summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-10-24drm/i915: Move fence cancellation to runtime suspendChris Wilson
At the moment, we have dependency on the RPM as a barrier itself in both i915_gem_release_all_mmaps() and i915_gem_restore_fences(). i915_gem_restore_fences() is also called along !runtime pm paths, but we can move the markup of lost fences alongside releasing the mmaps into a common i915_gem_runtime_suspend(). This has the advantage of locating all the tricky barrier dependencies into one location. v2: Just mark the fence as invalid (fence->dirty) so that upon waking we will be sure to clear the fence after use, or restore it to the correct value before use. This makes sure that if the fence is left intact across the sleep, we do not leave it pointing to a region of GTT for the next unsuspecting user. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Imre Deak <imre.deak@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161024124218.18252-5-chris@chris-wilson.co.uk
2016-10-24drm/i915: Remove RPM sequence checkingChris Wilson
We only used the RPM sequence checking inside the lowlevel GTT accessors, when we had to rely on callers taking the wakeref on our behalf. Now that we take the RPM wakeref inside the GTT management routines themselves, we can forgo the sanitycheck of the callers. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161024124218.18252-4-chris@chris-wilson.co.uk
2016-10-24drm/i915: Remove superfluous locking around userfault_listChris Wilson
Now that we have reduced the access to the list to either (a) under the struct_mutex whilst holding the RPM wakeref (so that concurrent writers to the list are serialised by struct_mutex) and (b) under the atomic runtime suspend (which cannot run concurrently with any other accessor due to the atomic nature of the runtime suspend) we can remove the extra locking around the list itself. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161024124218.18252-3-chris@chris-wilson.co.uk
2016-10-24drm/i915: Use RPM as the barrier for controlling user mmap accessChris Wilson
We can remove the false coupling between RPM and struct mutex by the observation that we can use the RPM wakeref as the barrier around user mmap access. That is as we tear down the user's PTE atomically from within rpm suspend and then to fault in new PTE requires the rpm wakeref, means that no user access is possible through those PTE without RPM being awake. Having made that observation, we can then remove the presumption of having to take rpm outside of struct_mutex and so allow fine grained acquisition of a wakeref around hw access rather than having to remember to acquire the wakeref early on. v2: Rejig placement of the new intel_runtime_pm_get() to be as tight as possible around the GTT pread/pwrite. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161024124218.18252-2-chris@chris-wilson.co.uk
2016-10-24drm/i915: Move user fault tracking to a separate listChris Wilson
We want to decouple RPM and struct_mutex, but currently RPM has to walk the list of bound objects and remove userspace mmapping before we suspend (otherwise userspace may continue to access the GTT whilst it is powered down). This currently requires the struct_mutex to walk the bound_list, but if we move that to a separate list and lock we can take the first step towards removing the struct_mutex. v2: Split runtime suspend unmapping vs regular unmapping, to make the locking (and barriers) clearer. Add the object to the userfault_list prior to inserting the first PTE, the race between add/revoke depends upon struct_mutex for regular unmappings and rpm for runtime-suspend. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v1 Link: http://patchwork.freedesktop.org/patch/msgid/20161024124218.18252-1-chris@chris-wilson.co.uk
2016-10-24usb: renesas_usbhs: add wait after initialization for R-Car Gen3Yoshihiro Shimoda
Since the controller on R-Car Gen3 doesn't have any status registers to detect initialization (LPSTS.SUSPM = 1) and the initialization needs up to 45 usec, this patch adds wait after the initialization. Otherwise, writing other registers (e.g. INTENB0) will fail. Fixes: de18757e272d ("usb: renesas_usbhs: add R-Car Gen3 power control") Cc: <stable@vger.kernel.org> # v4.6+ Cc: <balbi@kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-24ACPI / APEI: Fix incorrect return value of ghes_proc()Punit Agrawal
Although ghes_proc() tests for errors while reading the error status, it always return success (0). Fix this by propagating the return value. Fixes: d334a49113a4a33 (ACPI, APEI, Generic Hardware Error Source memory error support) Signed-of-by: Punit Agrawal <punit.agrawa.@arm.com> Tested-by: Tyler Baicar <tbaicar@codeaurora.org> Reviewed-by: Borislav Petkov <bp@suse.de> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-24usb: increase ohci watchdog delay to 275 msecBryan Paluch
