| Age | Commit message (Collapse) | Author |
|---|
|
In commit 35eba185fd1a ("i2c: designware: Calculate SCL timing parameter
for High Speed Mode") the SCL high period count and low period count for
high speed mode are calculated based on fixed tHIGH = 160 and tLOW = 120.
However, the set of two fixed values is only applicable to the combination
of hardware parameters IC_CAP_LOADING is 400 and IC_CLK_FREQ_OPTIMIZATION
is true. Outside of this combination, the SCL frequency may not reach
3.4 MHz because the fixed tHIGH and tLOW are not small enough.
If IC_CAP_LOADING is 400, it means the bus capacitance is 400pF;
Otherwise, 100 pF. If IC_CLK_FREQ_OPTIMIZATION is true, it means that the
hardware reduces its internal clock frequency by reducing the internal
latency required to generate the high period and low period of the SCL line.
Section 3.15.4.5 in DesignWare DW_apb_i2b Databook v2.03 says that when
IC_CLK_FREQ_OPTIMIZATION = 0,
MIN_SCL_HIGHtime = 60 ns for 3.4 Mbps, bus loading = 100pF
= 120 ns for 3.4 Mbps, bus loading = 400pF
MIN_SCL_LOWtime = 160 ns for 3.4 Mbps, bus loading = 100pF
= 320 ns for 3.4 Mbps, bus loading = 400pF
and section 3.15.4.6 says that when IC_CLK_FREQ_OPTIMIZATION = 1,
MIN_SCL_HIGHtime = 60 ns for 3.4 Mbps, bus loading = 100pF
= 160 ns for 3.4 Mbps, bus loading = 400pF
MIN_SCL_LOWtime = 120 ns for 3.4 Mbps, bus loading = 100pF
= 320 ns for 3.4 Mbps, bus loading = 400pF
In order to calculate more accurate SCL high period count and low period
count for high speed mode, two hardware parameters IC_CAP_LOADING and
IC_CLK_FREQ_OPTIMIZATION must be considered together. Since there're no
registers controlliing these these two hardware parameters, users can
declare them in the device tree so that the driver can obtain them.
Signed-off-by: Michael Wu <michael.wu@kneron.us>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
- BRCR value must go into the BRCR1 field when in high-speed mode.
It goes into BRCR2 otherwise.
- Remove fallback to standard mode if priv->sm > I2C_FREQ_MODE_FAST.
- Set SM properly in probe; previously it only checked STANDARD versus
FAST. Now we set STANDARD, FAST, FAST_PLUS or HIGH_SPEED.
- Remove all comment sections saying we only support low-speeds.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Current BRCR computation is:
brcr = floor(i2cclk / (clkfreq * div))
With brcr: "baud rate counter", an internal clock divider,
and i2cclk: input clock rate (24MHz, 38.4MHz or 48MHz),
and clkfreq: desired bus rate,
and div: speed-mode dependent divider (2 for standard, 3 otherwise).
Assume i2cclk=48MHz, clkfreq=3.4MHz, div=3,
then brcr = floor(48MHz / (3.4MHz * 3)) = 4
and resulting bus rate = 48MHz / (4 * 3) = 4MHz
Assume i2cclk=38.4MHz, clkfreq=1.0MHz, div=3,
then brcr = floor(38.4MHz / (1.0MHz * 3)) = 12
and resulting bus rate = 38.4MHz / (12 * 3) = 1066kHz
The current computation means we always pick the smallest divider that
gives a bus rate above target. We should instead pick the largest
divider that gives a bus rate below target, using:
brcr = floor(i2cclk / (clkfreq * div)) + 1
If we redo the above examples:
Assume i2cclk=48MHz, clkfreq=3.4MHz, div=3,
then brcr = floor(48MHz / (3.4MHz * 3)) + 1 = 5
and resulting bus rate = 48MHz / (5 * 3) = 3.2MHz
Assume i2cclk=38.4MHz, clkfreq=1.0MHz, div=3,
then brcr = floor(38.4MHz / (1.0MHz * 3)) + 1 = 13
and resulting bus rate = 38.4MHz / (13 * 3) = 985kHz
In kernel C code, floor(x) is DIV_ROUND_DOWN() and,
floor(x)+1 is DIV_ROUND_UP().
This is much less of an issue with slower bus rates (ie those currently
supported), because the gap from one divider to the next is much
smaller. It however keeps us from always using bus rates superior to
the target.
This fix is required for later on supporting faster bus rates:
I2C_FREQ_MODE_FAST_PLUS (1MHz) and I2C_FREQ_MODE_HIGH_SPEED (3.4MHz).
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Add EyeQ6H support to the nmk-i2c AMBA driver. It shares the same quirk
as EyeQ5: the memory bus only supports 32-bit accesses. Avoid writeb()
and readb() by reusing the same `priv->has_32b_bus` flag.
It does NOT need to write speed-mode specific value into a register;
therefore it does not depend on the mobileye,olb DT property.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Compatible-specific behavior is implemented using a if-condition on the
return value from of_device_is_compatible(), from probe. It does not
scale well when compatible number increases. Switch to using a match
table and a call to of_match_device().
We DO NOT attach a .of_match_table field to our amba driver, as we do
not use the table to match our driver to devices.
Sort probe variable declarations in reverse christmas tree to try and
introduce some logic into the ordering.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Enable DWAPB I2C controller support on FUJITSU-MONAKA.
This will be used in the FUJITSU-MONAKA server scheduled
for shipment in 2027.
The DSDT information obtained when verified using an
in-house simulator is presented below.
Device (SMB0)
{
Name (_HID, "FUJI200B") // _HID: Hardware ID
Name (_UID, Zero) // _UID: Unique ID
...
Name (_CRS, ResourceTemplate ()
{
Memory32Fixed (ReadWrite,
0x2A4B0000, // Address Base
0x00010000, // Address Length
)
Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
{
0x00000159,
}
})
...
}
The expression SMB0 is used to indicate SMBus HC#0,
a string of up to four characters.
Created the SMB0 object according to the following
specifications:
ACPI Specification
13.2. Accessing the SMBus from ASL Code
https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/13_ACPI_System_Mgmt_Bus_Interface_Spec/accessing-the-smbus-from-asl-code.html
IPMI Specification
Example 4: SSIF Interface(P574)
https://www.intel.co.jp/content/www/jp/ja/products/docs/servers/ipmi/ipmi-second-gen-interface-spec-v2-rev1-1.html
Signed-off-by: Yoshihiro Furudera <fj5100bi@fujitsu.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
There's no reason for this driver to use OF-specific property helpers.
Drop the last one in favor of the generic variant and no longer include
of.h.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
phydev->eee_cfg.eee_enabled
This is a follow-up to 41ffcd95015f ("net: phy: fix phylib's dual
eee_enabled") and resolves an issue with genphy_c45_an_config_eee_aneg()
(called from genphy_c45_ethtool_set_eee) not seeing the new value of
phydev->eee_cfg.eee_enabled.
Fixes: 49168d1980e2 ("net: phy: Add phy_support_eee() indicating MAC support EEE")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reported-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull kvm updates from Paolo Bonzini:
"The biggest change here is eliminating the awful idea that KVM had of
essentially guessing which pfns are refcounted pages.
The reason to do so was that KVM needs to map both non-refcounted
pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP
VMAs that contain refcounted pages.
However, the result was security issues in the past, and more recently
the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by
struct page but is not refcounted. In particular this broke virtio-gpu
blob resources (which directly map host graphics buffers into the
guest as "vram" for the virtio-gpu device) with the amdgpu driver,
because amdgpu allocates non-compound higher order pages and the tail
pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the
per-architecture code, to always work on the pfn whenever possible.
The large series that did this, from David Stevens and Sean
Christopherson, also cleaned up substantially the set of functions
that provided arch code with the pfn for a host virtual addresses.
The previous maze of twisty little passages, all different, is
replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the
non-__ versions of these two, and kvm_prefetch_pages) saving almost
200 lines of code.
ARM:
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This
call was introduced in PSCIv1.3 as a mechanism to request
hibernation, similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested
synchronous external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
- Add iocsr and mmio bus simulation in kernel.
- Add in-kernel interrupt controller emulation.
- Add support for virtualization extensions to the eiointc irqchip.
PPC:
- Drop lingering and utterly obsolete references to PPC970 KVM, which
was removed 10 years ago.
- Fix incorrect documentation references to non-existing ioctls
RISC-V:
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
s390:
- New selftests: more ucontrol selftests and CPU model sanity checks
- Support for the gen17 CPU model
- List registers supported by KVM_GET/SET_ONE_REG in the
documentation
x86:
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code,
improve documentation, harden against unexpected changes.
Even if the hardware A/D tracking is disabled, it is possible to
use the hardware-defined A/D bits to track if a PFN is Accessed
and/or Dirty, and that removes a lot of special cases.
- Elide TLB flushes when aging secondary PTEs, as has been done in
x86's primary MMU for over 10 years.
