summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-01-16USB: serial: option: add Quectel EM05CN (SG) modemDuke Xin(辛安文)
The EM05CN (SG) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "MBIM" : AT + MBIM + DIAG + NMEA + MODEM "RMNET" : AT + DIAG + NMEA + Modem + QMI The detailed description of the USB configuration for each mode as follows: MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0310 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0310 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16USB: serial: cp210x: add SCALANCE LPE-9000 device idMichael Adler
Add the USB serial console device ID for Siemens SCALANCE LPE-9000 which have a USB port for their serial console. Signed-off-by: Michael Adler <michael.adler@siemens.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16USB: serial: option: add Quectel EC200U modemAli Mirghasemi
Add support for EC200U modem 0x0901: EC200U - AT + AP + CP + NMEA + DIAG + MOS usb-device output: T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0901 Rev= 3.18 S: Manufacturer=Android S: Product=Android C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 512 Ivl=4096ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 512 Ivl=4096ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Ali Mirghasemi <ali.mirghasemi1376@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16USB: serial: option: add Quectel EM05-G (RS) modemDuke Xin(辛安文)
The EM05-G (RS) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0314 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0314 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-15media: uvcvideo: Silence memcpy() run-time false positive warningsKees Cook
The memcpy() in uvc_video_decode_meta() intentionally copies across the length and flags members and into the trailing buf flexible array. Split the copy so that the compiler can better reason about (the lack of) buffer overflows here. Avoid the run-time false positive warning: memcpy: detected field-spanning write (size 12) of single field "&meta->length" at drivers/media/usb/uvc/uvc_video.c:1355 (size 1) Additionally fix a typo in the documentation for struct uvc_meta_buf. Reported-by: ionut_n2001@yahoo.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=216810 Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Quirk for autosuspend in Logitech B910 and C910Ricardo Ribalda
Logitech B910 and C910 firmware are unable to recover from a USB autosuspend. When it resumes, the device is in a state where it only produces invalid frames. Eg: $ echo 0xFFFF > /sys/module/uvcvideo/parameters/trace # enable verbose log $ yavta -c1 -n1 --file='frame#.jpg' --format MJPEG --size=1920x1080 /dev/video1 [350438.435219] uvcvideo: uvc_v4l2_open [350438.529794] uvcvideo: Resuming interface 2 [350438.529801] uvcvideo: Resuming interface 3 [350438.529991] uvcvideo: Trying format 0x47504a4d (MJPG): 1920x1080. [350438.529996] uvcvideo: Using default frame interval 33333.3 us (30.0 fps). [350438.551496] uvcvideo: uvc_v4l2_mmap [350438.555890] uvcvideo: Device requested 3060 B/frame bandwidth. [350438.555896] uvcvideo: Selecting alternate setting 11 (3060 B/frame bandwidth). [350438.556362] uvcvideo: Allocated 5 URB buffers of 32x3060 bytes each. [350439.316468] uvcvideo: Marking buffer as bad (error bit set). [350439.316475] uvcvideo: Frame complete (EOF found). [350439.316477] uvcvideo: EOF in empty payload. [350439.316484] uvcvideo: frame 1 stats: 149/261/417 packets, 1/149/417 pts (early initial), 416/417 scr, last pts/stc/sof 2976325734/2978107243/249 [350439.384510] uvcvideo: Marking buffer as bad (error bit set). [350439.384516] uvcvideo: Frame complete (EOF found). [350439.384518] uvcvideo: EOF in empty payload. [350439.384525] uvcvideo: frame 2 stats: 265/379/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2979524454/2981305193/316 [350439.448472] uvcvideo: Marking buffer as bad (error bit set). [350439.448478] uvcvideo: Frame complete (EOF found). [350439.448480] uvcvideo: EOF in empty payload. [350439.448487] uvcvideo: frame 3 stats: 265/377/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2982723174/2984503144/382 ...(loop)... The devices can leave this invalid state if the alternate setting of the streaming interface is toggled. This patch adds a quirk for this device so it can be autosuspended properly. lsusb -v: Bus 001 Device 049: ID 046d:0821 Logitech, Inc. HD Webcam C910 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x046d Logitech, Inc. idProduct 0x0821 HD Webcam C910 bcdDevice 0.10 iManufacturer 0 iProduct 0 iSerial 1 390022B0 bNumConfigurations 1 Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Fix race condition with usb_kill_urbRicardo Ribalda
