summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-12-28USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk setMichael Grzeschik
The commit 0472bf06c6fd ("xhci: Prevent U1/U2 link pm states if exit latency is too long") was constraining the xhci code not to allow U1/U2 sleep states if the latency to wake up from the U-states reached the service interval of an periodic endpoint. This fix was not taking into account that in case the quirk XHCI_INTEL_HOST is set, the wakeup time will be calculated and configured differently. It checks for u1_params.mel/u2_params.mel as a limit. But the code could decide to write another MEL into the hardware. This leads to broken cases where not enough bandwidth is available for other devices: usb 1-2: can't set config #1, error -28 This patch is fixing that case by checking for timeout_ns after the wakeup time was calculated depending on the quirks. Fixes: 0472bf06c6fd ("xhci: Prevent U1/U2 link pm states if exit latency is too long") Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201215193147.11738-1-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-28usb: typec: intel_pmc_mux: Configure HPD first for HPD+IRQ requestMadhusudanarao Amara
Warm reboot scenarios some times type C Mux driver gets Mux configuration request as HPD=1,IRQ=1. In that scenario typeC Mux driver need to configure Mux as follows as per IOM requirement: (1). Confgiure Mux HPD = 1, IRQ = 0 (2). Configure Mux with HPD = 1, IRQ = 1 IOM expects TypeC Mux configuration as follows: (1). HPD=1, IRQ=0 (2). HPD=1, IRQ=1 if IOM gets mux config request (2) without configuring (1), it will ignore the request. The impact of this is there is no DP_alt mode display. Fixes: 43d596e32276 ("usb: typec: intel_pmc_mux: Check the port status before connect") Cc: stable@vger.kernel.org Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Madhusudanarao Amara <madhusudanarao.amara@intel.com> Link: https://lore.kernel.org/r/20201216140918.49197-1-madhusudanarao.amara@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-28USB: cdc-wdm: Fix use after free in service_outstanding_interrupt().Tetsuo Handa
syzbot is reporting UAF at usb_submit_urb() [1], for service_outstanding_interrupt() is not checking WDM_DISCONNECTING before calling usb_submit_urb(). Close the race by doing same checks wdm_read() does upon retry. Also, while wdm_read() checks WDM_DISCONNECTING with desc->rlock held, service_interrupt_work() does not hold desc->rlock. Thus, it is possible that usb_submit_urb() is called from service_outstanding_interrupt() from service_interrupt_work() after WDM_DISCONNECTING was set and kill_urbs() from wdm_disconnect() completed. Thus, move kill_urbs() in wdm_disconnect() to after cancel_work_sync() (which makes sure that service_interrupt_work() is no longer running) completed. Although it seems to be safe to dereference desc->intf->dev in service_outstanding_interrupt() even if WDM_DISCONNECTING was already set because desc->rlock or cancel_work_sync() prevents wdm_disconnect() from reaching list_del() before service_outstanding_interrupt() completes, let's not emit error message if WDM_DISCONNECTING is set by wdm_disconnect() while usb_submit_urb() is in progress. [1] https://syzkaller.appspot.com/bug?extid=9e04e2df4a32fb661daf Reported-by: syzbot <syzbot+9e04e2df4a32fb661daf@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/620e2ee0-b9a3-dbda-a25b-a93e0ed03ec5@i-love.sakura.ne.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-28usb: gadget: fsl_mxc_udc: Remove the driverFabio Estevam
Since 5.10-rc1 i.MX is a devicetree-only platform, and this driver was only used by the old non-DT i.MX devices. Remove the driver as it has no users left. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20201210210413.15262-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-28USB: cdc-acm: blacklist another IR Droid deviceSean Young
This device is supported by the IR Toy driver. Reported-by: Georgi Bakalski <georgi.bakalski@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201227134502.4548-2-sean@mess.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-28Merge tag 'v5.11-rc1' into spi-5.11Mark Brown
