summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-01-24platform/x86: apple-gmux: Move port defines to apple-gmux.hHans de Goede
This is a preparation patch for adding a new static inline apple_gmux_detect() helper which actually checks a supported gmux is present, rather then only checking an ACPI device with the HID is there as apple_gmux_present() does. Fixes: 21245df307cb ("ACPI: video: Add Apple GMUX brightness control detection") Link: https://lore.kernel.org/platform-driver-x86/20230123113750.462144-1-hdegoede@redhat.com/ Reported-by: Emmanouil Kouroupakis <kartebi@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230124105754.62167-2-hdegoede@redhat.com
2023-01-24platform/x86: hp-wmi: Fix cast to smaller integer type warningHans de Goede
Fix the following compiler warning: drivers/platform/x86/hp/hp-wmi.c:551:24: warning: cast to smaller integer type 'enum hp_wmi_radio' from 'void *' [-Wvoid-pointer-to-enum-cast] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230123132824.660062-1-hdegoede@redhat.com
2023-01-24platform/x86/amd: pmc: Add a module parameter to disable workaroundsMario Limonciello
Some users may want to live with the bugs that exist in platform firmware and have workarounds in AMD PMC driver. To allow them to bypass these workarounds, introduce a module parameter. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20230120191519.15926-2-mario.limonciello@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-24platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZNMario Limonciello
By default when the system is configured for low power idle in the FADT the keyboard is set up as a wake source. This matches the behavior that Windows uses for Modern Standby as well. It has been reported that a variety of AMD based designs there are spurious wakeups are happening where two IRQ sources are active. For example: ``` PM: Triggering wakeup from IRQ 9 PM: Triggering wakeup from IRQ 1 ``` In these designs IRQ 9 is the ACPI SCI and IRQ 1 is the keyboard. One way to trigger this problem is to suspend the laptop and then unplug the AC adapter. The SOC will be in a hardware sleep state and plugging in the AC adapter returns control to the kernel's s2idle loop. Normally if just IRQ 9 was active the s2idle loop would advance any EC transactions and no other IRQ being active would cause the s2idle loop to put the SOC back into hardware sleep state. When this bug occurred IRQ 1 is also active even if no keyboard activity occurred. This causes the s2idle loop to break and the system to wake. This is a platform firmware bug triggering IRQ1 without keyboard activity. This occurs in Windows as well, but Windows will enter "SW DRIPS" and then with no activity enters back into "HW DRIPS" (hardware sleep state). This issue affects Renoir, Lucienne, Cezanne, and Barcelo platforms. It does not happen on newer systems such as Mendocino or Rembrandt. It's been fixed in newer platform firmware. To avoid triggering the bug on older systems check the SMU F/W version and adjust the policy at suspend time for s2idle wakeup from keyboard on these systems. A lot of thought and experimentation has been given around the timing of disabling IRQ1, and to make it work the "suspend" PM callback is restored. Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reported-by: Xaver Hugl <xaver.hugl@gmail.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2115 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1951 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20230120191519.15926-1-mario.limonciello@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-24platform/x86: asus-wmi: Fix kbd_dock_devid tablet-switch reportingHans de Goede
Commit 1ea0d3b46798 ("platform/x86: asus-wmi: Simplify tablet-mode-switch handling") unified the asus-wmi tablet-switch handling, but it did not take into account that the value returned for the kbd_dock_devid WMI method is inverted where as the other ones are not inverted. This causes asus-wmi to report an inverted tablet-switch state for devices which use the kbd_dock_devid, which causes libinput to ignore touchpad events while the affected T10x model 2-in-1s are docked. Add inverting of the return value in the kbd_dock_devid case to fix this. Fixes: 1ea0d3b46798 ("platform/x86: asus-wmi: Simplify tablet-mode-switch handling") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230120143441.527334-1-hdegoede@redhat.com
2023-01-24platform/x86: gigabyte-wmi: add support for B450M DS3H WIFI-CFKevin Kuriakose
To the best of my knowledge this is the same board as the B450M DS3H-CF, but with an added WiFi card. Name obtained using dmidecode, tested with force_load on v6.1.6 Signed-off-by: Kevin Kuriakose <kevinmkuriakose@gmail.com> Acked-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20230119150925.31962-1-kevinmkuriakose@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-24platform/x86: hp-wmi: Handle Omen Key eventRishit Bansal
Add support to map the "HP Omen Key" to KEY_PROG2. Laptops in the HP Omen Series open the HP Omen Command Center application on windows. But, on linux it fails with the following message from the hp-wmi driver: [ 5143.415714] hp_wmi: Unknown event_id - 29 - 0x21a5 Also adds support to map Fn+Esc to KEY_FN_ESC. This currently throws the following message on the hp-wmi driver: [ 6082.143785] hp_wmi: Unknown key code - 0x21a7 There is also a "Win-Lock" key on HP Omen Laptops which supports Enabling and Disabling the Windows key, which trigger commands 0x21a4 and 0x121a4 respectively, but I wasn't able to find any KEY in input.h to map this to. Signed-off-by: Rishit Bansal <rishitbansal0@gmail.com> Link: https://lore.kernel.org/r/20230120221214.24426-1-rishitbansal0@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-24platform/x86: dell-wmi: Add a keymap for KEY_MUTE in type 0x0010 tableKoba Ko
