| Age | Commit message (Collapse) | Author |
|---|
|
Due to some chips may use different registers and offset, provide
a set trigger type call back and add one for old controller.
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220225055207.1048-4-qianggui.song@amlogic.com
|
|
Current meson gpio irqchip driver only support 8 channels for gpio irq
line, later chips may have more then 8 channels, so need to modify code
to support more.
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220225055207.1048-3-qianggui.song@amlogic.com
|
|
This fixes the following smatch warnings:
drivers/vdpa/vdpa_user/iova_domain.c:305 vduse_domain_alloc_iova() warn: should 'iova_pfn << shift' be a 64 bit type?
Fixes: 8c773d53fb7b ("vduse: Implement an MMU-based software IOTLB")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20220121083940.102-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
When control vq receives a VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command
request from the driver, presently there is no validation against the
number of queue pairs to configure, or even if multiqueue had been
negotiated or not is unverified. This may lead to kernel panic due to
uninitialized resource for the queues were there any bogus request
sent down by untrusted driver. Tie up the loose ends there.
Fixes: 52893733f2c5 ("vdpa/mlx5: Add multiqueue support")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Link: https://lore.kernel.org/r/1642206481-30721-4-git-send-email-si-wei.liu@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Per VIRTIO v1.1 specification, section 5.1.3.1 Feature bit requirements:
"VIRTIO_NET_F_MQ Requires VIRTIO_NET_F_CTRL_VQ".
There's assumption in the mlx5_vdpa multiqueue code that MQ must come
together with CTRL_VQ. However, there's nowhere in the upper layer to
guarantee this assumption would hold. Were there an untrusted driver
sending down MQ without CTRL_VQ, it would compromise various spots for
e.g. is_index_valid() and is_ctrl_vq_idx(). Although this doesn't end
up with immediate panic or security loophole as of today's code, the
chance for this to be taken advantage of due to future code change is
not zero.
Harden the crispy assumption by failing the set_driver_features() call
when seeing (MQ && !CTRL_VQ). For that end, verify_min_features() is
renamed to verify_driver_features() to reflect the fact that it now does
more than just validate the minimum features. verify_driver_features()
is now used to accommodate various checks against the driver features
for set_driver_features().
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Link: https://lore.kernel.org/r/1642206481-30721-3-git-send-email-si-wei.liu@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
No functional change introduced. vdpa bus driver such as virtio_vdpa
or vhost_vdpa is not supposed to take care of the locking for core
by its own. The locked API vdpa_set_features should suffice the
bus driver's need.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/1642206481-30721-2-git-send-email-si-wei.liu@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
* irq/misc-5.18:
: .
: Misc irq chip changes for 5.18
:
: - GICv3: Relax ordering of previous stores to only include the ISH domain
:
: - nvic: Unmap MMIo region on probe failure
:
: - xilinx: Switch to GENERIC_IRQ_MULTI_HANDLER when used on microblaze
: .
irqchip/xilinx: Switch to GENERIC_IRQ_MULTI_HANDLER
irqchip/nvic: Release nvic_base upon failure
irqchip/gic-v3: Use dsb(ishst) to order writes with ICC_SGI1R_EL1 accesses
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* irq/plic-cleanups:
: .
: SiFive PLIC cleanups from Niklas Cassel:
:
: - Clarify some of the namings in the driver
:
: - Make sure S-mode interrupts are disabled when running in M-mode
: .
irqchip/sifive-plic: Disable S-mode IRQs if running in M-mode
irqchip/sifive-plic: Improve naming scheme for per context offsets
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Register the Xilinx driver as the root interrupt controller using
the GENERIC_IRQ_MULTI_HANDLER API, instead of the arch-specific hack.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Stefan Asserhall <stefan.asserhall@xilinx.com>
[maz: repainted commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/e6c6595a81f662bf839cee3109d0fa58a596ea47.1646380284.git.michal.simek@xilinx.com
|
|
A common pattern for device reset is currently:
vdev->config->reset(vdev);
.. cleanup ..
reset prevents new interrupts from arriving and waits for interrupt
handlers to finish.