Linux 5.11-rc1
2020-12-28Merge tag 'v5.11-rc1' into regulator-5.11Mark Brown
Linux 5.11-rc1
2020-12-28staging: mt7621-dma: Fix a resource leak in an error handling pathChristophe JAILLET
If an error occurs after calling 'mtk_hsdma_init()', it must be undone by a corresponding call to 'mtk_hsdma_uninit()' as already done in the remove function. Fixes: 0853c7a53eb3 ("staging: mt7621-dma: ralink: add rt2880 dma engine") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201213153513.138723-1-christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-28Staging: comedi: Return -EFAULT if copy_to_user() failsDan Carpenter
Return -EFAULT on error instead of the number of bytes remaining to be copied. Fixes: bac42fb21259 ("comedi: get rid of compat_alloc_user_space() mess in COMEDI_CMD{,TEST} compat") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/X8c3pfwFy2jpy4BP@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-28staging: spmi: hisi-spmi-controller: Fix some error handling pathsChristophe JAILLET
IN the probe function, if an error occurs after calling 'spmi_controller_alloc()', it must be undone by a corresponding 'spmi_controller_put() call. In the remove function, use 'spmi_controller_put(ctrl)' instead of 'kfree(ctrl)'. While a it fix an error message (s/spmi_add_controller/spmi_controller_add/) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201213151105.137731-1-christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-28interconnect: imx8mq: Use icc_sync_stateMartin Kepplinger
Add the icc_sync_state callback to notify the framework when consumers are probed and the bandwidth doesn't have to be kept at maximum anymore. Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Suggested-by: Georgi Djakov <georgi.djakov@linaro.org> Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Link: https://lore.kernel.org/r/20201210100906.18205-6-martin.kepplinger@puri.sm Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-12-28interconnect: imx: Remove a useless testChristophe JAILLET
'dn' can't be NULL here, it is tested just the line above. Remove this useless test. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201206121322.29434-1-christophe.jaillet@wanadoo.fr Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-12-28interconnect: imx: Add a missing of_node_put after of_device_is_availableChristophe JAILLET
Add an 'of_node_put()' call when a tested device node is not available. Fixes: f0d8048525d7 ("interconnect: Add imx core driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201206121304.29381-1-christophe.jaillet@wanadoo.fr Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-12-28interconnect: qcom: fix rpmh link failuresArnd Bergmann
When CONFIG_COMPILE_TEST is set, it is possible to build some of the interconnect drivers into the kernel while their dependencies are loadable modules, which is bad: arm-linux-gnueabi-ld: drivers/interconnect/qcom/bcm-voter.o: in function `qcom_icc_bcm_voter_commit': (.text+0x1f8): undefined reference to `rpmh_invalidate' arm-linux-gnueabi-ld: (.text+0x20c): undefined reference to `rpmh_write_batch' arm-linux-gnueabi-ld: (.text+0x2b0): undefined reference to `rpmh_write_batch' arm-linux-gnueabi-ld: (.text+0x2e8): undefined reference to `rpmh_write_batch' arm-linux-gnueabi-ld: drivers/interconnect/qcom/icc-rpmh.o: in function `qcom_icc_bcm_init': (.text+0x2ac): undefined reference to `cmd_db_read_addr' arm-linux-gnueabi-ld: (.text+0x2c8): undefined reference to `cmd_db_read_aux_data' The exact dependencies are a bit complicated, so split them out into a hidden Kconfig symbol that all drivers can in turn depend on to get it right. Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201204165030.3747484-1-arnd@kernel.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-12-28habanalabs: fix order of status checkOded Gabbay
When the device is in reset or needs to be reset, the disabled property is don't-care. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28habanalabs: register to pci shutdown callbackOded Gabbay
