| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- hisi: update maintainership
- fix several issues in rtl9300 xfer:
- check message length boundaries
- correct multi-byte value composition on write
- increase polling timeout
- fix block transfer protocol
* tag 'i2c-for-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rtl9300: Add missing count byte for SMBus Block Ops
i2c: rtl9300: Increase timeout for transfer polling
i2c: rtl9300: Fix multi-byte I2C write
i2c: rtl9300: Fix out-of-bounds bug in rtl9300_i2c_smbus_xfer
MAINTAINERS: i2c: Update i2c_hisi entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/iio fixes from Greg KH:
"Here are a small number of char/misc/iio and other driver fixes for
6.17-rc3. Included in here are:
- IIO driver bugfixes for reported issues
- bunch of comedi driver fixes
- most core bugfix
- fpga driver bugfix
- cdx driver bugfix
All of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
most: core: Drop device reference after usage in get_channel()
comedi: Make insn_rw_emulate_bits() do insn->n samples
comedi: Fix use of uninitialized memory in do_insn_ioctl() and do_insnlist_ioctl()
comedi: pcl726: Prevent invalid irq number
cdx: Fix off-by-one error in cdx_rpmsg_probe()
fpga: zynq_fpga: Fix the wrong usage of dma_map_sgtable()
iio: pressure: bmp280: Use IS_ERR() in bmp280_common_probe()
iio: light: as73211: Ensure buffer holes are zeroed
iio: adc: rzg2l_adc: Set driver data before enabling runtime PM
iio: adc: rzg2l: Cleanup suspend/resume path
iio: adc: ad7380: fix missing max_conversion_rate_hz on adaq4381-4
iio: adc: bd79124: Add GPIOLIB dependency
iio: imu: inv_icm42600: change invalid data error to -EBUSY
iio: adc: ad7124: fix channel lookup in syscalib functions
iio: temperature: maxim_thermocouple: use DMA-safe buffer for spi_read()
iio: adc: ad7173: prevent scan if too many setups requested
iio: proximity: isl29501: fix buffered read on big-endian systems
iio: accel: sca3300: fix uninitialized iio scan data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 6.17-rc3 to resolve a bunch
of reported issues. Included in here are:
- typec driver fixes
- dwc3 new device id
- dwc3 driver fixes
- new usb-storage driver quirks
- xhci driver fixes
- other tiny USB driver fixes to resolve bugs
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: xhci: fix host not responding after suspend and resume
usb: xhci: Fix slot_id resource race conflict
usb: typec: fusb302: Revert incorrect threaded irq fix
USB: core: Update kerneldoc for usb_hcd_giveback_urb()
usb: typec: maxim_contaminant: re-enable cc toggle if cc is open and port is clean
usb: typec: maxim_contaminant: disable low power mode when reading comparator values
usb: dwc3: Remove WARN_ON for device endpoint command timeouts
USB: storage: Ignore driver CD mode for Realtek multi-mode Wi-Fi dongles
usb: storage: realtek_cr: Use correct byte order for bcs->Residue
usb: chipidea: imx: improve usbmisc_imx7d_pullup()
kcov, usb: Don't disable interrupts in kcov_remote_start_usb_softirq()
usb: dwc3: pci: add support for the Intel Wildcat Lake
usb: dwc3: Ignore late xferNotReady event to prevent halt timeout
USB: storage: Add unusual-devs entry for Novatek NTK96550-based camera
usb: core: hcd: fix accessing unmapped memory in SINGLE_STEP_SET_FEATURE test
usb: renesas-xhci: Fix External ROM access timeouts
usb: gadget: tegra-xudc: fix PM use count underflow
usb: quirks: Add DELAY_INIT quick for another SanDisk 3.2Gen1 Flash Drive
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes. Looks like things did indeed get busier after rc2,
nothing seems too major, but stuff scattered all over the place,
amdgpu, xe, i915, hibmc, rust support code, and other small fixes.
rust:
- drm device memory layout and safety fixes
tests:
- Endianness fixes
gpuvm:
- docs warning fix
panic:
- fix division on 32-bit arm
i915:
- TypeC DP display Fixes
- Silence rpm wakeref asserts on GEN11_GU_MISC_IIR access
- Relocate compression repacking WA for JSL/EHL
xe:
- xe_vm_create fixes
- fix vm bind ioctl double free
amdgpu:
- Replay fixes
- SMU14 fix
- Null check DC fixes
- DCE6 DC fixes
- Misc DC fixes
bridge:
- analogix_dp: devm_drm_bridge_alloc() error handling fix
habanalabs:
- Memory deallocation fix
hibmc:
- modesetting black screen fixes
- fix UAF on irq
- fix leak on i2c failure path
nouveau:
- memory leak fixes
- typos
rockchip:
- Kconfig fix
- register caching fix"
* tag 'drm-fixes-2025-08-23-1' of https://gitlab.freedesktop.org/drm/kernel: (49 commits)
drm/xe: Fix vm_bind_ioctl double free bug
drm/xe: Move ASID allocation and user PT BO tracking into xe_vm_create
drm/xe: Assign ioctl xe file handler to vm in xe_vm_create
drm/i915/gt: Relocate compression repacking WA for JSL/EHL
drm/i915: silence rpm wakeref asserts on GEN11_GU_MISC_IIR access
drm/amd/display: Fix DP audio DTO1 clock source on DCE 6.
