summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-07-20staging: comedi: addi_apci_1500: check INSN_CONFIG_DIGITAL_TRIG shiftIan Abbott
The `INSN_CONFIG` comedi instruction with sub-instruction code `INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is used as a right shift amount for other bitmask values without being checked. Shift amounts greater than or equal to 32 will result in undefined behavior. Add code to deal with this, adjusting the checks for invalid channels so that enabled channel bits that would have been lost by shifting are also checked for validity. Only channels 0 to 15 are valid. Fixes: a8c66b684efaf ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions") Cc: <stable@vger.kernel.org> #4.0+: ef75e14a6c93: staging: comedi: verify array index is correct before using it Cc: <stable@vger.kernel.org> #4.0+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200717145257.112660-5-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-20staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shiftIan Abbott
The `INSN_CONFIG` comedi instruction with sub-instruction code `INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is used as a right shift amount for other bitmask values without being checked. Shift amounts greater than or equal to 32 will result in undefined behavior. Add code to deal with this. Fixes: 33cdce6293dcc ("staging: comedi: addi_apci_1032: conform to new INSN_CONFIG_DIGITAL_TRIG") Cc: <stable@vger.kernel.org> #3.8+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200717145257.112660-3-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-20staging: comedi: ni_6527: fix INSN_CONFIG_DIGITAL_TRIG supportIan Abbott
`ni6527_intr_insn_config()` processes `INSN_CONFIG` comedi instructions for the "interrupt" subdevice. When `data[0]` is `INSN_CONFIG_DIGITAL_TRIG` it is configuring the digital trigger. When `data[2]` is `COMEDI_DIGITAL_TRIG_ENABLE_EDGES` it is configuring rising and falling edge detection for the digital trigger, using a base channel number (or shift amount) in `data[3]`, a rising edge bitmask in `data[4]` and falling edge bitmask in `data[5]`. If the base channel number (shift amount) is greater than or equal to the number of channels (24) of the digital input subdevice, there are no changes to the rising and falling edges, so the mask of channels to be changed can be set to 0, otherwise the mask of channels to be changed, and the rising and falling edge bitmasks are shifted by the base channel number before calling `ni6527_set_edge_detection()` to change the appropriate registers. Unfortunately, the code is comparing the base channel (shift amount) to the interrupt subdevice's number of channels (1) instead of the digital input subdevice's number of channels (24). Fix it by comparing to 32 because all shift amounts for an `unsigned int` must be less than that and everything from bit 24 upwards is ignored by `ni6527_set_edge_detection()` anyway. Fixes: 110f9e687c1a8 ("staging: comedi: ni_6527: support INSN_CONFIG_DIGITAL_TRIG") Cc: <stable@vger.kernel.org> # 3.17+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200717145257.112660-2-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-20Merge tag 'misc-habanalabs-fixes-2020-07-19' of ↵Greg Kroah-Hartman
git://people.freedesktop.org/~gabbayo/linux into char-misc-linus Oded writes: This tag contains a single bug fix for 5.8-rc7: - Check that an index is in valid range before using it to access an array. The index is received from the user. This is to prevent a possible out-of-bounds access error. * tag 'misc-habanalabs-fixes-2020-07-19' of git://people.freedesktop.org/~gabbayo/linux: habanalabs: prevent possible out-of-bounds array access
2020-07-20Merge tag 'fpga-late-fixes-for-5.8' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-linus Moritz writes: FPGA manager fixes for 5.8 Here are two (late) dfl fixes for the the 5.8 release. Matthew's fix addresses an issue in the reset of a port. Xu'x fix addresses a linter warning. All patches have been reviewed on the mailing list, and have been in the last few linux-next releases (as part of my fixes branch) without issues. Signed-off-by: Moritz Fischer <mdf@kernel.org> * tag 'fpga-late-fixes-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga: fpga: dfl: fix bug in port reset handshake fpga: dfl: pci: reduce the scope of variable 'ret'
2020-07-20net: ieee802154: adf7242: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200719113142.58304-1-grandmaster@al2klimov.de Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2020-07-19net: mscc: ocelot: add support for PTP waveform configurationVladimir Oltean
