| Age | Commit message (Collapse) | Author |
|---|
|
The DTPM framework misses a mechanism to set it up. That is currently
under review but will come after the next cycle.
As the distro are enabling all the kernel options, the DTPM framework
is enabled on platforms where the energy model is not implemented,
thus making the framework inconsistent and disrupting the CPU
frequency scaling service.
Remove the initialization at boot time as a hot fix.
Fixes: 7a89d7eacf8e ("powercap/drivers/dtpm: Simplify the dtpm table")
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reported-By: Doug Smythies <dsmythies@telus.net>
Tested-By: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When I hot added a CPU, I found 'cpufreq' directory was not created
below /sys/devices/system/cpu/cpuX/.
It is because get_cpu_device() failed in add_cpu_dev_symlink().
cpufreq_add_dev() is the .add_dev callback of a CPU subsys interface.
It will be called when the CPU device registered into the system.
The call chain is as follows:
register_cpu()
->device_register()
->device_add()
->bus_probe_device()
->cpufreq_add_dev()
But only after the CPU device has been registered, we can get the
CPU device by get_cpu_device(), otherwise it will return NULL.
Since we already have the CPU device in cpufreq_add_dev(), pass
it to add_cpu_dev_symlink().
I noticed that the 'kobj' of the CPU device has been added into
the system before cpufreq_add_dev().
Fixes: 2f0ba790df51 ("cpufreq: Fix creation of symbolic links to policy directories")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.16
First set of fixes for v5.16. Mostly crash and driver initialisation
fixes, the fix for rtw89 being most important.
iwlwifi
* compiler, lockdep and smatch warning fixes
* fix for a rare driver initialisation failure
* fix a memory leak
rtw89
* fix const buffer modification causing a kernel crash
mt76
* fix null pointer access
* fix idr leak
rt2x00
* fix driver initialisation errors, a regression since v5.2-rc1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2021-11-30
This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Function mv88e6xxx_serdes_pcs_get_state() currently does not report link
up if AN is enabled, Link bit is set, but Speed and Duplex Resolved bit
is not set, which testing shows is the case for when auto-negotiation
was bypassed (we have AN enabled but link partner does not).
An example of such link partner is Marvell 88X3310 PHY, when put into
the mode where host interface changes between 10gbase-r, 5gbase-r,
2500base-x and sgmii according to copper speed. The 88X3310 does not
enable AN in 2500base-x, and so SerDes on mv88e6xxx currently does not
link with it.
Fix this.
Fixes: a5a6858b793f ("net: dsa: mv88e6xxx: extend phylink to Serdes PHYs")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Inband AN is broken on Amethyst in 2500base-x mode when set by standard
mechanism (via cmode).
(There probably is some weird setting done by default in the switch for
this mode that make it cycle in some state or something, because when
the peer is the mvneta controller, it receives link change interrupts
every ~0.3ms, but the link is always down.)
Get around this by configuring the PCS mode to 1000base-x (where inband
AN works), and then changing the SerDes frequency while SerDes
transmitter and receiver are disabled, before enabling SerDes PHY. After
disabling SerDes PHY, change the PCS mode back to 2500base-x, to avoid
confusing the device (if we leave it at 1000base-x PCS mode but with
different frequency, and then change cmode to sgmii, the device won't
change the frequency because it thinks it already has the correct one).
The register which changes the frequency is undocumented. I discovered
it by going through all registers in the ranges 4.f000-4.f100 and
1e.8000-1e.8200 for all SerDes cmodes (sgmii, 1000base-x, 2500base-x,
5gbase-r, 10gbase-r, usxgmii) and filtering out registers that didn't
make sense (the value was the same for modes which have different
frequency). The result of this was:
reg sgmii 1000base-x 2500base-x 5gbase-r 10gbase-r usxgmii
04.f002 005b 0058 0059 005c 005d 005f
04.f076 3000 0000 1000 4000 5000 7000
04.f07c 0950 0950 1850 0550 0150 0150
1e.8000 0059 0059 0058 0055 0051 0051
1e.8140 0e20 0e20 0e28 0e21 0e42 0e42
Register 04.f002 is the documented Port Operational Confiuration
register, it's last 3 bits select PCS type, so changing this register
also changes the frequency to the appropriate value.
Registers 04.f076 and 04.f07c are not writable.
Undocumented register 1e.8000 was the one: changing bits 3:0 from 9 to 8
changed SerDes frequency to 3.125 GHz, while leaving the value of PCS
mode in register 04.f002.2:0 at 1000base-x. Inband autonegotiation
started working correctly.
(I didn't try anything with register 1e.8140 since 1e.8000 solved the
problem.)
Since I don't have documentation for this register 1e.8000.3:0, I am
using the constants without names, but my hypothesis is that this
register selects PHY frequency. If in the future I have access to an
oscilloscope able to handle these frequencies, I will try to test this
hypothesis.
Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add fix for erratum 5.2 of the 88E6393X (Amethyst) family: for 10gbase-r
mode, some undocumented registers need to be written some special
values.
Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Save power on 88E6393X by disabling SerDes receiver and transmitter
after SerDes is SerDes is disabled.
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org # de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The check for lane is unnecessary, since the function is called only
with allowed lane argument.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to SERDES scripts for 88E6393X, erratum 4.8 has to be applied
every time before SerDes is powered on.
Split the code for erratum 4.8 into separate function and call it in
mv88e6393x_serdes_power().
Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While working on supporting the Intel HDR backlight interface, I noticed
that there's a couple of laptops that will very rarely manage to boot up
without detecting Intel HDR backlight support - even though it's supported
on the system. One example of such a laptop is the Lenovo P17 1st
generation.
Following some investigation Ville Syrjälä did through the docs they have
available to them, they discovered that there's actually supposed to be a
30ms wait after writing the source OUI before we begin setting up the rest
of the backlight interface.
This seems to be correct, as adding this 30ms delay seems to have
completely fixed the probing issues I was previously seeing. So - let's
start performing a 30ms wait after writing the OUI, which we do in a manner
similar to how we keep track of PPS delays (e.g. record the timestamp of
the OUI write, and then wait for however many ms are left since that
timestamp right before we interact with the backlight) in order to avoid
waiting any longer then we need to. As well, this also avoids us performing
this delay on systems where we don't end up using the HDR backlight
interface.
V3:
* Move last_oui_write into intel_dp
V2:
* Move panel delays into intel_pps
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Fixes: 4a8d79901d5b ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211130212912.212044-1-lyude@redhat.com
(cherry picked from commit c7c90b0b8418a97d3aa8b39aae1992908948efad)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
For previous version, it uses 'sg_table.nent's to traverse sg_table in pages
free flow.
However, 'sg_table.nents' is reassigned in 'dma_map_sg', it means the number of
created entries in the DMA adderess space.
So, use 'sg_table.nents' in pages free flow will case some pages can't be freed.
Here we should use sg_table.orig_nents to free pages memory, but use the
sgtable helper 'for each_sgtable_sg'(, instead of the previous rather common
helper 'for_each_sg' which maybe cause memory leak) is much better.
Fixes: d963ab0f15fb0 ("dma-buf: system_heap: Allocate higher order pages if available")
Signed-off-by: Guangming <Guangming.Cao@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Cc: <stable@vger.kernel.org> # 5.11.*
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211126074904.88388-1-guangming.cao@mediatek.com
|
|
mlx5e_build_shampo_hd_umr uses counters i and index incorrectly
as unsigned, thus the err state err_unmap could stuck in endless loop.
Change i to int to solve the first issue.
Reduce index check to solve the second issue, the caller function
validates that index could not rotate.
Fixes: 64509b052525 ("net/mlx5e: Add data path for SHAMPO feature")
Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Validate MRTC register is supported before triggering a delayed work
which accesses it.
Fixes: 5a1023deeed0 ("net/mlx5: Add periodic update of host time to firmware")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The log timestamp work should not be queued before the command interface
is initialized, move it to a later stage in the init flow.
Fixes: 5a1023deeed0 ("net/mlx5: Add periodic update of host time to firmware")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The device health recovery flow calls mlx5_health_wait_pci_up() which
queries the device for FW_RESET timeout after freeing the device
timeouts structure on mlx5_function_teardown(). Fix this bug by moving
timeouts structure init/cleanup to the device's init/uninit phases.
Since it is necessary to reset default software timeouts on function
reload, extract setting of defaults values from mlx5_tout_init() and
call mlx5_tout_set_def_val() directly from mlx5_function_setup().
Fixes: 5945e1adeab5 ("net/mlx5: Read timeout values from init segment")
Reported by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When adding rule with multiple destinations, indirect table is used for all of
the destinations if at least one of the destinations support it, this can cause
creation of invalid indirect tables for the destinations that doesn't support it.
Fixed it by using indirect table only if all destinations support it.
Fixes: a508728a4c8b ("net/mlx5e: VF tunnel RX traffic offloading")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
If log_esw_max_sched_depth is not supported group pointer of the vport
is NULL. Hence, check the pointer before reading bw_share value.
Fixes: 0fe132eac38c ("net/mlx5: E-switch, Allow to add vports to rate groups")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Always use MLX5_FLOW_TABLE_OTHER_VPORT flag when creating egress ACL
table for single FDB. Not doing so on BlueField will make firmware fail
the command. On BlueField the E-Switch manager is the ECPF (vport 0xFFFE)
which is filled in the flow table creation command but as the
other_vport field wasn't set the firmware complains about a bad parameter.
This is different from a regular HCA where the E-Switch manager vport is
the PF (vport 0x0). Passing MLX5_FLOW_TABLE_OTHER_VPORT will make the
firmware happy both on BlueField and on regular HCAs without special
condition for each.
