| Age | Commit message (Collapse) | Author |
|---|
|
This patch replaces min(a, max(b, c)) by clamp(val, lo, hi) in the SRP
transport layer. The clamp() macro explicitly expresses the intent of
constraining a value within bounds, improving code readability.
Signed-off-by: Li Haoran <li.haoran7@zte.com.cn>
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Link: https://lore.kernel.org/r/202503311555115618U8Md16mKpRYOIy2TOmB6@zte.com.cn
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The ufs device JEDEC specification version 4.1 adds support for the
device level exception events. To support this new device level
exception feature, expose two new sysfs nodes below to provide the user
space access to the device level exception information.
/sys/bus/platform/drivers/ufshcd/*/device_lvl_exception_count
/sys/bus/platform/drivers/ufshcd/*/device_lvl_exception_id
The device_lvl_exception_count sysfs node reports the number of device
level exceptions that have occurred since the last time this variable is
reset. Writing a value of 0 will reset it. The device_lvl_exception_id
reports the exception ID which is the qDeviceLevelExceptionID attribute
of the device JEDEC specifications version 4.1 and later. The user space
application can query these sysfs nodes to get more information about
the device level exception.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/6278d7c125b2f0cf5056f4a647a4b9c1fdd24fc7.1743198325.git.quic_nguyenb@quicinc.com
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Arthur Simchaev <arthur.simchaev@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The ufshcd_wb_presrv_usrspc_keep_vcc_on() function has deviated from its
original implementation. The "_keep_vcc_on" part of the function name is
misleading. Rename the function to ufshcd_wb_curr_buff_threshold_check()
to improve the readability. Also, updated the comments in the function.
There is no change to the functionality.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/02ae5e133f6ebf23b54d943e6d1d9de2544eb80e.1743192926.git.quic_nguyenb@quicinc.com
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The smartpqi driver checks the reset_devices variable to determine
whether special adjustments need to be made for kdump. This has the
effect that after a regular kexec reboot, some driver parameters such as
max_transfer_size are much lower than usual. More importantly, kexec
reboot tests have revealed memory corruption caused by the driver log
being written to system memory after a kexec.
Fix this by testing is_kdump_kernel() rather than reset_devices where
appropriate.
Fixes: 058311b72f54 ("scsi: smartpqi: Add fw log to kdump")
Signed-off-by: Martin Wilck <mwilck@suse.com>
Link: https://lore.kernel.org/r/20250321223319.109250-1-mwilck@suse.com
Cc: Randy Wright <rwright@hpe.com>
Acked-by: Don Brace <don.brace@microchip.com>
Tested-by: Don Brace <don.brace@microchip.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When a fatal error occurs, a phy down event may not be received to set
phy->phy_attached to zero.
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Link: https://lore.kernel.org/r/20250319230305.3172920-1-salomondush@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Peter Griffin <peter.griffin@linaro.org> says:
Hi folks,
This series fixes several stability issues with the upstream ufs-exynos
driver, specifically for the gs101 SoC found in Pixel 6.
The main fix is regarding the IO cache coherency setting and ensuring
that it is correctly applied depending on if the dma-coherent property
is specified in device tree. This fixes the UFS stability issues on gs101
and I would imagine will also fix issues on exynosauto platform that
seems to have similar iocc shareability bits.
Additionally the phy reference counting is fixed which allows module
load/unload to work reliably and keeps the phy state machine in sync
with the controller glue driver.
regards,
Peter
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-0-96722cc2ba1b@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
GPIO_OUT[0] is connected to the reset pin of embedded UFS device.
Before powering off the phy assert the reset signal.
This is added as a gs101 specific suspend hook so as not to have any
unintended consequences for other SoCs supported by this driver.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-7-96722cc2ba1b@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufshcd_pltfrm_remove() calls ufshcd_remove(hba) which in turn calls
ufshcd_hba_exit().
By moving the phy_power_off() and phy_exit() calls to the newly created
.exit callback they get called by ufshcd_variant_hba_exit() before
ufshcd_hba_exit() turns off the regulators. This is also similar flow to
the ufs-qcom driver.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-6-96722cc2ba1b@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
PRDT_PREFETCH_ENABLE[31] bit should be set when desctype field of
fmpsecurity0 register is type2 (double file encryption) or type3
(support for file and disk encryption). Setting this bit enables PRDT
pre-fetching on both TXPRDT and RXPRDT.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-5-96722cc2ba1b@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufshcd_link_startup() can call ufshcd_vops_link_startup_notify()
multiple times when retrying. This causes the phy reference count to
keep increasing and the phy to not properly re-initialize.
If the phy has already been previously powered on, first issue a
phy_power_off() and phy_exit(), before re-initializing and powering on
again.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-4-96722cc2ba1b@linaro.org
Fixes: 3d73b200f989 ("scsi: ufs: ufs-exynos: Change ufs phy control sequence")
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If dma-coherent property isn't set then descriptors are non-cacheable
and the iocc shareability bits should be disabled. Without this UFS can
end up in an incompatible configuration and suffer from random cache
related stability issues.