Some platforms send the speaker-mute key from EC. dell-wmi can't recognize it. Add a new keymap for KEY_MUTE in type 0x0010 table. Signed-off-by: Koba Ko <koba.ko@canonical.com> Link: https://lore.kernel.org/r/20230117123436.200440-1-koba.ko@canonical.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-24drm/i915: update src and dst scaler limits for display ver 12 and 13Luca Coelho
The bspec has been updated and now display versions 12 and 13 support source width up to 5120 pixels, source height up to 8192 lines, destination width up to 8192 and destination height up to 8192. Update the code accordingly. BSpec: 50441 Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230113113905.130405-1-luciano.coelho@intel.com
2023-01-24drm/fb-helper: Use a per-driver FB deferred I/O handlerJavier Martinez Canillas
The DRM fbdev emulation layer sets the struct fb_info .fbdefio field to a struct fb_deferred_io pointer, that is shared across all drivers that use the generic drm_fbdev_generic_setup() helper function. It is a problem because the fbdev core deferred I/O logic assumes that the struct fb_deferred_io data is not shared between devices, and it's stored there state such as the list of pages touched and a mutex that is use to synchronize between the fb_deferred_io_track_page() function that track the dirty pages and fb_deferred_io_work() workqueue handler doing the actual deferred I/O. The latter can lead to the following error, since it may happen that two drivers are probed and then one is removed, which causes the mutex bo be destroyed and not existing anymore by the time the other driver tries to grab it for the fbdev deferred I/O logic: [ 369.756553] ------------[ cut here ]------------ [ 369.756604] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 369.756631] WARNING: CPU: 2 PID: 1023 at kernel/locking/mutex.c:582 __mutex_lock+0x348/0x424 [ 369.756744] Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ip v6 nf_defrag_ipv4 ip_set nf_tables nfnetlink qrtr btsdio bluetooth sunrpc brcmfmac snd_soc_hdmi_codec cpufreq_dt cfg80211 vfat fat vc4 rfkill brcmutil raspberrypi_cpufreq i2c_bcm2835 iproc_rng200 bcm2711_thermal snd_soc_core snd_pcm_dmaen gine leds_gpio nvmem_rmem joydev hid_cherry uas usb_storage gpio_raspberrypi_exp v3d snd_pcm raspberrypi_hwmon gpu_sched bcm2835_wdt broadcom bcm_phy_lib snd_timer genet snd mdio_bcm_unimac clk_bcm2711_dvp soundcore drm_display_helper pci e_brcmstb cec ip6_tables ip_tables fuse [ 369.757400] CPU: 2 PID: 1023 Comm: fbtest Not tainted 5.19.0-rc6+ #94 [ 369.757455] Hardware name: raspberrypi,4-model-b Raspberry Pi 4 Model B Rev 1.4/Raspberry Pi 4 Model B Rev 1.4, BIOS 2022.10 10/01/2022 [ 369.757538] pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 369.757596] pc : __mutex_lock+0x348/0x424 [ 369.757635] lr : __mutex_lock+0x348/0x424 [ 369.757672] sp : ffff80000953bb00 [ 369.757703] x29: ffff80000953bb00 x28: ffff17fdc087c000 x27: 0000000000000002 [ 369.757771] x26: ffff17fdc349f9b0 x25: fffffc5ff72e0100 x24: 0000000000000000 [ 369.757838] x23: 0000000000000000 x22: 0000000000000002 x21: ffffa618df636f10 [ 369.757903] x20: ffff80000953bb68 x19: ffffa618e0f18138 x18: 0000000000000001 [ 369.757968] x17: 0000000020000000 x16: 0000000000000002 x15: 0000000000000000 [ 369.758032] x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 5f534b434f4c5f47 [ 369.758097] x11: 00000000ffffdfff x10: ffffa618e0c79f88 x9 : ffffa618de472484 [ 369.758162] x8 : 000000000002ffe8 x7 : c0000000ffffdfff x6 : 00000000000affa8 [ 369.758227] x5 : 0000000000001fff x4 : 0000000000000000 x3 : 0000000000000027 [ 369.758292] x2 : 0000000000000001 x1 : ffff17fdc087c000 x0 : 0000000000000028 [ 369.758357] Call trace: [ 369.758383] __mutex_lock+0x348/0x424 [ 369.758420] mutex_lock_nested+0x4c/0x5c [ 369.758459] fb_deferred_io_mkwrite+0x78/0x1d8 [ 369.758507] do_page_mkwrite+0x5c/0x19c [ 369.758550] wp_page_shared+0x70/0x1a0 [ 369.758590] do_wp_page+0x3d0/0x510 [ 369.758628] handle_pte_fault+0x1c0/0x1e0 [ 369.758670] __handle_mm_fault+0x250/0x380 [ 369.758712] handle_mm_fault+0x17c/0x3a4 [ 369.758753] do_page_fault+0x158/0x530 [ 369.758792] do_mem_abort+0x50/0xa0 [ 369.758831] el0_da+0x78/0x19c [ 369.758864] el0t_64_sync_handler+0xbc/0x150 [ 369.758904] el0t_64_sync+0x190/0x194 [ 369.758942] irq event stamp: 11395 [ 369.758973] hardirqs last enabled at (11395): [<ffffa618de472554>] __up_console_sem+0x74/0x80 [ 369.759042] hardirqs last disabled at (11394): [<ffffa618de47254c>] __up_console_sem+0x6c/0x80 [ 369.760554] softirqs last enabled at (11392): [<ffffa618de330a74>] __do_softirq+0x4c4/0x6b8 [ 369.762060] softirqs last disabled at (11383): [<ffffa618de3c9124>] __irq_exit_rcu+0x104/0x214 [ 369.763564] ---[ end trace 0000000000000000 ]--- Fixes: d536540f304c ("drm/fb-helper: Add generic fbdev emulation .fb_probe function") Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230121192418.2814955-4-javierm@redhat.com
2023-01-24drm/fb-helper: Check fb_deferred_io_init() return valueJavier Martinez Canillas
The fb_deferred_io_init() can fail and return an errno code but currently there is no check for its return value. Fix that and propagate to errno to the caller in the case of a failure. Fixes: d536540f304c ("drm/fb-helper: Add generic fbdev emulation .fb_probe function") Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230121192418.2814955-3-javierm@redhat.com
2023-01-24drm/ssd130x: Silence a `dubious: x & !y` warningJavier Martinez Canillas
The sparse tool complains with the following warning: $ make M=drivers/gpu/drm/solomon/ C=2 CC [M] drivers/gpu/drm/solomon/ssd130x.o CHECK drivers/gpu/drm/solomon/ssd130x.c drivers/gpu/drm/solomon/ssd130x.c:363:21: warning: dubious: x & !y This seems to be a false positive in my opinion but still we can silence the tool while making the code easier to read. Let's also add a comment, to explain why the "com_seq" logical not is used rather than its value. Reported-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230121190930.2804224-1-javierm@redhat.com