This fixes the bellow firmware syndrome:
mlx5_cmd_check:819:(pid 571): CREATE_FLOW_TABLE(0x930) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x754a4)
Fixes: db202995f503 ("net/mlx5: E-Switch, add logic to enable shared FDB")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
To enable transmit schduler on vport FW require non-zero configuration
for vport's TSAR. If vport added to the group which has configured BW
share value and TX rate values of the vport are zero, then scheduler
wouldn't be enabled on this vport.
Fix that by calling BW normalization if BW share of the new group is
configured.
Fixes: 0fe132eac38c ("net/mlx5: E-switch, Allow to add vports to rate groups")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Driver needs to nullify the port select attributes of the LAG when
port selection is destroyed, otherwise it breaks recreation of the
LAG.
It fixes the below kernel oops:
[ 587.906377] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 587.908843] #PF: supervisor read access in kernel mode
[ 587.910730] #PF: error_code(0x0000) - not-present page
[ 587.912580] PGD 0 P4D 0
[ 587.913632] Oops: 0000 [#1] SMP PTI
[ 587.914644] CPU: 5 PID: 165 Comm: kworker/u20:5 Tainted: G OE 5.9.0_mlnx #1
[ 587.916152] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 587.918332] Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core]
[ 587.919479] RIP: 0010:mlx5_del_flow_rules+0x10/0x270 [mlx5_core]
[ 587.920568] mlx5_core 0000:08:00.1 enp8s0f1: Link up
[ 587.920680] Code: c0 09 80 a0 e8 cf 42 a4 e0 48 c7 c3 f4 ff ff ff e8 8a 88 dd e0 e9 ab fe ff ff 0f 1f 44 00 00 41 56 41 55 49 89 fd 41 54 55 53 <48> 8b 47 08 48 8b 68 28 48 85 ed 74 2e 48 8d 7d 38 e8 6a 64 34 e1
[ 587.925116] bond0: (slave enp8s0f1): Enslaving as an active interface with an up link
[ 587.930415] RSP: 0018:ffffc9000048fd88 EFLAGS: 00010282
[ 587.930417] RAX: ffff88846c14fac0 RBX: ffff88846cddcb80 RCX: 0000000080400007
[ 587.930417] RDX: 0000000080400008 RSI: ffff88846cddcb80 RDI: 0000000000000000
[ 587.930419] RBP: ffff88845fd80140 R08: 0000000000000001 R09: ffffffffa074ba00
[ 587.938132] R10: ffff88846c14fec0 R11: 0000000000000001 R12: ffff88846c122f10
[ 587.939473] R13: 0000000000000000 R14: 0000000000000001 R15: ffff88846d7a0000
[ 587.940800] FS: 0000000000000000(0000) GS:ffff88846fa80000(0000) knlGS:0000000000000000
[ 587.942416] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 587.943536] CR2: 0000000000000008 CR3: 000000000240a002 CR4: 0000000000770ee0
[ 587.944904] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 587.946308] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 587.947639] PKRU: 55555554
[ 587.948236] Call Trace:
[ 587.948834] mlx5_lag_destroy_definer.isra.3+0x16/0x90 [mlx5_core]
[ 587.950033] mlx5_lag_destroy_definers+0x5b/0x80 [mlx5_core]
[ 587.951128] mlx5_deactivate_lag+0x6e/0x80 [mlx5_core]
[ 587.952146] mlx5_do_bond+0x150/0x450 [mlx5_core]
[ 587.953086] mlx5_do_bond_work+0x3e/0x50 [mlx5_core]
[ 587.954086] process_one_work+0x1eb/0x3e0
[ 587.954899] worker_thread+0x2d/0x3c0
[ 587.955656] ? process_one_work+0x3e0/0x3e0
[ 587.956493] kthread+0x115/0x130
[ 587.957174] ? kthread_park+0x90/0x90
[ 587.957929] ret_from_fork+0x1f/0x30
[ 587.973055] ---[ end trace 71ccd6eca89f5513 ]---
Fixes: b7267869e923 ("net/mlx5: Lag, add support to create/destroy/modify port selection")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When the device is in internal error state, command interface isn't
accessible and the driver decides which commands to fail and which
to ignore.
Move the MODIFY_RQT command to the ignore list in order to avoid
the following redundant warning messages in internal error state:
mlx5_core 0000:82:00.1: mlx5e_rss_disable:419:(pid 23754): Failed to redirect RQT 0x0 to drop RQ 0xc00848: err = -5
mlx5_core 0000:82:00.1: mlx5e_rx_res_channels_deactivate:598:(pid 23754): Failed to redirect direct RQT 0x1 to drop RQ 0xc00848 (channel 0): err = -5
mlx5_core 0000:82:00.1: mlx5e_rx_res_channels_deactivate:607:(pid 23754): Failed to redirect XSK RQT 0x19 to drop RQ 0xc00848 (channel 0): err = -5
Fixes: 43ec0f41fa73 ("net/mlx5e: Hide all implementation details of mlx5e_rx_res")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Transport Interface Receive (TIR) objects perform the packet processing and
reassembly and is also responsible for demultiplexing the packets into the
different RQs.
