| Age | Commit message (Collapse) | Author |
|---|
|
When the extra HPD polling in sun4i_hdmi was removed, the result of
HPD was accidentally inverted.
Fix this by inverting the check.
Fixes: bda8eaa6dee7 ("drm: sun4i: hdmi: Remove extra HPD polling")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200711011030.21997-1-wens@kernel.org
|
|
git://people.freedesktop.org/~gabbayo/linux into char-misc-linus
This tag contains the following fixes for 5.8-rc4/5:
- Prevent user from using command WREG_BULK in PCI DMA channel. The command
won't be parsed correctly by the driver and will cause unknown behavior.
As the user doesn't need to use that command in that channel, its better
to just prevent it completely.
- Change the interface of the clock gating debugfs property from true/false
to bitmask with bit per engine. This will allow the user to debug the
ASIC while disabling the clock gating feature with fine-grain
granularity.
- Increase message-to-ASIC-CPU timeout to 4s (from 100ms/1s). The ASIC CPU
might respond sometimes after a large delay due to slow external
interfaces (such as temperature sensors) and that will result in a driver
timeout which will lead to ASIC reset.
* tag 'misc-habanalabs-fixes-2020-07-10' of git://people.freedesktop.org/~gabbayo/linux:
habanalabs: set 4s timeout for message to device CPU
habanalabs: set clock gating per engine
habanalabs: block WREG_BULK packet on PDMA
|
|
Forcefully unbinding PMU drivers during perf sampling will lead to
a kernel panic, because the perf upper-layer framework call a NULL
pointer in this situation.
To solve this issue, "suppress_bind_attrs" should be set to true, so
that bind/unbind can be disabled via sysfs and prevent unbinding PMU
drivers during perf sampling.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1594975763-32966-1-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When probe fail, we should destroy the workqueue.
Fixes: 2795e8c25161 ("net: ieee802154: fix a potential NULL pointer dereference")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20200717090121.2143-1-liujian56@huawei.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
into master
Pull drm fixes from Dave Airlie:
"Weekly fixes pull, big bigger than I'd normally like, but they are
fairly scattered and small individually.
The vmwgfx one is a black screen regression, otherwise the largest is
an MST encoder fix for amdgpu which results in a WARN in some cases,
and a scattering of i915 fixes.
I'm tracking two regressions at the moment that hopefully we get
nailed down this week for rc7.
dma-buf:
- sleeping atomic fix
amdgpu:
- Fix a race condition with KIQ
- Preemption fix
- Fix handling of fake MST encoders
- OLED panel fix
- Handle allocation failure in stream construction
- Renoir SMC fix
- SDMA 5.x fix
i915:
- FBC w/a stride fix
- Fix use-after-free fix on module reload
- Ignore irq enabling on the virtual engines to fix device sleep
- Use GTT when saving/restoring engine GPR
- Fix selftest sort function
vmwgfx:
- black screen fix
aspeed:
- fbcon init warn fix"
* tag 'drm-fixes-2020-07-17-1' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu/sdma5: fix wptr overwritten in ->get_wptr()
drm/amdgpu/powerplay: Modify SMC message name for setting power profile mode
drm/amd/display: handle failed allocation during stream construction
drm/amd/display: OLED panel backlight adjust not work with external display connected
drm/amdgpu/display: create fake mst encoders ahead of time (v4)
drm/amdgpu: fix preemption unit test
drm/amdgpu/gfx10: fix race condition for kiq
drm/i915: Recalculate FBC w/a stride when needed
drm/i915: Move cec_notifier to intel_hdmi_connector_unregister, v2.
drm/i915/gt: Only swap to a random sibling once upon creation
drm/i915/gt: Ignore irq enabling on the virtual engines
drm/i915/perf: Use GTT when saving/restoring engine GPR
drm/i915/selftests: Fix compare functions provided for sorting
drm/vmwgfx: fix update of display surface when resolution changes
dmabuf: use spinlock to access dmabuf->name
drm/aspeed: Call drm_fbdev_generic_setup after drm_dev_register
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.8-2020-07-15:
amdgpu:
- Fix a race condition with KIQ
- Preemption fix
- Fix handling of fake MST encoders
- OLED panel fix
- Handle allocation failure in stream construction
- Renoir SMC fix
- SDMA 5.x fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200715213914.3994-1-alexander.deucher@amd.com
|
|
The 128 bits ct_label field is matched using a 32 bit hardware register.
As such, only the lower 32 bits of ct_label field are offloaded. Change
this logic to support setting and matching higher bits too.
Map the 128 bits data to a unique 32 bits ID. Matching is done as exact
match of the mapping ID of key & mask.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Maor Dickman <maord@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
UMR WQEs are posted in bulks, and HW is notified once per a bulk.
