summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-01-17HID: check empty report_list in hid_validate_values()Pietro Borrello
Add a check for empty report_list in hid_validate_values(). The missing check causes a type confusion when issuing a list_entry() on an empty report_list. The problem is caused by the assumption that the device must have valid report_list. While this will be true for all normal HID devices, a suitably malicious device can violate the assumption. Fixes: 1b15d2e5b807 ("HID: core: fix validation of report id 0") Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-01-17net: mdio: validate parameter addr in mdiobus_get_phy()Heiner Kallweit
The caller may pass any value as addr, what may result in an out-of-bounds access to array mdio_map. One existing case is stmmac_init_phy() that may pass -1 as addr. Therefore validate addr before using it. Fixes: 7f854420fbfe ("phy: Add API for {un}registering an mdio device to a bus.") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/cdf664ea-3312-e915-73f8-021678d08887@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-17net: usb: sr9700: Handle negative lenSzymon Heidrich
Packet len computed as difference of length word extracted from skb data and four may result in a negative value. In such case processing of the buffer should be interrupted rather than setting sr_skb->len to an unexpectedly large value (due to cast from signed to unsigned integer) and passing sr_skb to usbnet_skb_return. Fixes: e9da0b56fe27 ("sr9700: sanity check for packet length") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Link: https://lore.kernel.org/r/20230114182326.30479-1-szymon.heidrich@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-17drm/ttm: Include <linux/vmalloc.h> to fix MIPS buildThomas Zimmermann
On MIPS, vmap() and vunmap() are undeclared in ttm_bo_util.c. An error message is shown below. CC drivers/gpu/drm/ttm/ttm_bo_util.o ../drivers/gpu/drm/ttm/ttm_bo_util.c: In function 'ttm_bo_kmap_ttm': ../drivers/gpu/drm/ttm/ttm_bo_util.c:364:32: error: implicit declaration of function 'vmap'; did you mean 'kmap'? [-Werror=implicit-function-declaration] 364 | map->virtual = vmap(ttm->pages + start_page, num_pages, | ^~~~ | kmap ../drivers/gpu/drm/ttm/ttm_bo_util.c:364:30: warning: assignment to 'void *' from 'int' makes pointer from integer without a cast [-Wint-conversion] 364 | map->virtual = vmap(ttm->pages + start_page, num_pages, | ^ ../drivers/gpu/drm/ttm/ttm_bo_util.c: In function 'ttm_bo_kunmap': ../drivers/gpu/drm/ttm/ttm_bo_util.c:429:17: error: implicit declaration of function 'vunmap'; did you mean 'kunmap'? [-Werror=implicit-function-declaration] 429 | vunmap(map->virtual); | ^~~~~~ | kunmap ../drivers/gpu/drm/ttm/ttm_bo_util.c: In function 'ttm_bo_vmap': ../drivers/gpu/drm/ttm/ttm_bo_util.c:509:23: warning: assignment to 'void *' from 'int' makes pointer from integer without a cast [-Wint-conversion] 509 | vaddr = vmap(ttm->pages, ttm->num_pages, 0, prot); | ^ Fix this by including <linux/vmalloc.h>. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230116121023.14245-1-tzimmermann@suse.de
2023-01-17Merge tag 'drm-intel-next-2023-01-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 feature pull #1 for v6.3: Features and functionality: - Meteorlake display enabling (Animesh, Luca, Stan, Jouni, Anusha) - DP MST DSC support (Stan) - Gamma/degamma readout support for the state checker (Ville) - Enable SDP split support for DP 2.0 (Vinod) - Add probe blocking support to i915.force_probe parameter (Rodrigo) - Enable Xe HP 4tile support (Jonathan) Refactoring and cleanups: - Color refactoring, especially related to DSB usage (Ville) - DSB refactoring (Ville) - DVO refactoring (Ville) - Backlight register and logging cleanups (Jani) - Avoid display direct calls to uncore (Maarten, Jani) - Add new "soc" sub-directory (Jani) - Refactor DSC platform support checks (Swati) Fixes: - Interlace modes are no longer supported starting at display version 12 (Ankit) - Use polling read for aux control (Arun) - DMC firmware no longer requires specific versions (Gustavo) - Fix PSR flickering and freeze issues (Jouni) - Fix ICL+ DSI GPIO handling (Jani) - Ratelimit errors in display engine irqs (Lucas) - Fix DP MST DSC bpp and timeslot calculations (Stan) - Fix CDCLK squash and crawl sequences (Ville, Anusha) - Fix bigjoiner checks for fused pipes (Ville) - Fix ADP+ degamma LUT size (Ville) - Fix DVO ch7xxx and sil164 suspend/resume (Ville) - Fix memory leak in VBT parsing (Xia Fukun) - Fix VBT packet port selection for dual link DSI (Mikko Kovanen) - Fix SDP infoframe product string for discrete graphics (Clint) - Fix VLV/CHV HDMI/DP audio enable (Ville) - Fix VRR delays and calculations (Ville) - No longer disable transcoder for PHY test pattern change (Khaled) - Fix dual PPS handling (Ville) - Fix timeout and wait for DDI BUF CTL active after enabling (Ankit) Merges: - Backmerge drm-next to sync up with v6.2-rc1 (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87tu0wez34.fsf@intel.com
