summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-07-15Bluetooth: hci_qca: Fix build errorLuiz Augusto von Dentz
This fixes the following build error introduced by b80f4e3b8cb8 ("Bluetooth: hci_qca: schedule a devm action for disabling the clock"): drivers/bluetooth/hci_qca.c: In function ‘qca_serdev_remove’: drivers/bluetooth/hci_qca.c:2501:2: error: label at end of compound statement 2501 | default: | ^~~~~~~ Fixes: b80f4e3b8cb8 ("Bluetooth: hci_qca: schedule a devm action for disabling the clock") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: hci_qca: use the power sequencer for wcn7850 and wcn6855Bartosz Golaszewski
In preparation for using the power sequencing subsystem on sm8650 boards and X13s laptop let's make pwrseq the default for wcn7850 and wcn6855. Both these models require an enable GPIO so we can safely assume that if the property is not there, then we should try to get the power sequencer. Due to how the pwrseq lookup works - checking the provider at run-time - we cannot really do it the other way around as we'd get stuck forever on -EPROBE_DEFER. If the relevant OF node does have the 'enable-gpios' property, we fallback to the existing code for backward compatibility with older DTs. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: hci_qca: make pwrseq calls the default if availableBartosz Golaszewski
If the device has a power sequencing handle, use it first. Otherwise fall back to whatever code already exists. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: hci_qca: unduplicate calls to hci_uart_register_device()Bartosz Golaszewski
Now that all three branches of the switch end up doing the same thing, we can move the call to hci_uart_register_device() past it and unify the error message. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: hci_qca: schedule a devm action for disabling the clockBartosz Golaszewski
In preparation for unduplicating the hci_uart registration code, schedule a devres action for disabling the SUSCLK rather than doing it manually. We cannot really use devm_clk_get_enabled() as we also set the rate before enabling the clock. While this should in theory work, I don't want to risk breaking existing users. One solution for the future is to add devm_clk_get_enabled_with_rate() to the clock framework. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: btnxpuart: Fix warnings for suspend and resume functionsNeeraj Sanjay Kale
This fixes the warnings 'nxp_serdev_resume' and 'nxp_serdev_suspend' defined but not used. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202407100518.06Xxq5PK-lkp@intel.com/ Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: btnxpuart: Add system suspend and resume handlersNeeraj Sanjay Kale
This adds handling for system suspend and resume. While the host enters suspend state, the driver will drive the chip into low power state. Similarly when system is resuming, the driver will wake up the chip. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: btnxpuart: Add support for IW615 chipsetNeeraj Sanjay Kale
This adds support for IW615 chipset with it's bootloader signature and firmware file. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: btnxpuart: Add support for AW693 A1 chipsetNeeraj Sanjay Kale
This adds support for AW693 A1 chipset with it's bootloader signature and firmware file. No firmware name change needed for AW693 A0 chipset. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: btintel: Add support for Whale Peak2Kiran K
from /sys/kernel/debug/usb/devices: T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0039 Rev= 0.00 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: btintel: Add support for BlazarU coreKiran K
Add support for BlazarU core (CNVi). Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: btusb: mediatek: add ISO data transmission functionsChris Lu
This patch implements functions for ISO data send and receive in btusb driver for MediaTek's controller. MediaTek defines a specific interrupt endpoint for ISO data transmissin because the characteristics of interrupt endpoint are similar to the application of ISO data which can support guaranteed transmissin bandwidth, enough maximum data length and error checking mechanism. Driver sets up ISO interface and endpoints in btusb_mtk_setup and clears the setup in btusb_mtk_shutdown. These flow can't move to btmtk.c due to btusb_driver is only defined in btusb.c when claiming/relaesing interface. ISO packet anchor stops when driver suspending and resubmit interrupt urb for ISO data when driver resuming. Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: btmtk: move btusb_recv_acl_mtk to btmtk.cChris Lu