However if - as is common - the handler queues a work request which is
flushed during the cleanup stage, we have code adding buffers / trying
to get buffers while device is reset. Not good.
This was reproduced by running
modprobe virtio_console
modprobe -r virtio_console
in a loop.
Fix this up by calling virtio_break_device + flush before reset.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1786239
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Looks like most callers get driver/device removal wrong.
Document what's expected of callers.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The feature negotiation was designed in a way that
makes it possible for devices to know which config
fields will be accessed by drivers.
This is broken since commit 404123c2db79 ("virtio: allow drivers to
validate features") with fallout in at least block and net. We have a
partial work-around in commit 2f9a174f918e ("virtio: write back
F_VERSION_1 before validate") which at least lets devices find out which
format should config space have, but this is a partial fix: guests
should not access config space without acknowledging features since
otherwise we'll never be able to change the config space format.
To fix, split finalize_features from virtio_finalize_features and
call finalize_features with all feature bits before validation,
and then - if validation changed any bits - once again after.
Since virtio_finalize_features no longer writes out features
rename it to virtio_features_ok - since that is what it does:
checks that features are ok with the device.
As a side effect, this also reduces the amount of hypervisor accesses -
we now only acknowledge features once unless we are clearing any
features when validating (which is uncommon).
IRC I think that this was more or less always the intent in the spec but
unfortunately the way the spec is worded does not say this explicitly, I
plan to address this at the spec level, too.
Acked-by: Jason Wang <jasowang@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 404123c2db79 ("virtio: allow drivers to validate features")
Fixes: 2f9a174f918e ("virtio: write back F_VERSION_1 before validate")
Cc: "Halil Pasic" <pasic@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
virtio_finalize_features is only used internally within virtio.
No reason to export it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
There is an oddity in the way the RSR register flags propagate to the
ISR register (and the actual interrupt output) on this hardware: it
appears that RSR register bits only result in ISR being asserted if the
interrupt was actually enabled at the time, so enabling interrupts with
RSR bits already set doesn't trigger an interrupt to be raised. There
was already a partial fix for this race in the macb_poll function where
it checked for RSR bits being set and re-triggered NAPI receive.
However, there was a still a race window between checking RSR and
actually enabling interrupts, where a lost wakeup could happen. It's
necessary to check again after enabling interrupts to see if RSR was set
just prior to the interrupt being enabled, and re-trigger receive in that
case.
This issue was noticed in a point-to-point UDP request-response protocol
which periodically saw timeouts or abnormally high response times due to
received packets not being processed in a timely fashion. In many
applications, more packets arriving, including TCP retransmissions, would
cause the original packet to be processed, thus masking the issue.
Fixes: 02f7a34f34e3 ("net: macb: Re-enable RX interrupt only when RX is done")
Cc: stable@vger.kernel.org
Co-developed-by: Scott McNutt <scott.mcnutt@siriusxm.com>
Signed-off-by: Scott McNutt <scott.mcnutt@siriusxm.com>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
* drm/arm: Select DRM_GEM_CMEA_HELPER for HDLCD
* drm/bridge: ti-sn65dsi86: Properly undo autosuspend
* drm/vrr: Fix potential NULL-pointer deref
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YiCTGZ8IVCw0ilKK@linux-uq9g
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.17-2022-03-02:
amdgpu:
- Suspend regression fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303045035.5650-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix GuC SLPC unset command. (Vinay Belgaumkar)
- Fix misidentification of some Apple MacBook Pro laptops as Jasper Lake. (Ville Syrjälä)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YiCXHiTyCE7TbopG@tursulin-mobl2
|
|
This patch adds a new key definition for KEY_ALL_APPLICATIONS
and aliases KEY_DASHBOARD to it.
It also maps the 0x0c/0x2a2 usage code to KEY_ALL_APPLICATIONS.
