summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-11-15drm/radeon/kms: fix up gpio i2c mask bits for r4xxAlex Deucher
Fixes i2c test failures when i2c_algo_bit.bit_test=1. The hw doesn't actually require a mask, so just set it to the default mask bits for r1xx-r4xx radeon ddc. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-15pch_phub: Fix MAC address writing issue for LAPIS ML7831Tomoya MORINAGA
ISSUE: Using ML7831, MAC address writing doesn't work well. CAUSE: ML7831 and EG20T have the same register map for MAC address access. However, this driver processes the writing the same as ML7223. This is not true. This driver must process the writing the same as EG20T. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Cc: Masayuki Ohtak <masa-korg@dsn.okisemi.com> Cc: Alexander Stein <alexander.stein@systec-electronic.com> Cc: Denis Turischev <denis@compulab.co.il> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15pch_phub: Improve ADE(Address Decode Enable) controlTomoya MORINAGA
Currently, external ROM access is enabled/disabled in probe()/remove(). So, when a buggy software access unanticipated memory area, in case of enabling this ADE bit, external ROM memory area can be broken. This patch enables the ADE bit only accessing external ROM area. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Cc: Masayuki Ohtak <masa-korg@dsn.okisemi.com> Cc: Alexander Stein <alexander.stein@systec-electronic.com> Cc: Denis Turischev <denis@compulab.co.il> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15pch_phub: Change company name OKI SEMICONDUCTOR to LAPIS SemiconductorTomoya MORINAGA
On October 1 in 2011, OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor Co., Ltd. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15pch_phub: Support new device LAPIS Semiconductor ML7831 IOHTomoya MORINAGA
ML7831 is companion chip for Intel Atom E6xx series. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: storage: ene_ub6250: fix compile warningsFelipe Balbi
Fix the following compile warning: | drivers/usb/storage/ene_ub6250.c: In function ‘ms_scsi_write’: | drivers/usb/storage/ene_ub6250.c:1728:6: warning: ‘result’ may \ | be used uninitialized in this function [-Wuninitialized] | drivers/usb/storage/ene_ub6250.c:1795:77: warning: ‘offset’ may \ | be used uninitialized in this function [-Wuninitialized] Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: option: add id for 3G dongle Model VT1000 of ViettelVU Tuan Duc
Add VendorID/ProductID for USB 3G dongle Model VT1000 of Viettel. Signed-off-by: VU Tuan Duc <ducvt@viettel.com.vn> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: serial: pl2303: rm duplicate idwangyanqing
I get report from customer that his usb-serial converter doesn't work well,it sometimes work, but sometimes it doesn't. The usb-serial converter's id: vendor_id product_id 0x4348 0x5523 Then I search the usb-serial codes, and there are two drivers announce support this device, pl2303 and ch341, commit 026dfaf1 cause it. Through many times to test, ch341 works well with this device, and pl2303 doesn't work quite often(it just work quite little). ch341 works well with this device, so we doesn't need pl2303 to support.I try to revert 026dfaf1 first, but it failed. So I prepare this patch by hand to revert it. Signed-off-by: Wang YanQing <Udknight@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: pch_udc: Change company name OKI SEMICONDUCTOR to LAPIS SemiconductorTomoya MORINAGA
On October 1 in 2011, OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor Co., Ltd. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: pch_udc: Support new device LAPIS Semiconductor ML7831 IOHTomoya MORINAGA
ML7831 is companion chip for Intel Atom E6xx series. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15Merge branch 'iommu/fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu * 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: omap: Fix compile failure
2011-11-15Merge branch 'fixes' of git://git.linaro.org/people/triad/linux-pinctrlLinus Torvalds
* 'fixes' of git://git.linaro.org/people/triad/linux-pinctrl: pinctrl: hide subsystem from the populace pinctrl: fix "warning: 'struct pinctrl_dev' declared inside parameter list"
2011-11-15Merge branch 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6: gpio: pca953x: propagate the errno from the chip_init functions gpio: pca953x: remove unneeded check for chip type gpio/omap: check return value from irq_alloc_generic_chip gpio/omap: replace MOD_REG_BIT macro with static inline
2011-11-15Net, libertas: Resolve memory leak in if_spi_host_to_card()Jesper Juhl
If we hit the default case in the switch in if_spi_host_to_card() we'll leak the memory we allocated for 'packet'. This patch resolves the leak by freeing the allocated memory in that case. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Dan Williams <dcbw@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-15rt2x00: Fix sleep-while-atomic bug in powersaving code.Gertjan van Wingerde
The generic powersaving code that determines after reception of a frame whether the device should go back to sleep or whether is could stay awake was calling rt2x00lib_config directly from RX tasklet context. On a number of the devices this call can actually sleep, due to having to confirm that the sleeping commands have been executed successfully. Fix this by moving the call to rt2x00lib_config to a workqueue call. This fixes bug https://bugzilla.redhat.com/show_bug.cgi?id=731672 Tested-by: Tomas Trnka <tomastrnka@gmx.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Cc: <stable@vger.kernel.org> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-15rt2x00: Add USB device ID of Buffalo WLI-UC-GNHP.Gertjan van Wingerde
This is reported to be an RT3070 based device. Reported-by: Teika Kazura <teika@lavabit.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-15watchdog: adx_wdt.c: remove driverWim Van Sebroeck
