| Age | Commit message (Collapse) | Author |
|---|
|
DEFINE_RES_IRQ returns struct resource type, so it is
unnecessary to cast it to struct resource.
Remove the unnecessary cast to fix the following sparse warnings:
drivers/acpi/arm64/gtdt.c:355:19: sparse: warning: cast to non-scalar
drivers/acpi/arm64/gtdt.c:355:19: sparse: warning: cast from non-scalar
No functional changes intended.
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240917233827.73167-1-minhuadotchen@gmail.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The format specifier of "unsigned int" in pr_info()
should be "%u", not "%d".
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Acked-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The i2c-ocores controller can run in interrupt mode on tqmx86 modules.
Add a module parameter to allow configuring the IRQ number, similar to the
handling of the GPIO IRQ.
The new code and module parameter refer to the I2C controller as "I2C1",
as the TQMx86 PLD actually contains a second I2C controller, for which
driver support will be added in the future.
Signed-off-by: Gregor Herburger <gregor.herburger@tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/c1b0769e00a8a4e463cffe725e939b0e5c2992c8.1731325758.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
GPIO IRQ setup can fail either because an invalid IRQ was passed as a
parameter, or because the GPIO controller does not support interrupts.
Neither is severe enough to stop the whole probe; simply disable IRQ
support in the GPIO resource when setup fails.
The code is made a bit more robust by introduing an enum for the
resource list indices instead of assuming that the IRQ is at index 0.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/2b5522362098d54c6203be6da95bbc545a21fd49.1731325758.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Move IRQ setup into a helper function. The string "GPIO" for error
messages is replaced with a label argument to prepare for reusing the
function for the I2C IRQ.
No functional change intended.
Co-developed-by: Gregor Herburger <gregor.herburger@tq-group.com>
Signed-off-by: Gregor Herburger <gregor.herburger@tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/97f481334f480a113b7076e76f994e0e73ee5aa5.1731325758.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Clarify that "7, 9, 12" refers to the valid arguments that can be
passed as gpio_irq.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/3275f436b66f6807c02256bc852d39b03ebd64d5.1731325758.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
This adds support for 3 new TQMx86 COMs:
- TQMx120UC/TQMx130UC: COM Express Compact Type 6 modules with 12th and
13th Generation Intel Core CPUs ([1, 2])
- TQMxE41S: SMARC 2.1 module with Intel Atom x7000E and compatible CPUs [3]
[1] https://www.tq-group.com/en/products/tq-embedded/x86-architecture/tqmx120uc/
[2] https://www.tq-group.com/en/products/tq-embedded/x86-architecture/tqmx130uc/
[3] https://www.tq-group.com/en/products/tq-embedded/x86-architecture/tqmxe41s/
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/90ddebda96d29246992b58ae0231a511f6424211.1731325758.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add a MFD cell for the chip's Real-Time Clock (RTC).
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Link: https://lore.kernel.org/r/20241012193345.18594-1-balejk@matfyz.cz
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The format specifier of "signed int" in sprintf() should be "%d", not
"%u".
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241111065809.3814-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
This is the third amlogic driver. The RTC hardware of A4 SoC is different
from the previous one. This RTC hardware includes a timing function and
an alarm function. But the existing has only timing function, alarm
function is using the system clock to implement a virtual alarm. Add
the RTC driver to support it.
Signed-off-by: Yiting Deng <yiting.deng@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20241112-rtc-v6-2-a71b60d2f354@amlogic.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Since "res" will never be null, just delete this check.
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Link: https://patch.msgid.link/20241112081637.40962-1-zhangjiao2@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/regulator to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
A few whitespace changes are done en passant to make indention
consistent.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/ab85510f83fa901e44d5d563fe6e768054229bfe.1731398433.git.u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Get rid of sparse warnings:
CHECK drivers/s390/char/con3270.c
drivers/s390/char/con3270.c:531:15: warning: Using plain integer as NULL pointer
drivers/s390/char/con3270.c:749:15: warning: Using plain integer as NULL pointer
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Support the next version GPIO controller on SoCs like rk3576.
Signed-off-by: Ye Zhang <ye.zhang@rock-chips.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20241112015408.3139996-4-ye.zhang@rock-chips.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Have a list of valid IDs and default to -ENODEV.
