core-c-v4-1-9fafd419d7bb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This replaces the formerly dynamically allocated struct device. This
allows to additionally use it to track the lifetime of the struct
pwm_chip. Otherwise the new struct device provides the same sysfs API as
was provided by the dynamic device before.
Link: https://lore.kernel.org/r/35c65ea7f6de789a568ff39d7b6b4ce80de4b7dc.1710670958.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
It's required to not free the memory underlying a requested PWM
while a consumer still has a reference to it. While currently a pwm_chip
doesn't live long enough in all cases, linking the struct pwm to the
pwm_chip results in the right lifetime as soon as the pwmchip is living
long enough. This happens with the following commits.
Note this is a breaking change for all pwm drivers that don't use
pwmchip_alloc().
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> # for struct_size() and __counted_by()
Link: https://lore.kernel.org/r/7e9e958841f049026c0023b309cc9deecf0ab61d.1710670958.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
With the upcoming restructuring having all in a single file simplifies
things a bit. The relevant and somewhat visible changes are:
- Some dropped prototypes from include/linux/pwm.h that were only
necessary that core.c has a declaration of the symbols defined in
sysfs.c. The respective functions are static now.
- The pwm class now also exists if CONFIG_SYSFS isn't enabled. Having
CONFIG_SYSFS is not very relevant today, but even without it the
class and device stuff still provides lifetime tracking.
- Both files had an initcall, these are merged into a single one now.
Instead of a big #ifdef block for CONFIG_DEBUG_FS, a single
if (IS_ENABLED(CONFIG_DEBUG_FS)) is used now. This increases compile
coverage a bit and is a tad nicer on the eyes.
Link: https://lore.kernel.org/r/9e2d39a5280d7dda5bfc6682a8aef510148635b2.1710670958.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
The code handling the sysfs API uses "child" and "parent" to refer to
the devices corresponding to a struct pwm or a struct pwm_chip
respectively.
Other parts of the pwm core use "parent" to refer to the parent device of
a struct pwm_chip.
So rename "child" to "pwm_dev" and "parent" to "pwmchip_dev" which
better explains the semantic. Also two functions are changed to match
the new names:
child_to_pwm_export() -> pwmexport_from_dev()
child_to_pwm_device() -> pwm_from_dev()
(which have the additional advantage to start with "pwm" which gives the
right scope). Additionally introduce a wrapper for dev_get_drvdata() to
convert a pwmchip_dev to the respective pwm_chip.
Link: https://lore.kernel.org/r/9cc05aceeae2f06ecb850bccb15ba821e768c183.1710670958.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
While the compiler probably optimizes out the pointer dereference, using
the local variable holding the same value also benefits the human
reader. So simplify accordingly. Also move a loop over all capture lines
into the capture if block to group the operations related to capturing
in .probe().
Link: https://lore.kernel.org/r/a7a81f3838f7ed7f4d6dbee3d646989cc265f676.1710068192.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
Using a multiplication to calculate the size of an allocation isn't
recommended in case the mulitplication overflows. While the chance this
happens is low, preventing such an error is easy enough; so do that.
Link: https://lore.kernel.org/r/17062aef42e6677629a056e25c6916d8b6eaedeb.1710068192.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
Instead of (arbitrarily?) spliting the per-chip driver data into two
structures, put everything into struct sti_pwm_chip. This reduces memory
management overhead and a few pointer indirections.
Link: https://lore.kernel.org/r/2788a421ec838ee8f63e76a78b04e1d48b49f959.1710068192.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
The .regfield member of struct sti_pwm_compat_data only holds a pointer
to the global array sti_pwm_regfields. Replace the few usages by
directly using this array and drop the member, saving a bit of memory
and a few pointer dereferences.
Link: https://lore.kernel.org/r/7ddb76ef49fd84a07713b46c65374cb51f3b4ac0.1710068192.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This has the advantage of handling EPROBE_DEFER correctly and being more
compact.
This change also introduces an error message for a few error paths that
lacked an error indicator before. Also sti_pwm_probe_dt() is renamed to
sti_pwm_probe_regmap() to better fit what it actually does.
Link: https://lore.kernel.org/r/8e540733ab882f2b8873712faf85c4f0cb48133a.1710068192.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
Instead of of_clk_get_by_name() use devm_clk_get_prepared() which has
several advantages:
- Combines getting the clock and a call to clk_prepare(). The latter
can be dropped from sti_pwm_probe() accordingly.
- Cares for calling clk_put() which is missing in both probe's error
path and the remove function.
- Cares for calling clk_unprepare() which can be dropped from the error
paths and the remove function. (Note that not all error path got this
right.)