Reduce the number of completions by requesting such only for
the last WQE of the bulk.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Use INDIRECT_CALL_2() helper to avoid the cost of the indirect call
when/if CONFIG_RETPOLINE=y.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Use INDIRECT_CALL_2() helper to avoid the cost of the indirect call
when/if CONFIG_RETPOLINE=y.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Synchronize offloading device ESN with xfrm received SN
by updating an existing IPsec HW context with the new SN.
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
On receive flow inspect received packets for IPsec offload indication
using the cqe, for IPsec offloaded packets propagate offload status
and stack handle to stack for further processing.
Supported statuses:
- Offload ok.
- Authentication failure.
- Bad trailer indication.
Connect-X IPsec does not use mlx5e_ipsec_handle_rx_cqe.
For RX only offload, we see the BW gain. Below is the iperf3
performance report on two server of 24 cores Intel(R) Xeon(R)
CPU E5-2620 v3 @ 2.40GHz with ConnectX6-DX.
We use one thread per IPsec tunnel.
---------------------------------------------------------------------
Mode | Num tunnel | BW | Send CPU util | Recv CPU util
| | (Gbps) | (Average %) | (Average %)
---------------------------------------------------------------------
Cryto offload | 1 | 4.6 | 4.2 | 14.5
---------------------------------------------------------------------
Cryto offload | 24 | 38 | 73 | 63
---------------------------------------------------------------------
Non-offload | 1 | 4 | 4 | 13
---------------------------------------------------------------------
Non-offload | 24 | 23 | 52 | 67
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Introduce decrypt FT, the RX error FT and the default rules.
The IPsec RX decrypt flow table is pointed by the TTC
(Traffic Type Classifier) ESP steering rules.
The decrypt flow table has two flow groups. The first flow group
keeps the decrypt steering rule programmed via the "ip xfrm s" interface.
The second flow group has a default rule to forward all non-offloaded
ESP packet to the TTC ESP default RSS TIR.
The RX error flow table is the destination of the decrypt steering rules
in the IPsec RX decrypt flow table. It has a fixed rule with single
copy action that copies ipsec_syndrome to metadata_regB[0:6]. The IPsec
syndrome is used to filter out non-ipsec packet and to return the IPsec
crypto offload status in Rx flow. The destination of RX error flow table
is the TTC ESP default RSS TIR.
All the FTs (decrypt FT and error FT) are created only when IPsec SAs
are added. If there is no IPsec SAs, the FTs are removed.
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
This patch adds support for Connect-X IPsec crypto offload
by implementing the IPsec acceleration layer needed routines,
which delegates IPsec offloads to Connect-X routines.
In Connect-X IPsec, a Security Association (SA) is added or deleted
via allocating a HW context of an encryption/decryption key and
a HW context of a matching SA (IPsec object).
The Security Policy (SP) is added or deleted by creating matching Tx/Rx
steering rules whith an action of encryption/decryption respectively,
executed using the previously allocated SA HW context.
When new xfrm state (SA) is added:
- Use a separate crypto key HW context.
- Create a separate IPsec context in HW to inlcude the SA properties:
- aes-gcm salt.
- ICV properties (ICV length, implicit IV).
- on supported devices also update ESN.
- associate the allocated crypto key with this IPsec context.
Introduce a new compilation flag MLX5_IPSEC for it.
Downstream patches will implement the Rx,Tx steering
and will add the update esn.
Signed-off-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
This to set the base for downstream patches to support
the new IPsec implementation of the Connect-X family.
Following modifications made:
- Remove accel layer dependency from MLX5_FPGA_IPSEC.
- Introduce accel_ipsec_ops, each IPsec device will
have to support these ops.
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Currently only ECPF allows enabling eswitch when SR-IOV is disabled.
Enable PF also to enable eswitch when SR-IOV is disabled.
Load VF vports when eswitch is already enabled.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
for non ECPF eswitch manager function, vports are already
enabled/disabled when eswitch is enabled/disabled respectively.
Simplify function change handler for such eswitch manager function.
Therefore, ECPF is the only one which remains PF/VF function change
handler.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
TLS runs only over Eth, and the Eth driver is the only user of
the core TLS functionality.
There is no meaning of having the core functionality without the usage
in Eth driver.
Hence, let both TLS core implementations depend on MLX5_CORE_EN,
and select MLX5_EN_TLS.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
mlx5e_accel_sk_get_rxq is only used in ktls_rx.c file which already
depends on XPS to be compiled, move it from the generic en_accel.h
header to be local in ktls_rx.c, to fix the below build break
In file included from
../drivers/net/ethernet/mellanox/mlx5/core/en_main.c:49:0:
../drivers/net/ethernet/mellanox/mlx5/core/en_accel/en_accel.h:
In function ‘mlx5e_accel_sk_get_rxq’:
../drivers/net/ethernet/mellanox/mlx5/core/en_accel/en_accel.h:153:12:
error: implicit declaration of function ‘sk_rx_queue_get’ ...
int rxq = sk_rx_queue_get(sk);
^~~~~~~~~~~~~~~
Fixes: 1182f3659357 ("net/mlx5e: kTLS, Add kTLS RX HW offload support")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
|
|
Cited commit in fixes tag missed to set the switch id of the PF and VF
ports. Due to this flow cannot be offloaded, a simple command like below
fails to offload with below error.
tc filter add dev ens2f0np0 parent ffff: prio 1 flower \
dst_mac 00:00:00:00:00:00/00:00:00:00:00:00 skip_sw \
action mirred egress redirect dev ens2f0np0pf0vf0
Error: mlx5_core: devices are not on same switch HW, can't offload forwarding.