- Recover huge pages in-place in the TDP MMU when dirty page logging
is toggled off, instead of zapping them and waiting until the page
is re-accessed to create a huge mapping. This reduces vCPU jitter.
- Batch TLB flushes when dirty page logging is toggled off. This
reduces the time it takes to disable dirty logging by ~3x.
- Remove the shrinker that was (poorly) attempting to reclaim shadow
page tables in low-memory situations.
- Clean up and optimize KVM's handling of writes to
MSR_IA32_APICBASE.
- Advertise CPUIDs for new instructions in Clearwater Forest
- Quirk KVM's misguided behavior of initialized certain feature MSRs
to their maximum supported feature set, which can result in KVM
creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to
a non-zero value results in the vCPU having invalid state if
userspace hides PDCM from the guest, which in turn can lead to
save/restore failures.
- Fix KVM's handling of non-canonical checks for vCPUs that support
LA57 to better follow the "architecture", in quotes because the
actual behavior is poorly documented. E.g. most MSR writes and
descriptor table loads ignore CR4.LA57 and operate purely on
whether the CPU supports LA57.
- Bypass the register cache when querying CPL from kvm_sched_out(),
as filling the cache from IRQ context is generally unsafe; harden
the cache accessors to try to prevent similar issues from occuring
in the future. The issue that triggered this change was already
fixed in 6.12, but was still kinda latent.
- Advertise AMD_IBPB_RET to userspace, and fix a related bug where
KVM over-advertises SPEC_CTRL when trying to support cross-vendor
VMs.
- Minor cleanups
- Switch hugepage recovery thread to use vhost_task.
These kthreads can consume significant amounts of CPU time on
behalf of a VM or in response to how the VM behaves (for example
how it accesses its memory); therefore KVM tried to place the
thread in the VM's cgroups and charge the CPU time consumed by that
work to the VM's container.
However the kthreads did not process SIGSTOP/SIGCONT, and therefore
cgroups which had KVM instances inside could not complete freezing.
Fix this by replacing the kthread with a PF_USER_WORKER thread, via
the vhost_task abstraction. Another 100+ lines removed, with
generally better behavior too like having these threads properly
parented in the process tree.
- Revert a workaround for an old CPU erratum (Nehalem/Westmere) that
didn't really work; there was really nothing to work around anyway:
the broken patch was meant to fix nested virtualization, but the
PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the
erratum.
- Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is
'y'.
x86 selftests:
- x86 selftests can now use AVX.
Documentation:
- Use rST internal links
- Reorganize the introduction to the API document
Generic:
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock
instead of RCU, so that running a vCPU on a different task doesn't
encounter long due to having to wait for all CPUs become quiescent.
In general both reads and writes are rare, but userspace that
supports confidential computing is introducing the use of "helper"
vCPUs that may jump from one host processor to another. Those will
be very happy to trigger a synchronize_rcu(), and the effect on
performance is quite the disaster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (298 commits)
KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD
KVM: x86: add back X86_LOCAL_APIC dependency
Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()"
KVM: x86: switch hugepage recovery thread to vhost_task
KVM: x86: expose MSR_PLATFORM_INFO as a feature MSR
x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest
Documentation: KVM: fix malformed table
irqchip/loongson-eiointc: Add virt extension support
LoongArch: KVM: Add irqfd support
LoongArch: KVM: Add PCHPIC user mode read and write functions
LoongArch: KVM: Add PCHPIC read and write functions
LoongArch: KVM: Add PCHPIC device support
LoongArch: KVM: Add EIOINTC user mode read and write functions
LoongArch: KVM: Add EIOINTC read and write functions
LoongArch: KVM: Add EIOINTC device support
LoongArch: KVM: Add IPI user mode read and write function
LoongArch: KVM: Add IPI read and write function
LoongArch: KVM: Add IPI device support
LoongArch: KVM: Add iocsr and mmio bus simulation in kernel
KVM: arm64: Pass on SVE mapping failures
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Rework kfence support for the HPT MMU to work on systems with >= 16TB
of RAM.
- Remove the powerpc "maple" platform, used by the "Yellow Dog
Powerstation".
- Add support for DYNAMIC_FTRACE_WITH_CALL_OPS,
DYNAMIC_FTRACE_WITH_DIRECT_CALLS & BPF Trampolines.
- Add support for running KVM nested guests on Power11.
- Other small features, cleanups and fixes.
Thanks to Amit Machhiwal, Arnd Bergmann, Christophe Leroy, Costa
Shulyupin, David Hunter, David Wang, Disha Goel, Gautam Menghani, Geert
Uytterhoeven, Hari Bathini, Julia Lawall, Kajol Jain, Keith Packard,
Lukas Bulwahn, Madhavan Srinivasan, Markus Elfring, Michal Suchanek,
Ming Lei, Mukesh Kumar Chaurasiya, Nathan Chancellor, Naveen N Rao,
Nicholas Piggin, Nysal Jan K.A, Paulo Miguel Almeida, Pavithra Prakash,
Ritesh Harjani (IBM), Rob Herring (Arm), Sachin P Bappalige, Shen
Lichuan, Simon Horman, Sourabh Jain, Thomas Weißschuh, Thorsten Blum,
Thorsten Leemhuis, Venkat Rao Bagalkote, Zhang Zekun, and zhang jiao.
* tag 'powerpc-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (89 commits)
EDAC/powerpc: Remove PPC_MAPLE drivers
powerpc/perf: Add per-task/process monitoring to vpa_pmu driver
powerpc/kvm: Add vpa latency counters to kvm_vcpu_arch
docs: ABI: sysfs-bus-event_source-devices-vpa-pmu: Document sysfs event format entries for vpa_pmu
powerpc/perf: Add perf interface to expose vpa counters
MAINTAINERS: powerpc: Mark Maddy as "M"
powerpc/Makefile: Allow overriding CPP
powerpc-km82xx.c: replace of_node_put() with __free
ps3: Correct some typos in comments
powerpc/kexec: Fix return of uninitialized variable
macintosh: Use common error handling code in via_pmu_led_init()
powerpc/powermac: Use of_property_match_string() in pmac_has_backlight_type()
powerpc: remove dead config options for MPC85xx platform support
powerpc/xive: Use cpumask_intersects()
selftests/powerpc: Remove the path after initialization.
powerpc/xmon: symbol lookup length fixed
powerpc/ep8248e: Use %pa to format resource_size_t
powerpc/ps3: Reorganize kerneldoc parameter names
KVM: PPC: Book3S HV: Fix kmv -> kvm typo
powerpc/sstep: make emulate_vsx_load and emulate_vsx_store static
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection
algorithm. This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping
code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of
shadow entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in
the hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page
into small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to
do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio
size rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON
splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel
Butt removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations"
from Mike Rapoport teaches x86 to use large pages for
read-only-execute module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in
tests over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a
single VMA, rather than requiring that multiple VMAs be created for
this. Improved efficiencies for userspace memory allocators are
expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP
from the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep
is enabled.
* tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (215 commits)
cma: enforce non-zero pageblock_order during cma_init_reserved_mem()
mm/kfence: add a new kunit test test_use_after_free_read_nofault()
zram: fix NULL pointer in comp_algorithm_show()
memcg/hugetlb: add hugeTLB counters to memcg
vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event
mm: mmap_lock: check trace_mmap_lock_$type_enabled() instead of regcount
zram: ZRAM_DEF_COMP should depend on ZRAM
MAINTAINERS/MEMORY MANAGEMENT: add document files for mm
Docs/mm/damon: recommend academic papers to read and/or cite
mm: define general function pXd_init()
kmemleak: iommu/iova: fix transient kmemleak false positive
mm/list_lru: simplify the list_lru walk callback function
mm/list_lru: split the lock to per-cgroup scope
mm/list_lru: simplify reparenting and initial allocation
mm/list_lru: code clean up for reparenting
mm/list_lru: don't export list_lru_add
mm/list_lru: don't pass unnecessary key parameters
kasan: add kunit tests for kmalloc_track_caller, kmalloc_node_track_caller
kasan: change kasan_atomics kunit test as KUNIT_CASE_SLOW
kasan: use EXPORT_SYMBOL_IF_KUNIT to export symbols
...
|
|
Negative temperatures are reported as large positive temperatures
due to missing sign extension from unsigned int to long. Cast unsigned
raw register values to signed before performing the calculations
to fix the problem.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: fff7b8ab2255 ("hwmon: add Texas Instruments TPS23861 driver")
Signed-off-by: Murad Masimov <m.masimov@maxima.ru>
Message-ID: <20241121173604.2021-1-m.masimov@maxima.ru>
[groeck: Updated subject and description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
I3C device probe fails when CONFIG_REGMAP_I3C=m:
p3t1085_i3c 0-23615290090: error -ENODEV: Failed to register i3c regmap
Fix this by using the IS_ENABLED(CONFIG_REGMAP_I3C) macro in the code.
