summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-05-27clk: mmp: frac: Do not lose last 4 digits of precisionLubomir Rintel
While calculating the output rate of a fractional divider clock, the value is divided and multipled by 10000, discarding the least significant digits -- presumably to fit the intermediate value within 32 bits. The precision we're losing is, however, not insignificant for things like I2S clock. Maybe also elsewhere, now that since commit ea56ad60260e ("clk: mmp2: Stop pretending PLL outputs are constant") the parent rates are more precise and no longer rounded to 10000s. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200519224151.2074597-2-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-27ice: Add XDP Tx to VSI ring statsMarta Plantykow
When XDP Tx program is loaded and packets are sent from interface, VSI statistics are not updated. This patch adds packets sent on Tx XDP ring to VSI ring stats. Signed-off-by: Marta Plantykow <marta.a.plantykow@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-27ice: Change number of XDP TxQ to 0 when destroying ringsMarta Plantykow
When XDP Tx rings are destroyed the number of XDP Tx queues is not changing. This patch is changing this number to 0. Signed-off-by: Marta Plantykow <marta.a.plantykow@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-27ice: Handle critical FW error during admin queue initializationEvan Swanson
A race condition between FW and SW can occur between admin queue setup and the first command sent. A link event may occur and FW attempts to notify a non-existent queue. FW will set the critical error bit and disable the queue. When this happens retry queue setup. Signed-off-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-27ice: Don't allow VLAN stripping change when pvid setBrett Creeley
Currently, if the PVID is set in the VLAN handling section of the VSI context the driver still allows VLAN stripping to be enabled/disabled. VLAN stripping should only be modifiable when the PVID is not set. Fix this by preventing VLAN stripping modification when PVID is set. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-27ice: Add more Rx errors to netdev's rx_error counterBrett Creeley
Currently we are only including illegal_bytes and rx_crc_errors in the PF netdev's rx_error counter. There are many more causes of Rx errors that the device supports and reports via Ethtool. Accumulate all Rx errors in the PF netdev's rx_error counter. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-27ice: Fix for memory leaks and modify ICE_FREE_CQ_BUFSSurabhi Boob
Handle memory leaks during control queue initialization and buffer allocation failures. The macro ICE_FREE_CQ_BUFS is modified to re-use for this fix. Signed-off-by: Surabhi Boob <surabhi.boob@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-27IB/ipoib: Fix double free of skb in case of multicast traffic in CM modeValentine Fatiev
When connected mode is set, and we have connected and datagram traffic in parallel, ipoib might crash with double free of datagram skb. The current mechanism assumes that the order in the completion queue is the same as the order of sent packets for all QPs. Order is kept only for specific QP, in case of mixed UD and CM traffic we have few QPs (one UD and few CM's) in parallel. The problem: ---------------------------------------------------------- Transmit queue: ----------------- UD skb pointer kept in queue itself, CM skb kept in spearate queue and uses transmit queue as a placeholder to count the number of total transmitted packets. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 .........127 ------------------------------------------------------------ NL ud1 UD2 CM1 ud3 cm2 cm3 ud4 cm4 ud5 NL NL NL ........... ------------------------------------------------------------ ^ ^ tail head Completion queue (problematic scenario) - the order not the same as in the transmit queue: 1 2 3 4 5 6 7 8 9 ------------------------------------ ud1 CM1 UD2 ud3 cm2 cm3 ud4 cm4 ud5 ------------------------------------ 1. CM1 'wc' processing - skb freed in cm separate ring. - tx_tail of transmit queue increased although UD2 is not freed. Now driver assumes UD2 index is already freed and it could be used for new transmitted skb. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 .........127 ------------------------------------------------------------ NL NL UD2 CM1 ud3 cm2 cm3 ud4 cm4 ud5 NL NL NL ........... ------------------------------------------------------------ ^ ^ ^ (Bad)tail head (Bad - Could be used for new SKB) In this case (due to heavy load) UD2 skb pointer could be replaced by new transmitted packet UD_NEW, as the driver assumes its free. At this point we will have to process two 'wc' with same index but we have only one pointer to free. During second attempt to free the same skb we will have NULL pointer exception. 