usb_kill_urb warranties that all the handlers are finished when it returns, but does not protect against threads that might be handling asynchronously the urb. For UVC, the function uvc_ctrl_status_event_async() takes care of control changes asynchronously. If the code is executed in the following order: CPU 0 CPU 1 ===== ===== uvc_status_complete() uvc_status_stop() uvc_ctrl_status_event_work() uvc_status_start() -> FAIL Then uvc_status_start will keep failing and this error will be shown: <4>[ 5.540139] URB 0000000000000000 submitted while active drivers/usb/core/urb.c:378 usb_submit_urb+0x4c3/0x528 Let's improve the current situation, by not re-submiting the urb if we are stopping the status event. Also process the queued work (if any) during stop. CPU 0 CPU 1 ===== ===== uvc_status_complete() uvc_status_stop() uvc_status_start() uvc_ctrl_status_event_work() -> FAIL Hopefully, with the usb layer protection this should be enough to cover all the cases. Cc: stable@vger.kernel.org Fixes: e5225c820c05 ("media: uvcvideo: Send a control event when a Control Change interrupt arrives") Reviewed-by: Yunke Cao <yunkec@chromium.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Use standard names for menusRicardo Ribalda
Instead of duplicating the menu info, use the one from the core. Also, do not use extra memory for 1:1 mappings. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Fix power line control for Lenovo Integrated CameraRicardo Ribalda
The device does not implement the power line frequenyc control correctly. It is a UVC 1.5 device, but implements the control as a UVC 1.1 device. Add the corresponding control mapping override. Bus 003 Device 002: ID 30c9:0093 Lenovo Integrated Camera Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.01 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x30c9 idProduct 0x0093 bcdDevice 0.07 iManufacturer 3 Lenovo iProduct 1 Integrated Camera iSerial 2 8SSC21J75356V1SR2830069 bNumConfigurations 1 Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Refactor power_line_frequency_controls_limitedRicardo Ribalda
Move the control mapping to uvc_ctrl.c. This way we do not have references to UVC controls or V4L2 controls in uvc_driver.c. This also fixes a bug introduced in commit 382075604a68 ("media: uvcvideo: Limit power line control for Quanta UVC Webcam"). The offending commit caused the power line control menu entries to have incorrect indices compared to the V4L2_CID_POWER_LINE_FREQUENCY_* enumeration. Now that the limited mapping reuses the correct menu_info array, the indices correctly map to the V4L2 control specification. Fixes: 382075604a68 ("media: uvcvideo: Limit power line control for Quanta UVC Webcam") Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Refactor uvc_ctrl_mappings_uvcXXRicardo Ribalda
Convert the array of structs into an array of pointers, that way the mappings can be reused. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Implement mask for V4L2_CTRL_TYPE_MENURicardo Ribalda
Replace the count with a mask field that lets us choose not only the max value, but also the minimum value and what values are valid in between. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Extend documentation of uvc_video_clock_decode()Ricardo Ribalda
Make an explicit reference to UVC 1.5, explaining how the algorithm supports the different behaviour of UVC 1.1 and 1.5. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: HungNien Chen <hn.chen@sunplusit.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Limit power line control for Acer EasyCameraRicardo Ribalda
The device does not implement the power line control correctly. Add a corresponding control mapping override. Bus 003 Device 002: ID 5986:1180 Acer, Inc EasyCamera Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x5986 Acer, Inc idProduct 0x1180 bcdDevice 56.04 iManufacturer 3 Bison iProduct 1 EasyCamera iSerial 2 bNumConfigurations 1 Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Refactor __uvc_ctrl_add_mappingRicardo Ribalda
Simplify the exit code with a common error tag freeing all the memory. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Fix handling on Bitmask controlsRicardo Ribalda