We need to make sure our device is idle when rebooting a virtual machine. This is done in the driver level. The firmware will later handle FLR but we want to be extra safe and stop the devices until the FLR is handled. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28habanalabs: add validation cs counter, fix misplaced countersAlon Mizrahi
Up until now validation errors were counted in the parsing field of the cs_counters struct, so we added a new counter and increased it when needed. In addition, there were some locations where only one of the counters was updated (ctx or aggregate) so add the second one to be updated as well. Signed-off-by: Alon Mizrahi <amizrahi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28habanalabs/gaudi: retry loading TPC f/w on -EINTROded Gabbay
If loading the firmware file for the TPC f/w was interrupted, try to do it again, up to 5 times. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28habanalabs: adjust pci controller init to new firmwareOded Gabbay
When the firmware security is enabled, the pcie_aux_dbi_reg_addr register in the PCI controller is blocked. Therefore, ignore the result of writing to this register and assume it worked. Also remove the prints on errors in the internal ELBI write function. If the security is enabled, the firmware is responsible for setting this register correctly so we won't have any problem. If the security is disabled, the write will work (unless something is totally broken at the PCI level and then the whole sequence will fail). In addition, remove a write to register pcie_aux_dbi_reg_addr+4, which was never actually needed. Moreover, PCIE_DBI registers are blocked to access from host when firmware security is enabled. Use a different register to flush the writes. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28habanalabs: update comment in hl_boot_if.hOded Gabbay
Hard-reset flag is updated in many stages of the boot sequence of the firmware. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28habanalabs/gaudi: enhance reset messageOded Gabbay
Print the initiator who performs the hard-reset for easier debugging. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28habanalabs: full FW hard reset supportOfir Bitton
Driver must fetch FW hard reset capability at every FW boot stage: preboot, CPU boot, CPU application. If hard reset is triggered, driver will take into consideration only the last capability received. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28habanalabs/gaudi: disable CGM at HW initializationOded Gabbay
In case the clock gating was enabled in preboot we need to disable it at the H/W initialization stage before touching the MME/TPC registers. Otherwise, the ASIC can get stuck. If the security is enabled in the firmware level, the CGM is always disabled and the driver can't enable it. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28habanalabs: Revise comment to align with mirror list nameTomer Tayar
hw_queues_mirror was renamed to cs_mirror, so revise accordingly a comment that refers to this list. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28habanalabs/gaudi: do not set EB in collective slave queuesAlon Mizrahi
We don't need to set EB on signal packets from collective slave queues as it degrades performance. Because the slaves are the network queues, the engine barrier doesn't actually guarantee that the packet has been sent. Signed-off-by: Alon Mizrahi <amizrahi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28habanalabs: preboot hard reset supportOfir Bitton
FW hard reset capability indication is now moved to preboot stage. Driver will check if HW is dirty only after it validated preboot is up. If HW is dirty, driver will perform a hard reset according to the FW capability. In addition, FW defines a new message which driver need to send in order to initiate a hard reset. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28habanalabs: remove generic gaudi get_pll_freq functionAlon Mizrahi