Signed-off-by: William Mahon <wmahon@chromium.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220303035618.1.I3a7746ad05d270161a18334ae06e3b6db1a1d339@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Numerous keyboards are adding dictate keys which allows for text
messages to be dictated by a microphone.
This patch adds a new key definition KEY_DICTATE and maps 0x0c/0x0d8
usage code to this new keycode. Additionally hid-debug is adjusted to
recognize this new usage code as well.
Signed-off-by: William Mahon <wmahon@chromium.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220303021501.1.I5dbf50eb1a7a6734ee727bda4a8573358c6d3ec0@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
ghes_init() sticks out in acpi_init() because it is the only functions
without an "acpi_" prefix.
Rename ghes_init with an "acpi_" prefix, then all looks fine.
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
From commit e147133a42cb ("ACPI / APEI: Make hest.c manage the estatus
memory pool") was merged, ghes_init() relies on acpi_hest_init() to manage
the estatus memory pool. On the other hand, ghes_init() relies on
sdei_init() to detect the SDEI version and (un)register events. The
dependencies are as follows:
ghes_init() => acpi_hest_init() => acpi_bus_init() => acpi_init()
ghes_init() => sdei_init()
HEST is not PCI-specific and initcall ordering is implicit and not
well-defined within a level.
Based on above, remove acpi_hest_init() from acpi_pci_root_init() and
convert ghes_init() and sdei_init() from initcalls to explicit calls in the
following order:
acpi_hest_init()
ghes_init()
sdei_init()
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When `osc_pc_lpi_support_confirmed` is set through `_OSC` and `_LPI` is
populated then the cpuidle driver assumes that LPI is fully functional.
However currently the kernel only provides architectural support for LPI
on ARM. This leads to high power consumption on X86 platforms that
otherwise try to enable LPI.
So probe whether or not LPI support is implemented before enabling LPI in
the kernel. This is done by overloading `acpi_processor_ffh_lpi_probe` to
check whether it returns `-EOPNOTSUPP`. It also means that all future
implementations of `acpi_processor_ffh_lpi_probe` will need to follow
these semantics as well.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can, xfrm, wifi, bluetooth, and netfilter.
Lots of various size fixes, the length of the tag speaks for itself.
Most of the 5.17-relevant stuff comes from xfrm, wifi and bt trees
which had been lagging as you pointed out previously. But there's also
a larger than we'd like portion of fixes for bugs from previous
releases.
Three more fixes still under discussion, including and xfrm revert for
uAPI error.
Current release - regressions:
- iwlwifi: don't advertise TWT support, prevent FW crash
- xfrm: fix the if_id check in changelink
- xen/netfront: destroy queues before real_num_tx_queues is zeroed
- bluetooth: fix not checking MGMT cmd pending queue, make scanning
work again
Current release - new code bugs:
- mptcp: make SIOCOUTQ accurate for fallback socket
- bluetooth: access skb->len after null check
- bluetooth: hci_sync: fix not using conn_timeout
- smc: fix cleanup when register ULP fails
- dsa: restore error path of dsa_tree_change_tag_proto
- iwlwifi: fix build error for IWLMEI
- iwlwifi: mvm: propagate error from request_ownership to the user
Previous releases - regressions:
- xfrm: fix pMTU regression when reported pMTU is too small
- xfrm: fix TCP MSS calculation when pMTU is close to 1280
- bluetooth: fix bt_skb_sendmmsg not allocating partial chunks
- ipv6: ensure we call ipv6_mc_down() at most once, prevent leaks
- ipv6: prevent leaks in igmp6 when input queues get full
- fix up skbs delta_truesize in UDP GRO frag_list
- eth: e1000e: fix possible HW unit hang after an s0ix exit
- eth: e1000e: correct NVM checksum verification flow
- ptp: ocp: fix large time adjustments
Previous releases - always broken:
- tcp: make tcp_read_sock() more robust in presence of urgent data
- xfrm: distinguishing SAs and SPs by if_id in xfrm_migrate
- xfrm: fix xfrm_migrate issues when address family changes
- dcb: flush lingering app table entries for unregistered devices
- smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error
- mac80211: fix EAPoL rekey fail in 802.3 rx path
- mac80211: fix forwarded mesh frames AC & queue selection
- netfilter: nf_queue: fix socket access races and bugs
- batman-adv: fix ToCToU iflink problems and check the result belongs
to the expected net namespace
- can: gs_usb, etas_es58x: fix opened_channel_cnt's accounting
- can: rcar_canfd: register the CAN device when fully ready
- eth: igb, igc: phy: drop premature return leaking HW semaphore
- eth: ixgbe: xsk: change !netif_carrier_ok() handling in
ixgbe_xmit_zc(), prevent live lock when link goes down
- eth: stmmac: only enable DMA interrupts when ready
- eth: sparx5: move vlan checks before any changes are made
- eth: iavf: fix races around init, removal, resets and vlan ops
- ibmvnic: more reset flow fixes
Misc:
- eth: fix return value of __setup handlers"
* tag 'net-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
ipv6: fix skb drops in igmp6_event_query() and igmp6_event_report()
net: dsa: make dsa_tree_change_tag_proto actually unwind the tag proto change
ixgbe: xsk: change !netif_carrier_ok() handling in ixgbe_xmit_zc()
selftests: mlxsw: resource_scale: Fix return value
selftests: mlxsw: tc_police_scale: Make test more robust
net: dcb: disable softirqs in dcbnl_flush_dev()
bnx2: Fix an error message
sfc: extend the locking on mcdi->seqno
net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error cause by server
net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error generated by client
net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe()
tcp: make tcp_read_sock() more robust
bpf, sockmap: Do not ignore orig_len parameter
net: ipa: add an interconnect dependency
net: fix up skbs delta_truesize in UDP GRO frag_list
iwlwifi: mvm: return value for request_ownership
nl80211: Update bss channel on channel switch for P2P_CLIENT
iwlwifi: fix build error for IWLMEI
ptp: ocp: Add ptp_ocp_adjtime_coarse for large adjustments
batman-adv: Don't expect inter-netns unique iflink indices
...
|
|
Pull auxdisplay fixes from Miguel Ojeda:
"A few lcd2s fixes from Andy Shevchenko"
* tag 'auxdisplay-for-linus-v5.17-rc7' of git://github.com/ojeda/linux:
auxdisplay: lcd2s: Use proper API to free the instance of charlcd object
auxdisplay: lcd2s: Fix memory leak in ->remove()
auxdisplay: lcd2s: Fix lcd2s_redefine_char() feature
|
|
Commit c685c69fba71 ("ixgbe: don't do any AF_XDP zero-copy transmit if
netif is not OK") addressed the ring transient state when
MEM_TYPE_XSK_BUFF_POOL was being configured which in turn caused the
interface to through down/up. Maurice reported that when carrier is not
ok and xsk_pool is present on ring pair, ksoftirqd will consume 100% CPU
cycles due to the constant NAPI rescheduling as ixgbe_poll() states that
there is still some work to be done.
To fix this, do not set work_done to false for a !netif_carrier_ok().
Fixes: c685c69fba71 ("ixgbe: don't do any AF_XDP zero-copy transmit if netif is not OK")
Reported-by: Maurice Baijens <maurice.baijens@ellips.com>
Tested-by: Maurice Baijens <maurice.baijens@ellips.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for Texas Instruments TMP464 and TMP468 temperature sensor
ICs.
TI's TMP464 is an I2C temperature sensor chip. This chip is similar
to TI's TMP421 chip, but with 16bit-wide registers (instead of
8bit-wide registers). The chip has one local sensor and four remote
sensors. TMP468 is similar to TMP464 but has one local and eight
remote sensors.
Originally-from: Agathe Porte <agathe.porte@nokia.com>
Cc: Agathe Porte <agathe.porte@nokia.com>
Cc: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Tested-by: Agathe Porte <agathe.porte@nokia.com>
Link: https://lore.kernel.org/r/20220222223610.23098-2-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Fix an error message and report the correct failing function.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
seqno could be read as a stale value outside of the lock. The lock is
already acquired to protect the modification of seqno against a possible
race condition. Place the reading of this value also inside this locking
to protect it against a possible race condition.
