| Age | Commit message (Collapse) | Author |
|---|
|
We need to add advise_mr to the list of operation setters on the ib_device
or otherwise callers to ib_set_device_ops() for advise_mr operation will
not have their callback registered.
When the advise_mr series was merged with the device ops series the
SET_DEVICE_OPS() was missed.
Fixes: 813e90b1aeaa ("IB/mlx5: Add advise_mr() support")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Longer term testing shows this patch didn't play well with MR cache and
caused to call traces during remove_mkeys().
This reverts commit bb7e22a8ab00ff9ba911a45ba8784cef9e6d6f7a.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
From device point of view both XRC target and initiator are XRC transport
type.
Fix to use the expected UID as was handled for the XRC target case to
allow its usage via verbs in DEVX context.
Fixes: 5aa3771ded54 ("IB/mlx5: Allow XRC usage via verbs in DEVX context")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
First correct the edge case to return the last element if we're
outside the range, rather than at the last element, so that
interpolation is not omitted for points between the two last entries in
the table.
Then correct the formula to perform linear interpolation based the two
points surrounding the read ADC value. The indices for temp are kept as
"hi" and "lo" to pair with the adc indices, but there's no requirement
that the temperature is provided in descendent order. mult_frac() is
used to prevent issues with overflowing the int.
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
Add support for R-Car E3 (R8A77990) thermal support.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
Add thermal support for the RZ/G2E SoC (a.k.a. R8A774C0).
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
The IP can manage to trigger interrupts on overheat situation from all
the sensors.
However, the interrupt source changes along with the last selected
source (ie. the last read sensor), which is an inconsistent behavior.
Avoid possible glitches by always selecting back only one channel which
will then be referenced as the "overheat_sensor" (arbitrarily: the first
in the DT which has a critical trip point filled in).
It is possible that the scan of all thermal zone nodes did not bring a
critical trip point from which the overheat interrupt could be
configured. In this case just complain but do not fail the probe.
Also disable sensor switch during overheat situations because changing
the channel while the system is too hot could clear the overheat state
by changing the source while the temperature is still very high.
Even if the overheat state is not declared, overheat interrupt must be
cleared by reading the DFX interrupt cause _after_ the temperature has
fallen down to the low threshold, otherwise future possible interrupts
would not be served. A work polls the corresponding register until the
overheat flag gets cleared in this case.
Suggested-by: David Sniatkiwicz <davidsn@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
When STM32_THERMAL is enabled, this overrides all previously
enabled files in the same directory, as seen from this link failure:
ERROR: "st_thermal_pm_ops" [drivers/thermal/st/st_thermal_syscfg.ko] undefined!
ERROR: "st_thermal_register" [drivers/thermal/st/st_thermal_syscfg.ko] undefined!
ERROR: "st_thermal_unregister" [drivers/thermal/st/st_thermal_syscfg.ko] undefined!
The correct syntax in Makefile requires using += instead of :=.
Fixes: 1d6931556073 ("thermal: add stm32 thermal driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
This converts license boilerplate to SPDX identifier, and removes
unnecessary lines.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
Use macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
Use macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
Put return value checks of calling imx_init_from_nvmem_cells()
into one block to save one condition block for normal case.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
The thermal driver is a standalone driver for monitoring SoC temperature
by enabling thermal sensor, so it can be enabled even when CONFIG_CPU_FREQ
is NOT set. So remove the dependency with CPU_THERMAL.
Introduce dummy function of legacy cooling register/unregister to make
thermal driver probe successfully when CONFIG_CPU_FREQ is NOT set.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
Regmap would use device name to create debugfs entries. If the device
has multiple regmaps it is recommended to use name field in regmap_config.
Fix this by providing name to the regmap configs correctly.
Without this patch we would see below error on DB820c.
qcom-tsens 4a9000.thermal-sensor: Failed to create 4a9000.thermal-sensor
debugfs directory
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
Using devm_thermal_zone_of_sensor_register allows to simplify some
error handling code, drop a label, and drop the remove function.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
By defaul of-based thermal driver do not enable hwmon.