As we only fetch the CPU_PLL frequency in gaudi, we don't need a generic get_pll_frequency function which takes a pll index as input Signed-off-by: Alon Mizrahi <amizrahi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28habanalabs: fetch PSOC PLL frequency from F/W in goyaAlon Mizrahi
When the F/W security is enabled, goya needs to fetch the PSOC pll frequency through a dedicated interface Signed-off-by: Alon Mizrahi <amizrahi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28habanalabs: Fix a missing-braces warningTomer Tayar
Fix a compilation "missing braces around initializer" warning. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28opp: Call the missing clk_put() on errorViresh Kumar
Fix the clock reference counting by calling the missing clk_put() in the error path. Cc: v5.10 <stable@vger.kernel.org> # v5.10 Fixes: dd461cd9183f ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER") Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-28opp: fix memory leak in _allocate_opp_tableQuanyang Wang
In function _allocate_opp_table, opp_dev is allocated and referenced by opp_table via _add_opp_dev. But in the case that the subsequent calls return -EPROBE_DEFER, it will jump to err label and opp_table will be freed. Then opp_dev becomes an unreferenced object to cause memory leak. So let's call _remove_opp_dev to do the cleanup. This fixes the following kmemleak report: unreferenced object 0xffff000801524a00 (size 128): comm "swapper/0", pid 1, jiffies 4294892465 (age 84.616s) hex dump (first 32 bytes): 40 00 56 01 08 00 ff ff 40 00 56 01 08 00 ff ff @.V.....@.V..... b8 52 77 7f 08 00 ff ff 00 3c 4c 00 08 00 ff ff .Rw......<L..... backtrace: [<00000000b1289fb1>] kmemleak_alloc+0x30/0x40 [<0000000056da48f0>] kmem_cache_alloc+0x3d4/0x588 [<00000000a84b3b0e>] _add_opp_dev+0x2c/0x88 [<0000000062a380cd>] _add_opp_table_indexed+0x124/0x268 [<000000008b4c8f1f>] dev_pm_opp_of_add_table+0x20/0x1d8 [<00000000e5316798>] dev_pm_opp_of_cpumask_add_table+0x48/0xf0 [<00000000db0a8ec2>] dt_cpufreq_probe+0x20c/0x448 [<0000000030a3a26c>] platform_probe+0x68/0xd8 [<00000000c618e78d>] really_probe+0xd0/0x3a0 [<00000000642e856f>] driver_probe_device+0x58/0xb8 [<00000000f10f5307>] device_driver_attach+0x74/0x80 [<0000000004f254b8>] __driver_attach+0x58/0xe0 [<0000000009d5d19e>] bus_for_each_dev+0x70/0xc8 [<0000000000d22e1c>] driver_attach+0x24/0x30 [<0000000001d4e952>] bus_add_driver+0x14c/0x1f0 [<0000000089928aaa>] driver_register+0x64/0x120 Cc: v5.10 <stable@vger.kernel.org> # v5.10 Fixes: dd461cd9183f ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> [ Viresh: Added the stable tag ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-27Merge tag 'ntb-5.11' of git://github.com/jonmason/ntbLinus Torvalds
Pull NTB fixes from Jon Mason: "Bug fix for IDT NTB and Intel NTB LTR management support" * tag 'ntb-5.11' of git://github.com/jonmason/ntb: ntb: intel: add Intel NTB LTR vendor support for gen4 NTB ntb: idt: fix error check in ntb_hw_idt.c
2020-12-27Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "Fix a number of autobuild failures due to missing Kconfig dependencies" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: qat - add CRYPTO_AES to Kconfig dependencies crypto: keembay - Add dependency on HAS_IOMEM crypto: keembay - CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 should depend on ARCH_KEEMBAY
2020-12-27vhost/vsock: add IOTLB API supportStefano Garzarella
This patch enables the IOTLB API support for vhost-vsock devices, allowing the userspace to emulate an IOMMU for the guest. These changes were made following vhost-net, in details this patch: - exposes VIRTIO_F_ACCESS_PLATFORM feature and inits the iotlb device if the feature is acked - implements VHOST_GET_BACKEND_FEATURES and VHOST_SET_BACKEND_FEATURES ioctls - calls vq_meta_prefetch() before vq processing to prefetch vq metadata address in IOTLB - provides .read_iter, .write_iter, and .poll callbacks for the chardev; they are used by the userspace to exchange IOTLB messages This patch was tested specifying "intel_iommu=strict" in the guest kernel command line. I used QEMU with a patch applied [1] to fix a simple issue (that patch was merged in QEMU v5.2.0): $ qemu -M q35,accel=kvm,kernel-irqchip=split \ -drive file=fedora.qcow2,format=qcow2,if=virtio \ -device intel-iommu,intremap=on,device-iotlb=on \ -device vhost-vsock-pci,guest-cid=3,iommu_platform=on,ats=on [1] https://lists.gnu.org/archive/html/qemu-devel/2020-10/msg09077.html Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20201223143638.123417-1-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2020-12-26mfd: ab8500-debugfs: Remove extraneous seq_putcLinus Torvalds