2023-01-16drm/nouveau/fb/ga102: Replace zero-length array of trailing structs with ↵Kees Cook
flex-array Zero-length arrays are deprecated[1] and are being replaced with flexible array members in support of the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy(), correctly instrument array indexing with UBSAN_BOUNDS, and to globally enable -fstrict-flex-arrays=3. Replace zero-length array with flexible-array member. This results in no differences in binary output. [1] https://github.com/KSPP/linux/issues/78 Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Gourav Samaiya <gsamaiya@nvidia.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230103234835.never.378-kees@kernel.org
2023-01-16pktcdvd: check for NULL returna fter calling bio_split_to_limits()Jens Axboe
The revert of the removal of this driver happened after we fixed up the split limits for NOWAIT issue, hence it got missed. Ensure that we check for a NULL bio after splitting, in case it should be retried. Marking this as fixing both commits, so that stable backport will do this correctly. Cc: stable@vger.kernel.org Fixes: 9cea62b2cbab ("block: don't allow splitting of a REQ_NOWAIT bio") Fixes: 4b83e99ee709 ("Revert "pktcdvd: remove driver."") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-16tty: serial: kgdboc: fix mutex locking order for configure_kgdboc()John Ogness
Several mutexes are taken while setting up console serial ports. In particular, the tty_port->mutex and @console_mutex are taken: serial_pnp_probe serial8250_register_8250_port uart_add_one_port (locks tty_port->mutex) uart_configure_port register_console (locks @console_mutex) In order to synchronize kgdb's tty_find_polling_driver() with register_console(), commit 6193bc90849a ("tty: serial: kgdboc: synchronize tty_find_polling_driver() and register_console()") takes the @console_mutex. However, this leads to the following call chain (with locking): platform_probe kgdboc_probe configure_kgdboc (locks @console_mutex) tty_find_polling_driver uart_poll_init (locks tty_port->mutex) uart_set_options This is clearly deadlock potential due to the reverse lock ordering. Since uart_set_options() requires holding @console_mutex in order to serialize early initialization of the serial-console lock, take the @console_mutex in uart_poll_init() instead of configure_kgdboc(). Since configure_kgdboc() was using @console_mutex for safe traversal of the console list, change it to use the SRCU iterator instead. Add comments to uart_set_options() kerneldoc mentioning that it requires holding @console_mutex (aka the console_list_lock). Fixes: 6193bc90849a ("tty: serial: kgdboc: synchronize tty_find_polling_driver() and register_console()") Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> [pmladek@suse.com: Export console_srcu_read_lock_is_held() to fix build kgdboc as a module.] Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20230112161213.1434854-1-john.ogness@linutronix.de
2023-01-16wifi: mt76: dma: fix a regression in adding rx buffersFelix Fietkau
When adding WED support, mt76_dma_add_buf was accidentally changed to set the skip_buf0 flag for tx buffers on the wrong queue descriptor entry. Additionally, there is a rxwi leak when rx buffer allocation fails. Fix this and make the code more readable by adding a separate function for adding rx buffers. Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Link: https://lore.kernel.org/r/CABXGCsMEnQd=gYKTd1knRsWuxCb=Etv5nAre%2BXJS_s5FgVteYA@mail.gmail.com/ Reported-by: Mike Lothian <mike@fireburn.co.uk> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216829 Reported-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/lkml/20230112171706.294550-1-angelogioacchino.delregno@collabora.com/ Fixes: cd372b8c99c5 ("wifi: mt76: add WED RX support to mt76_dma_{add,get}_buf") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230113105848.34642-3-nbd@nbd.name
