| Age | Commit message (Collapse) | Author |
|---|
|
[why]
Moving dpcd logic from dc_link_dpcd to link_dpcd as part of link file
restructure
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
1. Move dd_link_ddc functions to link_ddc.
2. Move link ddc functions declaration exposed in dc to link.h
3. Move link ddc functions declaration exposed in dm to dc_link.h
4. Remove i2caux_interface.h file
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Factor out hpd handling logic from generic dc link file.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY?]
FIFO enable sequence is incomplete as it is currently implemented in FW,
and requires reset to prevent the FIFO to be enabled in an invalid
state. This cannot be done until DIG FE is connected to the BE.
[HOW?]
Add FIFO enable sequence in driver for dcn32 with reset after DIG FE is
connected to BE.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The DPIA link encoder (DIG) was not released when a Display XDR 6K
monitor was disconnected. That's because the DPIA link encoder logic
checked the BW when it removed the link encoder for it. And the timing
BW was less than DP link BW. So, it failed to release the link encoder.
And that caused the DIG was occupied and can't be used. The reason it
checked the BW is it wants to identify whether this link was using DIG
or HPO. It skips if it's not DIG.
[How]
Not to check the BW when it removes the link encoder because it's
already in the assignment table, it must be the DIG.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A previous fix attempted to correct mismatch between DM display
targets and dc panel instancing by only counting connected panels.
This behaviour breaks a feature, thus this is an alternative solution
that allows mapping display targets to dc links during mod_power_create.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 1b5d0e7e15430aecbf2bb0ac634a44aec971895c.
It caused corruption in some media players.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
After introducing new DPIA NOTIFICATION we will need
to update the exiting BW allocation logic
[HOW]
Updated the BW alloc source and header files
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit fixes memory leakage in dc_construct_ctx() function.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A logical evaluation already results in bool. There is no need for using
a ternary operator based evaluation and bool conversion of the outcome.
Issue identified using boolconv.cocci Coccinelle semantic patch.
This was also reported by the Kernel Test Robot. Hence
Fixes: 473683a03495 ("drm/amd/display: Create a file dedicated for CRTC")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The assignment of the else and if branches is the same, so the if else
here is redundant, so we remove it.
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:1951:2-4: WARNING: possible condition with no effect (if == else).
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3719
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On DCN314 when resuming from s0i3 an ASSERT is shown indicating that
`VBIOSSMC_MSG_SetHardMinDcfclkByFreq` returned `VBIOSSMC_Result_Failed`.
This isn't a driver bug; it's a BIOS/configuration bug. To make this
easier to triage, add an explicit warning when this issue happens.
This matches the behavior utilized for failures with
`VBIOSSMC_MSG_TransferTableDram2Smu` configuration.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Setting scaling does not correctly update CRTC state. As a result
dc stream state's src (composition area) && dest (addressable area)
was not calculated as expected. This causes set scaling doesn's work.
[How]
Correctly update CRTC state when setting scaling property.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: hongao <hongao@uniontech.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It is possible that adev->dm.dc->caps.max_links is greater than
AMDGPU_MAX_CRTCS. So, to not potentially access unallocated memory use
adev->mode_info.num_crtc to do the bounds check instead of
adev->dm.dc->caps.max_links.
Fixes: 1b11ff764aef ("drm/amd/display: Implement multiple secure display")
Fixes: b8ff7e08bab9 ("drm/amd/display: Fix when disabling secure_display")
Reviewed-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Using DEFINE_SIMPLE_ATTRIBUTE macro with the debugfs_create_file()
function adds the overhead of introducing a proxy file operation
functions to wrap the original read/write inside file removal protection
functions. This adds significant overhead in terms of introducing and
managing the proxy factory file operations structure and function
wrapping at runtime.
As a replacement, a combination of DEFINE_DEBUGFS_ATTRIBUTE macro paired
with debugfs_create_file_unsafe() is suggested to be used instead. The
DEFINE_DEBUGFS_ATTRIBUTE utilises debugfs_file_get() and
debugfs_file_put() wrappers to protect the original read and write
function calls for the debug attributes. There is no need for any
runtime proxy file operations to be managed by the debugfs core.