Hence, fix it by setting switch id for each PF and VF representors port
as before the cited commit.
Fixes: 71ad8d55f8e5 ("devlink: Replace devlink_port_attrs_set parameters with a struct")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
|
|
From Documentation/networking/timestamping.txt:
A driver which supports hardware time stamping shall update the
struct with the actual, possibly more permissive configuration.
Do update the struct passed when we upscale the requested time
stamping mode.
Fixes: cb646e2b02b2 ("ptp: Added a clock driver for the National Semiconductor PHYTER.")
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.8-rc cycle
Few fixes for issues noticed during testing:
- Two DEBUG_ATOMIC_SLEEP fixes for ti-sysc interconnect target module
driver
- A regression fix for ti-sysc no-idle handling that caused issues
compared to earlier platform data based booting
- A fix for memory leak for omap_hwmod_allocate_module
- Fix d_can driver probe for am437x
* tag 'omap-for-v5.8/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Fix dcan driver probe failed on am437x platform
ARM: OMAP2+: Fix possible memory leak in omap_hwmod_allocate_module
bus: ti-sysc: Do not disable on suspend for no-idle
bus: ti-sysc: Fix sleeping function called from invalid context for RTC quirk
bus: ti-sysc: Fix wakeirq sleeping function called from invalid context
Link: https://lore.kernel.org/r/pull-1594840100-132735@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.8, round 2:
- A couple of fixes on i.MX platform device registration code to stop
the use of invalid IRQ 0.
- Fix a regression seen on ls1021a platform, caused by commit
52102a3ba6a61 ("soc: imx: move cpu code to drivers/soc/imx").
- Fix a misconfiguration of audio SSI on imx6qdl-gw551x board.
* tag 'imx-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: check ls1021a
ARM: imx: Remove imx_add_imx_dma() unused irq_err argument
ARM: imx: Provide correct number of resources when registering gpio devices
ARM: dts: imx6qdl-gw551x: fix audio SSI
Link: https://lore.kernel.org/r/20200714145649.GP15718@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes
Amlogic fixes for v5.8-rc
- misc DT fixes, and SoC ID fixes
* tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson: Align L2 cache-controller nodename with dtschema
arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequency
arm64: dts: meson: add missing gxl rng clock
soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's
Link: https://lore.kernel.org/r/7hk0zc1ujc.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Having the users of MSCC_OCELOT_SWITCH_LIB depend on REGMAP_MMIO was a
bad idea, since that symbol is not user-selectable. So we should have
kept a 'select REGMAP_MMIO'.
When we do that, we run into 2 more problems:
- By depending on GENERIC_PHY, we are causing a recursive dependency.
But it looks like GENERIC_PHY has no other dependencies, and other
drivers select it, so we can select it too:
drivers/of/Kconfig:69:error: recursive dependency detected!
drivers/of/Kconfig:69: symbol OF_IRQ depends on IRQ_DOMAIN
kernel/irq/Kconfig:68: symbol IRQ_DOMAIN is selected by REGMAP
drivers/base/regmap/Kconfig:7: symbol REGMAP default is visible depending on REGMAP_MMIO
drivers/base/regmap/Kconfig:39: symbol REGMAP_MMIO is selected by MSCC_OCELOT_SWITCH_LIB
drivers/net/ethernet/mscc/Kconfig:15: symbol MSCC_OCELOT_SWITCH_LIB is selected by MSCC_OCELOT_SWITCH
drivers/net/ethernet/mscc/Kconfig:22: symbol MSCC_OCELOT_SWITCH depends on GENERIC_PHY
drivers/phy/Kconfig:8: symbol GENERIC_PHY is selected by PHY_BCM_NS_USB3
drivers/phy/broadcom/Kconfig:41: symbol PHY_BCM_NS_USB3 depends on MDIO_BUS
drivers/net/phy/Kconfig:13: symbol MDIO_BUS depends on MDIO_DEVICE
drivers/net/phy/Kconfig:6: symbol MDIO_DEVICE is selected by PHYLIB
drivers/net/phy/Kconfig:254: symbol PHYLIB is selected by ARC_EMAC_CORE
drivers/net/ethernet/arc/Kconfig:19: symbol ARC_EMAC_CORE is selected by ARC_EMAC
drivers/net/ethernet/arc/Kconfig:25: symbol ARC_EMAC depends on OF_IRQ
- By depending on PHYLIB, we are causing a recursive dependency. PHYLIB
only has a single dependency, "depends on NETDEVICES", which we are
already depending on, so we can again hack our way into conformance by
turning the PHYLIB dependency into a select.