Commit c9a3c4e637ac ("mfd: ab8500-debugfs: Remove extraneous curly brace") removed a left-over curly brace that caused build failures, but Joe Perches points out that the subsequent 'seq_putc()' should also be removed, because the commit that caused all these problems already added the final '\n' to the seq_printf() above it. Reported-by: Joe Perches <joe@perches.com> Fixes: 886c8121659d ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc") Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-25Merge tag 'pci-v5.11-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Fix a tegra enumeration regression (Rob Herring) - Fix a designware-host check that warned on *success*, not failure (Alexander Lobakin) * tag 'pci-v5.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: dwc: Fix inverted condition of DMA mask setup warning PCI: tegra: Fix host link initialization
2020-12-25mfd: ab8500-debugfs: Remove extraneous curly braceNathan Chancellor
Clang errors: drivers/mfd/ab8500-debugfs.c:1526:2: error: non-void function does not return a value [-Werror,-Wreturn-type] } ^ drivers/mfd/ab8500-debugfs.c:1528:2: error: expected identifier or '(' return 0; ^ drivers/mfd/ab8500-debugfs.c:1529:1: error: extraneous closing brace ('}') } ^ 3 errors generated. The cleanup in ab8500_interrupts_show left a curly brace around, remove it to fix the error. Fixes: 886c8121659d ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-25PCI: dwc: Fix inverted condition of DMA mask setup warningAlexander Lobakin
Commit 660c486590aa ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation") added dma_mask_set() call to explicitly set 32-bit DMA mask for MSI message mapping, but for now it throws a warning on ret == 0, while dma_set_mask() returns 0 in case of success. Fix this by inverting the condition. [bhelgaas: join string to make it greppable] Fixes: 660c486590aa ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation") Link: https://lore.kernel.org/r/20201222150708.67983-1-alobakin@pm.me Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-25PCI: tegra: Fix host link initializationRob Herring
Commit b9ac0f9dc8ea ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code") broke enumeration of downstream devices on Tegra: In non-working case (next-20201211): 0001:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad2 (rev a1) 0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13) 0005:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad0 (rev a1) In working case (v5.10-rc7): 0001:00:00.0 PCI bridge: Molex Incorporated Device 1ad2 (rev a1) 0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13) 0005:00:00.0 PCI bridge: Molex Incorporated Device 1ad0 (rev a1) 0005:01:00.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab) 0005:02:02.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab) 0005:03:00.0 USB controller: PLX Technology, Inc. Device 3380 (rev ab) The problem seems to be dw_pcie_setup_rc() is now called twice before and after the link up handling. The fix is to move Tegra's link up handling to .start_link() function like other DWC drivers. Tegra is a bit more complicated than others as it re-inits the whole DWC controller to retry the link. With this, the initialization ordering is restored to match the prior sequence. Fixes: b9ac0f9dc8ea ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code") Link: https://lore.kernel.org/r/20201218143905.1614098-1-robh@kernel.org Reported-by: Mian Yousaf Kaukab <ykaukab@suse.de> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Vidya Sagar <vidyas@nvidia.com>
2020-12-25drm/amd/display: avoid uninitialized variable warningLinus Torvalds