This patch does this explicitly, so that the temperature can be read
through the common hwmon sysfs.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
Avoid warnings like this:
thermal_hwmon.h:29:1: warning: ‘thermal_remove_hwmon_sysfs’ defined but not used [-Wunused-function]
thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz)
Fixes: 0dd88793aacd ("thermal: hwmon: move hwmon support to single file")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
Some ACPI tables contain duplicate power resource references like this:
Name (_PR0, Package (0x04) // _PR0: Power Resources for D0
{
P28P,
P18P,
P18P,
CLK4
})
This causes a WARN_ON in sysfs_add_link_to_group() because we end up
adding a link to the same acpi_device twice:
sysfs: cannot create duplicate filename '/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/808622C1:00/OVTI2680:00/power_resources_D0/LNXPOWER:0a'
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.12-301.fc29.x86_64 #1
Hardware name: Insyde CherryTrail/Type2 - Board Product Name, BIOS jumperx.T87.KFBNEEA02 04/13/2016
Call Trace:
dump_stack+0x5c/0x80
sysfs_warn_dup.cold.3+0x17/0x2a
sysfs_do_create_link_sd.isra.2+0xa9/0xb0
sysfs_add_link_to_group+0x30/0x50
acpi_power_expose_list+0x74/0xa0
acpi_power_add_remove_device+0x50/0xa0
acpi_add_single_object+0x26b/0x5f0
acpi_bus_check_add+0xc4/0x250
...
To address this issue, make acpi_extract_power_resources() check for
duplicates and simply skip them when found.
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[ rjw: Subject & changelog, comments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Observing link failure as follows when CONFIG_ACPI is set but
both CONFIG_NLS and CONFIG_PCI are no set:
drivers/acpi/device_sysfs.o: In function `description_show':
device_sysfs.c:(.text+0x48a): undefined reference to `utf16s_to_utf8s'
This issue was previously addressed implicitly by commit 8a226e00eeed
(PCI: pci-label: Fix build failure when CONFIG_NLS is set to 'm' by
allmodconfig) causing PCI_LABEL to be selected when ACPI was set
which caused NLS to be selected too in that case.
However, after commit 5d32a66541c46 (PCI/ACPI: Allow ACPI to be built
without CONFIG_PCI set) it is possible to build ACPI support without
PCI, so make ACPI select NLS directly to cover that case.
Fixes: 5d32a66541c46 (PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set)
Signed-off-by: Sinan Kaya <okaya@kernel.org>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The MSI Enable bit in the MSI Capability (PCIe r4.0, sec 7.7.1.2) controls
whether a Function can request service using MSI.
i.MX6 Root Ports implement the MSI Capability and may use MSI to request
service for events like PME, hotplug, AER, etc. In addition, on i.MX6, the
MSI Enable bit controls delivery of MSI interrupts from components below
the Root Port.
Prior to f3fdfc4ac3a2 ("PCI: Remove host driver Kconfig selection of
CONFIG_PCIEPORTBUS"), enabling CONFIG_PCI_IMX6 automatically also enabled
CONFIG_PCIEPORTBUS, and when portdrv claimed the Root Ports, it set the MSI
Enable bit so it could use PME, hotplug, AER, etc. As a side effect, that
also enabled delivery of MSI interrupts from downstream components.
The imx6q-pcie driver itself does not depend on portdrv, so set MSI Enable
in imx6q-pcie so MSI from downstream components works even if nobody uses
MSI for the Root Port events.