drm/amd/display: Fix fractional fb divider in set_pixel_clock_v3
drm/amd/display: Don't print errors for nonexistent connectors
drm/amd/display: Don't warn when missing DCE encoder caps
drm/amd/display: Fill display clock and vblank time in dce110_fill_display_configs
drm/amd/display: Find first CRTC and its line time in dce110_fill_display_configs
drm/amd/display: Adjust DCE 8-10 clock, don't overclock by 15%
drm/amd/display: Don't overclock DCE 6 by 15%
drm/amd/display: Add null pointer check in mod_hdcp_hdcp1_create_session()
drm/amd/display: Fix Xorg desktop unresponsive on Replay panel
drm/amd/display: Avoid a NULL pointer dereference
drm/amdgpu/swm14: Update power limit logic
drm/amd/display: Revert Add HPO encoder support to Replay
drm/i915/icl+/tc: Convert AUX powered WARN to a debug message
drm/i915/lnl+/tc: Use the cached max lane count value
...
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- xe_vm_create fixes (Piotr)
- Fix vm_bind_ioctl double free (Christoph)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aKdxiw9hvO6mcyKs@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"Two very minor fixes:
- Fix mismatched kvalloc()/kfree()
- Spelling fixes in documentation"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Fix spelling errors in iommufd.rst
iommufd: viommu: free memory allocated by kvcalloc() using kvfree()
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A bunch of fixes for 6.17:
- analogix_dp: devm_drm_bridge_alloc() error handling fix
- gaudi: Memory deallocation fix
- gpuvm: Documentation warning fix
- hibmc: Various misc fixes
- nouveau: Memory leak fixes, typos
- panic: u64 division handling on 32 bits architecture fix
- rockchip: Kconfig fix, register caching fix
- rust: memory layout and safety fixes
- tests: Endianness fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://lore.kernel.org/r/20250821-economic-dandelion-rooster-c57fa9@houat
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- When kernel lockdown is active userspace tools that rely on read
operations only are unnecessarily blocked. Fix that by avoiding ioctl
registration during lockdown
- Invalid NULL pointer accesses succeed due to the lowcore is always
mapped the identity mapping pinned to zero. To fix that never map the
first two pages of physical memory with identity mapping
- Fix invalid SCCB present check in the SCLP interrupt handler
- Update defconfigs
* tag 's390-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/hypfs: Enable limited access during lockdown
s390/hypfs: Avoid unnecessary ioctl registration in debugfs
s390/mm: Do not map lowcore with identity mapping
s390/sclp: Fix SCCB present check
s390/configs: Set HZ=1000
s390/configs: Update defconfigs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two small cleanups which are both relevant only when running as a Xen
guest"
* tag 'for-linus-6.17-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
drivers/xen/xenbus: remove quirk for Xen 3.x
compiler: remove __ADDRESSABLE_ASM{_STR,}() again
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- amd/hsmp:
- Ensure sock->metric_tbl_addr is non-NULL
- Register driver even if hwmon registration fails
- amd/pmc: Drop SMU F/W match for Cezanne
- dell-smbios-wmi: Separate "priority" from WMI device ID
- hp-wmi: mark Victus 16-r1xxx for Victus s fan and thermal profile
support
- intel-uncore-freq: Check write blocked for efficiency latency control
* tag 'platform-drivers-x86-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: hp-wmi: mark Victus 16-r1xxx for victus_s fan and thermal profile support
platform/x86/amd/hsmp: Ensure success even if hwmon registration fails
platform/x86/amd/hsmp: Ensure sock->metric_tbl_addr is non-NULL
platform/x86/intel-uncore-freq: Check write blocked for ELC
platform/x86/amd: pmc: Drop SMU F/W match for Cezanne
platform/x86: dell-smbios-wmi: Stop touching WMI device ID
|
|
Pull block fixes from Jens Axboe:
"A set of fixes for block that should go into this tree. A bit larger
than what I usually have at this point in time, a lot of that is the
continued fixing of the lockdep annotation for queue freezing that we
recently added, which has highlighted a number of little issues here
and there. This contains:
- MD pull request via Yu:
- Add a legacy_async_del_gendisk mode, to prevent a user tools
regression. New user tools releases will not use such a mode,
the old release with a new kernel now will have warning about
deprecated behavior, and we prepare to remove this legacy mode
after about a year later
- The rename in kernel causing user tools build failure, revert
the rename in mdp_superblock_s
- Fix a regression that interrupted resync can be shown as
recover from mdstat or sysfs
- Improve file size detection for loop, particularly for networked
file systems, by using getattr to get the size rather than the
cached inode size.