With additionally using devm_pwmchip_add() instead of pwmchip_add() the
remove callback can be dropped completely. With it the last user of
platform_get_drvdata() goes away and so platform_set_drvdata() can be
dropped from the probe function, too.
Fixes: 378fe115d19d ("pwm: sti: Add new driver for ST's PWM IP")
Link: https://lore.kernel.org/r/81f0e1d173652f435afda6719adaed1922fe059a.1710068192.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
Memory holding a struct device must not be freed before the reference
count drops to zero. So a struct pwm_chip must not live in memory
freed by a driver on unbind. All in-tree drivers were fixed accordingly,
but as out-of-tree drivers, that were not adapted, still compile fine,
catch these in pwmchip_add().
Link: https://lore.kernel.org/r/35f5b229c98f78b2f6ce2397259a4a936be477c0.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This prepares the aspeed-g6-pwm-tacho driver to further changes of the
pwm core outlined in the commit introducing devm_pwmchip_alloc(). There
is no intended semantical change and the driver should behave as before.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/e95e41eea5a138ae206c9116ba3cb1d9e0178284.1710777536.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
struct pwm_chip::dev is about to change. To not have to touch this
driver in the same commit as struct pwm_chip::dev, use the accessor
function provided for exactly this purpose.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/5c6a11dd10cd29e0f7bfaa1fdef145523347cb58.1710777536.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a regression in pin access control in gpio-tegra186
- make data pointer dereference robust in Intel Tangier driver
* tag 'gpio-fixes-for-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: tegra186: Fix tegra186_gpio_is_accessible() check
gpio: tangier: Use correct type for the IRQ chip data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fix from Dave Jiang:
- Fix potential payload size confusion in cxl_mem_get_poison()
* tag 'cxl-fixes-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core: Fix potential payload size confusion in cxl_mem_get_poison()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix 6.9 regression so that DM device removal is performed
synchronously by default.
Asynchronous removal has always been possible but it isn't the
default. It is important that synchronous removal be preserved,
otherwise it is an interface change that breaks lvm2.
- Remove errant semicolon in drivers/md/dm-vdo/murmurhash3.c
* tag 'for-6.9/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: restore synchronous close of device mapper block device
dm vdo murmurhash: remove unneeded semicolon
|
|
Pull drm fixes from Dave Airlie:
"Regular weekly merge request, mostly amdgpu and misc bits in
xe/etnaviv/gma500 and some core changes. Nothing too outlandish, seems
to be about normal for this time of release.
atomic-helpers:
- Fix memory leak in drm_format_conv_state_copy()
fbdev:
- fbdefio: Fix address calculation
amdgpu:
- Suspend/resume fix
- Don't expose gpu_od directory if it's empty
- SDMA 4.4.2 fix
- VPE fix
- BO eviction fix
- UMSCH fix
- SMU 13.0.6 reset fixes
- GPUVM flush accounting fix
- SDMA 5.2 fix
- Fix possible UAF in mes code
amdkfd:
- Eviction fence handling fix
- Fix memory leak when GPU memory allocation fails
- Fix dma-buf validation
- Fix rescheduling of restore worker
- SVM fix
gma500:
- Fix crash during boot
etnaviv:
- fix GC7000 TX clock gating
- revert NPU UAPI changes
xe:
- Fix error paths on managed allocations
- Fix PF/VF relay messages"
* tag 'drm-fixes-2024-04-26' of https://gitlab.freedesktop.org/drm/kernel: (23 commits)
Revert "drm/etnaviv: Expose a few more chipspecs to userspace"
drm/etnaviv: fix tx clock gating on some GC7000 variants
drm/xe/guc: Fix arguments passed to relay G2H handlers
drm/xe: call free_gsc_pkt only once on action add failure
drm/xe: Remove sysfs only once on action add failure
fbdev: fix incorrect address computation in deferred IO
drm/amdgpu/mes: fix use-after-free issue
drm/amdgpu/sdma5.2: use legacy HDP flush for SDMA2/3
drm/amdgpu: Fix the ring buffer size for queue VM flush
drm/amdkfd: Add VRAM accounting for SVM migration
drm/amd/pm: Restore config space after reset
drm/amdgpu/umsch: don't execute umsch test when GPU is in reset/suspend
drm/amdkfd: Fix rescheduling of restore worker
drm/amdgpu: Update BO eviction priorities
drm/amdgpu/vpe: fix vpe dpm setup failed
drm/amdgpu: Assign correct bits for SDMA HDP flush
drm/amdgpu/pm: Remove gpu_od if it's an empty directory
drm/amdkfd: make sure VM is ready for updating operations
drm/amdgpu: Fix leak when GPU memory allocation fails
drm/amdkfd: Fix eviction fence handling
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into for-next
MediaTek driver fixes for v6.9
This fixes the MediaTek SVS driver to look for the right thermal zone
names, and adds a missing Kconfig dependency for mtk-socinfo.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add quirks table to get CPPC capabilities issue fixed by providing
correct perf or frequency values while driver loading.