2. UD2 'wc' processing - skb freed according the index we got from 'wc', but it was already overwritten by mistake. So actually the skb that was released is the skb of the new transmitted packet and not the original one. 3. UD_NEW 'wc' processing - attempt to free already freed skb. NUll pointer exception. The fix: ----------------------------------------------------------------------- The fix is to stop using the UD ring as a placeholder for CM packets, the cyclic ring variables tx_head and tx_tail will manage the UD tx_ring, a new cyclic variables global_tx_head and global_tx_tail are introduced for managing and counting the overall outstanding sent packets, then the send queue will be stopped and waken based on these variables only. Note that no locking is needed since global_tx_head is updated in the xmit flow and global_tx_tail is updated in the NAPI flow only. A previous attempt tried to use one variable to count the outstanding sent packets, but it did not work since xmit and NAPI flows can run at the same time and the counter will be updated wrongly. Thus, we use the same simple cyclic head and tail scheme that we have today for the UD tx_ring. Fixes: 2c104ea68350 ("IB/ipoib: Get rid of the tx_outstanding variable in all modes") Link: https://lore.kernel.org/r/20200527134705.480068-1-leon@kernel.org Signed-off-by: Valentine Fatiev <valentinef@mellanox.com> Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-27ice: Fix memory leakSurabhi Boob
Handle memory leak on filter management initialization failure. Signed-off-by: Surabhi Boob <surabhi.boob@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-27ice: fix MAC write commandJesse Brandeburg
The manage MAC write command was implemented in an overly complex way that actually didn't work, as it wasn't symmetric to the manage MAC read command, and was feeding bytes out of order to the firmware. Fix the implementation by just using a simple array to represent the MAC address when it is being written via firmware command. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-27ice: set VF default LAN addressPaul Greenwalt
Remove is_zero_ether_add() check when setting the VF default LAN address. This check assumed that the address had been delete and zeroed before calling ice_vc_add_mac_addr(). Now the default LAN address will be set to the last unicast MAC address added by the VF. The default LAN address is reported by the PF via ndo_get_vf_config. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-27ice: remove unused macroJesse Brandeburg
The driver had an unused define that can be removed. Found by compiler -Werror=unused-macros check. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-27ice: fix signed vs unsigned comparisonsJesse Brandeburg
Fix the remaining signed vs unsigned issues, which appear when compiling with -Werror=sign-compare. Many of these are because there is an external interface that is passing an int to us (which we can't change) but that we (rightfully) store and compare against as an unsigned in our data structures. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-27ipmi:ssif: Remove dynamic platform device handingCorey Minyard
Platform devices can only come in through the DMI interface, and that will get done before initialization is complete. Therefore there is no reason to hande getting a device in new_ssif_client after initialization. Dynamic entries can still come in through the i2c interfaces, but that's handled differently. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2020-05-27drm/amd/display: Fix potential integer wraparound resulting in a hangAric Cyr
[Why] If VUPDATE_END is before VUPDATE_START the delay calculated can become very large, causing a soft hang. [How] Take the absolute value of the difference between START and END. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-27drm/amd/display: drop cursor position check in atomic testSimon Ser
get_cursor_position already handles the case where the cursor has negative off-screen coordinates by not setting dc_cursor_position.enabled. Signed-off-by: Simon Ser <contact@emersion.fr> Fixes: 626bf90fe03f ("drm/amd/display: add basic atomic check for cursor plane") Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-27xenbus: Use dev_printk() when possibleBjorn Helgaas
Use dev_printk() when possible to include device and driver information in the conventional format. Add "#define dev_fmt" to preserve KBUILD_MODNAME in messages. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20200527174326.254329-3-helgaas@kernel.org Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-05-27xen-pciback: Use dev_printk() when possibleBjorn Helgaas
Use dev_printk() when possible to include device and driver information in the conventional format. Add "#define dev_fmt" when needed to preserve DRV_NAME or KBUILD_MODNAME in messages. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20200527174326.254329-2-helgaas@kernel.org Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-05-27drm/amd/display: Fix potential integer wraparound resulting in a hangAric Cyr