- Hotplug CPU lock vs queue freeze fix
- Lockdep fix while updating the number of hardware queues
- Fix stacking for PI devices
- Silence bio_check_eod() for the known case of device removal where
the size is truncated to 0 sectors"
* tag 'block-6.17-20250822' of git://git.kernel.dk/linux:
block: avoid cpu_hotplug_lock depedency on freeze_lock
block: decrement block_rq_qos static key in rq_qos_del()
block: skip q->rq_qos check in rq_qos_done_bio()
blk-mq: fix lockdep warning in __blk_mq_update_nr_hw_queues
block: tone down bio_check_eod
loop: use vfs_getattr_nosec for accurate file size
loop: Consolidate size calculation logic into lo_calculate_size()
block: remove newlines from the warnings in blk_validate_integrity_limits
block: handle pi_tuple_size in queue_limits_stack_integrity
selftests: ublk: Use ARRAY_SIZE() macro to improve code
md: fix sync_action incorrect display during resync
md: add helper rdev_needs_recovery()
md: keep recovery_cp in mdp_superblock_s
md: add legacy_async_del_gendisk mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All fixes in drivers. The largest diffstat in ufs is caused by the doc
update with the next being the qcom null pointer deref fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: ufs-qcom: Fix ESI null pointer dereference
scsi: ufs: core: Rename ufshcd_wait_for_doorbell_clr()
scsi: ufs: core: Fix the return value documentation
scsi: ufs: core: Remove WARN_ON_ONCE() call from ufshcd_uic_cmd_compl()
scsi: ufs: core: Fix IRQ lock inversion for the SCSI host lock
scsi: qla4xxx: Prevent a potential error pointer dereference
scsi: ufs: ufs-pci: Add support for Intel Wildcat Lake
scsi: fnic: Remove a useless struct mempool forward declaration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC host:
- sdhci_am654: Disable HS400 for AM62P SR1.0 and SR1.1
- sdhci-of-arasan: Ensure CD logic stabilization before power-up
- sdhci-pci-gli: Mask the replay timer timeout of AER for GL9763e
MEMSTICK:
- Fix deadlock by moving removing flag earlier"
* tag 'mmc-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci_am654: Disable HS400 for AM62P SR1.0 and SR1.1
memstick: Fix deadlock by moving removing flag earlier
mmc: sdhci-of-arasan: Ensure CD logic stabilization before power-up
mmc: sdhci-pci-gli: GL9763e: Mask the replay timer timeout of AER
mmc: sdhci-pci-gli: GL9763e: Rename the gli_set_gl9763e() for consistency
mmc: sdhci-pci-gli: Add a new function to simplify the code
|
|
Pull rdma fixes from Jason Gunthorpe:
- syzkaller found a WARN_ON in rxe due to poor lifecycle management of
resources linked to skbs
- Missing error path handling in erdma qp creation
- Initialize the qp number for the GSI QP in erdma
- Mismatching of DIP, SCC and QP numbers in hns
- SRQ bug fixes in bnxt_re
- Memory leak and possibly uninited memory in bnxt_re
- Remove retired irdma maintainer
- Fix kfree() for kvalloc() in ODP
- Fix memory leak in hns
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hns: Fix dip entries leak on devices newer than hip09
RDMA/core: Free pfn_list with appropriate kvfree call
MAINTAINERS: Remove bouncing irdma maintainer
RDMA/bnxt_re: Fix to initialize the PBL array
RDMA/bnxt_re: Fix a possible memory leak in the driver
RDMA/bnxt_re: Fix to remove workload check in SRQ limit path
RDMA/bnxt_re: Fix to do SRQ armena by default
RDMA/hns: Fix querying wrong SCC context for DIP algorithm
RDMA/erdma: Fix unset QPN of GSI QP
RDMA/erdma: Fix ignored return value of init_kernel_qp
RDMA/rxe: Flush delayed SKBs while releasing RXE resources
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- AMD-Vi: Fix potential stack buffer overflow via command line
- NVidia-Tegra: Fix endianess sparse warning
- ARM-SMMU: Fix ATS-masters reference count issue
- Virtio-IOMMU: Fix race condition on instance lookup
- RISC-V IOMMU: Fix potential NULL-ptr dereference in
riscv_iommu_iova_to_phys()
* tag 'iommu-fixes-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/riscv: prevent NULL deref in iova_to_phys
iommu/virtio: Make instance lookup robust
iommu/arm-smmu-v3: Fix smmu_domain->nr_ats_masters decrement
iommu/tegra241-cmdqv: Fix missing cpu_to_le64 at lvcmdq_err_map
iommu/amd: Avoid stack buffer overflow from kernel cmdline
|
|
The riscv_iommu_pte_fetch() function returns either NULL for
unmapped/never-mapped iova, or a valid leaf pte pointer that
requires no further validation.
riscv_iommu_iova_to_phys() failed to handle NULL returns.
Prevent null pointer dereference in
riscv_iommu_iova_to_phys(), and remove the pte validation.
Fixes: 488ffbf18171 ("iommu/riscv: Paging domain support")
Cc: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: XianLiang Huang <huangxianliang@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250820072248.312-1-huangxianliang@lanxincomputing.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Much like arm-smmu in commit 7d835134d4e1 ("iommu/arm-smmu: Make
instance lookup robust"), virtio-iommu appears to have the same issue
where iommu_device_register() makes the IOMMU instance visible to other
API callers (including itself) straight away, but internally the
instance isn't ready to recognise itself for viommu_probe_device() to
work correctly until after viommu_probe() has returned. This matters a
lot more now that bus_iommu_probe() has the DT/VIOT knowledge to probe
client devices the way that was always intended. Tweak the lookup and
initialisation in much the same way as for arm-smmu, to ensure that what
we register is functional and ready to go.
