summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-05-28bus: bt1-apb: Build the driver into the kernelSerge Semin
Seeing trigger_all_cpu_backtrace() isn't exported from the kernel and since calling it is a very important part of driver, which may provide a better description of a possible cause of the error, let's disable the ability to build the driver as a loadable kernel module. Link: https://lore.kernel.org/r/20200528193113.17372-1-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Olof Johansson <olof@lixom.net> Cc: soc@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28sfc: avoid an unused-variable warningArnd Bergmann
'nic_data' is no longer used outside of the #ifdef block in efx_ef10_set_mac_address: drivers/net/ethernet/sfc/ef10.c:3231:28: error: unused variable 'nic_data' [-Werror,-Wunused-variable] struct efx_ef10_nic_data *nic_data = efx->nic_data; Move the variable into a local scope. Fixes: dfcabb078847 ("sfc: move vport_id to struct efx_nic") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just a few random driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - add a second working PNP_ID for Lenovo T470s Input: applespi - replace zero-length array with flexible-array Input: axp20x-pek - always register interrupt handlers Input: lm8333 - update contact email Input: synaptics-rmi4 - fix error return code in rmi_driver_probe() Input: synaptics-rmi4 - really fix attn_data use-after-free Input: i8042 - add ThinkPad S230u to i8042 reset list Revert "Input: i8042 - add ThinkPad S230u to i8042 nomux list" Input: dlink-dir685-touchkeys - fix a typo in driver name Input: xpad - add custom init packet for Xbox One S controllers Input: evdev - call input_flush_device() on release(), not flush() Input: i8042 - add ThinkPad S230u to i8042 nomux list Input: usbtouchscreen - add support for BonXeon TP Input: cros_ec_keyb - use cros_ec_cmd_xfer_status helper Input: mms114 - fix handling of mms345l Input: elants_i2c - support palm detection
2020-05-28Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2020-05-27 This series contains updates to the ice driver only. Jesse fixes a number of issues, starting with fixing the remaining signed versus unsigned comparison issues. Cleaned up an unused code define. Fixed the implementation of the manage MAC write command, to simplify it by using a simple array to represent the MAC address when writing it. Paul fixes the setting of the VF default LAN address, by removing a check that assumed that the address had been deleted and zeroed. Surabhi prevents a memory leak on filter management initialization failures and during queue initialization and buffer allocation failures. Brett adds additional receive error counters that are reported by ethtool. Fixed the enabling and disabling of VLAN stripping when the PVID has been set. Evan fixes a race condition between the firmware and software, which can occur between the admin queue setup and the first command sent. Marta fixes the driver when XDP transmit rings are destroyed, also make sure the XDP transmit queues are also destroyed. Update the statistics when XDP transmit programs are loaded and packets are sent. Changed the number of XDP transmit queues to match the number of receive queues, instead of matching the number of transmit queues. Bruce avoids undefined behavior by not writing the 8-bit element init_q_state with the associated internal-to-hardware field which is 122-bits. Anirudh (Ani) refactors the receive checksum checks. Krzysztof notifies the user if the fill queue is not long enough to prepare all buffers before packet processing starts and allocates the buffers during the NAPI poll. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28ipv4: add ip_sock_set_freebindChristoph Hellwig
Add a helper to directly set the IP_FREEBIND sockopt from kernel space without going through a fake uaccess. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28ipv4: add ip_sock_set_tosChristoph Hellwig
Add a helper to directly set the IP_TOS sockopt from kernel space without going through a fake uaccess. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28tcp: add tcp_sock_set_syncntChristoph Hellwig
Add a helper to directly set the TCP_SYNCNT sockopt from kernel space without going through a fake uaccess. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28tcp: add tcp_sock_set_quickackChristoph Hellwig
Add a helper to directly set the TCP_QUICKACK sockopt from kernel space without going through a fake uaccess. Cleanup the callers to avoid pointless wrappers now that this is a simple function call. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28tcp: add tcp_sock_set_nodelayChristoph Hellwig
Add a helper to directly set the TCP_NODELAY sockopt from kernel space without going through a fake uaccess. Cleanup the callers to avoid pointless wrappers now that this is a simple function call. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28tcp: add tcp_sock_set_corkChristoph Hellwig
Add a helper to directly set the TCP_CORK sockopt from kernel space without going through a fake uaccess. Cleanup the callers to avoid pointless wrappers now that this is a simple function call. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: add sock_set_priorityChristoph Hellwig
Add a helper to directly set the SO_PRIORITY sockopt from kernel space without going through a fake uaccess. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: add sock_no_lingerChristoph Hellwig