For PPS output (perout period is 1.000000000), accept the new "phase" parameter from the periodic output request structure. For both PPS and freeform output, accept the new "on" argument for specifying the duty cycle of the generated signal. Preserve the old defaults for this "on" time: 1 us for PPS, and half the period for freeform output. Also preserve the old behavior that accepted the "phase" via the "start" argument. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19ptp: add ability to configure duty cycle for periodic outputVladimir Oltean
There are external event timestampers (PHCs with support for PTP_EXTTS_REQUEST) that timestamp both event edges. When those edges are very close (such as in the case of a short pulse), there is a chance that the collected timestamp might be of the rising, or of the falling edge, we never know. There are also PHCs capable of generating periodic output with a configurable duty cycle. This is good news, because we can space the rising and falling edge out enough in time, that the risks to overrun the 1-entry timestamp FIFO of the extts PHC are lower (example: the perout PHC can be configured for a period of 1 second, and an "on" time of 0.5 seconds, resulting in a duty cycle of 50%). A flag is introduced for signaling that an on time is present in the perout request structure, for preserving compatibility. Logically speaking, the duty cycle cannot exceed 100% and the PTP core checks for this. PHC drivers that don't support this flag emit a periodic output of an unspecified duty cycle, same as before. The duty cycle is encoded as an "on" time, similar to the "start" and "period" times, and reuses the reserved space while preserving overall binary layout. Pahole reported before: struct ptp_perout_request { struct ptp_clock_time start; /* 0 16 */ struct ptp_clock_time period; /* 16 16 */ unsigned int index; /* 32 4 */ unsigned int flags; /* 36 4 */ unsigned int rsv[4]; /* 40 16 */ /* size: 56, cachelines: 1, members: 5 */ /* last cacheline: 56 bytes */ }; And now: struct ptp_perout_request { struct ptp_clock_time start; /* 0 16 */ struct ptp_clock_time period; /* 16 16 */ unsigned int index; /* 32 4 */ unsigned int flags; /* 36 4 */ union { struct ptp_clock_time on; /* 40 16 */ unsigned int rsv[4]; /* 40 16 */ }; /* 40 16 */ /* size: 56, cachelines: 1, members: 5 */ /* last cacheline: 56 bytes */ }; Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net: mvneta: move rxq->left_size on the stackLorenzo Bianconi
Allocate rxq->left_size on mvneta_rx_swbm stack since it is used just in sw bm napi_poll Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net: mvneta: get rid of skb in mvneta_rx_queueLorenzo Bianconi
Remove skb pointer in mvneta_rx_queue data structure since it is no longer used Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net: mvneta: drop all fragments in XDP_DROPLorenzo Bianconi
Release all consumed pages if the eBPF program returns XDP_DROP for XDP multi-buffers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net: mvneta: move mvneta_run_xdp after descriptors processingLorenzo Bianconi
Move mvneta_run_xdp routine after all descriptor processing. This is a preliminary patch to enable multi-buffers and JUMBO frames support for XDP Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net: mvneta: move skb build after descriptors processingLorenzo Bianconi
Move skb build after all descriptors processing. This is a preliminary patch to enable multi-buffers and JUMBO frames support for XDP. Introduce mvneta_xdp_put_buff routine to release all pages used by a XDP multi-buffer Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net: make ->{get,set}sockopt in proto_ops optionalChristoph Hellwig
Just check for a NULL method instead of wiring up sock_no_{get,set}sockopt. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/atm: remove the atmdev_ops {get, set}sockopt methodsChristoph Hellwig
All implementations of these two methods are dummies that always return -EINVAL. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19bonding: check error value of register_netdevice() immediatelyTaehee Yoo
If register_netdevice() is failed, net_device should not be used because variables are uninitialized or freed. So, the routine should be stopped immediately. But, bond_create() doesn't check return value of register_netdevice() immediately. That will result in a panic because of using uninitialized or freed memory. Test commands: modprobe netdev-notifier-error-inject echo -22 > /sys/kernel/debug/notifier-error-inject/netdev/\ actions/NETDEV_REGISTER/error modprobe bonding max_bonds=3 Splat looks like: [ 375.028492][ T193] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] SMP DEBUG_PAGEALLOC PTI [ 375.033207][ T193] CPU: 2 PID: 193 Comm: kworker/2:2 Not tainted 5.8.0-rc4+ #645 [ 375.036068][ T193] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 375.039673][ T193] Workqueue: events linkwatch_event [ 375.041557][ T193] RIP: 0010:dev_activate+0x4a/0x340 [ 375.043381][ T193] Code: 40 a8 04 0f 85 db 00 00 00 8b 83 08 04 00 00 85 c0 0f 84 0d 01 00 00 31 d2 89 d0 48 8d 04 40 48 c1 e0 07 48 03 83 00 04 00 00 <48> 8b 48 10 f6 41 10 01 