summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-01-15korina: rework korina_rx() for use with napiPhil Sutter
This function needs an early exit condition to function properly, or else caller assumes napi workload wasn't enough to handle all received packets and korina_rx is called again (and again and again and ...). Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15korina: disable napi on close and restartPhil Sutter
Without this the driver will crash when the NIC is being restarted. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15korina: reset resource buffer size to 1536Phil Sutter
The new value is the one used in the external patch before and allows at least a standard MTU of 1500 to be handled correctly. Impact of this change gets visible when bigger packets are to be received, issuing: | ping -s 492 <IP> and bigger payload sized led to 100% packet loss. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15korina: fix usage of driver_dataPhil Sutter
Using platform_set_drvdata() here makes no sense, since the driver_data field has already been filled with valuable data (i.e. the MAC address). Also having driver_data point to the net_device is rather pointless since struct korina_device contains an apropriate field for it. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: First slow path interrupt raceEilon Greenstein
The "read for interrupts" flag must be set before enabling slow-path interrupts as well (and not just before fast-path interrupts) Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: MTU FilterEilon Greenstein
Too big packets could pass due to wrong filter size Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: Indirection table initialization indexEilon Greenstein
Wrong initialization of the multi-queue indirection table - it should be using the function and not the port index Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: Missing bracketsEilon Greenstein
Calculation bug due to missing brackets Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: Fixing the doorbell sizeEilon Greenstein
The size of the doorbell is 4KB, this bug become visible when using more than 8 queues Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: Endianness issuesEilon Greenstein
Adding missing le_to_cpu and disabling wrong HW endianity flag (the two complete each other) Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: VLAN tagged packets without VLAN offloadEilon Greenstein
Wrong handling of tagged packet if VLAN offload is disabled caused packets to get corrupted Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: Protecting the link change indicationEilon Greenstein
Without this lock, in some race conditions the driver missed link change indication Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: Flow control updated before reporting the linkEilon Greenstein
Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: Missing mask when calculating flow controlEilon Greenstein
Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: Using system page size for SGEEilon Greenstein
When the page size is not 4KB, the FW must be programmed to work with the right SGE boundaries and fragment list length. To avoid confusion with the BCM_PAGE_SIZE which is set to 4KB for the FW sake, another alias for the system page size was added to explicitly indicate that it is meant for the SGE Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: Missing memory barriersEilon Greenstein
While working on IA64, it became clear that the following memory barriers are missing Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: Using singlethread work queueEilon Greenstein
Since slow-path events, including link update, are handled in work-queue, a race condition was introduced in the self-test that sometimes caused the link status to fail: the self-test was running under RTNL lock, and if the link-watch was scheduled it stoped the shared work-queue (waiting for the RTNL lock) and so the link update event was not handled until the self-test ended (releasing the RTNL lock) with failure (since the link status was not updated) Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15ARM: OMAP: Fix gpio by switching to generic gpio calls, v2Jarkko Nikula
Fix compile by removing remaining omap specific gpio calls. Based on earlier patches by Jarkko Nikula. Also remove old GPIO key code, there is already a patch to do this with gpio_keys. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-01-15mfd: Remove non exported references from pcf50633Balaji Rao
Remove references to set_irq_type and handle_level_irq which are not exported to modules Signed-off-by: Balaji Rao <balajirrao@openmoko.org> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-14IPoIB: Fix deadlock between ipoib_open() and child interface createRoland Dreier
Fix a deadlock between child interface creation/deletion and ipoib start/stop. The former takes vlan_mutex, and then might take RTNL via register_netdev()/unregister_netdev(). The latter is executed with RTNL held, and tries to take vlan_mutex, which can lead to an AB-BA deadlock. Fix this by having the child interface creation/deletion code take the RTNL first so vlan_mutex always nests inside RTNL. We can use register_netdevice() for child interfaces because we form the interface name from the parent interface and hence don't need the '%' expansion of register_netdev(). Reported-by: Yossi Etigin <yosefe@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-14fsldma: check for NO_IRQ in fsl_dma_chan_remove()Peter Korsgaard
There's no per-channel IRQ on mpc83xx, so only call free_irq if we have one. Acked-by: Timur Tabi <timur@freescale.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-14ax88796: start_xmit fix using net_device_opsMagnus Damm
This patch hooks up the start_xmit/tx_timeout/get_stats callbacks in the ax88796 driver since they no longer are installed by the lib8390 code. Without this patch the function dev_hard_start_xmit() crashes due to a start_xmit callback with the value NULL. While at it, update the ax88796 driver to make use of use of struct net_device_ops. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14net: Add init_dummy_netdev() and fix EMAC driver using itBenjamin Herrenschmidt