Fixes: c40655e33106 ("hwmon: (tmp108) Add support for I3C device")
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Message-ID: <20241121121819.393104-1-jarkko.nikula@linux.intel.com>
[groeck: Remove #ifdef entirely; it is not needed due to dead code elimination]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Pull rdma updates from Jason Gunthorpe:
"Seveal fixes scattered across the drivers and a few new features:
- Minor updates and bug fixes to hfi1, efa, iopob, bnxt, hns
- Force disassociate the userspace FD when hns does an async reset
- bnxt new features for optimized modify QP to skip certain stayes,
CQ coalescing, better debug dumping
- mlx5 new data placement ordering feature
- Faster destruction of mlx5 devx HW objects
- Improvements to RDMA CM mad handling"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (51 commits)
RDMA/bnxt_re: Correct the sequence of device suspend
RDMA/bnxt_re: Use the default mode of congestion control
RDMA/bnxt_re: Support different traffic class
IB/cm: Rework sending DREQ when destroying a cm_id
IB/cm: Do not hold reference on cm_id unless needed
IB/cm: Explicitly mark if a response MAD is a retransmission
RDMA/mlx5: Move events notifier registration to be after device registration
RDMA/bnxt_re: Cache MSIx info to a local structure
RDMA/bnxt_re: Refurbish CQ to NQ hash calculation
RDMA/bnxt_re: Refactor NQ allocation
RDMA/bnxt_re: Fail probe early when not enough MSI-x vectors are reserved
RDMA/hns: Fix different dgids mapping to the same dip_idx
RDMA/bnxt_re: Add set_func_resources support for P5/P7 adapters
RDMA/bnxt_re: Enhance RoCE SRIOV resource configuration design
bnxt_en: Add support for RoCE sriov configuration
RDMA/hns: Fix NULL pointer derefernce in hns_roce_map_mr_sg()
RDMA/hns: Fix out-of-order issue of requester when setting FENCE
RDMA/nldev: Add IB device and net device rename events
RDMA/mlx5: Add implementation for ufile_hw_cleanup device operation
RDMA/core: Move ib_uverbs_file struct to uverbs_types.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core Updates:
- Convert call-sites using iommu_domain_alloc() to more specific
versions and remove function
- Introduce iommu_paging_domain_alloc_flags()
- Extend support for allocating PASID-capable domains to more drivers
- Remove iommu_present()
- Some smaller improvements
New IOMMU driver for RISC-V
Intel VT-d Updates:
- Add domain_alloc_paging support
- Enable user space IOPFs in non-PASID and non-svm cases
- Small code refactoring and cleanups
- Add domain replacement support for pasid
AMD-Vi Updates:
- Adapt to iommu_paging_domain_alloc_flags() interface and alloc V2
page-tables by default
- Replace custom domain ID allocator with IDA allocator
- Add ops->release_domain() support
- Other improvements to device attach and domain allocation code
paths
ARM-SMMU Updates:
- SMMUv2:
- Return -EPROBE_DEFER for client devices probing before their
SMMU
- Devicetree binding updates for Qualcomm MMU-500 implementations
- SMMUv3:
- Minor fixes and cleanup for NVIDIA's virtual command queue
driver
- IO-PGTable:
- Fix indexing of concatenated PGDs and extend selftest coverage
- Remove unused block-splitting support
S390 IOMMU:
- Implement support for blocking domain
Mediatek IOMMU:
- Enable 35-bit physical address support for mt8186
OMAP IOMMU driver:
- Adapt to recent IOMMU core changes and unbreak driver"
* tag 'iommu-updates-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (92 commits)
iommu/tegra241-cmdqv: Fix alignment failure at max_n_shift
iommu: Make set_dev_pasid op support domain replacement
iommu/arm-smmu-v3: Make set_dev_pasid() op support replace
iommu/vt-d: Add set_dev_pasid callback for nested domain
iommu/vt-d: Make identity_domain_set_dev_pasid() to handle domain replacement
iommu/vt-d: Make intel_svm_set_dev_pasid() support domain replacement
iommu/vt-d: Limit intel_iommu_set_dev_pasid() for paging domain
iommu/vt-d: Make intel_iommu_set_dev_pasid() to handle domain replacement
iommu/vt-d: Add iommu_domain_did() to get did
iommu/vt-d: Consolidate the struct dev_pasid_info add/remove
iommu/vt-d: Add pasid replace helpers
iommu/vt-d: Refactor the pasid setup helpers
iommu/vt-d: Add a helper to flush cache for updating present pasid entry
iommu: Pass old domain to set_dev_pasid op
iommu/iova: Fix typo 'adderss'
iommu: Add a kdoc to iommu_unmap()
iommu/io-pgtable-arm-v7s: Remove split on unmap behavior
iommu/io-pgtable-arm: Remove split on unmap behavior
iommu/vt-d: Drain PRQs when domain removed from RID
iommu/vt-d: Drop pasid requirement for prq initialization
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These update a few thermal drivers used on ARM platforms and thermal
tools:
- Add SAR2130P compatible to DT bindings in the QCom Tsens driver
(Dmitry Baryshkov)
- Add static annotation to arrays describing platform sensors in the
LVTS Mediatek driver (Colin Ian King)
- Switch back to struct platform_driver::remove() from the previous
callbacks prototype rework (Uwe Kleine-König)
- Add MSM8937 compatible to DT bindings and its support in the QCom
Tsens driver (Barnabás Czémán)
- Remove a pointless sign test on an unsigned value in
k3_bgp_read_temp() in the k3_j72xx_bandgap driver (Rex Nie)
- Fix a pointer reference loss when realloc() fails in the thermal
library (Zhang Jiao)"
* tag 'thermal-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools/thermal: Fix common realloc mistake
thermal/drivers/k3_j72xx_bandgap: Simplify code in k3_bgp_read_temp()
thermal/drivers/qcom/tsens-v1: Add support for MSM8937 tsens
dt-bindings: thermal: tsens: Add MSM8937
thermal: Switch back to struct platform_driver::remove()
thermal/drivers/mediatek/lvts_thermal: Make read-only arrays static const
dt-bindings: thermal: qcom-tsens: Add SAR2130P compatible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These mostly are updates of cpufreq drivers used on ARM platforms plus
one new DT-based cpufreq driver for virtualized guests and two cpuidle
changes that should not make any difference on systems currently in
the field, but will be needed for future development:
- Add virtual cpufreq driver for guest kernels (David Dai)
- Minor cleanup to various cpufreq drivers (Andy Shevchenko, Dhruva
Gole, Jie Zhan, Jinjie Ruan, Shuosheng Huang, Sibi Sankar, and Yuan
Can)
- Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check"
(Colin Ian King)
- Improve DT bindings for qcom-hw driver (Dmitry Baryshkov, Konrad
Dybcio, and Nikunj Kela)
- Make cpuidle_play_dead() try all idle states with :enter_dead()
callbacks and change their return type to void (Rafael Wysocki)"
* tag 'pm-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits)
cpuidle: Change :enter_dead() driver callback return type to void
cpuidle: Do not return from cpuidle_play_dead() on callback failures
arm64: dts: qcom: sc8180x: Add a SoC-specific compatible to cpufreq-hw
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SC8180X compatible
cpufreq: sun50i: add a100 cpufreq support
cpufreq: mediatek-hw: Fix wrong return value in mtk_cpufreq_get_cpu_power()
cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_power()
cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_cost()
cpufreq: loongson3: Check for error code from devm_mutex_init() call
cpufreq: scmi: Fix cleanup path when boost enablement fails
cpufreq: CPPC: Fix possible null-ptr-deref for cppc_get_cpu_cost()
cpufreq: CPPC: Fix possible null-ptr-deref for cpufreq_cpu_get_raw()
Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check"
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SAR2130P compatible
cpufreq: add virtual-cpufreq driver
dt-bindings: cpufreq: add virtual cpufreq device
cpufreq: loongson2: Unregister platform_driver on failure
cpufreq: ti-cpufreq: Remove revision offsets in AM62 family
cpufreq: ti-cpufreq: Allow backward compatibility for efuse syscon
cppc_cpufreq: Remove HiSilicon CPPC workaround
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull TPM updates from Jarkko Sakkinen:
"Only some minor tweaks"
* tag 'tpmdd-next-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: atmel: Drop PPC64 specific MMIO setup
char: tpm: cr50: Add new device/vendor ID 0x50666666
char: tpm: cr50: Move i2c locking to request/relinquish locality ops
char: tpm: cr50: Use generic request/relinquish locality ops
tpm: ibmvtpm: Set TPM_OPS_AUTO_STARTUP flag on driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD device changes:
- switch platform_driver back to remove()
- misc fixes
SPI-NAND changes:
- a load of fixes to Winbond manufacturer driver
- structure constification
Raw NAND changes:
- improve the power management of the GPMI driver
- Davinci driver clean-ups
- fix leak in the Atmel driver
- fix some typos in the core
SPI NOR changes:
- Introduce byte swap support for 8D-8D-8D mode and a user for it:
macronix.