Minimum and step values for V4L2_CTRL_TYPE_BITMASK controls should be 0. There is no need to query the camera firmware about this and maybe get invalid results. Also value should be masked to the max value advertised by the hardware. Finally, handle UVC 1.5 mask controls that use MAX instead of RES to describe the valid bits. Fixes v4l2-compliane: Control ioctls (Input 0): fail: v4l2-test-controls.cpp(97): minimum must be 0 for a bitmask control test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: FAIL Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Do not return positive errors in uvc_query_ctrl()Ricardo Ribalda
If the returned size of the query does not match the expected size or it is zero, return -EPIPE instead of 0 or a positive value. This will avoid confusing the caller (and ultimately userspace) that doesn't expect a positive or zero value. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Return -EACCES for Wrong state errorRicardo Ribalda
Error 2 is defined by UVC as: Wrong State: The device is in a state that disallows the specific request. The device will remain in this state until a specific action from the host or the user is completed. This is documented as happening when attempting to set the value of a manual control when the device is in auto mode. While V4L2 allows this, the closest error code defined by VIDIOC_S_CTRL is EACCES: EACCES: Attempt to set a read-only control or to get a write-only control. Or if there is an attempt to set an inactive control and the driver is not capable of caching the new value until the control is active again. Replace EILSEQ with EACCES. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Improve error logging in uvc_query_ctrl()Hans Verkuil
Standard use of the driver may result in error messages on the kernel log. This can hide other more important messages, and alert unnecessarily the user. Let's keep dev_err() for the important occasions. If __uvc_query_ctrl() failed with a non -EPIPE error, then report that with dev_err. If an error code is obtained, then report that with dev_dbg. Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()Hans Verkuil
Check for inactive controls in uvc_ctrl_is_accessible(). Use the new value for the master_id controls if present, otherwise use the existing value to determine if it is OK to set the control. Doing this here avoids attempting to set an inactive control, which will return an error from the USB device, which returns an invalid errorcode. This fixes: warn: v4l2-test-controls.cpp(483): s_ctrl returned EIO   warn: v4l2-test-controls.cpp(483): s_ctrl returned EIO test VIDIOC_G/S_CTRL: OK   warn: v4l2-test-controls.cpp(739): s_ext_ctrls returned EIO   warn: v4l2-test-controls.cpp(739): s_ext_ctrls returned EIO   warn: v4l2-test-controls.cpp(816): s_ext_ctrls returned EIO test VIDIOC_G/S/TRY_EXT_CTRLS: OK Tested with: v4l2-ctl -c auto_exposure=1 OK v4l2-ctl -c exposure_time_absolute=251 OK v4l2-ctl -c auto_exposure=3 OK v4l2-ctl -c exposure_time_absolute=251 VIDIOC_S_EXT_CTRLS: failed: Input/output error exposure_time_absolute: Input/output error ERROR v4l2-ctl -c auto_exposure=3,exposure_time_absolute=251,auto_exposure=1 v4l2-ctl -C auto_exposure,exposure_time_absolute   auto_exposure: 1 exposure_time_absolute: 251 Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Factor out usb_string() callsLaurent Pinchart
When parsing UVC descriptors to instantiate entities, the driver calls usb_string() to retrieve the entity name from the device, and falls back to a default name if the string can't be retrieved. This code pattern occurs multiple times. Factor it out to a separate helper function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2023-01-15media: uvcvideo: Limit power line control for Acer EasyCameraRicardo Ribalda
The device does not implement the power line control correctly. Add a corresponding control mapping override. Bus 003 Device 002: ID 5986:1180 Acer, Inc EasyCamera Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x5986 Acer, Inc idProduct 0x1180 bcdDevice 56.04 iManufacturer 3 Bison iProduct 1 EasyCamera iSerial 2 bNumConfigurations 1 Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Recover stalled ElGato devicesRicardo Ribalda
Elgato Cam Link 4k can be in a stalled state if the resolution of the external source has changed while the firmware initializes. Once in this state, the device is useless until it receives a USB reset. It has even been observed that the stalled state will continue even after unplugging the device. lsusb -v Bus 002 Device 002: ID 0fd9:0066 Elgato Systems GmbH Cam Link 4K Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 9 idVendor 0x0fd9 Elgato Systems GmbH idProduct 0x0066 bcdDevice 0.00 iManufacturer 1 Elgato iProduct 2 Cam Link 4K iSerial 4 0005AC52FE000 bNumConfigurations 1 Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Remove void casting for the status endpointRicardo Ribalda