drivers/of/Kconfig:69:error: recursive dependency detected!
drivers/of/Kconfig:69: symbol OF_IRQ depends on IRQ_DOMAIN
kernel/irq/Kconfig:68: symbol IRQ_DOMAIN is selected by REGMAP
drivers/base/regmap/Kconfig:7: symbol REGMAP default is visible depending on REGMAP_MMIO
drivers/base/regmap/Kconfig:39: symbol REGMAP_MMIO is selected by MSCC_OCELOT_SWITCH_LIB
drivers/net/ethernet/mscc/Kconfig:15: symbol MSCC_OCELOT_SWITCH_LIB is selected by MSCC_OCELOT_SWITCH
drivers/net/ethernet/mscc/Kconfig:22: symbol MSCC_OCELOT_SWITCH depends on PHYLIB
drivers/net/phy/Kconfig:254: symbol PHYLIB is selected by ARC_EMAC_CORE
drivers/net/ethernet/arc/Kconfig:19: symbol ARC_EMAC_CORE is selected by ARC_EMAC
drivers/net/ethernet/arc/Kconfig:25: symbol ARC_EMAC depends on OF_IRQ
Fixes: f4d0323bae4e ("net: mscc: ocelot: convert MSCC_OCELOT_SWITCH into a library")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a regmap has "fast_io" set then its lock function uses a spinlock.
That doesn't work so well with the functions:
* regmap_cache_only_write_file()
* regmap_cache_bypass_write_file()
Both of the above functions have the pattern:
1. Lock the regmap.
2. Call:
debugfs_write_file_bool()
copy_from_user()
__might_fault()
__might_sleep()
Let's reorder things a bit so that we do all of our sleepable
functions before we grab the lock.
Fixes: d3dc5430d68f ("regmap: debugfs: Allow writes to cache state settings")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200715164611.1.I35b3533e8a80efde0cec1cc70f71e1e74b2fa0da@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into master
Pull power management fixes from Rafael Wysocki:
"Add missing handling of a command line switch to the intel_pstate
driver (Rafael Wysocki) and fix the freeing of the operating
performance point (OPP) entries for the legacy (v1) OPP table type
(Walter Lozano)"
* tag 'pm-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
opp: Increase parsed_static_opps in _of_add_opp_table_v1()
cpufreq: intel_pstate: Fix active mode setting from command line
|
|
No need to use snprintf() on a constant string, nor using magic
constant in the fixed code was a good idea.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Code of the form "if(x) x = 0" replaced with "x = 0".
Code of the form "if(x == a) x = a" removed.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Initializing with 0 makes it much easier to identify time stamps from
otherwise uninitialized clock.
Initialization of PTP clock with current kernel time makes little sense as
PTP time scale differs from UTC time scale that kernel time represents.
It only leads to confusion when no actual PTP initialization happens, as
these time scales differ in a small integer number of seconds (37 at the
time of writing.)
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PPS feature could be useful even when hardware time stamping
of network packets is not in use, so remove offending check
for this condition from fec_ptp_enable_pps().
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc into master
Pull char/misc fixes from Greg KH:
"Here are number of small char/misc driver fixes for 5.8-rc6
Not that many complex fixes here, just a number of small fixes for
reported issues, and some new device ids. Nothing fancy.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
virtio: virtio_console: add missing MODULE_DEVICE_TABLE() for rproc serial
intel_th: Fix a NULL dereference when hub driver is not loaded
intel_th: pci: Add Emmitsburg PCH support
intel_th: pci: Add Tiger Lake PCH-H support
intel_th: pci: Add Jasper Lake CPU support
virt: vbox: Fix guest capabilities mask check
virt: vbox: Fix VBGL_IOCTL_VMMDEV_REQUEST_BIG and _LOG req numbers to match upstream
uio_pdrv_genirq: fix use without device tree and no interrupt
uio_pdrv_genirq: Remove warning when irq is not specified
coresight: etmv4: Fix CPU power management setup in probe() function
coresight: cti: Fix error handling in probe
Revert "zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO()"
mei: bus: don't clean driver pointer
misc: atmel-ssc: lock with mutex instead of spinlock
phy: sun4i-usb: fix dereference of pointer phy0 before it is null checked
phy: rockchip: Fix return value of inno_dsidphy_probe()
phy: ti: j721e-wiz: Constify structs
phy: ti: am654-serdes: Constify regmap_config
phy: intel: fix enum type mismatch warning
phy: intel: Fix compilation error on FIELD_PREP usage
...
|
|
Fix support for external PTP-aware devices such as DSA or PTP PHY:
Make sure we never time stamp tx packets when hardware time stamping
is disabled.