SPI NOR flashes may swap the bytes on a 16-bit boundary when
configured in Octal DTR mode. For such cases the byte order is
propagated through SPI MEM to the SPI controllers so that the
controllers swap the bytes back at runtime. This avoids breaking
the boot sequence because of the endianness problems that appear
when the bootloaders use 1-1-1 and the kernel uses 8D-8D-8D with
byte swap support. Along with the SPI MEM byte swap support we
queue a patch for the SPI MXIC controller that swaps the bytes back
at runtime"
* tag 'mtd/for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (25 commits)
mtd: spi-nor: core: replace dummy buswidth from addr to data
mtd: spi-nor: winbond: add "w/ and w/o SFDP" comment
mtd: spi-nor: spansion: Use nor->addr_nbytes in octal DTR mode in RD_ANY_REG_OP
mtd: Switch back to struct platform_driver::remove()
mtd: cfi_cmdset_0002: remove redundant assignment to variable ret
mtd: spinand: Constify struct nand_ecc_engine_ops
MAINTAINERS: add mailing list for GPMI NAND driver
mtd: spinand: winbond: Sort the devices
mtd: spinand: winbond: Ignore the last ID characters
mtd: spinand: winbond: Fix 512GW, 01GW, 01JW and 02JW ECC information
mtd: spinand: winbond: Fix 512GW and 02JW OOB layout
mtd: nand: raw: gpmi: improve power management handling
mtd: nand: raw: gpmi: switch to SYSTEM_SLEEP_PM_OPS
mtd: rawnand: davinci: use generic device property helpers
mtd: rawnand: davinci: break the line correctly
mtd: rawnand: davinci: order headers alphabetically
mtd: rawnand: atmel: Fix possible memory leak
mtd: rawnand: Correct multiple typos in comments
mtd: hyperbus: rpc-if: Add missing MODULE_DEVICE_TABLE
mtd: spi-nor: add support for Macronix Octal flash
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core framework gained a clk provider helper, a clk consumer
helper, and some unit tests for the assigned clk rates feature in
DeviceTree. On the vendor driver side, we gained a whole pile of SoC
driver support detailed below. The majority in the diffstat is
Qualcomm, but there's also quite a few Samsung and Mediatek clk driver
additions in here as well. The top vendors is quite common, but the
sheer amount of new drivers is uncommon, so I'm anticipating a larger
number of fixes for clk drivers this cycle.
Core:
- devm_clk_bulk_get_all_enabled() to return number of clks acquired
- devm_clk_hw_register_gate_parent_hw() helper to modernize drivers
- KUnit tests for clk-assigned-rates{,-u64}
New Drivers:
- Marvell PXA1908 SoC clks
- Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver
- TWL6030 clk driver
- Nuvoton Arbel BMC NPCM8XX SoC clks
- MediaTek MT6735 SoC clks
- MediaTek MT7620, MT7628 and MT7688 MMC clks
- Add a driver for gated fixed rate clocks
- Global clock controllers for Qualcomm QCS8300 and IPQ5424 SoCs
- Camera, display and video clock controllers for Qualcomm SA8775P
SoCs
- Global, display, GPU, TCSR, and RPMh clock controllers for Qualcomm
SAR2130P
- Global, camera, display, GPU, and video clock controllers for
Qualcomm SM8475 SoCs
- RTC power domain and Battery Backup Function (VBATTB) clock support
for the Renesas RZ/G3S SoC
- Qualcomm IPQ9574 alpha PLLs
- Support for i.MX91 CCM in the i.MX93 driver
- Microchip LAN969X SoC clks
- Cortex-A55 core clocks and Interrupt Control Unit (ICU) clock and
reset on Renesas RZ/V2H(P)
- Samsung ExynosAutov920 clk drivers for PERIC1, MISC, HSI0 and HSI1
- Samsung Exynos8895 clk drivers for FSYS0/1, PERIC0/1, PERIS and TOP
Updates:
- Convert more clk bindings to YAML
- Various clk driver cleanups: NULL checks, add const, etc.
- Remove END/NUM #defines that count number of clks in various
binding headers
- Continue moving reset drivers to drivers/reset via auxiliary bus"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (162 commits)
clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access
clk: Fix invalid execution of clk_set_rate
clk: clk-loongson2: Fix memory corruption bug in struct loongson2_clk_provider
clk: lan966x: make it selectable for ARCH_LAN969X
clk: eyeq: add EyeQ6H west fixed factor clocks
clk: eyeq: add EyeQ6H central fixed factor clocks
clk: eyeq: add EyeQ5 fixed factor clocks
clk: eyeq: add fixed factor clocks infrastructure
clk: eyeq: require clock index with phandle in all cases
clk: fixed-factor: add clk_hw_register_fixed_factor_index() function
dt-bindings: clock: eyeq: add more Mobileye EyeQ5/EyeQ6H clocks
dt-bindings: soc: mobileye: set `#clock-cells = <1>` for all compatibles
clk: clk-axi-clkgen: make sure to enable the AXI bus clock
dt-bindings: clock: axi-clkgen: include AXI clk
clk: mmp: Add Marvell PXA1908 MPMU driver
clk: mmp: Add Marvell PXA1908 APMU driver
clk: mmp: Add Marvell PXA1908 APBCP driver
clk: mmp: Add Marvell PXA1908 APBC driver
dt-bindings: clock: Add Marvell PXA1908 clock bindings
clk: mmp: Switch to use struct u32_fract instead of custom one
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
- Improve handling of LCD power states and interactions with the fbdev
subsystem
- Introduce new LCD_POWER_ constants to decouple the LCD subsystem from
fbdev
- Update several drivers to use the new LCD_POWER_ constants
- Clarify the semantics of the lcd_ops.controls_device callback
- Remove unnecessary includes and dependencies
- Remove unused notifier functionality
- Simplify code with scoped for-each loops
- Fix module autoloading for the ktz8866 driver
- Update device tree bindings to yaml format
- Minor cleanups and improvements in various drivers
* tag 'backlight-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (33 commits)
MAINTAINERS: Use Daniel Thompson's korg address for Backlight work
dt-bindings: backlight: Convert zii,rave-sp-backlight.txt to yaml
backlight: Remove notifier
backlight: ktz8866: Fix module autoloading
backlight: 88pm860x_bl: Simplify with scoped for each OF child loop
backlight: lcd: Do not include <linux/fb.h> in lcd header
backlight: lcd: Remove struct fb_videomode from set_mode callback
backlight: lcd: Replace check_fb with controls_device
HID: picoLCD: Replace check_fb in favor of struct fb_info.lcd_dev
fbdev: omap: Use lcd power constants
fbdev: imxfb: Use lcd power constants
fbdev: imxfb: Replace check_fb in favor of struct fb_info.lcd_dev
fbdev: clps711x-fb: Use lcd power constants
fbdev: clps711x-fb: Replace check_fb in favor of struct fb_info.lcd_dev
backlight: tdo24m: Use lcd power constants
backlight: platform_lcd: Use lcd power constants
backlight: platform_lcd: Remove match_fb from struct plat_lcd_data
backlight: platform_lcd: Remove include statement for <linux/backlight.h>
backlight: otm3225a: Use lcd power constants
backlight: ltv350qv: Use lcd power constants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
PULL LED updates from Lee Jones:
- Remove unused local header files from various drivers
- Revert platform driver removal to the original method for consistency
- Introduce ordered workqueues for LED events, replacing the less
efficient system_wq
- Switch to a safer iteration macro in several drivers to prevent
potential memory leaks
- Fix a refcounting bug in the mt6360 flash LED driver
- Fix an uninitialized variable in the mt6370_mc_pattern_clear()
function
- Resolve Smatch warnings in the leds-bcm6328 driver
- Address a potential NULL pointer dereference in the brightness_show()
function
- Fix an incorrect format specifier in the ss4200 driver
- Prevent a resource leak in the max5970 driver's probe function
- Add support for specifying the number of serial shift bits in the
device tree for the BCM63138 family
- Implement multicolor brightness control in the lp5562 driver
- Add a device tree property to override the default LED pin polarity
- Add a property to specify the default brightness value when the LED
is initially on
- Set missing timing properties for the ktd2692 driver
- Document the "rc-feedback" trigger for controlling LEDs based on
remote control activity
- Convert text bindings to YAML for the pca955x driver to enable device
tree validation
- Remove redundant checks for invalid channel numbers in the lp55xx
driver
- Update the MAINTAINERS file with current contact information
* tag 'leds-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (46 commits)
leds: ss4200: Fix the wrong format specifier for 'blinking'
leds: pwm: Add optional DT property default-brightness
dt-bindings: leds: pwm: Add default-brightness property
leds: class: Protect brightness_show() with led_cdev->led_access mutex
leds: ktd2692: Set missing timing properties
leds: max5970: Fix unreleased fwnode_handle in probe function
leds: Introduce ordered workqueue for LEDs events instead of system_wq
MAINTAINERS: Replace Siemens IPC related bouncing maintainers
leds: bcm6328: Replace divide condition with comparison for shift value
leds: lp55xx: Remove redundant test for invalid channel number
dt-bindings: leds: pca955x: Convert text bindings to YAML
leds: rgb: leds-mt6370-rgb: Fix uninitialized variable 'ret' in mt6370_mc_pattern_clear
leds: lp5562: Add multicolor brightness control
dt-bindings: leds: Add 'active-high' property
leds: Switch back to struct platform_driver::remove()
leds: bcm63138: Add some register defines
leds: bcm63138: Handle shift register config
leds: bcm63138: Use scopes and guards
dt-bindings: leds: bcm63138: Add shift register bits
leds: leds-gpio-register: Reorganize kerneldoc parameter names
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
- Several drivers, including atmel-flexcom/rk8xx-core, palmas, and
tps65010, have undergone minor code improvements to enhance
consistency and fix race conditions.