Fixes: f3fdfc4ac3a2 ("PCI: Remove host driver Kconfig selection of CONFIG_PCIEPORTBUS")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Sven Van Asbroeck <TheSven73@googlemail.com>
Tested-by: Trent Piepho <tpiepho@impinj.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
Provide a flag to skip scanning for new VFs after SR-IOV enablement. This
can be set by implementations for which the VFs are already reported by
other means.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Provide sriov_add_vfs() as a wrapper to scan for VFs that cleans up after
itself. This is just a code simplification. No functional change.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- Page table code for AMD IOMMU now supports large pages where smaller
page-sizes were mapped before. VFIO had to work around that in the
past and I included a patch to remove it (acked by Alex Williamson)
- Patches to unmodularize a couple of IOMMU drivers that would never
work as modules anyway.
- Work to unify the the iommu-related pointers in 'struct device' into
one pointer. This work is not finished yet, but will probably be in
the next cycle.
- NUMA aware allocation in iommu-dma code
- Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver
- Scalable mode support for the Intel VT-d driver
- PM runtime improvements for the ARM-SMMU driver
- Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom
- Various smaller fixes and improvements
* tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (78 commits)
iommu: Check for iommu_ops == NULL in iommu_probe_device()
ACPI/IORT: Don't call iommu_ops->add_device directly
iommu/of: Don't call iommu_ops->add_device directly
iommu: Consolitate ->add/remove_device() calls
iommu/sysfs: Rename iommu_release_device()
dmaengine: sh: rcar-dmac: Use device_iommu_mapped()
xhci: Use device_iommu_mapped()
powerpc/iommu: Use device_iommu_mapped()
ACPI/IORT: Use device_iommu_mapped()
iommu/of: Use device_iommu_mapped()
driver core: Introduce device_iommu_mapped() function
iommu/tegra: Use helper functions to access dev->iommu_fwspec
iommu/qcom: Use helper functions to access dev->iommu_fwspec
iommu/of: Use helper functions to access dev->iommu_fwspec
iommu/mediatek: Use helper functions to access dev->iommu_fwspec
iommu/ipmmu-vmsa: Use helper functions to access dev->iommu_fwspec
iommu/dma: Use helper functions to access dev->iommu_fwspec
iommu/arm-smmu: Use helper functions to access dev->iommu_fwspec
ACPI/IORT: Use helper functions to access dev->iommu_fwspec
iommu: Introduce wrappers around dev->iommu_fwspec
...
|
|
Pull dmaengine updates from Vinod Koul:
"This includes a new driver, removes R-Mobile APE6 as it is no longer
used, sprd cyclic dma support, last batch of dma_slave_config
direction removal and random updates to bunch of drivers.
Summary:
- New driver for UniPhier MIO DMA controller
- Remove R-Mobile APE6 support
- Sprd driver updates and support for cyclic link-list
- Remove dma_slave_config direction usage from rest of drivers
- Minor updates to dmatest, dw-dmac, zynqmp and bcm dma drivers"
* tag 'dmaengine-4.21-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (48 commits)
dmaengine: qcom_hidma: convert to DEFINE_SHOW_ATTRIBUTE
dmaengine: pxa: remove DBGFS_FUNC_DECL()
dmaengine: mic_x100_dma: convert to DEFINE_SHOW_ATTRIBUTE
dmaengine: amba-pl08x: convert to DEFINE_SHOW_ATTRIBUTE
dmaengine: Documentation: Add documentation for multi chan testing
dmaengine: dmatest: Add transfer_size parameter
dmaengine: dmatest: Add alignment parameter
dmaengine: dmatest: Use fixed point div to calculate iops
dmaengine: dmatest: Add support for multi channel testing
dmaengine: rcar-dmac: Document R8A774C0 bindings
dt-bindings: dmaengine: usb-dmac: Add binding for r8a774c0
dmaengine: zynqmp_dma: replace spin_lock_bh with spin_lock_irqsave
dmaengine: sprd: Add me as one of the module authors
dmaengine: sprd: Support DMA 2-stage transfer mode
dmaengine: sprd: Support DMA link-list cyclic callback