Check for PTP PHY being in use and then pass ioctls related to time
stamping of Ethernet packets to the PTP PHY rather than handle them
ourselves. In addition, disable our own hardware time stamping in this
case.
Fixes: 6605b730c061 ("FEC: Add time stamping code and a PTP hardware clock")
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into master
Pull driver core fixes from Greg KH:
"Here are 3 driver core fixes for 5.8-rc6.
They resolve some issues found with the deferred probe code for some
types of devices on some embedded systems. They have been tested a
bunch and have been in linux-next for a while with no reported issues"
* tag 'driver-core-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Avoid deferred probe due to fw_devlink_pause/resume()
driver core: Rename dev_links_info.defer_sync to defer_hook
driver core: Don't do deferred probe in parallel with kernel_init thread
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging into master
Pull IIO and staging driver fixes from Greg KH:
"Here are some IIO and staging driver fixes for 5.8-rc6.
The majority of fixes are for IIO drivers, resolving a number of small
reported issues, and there are some counter fixes in here too that
were tied to the IIO fixes. There's only one staging driver fix here,
a comedi fix found by code inspection.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: comedi: verify array index is correct before using it
iio: adc: ad7780: Fix a resource handling path in 'ad7780_probe()'
iio:pressure:ms5611 Fix buffer element alignment
iio:humidity:hts221 Fix alignment and data leak issues
iio:humidity:hdc100x Fix alignment and data leak issues
iio:magnetometer:ak8974: Fix alignment and data leak issues
iio: adc: adi-axi-adc: Fix object reference counting
iio: pressure: zpa2326: handle pm_runtime_get_sync failure
counter: 104-quad-8: Add lock guards - filter clock prescaler
counter: 104-quad-8: Add lock guards - differential encoder
iio: core: add missing IIO_MOD_H2/ETHANOL string identifiers
iio: magnetometer: ak8974: Fix runtime PM imbalance on error
iio: mma8452: Add missed iio_device_unregister() call in mma8452_probe()
iio:health:afe4404 Fix timestamp alignment and prevent data leak.
iio:health:afe4403 Fix timestamp alignment and prevent data leak.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty into master
Pull tty/serial driver fixes from Greg KH:
:Here are some small tty and serial driver fixes for 5.8-rc6.
The largest set of patches in here is a revert of the sysrq changes
that went into 5.8-rc1 but turned out to cause a noticable overhead
and cpu usage.
Other than that, there's a few small serial driver fixes to resolve
reported issues, and finally resolving the spinlock init problem on
many serial driver consoles.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: core: Initialise spin lock before use in uart_configure_port()
serial: mxs-auart: add missed iounmap() in probe failure and remove
serial: sh-sci: Initialize spinlock for uart console
Revert "tty: xilinx_uartps: Fix missing id assignment to the console"
serial: core: drop redundant sysrq checks
serial: core: fix sysrq overhead regression
Revert "serial: core: Refactor uart_unlock_and_check_sysrq()"
tty/serial: fix serial_core.c kernel-doc warnings
tty: serial: cpm_uart: Fix behaviour for non existing GPIOs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux into master
Pull thermal fixes from Daniel Lezcano:
- Fix invalid index array access on int340x_thermal leading to a kernel
panic (Bartosz Szczepanek)
- Fix debug message level to prevent flooding on some platform (Alex
Hung)
- Fix invalid bank access by reverting "thermal: mediatek: fix register
index error" (Enric Balletbo i Serra)
* tag 'thermal-v5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
Revert "thermal: mediatek: fix register index error"
thermal: int3403_thermal: Downgrade error message
thermal/int340x_thermal: Prevent page fault on .set_mode() op
|
|
* pm-cpufreq:
cpufreq: intel_pstate: Fix active mode setting from command line
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.8-rc6
Here's a fix for 5.8 addressing a long-standing bug in iuu_phoenix.
* tag 'usb-serial-5.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: iuu_phoenix: fix memory corruption
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull an operating performance points (OPP) framework fix for 5.8-rc6 from
Viresh Kumar:
"This fixes freeing of the OPP entries for the legacy OPP table type (v1)."
* 'opp/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Increase parsed_static_opps in _of_add_opp_table_v1()
|
|
Commit 3b4b19721ec652 ("nvme: fix possible deadlock when I/O is
blocked") reverted multipath head disk revalidation due to deadlocks
caused by holding the bd_mutex during revalidate.
Updating the multipath disk blockdev size is still required though for
userspace to be able to observe any resizing while the device is
mounted. Directly update the bdev inode size to avoid unnecessarily
holding the bdev->bd_mutex.
Fixes: 3b4b19721ec652 ("nvme: fix possible deadlock when I/O is
blocked")
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Depending on how you look at it, you can either say that:
a) There is a PDC hardware issue (with the specific IP rev that exists
on sc7180) that causes the PDC not to work properly when configured
to handle dual edges.
b) The dual edge feature of the PDC hardware was only added in later
HW revisions and thus isn't in all hardware.