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Fixes: cc52e15397cc ("scsi: ufs: ufs-exynos: Support ExynosAuto v9 UFS")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-3-96722cc2ba1b@linaro.org
Cc: Chanho Park <chanho61.park@samsung.com>
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
gs101 I/O coherency shareability bits differ from exynosauto SoC. To
support both SoCs move this info the SoC drvdata.
Currently both the value and mask are the same for both gs101 and
exynosauto, thus we use the same value.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-2-96722cc2ba1b@linaro.org
Fixes: d11e0a318df8 ("scsi: ufs: exynos: Add support for Tensor gs101 SoC")
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Ensure clocks are enabled before configuring unipro. Additionally move
the pre_link() hook before the exynos_ufs_phy_init() calls. This means
the register write sequence more closely resembles the ordering of the
downstream driver.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-1-96722cc2ba1b@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add goto to ensure scsi_host_put() is called in all error paths of
iscsi_set_host_param() function. This fixes a potential memory leak when
strlen() check fails.
Fixes: ce51c8170084 ("scsi: iscsi: Add strlen() check in iscsi_if_set{_host}_param()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20250318094344.91776-1-linmq006@gmail.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In the EIP93 HASH functions, the eip93_put_descriptor is called without
acquiring lock. This is problematic when multiple thread execute hash
operations.
Correctly acquire ring write lock on calling eip93_put_descriptor to
prevent concurrent access and mess with the ring pointers.
Fixes: 9739f5f93b78 ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support")
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.15-2025-03-27:
amdgpu:
- Guard against potential division by 0 in fan code
- Zero RPM support for SMU 14.0.2
- Properly handle SI and CIK support being disabled
- PSR fixes
- DML2 fixes
- DP Link training fix
- Vblank fixes
- RAS fixes
- Partitioning fix
- SDMA fix
- SMU 13.0.x fixes
- Rom fetching fix
- MES fixes
- Queue reset fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250328004749.3392457-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- Fix NULL pointer dereference on error path
- Add missing HW workaround for BMG
- Fix survivability mode not triggering
- Fix build warning when DRM_FBDEV_EMULATION is not set
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/vxy5kwdkzgp2u2umnyxv4ygslmdlvzjl22xotzxaw55dv7plpz@34miqxkbvggu
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 fixes for v6.15 merge window:
- Bounds check for scalers in DSC prefill latency computation
- Fix build by adding a missing include
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/878qota36x.fsf@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Short summary of fixes pull:
adp:
- Fix error handling in plane setup
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250327141835.GA96037@linux.fritz.box
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire update from Takashi Sakamoto:
"A single commit to use the common helper function for on-stack
trailing array to enqueue any isochronous packet by the requests
from userspace applications"
* tag 'firewire-updates-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: avoid -Wflex-array-member-not-at-end warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- dm-crypt: switch to using the crc32 library
- dm-verity, dm-integrity, dm-crypt: documentation improvement
- dm-vdo fixes
- dm-stripe: enable inline crypto passthrough
- dm-integrity: set ti->error on memory allocation failure
- dm-bufio: remove unused return value
- dm-verity: do forward error correction on metadata I/O errors
- dm: fix unconditional IO throttle caused by REQ_PREFLUSH
- dm cache: prevent BUG_ON by blocking retries on failed device resumes
- dm cache: support shrinking the origin device
- dm: restrict dm device size to 2^63-512 bytes
- dm-delay: support zoned devices
- dm-verity: support block number limits for different ioprio classes
- dm-integrity: fix non-constant-time tag verification (security bug)
- dm-verity, dm-ebs: fix prefetch-vs-suspend race
* tag 'for-6.15/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (27 commits)
dm-ebs: fix prefetch-vs-suspend race
dm-verity: fix prefetch-vs-suspend race
dm-integrity: fix non-constant-time tag verification
dm-verity: support block number limits for different ioprio classes
dm-delay: support zoned devices
dm: restrict dm device size to 2^63-512 bytes
dm cache: support shrinking the origin device
dm cache: prevent BUG_ON by blocking retries on failed device resumes
dm vdo indexer: reorder uds_request to reduce padding
dm: fix unconditional IO throttle caused by REQ_PREFLUSH
dm vdo: rework processing of loaded refcount byte arrays
dm vdo: remove remaining ring references
dm-verity: do forward error correction on metadata I/O errors
dm-bufio: remove unused return value
dm-integrity: set ti->error on memory allocation failure
dm: Enable inline crypto passthrough for striped target
dm vdo slab-depot: read refcount blocks in large chunks at load time
dm vdo vio-pool: allow variable-sized metadata vios
dm vdo vio-pool: support pools with multiple data blocks per vio
dm vdo vio-pool: add a pool pointer to pooled_vio
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Ira Weiny:
"Most of the code changes are to remove dead code.
The bug fixes are minor, Syzkaller and one for broken devices which
are unlikely to be in the field. So no need to backport them.