Add a helper to directly set the SO_LINGER sockopt from kernel space with onoff set to true and a linger time of 0 without going through a fake uaccess. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: add sock_set_reuseaddrChristoph Hellwig
Add a helper to directly set the SO_REUSEADDR sockopt from kernel space without going through a fake uaccess. For this the iscsi target now has to formally depend on inet to avoid a mostly theoretical compile failure. For actual operation it already did depend on having ipv4 or ipv6 support. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28bonding: Fix reference count leak in bond_sysfs_slave_add.Qiushi Wu
kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Previous commit "b8eb718348b8" fixed a similar problem. Fixes: 07699f9a7c8d ("bonding: add sysfs /slave dir for bond slave devices.") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28Merge tag 'mlx5-updates-2020-05-26' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2020-05-26 Updates highlights: 1) From Vu Pham (8): Support VM traffics failover with bonded VF representors and e-switch egress/ingress ACLs This series introduce the support for Virtual Machine running I/O traffic over direct/fast VF path and failing over to slower paravirtualized path using the following features: __________________________________ | VM _________________ | | |FAILOVER device | | | |________________| | | | | | ____|_____ | | | | | | ______ |___ ____|_______ | | | VF PT | |VIRTIO-NET | | | | device | | device | | | |_________| |___________| | |___________|______________|________| | | | HYPERVISOR | | ____|______ | | macvtap | | |virtio BE | | |___________| | | | ____|_____ | |host VF | | |_________| | | _____|______ _____|_____ | PT VF | | host VF | |representor| |representor| |___________| |___________| \ / \ / \ / \ / _________________ \_______/ | | _______|________ | V-SWITCH | |VF representors |________________| (OVS) | | bond | |________________| |________________| | ________|________ | Uplink | | representor | |_________________| Summary: -------- Problem statement: ------------------ Currently in above topology, when netfailover device is configured using VFs and eswitch VF representors, and when traffic fails over to stand-by VF which is exposed using macvtap device to guest VM, eswitch fails to switch the traffic to the stand-by VF representor. This occurs because there is no knowledge at eswitch level of the stand-by representor device. Solution: --------- Using standard bonding driver, a bond netdevice is created over VF representor device which is used for offloading tc rules. Two VF representors are bonded together, one for the passthrough VF device and another one for the stand-by VF device. With this solution, mlx5 driver listens to the failover events occuring at the bond device level to failover traffic to either of the active VF representor of the bond. a. VM with netfailover device of VF pass-thru (PT) device and virtio-net paravirtualized device with same MAC-address to handle failover traffics at VM level. b. Host bond is active-standby mode, with the lower devices being the VM VF PT representor, and the representor of the 2nd VF to handle failover traffics at Hypervisor/V-Switch OVS level. - During the steady state (fast datapath): set the bond active device to be the VM PT VF representor. - During failover: apply bond failover to the second VF representor device which connects to the VM non-accelerated path. c. E-Switch ingress/egress ACL tables to support failover traffics at E-Switch level I. E-Switch egress ACL with forward-to-vport rule: - By default, eswitch vport egress acl forward packets to its counterpart NIC vport. - During port failover, the egress acl forward-to-vport rule will be added to e-switch vport of passive/in-active slave VF representor to forward packets to other e-switch vport ie. the active slave representor's e-switch vport to handle egress "failover" traffics. - Using lower change netdev event to detect a representor is a lower dev (slave) of bond and becomes active, adding egress acl forward-to-vport rule of all other slave netdevs to forward to this representor's vport. - Using upper change netdev event to detect a representor unslaving from bond device to delete its vport's egress acl forward-to-vport rule. II. E-Switch ingress ACL metadata reg_c for match - Bonded representors' vorts sharing tc block have the same root ingress acl table and a unique metadata for match. - Traffics from both representors's vports will be tagged with same unique metadata reg_c. - Using upper change netdev event to detect a representor enslaving/unslaving from bond device to setup shared root ingress acl and unique metadata. 2) From Alex Vesker (2): Slpit RX and TX lock for parallel rule insertion in software steering 3) Eli Britstein (2): Optimize performance for IPv4/IPv6 ethertype use the HW ip_version register rather than parsing eth frames for ethertype. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: dsa: sja1105: offload the Credit-Based Shaper qdiscVladimir Oltean