clang (quite rightly) complains fairly loudly about the newly added mpc1_get_mpc_out_mux() function returning an uninitialized value if the 'opp_id' checks don't pass. This may not happen in practice, but the code really shouldn't return garbage if the sanity checks don't pass. So just initialize 'val' to zero to avoid the issue. Fixes: 110b055b2827 ("drm/amd/display: add getter routine to retrieve mpcc mux") Cc: Josip Pavic <Josip.Pavic@amd.com> Cc: Bindu Ramamurthy <bindu.r@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-24Merge tag 'irq-core-2020-12-23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This is the second attempt after the first one failed miserably and got zapped to unblock the rest of the interrupt related patches. A treewide cleanup of interrupt descriptor (ab)use with all sorts of racy accesses, inefficient and disfunctional code. The goal is to remove the export of irq_to_desc() to prevent these things from creeping up again" * tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits) genirq: Restrict export of irq_to_desc() xen/events: Implement irq distribution xen/events: Reduce irq_info:: Spurious_cnt storage size xen/events: Only force affinity mask for percpu interrupts xen/events: Use immediate affinity setting xen/events: Remove disfunct affinity spreading xen/events: Remove unused bind_evtchn_to_irq_lateeoi() net/mlx5: Use effective interrupt affinity net/mlx5: Replace irq_to_desc() abuse net/mlx4: Use effective interrupt affinity net/mlx4: Replace irq_to_desc() abuse PCI: mobiveil: Use irq_data_get_irq_chip_data() PCI: xilinx-nwl: Use irq_data_get_irq_chip_data() NTB/msi: Use irq_has_action() mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc pinctrl: nomadik: Use irq_has_action() drm/i915/pmu: Replace open coded kstat_irqs() copy drm/i915/lpe_audio: Remove pointless irq_to_desc() usage s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt() parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts() ...
2020-12-24Merge tag 'efi_updates_for_v5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Borislav Petkov: "These got delayed due to a last minute ia64 build issue which got fixed in the meantime. EFI updates collected by Ard Biesheuvel: - Don't move BSS section around pointlessly in the x86 decompressor - Refactor helper for discovering the EFI secure boot mode - Wire up EFI secure boot to IMA for arm64 - Some fixes for the capsule loader - Expose the RT_PROP table via the EFI test module - Relax DT and kernel placement restrictions on ARM with a few followup fixes: - fix the build breakage on IA64 caused by recent capsule loader changes - suppress a type mismatch build warning in the expansion of EFI_PHYS_ALIGN on ARM" * tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: arm: force use of unsigned type for EFI_PHYS_ALIGN efi: ia64: disable the capsule loader efi: stub: get rid of efi_get_max_fdt_addr() efi/efi_test: read RuntimeServicesSupported efi: arm: reduce minimum alignment of uncompressed kernel efi: capsule: clean scatter-gather entries from the D-cache efi: capsule: use atomic kmap for transient sglist mappings efi: x86/xen: switch to efi_get_secureboot_mode helper arm64/ima: add ima_arch support ima: generalize x86/EFI arch glue for other EFI architectures efi: generalize efi_get_secureboot efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes efi/x86: Only copy the compressed kernel image in efi_relocate_kernel() efi/libstub/x86: simplify efi_is_native()