There are certain TIR context attributes that propagate to the pointed RQs
and applied to them (like packet_merge offloads (LRO/SHAMPO) and
tunneled_offload_en). When TIRs do not agree on attributes values, a "last
one wins" policy is applied. Hence, if not synced properly, a race between
TIR params update and a concurrent TIR create/modify operation might yield
to a mismatch between the shadow parameters in SW and the actual applied
state of the RQs in HW.
tunneled_offload_en is a fixed attribute per profile, while packet merge
offload state might be toggled and get out-of-sync. When this happens,
packet_merge offload might be working although not requested, or the
opposite.
All updates to packet_merge state and all create/modify operations of
regular redirection/steering TIRs are done under the same priv->state_lock,
so they do not run in parallel, and no race is possible.
However, there are other kind of TIRs (acceleration offloads TIRs, like TLS
TIRs) which are created on demand for each new connection without holding
the coarse priv->state_lock, hence might race.
Fix this by synchronizing all packet_merge state reads and writes against
all TIR create/modify operations. Include the modify operations of the
regular redirection steering TIRs under the new lock, for better code
layering and division of responsibilities.
Fixes: 1182f3659357 ("net/mlx5e: kTLS, Add kTLS RX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The cited patch added the IPsec support to uplink representor, however
as uplink representors have his private statistics where IPsec stats
is not part of it, that effectively makes IPsec stats hidden when uplink
representor stats queried.
Resolve by adding IPsec stats to uplink representor private statistics.
Fixes: 5589b8f1a2c7 ("net/mlx5e: Add IPsec support to uplink representor")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Alaa Hleihel <alaa@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
encapsulation
Current code wrongly uses the skb->protocol field which reflects the
outer l3 protocol to set the inner l3 type in Software Parser (SWP)
fields settings in the ethernet segment (eseg) in flows where inner
l3 exists like in Vxlan over ESP flow, the above method wrongly use
the outer protocol type instead of the inner one. thus breaking cases
where inner and outer headers have different protocols.
Fix by setting the inner l3 type in SWP according to the inner l3 ip
header version.
Fixes: 2ac9cfe78223 ("net/mlx5e: IPSec, Add Innova IPSec offload TX data path")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Fix section mismatch warnings in xtsonic. The first one appears to be
bogus and after fixing the second one, the first one is gone.
WARNING: modpost: vmlinux.o(.text+0x529adc): Section mismatch in reference from the function sonic_get_stats() to the function .init.text:set_reset_devices()
The function sonic_get_stats() references
the function __init set_reset_devices().
This is often because sonic_get_stats lacks a __init
annotation or the annotation of set_reset_devices is wrong.
WARNING: modpost: vmlinux.o(.text+0x529b3b): Section mismatch in reference from the function xtsonic_probe() to the function .init.text:sonic_probe1()
The function xtsonic_probe() references
the function __init sonic_probe1().
This is often because xtsonic_probe lacks a __init
annotation or the annotation of sonic_probe1 is wrong.
Fixes: 74f2a5f0ef64 ("xtensa: Add support for the Sonic Ethernet device for the XT2000 board.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Chris Zankel <chris@zankel.net>
Cc: linux-xtensa@linux-xtensa.org
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20211130063947.7529-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a typical read transfer, start completion flag is being set after
read finishes (notice ipd bit 4 being set):
trasnfer poll=0
i2c start
rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10
i2c read
rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b
i2c stop
rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 33
This causes I2C transfer being aborted in polled mode from a stop completion
handler:
trasnfer poll=1
i2c start
rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10
i2c read
rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 0
rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b
i2c stop
rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 13
i2c stop
rk3x-i2c fdd40000.i2c: unexpected irq in STOP: 0x10
Clearing the START flag after read fixes the issue without any obvious
side effects.
This issue was dicovered on RK3566 when adding support for powering
off the RK817 PMIC.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
|
|
This is to fix incorrect pointer arithmetic which caused wrong
OpRegion version returned, then VM driver got error to get wanted
VBT block. We need to be safe to return correct data, so force
pointer type for byte access.
Fixes: 49ba1a2976c8 ("vfio/pci: Add OpRegion 2.0+ Extended VBT support.")