SJA1105, being AVB/TSN switches, provide hardware assist for the Credit-Based Shaper as described in the IEEE 8021Q-2018 document. First generation has 10 shapers, freely assignable to any of the 4 external ports and 8 traffic classes, and second generation has 16 shapers. The Credit-Based Shaper tables are accessed through the dynamic reconfiguration interface, so we have to restore them manually after a switch reset. The tables are backed up by the static config only on P/Q/R/S, and we don't want to add custom code only for that family, since the procedure that is in place now works for both. Tested with the following commands: data_rate_kbps=67000 port_transmit_rate_kbps=1000000 idleslope=$data_rate_kbps sendslope=$(($idleslope - $port_transmit_rate_kbps)) locredit=$((-0x80000000)) hicredit=$((0x7fffffff)) tc qdisc add dev swp2 root handle 1: mqprio hw 0 num_tc 8 \ map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 tc qdisc replace dev swp2 parent 1:1 cbs \ idleslope $idleslope \ sendslope $sendslope \ hicredit $hicredit \ locredit $locredit \ offload 1 Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28Merge branch 'for-next/scs' into for-next/coreWill Deacon
Support for Clang's Shadow Call Stack in the kernel (Sami Tolvanen and Will Deacon) * for-next/scs: arm64: entry-ftrace.S: Update comment to indicate that x18 is live scs: Move DEFINE_SCS macro into core code scs: Remove references to asm/scs.h from core code scs: Move scs_overflow_check() out of architecture code arm64: scs: Use 'scs_sp' register alias for x18 scs: Move accounting into alloc/free functions arm64: scs: Store absolute SCS stack pointer value in thread_info efi/libstub: Disable Shadow Call Stack arm64: scs: Add shadow stacks for SDEI arm64: Implement Shadow Call Stack arm64: Disable SCS for hypervisor code arm64: vdso: Disable Shadow Call Stack arm64: efi: Restore register x18 if it was corrupted arm64: Preserve register x18 when CPU is suspended arm64: Reserve register x18 from general allocation with SCS scs: Disable when function graph tracing is enabled scs: Add support for stack usage debugging scs: Add page accounting for shadow call stack allocations scs: Add support for Clang's Shadow Call Stack (SCS)
2020-05-28Merge branches 'for-next/acpi', 'for-next/bpf', 'for-next/cpufeature', ↵Will Deacon
'for-next/docs', 'for-next/kconfig', 'for-next/misc', 'for-next/perf', 'for-next/ptr-auth', 'for-next/sdei', 'for-next/smccc' and 'for-next/vdso' into for-next/core ACPI and IORT updates (Lorenzo Pieralisi) * for-next/acpi: ACPI/IORT: Remove the unused __get_pci_rid() ACPI/IORT: Fix PMCG node single ID mapping handling ACPI: IORT: Add comments for not calling acpi_put_table() ACPI: GTDT: Put GTDT table after parsing ACPI: IORT: Add extra message "applying workaround" for off-by-1 issue ACPI/IORT: work around num_ids ambiguity Revert "ACPI/IORT: Fix 'Number of IDs' handling in iort_id_map()" ACPI/IORT: take _DMA methods into account for named components BPF JIT optimisations for immediate value generation (Luke Nelson) * for-next/bpf: bpf, arm64: Optimize ADD,SUB,JMP BPF_K using arm64 add/sub immediates bpf, arm64: Optimize AND,OR,XOR,JSET BPF_K using arm64 logical immediates arm64: insn: Fix two bugs in encoding 32-bit logical immediates Addition of new CPU ID register fields and removal of some benign sanity checks (Anshuman Khandual and others) * for-next/cpufeature: (27 commits) KVM: arm64: Check advertised Stage-2 page size capability arm64/cpufeature: Add get_arm64_ftr_reg_nowarn() arm64/cpuinfo: Add ID_MMFR4_EL1 into the cpuinfo_arm64 context arm64/cpufeature: Add remaining feature bits in ID_AA64PFR1 register arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register arm64/cpufeature: Add remaining feature bits in ID_AA64ISAR0 register arm64/cpufeature: Add remaining feature bits in ID_MMFR4 register arm64/cpufeature: Add remaining feature bits in ID_PFR0 register arm64/cpufeature: Introduce ID_MMFR5 CPU register arm64/cpufeature: Introduce ID_DFR1 CPU register arm64/cpufeature: Introduce ID_PFR2 CPU register arm64/cpufeature: Make doublelock a signed feature in ID_AA64DFR0 arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register arm64/cpufeature: Add explicit ftr_id_isar0[] for ID_ISAR0 register arm64/cpufeature: Drop open encodings while extracting parange arm64/cpufeature: Validate hypervisor capabilities during CPU hotplug arm64: cpufeature: Group indexed system register definitions by name arm64: cpufeature: Extend comment to describe absence of field info arm64: drop duplicate definitions of ID_AA64MMFR0_TGRAN constants arm64: cpufeature: Add an overview comment for the cpufeature framework ... Minor documentation tweaks for silicon errata and booting requirements (Rob Herring and Will Deacon) * for-next/docs: arm64: silicon-errata.rst: Sort the Cortex-A55 entries arm64: docs: Mandate that the I-cache doesn't hold stale kernel text Minor Kconfig cleanups (Geert Uytterhoeven) * for-next/kconfig: arm64: cpufeature: Add "or" to mitigations for multiple errata arm64: Sort vendor-specific errata Miscellaneous updates (Ard Biesheuvel and others) * for-next/misc: arm64: mm: Add asid_gen_match() helper arm64: stacktrace: Factor out some common code into on_stack() arm64: Call debug_traps_init() from trap_init() to help early kgdb arm64: cacheflush: Fix KGDB trap detection arm64/cpuinfo: Move device_initcall() near cpuinfo_regs_init() arm64: kexec_file: print appropriate variable arm: mm: use __pfn_to_section() to get mem_section arm64: Reorder the macro arguments in the copy routines efi/libstub/arm64: align PE/COFF sections to segment alignment KVM: arm64: Drop PTE_S2_MEMATTR_MASK arm64/kernel: Fix range on invalidating dcache for boot page tables arm64: set TEXT_OFFSET to 0x0 in preparation for removing it entirely arm64: lib: Consistently enable crc32 