Following coccicheck make command helped identify this change:
make coccicheck M=drivers/gpu/drm/i915/ MODE=patch COCCI=./scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci
Signed-off-by: Deepak R Varma <drv@mailo.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5d26e924ec8dea21925c77fa79a2bf2a34cef705.1673451705.git.drv@mailo.com
|
|
Using DEFINE_SIMPLE_ATTRIBUTE macro with the debugfs_create_file()
function adds the overhead of introducing a proxy file operation
functions to wrap the original read/write inside file removal protection
functions. This adds significant overhead in terms of introducing and
managing the proxy factory file operations structure and function
wrapping at runtime.
As a replacement, a combination of DEFINE_DEBUGFS_ATTRIBUTE macro paired
with debugfs_create_file_unsafe() is suggested to be used instead. The
DEFINE_DEBUGFS_ATTRIBUTE utilises debugfs_file_get() and
debugfs_file_put() wrappers to protect the original read and write
function calls for the debug attributes. There is no need for any
runtime proxy file operations to be managed by the debugfs core.
Following coccicheck make command helped identify this change:
make coccicheck M=drivers/gpu/drm/i915/ MODE=patch COCCI=./scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci
Signed-off-by: Deepak R Varma <drv@mailo.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9e08dd1b5fabf3e4f54dda27dd1d6ea1dbe6c542.1673451705.git.drv@mailo.com
|
|
There should be one error return when fail to fetch the perst reset.
Add the missing error return.
Fixes: dce9edff16ee ("phy: freescale: imx8m-pcie: Add i.MX8MP PCIe PHY support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/1671433941-2037-1-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This reverts commit 557a28811c7e0286d3816842032db5eb7bb5f156.
This commit introduced an init sequence from downstream DT [1] in the
driver. As mentioned by the comment above the HSPHY_INIT_CFG macro for
this sequence:
/*
* The macro is used to define an initialization sequence. Each tuple
* is meant to program 'value' into phy register at 'offset' with 'delay'
* in us followed.
*/
Instead of corresponding to offsets into the phy register, the sequence
read by the downstream driver [2] is passed into ulpi_write [3] which
crafts the address-value pair into a new value and writes it into the
same register at USB_ULPI_VIEWPORT [4]. In other words, this init
sequence is programmed into the hardware in a totally different way than
downstream and is unlikely to achieve the desired result, if the hsphy
is working at all.
An alternative method needs to be found to write these init values at
the desired location. Fortunately mdm9607 did not land upstream yet [5]
and should have its compatible revised to use the generic one, instead
of a compatible that writes wrong data to the wrong registers.
[1]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/arch/arm/boot/dts/qcom/mdm9607.dtsi#585
[2]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#4183
[3]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#468
[4]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#418
[5]: https://lore.kernel.org/linux-arm-msm/20210805222812.40731-1-konrad.dybcio@somainline.org/
Reported-by: Michael Srba <Michael.Srba@seznam.cz>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20221214223733.648167-1-marijn.suijten@somainline.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
rockchip_usb2phy_power_on()
The clk_disable_unprepare() should be called in the error handling of
rockchip_usb2phy_power_on().
Fixes: 0e08d2a727e6 ("phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20221205115823.16957-1-shangxiaojing@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Commit 07a2975c65f2 ("drm/vc4: bo: Fix drmm_mutex_init memory hog")
removed the only use of the ret variable, but didn't remove the
variable itself leading to a unused variable warning.
Remove that variable.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 07a2975c65f2 ("drm/vc4: bo: Fix drmm_mutex_init memory hog")
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230113154637.1704116-1-maxime@cerno.tech
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- avoid a potential crash on the efi_subsys_init() error path
- use more appropriate error code for runtime services calls issued
after a crash in the firmware occurred
- avoid READ_ONCE() for accessing firmware tables that may appear
misaligned in memory
* tag 'efi-fixes-for-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: tpm: Avoid READ_ONCE() for accessing the event log
efi: rt-wrapper: Add missing include
efi: fix userspace infinite retry read efivars after EFI runtime services page fault
efi: fix NULL-deref in init error path
|
|
Add all the know DSB instruction opcodes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216003810.13338-12-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
The caller should more or less know how many DSB commands it
wants to emit into the command buffer, so allow it to specify
the size of the command buffer rather than having the low level
DSB code guess it.