- two patches to remove dead code: nd_attach_ndns() and
nd_region_conflict() have not been used since 2017 and 2019
respectively
- Fix divide-by-0 if device returns a broken LSA value
- Fix Syzkaller reported bug"
* tag 'libnvdimm-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/labels: Fix divide error in nd_label_data_init()
libnvdimm: Remove unused nd_attach_ndns
libnvdimm: Remove unused nd_region_conflict
acpi: nfit: fix narrowing conversion in acpi_nfit_ctl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dave Jiang:
- Add support for Global Persistent Flush (GPF)
- Cleanup of DPA partition metadata handling:
- Remove the CXL_DECODER_MIXED enum that's not needed anymore
- Introduce helpers to access resource and perf meta data
- Introduce 'struct cxl_dpa_partition' and 'struct cxl_range_info'
- Make cxl_dpa_alloc() DPA partition number agnostic
- Remove cxl_decoder_mode
- Cleanup partition size and perf helpers
- Remove unused CXL partition values
- Add logging support for CXL CPER endpoint and port protocol errors:
- Prefix protocol error struct and function names with cxl_
- Move protocol error definitions and structures to a common location
- Remove drivers/firmware/efi/cper_cxl.h to include/linux/cper.h
- Add support in GHES to process CXL CPER protocol errors
- Process CXL CPER protocol errors
- Add trace logging for CXL PCIe port RAS errors
- Remove redundant gp_port init
- Add validation of cxl device serial number
- CXL ABI documentation updates/fixups
- A series that uses guard() to clean up open coded mutex lockings and
remove gotos for error handling.
- Some followup patches to support dirty shutdown accounting:
- Add helper to retrieve DVSEC offset for dirty shutdown registers
- Rename cxl_get_dirty_shutdown() to cxl_arm_dirty_shutdown()
- Add support for dirty shutdown count via sysfs
- cxl_test support for dirty shutdown
- A series to support CXL mailbox Features commands.
Mostly in preparation for CXL EDAC code to utilize the Features
commands. It's also in preparation for CXL fwctl support to utilize
the CXL Features. The commands include "Get Supported Features", "Get
Feature", and "Set Feature".
- A series to support extended linear cache support described by the
ACPI HMAT table.
The addition helps enumerate the cache and also provides additional
RAS reporting support for configuration with extended linear cache.
(and related fixes for the series).
- An update to cxl_test to support a 3-way capable CFMWS
- A documentation fix to remove unused "mixed mode"
* tag 'cxl-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (39 commits)
cxl/region: Fix the first aliased address miscalculation
cxl/region: Quiet some dev_warn()s in extended linear cache setup
cxl/Documentation: Remove 'mixed' from sysfs mode doc
cxl: Fix warning from emitting resource_size_t as long long int on 32bit systems
cxl/test: Define a CFMWS capable of a 3 way HB interleave
cxl/mem: Do not return error if CONFIG_CXL_MCE unset
tools/testing/cxl: Set Shutdown State support
cxl/pmem: Export dirty shutdown count via sysfs
cxl/pmem: Rename cxl_dirty_shutdown_state()
cxl/pci: Introduce cxl_gpf_get_dvsec()
cxl/pci: Support Global Persistent Flush (GPF)
cxl: Document missing sysfs files
cxl: Plug typos in ABI doc
cxl/pmem: debug invalid serial number data
cxl/cdat: Remove redundant gp_port initialization
cxl/memdev: Remove unused partition values
cxl/region: Drop goto pattern of construct_region()
cxl/region: Drop goto pattern in cxl_dax_region_alloc()
cxl/core: Use guard() to drop goto pattern of cxl_dpa_alloc()
cxl/core: Use guard() to drop the goto pattern of cxl_dpa_free()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.15-rc1. Included in here are:
- Thunderbolt driver and core api updates for new hardware and
features
- usb-storage const array cleanups
- typec driver updates
- dwc3 driver updates
- xhci driver updates and bugfixes
- small USB documentation updates
- usb cdns3 driver updates
- usb gadget driver updates
- other small driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (92 commits)
thunderbolt: Do not add non-active NVM if NVM upgrade is disabled for retimer
thunderbolt: Scan retimers after device router has been enumerated
usb: host: cdns3: forward lost power information to xhci
usb: host: xhci-plat: allow upper layers to signal power loss
usb: xhci: change xhci_resume() parameters to explicit the desired info
usb: cdns3-ti: run HW init at resume() if HW was reset
usb: cdns3-ti: move reg writes to separate function
usb: cdns3: call cdns_power_is_lost() only once in cdns_resume()
usb: cdns3: rename hibernated argument of role->resume() to lost_power
usb: xhci: tegra: rename `runtime` boolean to `is_auto_runtime`
usb: host: xhci-plat: mvebu: use ->quirks instead of ->init_quirk() func
usb: dwc3: Don't use %pK through printk
usb: core: Don't use %pK through printk
usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev()
dt-bindings: usb: qcom,dwc3: Synchronize minItems for interrupts and -names
usb: common: usb-conn-gpio: switch psy_cfg from of_node to fwnode
usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running
usb: xhci: Don't change the status of stalled TDs on failed Stop EP
xhci: Avoid queuing redundant Stop Endpoint command for stalled endpoint
xhci: Handle spurious events on Etron host isoc enpoints
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.15-rc1.