extension arm64/mm: Use phys_to_page() to access pgtable memory arm64: smp: Make cpus_stuck_in_kernel static arm64: entry: remove unneeded semicolon in el1_sync_handler() arm64/kernel: vmlinux.lds: drop redundant discard/keep macros arm64: drop GZFLAGS definition and export arm64: kexec_file: Avoid temp buffer for RNG seed arm64: rename stext to primary_entry Perf PMU driver updates (Tang Bin and others) * for-next/perf: pmu/smmuv3: Clear IRQ affinity hint on device removal drivers/perf: hisi: Permit modular builds of HiSilicon uncore drivers drivers/perf: hisi: Fix typo in events attribute array drivers/perf: arm_spe_pmu: Avoid duplicate printouts drivers/perf: arm_dsu_pmu: Avoid duplicate printouts Pointer authentication updates and support for vmcoreinfo (Amit Daniel Kachhap and Mark Rutland) * for-next/ptr-auth: Documentation/vmcoreinfo: Add documentation for 'KERNELPACMASK' arm64/crash_core: Export KERNELPACMASK in vmcoreinfo arm64: simplify ptrauth initialization arm64: remove ptrauth_keys_install_kernel sync arg SDEI cleanup and non-critical fixes (James Morse and others) * for-next/sdei: firmware: arm_sdei: Document the motivation behind these set_fs() calls firmware: arm_sdei: remove unused interfaces firmware: arm_sdei: Put the SDEI table after using it firmware: arm_sdei: Drop check for /firmware/ node and always register driver SMCCC updates and refactoring (Sudeep Holla) * for-next/smccc: firmware: smccc: Fix missing prototype warning for arm_smccc_version_init firmware: smccc: Add function to fetch SMCCC version firmware: smccc: Refactor SMCCC specific bits into separate file firmware: smccc: Drop smccc_version enum and use ARM_SMCCC_VERSION_1_x instead firmware: smccc: Add the definition for SMCCCv1.2 version/error codes firmware: smccc: Update link to latest SMCCC specification firmware: smccc: Add HAVE_ARM_SMCCC_DISCOVERY to identify SMCCC v1.1 and above vDSO cleanup and non-critical fixes (Mark Rutland and Vincenzo Frascino) * for-next/vdso: arm64: vdso: Add --eh-frame-hdr to ldflags arm64: vdso: use consistent 'map' nomenclature arm64: vdso: use consistent 'abi' nomenclature arm64: vdso: simplify arch_vdso_type ifdeffery arm64: vdso: remove aarch32_vdso_pages[] arm64: vdso: Add '-Bsymbolic' to ldflags
2020-05-28mt76: mt7915: remove set but not used variable 'msta'YueHaibing
Cc: linux-wireless@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, netdev@vger.kernel.org, kernel-janitors@vger.kernel.org Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/mediatek/mt76/mt7915/mcu.c: In function 'mt7915_mcu_sta_txbf_type': drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:1805:21: warning: variable 'msta' set but not used [-Wunused-but-set-variable] It is never used, so can be removed. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7615: Use kmemdup in mt7615_queue_key_update()YueHaibing
Use kmemdup rather than duplicating its implementation Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: only iterate over initialized rx queuesFelix Fietkau
Fixes the following reported crash: [ 2.361127] BUG: spinlock bad magic on CPU#0, modprobe/456 [ 2.361583] lock: 0xffffa1287525b3b8, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 [ 2.362250] CPU: 0 PID: 456 Comm: modprobe Not tainted 4.14.177 #5 [ 2.362751] Hardware name: HP Meep/Meep, BIOS Google_Meep.11297.75.0 06/17/2019 [ 2.363343] Call Trace: [ 2.363552] dump_stack+0x97/0xdb [ 2.363826] ? spin_bug+0xa6/0xb3 [ 2.364096] do_raw_spin_lock+0x6a/0x9a [ 2.364417] mt76_dma_rx_fill+0x44/0x1de [mt76] [ 2.364787] ? mt76_dma_kick_queue+0x18/0x18 [mt76] [ 2.365184] mt76_dma_init+0x53/0x85 [mt76] [ 2.365532] mt7615_dma_init+0x3d7/0x546 [mt7615e] [ 2.365928] mt7615_register_device+0xe6/0x1a0 [mt7615e] [ 2.366364] mt7615_mmio_probe+0x14b/0x171 [mt7615e] [ 2.366771] mt7615_pci_probe+0x118/0x13b [mt7615e] [ 2.367169] pci_device_probe+0xaf/0x13d [ 2.367491] driver_probe_device+0x284/0x2ca [ 2.367840] __driver_attach+0x7a/0x9e [ 2.368146] ? driver_attach+0x1f/0x1f [ 2.368451] bus_for_each_dev+0xa0/0xdb [ 2.368765] bus_add_driver+0x132/0x204 [ 2.369078] driver_register+0x8e/0xcd [ 2.369384] do_one_initcall+0x160/0x257 [ 2.369706] ? 0xffffffffc0240000 [ 2.369980] do_init_module+0x60/0x1bb [ 2.370286] load_module+0x18c2/0x1a2b [ 2.370596] ? kernel_read_file+0x141/0x1b9 [ 2.370937] ? kernel_read_file_from_fd+0x46/0x71 [ 2.371320] SyS_finit_module+0xcc/0xf0 [ 2.371636] do_syscall_64+0x6b/0xf7 [ 2.371930] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 2.372344] RIP: 0033:0x7da218ae4199 [ 2.372637] RSP: 002b:00007fffd0608398 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 2.373252] RAX: ffffffffffffffda RBX: 00005a705449df90 RCX: 00007da218ae4199 [ 2.373833] RDX: 0000000000000000 RSI: 00005a7052e73bd8 RDI: 0000000000000006 [ 2.374411] RBP: 00007fffd06083e0 R08: 0000000000000000 R09: 00005a705449d540 [ 2.374989] R10: 0000000000000006 R11: 0000000000000246 R12: 0000000000000000 [ 2.375569] R13: 00005a705449def0 R14: 00005a7052e73bd8 R15: 0000000000000000 Reported-by: Sean Wang <sean.wang@mediatek.com> Fixes: d3377b78cec6 ("mt76: add HE phy modes and hardware queue") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7615: add support for MT7611NDENG Qingfang
MT7611N is basically the same as MT7615N, except it only supports 5GHz It is used by some TP-Link and Mercury wireless routers Signed-off-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: fix wcid allocation issuesFelix Fietkau