Technically we can emit as many as 134+1033 (for adl+ degamma +
10bit gamma) register writes but thanks to the DSB indexed register
write command we get significant space savings so the current size
estimate of 8KiB (~1024 DSB commands) is sufficient for now.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216003810.13338-11-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
Move the DSB tail cacheline alignment to a helper. No need to pollute
the caller with mundane details like this.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216003810.13338-10-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
The DSB indexed register write insturction is purely an internal
DSB implementation detail, no reason why the caller should have to
know about it. So let's just have the caller emit blind register
writes let the DSB code convert things to an indexed write if/when
multiple writes occur to the same register offset in a row.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216003810.13338-9-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
Currently intel_dsb_indexed_reg_write() just assumes the previous
instructions is also an indexed register write, and thus only
checks the register offset. Make the check more robust by
actually checking the instruction opcode as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216003810.13338-8-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
Extract a small helper to emit a DSB intstruction. Should
become useful if/when we need to start emitting other
instructions besides register writes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216003810.13338-7-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
Pull the DSB command buffer size checks into a small helper so
we don't have repeat the same thing multiple times.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216003810.13338-6-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
free_pos is in dwords, DSB_BUF_SIZE in bytes. Directly
comparing the two is nonsense. Fix it up, and make sure
we also account for the 8byte alignment requirement for
each instruction, and also assume that each instruction
normally eats two dwords.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216003810.13338-5-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
Every DSB instruction has to be 8byte aligned. Make sure
that is the case for the non-indexed register writes as well.
The way this could end up unaligned is we emitted an odd
number of indexed register writes beforehand.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216003810.13338-4-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
No point in having these wrappers for a simple DSB_CTRL write.
Inline them into intel_dsb_commit().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216003810.13338-3-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <Animesh.manna@intel.com>
|
|
We don't want to keep random bits set in DSB_CTRL. Stop the
harmful RMW.
Also flip the reverse & around to appease my ocd.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216003810.13338-2-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix assorted issues in the ARM cpufreq drivers and in the AMD
P-state driver.
Specifics:
- Fix cpufreq policy reference counting in amd-pstate to prevent it
from crashing on removal (Perry Yuan)
- Fix double initialization and set suspend-freq for Apple's cpufreq
driver (Arnd Bergmann, Hector Martin)
- Fix reading of "reg" property, update cpufreq-dt's blocklist and
update DT documentation for Qualcomm's cpufreq driver (Konrad
Dybcio, Krzysztof Kozlowski)
- Replace 0 with NULL in the Armada cpufreq driver (Miles Chen)
- Fix potential overflows in the CPPC cpufreq driver (Pierre Gondois)
- Update blocklist for the Tegra234 Soc cpufreq driver (Sumit Gupta)"
* tag 'pm-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: amd-pstate: fix kernel hang issue while amd-pstate unregistering
cpufreq: armada-37xx: stop using 0 as NULL pointer
cpufreq: apple-soc: Switch to the lowest frequency on suspend
dt-bindings: cpufreq: cpufreq-qcom-hw: document interrupts
cpufreq: Add SM6375 to cpufreq-dt-platdev blocklist
cpufreq: Add Tegra234 to cpufreq-dt-platdev blocklist
cpufreq: qcom-hw: Fix reading "reg" with address/size-cells != 2
cpufreq: CPPC: Add u64 casts to avoid overflowing
cpufreq: apple: remove duplicate intializer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These add one more ACPI IRQ override quirk, improve ACPI companion
lookup for backlight devices and add missing kernel command line
option values for backlight detection.