Remove the driver (that was added in v2.6.32) since the architecture has never been merged into mainline. Reported-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-11-15Merge branch 'urgent' of git://amd64.org/linux/rric into perf/urgentIngo Molnar
2011-11-15rtc: rtc-puv3: Add __devinit and __devexit markers for probe and removeAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2011-11-15drm/exynos: include linux/module.hInki Dae
Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-11-15drm/exynos: fix vblank bug.Inki Dae
In case that vblank_disable_allowed is 1, the problem that manager->pipe could be -1 at vsync interrupt handler could be induced so this patch fixes that. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-11-15drm/exynos: changed buffer structure.Inki Dae
the purpose of this patch is to consider IOMMU support in the future. EXYNOS4 SoC supports IOMMU also so the address for DMA could be physical address with IOMMU or device address with IOMMU. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-11-15drm/exynos: removed unnecessary variable.Inki Dae
Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-11-15drm/exynos: use gem create function genericallyInki Dae
this patch addes exynos_drm_gem_init() creating and initialzing a gem. allocation functions could use this function to create new gem and it changes size type of exynos_drm_gem_create structure to 64bit and also corrects comments to exynos_drm_gem_create structure. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-11-15drm/exynos: checked for null pointerSeung-Woo Kim
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-11-15drm/exynos: added crtc dpms for disable crtcJoonyoung Shim
crtc dpms is called as destroying attached fb so dpms off sould be processed. crtc dpms also can be called after crtc is detached from encoder so pipe value of manager is used to find display controller for this case Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-11-15drm/exynos: removed meaningless parameter from fbdev updateSeung-Woo Kim
drm_framebuffer already has width and height so they are meaningless as parameters when updating fb_info. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-11-15drm/exynos: restored kernel_fb_list when reiniting fb_helperJoonyoung Shim
during recreating exynos_drm_fbdev as a new display device probes, fb_helper is reinitialized but kernel fb is not changed so kernel_fb_list should be restored after fb_helper is reinitialized. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-11-15drm/exynos: changed exynos_drm_display to exynos_drm_display_opsInki Dae
exynos_drm_display has function pointes so exynos_drm_display_ops is better to describe. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-11-15drm/exynos: added manager object to connectorInki Dae
connector contains some contents for display controller so the connector also should be able to access controller through manager. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-11-15drm/exynos: fixed converting between display mode and timingSeung-Woo Kim
missing members are added into converting function between timing and display mode and refresh rate of display mode is calculated by drm mode function. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-11-15drm/exynos: fixed connector flag with hpd and interlace scan for hdmiSeung-Woo Kim
hdmi display in exynos supports hotplug event and interlace scan mode Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-11-15drm/exynos: added kms poll for handling hpd eventSeung-Woo Kim
this patch adds kms poll infrastructure to handle hotplug detection event Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-11-14usb-storage: Accept 8020i-protocol commands longer than 12 bytesAlan Stern
The 8020i protocol (also 8070i and QIC-157) uses 12-byte commands; shorter commands must be padded. Simon Detheridge reports that his 3-TB USB disk drive claims to use the 8020i protocol (which is normally meant for ATAPI devices like CD drives), and because of its large size, the disk drive requires the use of 16-byte commands. However the usb_stor_pad12_command() routine in usb-storage always sets the command length to 12, making the drive impossible to use. Since the SFF-8020i specification allows for 16-byte commands in future extensions, we may as well accept them. This patch (as1490) changes usb_stor_pad12_command() to leave commands larger than 12 bytes alone rather than truncating them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Simon Detheridge <simon@widgit.com> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-14USB: quirks: adding more quirky webcams to avoid squeaky audiosordna
The following patch contains additional affected webcam models, on top of the patches commited to linux-next 2394d67e446bf616a0885167d5f0d397bdacfdfc and 5b253d88cc6c65a23cefc457a5a4ef139913c5fc Signed-off-by: sordna <sordna@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-14pcie-gadget-spear: Add "platform:" prefix for platform modaliasAxel Lin
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf (platform: prefix MODALIAS with "platform:"), the platform modalias is prefixed with "platform:". Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Pratyush Anand <pratyush.anand@st.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-14powerpc/usb: fix type cast for address of ioremap to compatible with 64-bitShaohui Xie
Below are codes for accessing usb sysif_regs in driver: usb_sys_regs = (struct usb_sys_interface *) ((u32)dr_regs + USB_DR_SYS_OFFSET); these codes work in 32-bit, but in 64-bit, use u32 to type cast the address of ioremap is not right, and accessing members of 'usb_sys_regs' will cause call trace, so use (void *) for both 32-bit and 64-bit. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-14USB: at91: at91-ohci: fix set/get powerJean-Christophe PLAGNIOL-VILLARD
in commit aa6e52a35 we introduce the support of overcurrent notification but the set and get of the power without checking if the gpio is valid or not Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-14PM / devfreq: correct Kconfig dependencyMyungJoo Ham