Signed-off-by: Ye Zhang <ye.zhang@rock-chips.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241112015408.3139996-3-ye.zhang@rock-chips.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Remove redundant comments and provide a detailed explanation of the
GPIO version ID.
Signed-off-by: Ye Zhang <ye.zhang@rock-chips.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20241112015408.3139996-2-ye.zhang@rock-chips.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
On some x86 Bay Trail tablets which shipped with Android as factory OS,
the DSDT is so broken that the PMIC needs to be manually instantiated by
the special x86-android-tablets.ko "fixup" driver for cases like this.
Add an i2c_device_id table so that the driver can match on manually
instantiated i2c_client-s (which lack an ACPI fwnode to match on).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241104150655.41402-3-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Currently the intel_soc_pmic_bxtwc, intel_soc_pmic_chtwc and
intel_soc_pmic_crc PMIC drivers use more or less free form strings
for their driver name.
Where as intel_soc_pmic_chtdc_ti and intel_soc_pmic_mrfld use the driver's
filename as driver name.
Update the 3 others to also use the driver's filename to make the naming
consistent.
Suggested-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241104150655.41402-2-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
When probing if default LED state is on then default brightness will be
applied instead of max brightness.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Link: https://lore.kernel.org/r/20241105185006.1380166-3-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Replace the parameter name 'con' with 'con_handle' in the docstring of
__fw_devlink_relax_cycles() to resolve the kernel-doc warning about an
excess parameter description.
Address the following warning:
./drivers/base/core.c:1994: warning: Excess function parameter 'con' description in '__fw_devlink_relax_cycles'
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20241107223528.3781323e@canb.auug.org.au/
Signed-off-by: Amit Vadhavana <av2082000@gmail.com>
Link: https://lore.kernel.org/r/20241111165253.16672-1-av2082000@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
class_(for_each|find)_device()
For both API class_for_each_device(const struct class *class, ...) and
class_find_device(const struct class *class, ...), their WARN() messages
prompt @class was not initialized when suffer class_to_subsys(@class)
error, but the error actually means @class was not registered, so these
warning messages are not accurate.
Fix by replacing term initialized with registered within these messages.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241105-class_fix-v1-2-80866f9994a5@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The F81216E is a LPC/eSPI to 4 UART Super I/O and is mostly compatible with
the F81216H, but does not support RS-485 auto-direction delays on any port.
Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20241110111703.15494-1-fbrozovic@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a typo in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20241112084507.452776-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/firmware to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/36974feb6035201d53384557259ec72fe311053b.1731397962.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The format specifier of "unsigned long int" in sprintf() should be "%lu", not
"%ld".
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241111091950.4299-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The "command" variable can be controlled by the user via debugfs. The
worry is that if con_index is zero then "&uc->ucsi->connector[con_index
- 1]" would be an array underflow.
Fixes: 170a6726d0e2 ("usb: typec: ucsi: add support for separate DP altmode devices")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/c69ef0b3-61b0-4dde-98dd-97b97f81d912@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On some Lenovo platforms, the patch works around problems with ov2740
sensor initialization, which manifest themself like below:
[ 4.540476] ov2740 i2c-INT3474:01: error -EIO: failed to find sensor
[ 4.542066] ov2740 i2c-INT3474:01: probe with driver ov2740 failed with error -5
or
[ 7.742633] ov2740 i2c-INT3474:01: chip id mismatch: 2740 != 0
[ 7.742638] ov2740 i2c-INT3474:01: error -ENXIO: failed to find sensor
and also by random failures of video stream start.
Issue can be reproduced by this script:
n=0
k=0
while [ $n -lt 50 ] ; do
sudo modprobe -r ov2740
sleep `expr $RANDOM % 5`
sudo modprobe ov2740
if media-ctl -p | grep -q ov2740 ; then
let k++
fi
let n++
done
echo Success rate $k/$n
Without the patch, success rate is approximately 15 or 50 tries.
With the patch it does not fail.
This problem is some hardware or firmware malfunction, that can not be
easy debug and fix. While setting small autosuspend delay is not perfect
workaround as user can configure it to any value, it will prevent
the failures by default.
Additionally setting small autosuspend delay should have positive effect
on power consumption as for most ljca workloads device is used for just
a few milliseconds flowed by long periods of at least 100ms of inactivity
(usually more).