Regardless of how you look at it, let's work around the lack of dual
edge support by only ever letting our parent see requests for single
edge interrupts on affected hardware.
NOTE: it's possible that a driver requesting a dual edge interrupt
might get several edges coalesced into a single IRQ. For instance if
a line starts low and then goes high and low again, the driver that
requested the IRQ is not guaranteed to be called twice. However, it
is guaranteed that once the driver's interrupt handler starts running
its first instruction that any new edges coming in will cause the
interrupt to fire again. This is relatively commonplace for dual-edge
gpio interrupts (many gpio controllers require software to emulate
dual edge with single edge) so client drivers should be setup to
handle it.
Fixes: e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in hierarchy")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200714080254.v3.1.Ie0d730120b232a86a4eac1e2909bcbec844d1766@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
cm.lock must be held while accessing remote_sidr_table. This fixes the
below NULL pointer dereference.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 2 PID: 7288 Comm: udaddy Not tainted 5.7.0_for_upstream_perf_2020_06_09_15_14_20_38 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
RIP: 0010:rb_erase+0x10d/0x360
Code: 00 00 00 48 89 c1 48 89 d0 48 8b 50 08 48 39 ca 74 48 f6 02 01 75 af 48 8b 7a 10 48 89 c1 48 83 c9 01 48 89 78 08 48 89 42 10 <48> 89 0f 48 8b 08 48 89 0a 48 83 e1 fc 48 89 10 0f 84 b1 00 00 00
RSP: 0018:ffffc90000f77c30 EFLAGS: 00010086
RAX: ffff8883df27d458 RBX: ffff8883df27da58 RCX: ffff8883df27d459
RDX: ffff8883d183fa58 RSI: ffffffffa01e8d00 RDI: 0000000000000000
RBP: ffff8883d62ac800 R08: 0000000000000000 R09: 00000000000000ce
R10: 000000000000000a R11: 0000000000000000 R12: ffff8883df27da00
R13: ffffc90000f77c98 R14: 0000000000000130 R15: 0000000000000000
FS: 00007f009f877740(0000) GS:ffff8883f1a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000003d467e003 CR4: 0000000000160ee0
Call Trace:
cm_send_sidr_rep_locked+0x15a/0x1a0 [ib_cm]
ib_send_cm_sidr_rep+0x2b/0x50 [ib_cm]
cma_send_sidr_rep+0x8b/0xe0 [rdma_cm]
__rdma_accept+0x21d/0x2b0 [rdma_cm]
? ucma_get_ctx+0x2b/0xe0 [rdma_ucm]
? _copy_from_user+0x30/0x60
ucma_accept+0x13e/0x1e0 [rdma_ucm]
ucma_write+0xb4/0x130 [rdma_ucm]
vfs_write+0xad/0x1a0
ksys_write+0x9d/0xb0
do_syscall_64+0x48/0x130
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f009ef60924
Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00 00 8b 05 2a ef 2c 00 48 63 ff 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 55 53 48 89 d5 48 89 f3 48 83
RSP: 002b:00007fff843edf38 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000055743042e1d0 RCX: 00007f009ef60924
RDX: 0000000000000130 RSI: 00007fff843edf40 RDI: 0000000000000003
RBP: 00007fff843ee0e0 R08: 0000000000000000 R09: 0000557430433090
R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fff843edf40 R14: 000000000000038c R15: 00000000ffffff00
CR2: 0000000000000000
Fixes: 6a8824a74bc9 ("RDMA/cm: Allow ib_send_cm_sidr_rep() to be done under lock")
Link: https://lore.kernel.org/r/20200716105519.1424266-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The FD should not be installed until all of the setup is completed as the
fd_install() transfers ownership of the kref to the FD table. A thread can
race a close() and trigger concurrent rdma_alloc_commit_uobject() and
uverbs_uobject_fd_release() which, at least, triggers a safety WARN_ON:
WARNING: CPU: 4 PID: 6913 at drivers/infiniband/core/rdma_core.c:768 uverbs_uobject_fd_release+0x202/0x230
Kernel panic - not syncing: panic_on_warn set ...
CPU: 4 PID: 6913 Comm: syz-executor.3 Not tainted 5.7.0-rc2 #22
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[..]