2023-01-24fbdev: Remove unused struct fb_deferred_io .first_io fieldJavier Martinez Canillas
This optional callback was added in the commit 1f45f9dbb392 ("fb_defio: add first_io callback") but it was never used by a driver. Let's remove it since it's unlikely that will be used after a decade that was added. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230121192418.2814955-2-javierm@redhat.com
2023-01-23Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-01-20 (iavf) This series contains updates to iavf driver only. Michal Schmidt converts single iavf workqueue to per adapter to avoid deadlock issues. Marcin moves setting of VLAN related netdev features to watchdog task to avoid RTNL deadlock. Stefan Assmann schedules immediate watchdog task execution on changing primary MAC to avoid excessive delay. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: schedule watchdog immediately when changing primary MAC iavf: Move netdev_update_features() into watchdog task iavf: fix temporary deadlock and failure to set MAC address ==================== Link: https://lore.kernel.org/r/20230120211036.430946-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-23net: ethernet: adi: adin1110: Fix multicast offloadingAlexandru Tachici
Driver marked broadcast/multicast frames as offloaded incorrectly. Mark them as offloaded only when HW offloading has been enabled. This should happen only for ADIN2111 when both ports are bridged by the software. Fixes: bc93e19d088b ("net: ethernet: adi: Add ADIN1110 support") Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230120090846.18172-1-alexandru.tachici@analog.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-23net: dsa: microchip: fix probe of I2C-connected KSZ8563Ahmad Fatoum
Starting with commit eee16b147121 ("net: dsa: microchip: perform the compatibility check for dev probed"), the KSZ switch driver now bails out if it thinks the DT compatible doesn't match the actual chip ID read back from the hardware: ksz9477-switch 1-005f: Device tree specifies chip KSZ9893 but found KSZ8563, please fix it! For the KSZ8563, which used ksz_switch_chips[KSZ9893], this was fine at first, because it indeed shares the same chip id as the KSZ9893. Commit b44908095612 ("net: dsa: microchip: add separate struct ksz_chip_data for KSZ8563 chip") started differentiating KSZ9893 compatible chips by consulting the 0x1F register. The resulting breakage was fixed for the SPI driver in the same commit by introducing the appropriate ksz_switch_chips[KSZ8563], but not for the I2C driver. Fix this for I2C-connected KSZ8563 now to get it probing again. Fixes: b44908095612 ("net: dsa: microchip: add separate struct ksz_chip_data for KSZ8563 chip"). Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230120110933.1151054-1-a.fatoum@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-24drm: rcar-du: Stop accessing non-existent registers on gen4Tomi Valkeinen
The following registers do not exist on gen4, so we should not write them: DEF6Rm, DEF7Rm, DEF8Rm, ESCRn, OTARn. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2023-01-24drm: rcar-du: Fix setting a reserved bit in DPLLCRTomi Valkeinen
On H3 ES1.x two bits in DPLLCR are used to select the DU input dot clock source. These are bits 20 and 21 for DU2, and bits 22 and 23 for DU1. On non-ES1.x, only the higher bits are used (bits 21 and 23), and the lower bits are reserved and should be set to 0. The current code always sets the lower bits, even on non-ES1.x. For both DU1 and DU2, on all SoC versions, when writing zeroes to those bits the input clock is DCLKIN, and thus there's no difference between ES1.x and non-ES1.x. For DU1, writing 0b10 to the bits (or only writing the higher bit) results in using PLL0 as the input clock, so in this case there's also no difference between ES1.x and non-ES1.x. However, for DU2, writing 0b10 to the bits results in using PLL0 as the input clock on ES1.x, whereas on non-ES1.x it results in using PLL1. On ES1.x you need to write 0b11 to select PLL1. The current code always writes 0b11 to PLCS0 field to select PLL1 on all SoC versions, which works but causes an illegal (in the sense of not allowed by the documentation) write to a reserved bit field. To remove the illegal bit write on PLSC0 we need to handle the input dot clock selection differently for ES1.x and non-ES1.x. Add a new quirk, RCAR_DU_QUIRK_H3_ES1_PLL, for this. This way we can always set the bit 21 on PLSC0 when choosing the PLL as the source clock, and additionally set the bit 20 when on ES1.x. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2023-01-24drm: rcar-du: Add quirk for H3 ES1.x pclk workaroundTomi Valkeinen
rcar_du_crtc.c does a soc_device_match() in rcar_du_crtc_set_display_timing() to find out if the SoC is H3 ES1.x, and if so, apply a workaround. We will need another H3 ES1.x check in the following patch, so rather than adding more soc_device_match() calls, let's add a rcar_du_device_info entry for the ES1, and a quirk flag, RCAR_DU_QUIRK_H3_ES1_PCLK_STABILITY, for the workaround. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2023-01-24drm: rcar-du: lvds: Fix stop sequenceKoji Matsuoka
According to hardware manual, LVDCR0 register must be cleared bit by bit when disabling LVDS. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com> [tomi.valkeinen: simplified the code a bit] Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2023-01-23ACPI: video: Add backlight=native DMI quirk for Asus U46EHans de Goede