Include in here are the following:
- more great tty layer cleanups from Jiri. Someday this will be done,
but that's not going to be any year soon...
- kdb debug driver reverts to fix a reported issue
- lots of .dts binding updates for different devices with serial
devices
- lots of tiny updates and tweaks and a few bugfixes for different
serial drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
tty: serial: fsl_lpuart: Fix unused variable 'sport' build warning
serial: stm32: do not deassert RS485 RTS GPIO prematurely
serial: 8250: add driver for NI UARTs
dt-bindings: serial: snps-dw-apb-uart: document RZ/N1 binding without DMA
serial: icom: fix code format problems
serial: sh-sci: Save and restore more registers
tty: serial: pl011: remove incorrect of_match_ptr annotation
dt-bindings: serial: snps-dw-apb-uart: Add support for rk3562
tty: serial: lpuart: only disable CTS instead of overwriting the whole UARTMODIR register
tty: caif: removed unused function debugfs_tx()
serial: 8250_dma: terminate correct DMA in tx_dma_flush()
tty: serial: fsl_lpuart: rename register variables more specifically
tty: serial: fsl_lpuart: use port struct directly to simply code
tty: serial: fsl_lpuart: Use u32 and u8 for register variables
tty: serial: fsl_lpuart: disable transmitter before changing RS485 related registers
tty: serial: 8250: Add Brainboxes XC devices
dt-bindings: serial: fsl-lpuart: support i.MX94
tty: serial: 8250: Add some more device IDs
dt-bindings: serial: samsung: add exynos7870-uart compatible
serial: 8250_dw: Comment possible corner cases in serial_out() implementation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver cleanups and updates for
6.15-rc1.
As expected, with the introduction of the gpib drivers, loads of
cleanups and fixes showed up, with the huge majority of changes being
for that chunk of drivers. This is good and shows that the community
can fix up things in public when asked to. Also included in here are:
- small sm750fb cleanups
- tiny rtl8723bs cleanups
- more vchiq_arm cleanups and changes, hopefully this will get out of
staging soon
All of these have been in linux-next for almost 2 weeks now with no
reported issues"
* tag 'staging-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (76 commits)
staging: rtl8723bs: fixed a unnecessary parentheses coding style issue
staging: vchiq_arm: Improve initial VCHIQ connect
staging: vchiq_arm: Create keep-alive thread during probe
staging: vchiq_arm: Stop kthreads if vchiq cdev register fails
staging: vchiq_arm: Fix possible NPR of keep-alive thread
staging: vchiq_arm: Register debugfs after cdev
staging: vchiq_arm: Don't use %pK through printk
staging: rtl8723bs: select CONFIG_CRYPTO_LIB_AES
staging: rtl8723bs: Remove some unused functions, macros, and structs
staging: gpib: change return type of t1_delay function to report errors
staging: gpib: remove commented-out lines
staging: gpib: fix kernel-doc section for usb_gpib_line_status() function
staging: gpib: fix kernel-doc section for function usb_gpib_interface_clear()
staging: gpib: fix kernel-doc section for write_loop() function
staging: gpib: Removing typedef for gpib_board
staging: gpib: struct typing for gpib_gboard_t
staging: gpib: tnt4882: struct gpib_board
staging: gpib: tms9914: struct gpib_board
staging: gpib: pc2: struct gpib_board
staging: gpib: ni_usb_gpib: struct gpib_board
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are two counter driver fixes that I realized I never sent to you
for 6.14-final.
They have been in my for weeks, as well as linux-next, my fault for
not sending them earlier. They are:
- bugfix for stm32-lptimer-cnt counter driver
- bugfix for microchip-tcb-capture counter driver
Again, these have been in linux-next for weeks with no reported
issues"
* tag 'char-misc-6.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
counter: microchip-tcb-capture: Fix undefined counter channel state on probe
counter: stm32-lptimer-cnt: fix error handling when enabling
|
|
Protect the parser TCAM/SRAM memory, and the cached (shadow) SRAM
information, from concurrent modifications.
Both the TCAM and SRAM tables are indirectly accessed by configuring
an index register that selects the row to read or write to. This means
that operations must be atomic in order to, e.g., avoid spreading
writes across multiple rows. Since the shadow SRAM array is used to
find free rows in the hardware table, it must also be protected in
order to avoid TOCTOU errors where multiple cores allocate the same
row.
This issue was detected in a situation where `mvpp2_set_rx_mode()` ran
concurrently on two CPUs. In this particular case the
MVPP2_PE_MAC_UC_PROMISCUOUS entry was corrupted, causing the
classifier unit to drop all incoming unicast - indicated by the
`rx_classifier_drops` counter.
Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250401065855.3113635-1-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With commit 8533b14b3d65 ("eth: mlx4: create a page pool for Rx") mlx4
started using functions guarded by PAGE_POOL. This change introduced
build errors when CONFIG_MLX4_EN is set but CONFIG_PAGE_POOL is not:
ld: vmlinux.o: in function `mlx4_en_alloc_frags':
en_rx.c:(.text+0xa5eaf9): undefined reference to `page_pool_alloc_pages'
ld: vmlinux.o: in function `mlx4_en_create_rx_ring':
(.text+0xa5ee91): undefined reference to `page_pool_create'
Make MLX4_EN select PAGE_POOL to fix the ml;x4 build errors.