Move btusb_recv_acl_mtk from btusb.c to btmtk.c which holds vendor specific stuff and would make btusb.c clean. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: btmtk: move btusb_mtk_[setup, shutdown] to btmtk.cChris Lu
Move btusb_mtk_[setup, shutdown] and related function from btusb.c to btmtk.c which holds vendor specific stuff and would make btusb.c clean. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: btmtk: move btusb_mtk_hci_wmt_sync to btmtk.cChris Lu
Move btusb_mtk_hci_wmt_sync from btusb.c to btmtk.c which holds vendor specific stuff and would make btusb.c clean. Add usb.h header to btmtksdio.c/btmtkuart.c for usb related element defined in btmtk.h Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: btusb: add callback function in btusb suspend/resumeChris Lu
Add suspend/resum callback function in btusb_data which are reserved for vendor specific usage during suspend/resume. hdev->suspend will be added before stop traffic in btusb_suspend and hdev-> resume will be added after resubmit urb in btusb_resume. Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: btmtk: rename btmediatek_dataChris Lu
Rename btmediatek_data to have a consistent prefix throughout the driver. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: btusb: mediatek: return error for failed reg accessChris Lu
Update the code to immediately return an error code if accessing a related register fails. This ensures that our desired logic for subsequent register operations is maintained and allows us to promptly catch any unexpected errors. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: btusb: mediatek: remove the unnecessary goto tagChris Lu
Remove the unnecessary goto tag whether there is an error or not, we have to free the buffer at the end of the function. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x13d3:0x3591WangYuli
Add the support ID(0x13d3, 0x3591) to usb_device_id table for Realtek RTL8852BE. The device table is as follows: T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3591 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Cc: stable@vger.kernel.org Signed-off-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: WangYuli <wangyuli@uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: btintel: Fix the sfi name for BlazarUKiran K
Use INTEL_HW_VARIANT() instead of CNVi Id to decide to load Intermediate Loader (IML) image. Fix the driver loading incorrect firmware for BlazarU product. dmesg: ..... [146.111834] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [146.111839] Bluetooth: hci0: Bootloader timestamp 2022.18 buildtype 1 build 16362 [146.111848] Bluetooth: hci0: No support for _PRR ACPI method [146.112204] Bluetooth: hci0: Failed to load Intel firmware file intel/ibt-0291-0291-iml.sfi (-2) Fixes: 164c62f958f8 ("Bluetooth: btintel: Add firmware ID to firmware name") Reported-by: Tsigan, Vladislav <vladislav.tsigan@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: qca: don't disable power management for QCA6390Bartosz Golaszewski
We unnecessarily fallthrough the case for QCA6390 when initializing the device and hit the condition where - due to the lack of the enable-gpio - we disable power management despite using the power sequencer. We don't need to look for clocks on this model so it makes more sense to just register the hci device and break the switch. Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 9a15ce685706 ("Bluetooth: qca: use the power sequencer for QCA6390") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # RB5 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: hci: fix build when POWER_SEQUENCING=mKrzysztof Kozlowski
BT_HCIUART_QCA, which is a bool and an HCI UART component, uses now power sequencing, so we need to be sure BT_HCIUART_QCA=y and POWER_SEQUENCING=m cannot happen: /usr/bin/aarch64-linux-gnu-ld: drivers/bluetooth/hci_qca.o: in function `qca_serdev_probe': drivers/bluetooth/hci_qca.c:2401:(.text+0xc48): undefined reference to `devm_pwrseq_get' /usr/bin/aarch64-linux-gnu-ld: drivers/bluetooth/hci_qca.o: in function `qca_power_shutdown': drivers/bluetooth/hci_qca.c:2192:(.text+0x29e8): undefined reference to `pwrseq_power_off' /usr/bin/aarch64-linux-gnu-ld: drivers/bluetooth/hci_qca.o: in function `qca_power_on': drivers/bluetooth/hci_qca.c:1808:(.text+0x3390): undefined reference to `pwrseq_power_on' Fixes: 9a15ce685706 ("Bluetooth: qca: use the power sequencer for QCA6390") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: btintel: Fix spelling of *intermediate* in commentPaul Menzel
Fixes: f3b845e0aea3 ("Bluetooth: btintel: Add support to download intermediate loader") Cc: Kiran K <kiran.k@intel.com> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Bluetooth: qca: use the power sequencer for QCA6390Bartosz Golaszewski