75 08 f0 80 a1 a0 01 00 00 fd 48 89 48 08 [ 375.050267][ T193] RSP: 0018:ffff9f8facfcfdd8 EFLAGS: 00010202 [ 375.052410][ T193] RAX: 6b6b6b6b6b6b6b6b RBX: ffff9f8fae6ea000 RCX: 0000000000000006 [ 375.055178][ T193] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9f8fae6ea000 [ 375.057762][ T193] RBP: ffff9f8fae6ea000 R08: 0000000000000000 R09: 0000000000000000 [ 375.059810][ T193] R10: 0000000000000001 R11: 0000000000000000 R12: ffff9f8facfcfe08 [ 375.061892][ T193] R13: ffffffff883587e0 R14: 0000000000000000 R15: ffff9f8fae6ea580 [ 375.063931][ T193] FS: 0000000000000000(0000) GS:ffff9f8fbae00000(0000) knlGS:0000000000000000 [ 375.066239][ T193] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 375.067841][ T193] CR2: 00007f2f542167a0 CR3: 000000012cee6002 CR4: 00000000003606e0 [ 375.069657][ T193] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 375.071471][ T193] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 375.073269][ T193] Call Trace: [ 375.074005][ T193] linkwatch_do_dev+0x4d/0x50 [ 375.075052][ T193] __linkwatch_run_queue+0x10b/0x200 [ 375.076244][ T193] linkwatch_event+0x21/0x30 [ 375.077274][ T193] process_one_work+0x252/0x600 [ 375.078379][ T193] ? process_one_work+0x600/0x600 [ 375.079518][ T193] worker_thread+0x3c/0x380 [ 375.080534][ T193] ? process_one_work+0x600/0x600 [ 375.081668][ T193] kthread+0x139/0x150 [ 375.082567][ T193] ? kthread_park+0x90/0x90 [ 375.083567][ T193] ret_from_fork+0x22/0x30 Fixes: e826eafa65c6 ("bonding: Call netif_carrier_off after register_netdevice") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net: dsa: mv88e6xxx: fix in-band AN link establishmentRussell King
If in-band negotiation or fixed-link modes are specified for a DSA port, the DSA code will force the link down during initialisation. For fixed-link mode, this is fine, as phylink will manage the link state. However, for in-band mode, phylink expects the PCS to detect link, which will not happen if the link is forced down. There is a related issue that in in-band mode, the link could come up while we are making configuration changes, so we should force the link down prior to reconfiguring the interface mode. This patch addresses both issues. Fixes: 3be98b2d5fbc ("net: dsa: Down cpu/dsa ports phylink will control") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net: phy: at803x: add mdix configuration support for AR9331 and AR8035Oleksij Rempel
This patch add MDIX configuration ability for AR9331 and AR8035. Theoretically it should work on other Atheros PHYs, but I was able to test only this two. Since I have no certified reference HW able to detect or configure MDIX, this functionality was confirmed by oscilloscope. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net: enetc: Use DT protocol information to set up the portsAlex Marginean
Use DT information rather than in-band information from bootloader to set up MAC for XGMII. For RGMII use the DT indication in addition to RGMII defaults in hardware. However, this implies that PHY connection information needs to be extracted before netdevice creation, when the ENETC Port MAC is being configured. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Michael Walle <michael@walle.cc> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net: enetc: Initialize SerDes for SGMII and USXGMII protocolsMichael Walle
ENETC has ethernet MACs capable of SGMII, 2500BaseX and USXGMII. But in order to use these protocols some SerDes configurations need to be performed. The SerDes is configurable via an internal PCS PHY which is connected to an internal MDIO bus at address 0. This patch basically removes the dependency on bootloader regarding SerDes initialization. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net: dsa: felix: (re)use already existing constantsMichael Walle
Now that there are USXGMII constants available, drop the old definitions and reuse the generic ones. Signed-off-by: Michael Walle <michael@walle.cc> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20drm/lima: fix wait pp reset timeoutQiang Yu
PP bcast is marked as doing async reset after job is done. When resume after suspend, each PP is reset individually, so no need to reset in PP bcast resume. But I forgot to clear the PP bcast async reset mark so call into async wait before job run and gets timeout. Closes: https://gitlab.freedesktop.org/lima/linux/-/issues/34 Fixes: 3446d7e9883d ("drm/lima: add resume/suspend callback for each ip") Reviewed-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200719073050.776962-1-yuq825@gmail.com