Cc: Colin Xu <colin.xu@gmail.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dmitry Torokhov <dtor@chromium.org>
Cc: "Xu, Terrence" <terrence.xu@intel.com>
Cc: "Gao, Fred" <fred.gao@intel.com>
Acked-by: Colin Xu <colin.xu@gmail.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://lore.kernel.org/r/20211125051328.3359902-1-zhenyuw@linux.intel.com
[aw: line wrap]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
vfio.c abuses (misuses) "/**", which indicates the beginning of
kernel-doc notation in the kernel tree. This causes a bunch of
kernel-doc complaints about this source file, so quieten all of
them by changing all "/**" to "/*".
vfio.c:236: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* IOMMU driver registration
vfio.c:236: warning: missing initial short description on line:
* IOMMU driver registration
vfio.c:295: warning: expecting prototype for Container objects(). Prototype was for vfio_container_get() instead
vfio.c:317: warning: expecting prototype for Group objects(). Prototype was for __vfio_group_get_from_iommu() instead
vfio.c:496: warning: Function parameter or member 'device' not described in 'vfio_device_put'
vfio.c:496: warning: expecting prototype for Device objects(). Prototype was for vfio_device_put() instead
vfio.c:599: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Async device support
vfio.c:599: warning: missing initial short description on line:
* Async device support
vfio.c:693: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* VFIO driver API
vfio.c:693: warning: missing initial short description on line:
* VFIO driver API
vfio.c:835: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Get a reference to the vfio_device for a device. Even if the
vfio.c:835: warning: missing initial short description on line:
* Get a reference to the vfio_device for a device. Even if the
vfio.c:969: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* VFIO base fd, /dev/vfio/vfio
vfio.c:969: warning: missing initial short description on line:
* VFIO base fd, /dev/vfio/vfio
vfio.c:1187: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* VFIO Group fd, /dev/vfio/$GROUP
vfio.c:1187: warning: missing initial short description on line:
* VFIO Group fd, /dev/vfio/$GROUP
vfio.c:1540: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* VFIO Device fd
vfio.c:1540: warning: missing initial short description on line:
* VFIO Device fd
vfio.c:1615: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* External user API, exported by symbols to be linked dynamically.
vfio.c:1615: warning: missing initial short description on line:
* External user API, exported by symbols to be linked dynamically.
vfio.c:1663: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* External user API, exported by symbols to be linked dynamically.
vfio.c:1663: warning: missing initial short description on line:
* External user API, exported by symbols to be linked dynamically.
vfio.c:1742: warning: Function parameter or member 'caps' not described in 'vfio_info_cap_add'
vfio.c:1742: warning: Function parameter or member 'size' not described in 'vfio_info_cap_add'
vfio.c:1742: warning: Function parameter or member 'id' not described in 'vfio_info_cap_add'
vfio.c:1742: warning: Function parameter or member 'version' not described in 'vfio_info_cap_add'
vfio.c:1742: warning: expecting prototype for Sub(). Prototype was for vfio_info_cap_add() instead
vfio.c:2276: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Module/class support
vfio.c:2276: warning: missing initial short description on line:
* Module/class support
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: kvm@vger.kernel.org
Link: https://lore.kernel.org/r/38a9cb92-a473-40bf-b8f9-85cc5cfc2da4@infradead.org
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The commit c55211892f46 ("dpaa2-eth: support PTP Sync packet one-step
timestamping") forgets to destroy workqueue at the end of remove
function.
Fix this by adding destroy_workqueue before fsl_mc_portal_free and
free_netdev.
Fixes: c55211892f46 ("dpaa2-eth: support PTP Sync packet one-step timestamping")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix a bug in which the receiving of packets can stop in the zero-copy
driver. Ice HW ignores 3 lower bits from QRX_TAIL register, which means
that tail is bumped only on intervals of 8. Currently with XSK RX
batching in place, ice_alloc_rx_bufs_zc() clears the status_error0 only
of the last descriptor that has been allocated/taken from the XSK buffer
pool. status_error0 includes DD bit that is looked upon by the
ice_clean_rx_irq_zc() to tell if a descriptor can be processed.
The bug can be triggered when driver updates the ntu but not the
QRX_TAIL, so HW wouldn't have a chance to write to the ready
descriptors. Later on driver moves the ntc to the mentioned set of
descriptors and interprets them as a ready to be processed, since
corresponding DD bits were not cleared nor any writeback has happened
that would clear it. This can then lead to ntc == ntu case which means
that ring is empty and no further packet processing.
Fix the XSK traffic hang that can be observed when l2fwd scenario from
xdpsock is used by making sure that status_error0 is cleared for each
descriptor that is fed to HW and therefore we are sure that driver will
not processed non-valid DD bits. This will also prevent the driver from
processing the descriptors that were allocated in favor of the
previously processed ones, but writeback didn't happen yet.
Fixes: db804cfc21e9 ("ice: Use the xsk batched rx allocation interface")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'bitmap_fill()' fills a bitmap one 'long' at a time.
It is likely that an exact number of bits is expected.
Use 'bitmap_set()' instead in order not to set unexpected bits.
Fixes: e531f76757eb ("net: mvpp2: handle cases where more CPUs are available than s/w threads")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'venus_probe()'
A successful 'of_platform_populate()' call should be balanced by a
corresponding 'of_platform_depopulate()' call in the error handling path
of the probe, as already done in the remove function.