Make the code more resilient, by replacing the castings with proper structure definitions and using offsetof() instead of open coding the location of the data. Suggested-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Fix usage of symbolic permissions to octalPedro Guilherme Siqueira Moreira
Change symbolic permissions to octal equivalents as recommended by scripts/checkpatch.pl on drivers/media/usb/uvc/uvc_driver.c. Signed-off-by: Pedro Guilherme Siqueira Moreira <pedro.guilherme@espectro.eng.br> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Fix assignment inside if conditionPedro Guilherme Siqueira Moreira
Fixes 'do not use assignment in if condition' errors issued by scripts/checkpatch.pl on drivers/media/usb/uvc/uvc_driver.c Signed-off-by: Pedro Guilherme Siqueira Moreira <pedro.guilherme@espectro.eng.br> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Fix missing newline after declarationsPedro Guilherme Siqueira Moreira
Fixes 'Missing a blank line after declarations' warning issued by scripts/checkpatch.pl on drivers/media/usb/uvc/uvc_driver.c Signed-off-by: Pedro Guilherme Siqueira Moreira <pedro.guilherme@espectro.eng.br> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Handle errors from calls to usb_stringGuenter Roeck
On a Webcam from Quanta, we see the following error. usb 3-5: New USB device found, idVendor=0408, idProduct=30d2, bcdDevice= 0.03 usb 3-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2 usb 3-5: Product: USB2.0 HD UVC WebCam usb 3-5: Manufacturer: Quanta usb 3-5: SerialNumber: 0x0001 ... uvcvideo: Found UVC 1.10 device USB2.0 HD UVC WebCam (0408:30d2) uvcvideo: Failed to initialize entity for entity 5 uvcvideo: Failed to register entities (-22). The Webcam reports an entity of type UVC_VC_EXTENSION_UNIT. It reports a string index of '7' associated with that entity. The attempt to read that string from the camera fails with error -32 (-EPIPE). usb_string() returns that error, but it is ignored. As result, the entity name is empty. This later causes v4l2_device_register_subdev() to return -EINVAL, and no entities are registered as result. While this appears to be a firmware problem with the camera, the kernel should still handle the situation gracefully. To do that, check the return value from usb_string(). If it reports an error, assign the entity's default name. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Only create input devs if hw supports itRicardo Ribalda
Examine the stream headers to figure out if the device has a button and can be used as an input. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Handle cameras with invalid descriptorsRicardo Ribalda
If the source entity does not contain any pads, do not create a link. Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-15media: uvcvideo: Remove format descriptionsLaurent Pinchart
The V4L2 core overwrites format descriptions in v4l_fill_fmtdesc(), there's no need to manually set the descriptions in the driver. This prepares for removal of the format descriptions from the uvc_fmts table. Unlike V4L2, UVC makes a distinction between the SD-DV, SDL-DV and HD-DV formats. It also indicates whether the DV format uses 50Hz or 60Hz. This information is parsed by the driver to construct a format name string that is printed in a debug message, but serves no other purpose as V4L2 has a single V4L2_PIX_FMT_DV pixel format that covers all those cases. As the information is available in the UVC descriptors, and thus accessible to users with lsusb if they really care, don't log it in a debug message and drop the format name string to simplify the code. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
2023-01-15Merge tag 'edac_urgent_for_v6.2_rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fixes from Borislav Petkov: - Fix the EDAC device's confusion in the polling setting units - Fix a memory leak in highbank's probing function * tag 'edac_urgent_for_v6.2_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/highbank: Fix memory leak in highbank_mc_probe() EDAC/device: Fix period calculation in edac_device_reset_delay_period()