Use the pwrseq subsystem's consumer API to run the power-up sequence for the Bluetooth module of the QCA6390 package. Tested-by: Amit Pundir <amit.pundir@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD, SM8650-QRD & SM8650-HDK Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-15Merge tag 'pwrseq-initial-for-v6.11' of ↵Luiz Augusto von Dentz
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into HEAD Initial implementation of the power sequencing subsystem for linux v6.11
2024-07-15net: ethernet: lantiq_etop: remove redundant device name setupAleksander Jan Bajkowski
The same name is set when allocating the netdevice structure in the alloc_etherdev_mq()->alloc_etherrdev_mqs() function. Therefore, there is no need to manually set it. This fixes CheckPatch warnings: WARNING: Prefer strscpy over strcpy - see: https://github.com/KSPP/linux/issues/88 strcpy(dev->name, "eth%d"); Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Link: https://patch.msgid.link/20240713170920.863171-1-olek2@wp.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15net: dsa: vsc73xx: start treating the BR_LEARNING flagPawel Dembicki
This patch implements .port_pre_bridge_flags() and .port_bridge_flags(), which are required for properly treating the BR_LEARNING flag. Also, .port_stp_state_set() is tweaked and now disables learning for standalone ports. Disabling learning for standalone ports is required to avoid situations where one port sees traffic originating from another, which could cause packet drops. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/20240713211620.1125910-13-paweldembicki@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15net: dsa: vsc73xx: Add bridge supportPawel Dembicki
This patch adds bridge support for the vsc73xx driver. The vsc73xx requires minimal operations and ithe generic dsa_tag_8021q_bridge_* API is sufficient. The forwarding matrix is managed by vsc73xx_port_stp_state_set() -> vsc73xx_refresh_fwd_map()i routine, which is called immediately after .port_bridge_join() and .port_bridge_leave(). Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Link: https://patch.msgid.link/20240713211620.1125910-12-paweldembicki@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15net: dsa: prepare 'dsa_tag_8021q_bridge_join' for standalone usePawel Dembicki
The 'dsa_tag_8021q_bridge_join' could be used as a generic implementation of the 'ds->ops->port_bridge_join()' function. However, it is necessary to synchronize their arguments. This patch also moves the 'tx_fwd_offload' flag configuration line into 'dsa_tag_8021q_bridge_join' body. Currently, every (sja1105) driver sets it, and the future vsc73xx implementation will also need it for simplification. Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/20240713211620.1125910-11-paweldembicki@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15net: dsa: Define max num of bridges in tag8021q implementationPawel Dembicki
Max number of bridges in tag8021q implementation is strictly limited by VBID size: 3 bits. But zero is reserved and only 7 values can be used. This patch adds define which describe maximum possible value. Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/20240713211620.1125910-10-paweldembicki@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15net: dsa: vsc73xx: Implement the tag_8021q VLAN operationsPawel Dembicki
This patch is a simple implementation of 802.1q tagging in the vsc73xx driver. Currently, devices with DSA_TAG_PROTO_NONE are not functional. The VSC73XX family doesn't provide any tag support for external Ethernet ports. The only option available is VLAN-based tagging, which requires constant hardware VLAN filtering. While the VSC73XX family supports provider bridging, it only supports QinQ without full implementation of 802.1AD. This means it only allows the doubled 0x8100 TPID. In the simple port mode, QinQ is enabled to preserve forwarding of VLAN-tagged frames. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/20240713211620.1125910-9-paweldembicki@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15net: dsa: vsc73xx: Add vlan filteringPawel Dembicki
This patch implements VLAN filtering for the vsc73xx driver. After starting VLAN filtering, the switch is reconfigured from QinQ to a simple VLAN aware mode. This is required because VSC73XX chips do not support inner VLAN tag filtering. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/20240713211620.1125910-3-paweldembicki@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15net: dsa: vsc73xx: add port_stp_state_set functionPawel Dembicki