2020-07-19Merge tag 'irq-urgent-2020-07-19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull irq fixes from Thomas Gleixner: "Two fixes for the interrupt subsystem: - Make the handling of the firmware node consistent and do not free the node after the domain has been created successfully. The core code stores a pointer to it which can lead to a use after free or double free. This used to "work" because the pointer was not stored when the initial code was written, but at some point later it was required to store it. Of course nobody noticed that the existing users break that way. - Handle affinity setting on inactive interrupts correctly when hierarchical irq domains are enabled. When interrupts are inactive with the modern hierarchical irqdomain design, the interrupt chips are not necessarily in a state where affinity changes can be handled. The legacy irq chip design allowed this because interrupts are immediately fully initialized at allocation time. X86 has a hacky workaround for this, but other implementations do not. This cased malfunction on GIC-V3. Instead of playing whack a mole to find all affected drivers, change the core code to store the requested affinity setting and then establish it when the interrupt is allocated, which makes the X86 hack go away" * tag 'irq-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/affinity: Handle affinity setting on inactive interrupts correctly irqdomain/treewide: Keep firmware node unconditionally allocated
2020-07-19Merge tag 'usb-5.8-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb into master Pull USB fixes from Greg KH: "Here are a few small USB fixes, and one thunderbolt fix, for 5.8-rc6. Nothing huge in here, just the normal collection of gadget, dwc2/3, serial, and other minor USB driver fixes and id additions. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: iuu_phoenix: fix memory corruption USB: c67x00: fix use after free in c67x00_giveback_urb usb: gadget: function: fix missing spinlock in f_uac1_legacy usb: gadget: udc: atmel: fix uninitialized read in debug printk usb: gadget: udc: atmel: remove outdated comment in usba_ep_disable() usb: dwc2: Fix shutdown callback in platform usb: cdns3: trace: fix some endian issues usb: cdns3: ep0: fix some endian issues usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init() usb: gadget: fix langid kernel-doc warning in usbstring.c usb: dwc3: pci: add support for the Intel Jasper Lake usb: dwc3: pci: add support for the Intel Tiger Lake PCH -H variant usb: chipidea: core: add wakeup support for extcon USB: serial: option: add Quectel EG95 LTE modem thunderbolt: Fix path indices used in USB3 tunnel discovery USB: serial: ch341: add new Product ID for CH340 USB: serial: option: add GosunCn GM500 series USB: serial: cypress_m8: enable Simply Automated UPB PIM
2020-07-19Revert "media: atomisp: keep the ISP powered on when setting it"Mauro Carvalho Chehab
changeset d0213061a501 ("media: atomisp: fix mask and shift operation on ISPSSPM0") solved the existing issue with the IUNIT power on code. So, the driver can now use the right code again. This reverts commit 95d1f398c4dc3f55e9007c89452ccc16301205fc. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-19media: atomisp: fix mask and shift operation on ISPSSPM0Colin Ian King
Currently the check on bits 25:24 on ISPSSPM0 is always 0 because the mask and shift operations are incorrect. Fix this by shifting by MRFLD_ISPSSPM0_ISPSSS_OFFSET (24 bits right) and then masking with RFLD_ISPSSPM0_ISPSSC_MASK (0x03) to get the appropriate 2 bits to check. Addresses-Coverity: ("Operands don't affect result") Fixes: 0f441fd70b1e ("media: atomisp: simplify the power down/up code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-19media: atomisp: move system_local consts into a C fileMauro Carvalho Chehab
Instead of declaring all those consts everywhere when the headers are included, just place them on a single place. This change shuts up lots of warnings when built with W=1: In file included from drivers/staging/media/atomisp/pci/ia_css_acc_types.h:23, from drivers/staging/media/atomisp/pci/ia_css.h:26, from drivers/staging/media/atomisp/pci/atomisp_compat_css20.h:24, from drivers/staging/media/atomisp/pci/atomisp_compat.h:22, from drivers/staging/media/atomisp/pci/atomisp_drvfs.c:23: ./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = { | ^~~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = { | ^~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=] 165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=] 153 | static const hrt_address RX_BASE[N_RX_ID] = { | ^~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=] 138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=] 130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { | ^~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { | ^~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=] 120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = { | ^~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=] 116 | static const hrt_address GP_TIMER_BASE = | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=] 109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=] 96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=] 90 | static const