RIP: 0010:uverbs_uobject_fd_release+0x202/0x230
Code: fe 4c 89 e7 e8 af 23 fe ff e9 2a ff ff ff e8 c5 fa 61 fe be 03 00 00 00 4c 89 e7 e8 68 eb f5 fe e9 13 ff ff ff e8 ae fa 61 fe <0f> 0b eb ac e8 e5 aa 3c fe e8 50 2b 86 fe e9 6a fe ff ff e8 46 2b
RSP: 0018:ffffc90008117d88 EFLAGS: 00010293
RAX: ffff88810e146580 RBX: 1ffff92001022fb1 RCX: ffffffff82d5b902
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff88811951b040
RBP: ffff88811951b000 R08: ffffed10232a3609 R09: ffffed10232a3609
R10: ffff88811951b043 R11: 0000000000000001 R12: ffff888100a7c600
R13: ffff888100a7c650 R14: ffffc90008117da8 R15: ffffffff82d5b700
? __uverbs_cleanup_ufile+0x270/0x270
? uverbs_uobject_fd_release+0x202/0x230
? uverbs_uobject_fd_release+0x202/0x230
? __uverbs_cleanup_ufile+0x270/0x270
? locks_remove_file+0x282/0x3d0
? security_file_free+0xaa/0xd0
__fput+0x2be/0x770
task_work_run+0x10e/0x1b0
exit_to_usermode_loop+0x145/0x170
do_syscall_64+0x2d0/0x390
? prepare_exit_to_usermode+0x17a/0x230
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x414da7
Code: 00 00 0f 05 48 3d 00 f0 ff ff 77 3f f3 c3 0f 1f 44 00 00 53 89 fb 48 83 ec 10 e8 f4 fb ff ff 89 df 89 c2 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 2b 89 d7 89 44 24 0c e8 36 fc ff ff 8b 44 24
RSP: 002b:00007fff39d379d0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000414da7
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000003
RBP: 00007fff39d37a3c R08: 0000000400000000 R09: 0000000400000000
R10: 00007fff39d37910 R11: 0000000000000293 R12: 0000000000000001
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000003
Reorder so that fd_install() is the last thing done in
rdma_alloc_commit_uobject().
Fixes: aba94548c9e4 ("IB/uverbs: Move the FD uobj type struct file allocation to alloc_commit")
Link: https://lore.kernel.org/r/20200716102059.1420681-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
ROCE uses "VA % buf_page_size" to caclulate the offset in the PBL's first
page, the actual PA corresponding to the MR's VA is equal to MR's PA plus
this offset. The first PA in PBL has already been aligned to PAGE_SIZE
after calling ib_umem_get(), but the MR's VA may not. If the buf_page_size
is smaller than the PAGE_SIZE, this will lead the HW to access the wrong
memory because the offset is smaller than expected.
Fixes: 9b2cf76c9f05 ("RDMA/hns: Optimize PBL buffer allocation process")
Link: https://lore.kernel.org/r/1594726935-45666-1-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The RoCE Engine will schedule to another QP after one has sent
(2 ^ lp_pktn_ini) packets. lp_pktn_ini is set in QPC and should be
calculated from 2 factors:
1. current MTU as a integer
2. the RoCE Engine's maximum slice length 64KB
But the driver use MTU as a enum ib_mtu and the max inline capability, the
lp_pktn_ini will be much bigger than expected which may cause traffic of
some QPs to never get scheduled.
Fixes: b713128de7a1 ("RDMA/hns: Adjust lp_pktn_ini dynamically")
Link: https://lore.kernel.org/r/1594726138-49294-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
SRQ table is accessed both from interrupt and process context,
therefore we must use xa_lock_irq.
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
kworker/u17:9/8573 takes:
ffff8883e3503d30 (&xa->xa_lock#13){?...}-{2:2}, at: mlx5_cmd_get_srq+0x18/0x70 [mlx5_ib]
{IN-HARDIRQ-W} state was registered at:
lock_acquire+0xb9/0x3a0
_raw_spin_lock+0x25/0x30
srq_event_notifier+0x2b/0xc0 [mlx5_ib]
notifier_call_chain+0x45/0x70
__atomic_notifier_call_chain+0x69/0x100
forward_event+0x36/0xc0 [mlx5_core]
notifier_call_chain+0x45/0x70
__atomic_notifier_call_chain+0x69/0x100
mlx5_eq_async_int+0xc5/0x160 [mlx5_core]
notifier_call_chain+0x45/0x70
__atomic_notifier_call_chain+0x69/0x100
mlx5_irq_int_handler+0x19/0x30 [mlx5_core]
__handle_irq_event_percpu+0x43/0x2a0
handle_irq_event_percpu+0x30/0x70
handle_irq_event+0x34/0x60
handle_edge_irq+0x7c/0x1b0
do_IRQ+0x60/0x110
ret_from_intr+0x0/0x2a
default_idle+0x34/0x160
do_idle+0x1ec/0x220
cpu_startup_entry+0x19/0x20
start_secondary+0x153/0x1a0
secondary_startup_64+0xa4/0xb0
irq event stamp: 20907
hardirqs last enabled at (20907): _raw_spin_unlock_irq+0x24/0x30