2023-01-16wifi: mt76: handle possible mt76_rx_token_consume failuresLorenzo Bianconi
Take into account possible error conditions of mt76_rx_token_consume routine in mt7915_mmio_wed_init_rx_buf() and mt76_dma_add_buf() Fixes: cd372b8c99c5 ("wifi: mt76: add WED RX support to mt76_dma_{add,get}_buf") Fixes: 4f831d18d12d ("wifi: mt76: mt7915: enable WED RX support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 96f134dc19645be4994e89a2f68fa89309becbee) Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230113105848.34642-2-nbd@nbd.name
2023-01-16wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf failsLorenzo Bianconi
Do not increment queue head if mt76_dma_add_buf fails for Wireless Ethernet Dispatcher rx queues. Fixes: cd372b8c99c5 ("wifi: mt76: add WED RX support to mt76_dma_{add,get}_buf") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit fe13dad8992be0b26c1be390bcd111acf9892c17) Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230113105848.34642-1-nbd@nbd.name
2023-01-16octeontx2-pf: Avoid use of GFP_KERNEL in atomic contextGeetha sowjanya
Using GFP_KERNEL in preemption disable context, causing below warning when CONFIG_DEBUG_ATOMIC_SLEEP is enabled. [ 32.542271] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274 [ 32.550883] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 [ 32.558707] preempt_count: 1, expected: 0 [ 32.562710] RCU nest depth: 0, expected: 0 [ 32.566800] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 6.2.0-rc2-00269-gae9dcb91c606 #7 [ 32.576188] Hardware name: Marvell CN106XX board (DT) [ 32.581232] Call trace: [ 32.583670] dump_backtrace.part.0+0xe0/0xf0 [ 32.587937] show_stack+0x18/0x30 [ 32.591245] dump_stack_lvl+0x68/0x84 [ 32.594900] dump_stack+0x18/0x34 [ 32.598206] __might_resched+0x12c/0x160 [ 32.602122] __might_sleep+0x48/0xa0 [ 32.605689] __kmem_cache_alloc_node+0x2b8/0x2e0 [ 32.610301] __kmalloc+0x58/0x190 [ 32.613610] otx2_sq_aura_pool_init+0x1a8/0x314 [ 32.618134] otx2_open+0x1d4/0x9d0 To avoid use of GFP_ATOMIC for memory allocation, disable preemption after all memory allocation is done. Fixes: 4af1b64f80fb ("octeontx2-pf: Fix lmtst ID used in aura free") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16net: stmmac: Fix queue statistics readingKurt Kanzenbach
Correct queue statistics reading. All queue statistics are stored as unsigned long values. The retrieval for ethtool fetches these values as u64. However, on some systems the size of the counters are 32 bit. That yields wrong queue statistic counters e.g., on arm32 systems such as the stm32mp157. Fix it by using the correct data type. Tested on Olimex STMP157-OLinuXino-LIME2 by simple running linuxptp for a short period of time: Non-patched kernel: |root@st1:~# ethtool -S eth0 | grep q0 | q0_tx_pkt_n: 3775276254951 # ??? | q0_tx_irq_n: 879 | q0_rx_pkt_n: 1194000908909 # ??? | q0_rx_irq_n: 278 Patched kernel: |root@st1:~# ethtool -S eth0 | grep q0 | q0_tx_pkt_n: 2434 | q0_tx_irq_n: 1274 | q0_rx_pkt_n: 1604 | q0_rx_irq_n: 846 Fixes: 68e9c5dee1cf ("net: stmmac: add ethtool per-queue statistic framework") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Cc: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Cc: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-16drm/bridge: tc358767: Set default CLRSIPO countMarek Vasut
The current CLRSIPO count is still marginal and does not work with high DSI clock rates in burst mode. Increase it further to allow the DSI link to work at up to 1Gbps lane speed. This returns the counts to defaults as provided by datasheet. Fixes: ea6490b02240b ("drm/bridge: tc358767: increase CLRSIPO count") Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221016003556.406441-1-marex@denx.de
2023-01-16pinctrl: rockchip: fix reading pull type on rk3568Jonas Karlman
When reading pinconf-pins from debugfs it fails to get the configured pull type on RK3568, "unsupported pinctrl type" error messages is also reported. Fix this by adding support for RK3568 in rockchip_get_pull, including a reverse of the pull-up value swap applied in rockchip_set_pull so that pull-up is correctly reported in pinconf-pins. Also update the workaround comment to reflect affected pins, GPIO0_D3-D6. Fixes: c0dadc0e47a8 ("pinctrl: rockchip: add support for rk3568") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jianqun Xu <jay.xu@rock-chips.com> Link: https://lore.kernel.org/r/20230110172955.1258840-1-jonas@kwiboo.se Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-01-16wifi: rndis_wlan: Prevent buffer overflow in rndis_query_oidSzymon Heidrich