Increase ohci watchout delay to 275 ms. Previous delay was 250 ms with 20 ms of slack, after removing slack time some ohci controllers don't respond in time. Logs from systems with controllers that have the issue would show "HcDoneHead not written back; disabled" Signed-off-by: Bryan Paluch <bryanpaluch@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-24usb: musb: Call pm_runtime from musb_gadget_queueTony Lindgren
If we're booting pandaboard using NFSroot over built-in g_ether, we can get the following after booting once and doing a warm reset: g_ether gadget: ecm_open g_ether gadget: notify connect true ... WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x220/0x34c 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4CFG (Read): Data Access in User mode du ring Functional access ... Fix the issue by calling pm_runtime functions from musb_gadget_queue. Note that in the long run we should be able to queue the pending transfers if pm_runtime is not active, and flush the queue from pm_runtime_resume. Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-24usb: musb: Fix hardirq-safe hardirq-unsafe lock order errorTony Lindgren
If we configure musb with 2430 glue as a peripheral, and then rmmod omap2430 module, we'll get the following error: [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] ... rmmod/413 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (&phy->mutex){+.+.+.}, at: [<c04b9fd0>] phy_power_off+0x1c/0xb8 [ 204.678710] and this task is already holding: (&(&musb->lock)->rlock){-.-...}, at: [<bf3a482c>] musb_gadget_stop+0x24/0xec [musb_hdrc] which would create a new lock dependency: (&(&musb->lock)->rlock){-.-...} -> (&phy->mutex){+.+.+.} ... This is because some glue layers expect musb_platform_enable/disable to be called with spinlock held, and 2430 glue layer has USB PHY on the I2C bus using a mutex. We could fix the glue layers to take the spinlock, but we still have a problem of musb_plaform_enable/disable being called in an unbalanced manner. So that would still lead into USB PHY enable/disable related problems for omap2430 glue layer. While it makes sense to only enable USB PHY when needed from PM point of view, in this case we just can't do it yet without breaking things. So let's just revert phy_enable/disable related changes instead and reconsider this after we have fixed musb_platform_enable/disable to be balanced. Fixes: a83e17d0f73b ("usb: musb: Improve PM runtime and phy handling for 2430 glue layer") Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-24usb: ehci-platform: increase EHCI_MAX_RSTS to 4Masahiro Yamada
Socionext LD11 SoC (arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi) needs to handle 4 reset lines for EHCI. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-24usb: ohci-at91: Set RemoteWakeupConnected bit explicitly.Wenyou Yang
The reset value of RWC is 0, set RemoteWakeupConnected bit explicitly before calling ohci_run, it also fixes the issue that the mass storage stick connected wasn't suspended when the system suspend. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-24ACPI/PCI: pci_link: Include PIRQ_PENALTY_PCI_USING for ISA IRQsSinan Kaya
Commit 103544d86976 ("ACPI,PCI,IRQ: reduce resource requirements") replaced the addition of PIRQ_PENALTY_PCI_USING in acpi_pci_link_allocate() with an addition in acpi_irq_pci_sharing_penalty(), but f7eca374f000 ("ACPI,PCI,IRQ: separate ISA penalty calculation") removed the use of acpi_irq_pci_sharing_penalty() for ISA IRQs. Therefore, PIRQ_PENALTY_PCI_USING is missing from ISA IRQs used by interrupt links. Include that penalty by adding it in the acpi_pci_link_allocate() path. Fixes: f7eca374f000 (ACPI,PCI,IRQ: separate ISA penalty calculation) Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-24ACPI/PCI: pci_link: penalize SCI correctlySinan Kaya