If CPPC capabilities are not defined in the ACPI tables or wrongly
defined by platform firmware, it needs to use quick to get those
issues fixed with correct workaround values to make pstate driver
can be loaded even though there are CPPC capabilities errors.
The workaround will match the broken BIOS which lack of CPPC capabilities
nominal_freq and lowest_freq definition in the ACPI table.
$ cat /sys/devices/system/cpu/cpu0/acpi_cppc/lowest_freq
0
$ cat /sys/devices/system/cpu/cpu0/acpi_cppc/nominal_freq
0
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The amd-pstate driver can fail when _CPC objects are not supported by
the CPU. However, the current error message is ambiguous (see below) and
there is no clear way for attributing the failure of the amd-pstate
driver to the lack of CPPC support.
[ 0.477523] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
Fix this by adding an debug message to notify the user if the amd-pstate
driver failed to load due to CPPC not be supported by the CPU
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Make pstate driver initially retrieve the P-state transition delay and
latency values from the BIOS ACPI tables which has more reasonable
delay and latency values according to the platform design and
requirements.
Previously there values were hardcoded at specific value which may
have conflicted with platform and it might not reflect the most
accurate or optimized setting for the processor.
[054h 0084 8] Preserve Mask : FFFFFFFF00000000
[05Ch 0092 8] Write Mask : 0000000000000001
[064h 0100 4] Command Latency : 00000FA0
[068h 0104 4] Maximum Access Rate : 0000EA60
[06Ch 0108 2] Minimum Turnaround Time : 0000
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The amd-pstate driver cannot work when the min_freq, nominal_freq or
the max_freq is zero. When this happens it is prudent to error out
early on rather than waiting failing at the time of the governor
initialization.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
amd_get_{min,max,nominal,lowest_nonlinear}_freq() functions merely
return cpudata->{min,max,nominal,lowest_nonlinear}_freq values.
There is no loss in readability in replacing their invocations by
accesses to the corresponding members of cpudata.
Do so and remove these helper functions.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Li Meng <li.meng@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
{max,min,nominal,lowest_nonlinear}_freq
Currently the amd_get_{min, max, nominal, lowest_nonlinear}_freq()
helpers computes the values of min_freq, max_freq, nominal_freq and
lowest_nominal_freq respectively afresh from
cppc_get_perf_caps(). This is not necessary as there are fields in
cpudata to cache these values.
To simplify this, add a single helper function named
amd_pstate_init_freq() which computes all these frequencies at once, and
caches it in cpudata.
Use the cached values everywhere else in the code.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Li Meng <li.meng@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Co-developed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The UEFI DSD Guide specifies a number of GUIDs supported by the _DSD
parser. Point to the DSD Guide in the documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently, when kdb is compiled with keyboard support, then we will use
schedule_work() to provoke reset of the keyboard status. Unfortunately
schedule_work() gets called from the kgdboc post-debug-exception
handler. That risks deadlock since schedule_work() is not NMI-safe and,
even on platforms where the NMI is not directly used for debugging, the
debug trap can have NMI-like behaviour depending on where breakpoints
are placed.
Fix this by using the irq work system, which is NMI-safe, to defer the
call to schedule_work() to a point when it is safe to call.
Reported-by: Liuye <liu.yeC@h3c.com>
Closes: https://lore.kernel.org/all/20240228025602.3087748-1-liu.yeC@h3c.com/
Cc: stable@vger.kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240424-kgdboc_fix_schedule_work-v2-1-50f5a490aec5@linaro.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into for-next
MediaTek driver fixes for v6.9
This fixes the MediaTek SVS driver to look for the right thermal zone
names, and adds a missing Kconfig dependency for mtk-socinfo.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into for-next
Qualcomm driver fix for v6.9
This reworks the memory layout of the argument buffers passed to trusted
applications in QSEECOM, to avoid failures and system crashes.
* tag 'qcom-drivers-fixes-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: uefisecapp: Fix memory related IO errors and crashes
Link: https://lore.kernel.org/r/20240420163816.1133528-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add the wake event for the EQOS ethernet controller on Tegra194 and
Tegra234 devices, so that system can be woken up by an event from this
ethernet controller.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Since commit 1b2ac5a6d61f ("s390/3270: use new address translation
helpers") rq->buffer is passed unconditionally to virt_to_dma32().
The 3270 driver allocates requests without buffer, so the value passed
to virt_to_dma32 might be NULL. Check for NULL before assigning.
Fixes: 1b2ac5a6d61f ("s390/3270: use new address translation helpers")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