Cc: stable@vger.kernel.org
Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/308911aaa1f5be32a3a709996c7bd6cf71d30f33.1755190036.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The arm_smmu_attach_commit() updates master->ats_enabled before calling
arm_smmu_remove_master_domain() that is supposed to clean up everything
in the old domain, including the old domain's nr_ats_masters. So, it is
supposed to use the old ats_enabled state of the device, not an updated
state.
This isn't a problem if switching between two domains where:
- old ats_enabled = false; new ats_enabled = false
- old ats_enabled = true; new ats_enabled = true
but can fail cases where:
- old ats_enabled = false; new ats_enabled = true
(old domain should keep the counter but incorrectly decreased it)
- old ats_enabled = true; new ats_enabled = false
(old domain needed to decrease the counter but incorrectly missed it)
Update master->ats_enabled after arm_smmu_remove_master_domain() to fix
this.
Fixes: 7497f4211f4f ("iommu/arm-smmu-v3: Make changing domains be hitless for ATS")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Link: https://lore.kernel.org/r/20250801030127.2006979-1-nicolinc@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes that came in during the past week, a few
driver specifics plus one fix for the spi-mem core where we weren't
taking account of the frequency capabilities of the system when
determining if it can support an operation"
* tag 'spi-fix-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: st: fix PM macros to use CONFIG_PM instead of CONFIG_PM_SLEEP
spi: spi-qpic-snand: fix calculating of ECC OOB regions' properties
spi: spi-fsl-lpspi: Clamp too high speed_hz
spi: spi-mem: add spi_mem_adjust_op_freq() in spi_mem_supports_op()
spi: spi-mem: Add missing kdoc argument
spi: spi-qpic-snand: use correct CW_PER_PAGE value for OOB write
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fairly minor device specific fixes that came in over the
past week or so, plus the addition of an actual maintainer for the
IR38060"
* tag 'regulator-fix-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: tps65219: regulator: tps65219: Fix error codes in probe()
regulator: pca9450: Use devm_register_sys_off_handler
regulator: dt-bindings: infineon,ir38060: Add Guenter as maintainer from IBM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix three new issues in the ACPI APEI error injection code and
an ACPI platform firmware runtime update interface issue:
- Make ACPI APEI error injection check the version of the request
when mapping the EINJ parameter structure in the BIOS reserved
memory to prevent injecting errors based on an uninitialized
field (Tony Luck)
- Fix potential NULL dereference in __einj_error_inject() that may
occur when memory allocation fails (Charles Han)
- Remove the __exit annotation from einj_remove(), so it can be
called on errors during faux device probe (Uwe Kleine-König)
- Use a security-version-number check instead of a runtime version
check during ACPI platform firmware runtime driver updates to
prevent those updates from failing due to false-positive driver
version check failures (Chen Yu)"
* tag 'acpi-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: pfr_update: Fix the driver update version check
ACPI: APEI: EINJ: Fix resource leak by remove callback in .exit.text
ACPI: APEI: EINJ: fix potential NULL dereference in __einj_error_inject()
ACPI: APEI: EINJ: Check if user asked for EINJV2 injection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a cpuidle menu governor issue and two issues in the cpupower
utility:
- Prevent the menu cpuidle governor from selecting idle states with
exit latency exceeding the current PM QoS limit after stopping the
scheduler tick (Rafael Wysocki)
- Make the set subcommand's -t option in the cpupower utility work as
documented and allow it to control the CPU boost feature of cpufreq
beyond x86 (Shinji Nomoto)"
* tag 'pm-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: governors: menu: Avoid selecting states with too much latency
cpupower: Allow control of boost feature on non-x86 based systems with boost support.
cpupower: Fix a bug where the -t option of the set subcommand was not working.
|
|
If the argument check during an array bind fails, the bind_ops are freed
twice as seen below. Fix this by setting bind_ops to NULL after freeing.