Since resplen and respoffs are signed integers sufficiently large values of unsigned int len and offset members of RNDIS response will result in negative values of prior variables. This may be utilized to bypass implemented security checks to either extract memory contents by manipulating offset or overflow the data buffer via memcpy by manipulating both offset and len. Additionally assure that sum of resplen and respoffs does not overflow so buffer boundaries are kept. Fixes: 80f8c5b434f9 ("rndis_wlan: copy only useful data from rndis_command respond") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230111175031.7049-1-szymon.heidrich@gmail.com
2023-01-16wifi: brcmfmac: fix regression for Broadcom PCIe wifi devicesArend van Spriel
A sanity check was introduced considering maximum flowrings above 256 as insane and effectively aborting the device probe. This resulted in regression for number of users as the value turns out to be sane after all. Fixes: 2aca4f3734bd ("brcmfmac: return error when getting invalid max_flowrings from dongle") Reported-by: chainofflowers <chainofflowers@posteo.net> Link: https://lore.kernel.org/all/4781984.GXAFRqVoOG@luna/ Reported-by: Christian Marillat <marillat@debian.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216894 Cc: stable@vger.kernel.org Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230111112419.24185-1-arend.vanspriel@broadcom.com
2023-01-16wifi: brcmfmac: avoid NULL-deref in survey dump for 2G only deviceArend van Spriel
When dealing with a device for 2GHz band only the wiphy->bands for 5GHz will be NULL. This would result in a NULL-deref in the brcmf_cfg80211_dump_survey() function. Rework the code with a for-loop to make it easier to add another band. Fixes: 6c04deae1438 ("brcmfmac: Add dump_survey cfg80211 ops for HostApd AutoChannelSelection") Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230103124117.271988-3-arend.vanspriel@broadcom.com
2023-01-16wifi: brcmfmac: avoid handling disabled channels for survey dumpArend van Spriel
An issue was reported in which periodically error messages are printed in the kernel log: [ 26.303445] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 26.303554] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.bin failed with error -2 [ 26.516752] brcmfmac_wcc: brcmf_wcc_attach: executing [ 26.528264] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [ 27.076829] Bluetooth: hci0: BCM: features 0x2f [ 27.078592] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+ [ 27.078601] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0342 [ 30.142104] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SS [ 30.590017] Bluetooth: MGMT ver 1.22 [ 104.897615] brcmfmac: cfg80211_set_channel: set chanspec 0x100e fail, reason -52 [ 104.897992] brcmfmac: cfg80211_set_channel: set chanspec 0xd022 fail, reason -52 [ 105.007672] brcmfmac: cfg80211_set_channel: set chanspec 0xd026 fail, reason -52 [ 105.117654] brcmfmac: cfg80211_set_channel: set chanspec 0xd02a fail, reason -52 [ 105.227636] brcmfmac: cfg80211_set_channel: set chanspec 0xd02e fail, reason -52 [ 106.987552] brcmfmac: cfg80211_set_channel: set chanspec 0xd090 fail, reason -52 [ 106.987911] brcmfmac: cfg80211_set_channel: set chanspec 0xd095 fail, reason -52 [ 106.988233] brcmfmac: cfg80211_set_channel: set chanspec 0xd099 fail, reason -52 [ 106.988565] brcmfmac: cfg80211_set_channel: set chanspec 0xd09d fail, reason -52 [ 106.988909] brcmfmac: cfg80211_set_channel: set chanspec 0xd0a1 fail, reason -52 This happens in brcmf_cfg80211_dump_survey() because we try a disabled channel. When channel is marked as disabled we do not need to fill any other info so bail out. Fixes: 6c04deae1438 ("brcmfmac: Add dump_survey cfg80211 ops for HostApd AutoChannelSelection") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230103124117.271988-2-arend.vanspriel@broadcom.com
2023-01-16gpio: mxc: Always set GPIOs used as interrupt source to INPUT modeMarek Vasut
Always configure GPIO pins which are used as interrupt source as INPUTs. In case the default pin configuration is OUTPUT, or the prior stage does configure the pins as OUTPUT, then Linux will not reconfigure the pin as INPUT and no interrupts are received. Always configure the interrupt source GPIO pin as input to fix the above case. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Fixes: 07bd1a6cc7cbb ("MXC arch: Add gpio support for the whole platform") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-16gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlockMarek Vasut