- The syscon driver now utilizes the regmap max_register_is_0
capability for consistent register map configuration across syscons
of all sizes.
- New device support has been added for QCS8300, qcs615, SA8255p, and
samsung,s2dos05, expanding the range of compatible hardware.
- The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
and avoids loading the charger with UCSI, streamlining functionality.
- The bd96801 driver now utilizes the more modern maple tree register
cache, improving performance.
- The da9052-spi driver has undergone a fix to change the read-mask to
write-mask, preventing potential issues.
- Unused declarations in max77693 have been removed, and support for
samsung,s2dos05 has been added, enhancing code clarity and device
compatibility.
- Error handling in cs42l43 has been fixed to avoid unbalanced
regulator put and ensure proper synchronization during driver
removal.
- The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
MODULE_ALIAS(), improving code consistency.
- Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
and reorganized for better clarity and maintainability.
- The intel_soc_pmic_bxtwc driver has undergone significant
improvements, including the use of IRQ domains for various devices,
fixing IRQ domain names duplication, and code refactoring for better
consistency and maintainability.
- The ipaq-micro driver has received a fix for a missing break
statement in the default case, enhancing code robustness.
- Support for the AXP323 PMIC has been added to the axp20x driver,
along with ensuring a clear relationship between IDs and model names,
and allowing multiple regulators, broadening hardware compatibility.
- The cs42l43 driver now disables IRQs during suspend for improved
power management.
- The adp5585 driver has reduced its dependencies by dropping the
obsolete dependency on COMPILE_TEST.
- Initial support for the MT6328 PMIC has been added to the mt6397
driver, expanding the range of supported hardware.
- The rtc-bd70528 driver has been simplified by dropping the IC name
from IRQ, improving code readability.
- Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
updated to enhance clarity and incorporate new features.
- The rt5033 driver has received a fix for a missing
regmap_del_irq_chip() in the error handling path.
- New device support has been added for MSM8917, and the
intel_soc_pmic_crc driver now supports non-ACPI instantiated
i2c_client.
- The 88pm886 driver has added support for the RTC cell, and the tqmx86
driver has improved its GPIO IRQ setup and added I2C IRQ support,
increasing functionality.
- The sprd,sc2731 DT schema has been updated and converted to YAML
format for better readability and maintainability.
* tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits)
dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm
dt-bindings: mfd: sprd,sc2731: Convert to YAML
mfd: tqmx86: Add I2C IRQ support
mfd: tqmx86: Make IRQ setup errors non-fatal
mfd: tqmx86: Refactor GPIO IRQ setup
mfd: tqmx86: Improve gpio_irq module parameter description
mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S
mfd: 88pm886: Add the RTC cell
dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client
mfd: intel_soc_pmic_*: Consistently use filename as driver name
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917
mfd: rt5033: Fix missing regmap_del_irq_chip()
mfd: cgbc-core: Fix error handling paths in cgbc_init_device()
dt-bindings: mfd: aspeed: Support for AST2700
mfd: Switch back to struct platform_driver::remove()
dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750
mfd: rtc: bd7xxxx Drop IC name from IRQ
mfd: mt6397: Add initial support for MT6328
mfd: adp5585: Drop obsolete dependency on COMPILE_TEST
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dave Jiang:
- Constify range_contains() input parameters to prevent changes
- Add support for displaying RCD capabilities in sysfs to support lspci
for CXL device
- Downgrade warning message to debug in cxl_probe_component_regs()
- Add support for adding a printf specifier '%pra' to emit 'struct
range' content:
- Add sanity tests for 'struct resource'
- Add documentation for special case
- Add %pra for 'struct range'
- Add %pra usage in CXL code
- Add preparation code for DCD support:
- Add range_overlaps()
- Add CDAT DSMAS table shared and read only flag in ACPICA
- Add documentation to 'struct dev_dax_range'
- Delay event buffer allocation in CXL PCI code until needed
- Use guard() in cxl_dpa_set_mode()
- Refactor create region code to consolidate common code
* tag 'cxl-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region: Refactor common create region code
cxl/hdm: Use guard() in cxl_dpa_set_mode()
cxl/pci: Delay event buffer allocation
dax: Document struct dev_dax_range
ACPI/CDAT: Add CDAT/DSMAS shared and read only flag values
range: Add range_overlaps()
cxl/cdat: Use %pra for dpa range outputs
printf: Add print format (%pra) for struct range
Documentation/printf: struct resource add start == end special case
test printf: Add very basic struct resource tests
cxl: downgrade a warning message to debug level in cxl_probe_component_regs()
cxl/pci: Add sysfs attribute for CXL 1.1 device link status
cxl/core/regs: Add rcd_pcie_cap initialization
kernel/range: Const-ify range_contains parameters
|
|
To avoid arch-specific code in general ACPI initialization flow,
introduce a weak symbol acpi_arch_init().
Currently, arm64 and riscv can utillize this to insert their
arch-specific flow.
In the future, other architectures can also have a chance to define
their own arch-specific ACPI initialization process if necessary.
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Link: https://patch.msgid.link/20241121-intro-acpi-arch-init-v4-1-b1fb517e7d8b@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge additional cpuidle changes for 6.13-rc1:
- Make cpuidle_play_dead() try all idle states with :enter_dead()
callbacks and change their return type to void (Rafael Wysocki).
* pm-cpuidle:
cpuidle: Change :enter_dead() driver callback return type to void
cpuidle: Do not return from cpuidle_play_dead() on callback failures
|
|
The Asus entries in the acpi_quirk_skip_dmi_ids[] table are the only
entries without a comment which model they apply to. Add these comments.
The Asus TF103C entry also is in the wrong place for what is supposed to
be an alphabetically sorted list. Move it up so that the list is properly
sorted and add a comment that the list is alphabetically sorted.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241116095825.11660-2-hdegoede@redhat.com
[ rjw: Changelog and subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Acer Iconia One 8 A1-840 (not to be confused with the A1-840FHD which
is a different model) ships with Android 4.4 as factory OS and has the
usual broken DSDT issues for x86 Android tablets.
Add quirks to skip ACPI I2C client enumeration and disable ACPI battery/AC
and ACPI GPIO event handlers.
Also add the "INT33F5" HID for the TI PMIC used on this tablet to the list
of HIDs for which not to skip i2c_client instantiation, since we do want
an ACPI instantiated i2c_client for the PMIC.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241116095825.11660-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Now that the main domain allocating path is calling this function it
doesn't make sense to leave it named _user. Change the name to
alloc_paging_flags() to mirror the new iommu_paging_domain_alloc_flags()
function.
A driver should implement only one of ops->domain_alloc_paging() or
ops->domain_alloc_paging_flags(). The former is a simpler interface with
less boiler plate that the majority of drivers use. The latter is for
drivers with a greater feature set (PASID, multiple page table support,
advanced iommufd support, nesting, etc). Additional patches will be needed
to achieve this.
Link: https://patch.msgid.link/r/2-v1-c252ebdeb57b+329-iommu_paging_flags_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
It turns out all the drivers that are using this immediately call into
another function, so just make that function directly into the op. This
makes paging=NULL for domain_alloc_user and we can remove the argument in
the next patch.
The function mirrors the similar op in the viommu that allocates a nested
domain on top of the viommu's nesting parent. This version supports cases
where a viommu is not being used.
Link: https://patch.msgid.link/r/1-v1-c252ebdeb57b+329-iommu_paging_flags_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/iommu/linux into iommufd.git
Merge with Joerg's tree for dependencies on the next patches.
======================================
IOMMU Updates for Linux v6.13:
Including:
- Core Updates:
- Convert call-sites using iommu_domain_alloc() to more specific
versions and remove function.
- Introduce iommu_paging_domain_alloc_flags().
- Extend support for allocating PASID-capable domains to more
drivers.
- Remove iommu_present().
- Some smaller improvements.
- New IOMMU driver for RISC-V.
- Intel VT-d Updates:
- Add domain_alloc_paging support.
- Enable user space IOPFs in non-PASID and non-svm cases.
- Small code refactoring and cleanups.