A successful 'venus_firmware_init()' call should be balanced by a
corresponding 'venus_firmware_deinit()' call in the error handling path
of the probe, as already done in the remove function.
Update the error handling path accordingly.
Fixes: f9799fcce4bb ("media: venus: firmware: register separate platform_device for firmware loader")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
handling path
The normal path of the function makes the assumption that
'pm_ops->core_power' may be NULL.
We should make the same assumption in the error handling path or a NULL
pointer dereference may occur.
Add the missing test before calling 'pm_ops->core_power'
Fixes: 9e8efdb57879 ("media: venus: core: vote for video-mem path")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
concurrent video sessions
In existing implementation, core_clk_setrate() is getting called
concurrently in concurrent video sessions. Before the previous call to
core_clk_setrate returns, new call to core_clk_setrate is invoked from
another video session running concurrently. This results in latest
calculated frequency being set (higher/lower) instead of actual frequency
required for that video session. It also results in stability crashes
mention below. These resources are specific to video core, hence keeping
under core lock would ensure that they are estimated for all running video
sessions and called once for the video core.
Crash logs:
[ 1.900089] WARNING: CPU: 4 PID: 1 at drivers/opp/debugfs.c:33 opp_debug_remove_one+0x2c/0x48
[ 1.908493] Modules linked in:
[ 1.911524] CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.10.67 #35 f8edb8c30cf2dd6838495dd9ef9be47af7f5f60c
[ 1.921036] Hardware name: Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform (DT)
[ 1.928673] pstate: 60800009 (nZCv daif -PAN +UAO -TCO BTYPE=--)
[ 1.934608] pc : opp_debug_remove_one+0x2c/0x48
[ 1.939080] lr : opp_debug_remove_one+0x2c/0x48
[ 1.943560] sp : ffffffc011d7b7f0
[ 1.946836] pmr_save: 000000e0
[ 1.949854] x29: ffffffc011d7b7f0 x28: ffffffc010733bbc
[ 1.955104] x27: ffffffc010733ba8 x26: ffffff8083cedd00
[ 1.960355] x25: 0000000000000001 x24: 0000000000000000
[ 1.965603] x23: ffffff8083cc2878 x22: ffffff8083ceb900
[ 1.970852] x21: ffffff8083ceb910 x20: ffffff8083cc2800
[ 1.976101] x19: ffffff8083ceb900 x18: 00000000ffff0a10
[ 1.981352] x17: ffffff80837a5620 x16: 00000000000000ec
[ 1.986601] x15: ffffffc010519ad4 x14: 0000000000000003
[ 1.991849] x13: 0000000000000004 x12: 0000000000000001
[ 1.997100] x11: c0000000ffffdfff x10: 00000000ffffffff
[ 2.002348] x9 : d2627c580300dc00 x8 : d2627c580300dc00
[ 2.007596] x7 : 0720072007200720 x6 : ffffff80802ecf00
[ 2.012845] x5 : 0000000000190004 x4 : 0000000000000000
[ 2.018094] x3 : ffffffc011d7b478 x2 : ffffffc011d7b480
[ 2.023343] x1 : 00000000ffffdfff x0 : 0000000000000017
[ 2.028594] Call trace:
[ 2.031022] opp_debug_remove_one+0x2c/0x48
[ 2.035160] dev_pm_opp_put+0x94/0xb0
[ 2.038780] _opp_remove_all+0x7c/0xc8
[ 2.042486] _opp_remove_all_static+0x54/0x7c
[ 2.046796] dev_pm_opp_remove_table+0x74/0x98
[ 2.051183] devm_pm_opp_of_table_release+0x18/0x24
[ 2.056001] devm_action_release+0x1c/0x28
[ 2.060053] release_nodes+0x23c/0x2b8
[ 2.063760] devres_release_group+0xcc/0xd0
[ 2.067900] component_bind+0xac/0x168
[ 2.071608] component_bind_all+0x98/0x124
[ 2.075664] msm_drm_bind+0x1e8/0x678
[ 2.079287] try_to_bring_up_master+0x60/0x134
[ 2.083674] component_master_add_with_match+0xd8/0x120
[ 2.088834] msm_pdev_probe+0x20c/0x2a0
[ 2.092629] platform_drv_probe+0x9c/0xbc
[ 2.096598] really_probe+0x11c/0x46c
[ 2.100217] driver_probe_device+0x8c/0xf0
[ 2.104270] device_driver_attach+0x54/0x78
[ 2.108407] __driver_attach+0x48/0x148
[ 2.112201] bus_for_each_dev+0x88/0xd4
[ 2.115998] driver_attach+0x2c/0x38
[ 2.119534] bus_add_driver+0x10c/0x200
[ 2.123330] driver_register+0x6c/0x104
[ 2.127122] __platform_driver_register+0x4c/0x58
[ 2.131767] msm_drm_register+0x6c/0x70
[ 2.135560] do_one_initcall+0x64/0x23c
[ 2.139357] do_initcall_level+0xac/0x15c
[ 2.143321] do_initcalls+0x5c/0x9c
[ 2.146778] do_basic_setup+0x2c/0x38
[ 2.150401] kernel_init_freeable+0xf8/0x15c
[ 2.154622] kernel_init+0x1c/0x11c
[ 2.158079] ret_from_fork+0x10/0x30
[ 2.161615] ---[ end trace a2cc45a0f784b212 ]---
[ 2.166272] Removing OPP: 300000000
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
In exististing implimentation, in min_loaded_core() for low_power
vpp frequency value is considering as vpp_freq instead of low_power_freq.