==================================================================
BUG: KASAN: double-free in xe_vm_bind_ioctl+0x1b2/0x21f0 [xe]
Free of addr ffff88813bb9b800 by task xe_vm/14198
CPU: 5 UID: 0 PID: 14198 Comm: xe_vm Not tainted 6.16.0-xe-eudebug-cmanszew+ #520 PREEMPT(full)
Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR5 RVP, BIOS ADLPFWI1.R00.2411.A02.2110081023 10/08/2021
Call Trace:
<TASK>
dump_stack_lvl+0x82/0xd0
print_report+0xcb/0x610
? __virt_addr_valid+0x19a/0x300
? xe_vm_bind_ioctl+0x1b2/0x21f0 [xe]
kasan_report_invalid_free+0xc8/0xf0
? xe_vm_bind_ioctl+0x1b2/0x21f0 [xe]
? xe_vm_bind_ioctl+0x1b2/0x21f0 [xe]
check_slab_allocation+0x102/0x130
kfree+0x10d/0x440
? should_fail_ex+0x57/0x2f0
? xe_vm_bind_ioctl+0x1b2/0x21f0 [xe]
xe_vm_bind_ioctl+0x1b2/0x21f0 [xe]
? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
? __lock_acquire+0xab9/0x27f0
? lock_acquire+0x165/0x300
? drm_dev_enter+0x53/0xe0 [drm]
? find_held_lock+0x2b/0x80
? drm_dev_exit+0x30/0x50 [drm]
? drm_ioctl_kernel+0x128/0x1c0 [drm]
drm_ioctl_kernel+0x128/0x1c0 [drm]
? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
? find_held_lock+0x2b/0x80
? __pfx_drm_ioctl_kernel+0x10/0x10 [drm]
? should_fail_ex+0x57/0x2f0
? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
drm_ioctl+0x352/0x620 [drm]
? __pfx_drm_ioctl+0x10/0x10 [drm]
? __pfx_rpm_resume+0x10/0x10
? do_raw_spin_lock+0x11a/0x1b0
? find_held_lock+0x2b/0x80
? __pm_runtime_resume+0x61/0xc0
? rcu_is_watching+0x20/0x50
? trace_irq_enable.constprop.0+0xac/0xe0
xe_drm_ioctl+0x91/0xc0 [xe]
__x64_sys_ioctl+0xb2/0x100
? rcu_is_watching+0x20/0x50
do_syscall_64+0x68/0x2e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fa9acb24ded
Fixes: b43e864af0d4 ("drm/xe/uapi: Add DRM_XE_VM_BIND_FLAG_CPU_ADDR_MIRROR")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Christoph Manszewski <christoph.manszewski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250813101231.196632-2-christoph.manszewski@intel.com
(cherry picked from commit a01b704527c28a2fd43a17a85f8996b75ec8492a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently, ASID assignment for user VMs and page-table BO accounting for
client memory tracking are performed in xe_vm_create_ioctl.
To consolidate VM object initialization, move this logic to
xe_vm_create.
v2:
- removed unnecessary duplicate BO tracking code
- using the local variable xef to verify whether the VM is being created
by userspace
Fixes: 658a1c8e0a66 ("drm/xe: Assign ioctl xe file handler to vm in xe_vm_create")
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250811104358.2064150-3-piotr.piorkowski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit 30e0c3f43a414616e0b6ca76cf7f7b2cd387e1d4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo: Added fixes tag]
|
|
Merge ACPI APEI fixes and an ACPI platform firmware runtime update fix
for 6.17-rc3.
* acpi-apei:
ACPI: APEI: EINJ: Fix resource leak by remove callback in .exit.text
ACPI: APEI: EINJ: fix potential NULL dereference in __einj_error_inject()
ACPI: APEI: EINJ: Check if user asked for EINJV2 injection
* acpi-pfrut:
ACPI: pfr_update: Fix the driver update version check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth.
Current release - fix to a fix:
- usb: asix_devices: fix PHY address mask in MDIO bus initialization
Current release - regressions:
- Bluetooth: fixes for the split between BIS_LINK and PA_LINK
- Revert "net: cadence: macb: sama7g5_emac: Remove USARIO CLKEN
flag", breaks compatibility with some existing device tree blobs
- dsa: b53: fix reserved register access in b53_fdb_dump()
Current release - new code bugs:
- sched: dualpi2: run probability update timer in BH to avoid
deadlock
- eth: libwx: fix the size in RSS hash key population
- pse-pd: pd692x0: improve power budget error paths and handling
Previous releases - regressions:
- tls: fix handling of zero-length records on the rx_list
- hsr: reject HSR frame if skb can't hold tag
- bonding: fix negotiation flapping in 802.3ad passive mode
Previous releases - always broken:
- gso: forbid IPv6 TSO with extensions on devices with only IPV6_CSUM
- sched: make cake_enqueue return NET_XMIT_CN when past buffer_limit,
avoid packet drops with low buffer_limit, remove unnecessary WARN()
- sched: fix backlog accounting after modifying config of a qdisc in
the middle of the hierarchy
- mptcp: improve handling of skb extension allocation failures
- eth: mlx5:
- fixes for the "HW Steering" flow management method
- fixes for QoS and device buffer management"
* tag 'net-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
netfilter: nf_reject: don't leak dst refcount for loopback packets
net/mlx5e: Preserve shared buffer capacity during headroom updates
net/mlx5e: Query FW for buffer ownership
net/mlx5: Restore missing scheduling node cleanup on vport enable failure
net/mlx5: Fix QoS reference leak in vport enable error path
net/mlx5: Destroy vport QoS element when no configuration remains
net/mlx5e: Preserve tc-bw during parent changes
net/mlx5: Remove default QoS group and attach vports directly to root TSAR
net/mlx5: Base ECVF devlink port attrs from 0
net: pse-pd: pd692x0: Skip power budget configuration when undefined
net: pse-pd: pd692x0: Fix power budget leak in manager setup error path
Octeontx2-af: Skip overlap check for SPI field
selftests: tls: add tests for zero-length records
tls: fix handling of zero-length records on the rx_list
net: airoha: ppe: Do not invalid PPE entries in case of SW hash collision
selftests: bonding: add test for passive LACP mode
bonding: send LACPDUs periodically in passive mode after receiving partner's LACPDU
bonding: update LACP activity flag after setting lacp_active
Revert "net: cadence: macb: sama7g5_emac: Remove USARIO CLKEN flag"
ipv6: sr: Fix MAC comparison to be constant-time
...
|
|
When port buffer headroom changes, port_update_shared_buffer()
recalculates the shared buffer size and splits it in a 3:1 ratio
(lossy:lossless) - Currently, the calculation is:
lossless = shared / 4;
lossy = (shared / 4) * 3;
Meaning, the calculation dropped the remainder of shared % 4 due to
integer division, unintentionally reducing the total shared buffer
by up to three cells on each update. Over time, this could shrink
the buffer below usable size.