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use of_device_get_match_data() to simplify the code.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220303092131.2060044-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
During driver initialization, the pointer of card info, i.e. the
variable 'ci' is required. However, the definition of
'com20020pci_id_table' reveals that this field is empty for some
devices, which will cause null pointer dereference when initializing
these devices.
The following log reveals it:
[ 3.973806] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
[ 3.973819] RIP: 0010:com20020pci_probe+0x18d/0x13e0 [com20020_pci]
[ 3.975181] Call Trace:
[ 3.976208] local_pci_probe+0x13f/0x210
[ 3.977248] pci_device_probe+0x34c/0x6d0
[ 3.977255] ? pci_uevent+0x470/0x470
[ 3.978265] really_probe+0x24c/0x8d0
[ 3.978273] __driver_probe_device+0x1b3/0x280
[ 3.979288] driver_probe_device+0x50/0x370
Fix this by checking whether the 'ci' is a null pointer first.
Fixes: 8c14f9c70327 ("ARCNET: add com20020 PCI IDs with metadata")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to function, the IPA driver very clearly requires the
interconnect framework to be enabled in the kernel configuration.
State that dependency in the Kconfig file.
This became a problem when CONFIG_COMPILE_TEST support was added.
Non-Qualcomm platforms won't necessarily enable CONFIG_INTERCONNECT.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 38a4066f593c5 ("net: ipa: support COMPILE_TEST")
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220301113440.257916-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Regression has been reported that suspend/resume may hang with
the previous vm ready check commit.
So bring back the evicted list check as a temp fix.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1922
Fixes: c1a66c3bc425 ("drm/amdgpu: check vm ready by amdgpu_vm->evicting flag")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Qiang Yu <qiang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
While it might work, the current approach is fragile in a few ways:
- whenever members in the structure are shuffled, the pointer will be wrong
- the resource freeing may include more than covered by kfree()
Fix this by using charlcd_free() call instead of kfree().
Fixes: 8c9108d014c5 ("auxdisplay: add a driver for lcd2s character display")
Cc: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Once allocated the struct lcd2s_data is never freed.
Fix the memory leak by switching to devm_kzalloc().
Fixes: 8c9108d014c5 ("auxdisplay: add a driver for lcd2s character display")
Cc: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
It seems that the lcd2s_redefine_char() has never been properly
tested. The buffer is filled by DEF_CUSTOM_CHAR command followed
by the character number (from 0 to 7), but immediately after that
these bytes are rewritten by the decoded hex stream.
Fix the index to fill the buffer after the command and number.
Fixes: 8c9108d014c5 ("auxdisplay: add a driver for lcd2s character display")
Cc: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
[fixed typo in commit message]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add the missing unlock before return from error path.
Fixes: 4363f3d3ce8f ("crypto: octeontx2 - add synchronization between mailbox accesses")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix following coccicheck warning:
./drivers/char/hw_random/cavium-rng-vf.c:182:17-20: ERROR:
pdev is NULL but dereferenced.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
While in this particular case it would not be a (critical) issue,
the pattern itself is bad and error prone in case the location
of the parameter is changed.
Don't cast parameter to unsigned long pointer in the bit operations.
Instead copy to a local variable on stack of a proper type and use.
Fixes: cf718eaa8f9b ("crypto: cavium/nitrox - Enabled Mailbox support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
vmx-crypto module depends on CRYPTO_AES, CRYPTO_CBC, CRYPTO_CTR or
CRYPTO_XTS, thus add them.