[Why] If VUPDATE_END is before VUPDATE_START the delay calculated can become very large, causing a soft hang. [How] Take the absolute value of the difference between START and END. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-05-27drm/amd/display: drop cursor position check in atomic testSimon Ser
get_cursor_position already handles the case where the cursor has negative off-screen coordinates by not setting dc_cursor_position.enabled. Signed-off-by: Simon Ser <contact@emersion.fr> Fixes: 626bf90fe03f ("drm/amd/display: add basic atomic check for cursor plane") Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-05-27drivers: ipa: remove discription of nonexistent elementWang Wenhu
No element named "client" exists within "struct ipa_endpoint". It might be a heritage forgotten to be removed. Delete it now. Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27drivers: ipa: fix typoes for ipaWang Wenhu
Change "transactio" -> "transaction". Also an alignment correction. Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: hns3: add a print for initializing CMDQ when reset pendingHuazhong Tan
When initializing CMDQ fails because of reset pending, there is no hint for debugging, so adds a log for it. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: hns3: remove unnecessary MAC enable in app loopbackYufeng Mo
Packets will not pass through MAC during app loopback. Therefore, it is meaningless to enable MAC while doing app loopback. This patch removes this unnecessary action. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: hns3: change the order of reinitializing RoCE and NIC client during resetYufeng Mo
The HNS RDMA driver will support VF device later, whose re-initialization should be done after PF's. This patch changes the order of hclge_reset_prepare_up() and hclge_notify_roce_client(), so that PF's RoCE client will be reinitialized before VF's. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: hns3: add a resetting check in hclgevf_init_nic_client_instance()Guangbin Huang
To prevent from initializing VF NIC client in reset handling state, this patch adds resetting check in hclgevf_init_nic_client_instance(). Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: mscc: allow offloading timestamping operations to the PHYAntoine Tenart
This patch adds support for offloading timestamping operations not only to the Ocelot switch (as already supported) but to compatible PHYs. When both the PHY and the Ocelot switch support timestamping operations, the PHY implementation is chosen as the timestamp will happen closer to the medium. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: mscc: use the PHY MII ioctl interface when possibleAntoine Tenart
Allow ioctl to be implemented by the PHY, when a PHY is attached to the Ocelot switch. In case the ioctl is a request to set or get the hardware timestamp, use the Ocelot switch implementation for now. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27PCI: Rename _DSM constants to align with specKrzysztof Wilczyński
Rename PCI-related _DSM constants to align them with the PCI Firmware Spec, r3.2, sec 4.6. No functional change intended. Link: https://lore.kernel.org/r/20200526213905.2479381-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-05-27PCI: Avoid FLR for AMD Starship USB 3.0Kevin Buettner
The AMD Starship USB 3.0 host controller advertises Function Level Reset support, but it apparently doesn't work. Add a quirk to prevent use of FLR on this device. Without this quirk, when attempting to assign (pass through) an AMD Starship USB 3.0 host controller to a guest OS, the system becomes increasingly unresponsive over the course of several minutes, eventually requiring a hard reset. Shortly after attempting to start the guest, I see these messages: vfio-pci 0000:05:00.3: not ready 1023ms after FLR; waiting vfio-pci 0000:05:00.3: not ready 2047ms after FLR; waiting vfio-pci 0000:05:00.3: not ready 4095ms after FLR; waiting vfio-pci 0000:05:00.3: not ready 8191ms after FLR; waiting And then eventually: vfio-pci 0000:05:00.3: not ready 65535ms after FLR; giving up INFO: NMI handler (perf_event_nmi_handler) took too long to run: 0.000 msecs perf: interrupt took too long (642744 > 2500), lowering kernel.perf_event_max_sample_rate to 1000 INFO: NMI handler (perf_event_nmi_handler) took too long to run: 82.270 msecs INFO: NMI handler (perf_event_nmi_handler) took too long to run: 680.608 msecs INFO: NMI handler (perf_event_nmi_handler) took too long to run: 100.952 msecs ... watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [qemu-system-x86:7487] Tested on a Micro-Star International Co., Ltd. MS-7C59/Creator TRX40 motherboard with an AMD Ryzen Threadripper 3970X. Link: https://lore.kernel.org/r/20200524003529.598434ff@f31-4.lan Signed-off-by: Kevin Buettner <kevinb@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-05-27PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0Marcos Scriven