Ondrej reported that IRQs stopped working in v4.7 on several platforms. A typical scenario, from Ondrej's VT82C694X/694X, is: ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: No IRQ available for PCI Interrupt Link [LNKA] 8139too 0000:00:0f.0: PCI INT A: no GSI We're using PIC routing, so acpi_irq_balance == 0, and LNKA is already active at IRQ 11. In that case, acpi_pci_link_allocate() only tries to use the active IRQ (IRQ 11) which also happens to be the SCI. We should penalize the SCI by PIRQ_PENALTY_PCI_USING, but irq_get_trigger_type(11) returns something other than IRQ_TYPE_LEVEL_LOW, so we penalize it by PIRQ_PENALTY_ISA_ALWAYS instead, which makes acpi_pci_link_allocate() assume the IRQ isn't available and give up. Add acpi_penalize_sci_irq() so platforms can tell us the SCI IRQ, trigger, and polarity directly and we don't have to depend on irq_get_trigger_type(). Fixes: 103544d86976 (ACPI,PCI,IRQ: reduce resource requirements) Link: http://lkml.kernel.org/r/201609251512.05657.linux@rainbow-software.org Reported-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Tested-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-24ACPI/PCI/IRQ: assign ISA IRQ directly during early boot stagesSinan Kaya
We do not want to store the SCI penalty in the acpi_isa_irq_penalty[] table because acpi_isa_irq_penalty[] only holds ISA IRQ penalties and there's no guarantee that the SCI is an ISA IRQ. We add in the SCI penalty as a special case in acpi_irq_get_penalty(). But if we called acpi_penalize_isa_irq() or acpi_irq_penalty_update() for an SCI that happened to be an ISA IRQ, they stored the SCI penalty (part of the acpi_irq_get_penalty() return value) in acpi_isa_irq_penalty[]. Subsequent calls to acpi_irq_get_penalty() returned a penalty that included *two* SCI penalties. Fixes: 103544d86976 (ACPI,PCI,IRQ: reduce resource requirements) Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-24drm/i915: remove AGP dependency from DRM_I915 kconfig help textJani Nikula
We haven't required AGP since 3e99a6b95614 ("drm/i915: Stop depending upon CONFIG_AGP_INTEL"). Split/rearrange the paragraphs a bit while at it. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477041257-8219-1-git-send-email-jani.nikula@intel.com
2016-10-24Merge tag 'iio-fixes-for-4.9a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of IIO fixes for the 4.9 cycle. * atlas chemical - Fix alignment of big endian values in a larger storage (by using the right size storage) * maxim thermocouple - Fix alignment of big endian values in larger (by using the correct sized storage). * sca3000 - Handle unexpected mode values. * ti-adc081 - Select IIO_TRIGGERED_BUFFER to avoid build errors
2016-10-24drm: i915: Wait for fences on new fb, not oldDaniel Stone
The previous code would wait for fences on the framebuffer from the old plane state to complete, rather than the new, so you would see tearing everywhere. Fix this to wait on the new state before we make it active. Signed-off-by: Daniel Stone <daniels@collabora.com> Fixes: 94f050246b42 ("drm/i915: nonblocking commit") Cc: stable@vger.kernel.org Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161021144454.6288-1-daniels@collabora.com
2016-10-24drm/i915: Update DRIVER_DATE to 20161024Daniel Vetter
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-10-24drm/i915/gvt: Fix broken mocs offsetZhenyu Wang
Fix missed mocs offset reg setting for save/restore function. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-24drm/i915/gvt: Implement WaForceWakeRenderDuringMmioTLBInvalidateArkadiusz Hiler
When invalidating RCS TLB the device can enter RC6 state interrupting the process, therefore the need for render forcewake for the whole procedure. This WA is needed for all production SKL SKUs. v2: reworked putting and getting forcewake with help of Mika Kuoppala v3: use I915_READ_FW and I915_WRITE_FW as we are handling forcewake on in the code path References: HSD#2136899, HSD#1404391274 Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-24drm/i915: GVT-g driver depends on 64BIT kernelZhenyu Wang
We currently don't support GVT-g driver on i386 kernel. Add explicit dependence on 64bit kernel. Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-24drm/i915/gvt: Fix failure when ACPI is not enabledZhenyu Wang
Directly use memremap instead of acpi function for opregion mapping. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-24cxl: Fix leaking pid refs in some error pathsVaibhav Jain
In some error paths in functions cxl_start_context and afu_ioctl_start_work pid references to the current & group-leader tasks can leak after they are taken. This patch fixes these error paths to release these pid references before exiting the error path. Fixes: 7b8ad495d592 ("cxl: Fix DSI misses when the context owning task exits") Cc: stable@vger.kernel.org # v4.5+ Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reported-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-24gpio: mpc8xxx: Correct irq handler functionLiu Gang