This isn't a fully functional implementation of 802.1D, but port_stp_state_set is required for a future tag8021q operations. This implementation handles properly all states, but vsc73xx doesn't forward STP packets. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Link: https://patch.msgid.link/20240713211620.1125910-2-paweldembicki@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15IB/hfi1: Constify struct flag_tableChristophe JAILLET
'struct flag_table' are not modified in this driver. Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 302932 40271 112 343315 53d13 drivers/infiniband/hw/hfi1/chip.o After: ===== text data bss dec hex filename 311636 31567 112 343315 53d13 drivers/infiniband/hw/hfi1/chip.o Link: https://lore.kernel.org/r/782b6a648bfbbf2bb83f81a73c0460b5bb7642a1.1720959310.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-07-15irqchip/imx-irqsteer: Handle runtime power management correctlyShenwei Wang
The power domain is automatically activated from clk_prepare(). However, on certain platforms like i.MX8QM and i.MX8QXP, the power-on handling invokes sleeping functions, which triggers the 'scheduling while atomic' bug in the context switch path during device probing: BUG: scheduling while atomic: kworker/u13:1/48/0x00000002 Call trace: __schedule_bug+0x54/0x6c __schedule+0x7f0/0xa94 schedule+0x5c/0xc4 schedule_preempt_disabled+0x24/0x40 __mutex_lock.constprop.0+0x2c0/0x540 __mutex_lock_slowpath+0x14/0x20 mutex_lock+0x48/0x54 clk_prepare_lock+0x44/0xa0 clk_prepare+0x20/0x44 imx_irqsteer_resume+0x28/0xe0 pm_generic_runtime_resume+0x2c/0x44 __genpd_runtime_resume+0x30/0x80 genpd_runtime_resume+0xc8/0x2c0 __rpm_callback+0x48/0x1d8 rpm_callback+0x6c/0x78 rpm_resume+0x490/0x6b4 __pm_runtime_resume+0x50/0x94 irq_chip_pm_get+0x2c/0xa0 __irq_do_set_handler+0x178/0x24c irq_set_chained_handler_and_data+0x60/0xa4 mxc_gpio_probe+0x160/0x4b0 Cure this by implementing the irq_bus_lock/sync_unlock() interrupt chip callbacks and handle power management in them as they are invoked from non-atomic context. [ tglx: Rewrote change log, added Fixes tag ] Fixes: 0136afa08967 ("irqchip: Add driver for imx-irqsteer controller") Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240703163250.47887-1-shenwei.wang@nxp.com
2024-07-15irqchip/gic-v3: Pass #redistributor-regions to gic_of_setup_kvm_info()Geert Uytterhoeven
The caller of gic_of_setup_kvm_info() already queried DT for the value of the #redistributor-regions property. So just pass this value, instead of doing the DT look-up again in the callee. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/808286a3ac08f60585ae7e2c848e0f9b3cb79cf8.1719912215.git.geert+renesas@glider.be
2024-07-15irqchip/bcm2835: Enable SKIP_SET_WAKE and MASK_ON_SUSPENDStefan Wahren
The BCM2835 ARMCTRL interrupt controller doesn't provide any facility to configure the wakeup sources. That's the reason why the driver lacks the irq_set_wake() callback for the interrupt chip. But this prevent to properly enter power management states like "suspend to idle". Enable the flags IRQCHIP_SKIP_SET_WAKE and IRQCHIP_MASK_ON_SUSPEND so the interrupt suspend logic can handle the chip correctly. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
2024-07-15irqchip/gic-v4: Make sure a VPE is locked when VMAPP is issuedMarc Zyngier
In order to make sure that vpe->col_idx is correctly sampled when a VMAPP command is issued, the vpe_lock must be held for the VPE. This is now possible since the introduction of the per-VM vmapp_lock, which can be taken before vpe_lock in the correct locking order. Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Nianyao Tang <tangnianyao@huawei.com> Link: https://lore.kernel.org/r/20240705093155.871070-4-maz@kernel.org
2024-07-15irqchip/gic-v4: Substitute vmovp_lock for a per-VM lockMarc Zyngier
vmovp_lock is abused in a number of cases to serialise updates to vlpi_count[] and deal with map/unmap of a VM to ITSs. Instead, provide a per-VM lock and revisit the use of vlpi_count[] so that it is always wrapped in this per-VM vmapp_lock. This reduces the potential contention on a concurrent VMOVP command, and paves the way for subsequent VPE locking that holding vmovp_lock actively prevents due to the lock ordering. Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Nianyao Tang <tangnianyao@huawei.com> Link: https://lore.kernel.org/r/20240705093155.871070-3-maz@kernel.org
2024-07-15irqchip/gic-v4: Always configure affinity on VPE activationMarc Zyngier