- Add domain replacement support for pasid.
- AMD-Vi Updates:
- Adapt to iommu_paging_domain_alloc_flags() interface and alloc V2
page-tables by default.
- Replace custom domain ID allocator with IDA allocator.
- Add ops->release_domain() support.
- Other improvements to device attach and domain allocation code
paths.
- ARM-SMMU Updates:
- SMMUv2:
- Return -EPROBE_DEFER for client devices probing before their SMMU.
- Devicetree binding updates for Qualcomm MMU-500 implementations.
- SMMUv3:
- Minor fixes and cleanup for NVIDIA's virtual command queue driver.
- IO-PGTable:
- Fix indexing of concatenated PGDs and extend selftest coverage.
- Remove unused block-splitting support.
- S390 IOMMU:
- Implement support for blocking domain.
- Mediatek IOMMU:
- Enable 35-bit physical address support for mt8186.
- OMAP IOMMU driver:
- Adapt to recent IOMMU core changes and unbreak driver.
======================================
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Using device name as format string of seq_printf() is proned to
"Format string attack", opens possibility for exploitation.
Seq_puts() is safer and more efficient.
Signed-off-by: David Wang <00107082@163.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20241120053055.225195-1-00107082@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
This is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/2ce706d3242b9d3e4b9c20c0a7d9a8afcf8897ec.1729423829.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Dividing a 64-bit integer prevents building this for 32-bit targets:
ERROR: modpost: "__aeabi_uldivmod" [drivers/gpu/drm/rockchip/rockchipdrm.ko] undefined!
As this function is not performance criticial, just Use the div_u64() helper.
Fixes: 128a9bf8ace2 ("drm/rockchip: Add basic RK3588 HDMI output support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20241018151016.3496613-1-arnd@kernel.org
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
(cherry picked from commit 4b64b4a81fcd51f570c046cf904aef19ec756d45)
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The PPC64 specific MMIO setup open codes DT address functions rather
than using standard address parsing functions. The open-coded version
fails to handle any address translation and is not endian safe.
I haven't found any evidence of what platform used this. The only thing
that turned up was a PPC405 platform, but that is 32-bit and PPC405
support is being removed as well. CONFIG_TCG_ATMEL is not enabled for
any powerpc config and never was. The support was added in 2005 and
hasn't been touched since.
Rather than try to modernize and fix this code, just remove it.
[jarkko: fixed couple of style issues reported by checkpatch.pl --strict
and put offset into parentheses in the macro declarations.]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Pull drm updates from Dave Airlie:
"There's a lot of rework, the panic helper support is being added to
more drivers, v3d gets support for HW superpages, scheduler
documentation, drm client and video aperture reworks, some new
MAINTAINERS added, amdgpu has the usual lots of IP refactors, Intel
has some Pantherlake enablement and xe is getting some SRIOV bits, but
just lots of stuff everywhere.
core:
- split DSC helpers from DP helpers
- clang build fixes for drm/mm test
- drop simple pipeline support for gem vram
- document submission error signaling
- move drm_rect to drm core module from kms helper
- add default client setup to most drivers
- move to video aperture helpers instead of drm ones
tests:
- new framebuffer tests
ttm:
- remove swapped and pinned BOs from TTM lru
panic:
- fix uninit spinlock
- add ABGR2101010 support
bridge:
- add TI TDP158 support
- use standard PM OPS
dma-fence:
- use read_trylock instead of read_lock to help lockdep
scheduler:
- add errno to sched start to report different errors
- add locking to drm_sched_entity_modify_sched
- improve documentation
xe:
- add drm_line_printer
- lots of refactoring
- Enable Xe2 + PES disaggregation
- add new ARL PCI ID
- SRIOV development work
- fix exec unnecessary implicit fence
- define and parse OA sync props
- forcewake refactoring
i915:
- Enable BMG/LNL ultra joiner
- Enable 10bpx + CCS scanout on ICL+, fp16/CCS on TGL+
- use DSB for plane/color mgmt
- Arrow lake PCI IDs
- lots of i915/xe display refactoring
- enable PXP GuC autoteardown
- Pantherlake (PTL) Xe3 LPD display enablement
- Allow fastset HDR infoframe changes
- write DP source OUI for non-eDP sinks
- share PCI IDs between i915 and xe
amdgpu:
- SDMA queue reset support
- SMU 13.0.6, JPEG 4.0.3 updates
- Initial runtime repartitioning support
- rework IP structs for multiple IP instances
- Fetch EDID from _DDC if available
- SMU13 zero rpm user control
- lots of fixes/cleanups
amdkfd:
- Increase event FIFO size
- add topology cap flag for per queue reset
msm:
- DPU:
- SA8775P support
- (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support
- Enable large framebuffer support
- Drop MSM8998 and SDM845
- DP:
- SA8775P support
- GPU:
- a7xx preemption support
- Adreno A663 support
ast:
- warn about unsupported TX chips
ivpu:
- add coredump
- add pantherlake support
rockchip:
- 4K@60Hz display enablement
- generate pll programming tables
panthor:
- add timestamp query API
- add realtime group priority
- add fdinfo support
etnaviv:
- improve handling of DMA address limits
- improve GPU hangcheck
exynos:
- Decon Exynos7870 support
mediatek:
- add OF graph support
omap:
- locking fixes
bochs:
- convert to gem/shmem from simpledrm
v3d:
- support big/super pages
- add gemfs
vc4:
- BCM2712 support refactoring
- add YUV444 format support
udmabuf:
- folio related fixes
nouveau:
- add panic support on nv50+"
* tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel: (1583 commits)
drm/xe/guc: Fix dereference before NULL check
drm/amd: Fix initialization mistake for NBIO 7.7.0
Revert "drm/amd/display: parse umc_info or vram_info based on ASIC"
drm/amd/display: Fix failure to read vram info due to static BP_RESULT
drm/amdgpu: enable GTT fallback handling for dGPUs only
drm/amd/amdgpu: limit single process inside MES
drm/fourcc: add AMD_FMT_MOD_TILE_GFX9_4K_D_X
drm/amdgpu/mes12: correct kiq unmap latency
drm/amdgpu: Support vcn and jpeg error info parsing
drm/amd : Update MES API header file for v11 & v12
drm/amd/amdkfd: add/remove kfd queues on start/stop KFD scheduling
drm/amdkfd: change kfd process kref count at creation
drm/amdgpu: Cleanup shift coding style
drm/amd/amdgpu: Increase MES log buffer to dump mes scratch data
drm/amdgpu: Implement virt req_ras_err_count
drm/amdgpu: VF Query RAS Caps from Host if supported
drm/amdgpu: Add msg handlers for SRIOV RAS Telemetry
drm/amdgpu: Update SRIOV Exchange Headers for RAS Telemetry Support
drm/amd/display: 3.2.309
drm/amd/display: Adjust VSDB parser for replay feature
...
|
|
Accept another DID:VID for the next generation Google TPM. This TPM
has the same Ti50 firmware and fulfills the same interface.
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Move i2c locking primitives to request_locality and relinquish_locality
callbacks, what effectively blocks TPM bus for the whole duration of
logical TPM operation.
With this in place, cr50-equipped TPM may be shared with external CPUs -
assuming that underneath i2c controller driver is aware of this setup
(see i2c-designware-amdpsp as an example).
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Instead of using static functions tpm_cr50_request_locality and
tpm_cr50_release_locality register callbacks from tpm class chip->ops
created for this purpose.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Signed-off-by: Grzegorz Bernacki <bernacki@chromium.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Set the TPM_OPS_AUTO_STARTUP on the driver so that the ibmvtpm driver now
uses tpm2_auto_startup and tpm1_auto_startup like many other drivers do.
Remove tpm_get_timeouts, tpm2_get_cc_attrs_tbl, and tpm2_sessions_init
calls from it since these will all be called in tpm2_auto_startup and
tpm1_auto_startup.
The exporting of the tpm2_session_init symbol was only necessary while the
ibmvtpm driver was calling this function. Since this is not the case
anymore, remove this symbol from being exported.
What is new for the ibmvtpm driver is that now tpm2_do_selftest and
tpm1_do_selftest will be called that send commands to the TPM to perform
or continue its selftest. However, the firmware should already have sent
these commands so that the TPM will not do much work at this time.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This is a relatively calm cycle, and majority of changes are about
ASoC. There are little changes in the core side but we received lots
of new drivers for new vendors.