From the beginning of the gpio-mpc8xxx.c, the "handle_level_irq" has being used to handle GPIO interrupts in the PowerPC/Layerscape platforms. But actually, almost all PowerPC/Layerscape platforms assert an interrupt request upon either a high-to-low change or any change on the state of the signal. So the "handle_level_irq" is not reasonable for PowerPC/Layerscape GPIO interrupt, it should be "handle_edge_irq". Otherwise the system may lost some interrupts from the PIN's state changes. Signed-off-by: Liu Gang <Gang.Liu@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-23Merge tag 'upstream-4.9-rc2' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull UBI[FS] fixes from Richard Weinberger: "This contains fixes for issues in both UBI and UBIFS: - Fallout from the merge window, refactoring UBI code introduced some issues. - Fixes for an UBIFS readdir bug which can cause getdents() to busy loop for ever and a bug in the UBIFS xattr code" * tag 'upstream-4.9-rc2' of git://git.infradead.org/linux-ubifs: ubifs: Abort readdir upon error UBI: Fix crash in try_recover_peb() ubi: fix swapped arguments to call to ubi_alloc_aeb ubifs: Fix xattr_names length in exit paths ubifs: Rename ubifs_rename2
2016-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull SCSI target fixes from Nicholas Bellinger: "Here are the outstanding target-pending fixes for v4.9-rc2. This includes: - Fix v4.1.y+ reference leak regression with concurrent TMR ABORT_TASK + session shutdown. (Vaibhav Tandon) - Enable tcm_fc w/ SCF_USE_CPUID to avoid host exchange timeouts (Hannes) - target/user error sense handling fixes. (Andy + MNC + HCH) - Fix iscsi-target NOP_OUT error path iscsi_cmd descriptor leak (Varun) - Two EXTENDED_COPY SCSI status fixes for ESX VAAI (Dinesh Israni + Nixon Vincent) - Revert a v4.8 residual overflow change, that breaks sg_inq with small allocation lengths. There are a number of folks stress testing the v4.1.y regression fix in their environments, and more folks doing iser-target I/O stress testing atop recent v4.x.y code. There is also one v4.2.y+ RCU conversion regression related to explicit NodeACL configfs changes, that is still being tracked down" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target/tcm_fc: use CPU affinity for responses target/tcm_fc: Update debugging statements to match libfc usage target/tcm_fc: return detailed error in ft_sess_create() target/tcm_fc: print command pointer in debug message target: fix potential race window in target_sess_cmd_list_waiting() Revert "target: Fix residual overflow handling in target_complete_cmd_with_length" target: Don't override EXTENDED_COPY xcopy_pt_cmd SCSI status code target: Make EXTENDED_COPY 0xe4 failure return COPY TARGET DEVICE NOT REACHABLE target: Re-add missing SCF_ACK_KREF assignment in v4.1.y iscsi-target: fix iscsi cmd leak iscsi-target: fix spelling mistake "Unsolicitied" -> "Unsolicited" target/user: Fix comments to not refer to data ring target/user: Return an error if cmd data size is too large target/user: Use sense_reason_t in tcmu_queue_cmd_ring
2016-10-23Merge tag 'hwmon-for-linus-v4.9-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Couple of hwmon fixes: Fix a potential ERR_PTR dereference in max31790 driver, and handle temperature readings below 0 in adm9240 driver" * tag 'hwmon-for-linus-v4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (max31790) potential ERR_PTR dereference hwmon: (adm9240) handle temperature readings below 0
2016-10-23Merge tag 'for-linus-4.9-2' of git://git.code.sf.net/p/openipmi/linux-ipmiLinus Torvalds
Pull IPMI updates from Corey Minyard: "A small bug fix and a new driver for acting as an IPMI device. I was on vacation during the merge window (a long vacation) but this is a bug fix that should go in and a new driver that shouldn't hurt anything. This has been in linux-next for a month or so" * tag 'for-linus-4.9-2' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: fix crash on reading version from proc after unregisted bmc ipmi/bt-bmc: remove redundant return value check of platform_get_resource() ipmi/bt-bmc: add a dependency on ARCH_ASPEED ipmi: Fix ioremap error handling in bt-bmc ipmi: add an Aspeed BT IPMI BMC driver
2016-10-24gpio: ath79: Fix module autoloadJavier Martinez Canillas
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/gpio/gpio-ath79.ko | grep alias $ After this patch: $ modinfo drivers/gpio/gpio-ath79.ko | grep alias alias: of:N*T*Cqca,ar9340-gpioC* alias: of:N*T*Cqca,ar9340-gpio alias: of:N*T*Cqca,ar7100-gpioC* alias: of:N*T*Cqca,ar7100-gpio Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Aban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-23Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== pull request: bluetooth 2016-10-21 Here are some more Bluetooth fixes for the 4.9 kernel: - Fix to btwilink driver probe function return value - Power management fix to hci_bcm - Fix to encoding name in scan response data Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23net: fec: Call swap_buffer() prior to IP header alignmentFabio Estevam
