| Age | Commit message (Collapse) | Author |
|---|
|
dmar_domian has stored the s1_cfg which includes the s1_pgtbl info, so
no need to store s1_pgtbl, hence drop it.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241025143339.2328991-1-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
dmar_msi_read() has been unused since 2022 in
commit cf8e8658100d ("arch: Remove Itanium (IA-64) architecture")
Remove it.
(dmar_msi_write still exists and is used once).
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20241022002702.302728-1-linux@treblig.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
GCC is not happy with the current code, e.g.:
.../iommu/intel/dmar.c:1063:9: note: ‘sprintf’ output between 6 and 15 bytes into a destination of size 13
1063 | sprintf(iommu->name, "dmar%d", iommu->seq_id);
When `make W=1` is supplied, this prevents kernel building. Fix it by
increasing the buffer size for device name and use sizeoF() instead of
hard coded constants.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241014104529.4025937-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The macro PCI_DEVID() can be used instead of compose it manually.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240829021011.4135618-1-ruanjinjie@huawei.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The domain_alloc_user ops should always allocate a guest-compatible page
table unless specific allocation flags are specified.
Currently, IOMMU_HWPT_ALLOC_NEST_PARENT and IOMMU_HWPT_ALLOC_DIRTY_TRACKING
require special handling, as both require hardware support for scalable
mode and second-stage translation. In such cases, the driver should select
a second-stage page table for the paging domain.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241021085125.192333-8-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The first stage page table is compatible across host and guest kernels.
Therefore, this driver uses the first stage page table as the default for
paging domains.
The helper first_level_by_default() determines the feasibility of using
the first stage page table based on a global policy. This policy requires
consistency in scalable mode and first stage translation capability among
all iommu units. However, this is unnecessary as domain allocation,
attachment, and removal operations are performed on a per-device basis.
The domain type (IOMMU_DOMAIN_DMA vs. IOMMU_DOMAIN_UNMANAGED) should not
be a factor in determining the first stage page table usage. Both types
are for paging domains, and there's no fundamental difference between them.
The driver should not be aware of this distinction unless the core
specifies allocation flags that require special handling.
Convert first_level_by_default() from global to per-iommu and remove the
'type' input.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241021085125.192333-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The requirement for consistent super page support across all the IOMMU
hardware in the system has been removed. In the past, if a new IOMMU
was hot-added and lacked consistent super page capability, the hot-add
process would be aborted. However, with the updated attachment semantics,
it is now permissible for the super page capability to vary among
different IOMMU hardware units.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241021085125.192333-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The attributes of a paging domain are initialized during the allocation
process, and any attempt to attach a domain that is not compatible will
result in a failure. Therefore, there is no need to update the domain
attributes at the time of domain attachment.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241021085125.192333-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The driver now supports domain_alloc_paging, ensuring that a valid device
pointer is provided whenever a paging domain is allocated. Additionally,
the dmar_domain attributes are set up at the time of allocation.
Consistent with the established semantics in the IOMMU core, if a domain is
attached to a device and found to be incompatible with the IOMMU hardware
capabilities, the operation will return an -EINVAL error. This implicitly
advises the caller to allocate a new domain for the device and attempt the
domain attachment again.
Rename prepare_domain_attach_device() to a more meaningful name.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241021085125.192333-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
With domain_alloc_paging callback supported, the legacy domain_alloc
callback will never be used anymore. Remove it to avoid dead code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241021085125.192333-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add the domain_alloc_paging callback for domain allocation using the
iommu_paging_domain_alloc() interface.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241021085125.192333-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Commit 6ed05c68cbca ("usb: musb: sunxi: Explicitly release USB PHY on
exit") will cause that usb phy @glue->xceiv is accessed after released.
1) register platform driver @sunxi_musb_driver
// get the usb phy @glue->xceiv
sunxi_musb_probe() -> devm_usb_get_phy().
2) register and unregister platform driver @musb_driver
musb_probe() -> sunxi_musb_init()
use the phy here
//the phy is released here
musb_remove() -> sunxi_musb_exit() -> devm_usb_put_phy()
3) register @musb_driver again
musb_probe() -> sunxi_musb_init()
use the phy here but the phy has been released at 2).
...
Fixed by reverting the commit, namely, removing devm_usb_put_phy()
from sunxi_musb_exit().