ALSA Core:
- The new accel operation mode for compress-offload API; only the
core part, the actual user will follow later
ASoC:
- Continued API simplification works
- Renaming of the sh directory to Renesas
- Factoring out of some of the common code for Realtek devices
- Ussal ASoC Intel SOF, AMD and SoundWire updates
- Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081,
Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307,
Longsoon I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342,
Qualcomm SM8750, RealTek RT721, and ST Microelectronics STM32MP25
HD- and USB-audio:
- Clean up of IRQ handling in legacy HD-audio driver
- Fix soft lockup at disconnection of non-standard USB drivers
- Scarlett2 mixer improvements
- New quirks and cleanups in HD- and USB-audio"
* tag 'sound-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (278 commits)
ALSA: hda: Poll jack events for LS7A HD-Audio
ASoC: hdmi-codec: reorder channel allocation list
ALSA: ump: Fix the wrong format specifier
ASoC: Intel: soc-acpi-intel-lnl-match: add rt712_vb + rt1320 support
ASoC: stm32: dfsdm: change rate upper limits
ASoC: sma1307: fix uninitialized variable refence
ASoC: dt-bindings: simple-mux: add idle-state property
ASoc: simple-mux: add idle-state support
ASoC: sdca: test adev before calling acpi_dev_for_each_child
ASoC: SOF: ipc4-topology: remove redundant assignment to variable ret
ASoC: amd: ps: fix the pcm device numbering for acp 6.3 platform
ASoC: amd: acp: add soundwire machine driver for legacy stack
ASoC: amd: acp: move get_acp63_cpu_pin_id() to common file
ASoC: amd: ps: add soundwire machines for acp6.3 platform
ASoC: amd: acp: add RT711, RT714 & RT1316 support for acp 6.3 platform
ASoC: amd: acp: add rt722 based soundwire machines
ALSA: compress_offload: Add missing descriptions in structs
ALSA: 6fire: Release resources at card release
ALSA: caiaq: Use snd_card_free_when_closed() at disconnection
ALSA: us122l: Drop mmap_count field
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Core:
- drivers can now use a GPIO as a side channel for SMBus Alerts using
a generic binding
- regular stuff like mem leak fix, Makefile maintenance...
Host improvements and refactoring:
- All controllers using the 'remove_new' callback have been reverted
to use the 'remove' callback
- Intel SCH controller underwent significant refactoring, this brings
love and a modern look to the driver
- PIIX4 driver refactored to enable usage by other drivers (e.g., AMD
ASF)
- iMX/MXC improved message handling to reduce protocol overhead:
Refactored DMA/non-DMA read/write and bus polling mechanisms to
achieve this.
- ACPI documentation for PIIX4
New host features:
- i2c-cadence support for atomic transfers
- Qualcomm CII support for a 32MHz serial engine clock
Deprecated features:
- Dropped outdated support for AMD756 S4882 and NFORCE2 S4985. If
somebody misses this, Jean will rewrite support using the proper
i2c mux framework.
New hardware IDs for existing drivers:
- Intel Panther Lake
- S32G2/S32G3 SoCs
- HJMC01 DesignWare ACPI HID
- PIC64GX to Microchip Core
- Qualcomm SDM670 to Qualcomm CCI
New drivers:
- AMD ASF
- Realtek RTL I2C Controller
at24 updates:
- add support for the lockable page on ST M24256E"
* tag 'i2c-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (59 commits)
docs: i2c: piix4: Add ACPI section
i2c: Add driver for the RTL9300 I2C controller
i2c: qcom-cci: Remove unused struct member cci_clk_rate
dt-bindings: i2c: Add Realtek RTL I2C Controller
i2c: busses: Use *-y instead of *-objs in Makefile
i2c: imx: add support for S32G2/S32G3 SoCs
dt-bindings: i2c: imx: add SoC specific compatible strings for S32G
i2c: qcom-cci: Remove the unused variable cci_clk_rate
i2c: Drop legacy muxing pseudo-drivers
i2c: imx: prevent rescheduling in non dma mode
i2c: imx: separate atomic, dma and non-dma use case
i2c: imx: do not poll for bus busy in single master mode
i2c: designware: Add a new ACPI HID for HJMC01 I2C controller
i2c: qcom-geni: Keep comment why interrupts start disabled
dt-bindings: i2c: microchip: corei2c: Add PIC64GX as compatible with driver
i2c: designware: constify abort_sources
i2c: Switch back to struct platform_driver::remove()
i2c: qcom-geni: Support systems with 32MHz serial engine clock
i2c: qcom-cci: Stop complaining about DT set clock rate
dt-bindings: i2c: qcom-cci: Document SDM670 compatible
...
|
|
This reverts commit 949658cb9b69ab9d22a42a662b2fdc7085689ed8.
This causes a blank screen on boot.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3696
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Shixiong Ou <oushixiong@kylinos.cn>
Cc: stable@vger.kernel.org
|
|
Looks like these got missed when jpeg was split from vcn.
Cancel the jpeg workers rather than vcn workers.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[ +0.000021] BUG: KASAN: slab-use-after-free in drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched]
[ +0.000027] Read of size 8 at addr ffff8881b8605f88 by task amd_pci_unplug/2147
[ +0.000023] CPU: 6 PID: 2147 Comm: amd_pci_unplug Not tainted 6.10.0+ #1
[ +0.000016] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020
[ +0.000016] Call Trace:
[ +0.000008] <TASK>
[ +0.000009] dump_stack_lvl+0x76/0xa0
[ +0.000017] print_report+0xce/0x5f0
[ +0.000017] ? drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched]
[ +0.000019] ? srso_return_thunk+0x5/0x5f
[ +0.000015] ? kasan_complete_mode_report_info+0x72/0x200
[ +0.000016] ? drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched]
[ +0.000019] kasan_report+0xbe/0x110
[ +0.000015] ? drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched]
[ +0.000023] __asan_report_load8_noabort+0x14/0x30
[ +0.000014] drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched]
[ +0.000020] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? __kasan_check_write+0x14/0x30
[ +0.000016] ? __pfx_drm_sched_entity_flush+0x10/0x10 [gpu_sched]
[ +0.000020] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? __kasan_check_write+0x14/0x30
[ +0.000013] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? enable_work+0x124/0x220
[ +0.000015] ? __pfx_enable_work+0x10/0x10
[ +0.000013] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? free_large_kmalloc+0x85/0xf0
[ +0.000016] drm_sched_entity_destroy+0x18/0x30 [gpu_sched]
[ +0.000020] amdgpu_vce_sw_fini+0x55/0x170 [amdgpu]
[ +0.000735] ? __kasan_check_read+0x11/0x20
[ +0.000016] vce_v4_0_sw_fini+0x80/0x110 [amdgpu]
[ +0.000726] amdgpu_device_fini_sw+0x331/0xfc0 [amdgpu]
[ +0.000679] ? mutex_unlock+0x80/0xe0
[ +0.000017] ? __pfx_amdgpu_device_fini_sw+0x10/0x10 [amdgpu]
[ +0.000662] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? __kasan_check_write+0x14/0x30
[ +0.000013] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? mutex_unlock+0x80/0xe0
[ +0.000016] amdgpu_driver_release_kms+0x16/0x80 [amdgpu]
[ +0.000663] drm_minor_release+0xc9/0x140 [drm]
[ +0.000081] drm_release+0x1fd/0x390 [drm]
[ +0.000082] __fput+0x36c/0xad0
[ +0.000018] __fput_sync+0x3c/0x50
[ +0.000014] __x64_sys_close+0x7d/0xe0
[ +0.000014] x64_sys_call+0x1bc6/0x2680
[ +0.000014] do_syscall_64+0x70/0x130
[ +0.000014] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? irqentry_exit_to_user_mode+0x60/0x190
[ +0.000015] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? irqentry_exit+0x43/0x50
[ +0.000012] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? exc_page_fault+0x7c/0x110
[ +0.000015] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ +0.000014] RIP: 0033:0x7ffff7b14f67
[ +0.000013] Code: ff e8 0d 16 02 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 73 ba f7 ff
[ +0.000026] RSP: 002b:00007fffffffe378 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
[ +0.000019] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffff7b14f67
[ +0.000014] RDX: 0000000000000000 RSI: 00007ffff7f6f47a RDI: 0000000000000003
[ +0.000014] RBP: 00007fffffffe3a0 R08: 0000555555569890 R09: 0000000000000000