The Asus U46E backlight tables have a set of interesting problems: 1. Its ACPI tables do make _OSI ("Windows 2012") checks, so acpi_osi_is_win8() should return true. But the tables have 2 sets of _OSI calls, one from the usual global _INI method setting a global OSYS variable and a second set of _OSI calls from a MSOS method and the MSOS method is the only one calling _OSI ("Windows 2012"). The MSOS method only gets called in the following cases: 1. From some Asus specific WMI methods 2. From _DOD, which only runs after acpi_video_get_backlight_type() has already been called by the i915 driver 3. From other ACPI video bus methods which never run (see below) 4. From some EC query callbacks So when i915 calls acpi_video_get_backlight_type() MSOS has never run and acpi_osi_is_win8() returns false, so acpi_video_get_backlight_type() returns acpi_video as the desired backlight type, which causes the intel_backlight device to not register. 2. _DOD effectively does this: Return (Package (0x01) { 0x0400 }) causing acpi_video_device_in_dod() to return false, which causes the acpi_video backlight device to not register. Leaving the user with no backlight device at all. Note that before 6.1.y the i915 driver would register the intel_backlight device unconditionally and since that then was the only backlight device userspace would use that. Add a backlight=native DMI quirk for this special laptop to restore the old (and working) behavior of the intel_backlight device registering. Fixes: fb1836c91317 ("ACPI: video: Prefer native over vendor") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-23ACPI: video: Add backlight=native DMI quirk for HP EliteBook 8460pHans de Goede
The HP EliteBook 8460p predates Windows 8, so it defaults to using acpi_video# for backlight control. Starting with the 6.1.y kernels the native radeon_bl0 backlight is hidden in this case instead of relying on userspace preferring acpi_video# over native backlight devices. It turns out that for the acpi_video# interface to work on the HP EliteBook 8460p, the brightness needs to be set at least once through the native interface, which now no longer is done breaking backlight control. The native interface however always works without problems, so add a quirk to use native backlight on the EliteBook 8460p to fix this. Fixes: fb1836c91317 ("ACPI: video: Prefer native over vendor") Link: https://bugzilla.redhat.com/show_bug.cgi?id=2161428 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-23ACPI: video: Add backlight=native DMI quirk for HP Pavilion g6-1d80nrHans de Goede
The HP Pavilion g6-1d80nr predates Windows 8, so it defaults to using acpi_video# for backlight control, but this is non functional on this model. Add a DMI quirk to use the native backlight interface which does work properly. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-23Merge tag 'vfio-v6.2-rc6' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO fixes from Alex Williamson: - Honor reserved regions when testing for IOMMU find grained super page support, avoiding a regression on s390 for a firmware device where the existence of the mapping, even if unused can trigger an error state. (Niklas Schnelle) - Fix a deadlock in releasing KVM references by using the alternate .release() rather than .destroy() callback for the kvm-vfio device. (Yi Liu) * tag 'vfio-v6.2-rc6' of https://github.com/awilliam/linux-vfio: kvm/vfio: Fix potential deadlock on vfio group_lock vfio/type1: Respect IOMMU reserved regions in vfio_test_domain_fgsp()
2023-01-23drm/i915/selftest: fix intel_selftest_modify_policy argument typesArnd Bergmann
The definition of intel_selftest_modify_policy() does not match the declaration, as gcc-13 points out: drivers/gpu/drm/i915/selftests/intel_scheduler_helpers.c:29:5: error: conflicting types for 'intel_selftest_modify_policy' due to enum/integer mismatch; have 'int(struct intel_engine_cs *, struct intel_selftest_saved_policy *, u32)' {aka 'int(struct intel_engine_cs *, struct intel_selftest_saved_policy *, unsigned int)'} [-Werror=enum-int-mismatch] 29 | int intel_selftest_modify_policy(struct intel_engine_cs *engine, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/gpu/drm/i915/selftests/intel_scheduler_helpers.c:11: drivers/gpu/drm/i915/selftests/intel_scheduler_helpers.h:28:5: note: previous declaration of 'intel_selftest_modify_policy' with type 'int(struct intel_engine_cs *, struct intel_selftest_saved_policy *, enum selftest_scheduler_modify)' 28 | int intel_selftest_modify_policy(struct intel_engine_cs *engine, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ Change the type in the definition to match. Fixes: 617e87c05c72 ("drm/i915/selftest: Fix hangcheck self test for GuC submission") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230117163743.1003219-1-arnd@kernel.org (cherry picked from commit 8d7eb8ed3f83f248e01a4f548d9c500a950a2c2d) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-01-23drm/i915/mtl: Fix bcs default contextLucas De Marchi
Commit 0d0e7d1eea9e ("drm/i915/mtl: Define engine context layouts") added the engine context for Meteor Lake. In a second revision of the patch it was believed the xcs offsets were wrong due to a tagging issue in the spec. The first version was actually correct, as shown by the intel_lrc_live_selftests/live_lrc_layout test: i915: Running gt_lrc i915: Running intel_lrc_live_selftests/live_lrc_layout bcs0: LRI command mismatch at dword 1, expected 1108101d found 11081019 [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] disconnected bcs0: HW register image: [0000] 00000000 1108101d 00022244 ffff0008 00022034 00000088 00022030 00000088 ... bcs0: SW register image: [0000] 00000000 11081019 00022244 00090009 00022034 00000000 00022030 00000000 The difference in the 2 additional dwords (0x1d vs 0x19) are the offsets 0x120 / 0x124 that are indeed part of the context image. Bspec: 45585 Fixes: 0d0e7d1eea9e ("drm/i915/mtl: Define engine context layouts") Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230111235531.3353815-2-radhakrishna.sripada@intel.com (cherry picked from commit ca54a9a32da0f0ef7e5cbcd111b66f3c9d78b7d2) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-01-23nvme-fc: fix initialization orderRoss Lagerwall
ctrl->ops is used by nvme_alloc_admin_tag_set() but set by nvme_init_ctrl() so reorder the calls to avoid a NULL pointer dereference. Fixes: 6dfba1c09c10 ("nvme-fc: use the tagset alloc/free helpers") Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-01-23drm: rcar-du: lvds: Add reset controlTomi Valkeinen