This adds an init_dummy_netdev() function that gets a network device structure (allocation and lifetime entirely under caller's control) and initialize the minimum amount of fields so it can be used to schedule NAPI polls without registering a full blown interface. This is to be used by drivers that need to tie several hardware interfaces to a single NAPI poll scheduler due to HW limitations. It also updates the ibm_newemac driver to use that, this fixing the oops on 2.6.29 due to passing NULL as "dev" to netif_napi_add() Symbol is exported GPL only a I don't think we want binary drivers doing that sort of acrobatics (if we want them at all). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14drivers/net/irda/irda-usb.c: fix buffer overflowJos-Vicente Gilabert
Taken from http://bugzilla.kernel.org/show_bug.cgi?id=12397 We're doing an sprintf of an 11-char string into an 11-char buffer. Whoops. It breaks firmware uploading. Reported-by: Jos-Vicente Gilabert <josevteg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14netxen: handle dma mapping failuresDhananjay Phadke
o Bail out if pci_map_single() fails while replenishing rx ring. o Drop packet if pci_map_{single,page}() fail in tx. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14netxen: hold tx lock while sending firmware commandsDhananjay Phadke
Some firmware commands like mac address addition/deletion are sent on the transmit ring. So need to hold the tx lock before touching tx producer/consumer indices. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14netxen: cleanup mac list on driver unloadDhananjay Phadke
This fixes a tiny memory leak when driver is unloaded. The mac address list maintained in netxen_adapter needs to deleted when driver is going down. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14netxen: firmware init fixDhananjay Phadke
o Fix order or rom register writes. o Reduce udelays when writing rom registers. This cuts the firmware init time by 40%. o Do not reset core/memory clocks when reinitializing driver. Firmware willl handle this when initialized. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14netxen: fix link speed reporting for some boardsDhananjay Phadke
o Read negotiated link speed when link state changes. o Fix link speed reporting for hybrid nic boards, which have both 1Gbps and 10Gbps ports. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14netxen: fix ipv6 offload and tx cleanupDhananjay Phadke
o fix the ip/tcp hdr offset in tx descriptors for ipv6. o cleanup xmit function, move the tso checks into separate function, this reduces unnecessary endian conversions back and forth. o optimize macros to initialize tx descriptors. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14netxen: fix endianness in firmware commandsDhananjay Phadke
o Set restricted (little endian) data types in firmware command requests and responses. o Remove unnecessary conversion to LE when writing registers. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14sis900: generate fake MAC address if the hardware doesn't have oneDaniele Venzano
The attached patch modifies the sis900 driver when the MAC address read from the hardware is invalid. As suggested, the patch now generates a random address so that the user can go on and use the hardware. In any case a message is also shown to warn on the unexpected condition. This seems to happen with newer HW implementation of the sis900 chipset, since this never came up before. Patch is against vanilla 2.6.28 (but the driver doesn't change so often, so it will probably apply to older/newer versions too). See bugzilla ID 10201 and 11649 and ignore the previous patch. Signed-off-by: Daniele Venzano <venza@brownhat.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14powerpc/fs_enet: Add missing irq free in error path.Mike Ditto
If something goes wrong attaching to phy driver, we weren't freeing the IRQ. Signed-off-by: Mike Ditto <mditto@consentry.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (29 commits) powerpc/83xx: Move mcu_mpc8349emitx driver out of drivers/i2c/chips/ powerpc/83xx: Make serial ports work on MPC8315E-RDB w/ FSL U-Boots powerpc/e500mc: Doorbells need to be taken w/exceptions disabled powerpc: Enable PS3 options and QPACE in ppc64_defconfig powerpc/powermac: Fix occasional SMP boot failure powerpc/cacheinfo: Rename cache_dir per-cpu variable hvc_console: Use kzalloc() instead of kmalloc() + memset() hvc_console: Do not set low_latency when using interrupts hvc_console: Call free_irq() only if request_irq() was successful hvc_console: Change an mb() to smp_mb() and add some comments powerpc: Cleanup from l64 to ll64 change: drivers/net powerpc: Cleanup from l64 to ll64 change: drivers/char powerpc: Cleanup from l64 to ll64 change: arch code powerpc: Change u64/s64 to a long long integer type powerpc/kexec: Check crash_base for relocatable kernel powerpc: Make dummy section a valid note header Xilinx: SPI: updated driver for device tree drivers/of: Add the of_find_i2c_device_by_node function. powerpc/xsysace: add compatible string for non-ipcore instance powerpc/mpc52xx: remove dead code from GPIO driver ...
2009-01-14Merge branch 'syscalls' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'syscalls' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (44 commits) [CVE-2009-0029] s390 specific system call wrappers [CVE-2009-0029] System call wrappers part 33 [CVE-2009-0029] System call wrappers part 32 [CVE-2009-0029] System call wrappers part 31 [CVE-2009-0029] System call wrappers part 30 [CVE-2009-0029] System call wrappers part 29 [CVE-2009-0029] System call wrappers part 28 [CVE-2009-0029] System call wrappers part 27 [CVE-2009-0029] System call wrappers part 26 [CVE-2009-0029] System call wrappers part 25 [CVE-2009-0029] System call wrappers part 24 [CVE-2009-0029] System call wrappers part 23 [CVE-2009-0029] System call wrappers part 22 [CVE-2009-0029] System call wrappers part 21 [CVE-2009-0029] System call wrappers part 20 [CVE-2009-0029] System call wrappers part 19 [CVE-2009-0029] System call wrappers part 18 [CVE-2009-0029] System call wrappers part 17 [CVE-2009-0029] System call wrappers part 16 [CVE-2009-0029] System call wrappers part 15 ...