Fixes: 6ed05c68cbca ("usb: musb: sunxi: Explicitly release USB PHY on exit")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241029-sunxi_fix-v1-1-9431ed2ab826@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add configuration data (for consumption by the VCAP API) for the four
VCAP's that we are going to support. The following VCAP's will be
supported:
- VCAP CLM: (also known as IS0) is part of the analyzer and enables
frame classification using VCAP functionality.
- VCAP IS2: is part of ANA_ACL and enables access control lists, using
VCAP functionality.
- VCAP ES0: is part of the rewriter and enables rewriting of frames
using VCAP functionality.
- VCAP ES2: is part of EACL and enables egress access control lists
using VCAP functionality
The two VCAP's: CLM and IS2 use shared resources from the SUPER VCAP.
The SUPER VCAP is a shared pool of 6 blocks that can be distributed
freely among CLM and IS2. Each block in the pool has 3,072 addresses
with entries, actions, and counters. ES0 and ES2 does not use shared
resources.
In the configuration data for lan969x CLM uses blocks 2-4 with a total
of 6 lookups. IS2 uses blocks 0-1 with a total of 4 lookups.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Platform VCAP data for each VCAP instance is auto-generated using an
internal Microchip tool. The generated VCAP data contains information
about keyfields, keyfield sets, actionfields, actionfield sets and
typegroups, which in combination are used to encode and decode rules in
the VCAP.
Add the auto-generated VCAP file lan969x_vcap_ag_api.c and assign the
two structs: lan969x_vcaps and lan969x_vcap_stats to the match data.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The is_sparx5() check was introduced in an earlier series, to make sure
the sparx5_vcap_init() was not executed on lan969x, as it was not
implemented there yet. Now that it is, remove that check.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In preparation for lan969x VCAP support, add the following three new
VCAP constants to match data:
- vcaps_cfg (contains configuration data for each VCAP).
- vcaps (contains auto-generated information about VCAP keys and
actions).
- vcap_stats: (contains auto-generated string names of all the keys
and actions)
Add these constants to the Sparx5 match data constants and use them to
initialize the VCAP's in sparx5_vcap_init().
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The Sparx5 VCAP implementation uses the SPX5_PORTS symbol to iterate over
the 65 front ports of Sparx5. Replace the use with the n_ports constant
from the match data, which translates to 65 of Sparx5 and 30 on lan969x.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In preparation for lan969x VCAP support, expose the following symbols for
use by the lan969x VCAP implementation:
- The symbols SPARX5_*_LOOKUPS defines the number of lookups in each
VCAP instance. These are the same for lan969x. Move them to the
header file.
- The struct sparx5_vcap_inst encapsulates information about a single
VCAP instance. Move this struct to the header file and declare the
sparx5_vcap_inst_cfg as extern.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The use of (of|device)_property_read_bool() for non-boolean properties
is deprecated in favor of of_property_present() when testing for
property presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20241104190820.277702-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
use ATOMIC64_INIT() not ATOMIC_INIT() for atomic64_t
Fixes: 3f09a0cd4ea3 ("drm: Add common fdinfo helper")
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240111023045.50013-1-jsg@jsg.id.au
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add basic HDMI video output support. Currently, only RGB888 output
pixel format is supported. At the LVDS input side, the driver
supports single LVDS link and dual LVDS links with "jeida-24" LVDS
mapping.
Product link:
https://www.ite.com.tw/en/product/cate1/IT6263
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104032806.611890-11-victor.liu@nxp.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
drm_of_lvds_get_dual_link_pixel_order() gets LVDS dual-link source pixel
order. Similar to it, add it's counterpart function
drm_of_lvds_get_dual_link_pixel_order_sink() to get LVDS dual-link sink
pixel order.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104032806.611890-7-victor.liu@nxp.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add MEDIA_BUS_FMT_RGB101010_1X7X5_{JEIDA,SPWG} support in
drm_of_lvds_get_data_mapping() function implementation so that function
callers may get the two LVDS data mappings.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104032806.611890-6-victor.liu@nxp.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Now, the premapped mode can be enabled unconditionally.
So we can remove the failover code for merge and small mode.
The virtnet_rq_xxx() helper would be only used if the mode is using pre
mapping. A check is added to prevent misusing of these API.
Tested-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the virtio core will perform a dma operation for each
buffer. Although, the same page may be operated multiple times.