hardirqs last disabled at (20906): _raw_spin_lock_irq+0xf/0x40
softirqs last enabled at (20746): __do_softirq+0x2c9/0x436
softirqs last disabled at (20681): irq_exit+0xb3/0xc0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&xa->xa_lock#13);
<Interrupt>
lock(&xa->xa_lock#13);
*** DEADLOCK ***
2 locks held by kworker/u17:9/8573:
#0: ffff888295218d38 ((wq_completion)mlx5_ib_page_fault){+.+.}-{0:0}, at: process_one_work+0x1f1/0x5f0
#1: ffff888401647e78 ((work_completion)(&pfault->work)){+.+.}-{0:0}, at: process_one_work+0x1f1/0x5f0
stack backtrace:
CPU: 0 PID: 8573 Comm: kworker/u17:9 Tainted: GO 5.7.0_for_upstream_min_debug_2020_06_14_11_31_46_41 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib]
Call Trace:
dump_stack+0x71/0x9b
mark_lock+0x4f2/0x590
? print_shortest_lock_dependencies+0x200/0x200
__lock_acquire+0xa00/0x1eb0
lock_acquire+0xb9/0x3a0
? mlx5_cmd_get_srq+0x18/0x70 [mlx5_ib]
_raw_spin_lock+0x25/0x30
? mlx5_cmd_get_srq+0x18/0x70 [mlx5_ib]
mlx5_cmd_get_srq+0x18/0x70 [mlx5_ib]
mlx5_ib_eqe_pf_action+0x257/0xa30 [mlx5_ib]
? process_one_work+0x209/0x5f0
process_one_work+0x27b/0x5f0
? __schedule+0x280/0x7e0
worker_thread+0x2d/0x3c0
? process_one_work+0x5f0/0x5f0
kthread+0x111/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x24/0x30
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/20200712102641.15210-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When users try to remove PMU modules during perf sampling, kernel panic
will happen because the pmu->read() is a NULL pointer here.
INFO on HiSilicon hip08 platform as follow:
pc : hisi_uncore_pmu_event_update+0x30/0xa4 [hisi_uncore_pmu]
lr : hisi_uncore_pmu_read+0x20/0x2c [hisi_uncore_pmu]
sp : ffff800010103e90
x29: ffff800010103e90 x28: ffff0027db0c0e40
x27: ffffa29a76f129d8 x26: ffffa29a77ceb000
x25: ffffa29a773a5000 x24: ffffa29a77392000
x23: ffffddffe5943f08 x22: ffff002784285960
x21: ffff002784285800 x20: ffff0027d2e76c80
x19: ffff0027842859e0 x18: ffff80003498bcc8
x17: ffffa29a76afe910 x16: ffffa29a7583f530
x15: 16151a1512061a1e x14: 0000000000000000
x13: ffffa29a76f1e238 x12: 0000000000000001
x11: 0000000000000400 x10: 00000000000009f0
x9 : ffff8000107b3e70 x8 : ffff0027db0c1890
x7 : ffffa29a773a7000 x6 : 00000007f5131013
x5 : 00000007f5131013 x4 : 09f257d417c00000
x3 : 00000002187bd7ce x2 : ffffa29a38f0f0d8
x1 : ffffa29a38eae268 x0 : ffff0027d2e76c80
Call trace:
hisi_uncore_pmu_event_update+0x30/0xa4 [hisi_uncore_pmu]
hisi_uncore_pmu_read+0x20/0x2c [hisi_uncore_pmu]
__perf_event_read+0x1a0/0x1f8
flush_smp_call_function_queue+0xa0/0x160
generic_smp_call_function_single_interrupt+0x18/0x20
handle_IPI+0x31c/0x4dc
gic_handle_irq+0x2c8/0x310
el1_irq+0xcc/0x180
arch_cpu_idle+0x4c/0x20c
default_idle_call+0x20/0x30
do_idle+0x1b4/0x270
cpu_startup_entry+0x28/0x30
secondary_start_kernel+0x1a4/0x1fc
To solve the above issue, current module should be registered to kernel,
so that try_module_get() can be invoked when perf sampling starts. This
adds the reference counting of module and could prevent users from removing
modules during sampling.
Reported-by: Haifeng Wang <wang.wanghaifeng@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1594891165-8228-1-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The driver would happily overwrite its write buffer with user data in
256 byte increments due to a removed buffer-space sanity check.
Fixes: 5fcf62b0f1f2 ("tty: iuu_phoenix: fix locking.")
Cc: stable <stable@vger.kernel.org> # 2.6.31
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Currently, when using _of_add_opp_table_v2 parsed_static_opps is
increased and this value is used in _opp_remove_all_static() to
check if there are static opp entries that need to be freed.
Unfortunately this does not happen when using _of_add_opp_table_v1(),
which leads to warnings.
This patch increases parsed_static_opps in _of_add_opp_table_v1() in a
similar way as in _of_add_opp_table_v2().
Fixes: 03758d60265c ("opp: Replace list_kref with a local counter")
Cc: v5.6+ <stable@vger.kernel.org> # v5.6+
Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
[ Viresh: Do the operation with lock held and set the value to 1 instead
of incrementing it ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