Specifics:
- Improve ACPI companion lookup for backlight devices in the cases
when there is more than one candidate ACPI device object (Hans de
Goede)
- Add missing support for manual selection of NVidia-WMI-EC or Apple
GMUX backlight in the kernel command line to the ACPI backlight
driver (Hans de Goede)
- Skip ACPI IRQ override on Asus Expertbook B2402CBA (Tamim Khan)"
* tag 'acpi-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: Fix selecting wrong ACPI fwnode for the iGPU on some Dell laptops
ACPI: video: Allow selecting NVidia-WMI-EC or Apple GMUX backlight from the cmdline
ACPI: resource: Skip IRQ override on Asus Expertbook B2402CBA
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"A set of assorted fixes and hardware-id additions"
* tag 'platform-drivers-x86-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Fix profile mode display in AMT mode
platform/x86: int3472/discrete: Ensure the clk/power enable pins are in output mode
platform/x86/amd: Fix refcount leak in amd_pmc_probe
platform/x86: intel/pmc/core: Add Meteor Lake mobile support
platform/x86: simatic-ipc: add another model
platform/x86: simatic-ipc: correct name of a model
platform/x86: dell-privacy: Only register SW_CAMERA_LENS_COVER if present
platform/x86: dell-privacy: Fix SW_CAMERA_LENS_COVER reporting
platform/x86: asus-wmi: Don't load fan curves without fan
platform/x86: asus-wmi: Ignore fan on E410MA
platform/x86: asus-wmi: Add quirk wmi_ignore_fan
platform/x86: asus-nb-wmi: Add alternate mapping for KEY_SCREENLOCK
platform/x86: asus-nb-wmi: Add alternate mapping for KEY_CAMERA
platform/surface: aggregator: Add missing call to ssam_request_sync_free()
platform/surface: aggregator: Ignore command messages not intended for us
platform/x86: touchscreen_dmi: Add info for the CSL Panther Tab HD
platform/x86: ideapad-laptop: Add Legion 5 15ARH05 DMI id to set_fn_lock_led_list[]
platform/x86: sony-laptop: Don't turn off 0x153 keyboard backlight during probe
|
|
Pull drm fixes from Dave Airlie:
"There is a bit of a post-holiday build up here I expect, small fixes
across the board, amdgpu and msm being the main leaders, with others
having a few. One code removal patch for nouveau:
buddy:
- benchmark regression fix for top-down buddy allocation
panel:
- add Lenovo panel orientation quirk
ttm:
- fix kernel oops regression
amdgpu:
- fix missing fence references
- fix missing pipeline sync fencing
- SMU13 fan speed fix
- SMU13 fix power cap handling
- SMU13 BACO fix
- Fix a possible segfault in bo validation error case
- Delay removal of firmware framebuffer
- Fix error when unloading
amdkfd:
- SVM fix when clearing vram
- GC11 fix for multi-GPU
i915:
- Reserve enough fence slot for i915_vma_unbind_vsync
- Fix potential use after free
- Reset engines twice in case of reset failure
- Use multi-cast registers for SVG Unit registers
msm:
- display:
- doc warning fixes
- dt attribs cleanups
- memory leak fix
- error handing in hdmi probe fix
- dp_aux_isr incorrect signalling fix
- shutdown path fix
- accel:
- a5xx: fix quirks to be a bitmask
- a6xx: fix gx halt to avoid 1s hang
- kexec shutdown fix
- fix potential double free
vmwgfx:
- drop rcu usage to make code more robust
virtio:
- fix use-after-free in gem handle code
nouveau:
- drop unused nouveau_fbcon.c"
* tag 'drm-fixes-2023-01-13' of git://anongit.freedesktop.org/drm/drm: (35 commits)
drm: Optimize drm buddy top-down allocation method
drm/ttm: Fix a regression causing kernel oops'es
drm/i915/gt: Cover rest of SVG unit MCR registers
drm/nouveau: Remove file nouveau_fbcon.c
drm/amdkfd: Fix NULL pointer error for GC 11.0.1 on mGPU
drm/amd/pm/smu13: BACO is supported when it's in BACO state
drm/amdkfd: Add sync after creating vram bo
drm/i915/gt: Reset twice
drm/amdgpu: fix pipeline sync v2
drm/vmwgfx: Remove rcu locks from user resources
drm/virtio: Fix GEM handle creation UAF
drm/amdgpu: Fixed bug on error when unloading amdgpu
drm/amd: Delay removal of the firmware framebuffer
drm/amdgpu: Fix potential NULL dereference
drm/i915: Fix potential context UAFs
drm/i915: Reserve enough fence slot for i915_vma_unbind_async
drm: Add orientation quirk for Lenovo ideapad D330-10IGL
drm/msm/a6xx: Avoid gx gbit halt during rpm suspend
drm/msm/adreno: Make adreno quirks not overwrite each other
drm/msm: another fix for the headless Adreno GPU
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Here's a sizeable batch of Friday the 13th arm64 fixes for -rc4. What
could possibly go wrong?
The obvious reason we have so much here is because of the holiday
season right after the merge window, but we've also brought back an
erratum workaround that was previously dropped at the last minute and
there's an MTE coredumping fix that strays outside of the arch/arm64
directory.