Reset LVDS using the reset control as CPG reset/release is required in the hardware manual sequence. Based on a BSP patch from Koji Matsuoka <koji.matsuoka.xm@renesas.com>. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2023-01-23drm: rcar-du: lvds: Add runtime PMTomi Valkeinen
Add simple runtime PM suspend and resume functionality. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2023-01-23drm: rcar-du: dsi: Add 'select RESET_CONTROLLER'Tomi Valkeinen
The RCAR DSI driver uses reset controller, so we should select it in the Kconfig. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2023-01-23gpiolib-acpi: Don't set GPIOs for wakeup in S3 modeMario Limonciello
commit 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable") adjusted the policy to enable wakeup by default if the ACPI tables indicated that a device was wake capable. It was reported however that this broke suspend on at least two System76 systems in S3 mode and two Lenovo Gen2a systems, but only with S3. When the machines are set to s2idle, wakeup behaves properly. Configuring the GPIOs for wakeup with S3 doesn't work properly, so only set it when the system supports low power idle. Fixes: 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable") Fixes: b38f2d5d9615c ("i2c: acpi: Use ACPI wake capability bit to set wake_irq") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2357 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2162013 Reported-by: Nathan Smythe <ncsmythe@scruboak.org> Tested-by: Nathan Smythe <ncsmythe@scruboak.org> Suggested-by: Raul Rangel <rrangel@chromium.org> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-23drm/format-helper: Support the AB24/XB24 formatsThierry Reding
Add a conversion helper for the AB24 and XB24 formats to use in drm_fb_blit(). Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-7-thierry.reding@gmail.com
2023-01-23drm/simpledrm: Add support for system memory framebuffersThierry Reding
Simple framebuffers can be set up in system memory, which cannot be requested and/or I/O remapped using the I/O resource helpers. Add a separate code path that obtains system memory framebuffers from the reserved memory region referenced in the memory-region property. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-6-thierry.reding@gmail.com
2023-01-23drm/simpledrm: Use struct iosys_map consistentlyThierry Reding
The majority of the driver already uses struct iosys_map to encapsulate accesses to I/O remapped vs. system memory. Accesses via the screen base pointer still use __iomem annotations, which can lead to inconsistencies and conflicts with subsequent patches. Convert the screen base to a struct iosys_map as well for consistency and to avoid these issues. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-5-thierry.reding@gmail.com
2023-01-23net: fec: Use page_pool_put_full_page when freeing rx buffersWei Fang
The page_pool_release_page was used when freeing rx buffers, and this function just unmaps the page (if mapped) and does not recycle the page. So after hundreds of down/up the eth0, the system will out of memory. For more details, please refer to the following reproduce steps and bug logs. To solve this issue and refer to the doc of page pool, the page_pool_put_full_page should be used to replace page_pool_release_page. Because this API will try to recycle the page if the page refcnt equal to 1. After testing 20000 times, the issue can not be reproduced anymore (about testing 391 times the issue will occur on i.MX8MN-EVK before). Reproduce steps: Create the test script and run the script. The script content is as follows: LOOPS=20000 i=1 while [ $i -le $LOOPS ] do echo "TINFO:ENET $curface up and down test $i times" org_macaddr=$(cat /sys/class/net/eth0/address) ifconfig eth0 down ifconfig eth0 hw ether $org_macaddr up i=$(expr $i + 1) done sleep 5 if cat /sys/class/net/eth0/operstate | grep 'up';then echo "TEST PASS" else echo "TEST FAIL" fi Bug detail logs: TINFO:ENET up and down test 391 times [ 850.471205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 853.535318] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 853.541694] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 870.590531] page_pool_release_retry() stalled pool shutdown 199 inflight 60 sec [ 931.006557] page_pool_release_retry() stalled pool shutdown 199 inflight 120 sec TINFO:ENET up and down test 392 times [ 991.426544] page_pool_release_retry() stalled pool shutdown 192 inflight 181 sec [ 1051.838531] page_pool_release_retry() stalled pool shutdown 170 inflight 241 sec [ 1093.751217] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 1096.446520] page_pool_release_retry() stalled pool shutdown 308 inflight 60 sec [ 1096.831245] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 1096.839092] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1112.254526] page_pool_release_retry() stalled pool shutdown 103 inflight 302 sec [ 1156.862533] page_pool_release_retry() stalled pool shutdown 308 inflight 120 sec [ 1172.674516] page_pool_release_retry() stalled pool shutdown 103 inflight 362 sec [ 1217.278532] page_pool_release_retry() stalled pool shutdown 308 inflight 181 sec TINFO:ENET up and down test 393 times [ 1233.086535] page_pool_release_retry() stalled pool shutdown 103 inflight 422 sec [ 1277.698513] page_pool_release_retry() stalled pool shutdown 308 inflight 241 sec [ 1293.502525] page_pool_release_retry() stalled pool shutdown 86 inflight 483 sec [ 1338.110518] page_pool_release_retry() stalled pool shutdown 308 inflight 302 sec [ 1353.918540] page_pool_release_retry() stalled pool shutdown 32 inflight 543 sec [ 1361.179205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 1364.255298] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 1364.263189] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1371.998532] page_pool_release_retry() stalled