Fixed this by correcting vpp frequency calculation for encoder.
Fixes: 3cfe5815ce0e (media: venus: Enable low power setting for encoder)
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add missing documentation for two field. This fixes these kernel-doc
warnings:
drivers/media/platform/omap3isp/omap3isp.h:107: warning: Function parameter or member 'vp_clk_pol' not described in 'isp_ccp2_cfg'
drivers/media/platform/omap3isp/omap3isp.h:107: warning: Function parameter or member 'lanecfg' not described in 'isp_ccp2_cfg'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fix these smatch warnings:
drivers/media/usb/pvrusb2/pvrusb2-encoder.c:288 pvr2_encoder_cmd() warn: inconsistent indenting
drivers/media/usb/pvrusb2/pvrusb2-hdw.c:1730 pvr2_hdw_set_streaming() warn: inconsistent indenting
drivers/media/usb/pvrusb2/pvrusb2-hdw.c:3461 pvr2_hdw_cpufw_set_enabled() warn: inconsistent indenting
drivers/media/usb/pvrusb2/pvrusb2-hdw.c:3501 pvr2_hdw_cpufw_get() warn: inconsistent indenting
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
smatch warns about data->list not being removed from list:
drivers/media/cec/core/cec-adap.c:926 cec_transmit_msg_fh() warn: '&data->list' not removed from list
It is a false warning, but it doesn't hurt to make the code more robust
and safely unhook data->list and data->xfer_list together with a WARN_ON
if this is actually ever needed (this really shouldn't happen).
Note that fixing the data->list warning just replaced it with a new similar
warning for data->xfer_list, so both needed to be addressed.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Stop the CODA960 JPEG encoder from overflowing capture buffers.
The bitstream buffer overflow interrupt doesn't seem to be connected,
so this has to be handled via timeout instead.
Reported-by: Martin Weber <martin.weber@br-automation.com>
Fixes: 96f6f62c4656 ("media: coda: jpeg: add CODA960 JPEG encoder support")
Tested-by: Martin Weber <martin.weber@br-automation.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The JPEG encoder found in the Hantro H1 encoder block only produces a
raw entropy-encoded scan. The driver is responsible for building a JPEG
compliant bitstream and placing the entropy-encoded scan in it. Right
now the driver uses a bounce buffer for the hardware to output the raw
scan to.
In commit e765dba11ec2 ("hantro: Move hantro_enc_buf_finish to JPEG
codec_ops.done"), the code that copies the raw scan from the bounce
buffer to the capture buffer was moved, but was only hooked up for the
Hantro H1 (then RK3288) variant. The RK3399 variant was broken,
producing a JPEG bitstream without the scan, and the capture buffer's
.bytesused field unset.
Fix this by duplicating the code that is executed when the JPEG encoder
finishes encoding a frame. As the encoded length is read back from
hardware, and the variants having different register layouts, the
code is duplicated rather than shared.
Fixes: e765dba11ec2 ("hantro: Move hantro_enc_buf_finish to JPEG codec_ops.done")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The function mtk_venc_get_q_data always returns a reference
so there is no need to check if the return value is null.
In addition move the q_data initialization to the declaration
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The function vidioc_try_fmt has a big 'if-else' for
the capture and output cases. There is hardly any code
outside of that condition. It is therefore better to split
that functions into two different functions, one for each case.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The mtk-vcodec uses some internal defined debug formats for
printing. This patch fixes some things in those defines:
1. use the 'pr_fmt' define to print function name and line.
2. remove 'if(DEBUG)' condition for the defines. This condition
prevents the debugs from being shown in case of dynamic debugs.
Instead replace 'pr_info' with 'pr_debug'
3. remove module parameters that enable/disable debug.
There is no reason for the driver to have those params. Having
those params require the user to explicitly set them when user
wants to see debug prints instead of using the global debugs
setting as expected by drivers to conform.
In addition to that, fix some warnings about debug formatting
[hverkuil: used %zu instead of %lu for sizeof() arguments]
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The func v4l2_m2m_ctx_release waits for currently running jobs
to finish and then stop streaming both queues and frees the buffers.