The AMD Matisse HD Audio & USB 3.0 devices advertise Function Level Reset support, but hang when an FLR is triggered. To reproduce the problem, attach the device to a VM, then detach and try to attach again. Rename the existing quirk_intel_no_flr(), which was not Intel-specific, to quirk_no_flr(), and apply it to prevent the use of FLR on these AMD devices. Link: https://lore.kernel.org/r/CAAri2DpkcuQZYbT6XsALhx2e6vRqPHwtbjHYeiH7MNp4zmt1RA@mail.gmail.com Signed-off-by: Marcos Scriven <marcos@scriven.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-05-27RDMA/mlx5: Return ECE data after modify QPLeon Romanovsky
After users sets the ECE option, FW will return the agreed/supported bits through an output structures of modify QP stages for regular QPs or through create QP for the DCT. Link: https://lore.kernel.org/r/20200526115440.205922-9-leon@kernel.org Reviewed-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-27RDMA/mlx5: Set ECE options during modify QPLeon Romanovsky
The most common way to set ECE option will be during modify QP command in INIT2RTR, RTR2RTS and RTS2RTS stages, so update mlx5 to support it. The new bit in the comp_mask is needed to mark that kernel supports ECE and can receive data instead of "reserved" field in the struct mlx5_ib_modify_qp. Link: https://lore.kernel.org/r/20200526115440.205922-8-leon@kernel.org Reviewed-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-27RDMA/mlx5: Convert modify QP to use MLX5_SET macrosLeon Romanovsky
Instead of hand crafted mlx5_qp_context and mlx5_qp_path use common MLX5_SET() macros. Link: https://lore.kernel.org/r/20200526115440.205922-7-leon@kernel.org Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-27RDMA/mlx5: Remove manually crafted QP context the query callLeon Romanovsky
As a preparation to removal hand crafted mlx5_qp_context, convert query_qp_attr() to use proper MLX5_GET() macros. Link: https://lore.kernel.org/r/20200526115440.205922-6-leon@kernel.org Reviewed-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-27RDMA/mlx5: Use direct modify QP implementationLeon Romanovsky
As a preparation to removal hand crafted mlx5_qp_context, convert counter code to use mlx5_cmd_exec_in() directly. Link: https://lore.kernel.org/r/20200526115440.205922-5-leon@kernel.org Reviewed-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-27RDMA/mlx5: Set ECE options during QP createLeon Romanovsky
Allow users to ask creation of QPs with specific ECE options. Such early set even before RDMA-CM connection is established is useful if user knows exactly which option he needs. Link: https://lore.kernel.org/r/20200526115440.205922-4-leon@kernel.org Reviewed-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-27RDMA/mlx5: Get ECE options from FW during create QPLeon Romanovsky
Supported ECE options are returned from FW in the create_qp phase and zero means that field is not valid. Such default value allows us to reuse reserved field without worries about comp_mask. Update create QP API to return ECE options. Link: https://lore.kernel.org/r/20200526115440.205922-3-leon@kernel.org Reviewed-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-27RDMA/cma: Provide ECE reject reasonLeon Romanovsky
IBTA declares "vendor option not supported" reject reason in REJ messages if passive side doesn't want to accept proposed ECE options. Due to the fact that ECE is managed by userspace, there is a need to let users to provide such rejected reason. Link: https://lore.kernel.org/r/20200526103304.196371-7-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-27RDMA/cma: Connect ECE to rdma_acceptLeon Romanovsky
The rdma_accept() is called by both passive and active sides of CMID connection to mark readiness to start data transfer. For passive side, this is called explicitly, for active side, it is called implicitly while receiving REP message. Provide ECE data to rdma_accept function needed for passive side to send that REP message. Link: https://lore.kernel.org/r/20200526103304.196371-6-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-27RDMA/cm: Send and receive ECE parameter over the wireLeon Romanovsky
ECE parameters are exchanged through REQ->REP/SIDR_REP messages, this patch adds the data to provide to other side of CMID communication channel. Link: https://lore.kernel.org/r/20200526103304.196371-5-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-27RDMA/ucma: Deliver ECE parameters through UCMA eventsLeon Romanovsky
Passive side of CMID connection receives ECE request through REQ message and needs to respond with relevant REP message which will be forwarded to active side. The UCMA events interface is responsible for such communication with the user space (librdmacm). Extend it to provide ECE wire data. Link: https://lore.kernel.org/r/20200526103304.196371-4-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-27RDMA/ucma: Extend ucma_connect to receive ECE parametersLeon Romanovsky