Fix it by changing the calculation to:
lossless = shared / 4;
lossy = shared - lossless;
This retains all buffer cells while still approximating the
intended 3:1 split, preventing capacity loss over time.
While at it, perform headroom calculations in units of cells rather than
in bytes for more accurate calculations avoiding extra divisions.
Fixes: a440030d8946 ("net/mlx5e: Update shared buffer along with device buffer changes")
Signed-off-by: Armen Ratner <armeng@nvidia.com>
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20250820133209.389065-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The SW currently saves local buffer ownership when setting
the buffer.
This means that the SW assumes it has ownership of the buffer
after the command is set.
If setting the buffer fails and we remain in FW ownership,
the local buffer ownership state incorrectly remains as SW-owned.
This leads to incorrect behavior in subsequent PFC commands,
causing failures.
Instead of saving local buffer ownership in SW,
query the FW for buffer ownership when setting the buffer.
This ensures that the buffer ownership state is accurately
reflected, avoiding the issues caused by incorrect ownership
states.
Fixes: ecdf2dadee8e ("net/mlx5e: Receive buffer support for DCBX")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250820133209.389065-8-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Restore the __esw_qos_free_node() call removed by the offending commit.
Fixes: 97733d1e00a0 ("net/mlx5: Add traffic class scheduling support for vport QoS")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250820133209.389065-7-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing esw_qos_put() call when __esw_qos_alloc_node() fails in
mlx5_esw_qos_vport_enable().
Fixes: be034baba83e ("net/mlx5: Make vport QoS enablement more flexible for future extensions")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250820133209.389065-6-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a VF has been configured and the user later clears all QoS settings,
the vport element remains in the firmware QoS tree. This leads to
inconsistent behavior compared to VFs that were never configured, since
the FW assumes that unconfigured VFs are outside the QoS hierarchy.
As a result, the bandwidth share across VFs may differ, even though
none of them appear to have any configuration.
Align the driver behavior with the FW expectation by destroying the
vport QoS element when all configurations are removed.
Fixes: c9497c98901c ("net/mlx5: Add support for setting VF min rate")
Fixes: cf7e73770d1b ("net/mlx5: Manage TC arbiter nodes and implement full support for tc-bw")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20250820133209.389065-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When changing parent of a node/leaf with tc-bw configured, the code
saves and restores tc-bw values. However, it was reading the converted
hardware bw_share values (where 0 becomes 1) instead of the original
user values, causing incorrect tc-bw calculations after parent change.
Store original tc-bw values in the node structure and use them directly
for save/restore operations.
Fixes: cf7e73770d1b ("net/mlx5: Manage TC arbiter nodes and implement full support for tc-bw")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250820133209.389065-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the driver creates a default group (`node0`) and attaches
all vports to it unless the user explicitly sets a parent group. As a
result, when a user configures tx_share on a group and tx_share on
a VF, the expectation is for the group and the VF to share bandwidth
relatively. However, since the VF is not connected to the same parent
(but to the default node), the proportional share logic is not applied
correctly.
To fix this, remove the default group (`node0`) and instead connect
vports directly to the root TSAR when no parent is specified. This
ensures that vports and groups share the same root scheduler and their
tx_share values are compared directly under the same hierarchy.
Fixes: 0fe132eac38c ("net/mlx5: E-switch, Allow to add vports to rate groups")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250820133209.389065-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adjust the vport number by the base ECVF vport number so the port
attributes start at 0. Previously the port attributes would start 1
after the maximum number of host VFs.
Fixes: dc13180824b7 ("net/mlx5: Enable devlink port for embedded cpu VF vports")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250820133209.389065-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the power supply's power budget is not defined in the device tree,
the current code still requests power and configures the PSE manager
with a 0W power limit, which is undesirable behavior.
Skip power budget configuration entirely when the budget is zero,
avoiding unnecessary power requests and preventing invalid 0W limits
from being set on the PSE manager.
Fixes: 359754013e6a ("net: pse-pd: pd692x0: Add support for PSE PI priority feature")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250820133321.841054-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix a resource leak where manager power budgets were freed on both
success and error paths during manager setup. Power budgets should
only be freed on error paths after regulator registration or during
driver removal.
Refactor cleanup logic by extracting OF node cleanup and power budget
freeing into separate helper functions for better maintainability.
Fixes: 359754013e6a ("net: pse-pd: pd692x0: Add support for PSE PI priority feature")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250820132708.837255-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Octeontx2/CN10K silicon supports generating a 256-bit key per packet.
The specific fields to be extracted from a packet for key generation
are configurable via a Key Extraction (MKEX) Profile.
The AF driver scans the configured extraction profile to ensure that
fields from upper layers do not overwrite fields from lower layers in
the key.