The driver currently performs register read-modify-write without locking in its irqchip part, this could lead to a race condition when configuring interrupt mode setting. Add the missing bgpio spinlock lock/unlock around the register read-modify-write. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Fixes: 07bd1a6cc7cbb ("MXC arch: Add gpio support for the whole platform") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-16drm/i915/display: drop redundant display/ from #includesJani Nikula
Drop the redundant sub-directory from #includes under display/. Group and sort the results. v2: Rebase Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230104153258.453431-1-jani.nikula@intel.com
2023-01-16USB: serial: option: add Quectel EM05CN modemDuke Xin(辛安文)
The EM05CN modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "MBIM" : AT + MBIM + DIAG + NMEA + MODEM "RMNET" : AT + DIAG + NMEA + Modem + QMI The detailed description of the USB configuration for each mode as follows: MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0312 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0312 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16USB: serial: option: add Quectel EM05CN (SG) modemDuke Xin(辛安文)
The EM05CN (SG) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "MBIM" : AT + MBIM + DIAG + NMEA + MODEM "RMNET" : AT + DIAG + NMEA + Modem + QMI The detailed description of the USB configuration for each mode as follows: MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0310 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0310 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16USB: serial: cp210x: add SCALANCE LPE-9000 device idMichael Adler
Add the USB serial console device ID for Siemens SCALANCE LPE-9000 which have a USB port for their serial console. Signed-off-by: Michael Adler <michael.adler@siemens.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16USB: serial: option: add Quectel EC200U modemAli Mirghasemi
Add support for EC200U modem 0x0901: EC200U - AT + AP + CP + NMEA + DIAG + MOS usb-device output: T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0901 Rev= 3.18 S: Manufacturer=Android S: Product=Android C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 512 Ivl=4096ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 512 Ivl=4096ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Ali Mirghasemi <ali.mirghasemi1376@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16USB: serial: option: add Quectel EM05-G (RS) modemDuke Xin(辛安文)
The EM05-G (RS) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0314 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0314 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-16Merge tag 'drm-misc-next-2023-01-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.3: UAPI Changes: * fourcc: Document Open Source user waiver Cross-subsystem Changes: * firmware: fix color-format selection for system framebuffers Core Changes: * format-helper: Add conversion from XRGB8888 to various sysfb formats; Make XRGB8888 the only driver-emulated legacy format * fb-helper: Avoid blank consoles from selecting an incorrect color format * probe-helper: Enable/disable HPD on connectors plus driver updates * Use drm_dbg_ helpers in several places * docs: Document defaults for CRTC backgrounds; Document use of drm_minor Driver Changes: * arm/hdlcd: Use new debugfs helpers * gud: Use new debugfs helpers * panel: Support Visionox VTDR6130 AMOLED DSI; Support Himax HX8394; Convert many drivers to common generic DSI write-sequence helper * v3d: Do not opencode drm_gem_object_lookup() * vc4: Various HVS an CRTC fixes * vkms: Fix SEGFAULT from incorrect GEM-buffer mapping * Convert various drivers to i2c probe_new() Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/Y8ADeSzZDj+tpibF@linux-uq9g
2023-01-16Merge tag 'amd-drm-next-6.3-2023-01-13' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.3-2023-01-13: amdgpu: - Fix possible segfault in failure case - Rework FW requests to happen in early_init for all IPs so that we don't lose the sbios console if FW is missing - PSR fixes - Misc cleanups - Unload fix - SMU13 fixes amdkfd: - Fix for cleared VRAM BOs - Fix cleanup if GPUVM creation fails - Memory accounting fix - Use resource_size rather than open codeing it - GC11 mGPU fix radeon: - Fix memory leak on shutdown Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230113225911.7776-1-alexander.deucher@amd.com