Fixes: 8533b14b3d65 ("eth: mlx4: create a page pool for Rx")
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250401015315.2306092-1-gthelen@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ETS Qdisc schedules SP bands in a priority order assigning band-0 the
highest priority (band-0 > band-1 > .. > band-n) while EN7581 arranges
SP bands in a priority order assigning band-7 the highest priority
(band-7 > band-6, .. > band-n).
Fix priomap check in airoha_qdma_set_tx_ets_sched routine in order to
align ETS Qdisc and airoha_eth driver SP priority ordering.
Fixes: b56e4d660a96 ("net: airoha: Enforce ETS Qdisc priomap")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20250331-airoha-ets-validate-priomap-v1-1-60a524488672@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the following kernel warning deleting HTB offloaded leafs and/or root
HTB qdisc in airoha_eth driver properly reporting qid in
airoha_tc_get_htb_get_leaf_queue routine.
$tc qdisc replace dev eth1 root handle 10: htb offload
$tc class add dev eth1 arent 10: classid 10:4 htb rate 100mbit ceil 100mbit
$tc qdisc replace dev eth1 parent 10:4 handle 4: ets bands 8 \
quanta 1514 3028 4542 6056 7570 9084 10598 12112
$tc qdisc del dev eth1 root
[ 55.827864] ------------[ cut here ]------------
[ 55.832493] WARNING: CPU: 3 PID: 2678 at 0xffffffc0798695a4
[ 55.956510] CPU: 3 PID: 2678 Comm: tc Tainted: G O 6.6.71 #0
[ 55.963557] Hardware name: Airoha AN7581 Evaluation Board (DT)
[ 55.969383] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 55.976344] pc : 0xffffffc0798695a4
[ 55.979851] lr : 0xffffffc079869a20
[ 55.983358] sp : ffffffc0850536a0
[ 55.986665] x29: ffffffc0850536a0 x28: 0000000000000024 x27: 0000000000000001
[ 55.993800] x26: 0000000000000000 x25: ffffff8008b19000 x24: ffffff800222e800
[ 56.000935] x23: 0000000000000001 x22: 0000000000000000 x21: ffffff8008b19000
[ 56.008071] x20: ffffff8002225800 x19: ffffff800379d000 x18: 0000000000000000
[ 56.015206] x17: ffffffbf9ea59000 x16: ffffffc080018000 x15: 0000000000000000
[ 56.022342] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000001
[ 56.029478] x11: ffffffc081471008 x10: ffffffc081575a98 x9 : 0000000000000000
[ 56.036614] x8 : ffffffc08167fd40 x7 : ffffffc08069e104 x6 : ffffff8007f86000
[ 56.043748] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000001
[ 56.050884] x2 : 0000000000000000 x1 : 0000000000000250 x0 : ffffff800222c000
[ 56.058020] Call trace:
[ 56.060459] 0xffffffc0798695a4
[ 56.063618] 0xffffffc079869a20
[ 56.066777] __qdisc_destroy+0x40/0xa0
[ 56.070528] qdisc_put+0x54/0x6c
[ 56.073748] qdisc_graft+0x41c/0x648
[ 56.077324] tc_get_qdisc+0x168/0x2f8
[ 56.080978] rtnetlink_rcv_msg+0x230/0x330
[ 56.085076] netlink_rcv_skb+0x5c/0x128
[ 56.088913] rtnetlink_rcv+0x14/0x1c
[ 56.092490] netlink_unicast+0x1e0/0x2c8
[ 56.096413] netlink_sendmsg+0x198/0x3c8
[ 56.100337] ____sys_sendmsg+0x1c4/0x274
[ 56.104261] ___sys_sendmsg+0x7c/0xc0
[ 56.107924] __sys_sendmsg+0x44/0x98
[ 56.111492] __arm64_sys_sendmsg+0x20/0x28
[ 56.115580] invoke_syscall.constprop.0+0x58/0xfc
[ 56.120285] do_el0_svc+0x3c/0xbc
[ 56.123592] el0_svc+0x18/0x4c
[ 56.126647] el0t_64_sync_handler+0x118/0x124
[ 56.131005] el0t_64_sync+0x150/0x154
[ 56.134660] ---[ end trace 0000000000000000 ]---
Fixes: ef1ca9271313b ("net: airoha: Add sched HTB offload support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250331-airoha-htb-qdisc-offload-del-fix-v1-1-4ea429c2c968@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Prevent cpufreq_update_limits() from crashing the kernel due to a NULL
pointer dereference when it is called before registering a cpufreq
driver, for instance as a result of a notification triggered by the
platform firmware (Rafael Wysocki)"
* tag 'pm-6.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Reference count policy in cpufreq_update_limits()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These are fixes and cleanups on top of the previous ACPI material for
6.15-rc1 merged recently:
- Extend the Lenovo Yoga Tab 3 ACPI quirk to skip GPIO event-handlers
along with ACPI AC and battery which makes it work with Linux when
started in the Windows mode (Hans de Goede)
- Prevent the ACPI processor idle driver from being used on systems
without _CST and with invalid C2/C3 in FADT in order to restore its
previous (and expected) behavior that has been altered
inadvertently by a recent code change (Giovanni Gherdovich)
- Skip ACPI IRQ override on ASUS Vivobook 14 X1404VAP to make the
internal keyboard work on it (Paul Menzel)