mt76 core uses ffs() to find the next free bit. This works well for 32 bit architectures where BITS_PER_LONG is 32. ffs only checks 32 bit values, so allocation fails on 64 bit architectures. Additionally, the wcid mask array was too small in cases where the array was not a multiple of BITS_PER_LONG. Fix this by making the wcid mask array u32 instead and use DIV_ROUND_UP for the size, just in case we ever bump it to a value that's not a multiple of 32. Reported-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7915: fix possible NULL pointer dereference in mt7915_register_ext_phyLorenzo Bianconi
Fix a NULL pointer dereference in mt7915_register_ext_phy since phy data structure is allocated by mt76_alloc_phy routine Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7615: fix hw_scan with ssid_type for specified SSID onlySean Wang
Fix hw_scan with ssid_type for specified SSID only The definition for ssid_type in current firmware is that ssid_type BIT(2) set actually for specified SSID + wildcard SSID. ssid_type BIT(2) and ssid_type_ext BIT(0) both set actually for specified SSID only; Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7915: fix a handful of spelling mistakesColin Ian King
There are some spelling mistakes in some literal strings. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7615: switch to per-vif power_save supportLorenzo Bianconi
switch to per-vif ps support since mt7615 offload firmware can handle it properly. This patch allows enabling/disabling power-save support on p2p interface Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7915: fix some sparse warningsRyder Lee
drivers/net/wireless/mediatek/mt76/mt7915/main.c:694:1: sparse: sparse: context imbalance in 'mt7915_sta_rc_update' - wrong count at exit drivers/net/wireless/mediatek/mt76/mt7915/mac.c:303:43: sparse: sparse: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:304:43: sparse: sparse: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:305:43: sparse: sparse: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:319:35: sparse: sparse: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:327:35: sparse: sparse: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:345:41: sparse: sparse: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:355:33: sparse: sparse: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:451:21: sparse: sparse: invalid assignment: |= drivers/net/wireless/mediatek/mt76/mt7915/mac.c:451:21: sparse: left side has type unsigned int drivers/net/wireless/mediatek/mt76/mt7915/mac.c:451:21: sparse: right side has type restricted __le32 Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: fix per-driver wcid range checks after wcid array size bumpFelix Fietkau
All drivers before MT7915 have a limit of 128 WCID entries. Stop relying on ARRAY_SIZE(dev->mt76.wcid), since it no longer reflects that limit. Fixes: 49e649c3e0a6 ("mt76: adjust wcid size to support new 802.11ax generation") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7915: fix decoded radiotap HE flagsRyder Lee
Move assignment of .data1 and .data2 to a single place and fix overwriting of values from the template Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7615: fix NULL pointer deref in mt7615_register_ext_phyLorenzo Bianconi
Fix following NULL pointer dereference in mt7615_register_ext_phy routine [ 27.648860] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 [ 27.657697] Mem abort info: [ 27.660495] ESR = 0x96000046 [ 27.663549] EC = 0x25: DABT (current EL), IL = 32 bits [ 27.668857] SET = 0, FnV = 0 [ 27.671910] EA = 0, S1PTW = 0 [ 27.675040] Data abort info: [ 27.677918] ISV = 0, ISS = 0x00000046 [ 27.681751] CM = 0, WnR = 1 [ 27.684717] user pgtable: 4k pages, 39-bit VAs, pgdp=000000007d8cc000 [ 27.691156] [0000000000000060] pgd=000000007d281003, pud=000000007d281003, pmd=0000000000000000 [ 27.699857] Internal error: Oops: 96000046 [#1] SMP [ 27.774939] CPU: 1 PID: 701 Comm: ash Not tainted 5.4.41 #0 [ 27.780500] Hardware name: Bananapi BPI-R64 (DT) [ 27.785108] pstate: 60000005 (nZCv daif -PAN -UAO) [ 27.789897] pc : mt7615_register_ext_phy+0x60/0x2c8 [mt7615_common] [ 27.796156] lr : mt7615_init_debugfs+0x99c/0x18e0 [mt7615_common] [ 27.802237] sp : ffffffc0115dbcb0 [ 27.805541] x29: ffffffc0115dbcb0 x28: ffffff803e309600 [ 27.810843] x27: 0000000000000000 x26: 0000000000000000 [ 27.816144] x25: ffffff803d936928 x24: ffffff803d936950 [ 27.821447] x23: 0000000000000000 x22: 0000000fffffffe0 [ 27.826749] x21: 0000000000000002 x20: ffffff8001e82620 [ 27.832050] x19: 0000000000000000 x18: 0000000000000000 [ 27.837352] x17: 0000000000000000 x16: 0000000000000000 [ 27.842653] x15: 0000000000000000 x14: 0000000000000000 [ 27.847955] x13: 0000000000000000 x12: 0000000000000000 [ 27.853256] x11: 0000000000000000 x10: 0000000000000040 [ 27.858558] x9 : ffffffc0112b3eb0 x8 : ffffffc0112b3ea8 [ 27.863859] x7 : ffffff803e400048 x6 : 0000000000000000 [ 27.869161] x5 : ffffff803e400000 x4 : 0000000000000000 [ 27.874462] x3 : 0000000000000001 x2 : 0000000000007615 [ 27.879764] x1 : 0000000000000068 x0 : ffffffc0088ccc58 [ 27.885066] Call trace: [ 27.887505] mt7615_register_ext_phy+0x60/0x2c8 [mt7615_common] [ 27.893416] mt7615_init_debugfs+0x99c/0x18e0 [mt7615_common] [ 27.899156] simple_attr_write+0xf0/0x178 [ 27.903158] debugfs_attr_write+0x4c/0x70 [ 27.907159] full_proxy_write+0x60/0x90 [ 27.910987] __vfs_write+0x18/0x40 [ 27.914379] vfs_write+0xb0/0x1b8 [ 27.917685] ksys_write+0x4c/0xc8 [ 27.920989] __arm64_sys_write+0x18/0x20 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7915: fix sparse warnings: incorrect type initializerRyder Lee