pool shutdown 310 inflight 60 sec [ 1398.530542] page_pool_release_retry() stalled pool shutdown 308 inflight 362 sec [ 1414.334539] page_pool_release_retry() stalled pool shutdown 16 inflight 604 sec [ 1432.414520] page_pool_release_retry() stalled pool shutdown 310 inflight 120 sec [ 1458.942523] page_pool_release_retry() stalled pool shutdown 308 inflight 422 sec [ 1474.750521] page_pool_release_retry() stalled pool shutdown 16 inflight 664 sec TINFO:ENET up and down test 394 times [ 1492.830522] page_pool_release_retry() stalled pool shutdown 310 inflight 181 sec [ 1519.358519] page_pool_release_retry() stalled pool shutdown 308 inflight 483 sec [ 1535.166545] page_pool_release_retry() stalled pool shutdown 2 inflight 724 sec [ 1537.090278] eth_test2.sh invoked oom-killer: gfp_mask=0x400dc0(GFP_KERNEL_ACCOUNT|__GFP_ZERO), order=0, oom_score_adj=0 [ 1537.101192] CPU: 3 PID: 2379 Comm: eth_test2.sh Tainted: G C 6.1.1+g56321e101aca #1 [ 1537.110249] Hardware name: NXP i.MX8MNano EVK board (DT) [ 1537.115561] Call trace: [ 1537.118005] dump_backtrace.part.0+0xe0/0xf0 [ 1537.122289] show_stack+0x18/0x40 [ 1537.125608] dump_stack_lvl+0x64/0x80 [ 1537.129276] dump_stack+0x18/0x34 [ 1537.132592] dump_header+0x44/0x208 [ 1537.136083] oom_kill_process+0x2b4/0x2c0 [ 1537.140097] out_of_memory+0xe4/0x594 [ 1537.143766] __alloc_pages+0xb68/0xd00 [ 1537.147521] alloc_pages+0xac/0x160 [ 1537.151013] __get_free_pages+0x14/0x40 [ 1537.154851] pgd_alloc+0x1c/0x30 [ 1537.158082] mm_init+0xf8/0x1d0 [ 1537.161228] mm_alloc+0x48/0x60 [ 1537.164368] alloc_bprm+0x7c/0x240 [ 1537.167777] do_execveat_common.isra.0+0x70/0x240 [ 1537.172486] __arm64_sys_execve+0x40/0x54 [ 1537.176502] invoke_syscall+0x48/0x114 [ 1537.180255] el0_svc_common.constprop.0+0xcc/0xec [ 1537.184964] do_el0_svc+0x2c/0xd0 [ 1537.188280] el0_svc+0x2c/0x84 [ 1537.191340] el0t_64_sync_handler+0xf4/0x120 [ 1537.195613] el0t_64_sync+0x18c/0x190 [ 1537.199334] Mem-Info: [ 1537.201620] active_anon:342 inactive_anon:10343 isolated_anon:0 [ 1537.201620] active_file:54 inactive_file:112 isolated_file:0 [ 1537.201620] unevictable:0 dirty:0 writeback:0 [ 1537.201620] slab_reclaimable:2620 slab_unreclaimable:7076 [ 1537.201620] mapped:1489 shmem:2473 pagetables:466 [ 1537.201620] sec_pagetables:0 bounce:0 [ 1537.201620] kernel_misc_reclaimable:0 [ 1537.201620] free:136672 free_pcp:96 free_cma:129241 [ 1537.240419] Node 0 active_anon:1368kB inactive_anon:41372kB active_file:216kB inactive_file:5052kB unevictable:0kB isolated(anon):0kB isolated(file):0kB s [ 1537.271422] Node 0 DMA free:541636kB boost:0kB min:30000kB low:37500kB high:45000kB reserved_highatomic:0KB active_anon:1368kB inactive_anon:41372kB actiB [ 1537.300219] lowmem_reserve[]: 0 0 0 0 [ 1537.303929] Node 0 DMA: 1015*4kB (UMEC) 743*8kB (UMEC) 417*16kB (UMEC) 235*32kB (UMEC) 116*64kB (UMEC) 25*128kB (UMEC) 4*256kB (UC) 2*512kB (UC) 0*1024kBB [ 1537.323938] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB [ 1537.332708] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=32768kB [ 1537.341292] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB [ 1537.349776] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=64kB [ 1537.358087] 2939 total pagecache pages [ 1537.361876] 0 pages in swap cache [ 1537.365229] Free swap = 0kB [ 1537.368147] Total swap = 0kB [ 1537.371065] 516096 pages RAM [ 1537.373959] 0 pages HighMem/MovableOnly [ 1537.377834] 17302 pages reserved [ 1537.381103] 163840 pages cma reserved [ 1537.384809] 0 pages hwpoisoned [ 1537.387902] Tasks state (memory values in pages): [ 1537.392652] [ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name [ 1537.401356] [ 201] 993 201 1130 72 45056 0 0 rpcbind [ 1537.409772] [ 202] 0 202 4529 1640 77824 0 -250 systemd-journal [ 1537.418861] [ 222] 0 222 4691 801 69632 0 -1000 systemd-udevd [ 1537.427787] [ 248] 994 248 20914 130 65536 0 0 systemd-timesyn [ 1537.436884] [ 497] 0 497 620 31 49152 0 0 atd [ 1537.444938] [ 500] 0 500 854 77 53248 0 0 crond [ 1537.453165] [ 503] 997 503 1470 160 49152 0 -900 dbus-daemon [ 1537.461908] [ 505] 0 505 633 24 40960 0 0 firmwared [ 1537.470491] [ 513] 0 513 2507 180 61440 0 0 ofonod [ 1537.478800] [ 514] 990 514 69640 137 81920 0 0 parsec [ 1537.487120] [ 533] 0 533 599 39 40960 0 0 syslogd [ 1537.495518] [ 534] 0 534 4546 148 65536 0 0 systemd-logind [ 1537.504560] [ 535] 0 535 690 24 45056 0 0 tee-supplicant [ 1537.513564] [ 540] 996 540 2769 168 61440 0 0 systemd-network [ 1537.522680] [ 566] 0 566 3878 228 77824 0 0 connmand [ 1537.531168] [ 645] 998 645 1538 133 57344 0 0 avahi-daemon [ 1537.540004] [ 646] 998 646 1461 64 57344 0 0 avahi-daemon [ 1537.548846] [ 648] 992 648 781 41 45056 0 0 rpc.statd [ 1537.557415] [ 650] 64371 650 590 23 45056 0 0 ninfod [ 1537.565754] [ 653] 61563 653 555 24 45056 0 0 rdisc [ 1537.573971] [ 655] 0 655 374569 2999 290816 0 -999 containerd [ 1537.582621] [ 658] 0 658 1311 20 49152 0 0 agetty [ 1537.590922] [ 663] 0 663 1529 97 49152 0 0 login [ 1537.599138] [ 666] 0 666 3430 202 69632 0 0 wpa_supplicant [ 1537.608147] [ 667] 0 667 2344 96 61440 0 0 systemd-userdbd [ 1537.617240] [ 677] 0 677 2964 314 65536 0 100 systemd [ 1537.625651] [ 679] 0 679 3720 646 73728 0 100 (sd-pam) [ 1537.634138] [ 687] 0 687 1289 403 45056 0 0 sh [ 1537.642108] [ 789] 0 789 970 93 45056 0 0 eth_test2.sh [ 1537.650955] [ 2355] 0 2355 2346 94 61440 0 0 systemd-userwor [ 1537.660046] [ 2356] 0 2356 2346 94 61440 0 0 systemd-userwor [ 1537.669137] [ 2358] 0 2358 2346 95 57344 0 0 systemd-userwor [ 1537.678258] [ 2379] 0 2379 970 93 45056 0 0 eth_test2.sh [ 1537.687098] oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0,global_oom,task_memcg=/user.slice/user-0.slice/user@0.service,tas0 [ 1537.703009] Out of memory: Killed process 679 ((sd-pam)) total-vm:14880kB, anon-rss:2584kB, file-rss:0kB, shmem-rss:0kB, UID:0 pgtables:72kB oom_score_ad0 [ 1553.246526] page_pool_release_retry() stalled pool shutdown 310 inflight 241 sec Fixes: 95698ff6177b ("net: fec: using page pool to manage RX buffers") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: shenwei wang <Shenwei.wang@nxp.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-23drm/edid: remove redundant _drm_connector_update_edid_property()Jani Nikula