Commit 3ac72b7b63d5 ("net: fec: align IP header in hardware") breaks networking on mx28. There is an erratum on mx28 (ENGR121613 - ENET big endian mode not compatible with ARM little endian) that requires an additional byte-swap operation to workaround this problem. So call swap_buffer() prior to performing the IP header alignment to restore network functionality on mx28. Fixes: 3ac72b7b63d5 ("net: fec: align IP header in hardware") Reported-and-tested-by: Henri Roosen <henri.roosen@ginzinger.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23bnx2x: Use the correct divisor value for PHC clock readings.Sudarsana Reddy Kalluru
Time Sync (PTP) implementation uses the divisor/shift value for converting the clock ticks to nanoseconds. Driver currently defines shift value as 1, this results in the nanoseconds value to be calculated as half the actual value. Hence the user application fails to synchronize the device clock value with the PTP master device clock. Need to use the 'shift' value of 0. Signed-off-by: Sony.Chacko <Sony.Chacko@cavium.com> Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23iio: accel: sca3000_core: avoid potentially uninitialized variableArnd Bergmann
The newly added __sca3000_get_base_freq function handles all valid modes of the SCA3000_REG_ADDR_MODE register, but gcc notices that any other value (i.e. 0x00) causes the base_freq variable to not get initialized: drivers/staging/iio/accel/sca3000_core.c: In function 'sca3000_write_raw': drivers/staging/iio/accel/sca3000_core.c:527:23: error: 'base_freq' may be used uninitialized in this function [-Werror=maybe-uninitialized] This adds explicit error handling for unexpected register values, to ensure this cannot happen. Fixes: e0f3fc9b47e6 ("iio: accel: sca3000_core: implemented IIO_CHAN_INFO_SAMP_FREQ") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Ico Doornekamp <ico@pruts.nl> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big ↵Sandhya Bankar
endian value This will result in a random value being reported on big endian architectures. (thanks to Lars-Peter Clausen for pointing out the effects of this bug) Only effects a value printed to the log, but as this reports the settings of the probe in question it may be of direct interest to users. Also, fixes the following sparse endianness warnings: drivers/iio/chemical/atlas-ph-sensor.c:215:9: warning: cast to restricted __be16 drivers/iio/chemical/atlas-ph-sensor.c:215:9: warning: cast to restricted __be16 drivers/iio/chemical/atlas-ph-sensor.c:215:9: warning: cast to restricted __be16 drivers/iio/chemical/atlas-ph-sensor.c:215:9: warning: cast to restricted __be16 drivers/iio/chemical/atlas-ph-sensor.c:215:9: warning: cast to restricted __be16 drivers/iio/chemical/atlas-ph-sensor.c:215:9: warning: cast to restricted __be16 drivers/iio/chemical/atlas-ph-sensor.c:215:9: warning: cast to restricted __be16 drivers/iio/chemical/atlas-ph-sensor.c:215:9: warning: cast to restricted __be16 Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com> Fixes: e8dd92bfbff25 ("iio: chemical: atlas-ph-sensor: add EC feature") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-22qede: Fix incorrrect usage of APIs for un-mapping DMA memoryManish Chopra
Driver uses incorrect APIs to unmap DMA memory which were mapped using dma_map_single(). This patch fixes it to use appropriate APIs for un-mapping DMA memory. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22qed: Zero-out the buffer paased to dcbx_query() APISudarsana Reddy Kalluru
qed_dcbx_query_params() implementation populate the values to input buffer based on the dcbx mode and, the current negotiated state/params, the caller of this API need to memset the buffer to zero. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22qede: Reconfigure rss indirection direction table when rss count is updatedSudarsana Reddy Kalluru
Rx indirection table entries are in the range [0, (rss_count - 1)]. If user reduces the rss count, the table entries may not be in the ccorrect range. Need to reconfigure the table with new rss_count as a basis. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22qed*: Reduce the memory footprint for Rx pathSudarsana Reddy Kalluru
With the current default values for Rx path i.e., 8 queues of 8Kb entries each with 4Kb size, interface will consume 256Mb for Rx. The default values causing the driver probe to fail when the system memory is low. Based on the perforamnce results, rx-ring count value of 1Kb gives the comparable performance with Rx coalesce timeout of 12 seconds. Updating the default values. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22qede: Loopback implementation should ignore the normal trafficSudarsana Reddy Kalluru