In premapped mod, we can perform only one dma operation for the pages of
the alloc frag. This is beneficial for the iommu device.
kernel command line: intel_iommu=on iommu.passthrough=0
| strict=0 | strict=1
Before | 775496pps | 428614pps
After | 1109316pps | 742853pps
In the 6.11, we disabled this feature because a regress [1].
Now, we fix the problem and re-enable it.
[1]: http://lore.kernel.org/all/8b20cc28-45a9-4643-8e87-ba164a540c0a@oracle.com
Tested-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The virtio-net big mode did not enable premapped mode,
so we did not need to check the unmap. And the subsequent
commit will remove the failover code for failing enable
premapped for merge and small mode. So we need to remove
the checking do_dma code in the big mode path.
Tested-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When the frag just got a page, then may lead to regression on VM.
Specially if the sysctl net.core.high_order_alloc_disable value is 1,
then the frag always get a page when do refill.
Which could see reliable crashes or scp failure (scp a file 100M in size
to VM).
The issue is that the virtnet_rq_dma takes up 16 bytes at the beginning
of a new frag. When the frag size is larger than PAGE_SIZE,
everything is fine. However, if the frag is only one page and the
total size of the buffer and virtnet_rq_dma is larger than one page, an
overflow may occur.
The commit f9dac92ba908 ("virtio_ring: enable premapped mode whatever
use_dma_api") introduced this problem. And we reverted some commits to
fix this in last linux version. Now we try to enable it and fix this
bug directly.
Here, when the frag size is not enough, we reduce the buffer len to fix
this problem.
Reported-by: "Si-Wei Liu" <si-wei.liu@oracle.com>
Tested-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The arm-smmuv3-iommufd.c file will need to call these functions too.
Remove statics and put them in the header file. Remove the kunit
visibility protections from arm_smmu_make_abort_ste() and
arm_smmu_make_s2_domain_ste().
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Donald Dutile <ddutile@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
For SMMUv3 the parent must be a S2 domain, which can be composed
into a IOMMU_DOMAIN_NESTED.
In future the S2 parent will also need a VMID linked to the VIOMMU and
even to KVM.
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
For virtualization cases the IDR/IIDR/AIDR values of the actual SMMU
instance need to be available to the VMM so it can construct an
appropriate vSMMUv3 that reflects the correct HW capabilities.
For userspace page tables these values are required to constrain the valid
values within the CD table and the IOPTEs.
The kernel does not sanitize these values. If building a VMM then
userspace is required to only forward bits into a VM that it knows it can
implement. Some bits will also require a VMM to detect if appropriate
kernel support is available such as for ATS and BTM.
Start a new file and kconfig for the advanced iommufd support. This lets
it be compiled out for kernels that are not intended to support
virtualization, and allows distros to leave it disabled until they are
shipping a matching qemu too.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
HW with CANWBS is always cache coherent and ignores PCI No Snoop requests
as well. This meets the requirement for IOMMU_CAP_ENFORCE_CACHE_COHERENCY,
so let's return it.
Implement the enforce_cache_coherency() op to reject attaching devices
that don't have CANWBS.
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Donald Dutile <ddutile@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The IORT spec, Issue E.f (April 2024), adds a new CANWBS bit to the Memory
Access Flag field in the Memory Access Properties table, mainly for a PCI
Root Complex.
This CANWBS defines the coherency of memory accesses to be not marked IOWB
cacheable/shareable. Its value further implies the coherency impact from a
pair of mismatched memory attributes (e.g. in a nested translation case):
0x0: Use of mismatched memory attributes for accesses made by this
device may lead to a loss of coherency.
0x1: Coherency of accesses made by this device to locations in
Conventional memory are ensured as follows, even if the memory
attributes for the accesses presented by the device or provided by
the SMMU are different from Inner and Outer Write-back cacheable,
Shareable.
Note that the loss of coherency on a CANWBS-unsupported HW typically could
occur to an SMMU that doesn't implement the S2FWB feature where additional
cache flush operations would be required to prevent that from happening.
Add a new ACPI_IORT_MF_CANWBS flag and set IOMMU_FWSPEC_PCI_RC_CANWBS upon
the presence of this new flag.
CANWBS and S2FWB are similar features, in that they both guarantee the VM
can not violate coherency, however S2FWB can be bypassed by PCI No Snoop
TLPs, while CANWBS cannot. Thus CANWBS meets the requirements to set
IOMMU_CAP_ENFORCE_CACHE_COHERENCY.