hrt_address GDC_BASE[N_GDC_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=] 78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=] 73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=] 69 | static const hrt_address DMA_BASE[N_DMA_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=] 63 | static const hrt_address MMU_BASE[N_MMU_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=] 45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ In file included from drivers/staging/media/atomisp/pci/ia_css_acc_types.h:23, from drivers/staging/media/atomisp/pci/ia_css.h:26, from drivers/staging/media/atomisp/pci/atomisp_file.c:27: ./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = { | ^~~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = { | ^~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=] 165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=] 153 | static const hrt_address RX_BASE[N_RX_ID] = { | ^~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=] 138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=] 130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { | ^~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { | ^~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=] 120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = { | ^~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=] 116 | static const hrt_address GP_TIMER_BASE = | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=] 109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=] 96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=] 90 | static const hrt_address GDC_BASE[N_GDC_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=] 78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=] 73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=] 69 | static const hrt_address DMA_BASE[N_DMA_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=] 63 | static const hrt_address MMU_BASE[N_MMU_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=] 45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ In file included from ./drivers/staging/media/atomisp//pci/ia_css_acc_types.h:23, from ./drivers/staging/media/atomisp//pci/ia_css_pipe_public.h:29, from drivers/staging/media/atomisp/pci/sh_css_legacy.h:23, from drivers/staging/media/atomisp/pci/atomisp_internal.h:34, from drivers/staging/media/atomisp/pci/atomisp_cmd.h:30, from drivers/staging/media/atomisp/pci/atomisp_csi2.c:21: ./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = { | ^~~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = { | ^~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=] 165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=] 153 | static const hrt_address RX_BASE[N_RX_ID] = { | ^~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=] 138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=] 130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { | ^~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { | ^~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=] 120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = { | ^~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=] 116 | static const hrt_address GP_TIMER_BASE = | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=] 109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=] 96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=] 90 | static const hrt_address GDC_BASE[N_GDC_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=] 78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=] 73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=] 69 | static const hrt_address DMA_BASE[N_DMA_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=] 63 | static const hrt_address MMU_BASE[N_MMU_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=] 45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ In file included from ./drivers/staging/media/atomisp//pci/ia_css_acc_types.h:23, from ./drivers/staging/media/atomisp//pci/ia_css_pipe_public.h:29, from drivers/staging/media/atomisp/pci/sh_css_legacy.h:23, from drivers/staging/media/atomisp/pci/atomisp_internal.h:34, from drivers/staging/media/atomisp/pci/atomisp_acc.h:23, from drivers/staging/media/atomisp/pci/atomisp_acc.c:29: ./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = { | ^~~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = { | ^~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=] 165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=] 153 | static const hrt_address RX_BASE[N_RX_ID] = { | ^~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=] 138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=] 130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { | ^~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { | ^~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=] 120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = { | ^~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=] 