Fixes: acd6199f195d ("usb: Add support for Intel LJCA device")
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com> # ThinkPad X1 Yoga Gen 8, ov2740
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://lore.kernel.org/r/20241112075514.680712-2-stanislaw.gruszka@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Do not mark interface as ready to suspend when we are still waiting
for response messages from the device.
Fixes: acd6199f195d ("usb: Add support for Intel LJCA device")
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com> # ThinkPad X1 Yoga Gen 8, ov2740
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://lore.kernel.org/r/20241112075514.680712-1-stanislaw.gruszka@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The dtbinding have imx7ulp and imx8ulp compatible with imx7d before. And
then the dtb follow the dtbinding. However, the driver doesn't add imx8ulp
compatible now. To make imx8ulp work well, this will add support for it.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20241111090916.1534047-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The GET_CAPABILITY size is wrong. The definitions for the
command sizes are for bitfieds and therefore in bits, not
bytes.
This fixes an issue that prevents the interface from being
registered with UCSI versions older than 2.0 because the
command size exceeds the MESSAGE_IN field size.
Fixes: 226ff2e681d0 ("usb: typec: ucsi: Convert connector specific commands to bitmaps")
Reported-by: Abel Vesa <abel.vesa@linaro.org>
Closes: https://lore.kernel.org/linux-usb/Zy864W7sysWZbCTd@linaro.org/
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241111100220.1743872-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a possibility that a request's callback could be invoked from
usb_ep_queue() (call trace below, supplemented with missing calls):
req->complete from usb_gadget_giveback_request
(drivers/usb/gadget/udc/core.c:999)
usb_gadget_giveback_request from musb_g_giveback
(drivers/usb/musb/musb_gadget.c:147)
musb_g_giveback from rxstate
(drivers/usb/musb/musb_gadget.c:784)
rxstate from musb_ep_restart
(drivers/usb/musb/musb_gadget.c:1169)
musb_ep_restart from musb_ep_restart_resume_work
(drivers/usb/musb/musb_gadget.c:1176)
musb_ep_restart_resume_work from musb_queue_resume_work
(drivers/usb/musb/musb_core.c:2279)
musb_queue_resume_work from musb_gadget_queue
(drivers/usb/musb/musb_gadget.c:1241)
musb_gadget_queue from usb_ep_queue
(drivers/usb/gadget/udc/core.c:300)
According to the docstring of usb_ep_queue(), this should not happen:
"Note that @req's ->complete() callback must never be called from within
usb_ep_queue() as that can create deadlock situations."
In fact, a hardware lockup might occur in the following sequence:
1. The gadget is initialized using musb_gadget_enable().
2. Meanwhile, a packet arrives, and the RXPKTRDY flag is set, raising an
interrupt.
3. If IRQs are enabled, the interrupt is handled, but musb_g_rx() finds an
empty queue (next_request() returns NULL). The interrupt flag has
already been cleared by the glue layer handler, but the RXPKTRDY flag
remains set.
4. The first request is enqueued using usb_ep_queue(), leading to the call
of req->complete(), as shown in the call trace above.
5. If the callback enables IRQs and another packet is waiting, step (3)
repeats. The request queue is empty because usb_g_giveback() removes the
request before invoking the callback.
6. The endpoint remains locked up, as the interrupt triggered by hardware
setting the RXPKTRDY flag has been handled, but the flag itself remains
set.
For this scenario to occur, it is only necessary for IRQs to be enabled at
some point during the complete callback. This happens with the USB Ethernet
gadget, whose rx_complete() callback calls netif_rx(). If called in the
task context, netif_rx() disables the bottom halves (BHs). When the BHs are
re-enabled, IRQs are also enabled to allow soft IRQs to be processed. The
gadget itself is initialized at module load (or at boot if built-in), but
the first request is enqueued when the network interface is brought up,
triggering rx_complete() in the task context via ioctl(). If a packet
arrives while the interface is down, it can prevent the interface from
receiving any further packets from the USB host.
The situation is quite complicated with many parties involved. This
particular issue can be resolved in several possible ways:
1. Ensure that callbacks never enable IRQs. This would be difficult to
enforce, as discovering how netif_rx() interacts with interrupts was
already quite challenging and u_ether is not the only function driver.
Similar "bugs" could be hidden in other drivers as well.
2. Disable MUSB interrupts in musb_g_giveback() before calling the callback
and re-enable them afterwars (by calling musb_{dis,en}able_interrupts(),
for example). This would ensure that MUSB interrupts are not handled
during the callback, even if IRQs are enabled. In fact, it would allow
IRQs to be enabled when releasing the lock. However, this feels like an
inelegant hack.