Example Packet Field Layout:
LA: DMAC + SMAC
LB: VLAN
LC: IPv4/IPv6
LD: TCP/UDP
Valid MKEX Profile Configuration:
LA -> DMAC -> key_offset[0-5]
LC -> SIP -> key_offset[20-23]
LD -> SPORT -> key_offset[30-31]
Invalid MKEX profile configuration:
LA -> DMAC -> key_offset[0-5]
LC -> SIP -> key_offset[20-23]
LD -> SPORT -> key_offset[2-3] // Overlaps with DMAC field
In another scenario, if the MKEX profile is configured to extract
the SPI field from both AH and ESP headers at the same key offset,
the driver rejecting this configuration. In a regular traffic,
ipsec packet will be having either AH(LD) or ESP (LE). This patch
relaxes the check for the same.
Fixes: 12aa0a3b93f3 ("octeontx2-af: Harden rule validation.")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250820063919.1463518-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pm_sleep_ptr() depends on CONFIG_PM_SLEEP while pm_ptr() depends on
CONFIG_PM. Since ST SSC4 implements runtime PM it makes sense using
pm_ptr() here.
For the same reason replace PM macros that use CONFIG_PM. Doing so
prevents from using __maybe_unused attribute of runtime PM functions.
Link: https://lore.kernel.org/lkml/CAMuHMdX9nkROkAJJ5odv4qOWe0bFTmaFs=Rfxsfuc9+DT-bsEQ@mail.gmail.com
Fixes: 6f8584a4826f ("spi: st: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()")
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250820180310.9605-1-rgallaispou@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SW hash computed by airoha_ppe_foe_get_entry_hash routine (used for
foe_flow hlist) can theoretically produce collisions between two
different HW PPE entries.
In airoha_ppe_foe_insert_entry() if the collision occurs we will mark
the second PPE entry in the list as stale (setting the hw hash to 0xffff).
Stale entries are no more updated in airoha_ppe_foe_flow_entry_update
routine and so they are removed by Netfilter.
Fix the problem not marking the second entry as stale in
airoha_ppe_foe_insert_entry routine if we have already inserted the
brand new entry in the PPE table and let Netfilter remove real stale
entries according to their timestamp.
Please note this is just a theoretical issue spotted reviewing the code
and not faced running the system.
Fixes: cd53f622611f9 ("net: airoha: Add L2 hw acceleration support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250818-airoha-en7581-hash-collision-fix-v1-1-d190c4b53d1c@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This adds SDHCI_AM654_QUIRK_DISABLE_HS400 quirk which shall be used
to disable HS400 support. AM62P SR1.0 and SR1.1 do not support HS400
due to errata i2458 [0] so disable HS400 for these SoC revisions.
[0] https://www.ti.com/lit/er/sprz574a/sprz574a.pdf
Fixes: 37f28165518f ("arm64: dts: ti: k3-am62p: Add ITAP/OTAP values for MMC")
Cc: stable@vger.kernel.org
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250820193047.4064142-1-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
LACPDU
When `lacp_active` is set to `off`, the bond operates in passive mode, meaning
it only "speaks when spoken to." However, the current kernel implementation
only sends an LACPDU in response when the partner's state changes.
As a result, once LACP negotiation succeeds, the actor stops sending LACPDUs
until the partner times out and sends an "expired" LACPDU. This causes
continuous LACP state flapping.
According to IEEE 802.1AX-2014, 6.4.13 Periodic Transmission machine. The
values of Partner_Oper_Port_State.LACP_Activity and
Actor_Oper_Port_State.LACP_Activity determine whether periodic transmissions
take place. If either or both parameters are set to Active LACP, then periodic
transmissions occur; if both are set to Passive LACP, then periodic
transmissions do not occur.
To comply with this, we remove the `!bond->params.lacp_active` check in
`ad_periodic_machine()`. Instead, we initialize the actor's port's
`LACP_STATE_LACP_ACTIVITY` state based on `lacp_active` setting.
Additionally, we avoid setting the partner's state to
`LACP_STATE_LACP_ACTIVITY` in the EXPIRED state, since we should not assume
the partner is active by default.
This ensures that in passive mode, the bond starts sending periodic LACPDUs
after receiving one from the partner, and avoids flapping due to inactivity.
Fixes: 3a755cd8b7c6 ("bonding: add new option lacp_active")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250815062000.22220-3-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The port's actor_oper_port_state activity flag should be updated immediately
after changing the lacp_active option to reflect the current mode correctly.
Fixes: 3a755cd8b7c6 ("bonding: add new option lacp_active")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250815062000.22220-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.17-2025-08-20:
amdgpu:
- Replay fixes
- SMU14 fix
- Null check DC fixes
- DCE6 DC fixes
- Misc DC fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250820194636.101975-1-alexander.deucher@amd.com
|
|
This reverts commit db400061b5e7cc55f9b4dd15443e9838964119ea.
This commit can cause a Devicetree ABI break for older DTS files that rely this
flag for RMII configuration. Adding this back in ensures that the older
DTBs will not break.