These dependencies are likely to be enabled, but if
CRYPTO_DEV_VMX=y && !CRYPTO_MANAGER_DISABLE_TESTS
and either of CRYPTO_AES, CRYPTO_CBC, CRYPTO_CTR or CRYPTO_XTS is built
as module or disabled, alg_test() from crypto/testmgr.c complains during
boot about failing to allocate the generic fallback implementations
(2 == ENOENT):
[ 0.540953] Failed to allocate xts(aes) fallback: -2
[ 0.541014] alg: skcipher: failed to allocate transform for p8_aes_xts: -2
[ 0.541120] alg: self-tests for p8_aes_xts (xts(aes)) failed (rc=-2)
[ 0.544440] Failed to allocate ctr(aes) fallback: -2
[ 0.544497] alg: skcipher: failed to allocate transform for p8_aes_ctr: -2
[ 0.544603] alg: self-tests for p8_aes_ctr (ctr(aes)) failed (rc=-2)
[ 0.547992] Failed to allocate cbc(aes) fallback: -2
[ 0.548052] alg: skcipher: failed to allocate transform for p8_aes_cbc: -2
[ 0.548156] alg: self-tests for p8_aes_cbc (cbc(aes)) failed (rc=-2)
[ 0.550745] Failed to allocate transformation for 'aes': -2
[ 0.550801] alg: cipher: Failed to load transform for p8_aes: -2
[ 0.550892] alg: self-tests for p8_aes (aes) failed (rc=-2)
Fixes: c07f5d3da643 ("crypto: vmx - Adding support for XTS")
Fixes: d2e3ae6f3aba ("crypto: vmx - Enabling VMX module for PPC64")
Suggested-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds SHA3 driver support for the Xilinx ZynqMP SoC.
Xilinx ZynqMP SoC has SHA3 engine used for secure hash calculation.
The flow is
SHA3 request from Userspace -> SHA3 driver-> ZynqMp driver-> Firmware ->
SHA3 HW Engine
SHA3 HW engine in Xilinx ZynqMP SoC, does not support parallel processing
of 2 hash requests.
Therefore, software fallback is being used for init, update, final,
export and import in the ZynqMP SHA driver
For digest, the calculation of SHA3 hash is done by the hardened
SHA3 accelerator in Xilinx ZynqMP SoC.
Signed-off-by: Harsha <harsha.harsha@xilinx.com>
Signed-off-by: Kalyani Akula <kalyani.akula@xilinx.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds zynqmp_pm_sha_hash API in the ZynqMP firmware to compute
SHA3 hash of given data.
Signed-off-by: Harsha <harsha.harsha@xilinx.com>
Signed-off-by: Kalyani Akula <kalyani.akula@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch updates the Makefile for xilinx subdirectory.
CONFIG_CRYPTO_DEV_ZYNQMP_AES protects zynqmp-aes-gcm.o and it is used
twice (in drivers/crypto/Makefile and drivers/crypto/xilinx/Makefile)
and it is enough to use it once.
Signed-off-by: Harsha <harsha.harsha@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Doing ipsec produces a spinlock recursion warning.
This is due to not disabling BH during crypto completion function.
Fixes: 46c5338db7bd45b2 ("crypto: sl3516 - Add sl3516 crypto engine")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Doing ipsec produces a spinlock recursion warning.
This is due to not disabling BH during crypto completion function.
Fixes: 48fe583fe541 ("crypto: amlogic - Add crypto accelerator for amlogic GXL")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Doing ipsec produces a spinlock recursion warning.
This is due to not disabling BH during crypto completion function.
Fixes: 06f751b61329 ("crypto: allwinner - Add sun8i-ce Crypto Engine")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Doing ipsec produces a spinlock recursion warning.
This is due to not disabling BH during crypto completion function.
Fixes: f08fcced6d00 ("crypto: allwinner - Add sun8i-ss cryptographic offloader")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
On my renesas salavator-X, I saw some cavium driver failing crypto
self-tests.
But salvator does not have such hardware.
This is due to cavium/zip driver registering algorithms even if hardware
is not present.
The solution is to move algorithm registration in the probe function.
This permits also to simplify module init/exit by using
module_pci_driver.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove extra line.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add runtime PM support.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use __maybe_unused and pm_ptr() for pm ops.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