dmaengine: sprd: Set cur_desc as NULL when free or terminate one dma channel
dmaengine: sprd: Fix the last link-list configuration
dmaengine: sprd: Get transfer residue depending on the transfer direction
dmaengine: sprd: Remove direction usage from struct dma_slave_config
dmaengine: dmatest: fix a small memory leak in dmatest_func()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- new %ptR printk format
- rename core files
- allow registration of multiple nvmem devices
New driver:
- i.MX system controller RTC
Driver updates:
- abx80x: handle voltage ioctls, correct binding doc
- m41t80: correct month in alarm reads
- pcf85363: add pcf85263 support
- pcf8523: properly handle battery low flag
- s3c: limit alarm to one year in the future as ALMYEAR is broken
- sun6i: rework clock output binding"
* tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (54 commits)
rtc: rename core files
rtc: nvmem: fix possible use after free
rtc: add i.MX system controller RTC support
dt-bindings: fsl: scu: add rtc binding
rtc: pcf2123: Add Microcrystal rv2123
rtc: class: reimplement devm_rtc_device_register
rtc: enforce rtc_timer_init private_data type
rtc: abx80x: Implement RTC_VL_READ,CLR ioctls
rtc: pcf85363: Add support for NXP pcf85263 rtc
dt-bindings: rtc: pcf85363: Document pcf85263 real-time clock
rtc: pcf8523: don't return invalid date when battery is low
dt-bindings: rtc: use a generic node name for ds1307
PM: Switch to use %ptR
m68k/mac: Switch to use %ptR
Input: hp_sdc_rtc - Switch to use %ptR
rtc: tegra: Switch to use %ptR
rtc: s5m: Switch to use %ptR
rtc: s3c: Switch to use %ptR
rtc: rx8025: Switch to use %ptR
rtc: rx6110: Switch to use %ptR
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"We have no core changes but lots of incremental development in drivers
all over the place: Renesas, NXP, Mediatek and Actions Semiconductor
keep churning out new SoCs.
I have some subtree maintainers for Renesas and Intel helping out to
keep down the load, it's been working smoothly (Samsung also have a
subtree but it was not used this cycle.)
New drivers:
- NXP (ex Freescale) i.MX 8 QXP SoC driver.
- Mediatek MT6797 SoC driver.
- Mediatek MT7629 SoC driver.
- Actions Semiconductor S700 SoC driver.
- Renesas RZ/A2 SoC driver.
- Allwinner sunxi suniv F1C100 SoC driver.
- Qualcomm PMS405 PMIC driver.
- Microsemi Ocelot Jaguar2 SoC driver.
Improvements:
- Some RT improvements (using raw spinlocks where appropriate).
- A lot of new pin sets on the Renesas PFC pin controllers.
- GPIO hogs now work on the Qualcomm SPMI/SSBI pin controller GPIO
chips, and Xway.
- Major modernization of the Intel pin control drivers.
- STM32 pin control driver will now synchronize usage of pins with
another CPU using a hardware spinlock"
* tag 'pinctrl-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (145 commits)
dt-bindings: arm: fsl-scu: add imx8qm pinctrl support
pinctrl: freescale: Break dependency on SOC_IMX8MQ for i.MX8MQ
pinctrl: imx-scu: Depend on IMX_SCU
pinctrl: ocelot: Add dependency on HAS_IOMEM
pinctrl: ocelot: add MSCC Jaguar2 support
pinctrl: bcm: ns: support updated DT binding as syscon subnode
dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon
MAINTAINERS: merge at91 pinctrl entries
pinctrl: imx8qxp: break the dependency on SOC_IMX8QXP
pinctrl: uniphier: constify uniphier_pinctrl_socdata
pinctrl: mediatek: improve Kconfig dependencies
pinctrl: msm: mark PM functions as __maybe_unused
dt-bindings: pinctrl: sunxi: Add supply properties
pinctrl: meson: meson8b: add the missing GPIO_GROUPs for BOOT and CARD
pinctrl: meson: meson8: add the missing GPIO_GROUPs for BOOT and CARD
pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs"
pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs"
pinctrl: meson: meson8b: fix the GPIO function for the GPIOAO pins
pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins
pinctrl: sh-pfc: Make pinmux_cfg_reg.var_field_width[] variable-length
...