Architecturally ARM has expected that VFIO would disable No Snoop through
PCI Config space, if this is done then the two would have the same
protections.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This control causes the ARM SMMU drivers to choose a stage 2
implementation for the IO pagetable (vs the stage 1 usual default),
however this choice has no significant visible impact to the VFIO
user. Further qemu never implemented this and no other userspace user is
known.
The original description in commit f5c9ecebaf2a ("vfio/iommu_type1: add
new VFIO_TYPE1_NESTING_IOMMU IOMMU type") suggested this was to "provide
SMMU translation services to the guest operating system" however the rest
of the API to set the guest table pointer for the stage 1 and manage
invalidation was never completed, or at least never upstreamed, rendering
this part useless dead code.
Upstream has now settled on iommufd as the uAPI for controlling nested
translation. Choosing the stage 2 implementation should be done by through
the IOMMU_HWPT_ALLOC_NEST_PARENT flag during domain allocation.
Remove VFIO_TYPE1_NESTING_IOMMU and everything under it including the
enable_nesting iommu_domain_op.
Just in-case there is some userspace using this continue to treat
requesting it as a NOP, but do not advertise support any more.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Donald Dutile <ddutile@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If device_link_add() fails, it returns NULL pointer not ERR_PTR(),
replace IS_ERR() with NULL pointer check, and return -EINVAL.
Fixes: d3a0946d7ac9 ("clk: imx: imx8: add audio clock mux driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241026112452.1523-1-yangyingliang@huaweicloud.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
On i.MX8QM, HDMI LPCG clocks operation needs SCU clock "hdmi_ipg_clk"
to be ON. While during noirq suspend phase, "hdmi_ipg_clk" is disabled
by HDMI IRQ STEER driver, so SError will be triggered when accessing
the HDMI LPCG registers.
Skip all HDMI LPCG clocks save/restore to avoid SError during
system suspend/resume, it will NOT introduce additional power consumption
as their parent clock is disabled when suspend.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-5-89152574d1d7@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
The scu clk_ops only inplements prepare() and unprepare() callback.
Saving the clock state during suspend by checking clk_hw_is_enabled()
is not safe as it's possible that some device drivers may only
disable the clocks without unprepare. Then the state retention will not
work for such clocks.
Fixing it by checking clk_hw_is_prepared() which is more reasonable
and safe.
Fixes: d0409631f466 ("clk: imx: scu: add suspend/resume support")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-4-89152574d1d7@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
To i.MX93 which features dual Cortex-A55 cores and DSU, when using
writel_relaxed to write value to PLL registers, the value might be
buffered. To make sure the value has been written into the hardware,
using readl to read back the register could achieve the goal.
current PLL power up flow can be simplified as below:
1. writel_relaxed to set the PLL POWERUP bit;
2. readl_poll_timeout to check the PLL lock bit:
a). timeout = ktime_add_us(ktime_get(), timeout_us);
b). readl the pll the lock reg;
c). check if the pll lock bit ready
d). check if timeout
But in some corner cases, both the write in step 1 and read in
step 2 will be blocked by other bus transaction in the SoC for a
long time, saying the value into real hardware is just before step b).
That means the timeout counting has begins for quite sometime since
step a), but value still not written into real hardware until bus
released just at a point before step b).
Then there maybe chances that the pll lock bit is not ready
when readl done but the timeout happens. readl_poll_timeout will
err return due to timeout. To avoid such unexpected failure,
read back the reg to make sure the write has been done in HW
reg.
So use readl after writel_relaxed to fix the issue.
Since we are here, to avoid udelay to run before writel_relaxed, use
readl before udelay.
Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Co-developed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-3-89152574d1d7@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
Per i.MX93 Reference Mannual 22.4 Initialization information
1. Program appropriate value of DIV[ODIV], DIV[RDIV] and DIV[MFI]
as per Integer mode.
2. Wait for 5 μs.
3. Program the following field in CTRL register.
Set CTRL[POWERUP] to 1'b1 to enable PLL block.
4. Poll PLL_STATUS[PLL_LOCK] register, and wait till PLL_STATUS[PLL_LOCK]
is 1'b1 and pll_lock output signal is 1'b1.