During the execution of loopback test, driver may receive the packets which are not originated by this test, loopback implementation need to skip those packets. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22qede: Do not allow RSS config for 100G devicesSudarsana Reddy Kalluru
RSS configuration is not supported for 100G adapters. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22qede: get_channels() need to populate max tx/rx coalesce valuesSudarsana Reddy Kalluru
Recent changes in kernel ethtool implementation requires the driver callback for get_channels() has to populate the values for max tx/rx coalesce fields. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22net: dsa: bcm_sf2: Do not rely on kexec_in_progressFlorian Fainelli
After discussing with Eric, it turns out that, while using kexec_in_progress is a nice optimization, which prevents us from always powering on the integrated PHY, let's just turn it on in the shutdown path. This removes a dependency on kexec_in_progress which, according to Eric should not be used by modules Fixes: 2399d6143f85 ("net: dsa: bcm_sf2: Prevent GPHY shutdown for kexec'd kernels") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "This updates contains: - A revert which addresses a boot failure on ARM Sun5i platforms - A new clocksource driver, which has been delayed beyond rc1 due to an interrupt driver issue which was unearthed by this driver. The debugging of that issue and the discussion about the proper solution made this driver miss the merge window. There is no point in delaying it for a full cycle as it completes the basic mainline support for the new JCore platform and does not create any risk outside of that platform" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "clocksource/drivers/timer_sun5i: Replace code by clocksource_mmio_init" clocksource: Add J-Core timer/clocksource driver of: Add J-Core timer bindings
2016-10-22Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "Mostly irqchip driver fixes, plus a symbol export" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kernel/irq: Export irq_set_parent() irqchip/gic: Add missing \n to CPU IF adjustment message irqchip/jcore: Don't show Kconfig menu item for driver irqchip/eznps: Drop pointless static qualifier in nps400_of_init() irqchip/gic-v3-its: Fix entry size mask for GITS_BASER irqchip/gic-v3-its: Fix 64bit GIC{R,ITS}_TYPER accesses
2016-10-22Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "Add Ard Biesheuvel as EFI co-maintainer, plus fix an ARM build bug with older toolchains" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/arm: Fix absolute relocation detection for older toolchains MAINTAINERS: Add myself as EFI maintainer
2016-10-22Merge tag 'usb-serial-4.9-rc2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.9-rc2 Here's a fix for a NULL-deref during probe which could be triggered by a malicious device, and a fix for some missing error handling in cp210x that also leaked some bits from the stack. Included is also a new device id for ftdi_sio. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-10-22reset: uniphier: rename MIO reset to SD reset for Pro5, PXs2, LD20 SoCsMasahiro Yamada
I made a mistake as for naming for this block. The MIO block is not implemented for these 3 SoCs in the first place. The current naming will be a trouble if an SoC with both MIO and SD-ctrl blocks appear in the future. This driver has just been merged in the previous merge window. Rename it before the release. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-10-22drm: RIP mode_config->rotation_propertyVille Syrjälä
Now that all drivers have been converted over to the per-plane rotation property, we can just nuke the global rotation property. v2: Rebase due to BIT(),__builtin_ffs() & co. Deal with superfluous code shuffling Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1477077768-4274-4-git-send-email-ville.syrjala@linux.intel.com
2016-10-22drm/msm/mdp5: Advertize 180 degree rotationVille Syrjälä
Since the hardware can apparently do both X and Y reflection, we can advertize also 180 degree rotation as thats just X+Y reflection. v2: Drop the BIT() Cc: Rob Clark <robdclark@gmail.com> Cc: Jilai Wang <jilaiw@codeaurora.org> Cc: Archit Taneja <architt@codeaurora.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1477077768-4274-3-git-send-email-ville.syrjala@linux.intel.com
generated by cgit (git 2.34.1) at 2025-09-22 15:38:36 +0000