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add TQ-Systems TQMX86 watchdog driver
- add Qualcomm PM8916 watchdog driver
- w83627hf_wdt: add quirk for Inves system
- renesas_wdt: several improvements and document r8a774c0 support
- mena21_wdt, mtx-1: Convert to use GPIO descriptor
- bcm281xx, ie6xx_wdt: convert to DEFINE_SHOW_ATTRIBUTE
- documentation: add PM usage and kernel-api: don't reference removed functions
- update bindings for MT7629 SoC
- several small fixes
* tag 'linux-watchdog-4.21-rc1' of git://www.linux-watchdog.org/linux-watchdog: (22 commits)
watchdog: tqmx86: Add watchdog driver for the IO controller
dt-bindings: watchdog: renesas-wdt: Document r8a774c0 support
watchdog: docs: kernel-api: don't reference removed functions
watchdog: add documentation for PM usage
watchdog: mtx-1: Convert to use GPIO descriptor
watchdog: mena21_wdt: Convert to GPIO descriptors
dt-bindings: watchdog: Add Qualcomm PM8916 watchdog
watchdog: Add pm8916 watchdog driver
dt-bindings: watchdog: update bindings for MT7629 SoC
watchdog: renesas_wdt: don't keep timer value during suspend/resume
watchdog: ie6xx_wdt: convert to DEFINE_SHOW_ATTRIBUTE
watchdog: bcm281xx: convert to DEFINE_SHOW_ATTRIBUTE
watchdog: asm9260_wdt: make array mode_name static, shrinks object size
watchdog/hpwdt: Update driver version.
watchdog/hpwdt: Do not claim unsupported hardware
watchdog/hpwdt: Exclude via blacklist
Watchdog: remove outdated comment
watchdog: w83627hf_wdt: Add quirk for Inves system
watchdog: cpwd: add of_node_put()
watchdog: renesas_wdt: don't set divider while watchdog is running
...
|
|
For HNAE3_DOWN_CLIENT calling hns3_nic_net_stop(), HNAE3_UP_CLIENT
should call hns3_nic_net_open(), since if the number of queue or
the map of TC has is changed before HHAE3_UP_CLIENT is called,
it will cause problem.
Also the HNS3_NIC_STATE_RESETTING flag needs to be cleared before
hns3_nic_net_open() called, and set it back while hns3_nic_net_open()
failed.
Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The BPF flow dissector expects either skb->sk or skb->dev set on
all skbs. Delay flow dissection until after skb->dev is set.
This requires calling from within an rcu read-side critical section.
That is fine, see also the call from tun_xdp_one.
Fixes: d0e13a1488ad ("flow_dissector: lookup netns by skb->sk if skb->dev is NULL")
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Misc driver updates for platforms, many of them power related.