3. Modify the interrupt handler to clear the RXPKTRDY flag if the request
queue is empty. While this approach also feels like a hack, it wastes
CPU time by attempting to handle incoming packets when the software is
not ready to process them.
4. Flush the Rx FIFO instead of calling rxstate() in musb_ep_restart().
This ensures that the hardware can receive packets when there is at
least one request in the queue. Once IRQs are enabled, the interrupt
handler will be able to correctly process the next incoming packet
(eventually calling rxstate()). This approach may cause one or two
packets to be dropped (two if double buffering is enabled), but this
seems to be a minor issue, as packet loss can occur when the software is
not yet ready to process them. Additionally, this solution makes the
gadget driver compliant with the rule mentioned in the docstring of
usb_ep_queue().
There may be additional solutions, but from these four, the last one has
been chosen as it seems to be the most appropriate, as it addresses the
"bad" behavior of the driver.
Fixes: baebdf48c360 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
Cc: stable@vger.kernel.org
Signed-off-by: Hubert Wiśniewski <hubert.wisniewski.25632@gmail.com>
Link: https://lore.kernel.org/r/4ee1ead4525f78fb5909a8cbf99513ad0082ad21.camel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Volume buttons on Lenovo Thinkpad X12 Detachable Tablet Gen 1 did not
send any input events when pressed. When loading intel-hid with the 5
Button Array explicitly enabled, the buttons functioned normally.
Adds the X12 Detachable Tablet Gen 1 to the `button_array_table`.
However, the driver is unable to call INTEL_HID_DSM_BTNE_FN and prints
the warning "failed to set button capability" when attempting to enable
or disable the 5 Button Array. The warning should be harmless and
adding more special handling to avoid it is not worth it.
Co-developed-by: Mary Strodl <mstrodl@csh.rit.edu>
Signed-off-by: Mary Strodl <mstrodl@csh.rit.edu>
Signed-off-by: Cole Stowell <cole@stowell.pro>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241107205908.69279-1-cole@stowell.pro
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v6.13 merge window
This includes following USB4/Thunderbolt changes for the v6.13 merge
window:
- Add Gen 4 receiver lane margining support.
- Replace usage of deprecated PCI functions.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.13-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Replace deprecated PCI functions
thunderbolt: debugfs: Implement asymmetric lane margining
thunderbolt: debugfs: Don't hardcode margining results size
thunderbolt: debugfs: Refactor hardware margining result parsing
thunderbolt: debugfs: Replace margining lane numbers with an enum
thunderbolt: debugfs: Replace "both lanes" with "all lanes"
thunderbolt: debugfs: Implement Gen 4 margining eye selection
thunderbolt: debugfs: Add USB4 Gen 4 margining capabilities
thunderbolt: Don't hardcode margining capabilities size
|
|
Replace throttle_thermal_policy_switch_next() with
platform_profile_cycle() to reduce code duplication and avoid a
potential race condition with the platform profile handler.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241107003811.615574-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
When changing the thermal policy using the platform profile API,
a Vivobook thermal policy is stored in throttle_thermal_policy_mode.
However everywhere else a normal thermal policy is stored inside this
variable, potentially confusing the platform profile.
Fix this by always storing normal thermal policy values inside
throttle_thermal_policy_mode and only do the conversion when writing
the thermal policy to hardware. This also fixes the order in which
throttle_thermal_policy_switch_next() steps through the thermal modes
on Vivobook machines.
Tested-by: Casey G Bowman <casey.g.bowman@intel.com>
Fixes: bcbfcebda2cb ("platform/x86: asus-wmi: add support for vivobook fan profiles")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241107003811.615574-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The if statement performs the same action if the strcmp result is
true or false since there is identical code on both branches. The
if statement is redundant and can be replaced with just one call
to sysfs_remove_group.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241107113543.17137-1-colin.i.king@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
It was found that unloading 'hid_hyperv' module results in a devres
complaint:
...
hv_vmbus: unregistering driver hid_hyperv
------------[ cut here ]------------
WARNING: CPU: 2 PID: 3983 at drivers/base/devres.c:691 devres_release_group+0x1f2/0x2c0
...