Devfreq does not depend on OPP. The dependency is removed. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-14PM / devfreq: fix use after free in devfreq_remove_deviceAxel Lin
In devfreq_remove_device, calling _remove_devfreq will also free devfreq. Don't dereference devfreq->governor->no_central_polling after _remove_devfreq. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-14USB: cdc-acm: Fix disconnect() vs close() raceHavard Skinnemoen
There's a race between the USB disconnect handler and the TTY close handler which may cause the acm object to be freed while it's still being used. This may lead to things like http://article.gmane.org/gmane.linux.usb.general/54250 and https://lkml.org/lkml/2011/5/29/64 This is the simplest fix I could come up with. Holding on to open_mutex while closing the TTY device prevents acm_disconnect() from freeing the acm object between acm->port.count drops to 0 and the TTY side of the cleanups are finalized. Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Cc: Oliver Neukum <oliver@neukum.name> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-14USB: add quirk for Logitech C600 web camJosh Boyer
We've had another report of the "chipmunk" sound on a Logitech C600 webcam. This patch resolves the issue. Cc: stable <stable@vger.kernel.org> Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-14USB: EHCI: fix HUB TT scheduling issue with iso transferThomas Poussevin
The current TT scheduling doesn't allow to play and then record on a full-speed device connected to a high speed hub. The IN iso stream can only start on the first uframe (0-2 for a 165 us) because of CSPLIT transactions. For the OUT iso stream there no such restriction. uframe 0-5 are possible. The idea of this patch is that the first uframe are precious (for IN TT iso stream) and we should allocate the last uframes first if possible. For that we reverse the order of uframe allocation (last uframe first). Here an example : hid interrupt stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | ---------------------------------------------------------------------- iso OUT stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 125 | 39 | 0 | 0 | 0 | 0 | 0 | ---------------------------------------------------------------------- There no place for iso IN stream (uframe 0-2 are used) and we got "cannot submit datapipe for urb 0, error -28: not enough bandwidth" error. With the patch this become. iso OUT stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 0 | 0 | 125 | 39 | 0 | 0 | ---------------------------------------------------------------------- iso IN stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 125 | 40 | 125 | 39 | 0 | 0 | ---------------------------------------------------------------------- Signed-off-by: Matthieu Castet <matthieu.castet@parrot.com> Signed-off-by: Thomas Poussevin <thomas.poussevin@parrot.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-14USB: XHCI: resume root hubs when the controller resumesAlan Stern
This patch (as1494) fixes a problem in xhci-hcd's resume routine. When the controller is runtime-resumed, this can only mean that one of the two root hubs has made a wakeup request and therefore needs to be resumed as well. Rather than try to determine which root hub requires attention (which might be difficult in the case where a new non-SuperSpeed device has been plugged in), the patch simply resumes both root hubs. Without this change, there is a race: The controller might be put back to sleep before it can activate its IRQ line, and the wakeup condition might never get handled. The patch also simplifies the logic in xhci_resume a little, combining some repeated flag settings into a single pair of statements. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@vger.kernel.org> Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-14USB: workaround for bug in old version of GCCAlan Stern
This patch (as1491) works around a bug in GCC-3.4.6, which is still supposed to be supported. The number of microseconds in the udelay() call in quirk_usb_disable_ehci() is fixed at 100, but the compiler doesn't understand this and generates a link-time error. So we replace the otherwise unused variable "delta" with a simple constant 100. This same pattern is already used in other delay loops in that source file. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Konrad Rzepecki <krzepecki@dentonet.pl> Tested-by: Konrad Rzepecki <krzepecki@dentonet.pl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-14USB: ark3116 initialisation fixBart Hartgers
This patch for the usb serial ark3116 driver fixes an initialisation ordering bug that gets triggered on hotplug when using at least recent debian/ubuntu userspace. Without it, ark3116 serial cables don't work. Signed-off-by: Bart Hartgers <bart.hartgers@gmail.com> Tested-by: law_ence.dev@ntlworld.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-14usb: musb: fix compilation breakage introduced by de47725Felipe Balbi
commit de47725 (include: replace linux/module.h with "struct module" wherever possible) introduced a compilation breaked when it removed <linux/module.h> from <linux/device.h> which musb glue layers were (mistakenly) relying on. Include that header to fix the compile error. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-14usb: dwc3: gadget: initialize max_streamsSebastian Andrzej Siewior
Without this the gadget will never be able to allocate a stream capable endpoint. The manual says that the stream id is a 16bit id. It does not talk about an upper limit in any other way. So I think 15 is a reasonable limit :) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-14usb: gadget: renesas_usbhs: bugfix: set DATA0 when usbhsh_endpoint_alloc()Kuninori Morimoto
new endpoint should start from DATA0, but mod_host didn't care it. This patch fix it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-14usb: gadget: renesas_usbhs: bugfix: disable irq when device stopKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit (git 2.34.1) at 2025-09-19 09:52:28 +0000