All this should be done before the call to mtk_vcodec_enc_release
which frees the encoder handler. This fixes null-pointer dereference bug:
[ 638.028076] Mem abort info:
[ 638.030932] ESR = 0x96000004
[ 638.033978] EC = 0x25: DABT (current EL), IL = 32 bits
[ 638.039293] SET = 0, FnV = 0
[ 638.042338] EA = 0, S1PTW = 0
[ 638.045474] FSC = 0x04: level 0 translation fault
[ 638.050349] Data abort info:
[ 638.053224] ISV = 0, ISS = 0x00000004
[ 638.057055] CM = 0, WnR = 0
[ 638.060018] user pgtable: 4k pages, 48-bit VAs, pgdp=000000012b6db000
[ 638.066485] [00000000000001a0] pgd=0000000000000000, p4d=0000000000000000
[ 638.073277] Internal error: Oops: 96000004 [#1] SMP
[ 638.078145] Modules linked in: rfkill mtk_vcodec_dec mtk_vcodec_enc uvcvideo mtk_mdp mtk_vcodec_common videobuf2_dma_contig v4l2_h264 cdc_ether v4l2_mem2mem videobuf2_vmalloc usbnet videobuf2_memops videobuf2_v4l2 r8152 videobuf2_common videodev cros_ec_sensors cros_ec_sensors_core industrialio_triggered_buffer kfifo_buf elan_i2c elants_i2c sbs_battery mc cros_usbpd_charger cros_ec_chardev cros_usbpd_logger crct10dif_ce mtk_vpu fuse ip_tables x_tables ipv6
[ 638.118583] CPU: 0 PID: 212 Comm: kworker/u8:5 Not tainted 5.15.0-06427-g58a1d4dcfc74-dirty #109
[ 638.127357] Hardware name: Google Elm (DT)
[ 638.131444] Workqueue: mtk-vcodec-enc mtk_venc_worker [mtk_vcodec_enc]
[ 638.137974] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 638.144925] pc : vp8_enc_encode+0x34/0x2b0 [mtk_vcodec_enc]
[ 638.150493] lr : venc_if_encode+0xac/0x1b0 [mtk_vcodec_enc]
[ 638.156060] sp : ffff8000124d3c40
[ 638.159364] x29: ffff8000124d3c40 x28: 0000000000000000 x27: 0000000000000000
[ 638.166493] x26: 0000000000000000 x25: ffff0000e7f252d0 x24: ffff8000124d3d58
[ 638.173621] x23: ffff8000124d3d58 x22: ffff8000124d3d60 x21: 0000000000000001
[ 638.180750] x20: ffff80001137e000 x19: 0000000000000000 x18: 0000000000000001
[ 638.187878] x17: 000000040044ffff x16: 00400032b5503510 x15: 0000000000000000
[ 638.195006] x14: ffff8000118536c0 x13: ffff8000ee1da000 x12: 0000000030d4d91d
[ 638.202134] x11: 0000000000000000 x10: 0000000000000980 x9 : ffff8000124d3b20
[ 638.209262] x8 : ffff0000c18d4ea0 x7 : ffff0000c18d44c0 x6 : ffff0000c18d44c0
[ 638.216391] x5 : ffff80000904a3b0 x4 : ffff8000124d3d58 x3 : ffff8000124d3d60
[ 638.223519] x2 : ffff8000124d3d78 x1 : 0000000000000001 x0 : ffff80001137efb8
[ 638.230648] Call trace:
[ 638.233084] vp8_enc_encode+0x34/0x2b0 [mtk_vcodec_enc]
[ 638.238304] venc_if_encode+0xac/0x1b0 [mtk_vcodec_enc]
[ 638.243525] mtk_venc_worker+0x110/0x250 [mtk_vcodec_enc]
[ 638.248918] process_one_work+0x1f8/0x498
[ 638.252923] worker_thread+0x140/0x538
[ 638.256664] kthread+0x148/0x158
[ 638.259884] ret_from_fork+0x10/0x20
[ 638.263455] Code: f90023f9 2a0103f5 aa0303f6 aa0403f8 (f940d277)
[ 638.269538] ---[ end trace e374fc10f8e181f5 ]---
[gst-master] root@debian:~/gst-build# [ 638.019193] Unable to handle kernel NULL pointer dereference at virtual address 00000000000001a0
Fixes: 4e855a6efa547 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The print function dev_err() is redundant because
platform_get_irq() already prints an error.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fix following boolreturn.cocci warning:
./drivers/staging/media/imx/imx-media-csi.c:153:9-10: WARNING:
return of 0/1 in function 'requires_passthrough' with return
type bool.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Register misc device in the end of driver's probing since device should
become visible to userspace once driver is fully prepared. Do the opposite
in case of driver removal. This is a minor improvement that doesn't solve
any problem, but makes code more consistent.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Entries in the reference picture list are marked as invalid by setting
the frame ID to 0x3f.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