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:2317:31: sparse: sparse: incorrect type in initializer (different base types) Fixes: 5517f78b0063 ("mt76: mt7915: enable firmware module debug support") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7915: fix some sparse warningsRyder Lee
This fixes the following sparse warning: drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:253:16: sparse: sparse: mixing different enum types: drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:253:16: sparse: unsigned int enum mt7915_txq_id drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:253:16: sparse: unsigned int enum mt76_txq_id drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:758:63: sparse: sparse: incorrect type in argument 2 (different address spaces) drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:758:63: sparse: expected unsigned char const [usertype] *ies drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:758:63: sparse: got unsigned char const [noderef] <asn:4> * drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:1390:23: sparse: sparse: incorrect type in argument 1 (different base types) drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:1390:23: sparse: expected unsigned int w drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:1390:23: sparse: got restricted __le32 [usertype] supp_ht_mcs drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:1390:23: sparse: sparse: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:1429:60: sparse: sparse: bad assignment (>>=) to restricted __le16 drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:1773:16: sparse: sparse: restricted __le32 degrades to integer Fixes: 6094f86fb371 ("mt76: mt7915: add HE bss_conf support for interfaces") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7915: add spatial reuse supportRyder Lee
Enable or disable OBSS PD when the bss config changes or we assoc to an AP that broadcasts the IE. With this patch, we can get ~20% gain in OBSS OTA environment. Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt76x02: remove check in mt76x02_mcu_msg_sendLorenzo Bianconi
mt76x02_mcu_msg_send is run just by mmio code so get rid of mt76_is_mmio() check Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7615: introduce remain_on_channel supportLorenzo Bianconi
Introduce remain_on_channel support to mt7615 driver if the device is running offload firmware Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28hwmon: Add Baikal-T1 PVT sensor driverSerge Semin
Baikal-T1 SoC provides an embedded process, voltage and temperature sensor to monitor an internal SoC environment (chip temperature, supply voltage and process monitor) and on time detect critical situations, which may cause the system instability and even damages. The IP-block is based on the Analog Bits PVT sensor, but is equipped with a dedicated control wrapper, which provides a MMIO registers-based access to the sensor core functionality (APB3-bus based) and exposes an additional functions like thresholds/data ready interrupts, its status and masks, measurements timeout. All of these is used to create a hwmon driver being added to the kernel by this commit. The driver implements support for the hardware monitoring capabilities of Baikal-T1 process, voltage and temperature sensors. PVT IP-core consists of one temperature and four voltage sensors, each of which is implemented as a dedicated hwmon channel config. The driver can optionally provide the hwmon alarms for each sensor the PVT controller supports. The alarms functionality is made compile-time configurable due to the hardware interface implementation peculiarity, which is connected with an ability to convert data from only one sensor at a time. Additional limitation is that the controller performs the thresholds checking synchronously with the data conversion procedure. Due to these limitations in order to have the hwmon alarms automatically detected the driver code must switch from one sensor to another, read converted data and manually check the threshold status bits. Depending on the measurements timeout settings this design may cause additional burden on the system performance. By default if the alarms kernel config is disabled the data conversion is performed by the driver on demand when read operation is requested via corresponding _input-file. Co-developed-by: Maxim Kaurkin <maxim.kaurkin@baikalelectronics.ru> Signed-off-by: Maxim Kaurkin <maxim.kaurkin@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-28hwmon: Add notification supportGuenter Roeck
For hwmon drivers using the hwmon_device_register_with_info() API, it is desirable to have a generic notification mechanism available. This mechanism can be used to notify userspace as well as the thermal subsystem if the driver experiences any events, such as warning or critical alarms. Implement hwmon_notify_event() to provide this mechanism. The function generates a sysfs event and a udev event. If the device is registered with the thermal subsystem and the event is associated with a temperature sensor, also notify the thermal subsystem that a thermal event occurred. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Maxim Kaurkin <Maxim.Kaurkin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-28bus: bt1-axi: Use sysfs_streq instead of strncmpSerge Semin