- Rockchip adds power domain support for rk3066 and rk3188
- Amlogic adds a power measurement driver
- Allwinner adds SRAM support for three platforms (F1C100, H5, A64
C1)
- Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7
- Broadcom fixes suspend/resume with Thumb2 kernels, and improves
stability of a handful of firmware/platform interfaces
- PXA completes their conversion to dmaengine framework
- Renesas does a bunch of PM cleanups across many platforms
- Tegra adds support for suspend/resume on T186/T194, which includes
some driver cleanups and addition of wake events
- Tegra also adds a driver for memory controller (EMC) on Tegra2
- i.MX tweaks power domain bindings, and adds support for i.MX8MQ in
GPC
- Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60
and misc cleanups across several platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
ARM: at91: add support in soc driver for new SAM9X60
ARM: at91: add support in soc driver for LPDDR2 SiP
memory: omap-gpmc: Use of_node_name_eq for node name comparisons
bus: ti-sysc: Check for no-reset and no-idle flags at the child level
ARM: OMAP2+: Check also the first dts child for hwmod flags
soc: amlogic: meson-clk-measure: Add missing REGMAP_MMIO dependency
soc: imx: gpc: Increase GPC_CLK_MAX to 7
soc: renesas: rcar-sysc: Fix power domain control after system resume
soc: renesas: rcar-sysc: Merge PM Domain registration and linking
soc: renesas: rcar-sysc: Remove rcar_sysc_power_{down,up}() helpers
soc: renesas: r8a77990-sysc: Fix initialization order of 3DG-{A,B}
dt-bindings: sram: sunxi: Add compatible for the A64 SRAM C1
dt-bindings: sram: sunxi: Add bindings for the H5 with SRAM C1
dt-bindings: sram: Add Allwinner suniv F1C100s
soc: sunxi: sram: Add support for the H5 SoC system control
soc: sunxi: sram: Enable EMAC clock access for H3 variant
soc: imx: gpcv2: add support for i.MX8MQ SoC
soc: imx: gpcv2: move register access table to domain data
soc: imx: gpcv2: prefix i.MX7 specific defines
dmaengine: pxa: make the filter function internal
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm SoC platform updates from Olof Johansson:
"SoC updates, mostly refactorings and cleanups of old legacy platforms,
but also a few more things:
New SoC support this release:
- NXP/Freescale i.MX7ULP (1x Cortex-A7, Cortex-M4, graphics, etc)
- Allwinner F1C100, older platform with an ARM926-EJS (ARMv5) core
Cleanups of various platforms:
- OMAP1 ams-delta does some GPIO cleanups
- Davinci removes of at24 platform data
- Samsung cleans up old wakeup, PM debug and secondary core boot code
- Renesas moves around config options and PM code to drivers/soc for
sharing with 64-bit and more consistency
- i.MX, Broadcom and SoCFPGA all have tweaks to lowlevel debug
console setups
- SoCFPGA adds explicit selection of ARM errata and removes some
unused code
This also contains a few patches that I had queued up as fixes for
4.20 but didn't send in before the release"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits)
arm64: dts: renesas: draak: Fix CVBS input
ARM: omap2: avoid section mismatch warning
ARM: tegra: avoid section mismatch warning
ARM: ks8695: fix section mismatch warning
ARM: pxa: avoid section mismatch warning
ARM: mmp: fix pxa168_device_usb_phy use on aspenite
ARM: mmp: fix timer_init calls
ARM: OMAP1: fix USB configuration for device-only setups
ARM: OMAP1: add MMC configuration for Palm Tungsten E
ARM: imx: fix dependencies on imx7ulp
ARM: meson: select HAVE_ARM_TWD and ARM_GLOBAL_TIMER
MAINTAINERS: add drivers/soc/amlogic/ to amlogic list
ARM: imx: add initial support for imx7ulp
ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed
ARM: dts: Fix OMAP4430 SDP Ethernet startup
ARM: dts: am335x-pdu001: Fix polarity of card detection input
ARM: OMAP1: ams-delta: Fix audio permanently muted
ARM: dts: omap5: Fix dual-role mode on Super-Speed port
arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios
ARM: davinci: da850-evm: remove unnecessary include
...
|
|
Commit 33a48ab105a7 ("ibmveth: Fix DMA unmap error") fixed an issue in the
normal code path of ibmveth_xmit_start() that was originally introduced by
Commit 6e8ab30ec677 ("ibmveth: Add scatter-gather support"). This original
fix missed the error path where dma_unmap_page is wrongly called on the
header portion in descs[0] which was mapped with dma_map_single. As a
result a failure to DMA map any of the frags results in a dmesg warning
when CONFIG_DMA_API_DEBUG is enabled.
------------[ cut here ]------------
DMA-API: ibmveth 30000002: device driver frees DMA memory with wrong function
[device address=0x000000000a430000] [size=172 bytes] [mapped as page] [unmapped as single]
WARNING: CPU: 1 PID: 8426 at kernel/dma/debug.c:1085 check_unmap+0x4fc/0xe10
...