Active side of CMID initiates connection through librdmacm's rdma_connect() and kernel's ucma_connect(). Extend UCMA interface to handle those new parameters. Link: https://lore.kernel.org/r/20200526103304.196371-3-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-27Merge branch 'mellanox/mlx5-next' into rdma.git for/nextJason Gunthorpe
From the mlx5-next branch at git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Required for dependencies in following patches * branch 'mellanox/mlx5-next': net/mlx5: Add ability to read and write ECE options net/mlx5: Add support for RDMA TX FT headers modifying net/mlx5: Move iseg access helper routines close to mlx5_core driver net/mlx5: Cleanup mlx5_ifc_fte_match_set_misc2_bits Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-27IB/mlx5: Fix DEVX support for MLX5_CMD_OP_INIT2INIT_QP commandMark Zhang
The commit citied in the Fixes line wasn't complete and solved only part of the problems. Update the mlx5_ib to properly support MLX5_CMD_OP_INIT2INIT_QP command in the DEVX, that is required when modify the QP tx_port_affinity. Fixes: 819f7427bafd ("RDMA/mlx5: Add init2init as a modify command") Link: https://lore.kernel.org/r/20200527135703.482501-1-leon@kernel.org Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-27net: dsa: felix: send VLANs on CPU port as egress-taggedVladimir Oltean
As explained in other commits before (b9cd75e66895 and 87b0f983f66f), ocelot switches have a single egress-untagged VLAN per port, and the driver would deny adding a second one while an egress-untagged VLAN already exists. But on the CPU port (where the VLAN configuration is implicit, because there is no net device for the bridge to control), the DSA core attempts to add a VLAN using the same flags as were used for the front-panel port. This would make adding any untagged VLAN fail due to the CPU port rejecting the configuration: bridge vlan add dev swp0 vid 100 pvid untagged [ 1865.854253] mscc_felix 0000:00:00.5: Port already has a native VLAN: 1 [ 1865.860824] mscc_felix 0000:00:00.5: Failed to add VLAN 100 to port 5: -16 (note that port 5 is the CPU port and not the front-panel swp0). So this hardware will send all VLANs as tagged towards the CPU. Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: dsa: felix: accept VLAN config regardless of bridge VLAN awareness stateVladimir Oltean
The ocelot core library is written with the idea in mind that the VLAN table is populated by the bridge. Otherwise, not even a sane default pvid is provided: in standalone mode, the default pvid is 0, and the core expects the bridge layer to change it to 1. So without this patch, the VLAN table is completely empty at the end of the commands below, and traffic is broken as a result: ip link add dev br0 type bridge vlan_filtering 0 && ip link set dev br0 up for eth in $(ls /sys/bus/pci/devices/0000\:00\:00.5/net/); do ip link set dev $eth master br0 ip link set dev $eth up done ip link set dev br0 type bridge vlan_filtering 1 Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27nvme-pci: avoid race between nvme_reap_pending_cqes() and nvme_poll()Dongli Zhang
There may be a race between nvme_reap_pending_cqes() and nvme_poll(), e.g., when doing live reset while polling the nvme device. CPU X CPU Y nvme_poll() nvme_dev_disable() -> nvme_stop_queues() -> nvme_suspend_io_queues() -> nvme_suspend_queue() -> spin_lock(&nvmeq->cq_poll_lock); -> nvme_reap_pending_cqes() -> nvme_process_cq() -> nvme_process_cq() In the above scenario, the nvme_process_cq() for the same queue may be running on both CPU X and CPU Y concurrently. It is much more easier to reproduce the issue when CONFIG_PREEMPT is enabled in kernel. When CONFIG_PREEMPT is disabled, it would take longer time for nvme_stop_queues()-->blk_mq_quiesce_queue() to wait for grace period. This patch protects nvme_process_cq() with nvmeq->cq_poll_lock in nvme_reap_pending_cqes(). Fixes: fa46c6fb5d61 ("nvme/pci: move cqe check after device shutdown") Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27mtk-star-emac: mark PM functions as __maybe_unusedArnd Bergmann
Without CONFIG_PM, the compiler warns about two unused functions: drivers/net/ethernet/mediatek/mtk_star_emac.c:1472:12: error: unused function 'mtk_star_suspend' [-Werror,-Wunused-function] drivers/net/ethernet/mediatek/mtk_star_emac.c:1488:12: error: unused function 'mtk_star_resume' [-Werror,-Wunused-function] Mark these as __maybe_unused. Fixes: 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: dsa: b53: remove redundant premature assignment to new_pvidColin Ian King
Variable new_pvid is being assigned with a value that is never read, the following if statement updates new_pvid with a new value in both of the if paths. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-19 04:26:08 +0000