2023-01-16Merge tag 'amd-drm-next-6.3-2023-01-06' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.3-2023-01-06: amdgpu: - secure display support for multiple displays - DML optimizations - DCN 3.2 updates - PSR updates - DP 2.1 updates - SR-IOV RAS updates - VCN RAS support - SMU 13.x updates - Switch 1 element arrays to flexible arrays - Add RAS support for DF 4.3 - Stack size improvements - S0ix rework - Soft reset fix - Allow 0 as a vram limit on APUs - Display fixes - Misc code cleanups - Documentation fixes - Handle profiling modes for SMU13.x amdkfd: - Error handling fixes - PASID fixes radeon: - Switch 1 element arrays to flexible arrays drm: - Add DP adaptive sync DPCD definitions UAPI: - Add new INFO queries for peak and min sclk/mclk for profile modes on newer chips Proposed mesa patch: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/278 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230106222037.7870-1-alexander.deucher@amd.com
2023-01-15Merge tag 'edac_urgent_for_v6.2_rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fixes from Borislav Petkov: - Fix the EDAC device's confusion in the polling setting units - Fix a memory leak in highbank's probing function * tag 'edac_urgent_for_v6.2_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/highbank: Fix memory leak in highbank_mc_probe() EDAC/device: Fix period calculation in edac_device_reset_delay_period()
2023-01-14Merge tag 'iommu-fixes-v6.2-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Core: Fix an iommu-group refcount leak - Fix overflow issue in IOVA alloc path - ARM-SMMU fixes from Will: - Fix VFIO regression on NXP SoCs by reporting IOMMU_CAP_CACHE_COHERENCY - Fix SMMU shutdown paths to avoid device unregistration race - Error handling fix for Mediatek IOMMU driver * tag 'iommu-fixes-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/mediatek-v1: Fix an error handling path in mtk_iommu_v1_probe() iommu/iova: Fix alloc iova overflows issue iommu: Fix refcount leak in iommu_device_claim_dma_owner iommu/arm-smmu-v3: Don't unregister on shutdown iommu/arm-smmu: Don't unregister on shutdown iommu/arm-smmu: Report IOMMU_CAP_CACHE_COHERENCY even betterer
2023-01-14Merge tag 'hardening-v6.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull kernel hardening fixes from Kees Cook: - Fix CFI hash randomization with KASAN (Sami Tolvanen) - Check size of coreboot table entry and use flex-array * tag 'hardening-v6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: kbuild: Fix CFI hash randomization with KASAN firmware: coreboot: Check size of table entry and use flex-array
2023-01-14Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two minor fixes in the hisi_sas driver which only impact enterprise style multi-expander and shared disk situations and no core changes" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: hisi_sas: Set a port invalid only if there are no devices attached when refreshing port id scsi: hisi_sas: Use abort task set to reset SAS disks when discovered
2023-01-14Merge tag 'ata-6.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ATA fix from Damien Le Moal: "A single fix to prevent building the pata_cs5535 driver with user mode linux as it uses msr operations that are not defined with UML" * tag 'ata-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_cs5535: Don't build on UML
2023-01-13net: lan966x: add missing fwnode_handle_put() for ports nodeClément Léger
Since the "ethernet-ports" node is retrieved using device_get_named_child_node(), it should be release after using it. Add missing fwnode_handle_put() and move the code that retrieved the node from device-tree to avoid complicated handling in case of error. Fixes: db8bcaad5393 ("net: lan966x: add the basic lan966x driver") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230112161311.495124-1-clement.leger@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13net: enetc: avoid deadlock in enetc_tx_onestep_tstamp()Vladimir Oltean