There is a ready-to-use method to compare a retrieved from a sysfs node string with another string. It treats both NUL and newline-then-NUL as equivalent string terminations. So use it instead of manually truncating the line length in the strncmp() method. Link: https://lore.kernel.org/r/20200528145050.5203-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Olof Johansson <olof@lixom.net> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: soc@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28bus: bt1-axi: Optimize the return points in the driverSerge Semin
It's better to have a single return statement where it's applicable instead of returning from a conditional statement if-clause. Let's do this in the request registers, clock and IRQ methods. Link: https://lore.kernel.org/r/20200528145050.5203-5-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Olof Johansson <olof@lixom.net> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: soc@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28bus: bt1-apb: Use sysfs_streq instead of strncmpSerge Semin
There is a ready-to-use method to compare a retrieved from a sysfs node string with another string. It treats both NUL and newline-then-NUL as equivalent string terminations. So use it instead of manually truncating the line length in the strncmp() method. Link: https://lore.kernel.org/r/20200528145050.5203-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Olof Johansson <olof@lixom.net> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: soc@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs methodSerge Semin
Indeed it's more optimal to use the PTR_ERR_OR_ZERO() macro there instead of having two return points. Link: https://lore.kernel.org/r/20200528145050.5203-3-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Olof Johansson <olof@lixom.net> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: soc@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28bus: bt1-apb: Fix show/store callback identationsSerge Semin
After fixing the sysfs calback return value the functions argumnets identations have been left as before the fix. That made the argments declarations being unaligned with respect to the space surrounded by the parentheses. Link: https://lore.kernel.org/r/20200528145050.5203-2-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Olof Johansson <olof@lixom.net> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: soc@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28bus: bt1-apb: Include linux/io.hSerge Semin
It must be included since we are using readl() method here. Link: https://lore.kernel.org/r/20200528145050.5203-1-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Olof Johansson <olof@lixom.net> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: soc@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28Merge branch 'nvme-5.7' of git://git.infradead.org/nvme into block-5.7Jens Axboe
Pull NVMe poll fix from Christoph. * 'nvme-5.7' of git://git.infradead.org/nvme: nvme-pci: avoid race between nvme_reap_pending_cqes() and nvme_poll()
2020-05-28PCI: hv: Use struct_size() helperGustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct hv_dr_state { ... struct hv_pcidev_description func[]; }; struct pci_bus_relations { ... struct pci_function_description func[]; } __packed; Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. So, replace the following forms: offsetof(struct hv_dr_state, func) + (sizeof(struct hv_pcidev_description) * (relations->device_count)) offsetof(struct pci_bus_relations, func) + (sizeof(struct pci_function_description) * (bus_rel->device_count)) with: struct_size(dr, func, relations->device_count) and struct_size(bus_rel, func, bus_rel->device_count) respectively. Link: https://lore.kernel.org/r/20200525164319.GA13596@embeddedor Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Wei Liu <wei.liu@kernel.org>
2020-05-28powerpc: Remove Xilinx PPC405/PPC440 supportMichal Simek
The latest Xilinx design tools called ISE and EDK has been released in October 2013. New tool doesn't support any PPC405/PPC440 new designs. These platforms are no longer supported and tested. PowerPC 405/440 port is orphan from 2013 by commit cdeb89943bfc ("MAINTAINERS: Fix incorrect status tag") and commit 19624236cce1 ("MAINTAINERS: Update Grant's email address and maintainership") that's why it is time to remove the support fot these platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/8c593895e2cb57d232d85ce4d8c3a1aa7f0869cc.1590079968.git.christophe.leroy@csgroup.eu
2020-05-28input: i8042 - Remove special PowerPC handlingNathan Chancellor
This causes a build error with CONFIG_WALNUT because kb_cs and kb_data were removed in commit 917f0af9e5a9 ("powerpc: Remove arch/ppc and include/asm-ppc"). ld.lld: error: undefined symbol: kb_cs > referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28) > input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a > referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28) > input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a > referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28) > input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a ld.lld: error: undefined symbol: kb_data > referenced by i8042.c:309 (drivers/input/serio/i8042.c:309) > input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a > referenced by i8042-ppcio.h:33 (drivers/input/serio/i8042-ppcio.h:33) > input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a > referenced by i8042.c:319 (drivers/input/serio/i8042.c:319) > input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a > referenced 15 more times Presumably since nobody has noticed this for the last 12 years, there is not anyone actually trying to use this driver so we can just remove this special walnut code and use the generic header so it builds for all configurations. Fixes: 917f0af9e5a9 ("powerpc: Remove arch/ppc and include/asm-ppc") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20200518181043.3363953-1-natechancellor@gmail.com