Call Trace:
<TASK>
? devres_release_group+0x1f2/0x2c0
? __warn+0xd1/0x1c0
? devres_release_group+0x1f2/0x2c0
? report_bug+0x32a/0x3c0
? handle_bug+0x53/0xa0
? exc_invalid_op+0x18/0x50
? asm_exc_invalid_op+0x1a/0x20
? devres_release_group+0x1f2/0x2c0
? devres_release_group+0x90/0x2c0
? rcu_is_watching+0x15/0xb0
? __pfx_devres_release_group+0x10/0x10
hid_device_remove+0xf5/0x220
device_release_driver_internal+0x371/0x540
? klist_put+0xf3/0x170
bus_remove_device+0x1f1/0x3f0
device_del+0x33f/0x8c0
? __pfx_device_del+0x10/0x10
? cleanup_srcu_struct+0x337/0x500
hid_destroy_device+0xc8/0x130
mousevsc_remove+0xd2/0x1d0 [hid_hyperv]
device_release_driver_internal+0x371/0x540
driver_detach+0xc5/0x180
bus_remove_driver+0x11e/0x2a0
? __mutex_unlock_slowpath+0x160/0x5e0
vmbus_driver_unregister+0x62/0x2b0 [hv_vmbus]
...
And the issue seems to be that the corresponding devres group is not
allocated. Normally, devres_open_group() is called from
__hid_device_probe() but Hyper-V HID driver overrides 'hid_dev->driver'
with 'mousevsc_hid_driver' stub and basically re-implements
__hid_device_probe() by calling hid_parse() and hid_hw_start() but not
devres_open_group(). hid_device_probe() does not call __hid_device_probe()
for it. Later, when the driver is removed, hid_device_remove() calls
devres_release_group() as it doesn't check whether hdev->driver was
initially overridden or not.
The issue seems to be related to the commit 62c68e7cee33 ("HID: ensure
timely release of driver-allocated resources") but the commit itself seems
to be correct.
Fix the issue by dropping the 'hid_dev->driver' override and using
hid_register_driver()/hid_unregister_driver() instead. Alternatively, it
would have been possible to rely on the default handling but
HID_CONNECT_DEFAULT implies HID_CONNECT_HIDRAW and it doesn't seem to work
for mousevsc as-is.
Fixes: 62c68e7cee33 ("HID: ensure timely release of driver-allocated resources")
Suggested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Grab the intel_display from 'encoder' rather than 'state'
in the encoder hooks to avoid the massive footgun that is
intel_sanitize_encoder(), which passes NULL as the 'state'
argument to encoder .disable() and .post_disable().
TODO: figure out how to actually fix intel_sanitize_encoder()...
Fixes: ab0b0eb5c85c ("drm/i915/tv: convert to struct intel_display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241107161123.16269-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit dc3806d9eb66d0105f8d55d462d4ef681d9eac59)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Use the mem_is_zero() helper where possible.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20241110201706.16614-1-andy.shevchenko@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The default dummy cycle for Macronix SPI NOR flash in Octal Output
Read Mode(1-1-8) is 20.
Currently, the dummy buswidth is set according to the address bus width.
In the 1-1-8 mode, this means the dummy buswidth is 1. When converting
dummy cycles to bytes, this results in 20 x 1 / 8 = 2 bytes, causing the
host to read data 4 cycles too early.
Since the protocol data buswidth is always greater than or equal to the
address buswidth. Setting the dummy buswidth to match the data buswidth
increases the likelihood that the dummy cycle-to-byte conversion will be
divisible, preventing the host from reading data prematurely.
Fixes: 0e30f47232ab ("mtd: spi-nor: add support for DTR protocol")
Cc: stable@vger.kernel.org
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Link: https://lore.kernel.org/r/20241112075242.174010-2-linchengming884@gmail.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
|
|
Enable set_func_resources for P5 and P7 adapters to handle
VF resource distribution. Remove setting max resources per VF
during PF initialization. This change is required for firmwares
which does not support RoCE VF resource management by NIC driver.
The code is same for all adapters now.
Reviewed-by: Stephen Shi <stephen.shi@broadcom.com>
Reviewed-by: Rukhsana Ansari <rukhsana.ansari@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1730882676-24434-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Refine RoCE SRIOV resource configuration design,
using the INITIALIZE_FW's flag as an indication
for the new design to the firmware. RoCE driver does not
have to provision resources to VF when firmware
advertises support for RoCE resource management by NIC driver.