5. Set CTRL[CLKMUX_EN] to 1'b1 to enable PLL output clock.
So move the CLKMUX_EN operation after PLL locked.
Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Co-developed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-2-89152574d1d7@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
Back-to-back LPCG writes can be ignored by the LPCG register due to
a HW bug. The writes need to be separated by at least 4 cycles of
the gated clock. See https://www.nxp.com.cn/docs/en/errata/IMX8_1N94W.pdf
The workaround is implemented as follows:
1. For clocks running greater than or equal to 24MHz, a read
followed by the write will provide sufficient delay.
2. For clocks running below 24MHz, add a delay of 4 clock cylces
after the write to the LPCG register.
Fixes: 2f77296d3df9 ("clk: imx: add lpcg clock support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241027-imx-clk-v1-v3-1-89152574d1d7@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.13 (take two)
- Use the gpiochip_populate_parent_fwspec_twocell() helper.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
We need the driver-core fix/revert in here as well to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On RZ/G3S the watchdog can be part of a software-controlled PM domain. In
this case, the watchdog device need to be powered on in
struct watchdog_ops::restart API. This can be done though
pm_runtime_resume_and_get() API if the watchdog PM domain and watchdog
device are marked as IRQ safe. We mark the watchdog PM domain as IRQ safe
with GENPD_FLAG_IRQ_SAFE when the watchdog PM domain is registered and the
watchdog device though pm_runtime_irq_safe().
Before commit e4cf89596c1f ("watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait
context'") pm_runtime_get_sync() was used in watchdog restart handler
(which is similar to pm_runtime_resume_and_get() except the later one
handles the runtime resume errors).
Commit e4cf89596c1f ("watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait
context'") dropped the pm_runtime_get_sync() and replaced it with
clk_prepare_enable() to avoid invalid wait context due to genpd_lock()
in genpd_runtime_resume() being called from atomic context. But
clk_prepare_enable() doesn't fit for this either (as reported by
Ulf Hansson) as clk_prepare() can also sleep (it just not throw invalid
wait context warning as it is not written for this).
Because the watchdog device is marked now as IRQ safe (though this patch)
the irq_safe_dev_in_sleep_domain() call from genpd_runtime_resume() returns
1 for devices not registering an IRQ safe PM domain for watchdog (as the
watchdog device is IRQ safe, PM domain is not and watchdog PM domain is
always-on), this being the case for RZ/G3S with old device trees and
the rest of the SoCs that use this driver, we can now drop also the
clk_prepare_enable() calls in restart handler and rely on
pm_runtime_resume_and_get().
Thus, drop clk_prepare_enable() and use pm_runtime_resume_and_get() in
watchdog restart handler.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241015164732.4085249-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/watchdog/ to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
While touching these files, make indention of the struct initializer
consistent in several files.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241010203622.839625-4-u.kleine-koenig@baylibre.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
For the watchdog timer to work properly on the QCML04 board we need to
set PWRGD enable in the Environment Controller Configuration Registers
Special Configuration Register 1 when it is not already set, this may
be the case when the watchdog is not enabled from within the BIOS.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241025063441.3494837-1-james.hilliard1@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Use the DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to
handle the .suspend/.resume callbacks.
These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_SUSPEND is disabled, without having
to use __maybe_unused notation.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241018135821.274376-2-festevam@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Using the 'use_sw_pm' variable as global is not recommended
as it prevents multi instances of the driver to run.
Make it a member of the da9063 structure instead.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241018135821.274376-1-festevam@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This driver has a number of issues (accesses arbitrary I/O ports
without identifying the hardware, doesn't document what hardware it
supports, suspiciously inconsistent locking model, doesn't implement
WDIOC_SETTIMEOUT, potential integer overflow...)
The driver was added in 2003 and there's no evidence that it has any
recent user, all changes seem to be tree-wide, subsystem-wide, or the
result of static code analysis. So I believe we should simply drop
this legacy piece of code.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Message-ID: <20241011170710.484a257a@endymion.delvare>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241022114731.31f69c94@endymion.delvare
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add support for Airoha EN7851 watchdog. This is a very basic watchdog
with no pretimeout support, max timeout is 28 seconds and it ticks based
on half the SoC BUS clock.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241011104411.28659-2-ansuelsmth@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The core will do this already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241004200314.5459-10-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The core will do this already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Link: https://lore.kernel.org/r/20241004200314.5459-9-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