2020-05-28macintosh/ams-input: switch to using input device polling modeDmitry Torokhov
Now that instances of input_dev support polling mode natively, we no longer need to create input_polled_dev instance. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191002214854.GA114387@dtor-ws
2020-05-28Merge series "add ecspi ERR009165 for i.mx6/7 soc family" from Robin Gong ↵Mark Brown
<yibin.gong@nxp.com>: There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO transfer to be send twice in DMA mode. Please get more information from: https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf. The workaround is adding new sdma ram script which works in XCH mode as PIO inside sdma instead of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0. The issue should be exist on all legacy i.mx6/7 soc family before i.mx6ul. NXP fix this design issue from i.mx6ul, so newer chips including i.mx6ul/ 6ull/6sll do not need this workaroud anymore. All other i.mx6/7/8 chips still need this workaroud. This patch set add new 'fsl,imx6ul-ecspi' for ecspi driver and 'ecspi_fixed' in sdma driver to choose if need errata or not. The first two reverted patches should be the same issue, though, it seems 'fixed' by changing to other shp script. Hope Sean or Sascha could have the chance to test this patch set if could fix their issues. Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not work on i.mx8mm because the event id is zero. PS: Please get sdma firmware from below linux-firmware and copy it to your local rootfs /lib/firmware/imx/sdma. https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/imx/sdma v2: 1.Add commit log for reverted patches. 2.Add comment for 'ecspi_fixed' in sdma driver. 3.Add 'fsl,imx6sll-ecspi' compatible instead of 'fsl,imx6ul-ecspi' rather than remove. v3: 1.Confirm with design team make sure ERR009165 fixed on i.mx6ul/i.mx6ull /i.mx6sll, not fixed on i.mx8m/8mm and other i.mx6/7 legacy chips. Correct dts related dts patch in v2. 2.Clean eratta information in binding doc and new 'tx_glitch_fixed' flag in spi-imx driver to state ERR009165 fixed or not. 3.Enlarge burst size to fifo size for tx since tx_wml set to 0 in the errata workaroud, thus improve performance as possible. v4: 1.Add Ack tag from Mark and Vinod 2.Remove checking 'event_id1' zero as 'event_id0'. v5: 1.Add the last patch for compatible with the current uart driver which using rom script, so both uart ram script and rom script supported in latest firmware, by default uart rom script used. UART driver will be broken without this patch. v6: 1.Resend after rebase the latest next branch. 2.Remove below No.13~No.15 patches of v5 because they were mergered. ARM: dts: imx6ul: add dma support on ecspi ARM: dts: imx6sll: correct sdma compatible arm64: defconfig: Enable SDMA on i.mx8mq/8mm 3.Revert "dmaengine: imx-sdma: fix context cache" since 'context_loaded' removed. v7: 1.Put the last patch 13/13 'Revert "dmaengine: imx-sdma: fix context cache"' to the ahead of 03/13 'Revert "dmaengine: imx-sdma: refine to load context only once" so that no building waring during comes out during bisect. 2.Address Sascha's comments, including eliminating any i.mx6sx in this series, adding new 'is_imx6ul_ecspi()' instead imx in imx51 and taking care SMC bit for PIO. 3.Add back missing 'Reviewed-by' tag on 08/15(v5):09/13(v7) 'spi: imx: add new i.mx6ul compatible name in binding doc' v8: 1.remove 0003-Revert-dmaengine-imx-sdma-fix-context-cache.patch and merge it into 04/13 of v7 2.add 0005-spi-imx-fallback-to-PIO-if-dma-setup-failure.patch for no any ecspi function broken even if sdma firmware not updated. 3.merge 'tx.dst_maxburst' changes in the two continous patches into one patch to avoid confusion. 4.fix typo 'duplicated'. Robin Gong (13): Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core" Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores" Revert "dmaengine: imx-sdma: refine to load context only once" dmaengine: imx-sdma: remove duplicated sdma_load_context spi: imx: fallback to PIO if dma setup failure dmaengine: imx-sdma: add mcu_2_ecspi script spi: imx: fix ERR009165 spi: imx: remove ERR009165 workaround on i.mx6ul spi: imx: add new i.mx6ul compatible name in binding doc dmaengine: imx-sdma: remove ERR009165 on i.mx6ul dma: imx-sdma: add i.mx6ul compatible name dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm dmaengine: imx-sdma: add uart rom script .../devicetree/bindings/dma/fsl-imx-sdma.txt | 1 + .../devicetree/bindings/spi/fsl-imx-cspi.txt | 1 + arch/arm/boot/dts/imx6q.dtsi | 2 +- arch/arm/boot/dts/imx6qdl.dtsi | 8 +- drivers/dma/imx-sdma.c | 67 ++++++++++------ drivers/spi/spi-imx.c | 92 +++++++++++++++++++--- include/linux/platform_data/dma-imx-sdma.h | 8 +- 7 files changed, 135 insertions(+), 44 deletions(-) -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
generated by cgit (git 2.34.1) at 2025-09-19 17:38:56 +0000