This lockdep splat says it better than I could: ================================ WARNING: inconsistent lock state 6.2.0-rc2-07010-ga9b9500ffaac-dirty #967 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kworker/1:3/179 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff3ec4036ce098 (_xmit_ETHER#2){+.?.}-{3:3}, at: netif_freeze_queues+0x5c/0xc0 {IN-SOFTIRQ-W} state was registered at: _raw_spin_lock+0x5c/0xc0 sch_direct_xmit+0x148/0x37c __dev_queue_xmit+0x528/0x111c ip6_finish_output2+0x5ec/0xb7c ip6_finish_output+0x240/0x3f0 ip6_output+0x78/0x360 ndisc_send_skb+0x33c/0x85c ndisc_send_rs+0x54/0x12c addrconf_rs_timer+0x154/0x260 call_timer_fn+0xb8/0x3a0 __run_timers.part.0+0x214/0x26c run_timer_softirq+0x3c/0x74 __do_softirq+0x14c/0x5d8 ____do_softirq+0x10/0x20 call_on_irq_stack+0x2c/0x5c do_softirq_own_stack+0x1c/0x30 __irq_exit_rcu+0x168/0x1a0 irq_exit_rcu+0x10/0x40 el1_interrupt+0x38/0x64 irq event stamp: 7825 hardirqs last enabled at (7825): [<ffffdf1f7200cae4>] exit_to_kernel_mode+0x34/0x130 hardirqs last disabled at (7823): [<ffffdf1f708105f0>] __do_softirq+0x550/0x5d8 softirqs last enabled at (7824): [<ffffdf1f7081050c>] __do_softirq+0x46c/0x5d8 softirqs last disabled at (7811): [<ffffdf1f708166e0>] ____do_softirq+0x10/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(_xmit_ETHER#2); <Interrupt> lock(_xmit_ETHER#2); *** DEADLOCK *** 3 locks held by kworker/1:3/179: #0: ffff3ec400004748 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0 #1: ffff80000a0bbdc8 ((work_completion)(&priv->tx_onestep_tstamp)){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0 #2: ffff3ec4036cd438 (&dev->tx_global_lock){+.+.}-{3:3}, at: netif_tx_lock+0x1c/0x34 Workqueue: events enetc_tx_onestep_tstamp Call trace: print_usage_bug.part.0+0x208/0x22c mark_lock+0x7f0/0x8b0 __lock_acquire+0x7c4/0x1ce0 lock_acquire.part.0+0xe0/0x220 lock_acquire+0x68/0x84 _raw_spin_lock+0x5c/0xc0 netif_freeze_queues+0x5c/0xc0 netif_tx_lock+0x24/0x34 enetc_tx_onestep_tstamp+0x20/0x100 process_one_work+0x28c/0x6c0 worker_thread+0x74/0x450 kthread+0x118/0x11c but I'll say it anyway: the enetc_tx_onestep_tstamp() work item runs in process context, therefore with softirqs enabled (i.o.w., it can be interrupted by a softirq). If we hold the netif_tx_lock() when there is an interrupt, and the NET_TX softirq then gets scheduled, this will take the netif_tx_lock() a second time and deadlock the kernel. To solve this, use netif_tx_lock_bh(), which blocks softirqs from running. Fixes: 7294380c5211 ("enetc: support PTP Sync packet one-step timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230112105440.1786799-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13net: wan: Add checks for NULL for utdm in undo_uhdlc_init and unmap_si_regsEsina Ekaterina
If uhdlc_priv_tsa != 1 then utdm is not initialized. And if ret != NULL then goto undo_uhdlc_init, where utdm is dereferenced. Same if dev == NULL. Found by Astra Linux on behalf of Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 8d68100ab4ad ("soc/fsl/qe: fix err handling of ucc_of_parse_tdm") Signed-off-by: Esina Ekaterina <eesina@astralinux.ru> Link: https://lore.kernel.org/r/20230112074703.13558-1-eesina@astralinux.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13scsi: target: core: Fix warning on RT kernelsMaurizio Lombardi
Calling spin_lock_irqsave() does not disable the interrupts on realtime kernels, remove the warning and replace assert_spin_locked() with lockdep_assert_held(). Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230110125310.55884-1-mlombard@redhat.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-13Merge tag 'block-6.2-2023-01-13' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: "Nothing major in here, just a collection of NVMe fixes and dropping a wrong might_sleep() that static checkers tripped over but which isn't valid" * tag 'block-6.2-2023-01-13' of git://git.kernel.dk/linux: MAINTAINERS: stop nvme matching for nvmem files nvme: don't allow unprivileged passthrough on partitions nvme: replace the "bool vec" arguments with flags in the ioctl path nvme: remove __nvme_ioctl nvme-pci: fix error handling in nvme_pci_enable() nvme-pci: add NVME_QUIRK_IDENTIFY_CNS quirk to Apple T2 controllers nvme-apple: add NVME_QUIRK_IDENTIFY_CNS quirk to fix regression block: Drop spurious might_sleep() from blk_put_queue()