Realize that drm_edid_connector_update() and _drm_connector_update_edid_property() are now the same thing. Drop the latter. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/712cc299afe33d8f6279a15d5b0117aeeab88bb4.1674144945.git.jani.nikula@intel.com
2023-01-23drm/edid: add separate drm_edid_connector_add_modes()Jani Nikula
The original goal with drm_edid_connector_update() was to have a single call for updating the connector and adding probed modes, in this order, but that turned out to be problematic. Drivers that need to update the connector in the .detect() callback would end up updating the probed modes as well. Turns out the callback may be called so many times that the probed mode list fills up without bounds, and this is amplified by add_alternate_cea_modes() duplicating the CEA modes on every call, actually running out of memory on some machines. Kudos to Imre Deak <imre.deak@intel.com> for explaining this to me. Go back to having separate drm_edid_connector_update() and drm_edid_connector_add_modes() calls. The former may be called from .detect(), .force(), or .get_modes(), but the latter only from .get_modes(). Unlike drm_add_edid_modes(), have drm_edid_connector_add_modes() update the probed modes from the EDID property instead of the passed in EDID. This is mainly to enforce two things: 1) drm_edid_connector_update() must be called before drm_edid_connector_add_modes(). Display info and quirks are needed for parsing the modes, and we don't want to call update_display_info() again to ensure the info is available, like drm_add_edid_modes() does. 2) The same EDID is used for both updating the connector and adding the probed modes. Fortunately, the change is easy, because no driver has actually adopted drm_edid_connector_update(). Not even i915, and that's mainly because of the problem described above. Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e86fff1579f14ebf6334692526c8f6831cd02cac.1674144945.git.jani.nikula@intel.com
2023-01-23drm/edid: refactor _drm_edid_connector_update() and renameJani Nikula
By moving update_display_info() out of _drm_edid_connector_update() we make the function purely about adding modes. Rename accordingly. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e9880bbb2b5724d9aac88a90a31ba3ba9af9da3f.1674144945.git.jani.nikula@intel.com
2023-01-23drm/edid: split HDMI VSDB info and mode parsingJani Nikula
Separate the parsing of display info and modes from the HDMI VSDB. This is prerequisite work for overall better separation of the two parsing steps. The info parsing is about figuring out whether the sink supports HDMI infoframes. Since they were added in HDMI 1.4, assume the sink supports HDMI infoframes if it has the HDMI_Video_present bit set (introduced in HDMI 1.4). For details, see commit f1781e9bb2dd ("drm/edid: Allow HDMI infoframe without VIC or S3D"). The logic is not exactly the same, but since it was somewhat heuristic to begin with, assume this is close enough. v2: - Simplify to only check HDMI_Video_present bit (Ville) - Drop cea_db_raw_size() helper (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/238e15f7ab15a86f7fd1812271dcaec9bc6e1506.1674144945.git.jani.nikula@intel.com
2023-01-23drm/bridge: fsl-ldb: Add i.MX93 LDB supportLiu Ying
Same to i.MX8mp LDB, i.MX93 LDB is controlled by mediamix blk-ctrl through LDB_CTRL and LVDS_CTRL registers. i.MX93 LDB supports only one LVDS channel(channel 0) and it's LVDS_CTRL register bit1 is used as LVDS_EN instead of CH1_EN. Add i.MX93 LDB support in the existing i.MX8mp LDB bridge driver by adding i.MX93 LDB compatible string and device data(to reflect different register offsets and LVDS_CTRL register bit1 definition). Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230123021449.969243-3-victor.liu@nxp.com
2023-01-22Merge tag 'edac_urgent_for_v6.2_rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fixes from Borislav Petkov: - Respect user-supplied polling value in the EDAC device code - Fix a use-after-free issue in qcom_edac * tag 'edac_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/qcom: Do not pass llcc_driv_data as edac_device_ctl_info's pvt_info EDAC/device: Respect any driver-supplied workqueue polling value
2023-01-22drm/panel: Add driver for the AUO A030JTN01 TFT LCDChristophe Branchereau
Add driver for the AUO A030JTN01 panel, which is a 320x480 3.0" 4:3 24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit interface. Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230121162419.284523-3-cbranchereau@gmail.com
2023-01-21Merge tag 'char-misc-6.2-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char/misc and other subsystem driver fixes for 6.2-rc5 to resolve a few reported issues. They include: - long time pending fastrpc fixes (should have gone into 6.1, my fault) - mei driver/bus fixes and new device ids - interconnect driver fixes for reported problems - vmci bugfix - w1 driver bugfixes for reported problems Almost all of these have been in linux-next with no reported problems, the rest have all passed 0-day bot testing in my tree and on the mailing lists where they have sat too long due to me taking a long time to catch up on my pending patch queue" * tag 'char-misc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: VMCI: Use threaded irqs instead of tasklets misc: fastrpc: Pass bitfield into qcom_scm_assign_mem gsmi: fix null-deref in gsmi_get_variable misc: fastrpc: Fix use-after-free race condition for maps misc: fastrpc: Don't remove map on creater_process and device_release misc: fastrpc: Fix use-after-free and race in fastrpc_map_find misc: fastrpc: fix error code in fastrpc_req_mmap() mei: me: add meteor lake point M DID mei: bus: fix unlink on bus in error path w1: fix WARNING after calling w1_process() w1: fix deadloop in __w1_remove_master_device() comedi: adv_pci1760: Fix PWM instruction handling interconnect: qcom: rpm: Use _optional func for provider clocks interconnect: qcom: msm8996: Fix regmap max_register values interconnect: qcom: msm8996: Provide UFS clocks to A2NoC dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC
2023-01-21Merge tag 'driver-core-6.2-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are three small driver and kernel core fixes for 6.2-rc5. They include: - potential gadget fixup in do_prlimit - device property refcount leak fix - test_async_probe bugfix for reported problem" * tag 'driver-core-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: prlimit: do_prlimit needs to have a speculation check driver core: Fix test_async_probe_init saves device in wrong array device property: fix of node refcount leak in fwnode_graph_get_next_endpoint()
2023-01-21Merge tag 'staging-6.2-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fix from Greg KH: "Here is a single staging driver fix for 6.2-rc5. It resolves a build issue reported and Fixed by Arnd in the vc04_services driver. It's been in linux-next this week with no reported problems" * tag 'staging-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: vchiq_arm: fix enum vchiq_status return types
2023-01-21Merge tag 'tty-6.2-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for 6.2-rc5 that resolve a number of tiny reported issues and some new device ids. They include: - new device id for the exar serial driver - speakup tty driver bugfix - atmel serial driver baudrate fixup - stm32 serial driver bugfix and then revert as the bugfix broke the build. That will come back in a later pull request once it is all worked out properly. - amba-pl011 serial driver rs486 mode bugfix - qcom_geni serial driver bugfix Most of these have been in linux-next with no reported problems (well, other than the build breakage which generated the revert), the new device id passed 0-day testing" * tag 'tty-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: exar: Add support for Sealevel 7xxxC serial cards Revert "serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler" tty: serial: qcom_geni: avoid duplicate struct member init serial: atmel: fix incorrect baudrate setup tty: fix possible null-ptr-defer in spk_ttyio_release serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler serial: amba-pl011: fix high priority character transmission in rs486 mode serial: pch_uart: Pass correct sg to dma_unmap_sg() tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer
2023-01-21Merge tag 'usb-6.2-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt fixes from Greg KH: "Here are a number of small USB and Thunderbolt driver fixes and new device id changes for 6.2-rc5. Included in here are: - thunderbolt bugfixes for reported problems - new usb-serial driver ids added - onboard_hub usb driver fixes for much-reported problems - xhci bugfixes - typec bugfixes - ehci-fsl driver module alias fix - iowarrior header size fix - usb gadget driver fixes All of these, except for the iowarrior fix, have been in linux-next with no reported issues. The iowarrior fix passed the 0-day testing and is a one digit change based on a reported problem in the driver (which was written to a spec, not the real device that is now available)" * tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits) USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100 usb: host: ehci-fsl: Fix module alias usb: dwc3: fix extcon dependency usb: core: hub: disable autosuspend for TI TUSB8041 USB: fix misleading usb_set_intfdata() kernel doc usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate() USB: gadget: Add ID numbers to configfs-gadget driver names usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail usb: gadget: g_webcam: Send color matching descriptor per frame usb: typec: altmodes/displayport: Use proper macro for pin assignment check usb: typec: altmodes/displayport: Fix pin assignment calculation usb: typec: altmodes/displayport: Add pin assignment helper usb: gadget: f_fs: Ensure ep0req is dequeued before free_request usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait usb: misc: onboard_hub: Move 'attach' work to the driver usb: misc: onboard_hub: Invert driver registration order usb: ucsi: Ensure connector delayed work items are flushed usb: musb: fix error return code in omap2430_probe() usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch) xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables ...
2023-01-20net: ethernet: renesas: rswitch: Fix ethernet-ports handlingYoshihiro Shimoda
If one of ports in the ethernet-ports was disabled, this driver failed to probe all ports. So, fix it. Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20230120001959.1059850-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-20net: mana: Fix IRQ name - add PCI and queue numberHaiyang Zhang
The PCI and queue number info is missing in IRQ names. Add PCI and queue number to IRQ names, to allow CPU affinity tuning scripts to work. Cc: stable@vger.kernel.org Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/1674161950-19708-1-git-send-email-haiyangz@microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-20Merge tag 'gpio-fixes-for-v6.2-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix a potential race condition and always set GPIOs used as interrupt source to input in gpio-mxc - fix a GPIO ACPI-related issue with system suspend on Clevo NL5xRU * tag 'gpio-fixes-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xRU gpiolib: acpi: Allow ignoring wake capability on pins that aren't in _AEI gpio: mxc: Always set GPIOs used as interrupt source to INPUT mode gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock
generated by cgit (git 2.34.1) at 2025-09-12 16:35:33 +0000