2023-01-14Merge tag 'iommu-fixes-v6.2-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Core: Fix an iommu-group refcount leak - Fix overflow issue in IOVA alloc path - ARM-SMMU fixes from Will: - Fix VFIO regression on NXP SoCs by reporting IOMMU_CAP_CACHE_COHERENCY - Fix SMMU shutdown paths to avoid device unregistration race - Error handling fix for Mediatek IOMMU driver * tag 'iommu-fixes-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/mediatek-v1: Fix an error handling path in mtk_iommu_v1_probe() iommu/iova: Fix alloc iova overflows issue iommu: Fix refcount leak in iommu_device_claim_dma_owner iommu/arm-smmu-v3: Don't unregister on shutdown iommu/arm-smmu: Don't unregister on shutdown iommu/arm-smmu: Report IOMMU_CAP_CACHE_COHERENCY even betterer
2023-01-14iio: hid: fix the retval in gyro_3d_capture_sampleDmitry Perchanov
Return value should be zero for success. This was forgotten for timestamp feature. Verified on RealSense cameras. Fixes: 4648cbd8fb92 ("iio: hid-sensor-gyro-3d: Add timestamp channel") Signed-off-by: Dmitry Perchanov <dmitry.perchanov@intel.com> Link: https://lore.kernel.org/r/7c1809dc74eb2f58a20595f4d02e76934f8e9219.camel@intel.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-14iio: hid: fix the retval in accel_3d_capture_sampleDmitry Perchanov
Return value should be zero for success. This was forgotten for timestamp feature. Verified on RealSense cameras. Fixes: a96cd0f901ee ("iio: accel: hid-sensor-accel-3d: Add timestamp") Signed-off-by: Dmitry Perchanov <dmitry.perchanov@intel.com> Link: https://lore.kernel.org/r/a6dc426498221c81fa71045b41adf782ebd42136.camel@intel.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-14Merge tag 'hardening-v6.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull kernel hardening fixes from Kees Cook: - Fix CFI hash randomization with KASAN (Sami Tolvanen) - Check size of coreboot table entry and use flex-array * tag 'hardening-v6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: kbuild: Fix CFI hash randomization with KASAN firmware: coreboot: Check size of table entry and use flex-array
2023-01-14Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two minor fixes in the hisi_sas driver which only impact enterprise style multi-expander and shared disk situations and no core changes" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: hisi_sas: Set a port invalid only if there are no devices attached when refreshing port id scsi: hisi_sas: Use abort task set to reset SAS disks when discovered
2023-01-14Merge tag 'ata-6.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ATA fix from Damien Le Moal: "A single fix to prevent building the pata_cs5535 driver with user mode linux as it uses msr operations that are not defined with UML" * tag 'ata-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_cs5535: Don't build on UML
2023-01-13net: lan966x: add missing fwnode_handle_put() for ports nodeClément Léger
Since the "ethernet-ports" node is retrieved using device_get_named_child_node(), it should be release after using it. Add missing fwnode_handle_put() and move the code that retrieved the node from device-tree to avoid complicated handling in case of error. Fixes: db8bcaad5393 ("net: lan966x: add the basic lan966x driver") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230112161311.495124-1-clement.leger@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13net: enetc: avoid deadlock in enetc_tx_onestep_tstamp()Vladimir Oltean
This lockdep splat says it better than I could: ================================ WARNING: inconsistent lock state 6.2.0-rc2-07010-ga9b9500ffaac-dirty #967 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kworker/1:3/179 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff3ec4036ce098 (_xmit_ETHER#2){+.?.}-{3:3}, at: netif_freeze_queues+0x5c/0xc0 {IN-SOFTIRQ-W} state was registered at: _raw_spin_lock+0x5c/0xc0 sch_direct_xmit+0x148/0x37c __dev_queue_xmit+0x528/0x111c ip6_finish_output2+0x5ec/0xb7c ip6_finish_output+0x240/0x3f0 ip6_output+0x78/0x360 ndisc_send_skb+0x33c/0x85c ndisc_send_rs+0x54/0x12c addrconf_rs_timer+0x154/0x260 call_timer_fn+0xb8/0x3a0 __run_timers.part.0+0x214/0x26c run_timer_softirq+0x3c/0x74 __do_softirq+0x14c/0x5d8 ____do_softirq+0x10/0x20 call_on_irq_stack+0x2c/0x5c do_softirq_own_stack+0x1c/0x30 __irq_exit_rcu+0x168/0x1a0 irq_exit_rcu+0x10/0x40 el1_interrupt+0x38/0x64 irq event stamp: 7825 hardirqs last enabled at (7825): [<ffffdf1f7200cae4>] exit_to_kernel_mode+0x34/0x130 hardirqs last disabled at (7823): [<ffffdf1f708105f0>] __do_softirq+0x550/0x5d8 softirqs last enabled at (7824): [<ffffdf1f7081050c>] __do_softirq+0x46c/0x5d8 softirqs last disabled at (7811): [<ffffdf1f708166e0>] ____do_softirq+0x10/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(_xmit_ETHER#2); <Interrupt> lock(_xmit_ETHER#2); *** DEADLOCK *** 3 locks held by kworker/1:3/179: #0: ffff3ec400004748 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0 #1: ffff80000a0bbdc8 ((work_completion)(&priv->tx_onestep_tstamp)){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0 #2: ffff3ec4036cd438 (&dev->tx_global_lock){+.