2009-01-14IPoIB: Fix hang in napi_disable() if P_Key is never foundRoland Dreier
After commit fe25c561 ("IPoIB: Don't enable NAPI when it's already enabled"), if an interface is brought up but the corresponding P_Key never appears, then ipoib_stop() will hang in napi_disable(), because ipoib_open() returns before it does napi_enable(). Fix this by changing ipoib_open() to call napi_enable() even if the P_Key isn't present. Reported-by: Yossi Etigin <yosefe@Voltaire.COM> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-14i4l: minor cleanupsPaul Bolle
Minor cleanups, either made possible or obvious after commit d700555 (I4l: convert to net_device_ops). Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14i4l: do not print a warning when shutting down an i4l ppp interfacePaul Bolle
When an i4l ppp interface is shut down (e.g. with /sbin/ifdown ippp0) a scary warning is logged: isdn_free_channel: called with invalid drv(-1) or channel(-1) This warning is caused by isdn_net_unbind_channel(), which always calls isdn_free_channel() even if isdn_net_local->isdn_device and isdn_net_local->isdn_channel are (still) in a perfectly acceptable default state, so let's not do that. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14phylib: Fix Freescale TBI PHY detectionAnton Vorontsov
Freescale on-chip TBI PHYs reports PHY ID as 0x0, but as of commit 3ee82383f0098a2e13acc8cf1be8e47512f41e5a Author: Giulio Benetti <giulio.benetti@micronovasrl.com> Date: Thu Nov 13 21:53:13 2008 +0000 phy: fix phy address bug PHYID returns 0xffff and not 0xffffffff when not found and in some case(at91sam9263) 0x0. Maybe this patch could be useful. phy_device.c treats PHY ID == 0x0 as bogus IDs, and that results in gianfar driver failure to see the TBI PHYs. This code snippet triggers: if (!priv->tbiphy) { printk(KERN_WARNING "SGMII mode requires that the device " "tree specify a tbi-handle\n"); return; } Although tbi-handle is specified in the device tree. Btw, technically PHY ID == 0x0 is a valid ID (if we ever see a PHY manufactured by Xerox :-). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14ARM etherh: Fix build failure.David S. Miller
Reported by Russell King: drivers/net/arm/etherh.c:649: error: unknown field 'ndo_set_mac_addr' specified in initializer Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14ide: fix suspend regressionBartlomiej Zolnierkiewicz
On Monday 12 January 2009, Simon Holm Thøgersen wrote: > commit 295f000 ("ide: don't execute the next queued command from the > hard-IRQ context (v2)") breaks suspend to disk for me. On > 'echo disk > /sys/power/state' the systems hangs, letting me switch > virtual consoles, but not responding to Alt+SysRq Restart the request queue early for REQ_TYPE_PM_RESUME requests (though there is only one resume request for the whole resume sequence it stays in the queue until is fully completed and now depends on kblockd for processing consequential resume states). Reported-and-bisected-by: Simon Holm Thøgersen <odie@cs.aau.dk> Tested-by: Simon Holm Thøgersen <odie@cs.aau.dk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-14tx4938ide: Fix build error due to read_sff_dma_status movingAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-14ide: remove unused CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-14sl82c105: remove dead codeBartlomiej Zolnierkiewicz
CONFIG_LOPEC and CONFIG_SANDPOINT config options are gone. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-14via82cxxx: fix cable warning messageBartlomiej Zolnierkiewicz
Remove reference to the removed old-style kernel parameter. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-14ide: can't use SSD/non-rotational queue flag for all CFA devicesBartlomiej Zolnierkiewicz
Some rotating disks also present themselves as CFA devices. Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-14it821x.c: use dev->revision instead of pci_read_config_byteBrandon Philips
Minor cleanup. Signed-off-by: Brandon Philips <bphilips@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Shawn Lin <shawn@dmp.com.tw> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-14it821x: Add ultra_mask quirk for Vortex86SXBrandon Philips
On Vortex86SX with IDE controller revision 0x11 ultra DMA must be disabled. This patch was tested by DMP and seems to work. It is a cleaned up version of their older Kernel patch: http://www.dmp.com.tw/tech/vortex86sx/patch-2.6.24-DMP.gz Tested-by: Shawn Lin <shawn@dmp.com.tw> Signed-off-by: Brandon Philips <bphilips@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-14ide: fix accidental LOCKDEP breakage caused by local_irq_set() removalBartlomiej Zolnierkiewicz
commit 54cc1428cfa619e16d75baae8cb041a2eff015f0 ("ide: remove local_irq_set() macro") accidentally replaced local_save_flags() by local_irq_set() in ide_probe_port() and __ide_wait_stat() which resulted in LOCKDEP breakage. Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-14[CVE-2009-0029] System call wrappers part 26Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
generated by cgit (git 2.34.1) at 2025-09-15 00:04:34 +0000