- Make the ACPI backlight driver handle fetching EDID passed as
ACPI_TYPE_PACKAGE which is not specification-compliant, but has
been encountered in the field (Gergo Koteles)
- Simplify the aggregation of choices in the ACPI platform-profile
driver which has been unlocked by recent modifications of that
driver (Kurt Borja)
- Use str_enabled_disabled() instead of hardcoded strings in the ACPI
code related to NUMA (Thorsten Blum)
- Add Intel OC Watchdog device IDs to non-PNP device list to prevent
PNP from claiming the devices that carry these IDs in which case
non-PNP drivers cannot bind to them (Diogo Ivo)"
* tag 'acpi-6.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Handle fetching EDID as ACPI_TYPE_PACKAGE
ACPI: processor: idle: Return an error if both P_LVL{2,3} idle states are invalid
ACPI: platform_profile: Optimize _aggregate_choices()
ACPI: x86: Extend Lenovo Yoga Tab 3 quirk with skip GPIO event-handlers
ACPI: resource: Skip IRQ override on ASUS Vivobook 14 X1404VAP
ACPI: PNP: Add Intel OC Watchdog IDs to non-PNP device list
ACPI: NUMA: Use str_enabled_disabled() helper function
|
|
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250326040659.1190696-1-nichen@iscas.ac.cn
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
- Remove the IBM CAPI (cxl) driver
Thanks to Andrew Donnellan.
* tag 'powerpc-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
docs: Fix references to IBM CAPI (cxl) removal version
cxl: Remove driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"These are objtool fixes and updates by Josh Poimboeuf, centered around
the fallout from the new CONFIG_OBJTOOL_WERROR=y feature, which,
despite its default-off nature, increased the profile/impact of
objtool warnings:
- Improve error handling and the presentation of warnings/errors
- Revert the new summary warning line that some test-bot tools
interpreted as new regressions
- Fix a number of objtool warnings in various drivers, core kernel
code and architecture code. About half of them are potential
problems related to out-of-bounds accesses or potential undefined
behavior, the other half are additional objtool annotations
- Update objtool to latest (known) compiler quirks and objtool bugs
triggered by compiler code generation
- Misc fixes"
* tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
objtool/loongarch: Add unwind hints in prepare_frametrace()
rcu-tasks: Always inline rcu_irq_work_resched()
context_tracking: Always inline ct_{nmi,irq}_{enter,exit}()
sched/smt: Always inline sched_smt_active()
objtool: Fix verbose disassembly if CROSS_COMPILE isn't set
objtool: Change "warning:" to "error: " for fatal errors
objtool: Always fail on fatal errors
Revert "objtool: Increase per-function WARN_FUNC() rate limit"
objtool: Append "()" to function name in "unexpected end of section" warning
objtool: Ignore end-of-section jumps for KCOV/GCOV
objtool: Silence more KCOV warnings, part 2
objtool, drm/vmwgfx: Don't ignore vmw_send_msg() for ORC
objtool: Fix STACK_FRAME_NON_STANDARD for cold subfunctions
objtool: Fix segfault in ignore_unreachable_insn()
objtool: Fix NULL printf() '%s' argument in builtin-check.c:save_argv()
objtool, lkdtm: Obfuscate the do_nothing() pointer
objtool, regulator: rk808: Remove potential undefined behavior in rk806_set_mode_dcdc()
objtool, ASoC: codecs: wcd934x: Remove potential undefined behavior in wcd934x_slim_irq_handler()
objtool, Input: cyapa - Remove undefined behavior in cyapa_update_fw_store()
objtool, panic: Disable SMAP in __stack_chk_fail()
...
|
|
With CONFIG_COMPILE_TEST && !CONFIG_HAVE_CLK, pwm_mediatek_config() has a
divide-by-zero in the following line:
do_div(resolution, clk_get_rate(pc->clk_pwms[pwm->hwpwm]));
due to the fact that the !CONFIG_HAVE_CLK version of clk_get_rate()
returns zero.
This is presumably just a theoretical problem: COMPILE_TEST overrides
the dependency on RALINK which would select COMMON_CLK. Regardless it's
a good idea to check for the error explicitly to avoid divide-by-zero.
Fixes the following warning:
drivers/pwm/pwm-mediatek.o: warning: objtool: .text: unexpected end of section
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/fb56444939325cc173e752ba199abd7aeae3bf12.1742852847.git.jpoimboe@kernel.org
[ukleinek: s/CONFIG_CLK/CONFIG_HAVE_CLK/]
Fixes: caf065f8fd58 ("pwm: Add MediaTek PWM support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/9e78a0796acba3435553ed7db1c7965dcffa6215.1743501688.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
With SRIOV enabled, idpf ends up calling into idpf_remove() twice.