2023-01-13Merge tag 'pci-v6.2-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fixes from Bjorn Helgaas: - Work around apparent firmware issue that made Linux reject MMCONFIG space, which broke PCI extended config space (Bjorn Helgaas) - Fix CONFIG_PCIE_BT1 dependency due to mid-air collision between a PCI_MSI_IRQ_DOMAIN -> PCI_MSI change and addition of PCIE_BT1 (Lukas Bulwahn) * tag 'pci-v6.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: x86/pci: Treat EfiMemoryMappedIO as reservation of ECAM space x86/pci: Simplify is_mmconf_reserved() messages PCI: dwc: Adjust to recent removal of PCI_MSI_IRQ_DOMAIN
2023-01-13firmware: coreboot: Check size of table entry and use flex-arrayKees Cook
The memcpy() of the data following a coreboot_table_entry couldn't be evaluated by the compiler under CONFIG_FORTIFY_SOURCE. To make it easier to reason about, add an explicit flexible array member to struct coreboot_device so the entire entry can be copied at once. Additionally, validate the sizes before copying. Avoids this run-time false positive warning: memcpy: detected field-spanning write (size 168) of single field "&device->entry" at drivers/firmware/google/coreboot_table.c:103 (size 8) Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Link: https://lore.kernel.org/all/03ae2704-8c30-f9f0-215b-7cdf4ad35a9a@molgen.mpg.de/ Cc: Jack Rosenthal <jrosenth@chromium.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Julius Werner <jwerner@chromium.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Link: https://lore.kernel.org/r/20230107031406.gonna.761-kees@kernel.org Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Link: https://lore.kernel.org/r/20230112230312.give.446-kees@kernel.org
2023-01-14ata: pata_cs5535: Don't build on UMLPeter Foley
This driver uses MSR functions that aren't implemented under UML. Avoid building it to prevent tripping up allyesconfig. e.g. /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x3a3): undefined reference to `__tracepoint_read_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x3d2): undefined reference to `__tracepoint_write_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x457): undefined reference to `__tracepoint_write_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x481): undefined reference to `do_trace_write_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x4d5): undefined reference to `do_trace_write_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x4f5): undefined reference to `do_trace_read_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x51c): undefined reference to `do_trace_write_msr' Signed-off-by: Peter Foley <pefoley2@pefoley.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2023-01-13drm/amd/display: add hubbub_init relatedCharlene Liu
Required by display init, also update get_dig_mode Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amd/display: Update dmub header to match DMUBMustapha Ghaddar
[WHY] Last PR missed name of a struct to match in DMUB [HOW] Update the logic in dmub_cmh.h header Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amdgpu: Skip specific mmhub and sdma registers accessing under sriovYifan Zha
[Why] SDMA0_CNTL and MMHUB system aperture related registers are blocked by L1 Policy. Therefore, they cannot be accessed by VF and loged in violation. [How] For MMHUB registers, they will be programmed by PF. So VF will skip to program them in mmhubv3_0. For SDMA0_CNTL which is a PF_only register, VF don't need to program it in sdma_v6_0. Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amd/pm: Support RAS fatal error mode1 reset on smu v13_0_0 and v13_0_10Candice Li
Support RAS fatal error mode1 reset on smu v13_0_0 and v13_0_10. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amdgpu: Correct the power calcultion for Renior/Cezanne.jie1zhan
From smu firmware,the value of power is transferred in units of watts. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2321 Fixes: 137aac26a2ed ("drm/amdgpu/smu12: fix power reporting on renoir") Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Reviewed-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amd: fix some dead code in `gfx_v9_0_init_cp_compute_microcode`Mario Limonciello
Some dead code was introduced as part of utilizing the `amdgpu_ucode_*` helpers. Adjust the control flow to make sure that firmware is released in the appropriate error flows. Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1530548 ("Control flow issues") Fixes: ec787deb2ddf ("drm/amd: Use `amdgpu_ucode_*` helpers for GFX9") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amd/display: move dc_link_dpia logic to link_dp_dpiaWenjing Liu
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-14 13:26:49 +0000