2020-12-24Merge tag 'block-5.11-2020-12-23' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A few stragglers in here, but mostly just straight fixes. In particular: - Set of rnbd fixes for issues around changes for the merge window (Gioh, Jack, Md Haris Iqbal) - iocost tracepoint addition (Baolin) - Copyright/maintainers update (Christoph) - Remove old blk-mq fast path CPU warning (Daniel) - loop max_part fix (Josh) - Remote IPI threaded IRQ fix (Sebastian) - dasd stable fixes (Stefan) - bcache merge window fixup and style fixup (Yi, Zheng)" * tag 'block-5.11-2020-12-23' of git://git.kernel.dk/linux-block: md/bcache: convert comma to semicolon bcache:remove a superfluous check in register_bcache block: update some copyrights block: remove a pointless self-reference in block_dev.c MAINTAINERS: add fs/block_dev.c to the block section blk-mq: Don't complete on a remote CPU in force threaded mode s390/dasd: fix list corruption of lcu list s390/dasd: fix list corruption of pavgroup group list s390/dasd: prevent inconsistent LCU device data s390/dasd: fix hanging device offline processing blk-iocost: Add iocg idle state tracepoint nbd: Respect max_part for all partition scans block/rnbd-clt: Does not request pdu to rtrs-clt block/rnbd-clt: Dynamically allocate sglist for rnbd_iu block/rnbd: Set write-back cache and fua same to the target device block/rnbd: Fix typos block/rnbd-srv: Protect dev session sysfs removal block/rnbd-clt: Fix possible memleak block/rnbd-clt: Get rid of warning regarding size argument in strlcpy blk-mq: Remove 'running from the wrong CPU' warning
2020-12-24Merge tag 'libnvdimm-for-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "Twas the day before Christmas and the only thing stirring in libnvdimm / device-dax land is a pile of miscellaneous fixups and cleanups. The bulk of it has appeared in -next save the last two patches to device-dax that have passed my build and unit tests. - Fix a long standing block-window-namespace issue surfaced by the ndctl change to attempt to preserve the kernel device name over a 'reconfigure' - Fix a few error path memory leaks in nfit and device-dax - Silence a smatch warning in the ioctl path - Miscellaneous cleanups" * tag 'libnvdimm-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: Avoid an unnecessary check in alloc_dev_dax_range() device-dax: Fix range release device-dax: delete a redundancy check in dev_dax_validate_align() libnvdimm/label: Return -ENXIO for no slot in __blk_label_update device-dax/core: Fix memory leak when rmmod dax.ko device-dax/pmem: Convert comma to semicolon libnvdimm: Cleanup include of badblocks.h ACPI: NFIT: Fix input validation of bus-family libnvdimm/namespace: Fix reaping of invalidated block-window-namespace labels ACPI/nfit: avoid accessing uninitialized memory in acpi_nfit_ctl()
2020-12-24Merge tag 'drm-next-2020-12-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Xmas eve pull request present. Just some fixes that trickled in this past week: Mostly amdgpu fixes, with a dma-buf/mips build fix and some misc komeda fixes. dma-buf: - fix build on mips komeda: - fix commit tail operation order - NULL pointer fix - out of bounds access fix ttm: - remove an unused function amdgpu: - Vangogh SMU fixes - Arcturus gfx9 fixes - Misc display fixes - Sienna Cichlid SMU update - Fix S3 display memory leak - Fix regression caused by DP sub-connector support amdkfd: - Properly require pcie atomics for gfx10" * tag 'drm-next-2020-12-24' of git://anongit.freedesktop.org/drm/drm: (31 commits) drm/amd/display: Fix memory leaks in S3 resume drm/amdgpu: Fix a copy-pasta comment drm/amdgpu: only set DP subconnector type on DP and eDP connectors drm/amd/pm: bump Sienna Cichlid smu_driver_if version to match latest pmfw drm/amd/display: add getter routine to retrieve mpcc mux drm/amd/display: always program DPPDTO unless not safe to lower drm/amd/display: [FW Promotion] Release 0.0.47 drm/amd/display: updated wm table for Renoir drm/amd/display: Acquire DSC during split stream for ODM only if top_pipe drm/amd/display: Multi-display underflow observed drm/amd/display: Remove unnecessary NULL check drm/amd/display: Update RN/VGH active display count workaround drm/amd/display: change SMU repsonse timeout to 2s. drm/amd/display: gradually ramp ABM intensity drm/amd/display: To modify the condition in indicating branch device drm/amd/display: Modify the hdcp device count check condition drm/amd/display: Interfaces for hubp blank and soft reset drm/amd/display: handler not correctly checked at remove_irq_handler drm/amdgpu: check gfx pipe availability before toggling its interrupts drm/amdgpu: remove unnecessary asic type check ...