Summary:
- Fix PAGE_TABLE_CHECK failures on hugepage splitting path
- Fix PSCI encoding of MEM_PROTECT_RANGE function in UAPI header
- Fix NULL deref when accessing debugfs node if PSCI is not present
- Fix MTE core dumping when VMA list is being updated concurrently
- Fix SME signal frame handling when SVE is not implemented by the
CPU
- Fix asm constraints for cmpxchg_double() to hazard both words
- Fix build failure with stack tracer and older versions of Clang
- Bring back workaround for Cortex-A715 erratum 2645198"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix build with CC=clang, CONFIG_FTRACE=y and CONFIG_STACK_TRACER=y
arm64/mm: Define dummy pud_user_exec() when using 2-level page-table
arm64: errata: Workaround possible Cortex-A715 [ESR|FAR]_ELx corruption
firmware/psci: Don't register with debugfs if PSCI isn't available
firmware/psci: Fix MEM_PROTECT_RANGE function numbers
arm64/signal: Always allocate SVE signal frames on SME only systems
arm64/signal: Always accept SVE signal frames on SME only systems
arm64/sme: Fix context switch for SME only systems
arm64: cmpxchg_double*: hazard against entire exchange variable
arm64/uprobes: change the uprobe_opcode_t typedef to fix the sparse warning
arm64: mte: Avoid the racy walk of the vma list during core dump
elfcore: Add a cprm parameter to elf_core_extra_{phdrs,data_size}
arm64: mte: Fix double-freeing of the temporary tag storage during coredump
arm64: ptrace: Use ARM64_SME to guard the SME register enumerations
arm64/mm: add pud_user_exec() check in pud_user_accessible_page()
arm64/mm: fix incorrect file_map_count for invalid pmd
|
|
A clk, prepared and enabled in mtk_iommu_v1_hw_init(), is not released in
the error handling path of mtk_iommu_v1_probe().
Add the corresponding clk_disable_unprepare(), as already done in the
remove function.
Fixes: b17336c55d89 ("iommu/mediatek: add support for mtk iommu generation one HW")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/593e7b7d97c6e064b29716b091a9d4fd122241fb.1671473163.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
In __alloc_and_insert_iova_range, there is an issue that retry_pfn
overflows. The value of iovad->anchor.pfn_hi is ~0UL, then when
iovad->cached_node is iovad->anchor, curr_iova->pfn_hi + 1 will
overflow. As a result, if the retry logic is executed, low_pfn is
updated to 0, and then new_pfn < low_pfn returns false to make the
allocation successful.
This issue occurs in the following two situations:
1. The first iova size exceeds the domain size. When initializing
iova domain, iovad->cached_node is assigned as iovad->anchor. For
example, the iova domain size is 10M, start_pfn is 0x1_F000_0000,
and the iova size allocated for the first time is 11M. The
following is the log information, new->pfn_lo is smaller than
iovad->cached_node.
Example log as follows:
[ 223.798112][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range
start_pfn:0x1f0000,retry_pfn:0x0,size:0xb00,limit_pfn:0x1f0a00
[ 223.799590][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range
success start_pfn:0x1f0000,new->pfn_lo:0x1efe00,new->pfn_hi:0x1f08ff
2. The node with the largest iova->pfn_lo value in the iova domain
is deleted, iovad->cached_node will be updated to iovad->anchor,
and then the alloc iova size exceeds the maximum iova size that can
be allocated in the domain.
After judging that retry_pfn is less than limit_pfn, call retry_pfn+1
to fix the overflow issue.
Signed-off-by: jianjiao zeng <jianjiao.zeng@mediatek.com>
Signed-off-by: Yunfei Wang <yf.wang@mediatek.com>
Cc: <stable@vger.kernel.org> # 5.15.*
Fixes: 4e89dce72521 ("iommu/iova: Retry from last rb tree node if iova search fails")
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20230111063801.25107-1-yf.wang@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
iommu_group_get() returns the group with the reference incremented.
Move iommu_group_get() after owner check to fix the refcount leak.
Fixes: 89395ccedbc1 ("iommu: Add device-centric DMA ownership interfaces")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221230083100.1489569-1-linmq006@gmail.com
[ joro: Remove *group = NULL initialization ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Similar to SMMUv2, this driver calls iommu_device_unregister() from the
shutdown path, which removes the IOMMU groups with no coordination
whatsoever with their users - shutdown methods are optional in device
drivers. This can lead to NULL pointer dereferences in those drivers'
DMA API calls, or worse.