116 | static const hrt_address GP_TIMER_BASE = | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=] 109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=] 96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=] 90 | static const hrt_address GDC_BASE[N_GDC_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=] 78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=] 73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=] 69 | static const hrt_address DMA_BASE[N_DMA_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=] 63 | static const hrt_address MMU_BASE[N_MMU_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=] 45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-19media: atomisp: get rid of version-specific system_local.hMauro Carvalho Chehab
After removing the unused 32-bits data, the isp2401_system_local.h now contains everything that it is needed, either by isp2401 or by isp2400. So, remove code duplication. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-19media: atomisp: move global stuff into a common headerMauro Carvalho Chehab
Right now, there are two versions of system_global.h headers. Both share a lot of common code. There are some ISP2401 specific types on one of the headers, but it doesn't conflict with the ISP2400 ones. Also, the common code is identical. So, remove code duplication by moving such code into a common header. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-19media: atomisp: remove non-used 32-bits consts at system_localMauro Carvalho Chehab
There is an abstraction at the code in order to support 32 or 64 bits address/data length. However, for all Atom chipsets supported by this version, the size is fixed. So, cleanup the mess, removing the uused code and placing the data sizes on a single place. The end goal is to completely remove those local/global headers, replacing them by some ISP-version dependent struct, in order for the driver to decide what version it would need in runtime. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-19media: atomisp: get rid of some unused static varsMauro Carvalho Chehab
There are several static vars declared inside the system local headers. This causes lots of warnings when W=1. Remove the unused ones. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-19media: atomisp: Fix error code in ov5693_probe()Dan Carpenter
If gmin_camera_platform_data() returns NULL then we should return a negative error instead of success. Fixes: 90ebe55ab886 ("media: staging: atomisp: Add driver prefix to Kconfig option and module names") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-19media: atomisp: Replace trace_printk by pr_infoNicolas Boichat
trace_printk should not be used in production code, replace it call with pr_info. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-19media: atomisp: Fix __func__ style warningsBaidyanath Kundu
This patch fixes the checkpatch.pl warning: Prefer using '"%s...", __func__' to using '<function name>', this function's name, in a string Signed-off-by: Baidyanath Kundu <kundubaidya99@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-19media: atomisp: fix help message for ISP2401 selectionMauro Carvalho Chehab
I'm pretty sure I named this right, but it sounds that I ended doing something weird maybe while solving some conflict. So, fix the title of this config var. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-19habanalabs: prevent possible out-of-bounds array accessOded Gabbay
Queue index is received from the user. Therefore, we must validate it before using it to access the queue props array. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Reviewed-by: Tomer Tayar <ttayar@habana.ai>
2020-07-18Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi into master Pull SCSI fix from James Bottomley: "One small driver fix. Although the one liner makes it sound like a cosmetic change, it's a regression fix for the megaraid_sas driver" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: megaraid_sas: Remove undefined ENABLE_IRQ_POLL macro
2020-07-18Merge tag 'hwmon-for-v5.8-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging into master Pull hwmon fixes from Guenter Roeck: - Using SCT on some Tohsiba drives causes firmware hangs. Disable its use in the drivetemp driver. - Handle potential buffer overflows in scmi and aspeed-pwm-tacho driver. - Energy reporting does not work well on all AMD CPUs. Restrict amd_energy to known working models. - Enable reading the CPU temperature on NCT6798D using undocumented registers. - Fix read errors seen if PEC is enabled in adm1275 driver. - Fix setting the pwm1_enable in emc2103 driver. * tag 'hwmon-for-v5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drives hwmon: (scmi) Fix potential buffer overflow in scmi_hwmon_probe() hwmon: (nct6775) Accept PECI Calibration as temperature source for NCT6798D hwmon: (adm1275) Make sure we are reading enough data for different chips hwmon: (emc2103) fix unable to change fan pwm1_enable attribute hwmon: (amd_energy) match for supported models hwmon: (aspeed-pwm-tacho) Avoid possible buffer overflow