2020-12-24Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: - vdpa sim refactoring - virtio mem: Big Block Mode support - misc cleanus, fixes * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (61 commits) vdpa: Use simpler version of ida allocation vdpa: Add missing comment for virtqueue count uapi: virtio_ids: add missing device type IDs from OASIS spec uapi: virtio_ids.h: consistent indentions vhost scsi: fix error return code in vhost_scsi_set_endpoint() virtio_ring: Fix two use after free bugs virtio_net: Fix error code in probe() virtio_ring: Cut and paste bugs in vring_create_virtqueue_packed() tools/virtio: add barrier for aarch64 tools/virtio: add krealloc_array tools/virtio: include asm/bug.h vdpa/mlx5: Use write memory barrier after updating CQ index vdpa: split vdpasim to core and net modules vdpa_sim: split vdpasim_virtqueue's iov field in out_iov and in_iov vdpa_sim: make vdpasim->buffer size configurable vdpa_sim: use kvmalloc to allocate vdpasim->buffer vdpa_sim: set vringh notify callback vdpa_sim: add set_config callback in vdpasim_dev_attr vdpa_sim: add get_config callback in vdpasim_dev_attr vdpa_sim: make 'config' generic and usable for any device type ...
2020-12-24Merge branch 'for-5.11/dax' into for-5.11/libnvdimmDan Williams
Pull in miscellaneous device-dax fixups and cleanups for v5.11.
2020-12-24device-dax: Avoid an unnecessary check in alloc_dev_dax_range()Zhen Lei
Swap the calling sequence of krealloc() and __request_region(), call the latter first. In this way, the value of dev_dax->nr_range does not need to be considered when __request_region() failed. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20201219081840.1149-2-thunder.leizhen@huawei.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-12-24device-dax: Fix range releaseDan Williams
There are multiple locations that open-code the release of the last range in a device-dax instance. Consolidate this into a new dev_dax_trim_range() helper. This also addresses a kmemleak report: # cat /sys/kernel/debug/kmemleak [..] unreferenced object 0xffff976bd46f6240 (size 64): comm "ndctl", pid 23556, jiffies 4299514316 (age 5406.733s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 20 c3 37 00 00 00 .......... .7... ff ff ff 7f 38 00 00 00 00 00 00 00 00 00 00 00 ....8........... backtrace: [<00000000064003cf>] __kmalloc_track_caller+0x136/0x379 [<00000000d85e3c52>] krealloc+0x67/0x92 [<00000000d7d3ba8a>] __alloc_dev_dax_range+0x73/0x25c [<0000000027d58626>] devm_create_dev_dax+0x27d/0x416 [<00000000434abd43>] __dax_pmem_probe+0x1c9/0x1000 [dax_pmem_core] [<0000000083726c1c>] dax_pmem_probe+0x10/0x1f [dax_pmem] [<00000000b5f2319c>] nvdimm_bus_probe+0x9d/0x340 [libnvdimm] [<00000000c055e544>] really_probe+0x230/0x48d [<000000006cabd38e>] driver_probe_device+0x122/0x13b [<0000000029c7b95a>] device_driver_attach+0x5b/0x60 [<0000000053e5659b>] bind_store+0xb7/0xc3 [<00000000d3bdaadc>] drv_attr_store+0x27/0x31 [<00000000949069c5>] sysfs_kf_write+0x4a/0x57 [<000000004a8b5adf>] kernfs_fop_write+0x150/0x1e5 [<00000000bded60f0>] __vfs_write+0x1b/0x34 [<00000000b92900f0>] vfs_write+0xd8/0x1d1 Reported-by: Jane Chu <jane.chu@oracle.com> Cc: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/160834570161.1791850.14911670304441510419.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-12-24Merge tag 'amd-drm-fixes-5.11-2020-12-23' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-next amd-drm-fixes-5.11-2020-12-23: amdgpu: - Vangogh SMU fixes - Arcturus gfx9 fixes - Misc display fixes - Sienna Cichlid SMU update - Fix S3 display memory leak - Fix regression caused by DP sub-connector support amdkfd: - Properly require pcie atomics for gfx10 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201223204752.4019-1-alexander.deucher@amd.com
generated by cgit (git 2.34.1) at 2025-09-12 23:28:52 +0000