Fixes: db400061b5e7 ("net: cadence: macb: sama7g5_emac: Remove USARIO CLKEN flag")
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://patch.msgid.link/20250819163236.100680-1-Ryan.Wanner@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ksz9477_hsr_join() is called once to setup the HSR port membership, but
the port can be enabled later, or disabled and enabled back and the port
membership is not set correctly inside ksz_update_port_member(). The
added code always use the correct HSR port membership for HSR port that
is enabled.
Fixes: 2d61298fdd7b ("net: dsa: microchip: Enable HSR offloading for KSZ9477")
Reported-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Łukasz Majewski <lukma@nabladev.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://patch.msgid.link/20250819010457.563286-1-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Device ID comparison in igc_is_device_id_i226 is performed before
the ID is set, resulting in always failing check on init.
Before the patch:
* L1.2 is not disabled on init
* L1.2 is properly disabled after suspend-resume cycle
With the patch:
* L1.2 is properly disabled both on init and after suspend-resume
How to test:
Connect to the 1G link with 300+ mbit/s Internet speed, and run
the download speed test, such as:
curl -o /dev/null http://speedtest.selectel.ru/1GB
Without L1.2 disabled, the speed would be no more than ~200 mbit/s.
With L1.2 disabled, the speed would reach 1 gbit/s.
Note: it's required that the latency between your host and the remote
be around 3-5 ms, the test inside LAN (<1 ms latency) won't trigger the
issue.
Link: https://lore.kernel.org/intel-wired-lan/15248b4f-3271-42dd-8e35-02bfc92b25e1@intel.com
Fixes: 0325143b59c6 ("igc: disable L1.2 PCI-E link substate to avoid performance issue")
Signed-off-by: ValdikSS <iam@valdikss.org.ru>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250819222000.3504873-6-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently ixgbe driver checks periodically in its watchdog subtask if
there is anything to be transmitted (considering both Tx and XDP rings)
under state of carrier not being 'ok'. Such event is interpreted as Tx
hang and therefore results in interface reset.
This is currently problematic for ndo_xdp_xmit() as it is allowed to
produce descriptors when interface is going through reset or its carrier
is turned off.
Furthermore, XDP rings should not really be objects of Tx hang
detection. This mechanism is rather a matter of ndo_tx_timeout() being
called from dev_watchdog against Tx rings exposed to networking stack.
Taking into account issues described above, let us have a two fold fix -
do not respect XDP rings in local ixgbe watchdog and do not produce Tx
descriptors in ndo_xdp_xmit callback when there is some problem with
carrier currently. For now, keep the Tx hang checks in clean Tx irq
routine, but adjust it to not execute for XDP rings.
Cc: Tobias Böhm <tobias.boehm@hetzner-cloud.de>
Reported-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de>
Closes: https://lore.kernel.org/netdev/eca1880f-253a-4955-afe6-732d7c6926ee@hetzner-cloud.de/
Fixes: 6453073987ba ("ixgbe: add initial support for xdp redirect")
Fixes: 33fdc82f0883 ("ixgbe: add support for XDP_TX action")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250819222000.3504873-5-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Resolve the budget negative overflow which leads to returning true in
ixgbe_xmit_zc even when the budget of descs are thoroughly consumed.
Before this patch, when the budget is decreased to zero and finishes
sending the last allowed desc in ixgbe_xmit_zc, it will always turn back
and enter into the while() statement to see if it should keep processing
packets, but in the meantime it unexpectedly decreases the value again to
'unsigned int (0--)', namely, UINT_MAX. Finally, the ixgbe_xmit_zc returns
true, showing 'we complete cleaning the budget'. That also means
'clean_complete = true' in ixgbe_poll.
The true theory behind this is if that budget number of descs are consumed,
it implies that we might have more descs to be done. So we should return
false in ixgbe_xmit_zc to tell napi poll to find another chance to start
polling to handle the rest of descs. On the contrary, returning true here
means job done and we know we finish all the possible descs this time and
we don't intend to start a new napi poll.
It is apparently against our expectations. Please also see how
ixgbe_clean_tx_irq() handles the problem: it uses do..while() statement
to make sure the budget can be decreased to zero at most and the negative
overflow never happens.
The patch adds 'likely' because we rarely would not hit the loop condition
since the standard budget is 256.
Fixes: 8221c5eba8c1 ("ixgbe: add AF_XDP zero-copy Tx support")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Priya Singh <priyax.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250819222000.3504873-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Remove vmd restriction on children using MSI-X because VMD does in
fact support both MSI and MSI-X for children (Nam Cao)
- Fix a NULL pointer dereference in the xilinx interrupt handler (Nam
Cao)
* tag 'pci-v6.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: vmd: Remove MSI-X check on child devices
PCI: xilinx: Fix NULL pointer dereference in xilinx_pcie_intr_handler()
|
|
Tracing code called by the SCLP interrupt handler contains early exits
if the SCCB address associated with an interrupt is NULL. This check is
performed after physical to virtual address translation.
If the kernel identity mapping does not start at address zero, the
resulting virtual address is never zero, so that the NULL checks won't
work. Subsequently this may result in incorrect accesses to the first
page of the identity mapping.
Fix this by introducing a function that handles the NULL case before
address translation.
Fixes: ada1da31ce34 ("s390/sclp: sort out physical vs virtual pointers usage")
Cc: stable@vger.kernel.org
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