+.}-{3:3}, at: netif_tx_lock+0x1c/0x34 Workqueue: events enetc_tx_onestep_tstamp Call trace: print_usage_bug.part.0+0x208/0x22c mark_lock+0x7f0/0x8b0 __lock_acquire+0x7c4/0x1ce0 lock_acquire.part.0+0xe0/0x220 lock_acquire+0x68/0x84 _raw_spin_lock+0x5c/0xc0 netif_freeze_queues+0x5c/0xc0 netif_tx_lock+0x24/0x34 enetc_tx_onestep_tstamp+0x20/0x100 process_one_work+0x28c/0x6c0 worker_thread+0x74/0x450 kthread+0x118/0x11c but I'll say it anyway: the enetc_tx_onestep_tstamp() work item runs in process context, therefore with softirqs enabled (i.o.w., it can be interrupted by a softirq). If we hold the netif_tx_lock() when there is an interrupt, and the NET_TX softirq then gets scheduled, this will take the netif_tx_lock() a second time and deadlock the kernel. To solve this, use netif_tx_lock_bh(), which blocks softirqs from running. Fixes: 7294380c5211 ("enetc: support PTP Sync packet one-step timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230112105440.1786799-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13net: wan: Add checks for NULL for utdm in undo_uhdlc_init and unmap_si_regsEsina Ekaterina
If uhdlc_priv_tsa != 1 then utdm is not initialized. And if ret != NULL then goto undo_uhdlc_init, where utdm is dereferenced. Same if dev == NULL. Found by Astra Linux on behalf of Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 8d68100ab4ad ("soc/fsl/qe: fix err handling of ucc_of_parse_tdm") Signed-off-by: Esina Ekaterina <eesina@astralinux.ru> Link: https://lore.kernel.org/r/20230112074703.13558-1-eesina@astralinux.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13scsi: target: core: Fix warning on RT kernelsMaurizio Lombardi
Calling spin_lock_irqsave() does not disable the interrupts on realtime kernels, remove the warning and replace assert_spin_locked() with lockdep_assert_held(). Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230110125310.55884-1-mlombard@redhat.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-13Merge tag 'block-6.2-2023-01-13' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: "Nothing major in here, just a collection of NVMe fixes and dropping a wrong might_sleep() that static checkers tripped over but which isn't valid" * tag 'block-6.2-2023-01-13' of git://git.kernel.dk/linux: MAINTAINERS: stop nvme matching for nvmem files nvme: don't allow unprivileged passthrough on partitions nvme: replace the "bool vec" arguments with flags in the ioctl path nvme: remove __nvme_ioctl nvme-pci: fix error handling in nvme_pci_enable() nvme-pci: add NVME_QUIRK_IDENTIFY_CNS quirk to Apple T2 controllers nvme-apple: add NVME_QUIRK_IDENTIFY_CNS quirk to fix regression block: Drop spurious might_sleep() from blk_put_queue()
2023-01-13Merge tag 'pci-v6.2-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fixes from Bjorn Helgaas: - Work around apparent firmware issue that made Linux reject MMCONFIG space, which broke PCI extended config space (Bjorn Helgaas) - Fix CONFIG_PCIE_BT1 dependency due to mid-air collision between a PCI_MSI_IRQ_DOMAIN -> PCI_MSI change and addition of PCIE_BT1 (Lukas Bulwahn) * tag 'pci-v6.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: x86/pci: Treat EfiMemoryMappedIO as reservation of ECAM space x86/pci: Simplify is_mmconf_reserved() messages PCI: dwc: Adjust to recent removal of PCI_MSI_IRQ_DOMAIN
2023-01-13firmware: coreboot: Check size of table entry and use flex-arrayKees Cook
The memcpy() of the data following a coreboot_table_entry couldn't be evaluated by the compiler under CONFIG_FORTIFY_SOURCE. To make it easier to reason about, add an explicit flexible array member to struct coreboot_device so the entire entry can be copied at once. Additionally, validate the sizes before copying. Avoids this run-time false positive warning: memcpy: detected field-spanning write (size 168) of single field "&device->entry" at drivers/firmware/google/coreboot_table.c:103 (size 8) Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Link: https://lore.kernel.org/all/03ae2704-8c30-f9f0-215b-7cdf4ad35a9a@molgen.mpg.de/ Cc: Jack Rosenthal <jrosenth@chromium.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Julius Werner <jwerner@chromium.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Link: https://lore.kernel.org/r/20230107031406.gonna.761-kees@kernel.org Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Link: https://lore.kernel.org/r/20230112230312.give.446-kees@kernel.org