2020-07-18hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drivesMaciej S. Szmigiero
It has been observed that Toshiba DT01ACA family drives have WRITE FPDMA QUEUED command timeouts and sometimes just freeze until power-cycled under heavy write loads when their temperature is getting polled in SCT mode. The SMART mode seems to be fine, though. Let's make sure we don't use SCT mode for these drives then. While only the 3 TB model was actually caught exhibiting the problem let's play safe here to avoid data corruption and extend the ban to the whole family. Fixes: 5b46903d8bf3 ("hwmon: Driver for disk and solid state drives with temperature sensors") Cc: stable@vger.kernel.org Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Link: https://lore.kernel.org/r/0cb2e7022b66c6d21d3f189a12a97878d0e7511b.1595075458.git.mail@maciej.szmigiero.name Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-18media: atomisp: i2c: atomisp-ov2680.c: fixed a brace coding style issue.B K Karthik
Fixed a coding style issue. Signed-off-by: B K Karthik <karthik.bk2000@live.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-18media: atomisp: make const arrays static, makes object smallerColin Ian King
Don't populate const arrays on the stack but instead make them static. Makes the object code smaller by 150 bytes. Before: text data bss dec hex filename 111083 23692 64 134839 20eb7 atomisp/pci/atomisp_compat_css20.o After: text data bss dec hex filename 110773 23852 64 134689 20e21 atomisp/pci/atomisp_compat_css20.o After: (gcc version 9.3.0, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-18media: atomisp: Clean up non-existing folders from MakefileAndy Shevchenko
Compiler is not happy about leftovers: cc1: warning: .../pci/hrt/: No such file or directory [-Wmissing-include-dirs] cc1: warning: .../pci/hive_isp_css_include/memory_access/: No such file or directory [-Wmissing-include-dirs] cc1: warning: .../pci/css_2400_system/hrt/: No such file or directory [-Wmissing-include-dirs] Drop them from Makefile. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-18media: atomisp: Get rid of ACPI specifics in gmin_subdev_add()Andy Shevchenko
First of all ACPI HID is a part of the device name which is printed as a part of the dev_info(dev, ...); line. Second, since the only BID is left, it's a part of ACPI path, which can be printed via %pfw. Besides that, drop ACPI handle from atomisp_get_acpi_power() parameters. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-18media: atomisp: Provide Gmin subdev as parameter to gmin_subdev_add()Andy Shevchenko
Provide Gmin subdev as parameter to gmin_subdev_add() to avoid direct global variable usage. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-18media: atomisp: Use temporary variable for device in gmin_subdev_add()Andy Shevchenko
Use temporary variable for device in gmin_subdev_add(). While here, drop unused temporary variable for device in other places. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-18media: atomisp: Refactor PMIC detection to a separate functionAndy Shevchenko
Refactor PMIC detection to a separate function. In the future we may move this code somewhere else where it's more suitable. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-18media: atomisp: Deduplicate return ret in gmin_i2c_write()Andy Shevchenko
Deduplicate return ret in gmin_i2c_write(). While here, replace 'Kernel' by 'kernel' in the message and reduce amount of LOCs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-18media: atomisp: Make pointer to PMIC client globalAndy Shevchenko
When we enumerate second device when PMIC has been successfully detected to AXP, we got into troubles dereferencing NULL pointer. It seems we have to detect PMIC only once because pmic_id is a global variable and code doesn't expect the change of it: Two PMICs on one platform? It's impossible. Crash excerpt: [ 34.335237] BUG: kernel NULL pointer dereference, address: 0000000000000002 ... [ 35.652036] RIP: 0010:gmin_subdev_add.cold+0x32f/0x33e [atomisp_gmin_platform] So, as a quick fix make power a global variable. In next patches we move PMIC detection to be more independent from subdevices. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-18media: atomisp: Don't try to parse unexpected ACPI object typeAndy Shevchenko
There are devices with completely different _DSM() format, and accessing object as a package leads to crashes. Bail out in the case of unexpected object type. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-18media: atomisp: make platform data more readableAndy Shevchenko
Add few blank lines to make platform data more readable. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-14 18:38:56 +0000