Instead of calling the full arm_smmu_device_remove() from
arm_smmu_device_shutdown(), let's pick only the relevant function call -
arm_smmu_device_disable() - more or less the reverse of
arm_smmu_device_reset() - and call just that from the shutdown path.
Fixes: 57365a04c921 ("iommu: Move bus setup to IOMMU device registration")
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20221215141251.3688780-2-vladimir.oltean@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Michael Walle says he noticed the following stack trace while performing
a shutdown with "reboot -f". He suggests he got "lucky" and just hit the
correct spot for the reboot while there was a packet transmission in
flight.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098
CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 6.1.0-rc5-00088-gf3600ff8e322 #1930
Hardware name: Kontron KBox A-230-LS (DT)
pc : iommu_get_dma_domain+0x14/0x20
lr : iommu_dma_map_page+0x9c/0x254
Call trace:
iommu_get_dma_domain+0x14/0x20
dma_map_page_attrs+0x1ec/0x250
enetc_start_xmit+0x14c/0x10b0
enetc_xmit+0x60/0xdc
dev_hard_start_xmit+0xb8/0x210
sch_direct_xmit+0x11c/0x420
__dev_queue_xmit+0x354/0xb20
ip6_finish_output2+0x280/0x5b0
__ip6_finish_output+0x15c/0x270
ip6_output+0x78/0x15c
NF_HOOK.constprop.0+0x50/0xd0
mld_sendpack+0x1bc/0x320
mld_ifc_work+0x1d8/0x4dc
process_one_work+0x1e8/0x460
worker_thread+0x178/0x534
kthread+0xe0/0xe4
ret_from_fork+0x10/0x20
Code: d503201f f9416800 d503233f d50323bf (f9404c00)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt
This appears to be reproducible when the board has a fixed IP address,
is ping flooded from another host, and "reboot -f" is used.
The following is one more manifestation of the issue:
$ reboot -f
kvm: exiting hardware virtualization
cfg80211: failed to load regulatory.db
arm-smmu 5000000.iommu: disabling translation
sdhci-esdhc 2140000.mmc: Removing from iommu group 11
sdhci-esdhc 2150000.mmc: Removing from iommu group 12
fsl-edma 22c0000.dma-controller: Removing from iommu group 17
dwc3 3100000.usb: Removing from iommu group 9
dwc3 3110000.usb: Removing from iommu group 10
ahci-qoriq 3200000.sata: Removing from iommu group 2
fsl-qdma 8380000.dma-controller: Removing from iommu group 20
platform f080000.display: Removing from iommu group 0
etnaviv-gpu f0c0000.gpu: Removing from iommu group 1
etnaviv etnaviv: Removing from iommu group 1
caam_jr 8010000.jr: Removing from iommu group 13
caam_jr 8020000.jr: Removing from iommu group 14
caam_jr 8030000.jr: Removing from iommu group 15
caam_jr 8040000.jr: Removing from iommu group 16
fsl_enetc 0000:00:00.0: Removing from iommu group 4
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000
fsl_enetc 0000:00:00.1: Removing from iommu group 5
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000
fsl_enetc 0000:00:00.2: Removing from iommu group 6
fsl_enetc_mdio 0000:00:00.3: Removing from iommu group 8
mscc_felix 0000:00:00.5: Removing from iommu group 3
fsl_enetc 0000:00:00.6: Removing from iommu group 7
pcieport 0001:00:00.0: Removing from iommu group 18
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x00000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000
pcieport 0002:00:00.0: Removing from iommu group 19
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8
pc : iommu_get_dma_domain+0x14/0x20
lr : iommu_dma_unmap_page+0x38/0xe0
Call trace:
iommu_get_dma_domain+0x14/0x20
dma_unmap_page_attrs+0x38/0x1d0
enetc_unmap_tx_buff.isra.0+0x6c/0x80
enetc_poll+0x170/0x910
__napi_poll+0x40/0x1e0
net_rx_action+0x164/0x37c
__do_softirq+0x128/0x368
run_ksoftirqd+0x68/0x90
smpboot_thread_fn+0x14c/0x190
Code: d503201f f9416800 d503233f d50323bf (f9405400)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt
---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
The problem seems to be that iommu_group_remove_device() is allowed to
run with no coordination whatsoever with the shutdown procedure of the
enetc PCI device. In fact, it almost seems as if it implies that the
pci_driver :: shutdown() method is mandatory if DMA is used with an
IOMMU, otherwise this is inevitable. That was never the case; shutdown
methods are optional in device drivers.