Signed-off-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
CC: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1730882676-24434-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
During driver load, PF RDMA driver provisions resources
to the RDMA VFs. This logic takes into consideration of
the total number of VFs supported on the PF while
allocating resources. Firmware now advertises a capability
where NIC driver can allocate resources for RDMA VFs when
the user actually creates a VF. So this resource
distribution can be based on the number of active VFs.
This patch adds the support to check for the firmware
capability and follow the new RDMA VF resource allocation
strategy. The current logic in the RDMA driver will be
removed for the newer Firmware versions in a subsequent
patch in this series.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1730882676-24434-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
All MTL and ARL SKUs share the same GSC FW, but the newer platforms are
only supported in newer blobs. In particular, ARL-S is supported
starting from 102.0.10.1878 (which is already the minimum required
version for ARL in the code), while ARL-H and ARL-U are supported from
102.1.15.1926. Therefore, the driver needs to check which specific ARL
subplatform its running on when verifying that the GSC FW is new enough
for it.
Fixes: 2955ae8186c8 ("drm/i915: ARL requires a newer GSC firmware")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028233132.149745-1-daniele.ceraolospurio@intel.com
(cherry picked from commit 3c1d5ced18db8a67251c8436cf9bdc061f972bdb)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The struct device_link *link field in struct qcom_ice is only used to
store the result of a device_link_add call with the
DL_FLAG_AUTOREMOVE_SUPPLIER flag. With this flag, the resulting value
can only be used to check whether the link is present or not, as per the
device_link_add description, hence this commit removes the field.
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20241030025046.303342-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The newly added driver causes a warnings when enabling -Wunused-const-variables:
drivers/clk/qcom/gcc-ipq5424.c:1064:30: error: 'ftbl_gcc_q6_axi_clk_src' defined but not used [-Werror=unused-const-variable=]
1064 | static const struct freq_tbl ftbl_gcc_q6_axi_clk_src[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~
drivers/clk/qcom/gcc-ipq5424.c:957:30: error: 'ftbl_gcc_qpic_clk_src' defined but not used [-Werror=unused-const-variable=]
957 | static const struct freq_tbl ftbl_gcc_qpic_clk_src[] = {
| ^~~~~~~~~~~~~~~~~~~~~
drivers/clk/qcom/gcc-ipq5424.c:497:30: error: 'ftbl_gcc_qupv3_2x_core_clk_src' defined but not used [-Werror=unused-const-variable=]
497 | static const struct freq_tbl ftbl_gcc_qupv3_2x_core_clk_src[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In order to hopefully enable this warning by default in the future,
remove the data for now. If it gets used in the future, it can
trivially get added back.
Fixes: 21b5d5a4a311 ("clk: qcom: add Global Clock controller (GCC) driver for IPQ5424 SoC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241111103258.3336183-1-arnd@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The current loop code was based on the assumption
that there can be page leftovers from previous function calls.
This patch changes the allocation loop to make it clearer how
pages get allocated every MLX5E_SHAMPO_WQ_HEADER_PER_PAGE headers.
This change has no functional implications.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107194357.683732-13-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The info array is used to store a pointer to the
dma address of the header and to the frag page. However,
this array is not really required:
- The frag page can be calculated from the header index
frag page index = header index / headers per page.
- The dma address can be calculated through a formula:
dma page address + header offset.
This series gets rid of the info array and uses the above
formulas instead.
The current_page_index was used in conjunction with the info array to
store page fragment indices. This variable is dropped as well.
There was no performance regression observed.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107194357.683732-12-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the UMR allocation has been simplified, it is no longer
possible to have a leftover page from a previous call to
mlx5e_build_shampo_hd_umr().
This patch simplifies the code by switching the order of operations:
first take the frag page and then increment the index. This is more
straightforward and it also paves the way for dropping the info
array.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107194357.683732-11-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When calculating the index for the next frag page slot, the divisor is
incorrect: it should be the number of pages per queue not the number of
headers per queue. This is currently harmless because frag pages are not
used directly, but they are intermediated through the info array. But it
needs to be fixed as an upcoming patch will get rid of the info array.
This patch introduces a new pages per queue variable and plugs it in the
formula.
Now that this variable exists, additional code can be simplified in the
SHAMPO initialization code.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107194357.683732-10-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