First via idpf_shutdown() and then again when idpf_remove() calls into
sriov_disable(), because the VF devices use the idpf driver, hence the
same remove routine. When that happens, it is possible for the adapter
to be NULL from the first call to idpf_remove(), leading to a NULL
pointer dereference.
echo 1 > /sys/class/net/<netif>/device/sriov_numvfs
reboot
BUG: kernel NULL pointer dereference, address: 0000000000000020
...
RIP: 0010:idpf_remove+0x22/0x1f0 [idpf]
...
? idpf_remove+0x22/0x1f0 [idpf]
? idpf_remove+0x1e4/0x1f0 [idpf]
pci_device_remove+0x3f/0xb0
device_release_driver_internal+0x19f/0x200
pci_stop_bus_device+0x6d/0x90
pci_stop_and_remove_bus_device+0x12/0x20
pci_iov_remove_virtfn+0xbe/0x120
sriov_disable+0x34/0xe0
idpf_sriov_configure+0x58/0x140 [idpf]
idpf_remove+0x1b9/0x1f0 [idpf]
idpf_shutdown+0x12/0x30 [idpf]
pci_device_shutdown+0x35/0x60
device_shutdown+0x156/0x200
...
Replace the direct idpf_remove() call in idpf_shutdown() with
idpf_vc_core_deinit() and idpf_deinit_dflt_mbx(), which perform
the bulk of the cleanup, such as stopping the init task, freeing IRQs,
destroying the vports and freeing the mailbox. This avoids the calls to
sriov_disable() in addition to a small netdev cleanup, and destroying
workqueues, which don't seem to be required on shutdown.
Reported-by: Yuying Ma <yuma@redhat.com>
Fixes: e850efed5e15 ("idpf: add module register and probe functionality")
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The commit 23c0e5a16bcc ("ixgbe: Add link management support for E610
device") introduced incorrect media type detection for E610 device. It
reproduces when advertised speed is modified after driver reload. Clear
the previous outdated PHY type high value.
Reproduction steps:
modprobe ixgbe
ethtool -s eth0 advertise 0x1000000000000
modprobe -r ixgbe
modprobe ixgbe
ethtool -s eth0 advertise 0x1000000000000
Result before the fix:
netlink error: link settings update failed
netlink error: Invalid argument
Result after the fix:
No output error
Fixes: 23c0e5a16bcc ("ixgbe: Add link management support for E610 device")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Starting from Meteor Lake, the Kumeran interface between the integrated
MAC and the I219 PHY works at a different frequency. This causes sporadic
MDI errors when accessing the PHY, and in rare circumstances could lead
to packet corruption.
To overcome this, introduce minor changes to the Kumeran idle
state (K1) parameters during device initialization. Hardware reset
reverts this configuration, therefore it needs to be applied in a few
places.
Fixes: cc23f4f0b6b9 ("e1000e: Add support for Meteor Lake")
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fixes TX frame drops in AF_XDP zero copy mode when budget < 4.
xsk_tx_peek_desc() consumed TX frame and it was ignored because of
low budget. Not even AF_XDP completion was done for dropped frames.
It can be reproduced on i226 by sending 100000x 60 B frames with
launch time set to minimal IPG (672 ns between starts of frames)
on 1Gbit/s. Always 1026 frames are not sent and are missing a
completion.
Fixes: 9acf59a752d4c ("igc: Enable TX via AF_XDP zero-copy")
Signed-off-by: Zdenek Bouska <zdenek.bouska@siemens.com>
Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Reviewed-by: Florian Bezdeka <florian.bezdeka@siemens.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In commit b65969856d4f ("igc: Link queues to NAPI instances"), the XSK
queues were incorrectly unmapped from their NAPI instances. After
discussion on the mailing list and the introduction of a test to codify
the expected behavior, we can see that the unmapping causes the
check_xsk test to fail:
NETIF=enp86s0 ./tools/testing/selftests/drivers/net/queues.py
[...]
# Check| ksft_eq(q.get('xsk', None), {},
# Check failed None != {} xsk attr on queue we configured
not ok 4 queues.check_xsk
After this commit, the test passes:
ok 4 queues.check_xsk
Note that the test itself is only in net-next, so I tested this change
by applying it to my local net-next tree, booting, and running the test.
Cc: stable@vger.kernel.org
Fixes: b65969856d4f ("igc: Link queues to NAPI instances")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Merge an ACPI backlight (video) driver fix, an ACPI platform-profile
driver optimization, and a miscellaneous ACPI-related cleanup for
6.15-rc1:
- Make the ACPI backlight driver handle fetching EDID as
ACPI_TYPE_PACKAGE which is not specification-compliant, but
has been encountered in the field (Gergo Koteles).
- Simplify the aggregation of choices in the ACPI platform-profile
driver which has become possible after recent modifications of that
driver (Kurt Borja).
- Use str_enabled_disabled() instead of hardcoded strings in the ACPI
code related to NUMA (Thorsten Blum).