There are currently two paths to set the initial affinity of a VPE: - at activation time on GICv4 without the stupid VMOVP list, and on GICv4.1 - at map time for GICv4 with VMOVP list The latter location may end-up modifying the affinity of VPE that is currently running, making the results unpredictible. Instead, unify the two paths, making sure to set the initial affinity only at activation time. Reported-by: Nianyao Tang <tangnianyao@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Nianyao Tang <tangnianyao@huawei.com> Link: https://lore.kernel.org/r/20240705093155.871070-2-maz@kernel.org
2024-07-15net: ti: icssg-prueth: Split out common object into moduleMD Danish Anwar
icssg_prueth.c and icssg_prueth_sr1.c drivers use multiple common .c files. These common objects are getting added to multiple modules. As a result when both drivers are enabled in .config, below warning is seen. drivers/net/ethernet/ti/Makefile: icssg/icssg_common.o is added to multiple modules: icssg-prueth icssg-prueth-sr1 drivers/net/ethernet/ti/Makefile: icssg/icssg_classifier.o is added to multiple modules: icssg-prueth icssg-prueth-sr1 drivers/net/ethernet/ti/Makefile: icssg/icssg_config.o is added to multiple modules: icssg-prueth icssg-prueth-sr1 drivers/net/ethernet/ti/Makefile: icssg/icssg_mii_cfg.o is added to multiple modules: icssg-prueth icssg-prueth-sr1 drivers/net/ethernet/ti/Makefile: icssg/icssg_stats.o is added to multiple modules: icssg-prueth icssg-prueth-sr1 drivers/net/ethernet/ti/Makefile: icssg/icssg_ethtool.o is added to multiple modules: icssg-prueth icssg-prueth-sr1 Fix this by building a new module (icssg.o) for all the common objects. Both the driver can then depend on this common module. Some APIs being exported have emac_ as the prefix which may result into confusion with other existing APIs with emac_ prefix, to avoid confusion, rename the APIs being exported with emac_ to icssg_ prefix. This also fixes below error seen when both drivers are built. ERROR: modpost: "icssg_queue_pop" [drivers/net/ethernet/ti/icssg-prueth-sr1.ko] undefined! ERROR: modpost: "icssg_queue_push" [drivers/net/ethernet/ti/icssg-prueth-sr1.ko] undefined! Reported-and-tested-by: Thorsten Leemhuis <linux@leemhuis.info> Closes: https://lore.kernel.org/oe-kbuild-all/202405182038.ncf1mL7Z-lkp@intel.com/ Fixes: 487f7323f39a ("net: ti: icssg-prueth: Add helper functions to configure FDB") Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Sai Krishna <saikrishnag@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-15thermal/drivers/sti: Cleanup code related to stih416Raphael Gallais-Pou
"st,stih416-mpe-thermal" compatible seems to appear nowhere in the device-tree nor in the documentation. Remove compatible and related code. Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com> Link: https://lore.kernel.org/r/20240708161840.102004-1-rgallaispou@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-07-15thermal/drivers/generic-adc: Simplify with dev_err_probe()Krzysztof Kozlowski
Error handling in probe() can be a bit simpler with dev_err_probe(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-12-241644e2b6e0@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-07-15thermal/drivers/generic-adc: Simplify probe() with local dev variableKrzysztof Kozlowski
Simplify the probe() function by using local 'dev' instead of &pdev->dev. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-11-241644e2b6e0@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-07-15thermal/drivers/qcom-tsens: Simplify with dev_err_probe()Krzysztof Kozlowski
Error handling in probe() can be a bit simpler with dev_err_probe(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-10-241644e2b6e0@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-07-15thermal/drivers/qcom-spmi-adc-tm5: Simplify with dev_err_probe()Krzysztof Kozlowski
Error handling in probe() can be a bit simpler with dev_err_probe(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-9-241644e2b6e0@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-07-15thermal/drivers/imx: Simplify with dev_err_probe()Krzysztof Kozlowski
Error handling in probe() can be a bit simpler with dev_err_probe(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-8-241644e2b6e0@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-07-15thermal/drivers/imx: Simplify probe() with local dev variableKrzysztof Kozlowski
Simplify the probe() function by using local 'dev' instead of &pdev->dev. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-7-241644e2b6e0@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-07-15thermal/drivers/hisi: Simplify with dev_err_probe()Krzysztof Kozlowski
Error handling in probe() can be a bit simpler with dev_err_probe(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-6-241644e2b6e0@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-12 01:16:25 +0000