This is the call stack that leads to iommu_group_remove_device() during
reboot:
kernel_restart
-> device_shutdown
-> platform_shutdown
-> arm_smmu_device_shutdown
-> arm_smmu_device_remove
-> iommu_device_unregister
-> bus_for_each_dev
-> remove_iommu_group
-> iommu_release_device
-> iommu_group_remove_device
I don't know much about the arm_smmu driver, but
arm_smmu_device_shutdown() invoking arm_smmu_device_remove() looks
suspicious, since it causes the IOMMU device to unregister and that's
where everything starts to unravel. It forces all other devices which
depend on IOMMU groups to also point their ->shutdown() to ->remove(),
which will make reboot slower overall.
There are 2 moments relevant to this behavior. First was commit
b06c076ea962 ("Revert "iommu/arm-smmu: Make arm-smmu explicitly
non-modular"") when arm_smmu_device_shutdown() was made to run the exact
same thing as arm_smmu_device_remove(). Prior to that, there was no
iommu_device_unregister() call in arm_smmu_device_shutdown(). However,
that was benign until commit 57365a04c921 ("iommu: Move bus setup to
IOMMU device registration"), which made iommu_device_unregister() call
remove_iommu_group().
Restore the old shutdown behavior by making remove() call shutdown(),
but shutdown() does not call the remove() specific bits.
Fixes: 57365a04c921 ("iommu: Move bus setup to IOMMU device registration")
Reported-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc> # on kontron-sl28
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20221215141251.3688780-1-vladimir.oltean@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Although it's vanishingly unlikely that anyone would integrate an SMMU
within a coherent interconnect without also making the pagetable walk
interface coherent, the same effect happens if a coherent SMMU fails to
advertise CTTW correctly. This turns out to be the case on some popular
NXP SoCs, where VFIO started failing the IOMMU_CAP_CACHE_COHERENCY test,
even though IOMMU_CACHE *was* previously achieving the desired effect
anyway thanks to the underlying integration.
While those SoCs stand to gain some more general benefits from a
firmware update to override CTTW correctly in DT/ACPI, it's also easy
to work around this in Linux as well, to avoid imposing too much on
affected users - since the upstream client devices *are* correctly
marked as coherent, we can trivially infer their coherent paths through
the SMMU as well.
Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Fixes: df198b37e72c ("iommu/arm-smmu: Report IOMMU_CAP_CACHE_COHERENCY better")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/d6dc41952961e5c7b21acac08a8bf1eb0f69e124.1671123115.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Including <drm/drm_fb_helper.h> is not required, so remove the include
statements. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230111130206.29974-11-tzimmermann@suse.de
|
|
Fix coding style. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230111130206.29974-10-tzimmermann@suse.de
|
|
Including <drm/drm_fb_helper.h> is not required, so remove the include
statement. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230111130206.29974-9-tzimmermann@suse.de
|
|
Including <drm/drm_fb_helper.h> is not required, so remove the include
statements. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230111130206.29974-8-tzimmermann@suse.de
|
|
Remove unnecessary include statements for <linux/fb.h>. No functional
changes. Include <linux/of.h> where the driver got the header file via
<linux/fb.h>.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230111130206.29974-6-tzimmermann@suse.de
|
|
Remove unnecessary include statements for <linux/fb.h>. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230111130206.29974-5-tzimmermann@suse.de
|
|
Include <linux/of.h> in source files that need it. Some of DRM's
source code gets OF header via drm_crtc_helper.h and <linux/fb.h>,
which can leed to unnecessary recompilation.
In drm_modes.c, add a comment on the reason for still including
<linux/fb.h>. The header file is required to get KHZ2PICOS(). The
macro is part of the UAPI headers, so it cannot be moved to a less
prominent location.
v2:
* include <linux/of.h> in komeda_drv.c (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Liviu Dudau <liviu.dudau@arm.com> # komeda
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230111130206.29974-3-tzimmermann@suse.de
|