2023-01-14ata: pata_cs5535: Don't build on UMLPeter Foley
This driver uses MSR functions that aren't implemented under UML. Avoid building it to prevent tripping up allyesconfig. e.g. /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x3a3): undefined reference to `__tracepoint_read_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x3d2): undefined reference to `__tracepoint_write_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x457): undefined reference to `__tracepoint_write_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x481): undefined reference to `do_trace_write_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x4d5): undefined reference to `do_trace_write_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x4f5): undefined reference to `do_trace_read_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x51c): undefined reference to `do_trace_write_msr' Signed-off-by: Peter Foley <pefoley2@pefoley.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2023-01-13phy: freescale: imx8m-pcie: Add one missing error returnRichard Zhu
There should be one error return when fail to fetch the perst reset. Add the missing error return. Fixes: dce9edff16ee ("phy: freescale: imx8m-pcie: Add i.MX8MP PCIe PHY support") Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/1671433941-2037-1-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-13phy: Revert "phy: qualcomm: usb28nm: Add MDM9607 init sequence"Marijn Suijten
This reverts commit 557a28811c7e0286d3816842032db5eb7bb5f156. This commit introduced an init sequence from downstream DT [1] in the driver. As mentioned by the comment above the HSPHY_INIT_CFG macro for this sequence: /* * The macro is used to define an initialization sequence. Each tuple * is meant to program 'value' into phy register at 'offset' with 'delay' * in us followed. */ Instead of corresponding to offsets into the phy register, the sequence read by the downstream driver [2] is passed into ulpi_write [3] which crafts the address-value pair into a new value and writes it into the same register at USB_ULPI_VIEWPORT [4]. In other words, this init sequence is programmed into the hardware in a totally different way than downstream and is unlikely to achieve the desired result, if the hsphy is working at all. An alternative method needs to be found to write these init values at the desired location. Fortunately mdm9607 did not land upstream yet [5] and should have its compatible revised to use the generic one, instead of a compatible that writes wrong data to the wrong registers. [1]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/arch/arm/boot/dts/qcom/mdm9607.dtsi#585 [2]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#4183 [3]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#468 [4]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#418 [5]: https://lore.kernel.org/linux-arm-msm/20210805222812.40731-1-konrad.dybcio@somainline.org/ Reported-by: Michael Srba <Michael.Srba@seznam.cz> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20221214223733.648167-1-marijn.suijten@somainline.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-13phy: rockchip-inno-usb2: Fix missing clk_disable_unprepare() in ↵Shang XiaoJing
rockchip_usb2phy_power_on() The clk_disable_unprepare() should be called in the error handling of rockchip_usb2phy_power_on(). Fixes: 0e08d2a727e6 ("phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/r/20221205115823.16957-1-shangxiaojing@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-13drm/vc4: bo: Fix unused variable warningMaxime Ripard
Commit 07a2975c65f2 ("drm/vc4: bo: Fix drmm_mutex_init memory hog") removed the only use of the ret variable, but didn't remove the variable itself leading to a unused variable warning. Remove that variable. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 07a2975c65f2 ("drm/vc4: bo: Fix drmm_mutex_init memory hog") Reviewed-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230113154637.1704116-1-maxime@cerno.tech
generated by cgit (git 2.34.1) at 2025-09-27 11:13:44 +0000