<snip>
...
DMA-API: Mapped at:
ibmveth_start_xmit+0x30c/0xb60
dev_hard_start_xmit+0x100/0x450
sch_direct_xmit+0x224/0x490
__qdisc_run+0x20c/0x980
__dev_queue_xmit+0x1bc/0xf20
This fixes the API misuse by unampping descs[0] with dma_unmap_single.
Fixes: 6e8ab30ec677 ("ibmveth: Add scatter-gather support")
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add UART driver for RDA Micro RDA8810PL SoC.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into next/late
OP-TEE dynamic shm log message
Adds a log message in the OP-TEE driver to inform that dynamic shared
memory is enabled.
* tag 'tee-subsys-optee-for-4.21' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: optee: log message if dynamic shm is enabled
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into next/late
Avoid possible double list_del in supplicant comms
A fix for the OP-TEE driver to avoid possible double list_del during
tee-supplicant communication while the system is shutting down.
* tag 'tee-subsys-fix-for-4.21' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: optee: avoid possible double list_del()
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Merge in fixes here, since the last batch didn't make it in before the
release of 4.20, and we might as well group them with this set of
patches.
* fixes: (822 commits)
arm64: dts: renesas: draak: Fix CVBS input
ARM: dts: Fix OMAP4430 SDP Ethernet startup
ARM: dts: am335x-pdu001: Fix polarity of card detection input
ARM: OMAP1: ams-delta: Fix audio permanently muted
ARM: dts: omap5: Fix dual-role mode on Super-Speed port
arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios
ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock
ARM: imx: update the cpu power up timing setting on i.mx6sx
Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K"
ARM: dts: imx7d-pico: Describe the Wifi clock
ARM: dts: realview: Fix some more duplicate regulator nodes
MAINTAINERS: update entry for MMP platform
ARM: mmp/mmp2: fix cpu_is_mmp2() on mmp2-dt
MAINTAINERS: mediatek: Update SoC entry
ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs
+ Linux 4.20-rc5
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
As of v4.20, the swim3 driver crashes when loaded on a PowerBook G3
(Wallstreet).
MacIO PCI driver attached to Gatwick chipset
MacIO PCI driver attached to Heathrow chipset
swim3 0.00015000:floppy: [fd0] SWIM3 floppy controller in media bay
0.00013020:ch-a: ttyS0 at MMIO 0xf3013020 (irq = 16, base_baud = 230400) is a Z85c30 ESCC - Serial port
0.00013000:ch-b: ttyS1 at MMIO 0xf3013000 (irq = 17, base_baud = 230400) is a Z85c30 ESCC - Infrared port
macio: fixed media-bay irq on gatwick
macio: fixed left floppy irqs
swim3 1.00015000:floppy: [fd1] Couldn't request interrupt
Unable to handle kernel paging request for data at address 0x00000024
Faulting instruction address: 0xc02652f8
Oops: Kernel access of bad area, sig: 11 [#1]
BE SMP NR_CPUS=2 PowerMac
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.20.0 #2
NIP: c02652f8 LR: c026915c CTR: c0276d1c
REGS: df43ba10 TRAP: 0300 Not tainted (4.20.0)
MSR: 00009032 <EE,ME,IR,DR,RI> CR: 28228288 XER: 00000100
DAR: 00000024 DSISR: 40000000
GPR00: c026915c df43bac0 df439060 c0731524 df494700 00000000 c06e1c08 00000001
GPR08: 00000001 00000000 df5ff220 00001032 28228282 00000000 c0004ca4 00000000
GPR16: 00000000 00000000 00000000 c073144c dfffe064 c0731524 00000120 c0586108