* acpi-video:
ACPI: video: Handle fetching EDID as ACPI_TYPE_PACKAGE
* acpi-platform-profile:
ACPI: platform_profile: Optimize _aggregate_choices()
* acpi-misc:
ACPI: NUMA: Use str_enabled_disabled() helper function
|
|
Merge an x86-specific ACPI fix, an ACPI processor driver fix, and a new
ACPI resources management quirk for 6.15-rc1:
- Extend the Lenovo Yoga Tab 3 ACPI quirk to skip GPIO event-handlers
along with ACPI AC and battery which makes it work with Linux when
started in the Windows mode (Hans de Goede).
- Prevent the ACPI processor idle driver from being used on systems
without _CST and with invalid C2/C3 in FADT in order to restore its
previous (and expected) behavior that has been altered inadvertently
by a recent code change (Giovanni Gherdovich).
- Skip ACPI IRQ override on ASUS Vivobook 14 X1404VAP to make the
internal keyboard work on it (Paul Menzel).
* acpi-x86:
ACPI: x86: Extend Lenovo Yoga Tab 3 quirk with skip GPIO event-handlers
* acpi-processor:
ACPI: processor: idle: Return an error if both P_LVL{2,3} idle states are invalid
* acpi-resource:
ACPI: resource: Skip IRQ override on ASUS Vivobook 14 X1404VAP
|
|
The lookup table forces the use of the "pinctrl-bcm2835" GPIO chip
provider and essentially assumes that there is going to be such a
provider, and if not, we will fail to set-up the SPI device.
While this is true on Raspberry Pi based systems (2835/36/37, 2711,
2712), this is not true on 7712/77122 Broadcom STB systems which use the
SPI driver, but not the GPIO driver.
There used to be an early check:
chip = gpiochip_find("pinctrl-bcm2835", chip_match_name);
if (!chip)
return 0;
which would accomplish that nicely, bring something similar back by
checking for the compatible strings matched by the pinctrl-bcm2835.c
driver, if there is no Device Tree node matching those compatible
strings, then we won't find any GPIO provider registered by the
"pinctrl-bcm2835" driver.
Fixes: 21f252cd29f0 ("spi: bcm2835: reduce the abuse of the GPIO API")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250401233603.2938955-1-florian.fainelli@broadcom.com
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The skb dequeued from tx_queue is lost when wl1251_ps_elp_wakeup fails
with a -ETIMEDOUT error. Fix that by queueing the skb back to tx_queue.
Fixes: c5483b719363 ("wl12xx: check if elp wakeup failed")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Michael Nemanov <michael.nemanov@ti.com>
Link: https://patch.msgid.link/20250330104532.44935-1-abdun.nihaal@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The memory allocated for settings is not freed when brcmf_of_probe
fails. Fix that by freeing settings before returning in error path.
Fixes: 0ff0843310b7 ("wifi: brcmfmac: Add optional lpo clock enable support")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250330103425.44197-1-abdun.nihaal@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The "resp_len" isn't initialized if iwl_dhc_resp_data() fails.
Fixes: b611cf6b57a8 ("wifi: iwlwifi: mld: add support for DHC_TOOLS_UMAC_GET_TAS_STATUS command")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/add9c9e2-3b44-4e0a-a4aa-7326f6425baf@stanley.mountain
[fix typo in commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The memory pointed to by priv is freed at the end of at76_delete_device
function (using ieee80211_free_hw). But the code then accesses the udev
field of the freed object to put the USB device. This may also lead to a
memory leak of the usb device. Fix this by using udev from interface.
Fixes: 29e20aa6c6af ("at76c50x-usb: fix use after free on failure path in at76_probe()")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Link: https://patch.msgid.link/20250330103110.44080-1-abdun.nihaal@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The newly added driver causes multiple build problems when CONFIG_PM_SLEEP is
disabled:
drivers/net/wireless/intel/iwlwifi/mld/mac80211.c:1982:12: error: 'iwl_mld_resume' defined but not used [-Werror=unused-function]
1982 | static int iwl_mld_resume(struct ieee80211_hw *hw)
| ^~~~~~~~~~~~~~
drivers/net/wireless/intel/iwlwifi/mld/mac80211.c:1960:1: error: 'iwl_mld_suspend' defined but not used [-Werror=unused-function]
1960 | iwl_mld_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan)
| ^~~~~~~~~~~~~~~
drivers/net/wireless/intel/iwlwifi/mld/mac80211.c:1946:13: error: 'iwl_mld_set_wakeup' defined but not used [-Werror=unused-function]
1946 | static void iwl_mld_set_wakeup(struct ieee80211_hw *hw, bool enabled)
| ^~~~~~~~~~~~~~~~~~
drivers/net/wireless/intel/iwlwifi/mld/mac80211.c: In function 'iwl_mld_mac80211_start':
drivers/net/wireless/intel/iwlwifi/mld/mac80211.c:504:20: error: 'ret' is used uninitialized [-Werror=uninitialized]
504 | if (!in_d3 || ret) {
| ^~
drivers/net/wireless/intel/iwlwifi/mld/mac80211.c:478:13: note: 'ret' was declared here
478 | int ret;
| ^~~
Hide the unused functions and make sure the 'ret' variable is not used
before the initialization.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250325084340.378724-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