GPR24: c073132c c073143c c073143c 00000000 c0731524 df67cd70 df494700 00000001
NIP [c02652f8] blk_mq_free_rqs+0x28/0xf8
LR [c026915c] blk_mq_sched_tags_teardown+0x58/0x84
Call Trace:
[df43bac0] [c0045f50] flush_workqueue_prep_pwqs+0x178/0x1c4 (unreliable)
[df43bae0] [c026915c] blk_mq_sched_tags_teardown+0x58/0x84
[df43bb00] [c02697f0] blk_mq_exit_sched+0x9c/0xb8
[df43bb20] [c0252794] elevator_exit+0x84/0xa4
[df43bb40] [c0256538] blk_exit_queue+0x30/0x50
[df43bb50] [c0256640] blk_cleanup_queue+0xe8/0x184
[df43bb70] [c034732c] swim3_attach+0x330/0x5f0
[df43bbb0] [c034fb24] macio_device_probe+0x58/0xec
[df43bbd0] [c032ba88] really_probe+0x1e4/0x2f4
[df43bc00] [c032bd28] driver_probe_device+0x64/0x204
[df43bc20] [c0329ac4] bus_for_each_drv+0x60/0xac
[df43bc50] [c032b824] __device_attach+0xe8/0x160
[df43bc80] [c032ab38] bus_probe_device+0xa0/0xbc
[df43bca0] [c0327338] device_add+0x3d8/0x630
[df43bcf0] [c0350848] macio_add_one_device+0x444/0x48c
[df43bd50] [c03509f8] macio_pci_add_devices+0x168/0x1bc
[df43bd90] [c03500ec] macio_pci_probe+0xc0/0x10c
[df43bda0] [c02ad884] pci_device_probe+0xd4/0x184
[df43bdd0] [c032ba88] really_probe+0x1e4/0x2f4
[df43be00] [c032bd28] driver_probe_device+0x64/0x204
[df43be20] [c032bfcc] __driver_attach+0x104/0x108
[df43be40] [c0329a00] bus_for_each_dev+0x64/0xb4
[df43be70] [c032add8] bus_add_driver+0x154/0x238
[df43be90] [c032ca24] driver_register+0x84/0x148
[df43bea0] [c0004aa0] do_one_initcall+0x40/0x188
[df43bf00] [c0690100] kernel_init_freeable+0x138/0x1d4
[df43bf30] [c0004cbc] kernel_init+0x18/0x10c
[df43bf40] [c00121e4] ret_from_kernel_thread+0x14/0x1c
Instruction dump:
5484d97e 4bfff4f4 9421ffe0 7c0802a6 bf410008 7c9e2378 90010024 8124005c
2f890000 419e0078 81230004 7c7c1b78 <81290024> 2f890000 419e0064 81440000
---[ end trace 12025ab921a9784c ]---
Reverting commit 8ccb8cb1892b ("swim3: convert to blk-mq") resolves the
problem.
That commit added a struct blk_mq_tag_set to struct floppy_state and
initialized it with a blk_mq_init_sq_queue() call. Unfortunately, there
is a memset() in swim3_add_device() that subsequently clears the
floppy_state struct. That means fs->tag_set->ops is a NULL pointer, and
it gets dereferenced by blk_mq_free_rqs() which gets called in the
request_irq() error path. Move the memset() to fix this bug.
BTW, the request_irq() failure for the left mediabay floppy (fd1) is not
a regression. I don't know why it happens. The right media bay floppy
(fd0) works fine however.
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Fixes: 8ccb8cb1892b ("swim3: convert to blk-mq")
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When the block device is opened with FMODE_EXCL, ref_count is set to -1.
This value doesn't get reset when the device is closed which means the
device cannot be opened again. Fix this by checking for refcount <= 0
in the release method.
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We must add notrace on sched_clock_read, because it's called
by ftrace_graph_caller.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
|
Timer startup must after timer_irq_enable. For qemu, timer tick
irq hanppens but irq not enable, so it will cause qemu boot failed.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Tested-by: Liu Zhiwei <zhiwei_liu@c-sky.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