[ +0.000014] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fffffffe5c8
[ +0.000013] R13: 00005555555552a9 R14: 0000555555557d48 R15: 00007ffff7ffd040
[ +0.000020] </TASK>
[ +0.000016] Allocated by task 383 on cpu 7 at 26.880319s:
[ +0.000014] kasan_save_stack+0x28/0x60
[ +0.000008] kasan_save_track+0x18/0x70
[ +0.000007] kasan_save_alloc_info+0x38/0x60
[ +0.000007] __kasan_kmalloc+0xc1/0xd0
[ +0.000007] kmalloc_trace_noprof+0x180/0x380
[ +0.000007] drm_sched_init+0x411/0xec0 [gpu_sched]
[ +0.000012] amdgpu_device_init+0x695f/0xa610 [amdgpu]
[ +0.000658] amdgpu_driver_load_kms+0x1a/0x120 [amdgpu]
[ +0.000662] amdgpu_pci_probe+0x361/0xf30 [amdgpu]
[ +0.000651] local_pci_probe+0xe7/0x1b0
[ +0.000009] pci_device_probe+0x248/0x890
[ +0.000008] really_probe+0x1fd/0x950
[ +0.000008] __driver_probe_device+0x307/0x410
[ +0.000007] driver_probe_device+0x4e/0x150
[ +0.000007] __driver_attach+0x223/0x510
[ +0.000006] bus_for_each_dev+0x102/0x1a0
[ +0.000007] driver_attach+0x3d/0x60
[ +0.000006] bus_add_driver+0x2ac/0x5f0
[ +0.000006] driver_register+0x13d/0x490
[ +0.000008] __pci_register_driver+0x1ee/0x2b0
[ +0.000007] llc_sap_close+0xb0/0x160 [llc]
[ +0.000009] do_one_initcall+0x9c/0x3e0
[ +0.000008] do_init_module+0x241/0x760
[ +0.000008] load_module+0x51ac/0x6c30
[ +0.000006] __do_sys_init_module+0x234/0x270
[ +0.000007] __x64_sys_init_module+0x73/0xc0
[ +0.000006] x64_sys_call+0xe3/0x2680
[ +0.000006] do_syscall_64+0x70/0x130
[ +0.000007] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ +0.000015] Freed by task 2147 on cpu 6 at 160.507651s:
[ +0.000013] kasan_save_stack+0x28/0x60
[ +0.000007] kasan_save_track+0x18/0x70
[ +0.000007] kasan_save_free_info+0x3b/0x60
[ +0.000007] poison_slab_object+0x115/0x1c0
[ +0.000007] __kasan_slab_free+0x34/0x60
[ +0.000007] kfree+0xfa/0x2f0
[ +0.000007] drm_sched_fini+0x19d/0x410 [gpu_sched]
[ +0.000012] amdgpu_fence_driver_sw_fini+0xc4/0x2f0 [amdgpu]
[ +0.000662] amdgpu_device_fini_sw+0x77/0xfc0 [amdgpu]
[ +0.000653] amdgpu_driver_release_kms+0x16/0x80 [amdgpu]
[ +0.000655] drm_minor_release+0xc9/0x140 [drm]
[ +0.000071] drm_release+0x1fd/0x390 [drm]
[ +0.000071] __fput+0x36c/0xad0
[ +0.000008] __fput_sync+0x3c/0x50
[ +0.000007] __x64_sys_close+0x7d/0xe0
[ +0.000007] x64_sys_call+0x1bc6/0x2680
[ +0.000007] do_syscall_64+0x70/0x130
[ +0.000007] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ +0.000014] The buggy address belongs to the object at ffff8881b8605f80
which belongs to the cache kmalloc-64 of size 64
[ +0.000020] The buggy address is located 8 bytes inside of
freed 64-byte region [ffff8881b8605f80, ffff8881b8605fc0)
[ +0.000028] The buggy address belongs to the physical page:
[ +0.000011] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1b8605
[ +0.000008] anon flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
[ +0.000007] page_type: 0xffffefff(slab)
[ +0.000009] raw: 0017ffffc0000000 ffff8881000428c0 0000000000000000 dead000000000001
[ +0.000006] raw: 0000000000000000 0000000000200020 00000001ffffefff 0000000000000000
[ +0.000006] page dumped because: kasan: bad access detected
[ +0.000012] Memory state around the buggy address:
[ +0.000011] ffff8881b8605e80: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ +0.000015] ffff8881b8605f00: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
[ +0.000015] >ffff8881b8605f80: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ +0.000013] ^
[ +0.000011] ffff8881b8606000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fc
[ +0.000014] ffff8881b8606080: fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb fb
[ +0.000013] ==================================================================
The issue reproduced on VG20 during the IGT pci_unplug test.
The root cause of the issue is that the function drm_sched_fini is called before drm_sched_entity_kill.
In drm_sched_fini, the drm_sched_rq structure is freed, but this structure is later accessed by
each entity within the run queue, leading to invalid memory access.
To resolve this, the order of cleanup calls is updated:
Before:
amdgpu_fence_driver_sw_fini
amdgpu_device_ip_fini
After:
amdgpu_device_ip_fini
amdgpu_fence_driver_sw_fini
This updated order ensures that all entities in the IPs are cleaned up first, followed by proper
cleanup of the schedulers.
Additional Investigation:
During debugging, another issue was identified in the amdgpu_vce_sw_fini function. The vce.vcpu_bo
buffer must be freed only as the final step in the cleanup process to prevent any premature
access during earlier cleanup stages.
v2: Using Christian suggestion call drm_sched_entity_destroy before drm_sched_fini.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
It is not necessarily corrupted. When there is RAS fatal error, device
memory access is blocked. Hence vcpu bo cannot be saved to system memory
as in a regular suspend sequence before going for reset. In other full
device reset cases, that gets saved and restored during resume.
v2: Remove redundant code like vcn_v4_0 did
v2: Refine commit message
v3: Drop the volatile
v3: Refine commit message
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix the similar warning when hotplugging:
[ 155.585721] kernfs: can not remove 'enforce_isolation', no directory
[ 155.592201] WARNING: CPU: 3 PID: 6960 at fs/kernfs/dir.c:1683 kernfs_remove_by_name_ns+0xb9/0xc0
[ 155.601145] Modules linked in: xt_MASQUERADE xt_comment nft_compat veth bridge stp llc overlay nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink qrtr intel_rapl_msr amd_atl intel_rapl_common amd64_edac edac_mce_amd amdgpu kvm_amd kvm ipmi_ssif amdxcp rapl drm_exec gpu_sched drm_buddy i2c_algo_bit drm_suballoc_helper drm_ttm_helper ttm pcspkr drm_display_helper acpi_cpufreq drm_kms_helper video wmi k10temp i2c_piix4 acpi_ipmi ipmi_si drm zram ip_tables loop squashfs dm_multipath crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sha512_ssse3 sha256_ssse3 sha1_ssse3 sp5100_tco ixgbe rfkill ccp dca sunrpc be2iscsi bnx2i cnic uio cxgb4i cxgb4 tls cxgb3i cxgb3 mdio libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_devintf ipmi_msghandler fuse
[ 155.685224] systemd-journald[1354]: Compressed data object 957 -> 524 using ZSTD
[ 155.685687] CPU: 3 PID: 6960 Comm: amd_pci_unplug Not tainted 6.10.0-1148853.1.zuul.164395107d6642bdb451071313e9378d #1
[ 155.704149] Hardware name: TYAN B8021G88V2HR-2T/S8021GM2NR-2T, BIOS V1.03.B10 04/01/2019
[ 155.712383] RIP: 0010:kernfs_remove_by_name_ns+0xb9/0xc0
[ 155.717805] Code: a0 00 48 89 ef e8 37 96 c7 ff 5b b8 fe ff ff ff 5d 41 5c 41 5d e9 f7 96 a0 00 0f 0b eb ab 48 c7 c7 48 ba 7e 8f e8 f7 66 bf ff <0f> 0b eb dc 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90
[ 155.736766] RSP: 0018:ffffb1685d7a3e20 EFLAGS: 00010296
[ 155.742108] RAX: 0000000000000038 RBX: ffff929e94c80000 RCX: 0000000000000000
[ 155.749363] RDX: ffff928e1efaf200 RSI: ffff928e1efa18c0 RDI: ffff928e1efa18c0
[ 155.756612] RBP: 0000000000000008 R08: 0000000000000000 R09: 0000000000000003
[ 155.763855] R10: ffffb1685d7a3cd8 R11: ffffffff8fb3e1c8 R12: ffffffffc1ef5341
[ 155.771104] R13: ffff929e94cc5530 R14: 0000000000000000 R15: 0000000000000000
[ 155.778357] FS: 00007fd9dd8d9c40(0000) GS:ffff928e1ef80000(0000) knlGS:0000000000000000
[ 155.786594] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 155.792450] CR2: 0000561245ceee38 CR3: 0000000113018000 CR4: 00000000003506f0
[ 155.799702] Call Trace:
[ 155.802254] <TASK>
[ 155.804460] ? __warn+0x80/0x120
[ 155.807798] ? kernfs_remove_by_name_ns+0xb9/0xc0
[ 155.812617] ? report_bug+0x164/0x190
[ 155.816393] ? handle_bug+0x3c/0x80
[ 155.819994] ? exc_invalid_op+0x17/0x70
[ 155.823939] ? asm_exc_invalid_op+0x1a/0x20
[ 155.828235] ? kernfs_remove_by_name_ns+0xb9/0xc0
[ 155.833058] amdgpu_gfx_sysfs_fini+0x59/0xd0 [amdgpu]
[ 155.838637] gfx_v9_0_sw_fini+0x123/0x1c0 [amdgpu]
[ 155.843887] amdgpu_device_fini_sw+0xbc/0x3e0 [amdgpu]
[ 155.849432] amdgpu_driver_release_kms+0x16/0x30 [amdgpu]
[ 155.855235] drm_dev_put.part.0+0x3c/0x60 [drm]
[ 155.859914] drm_release+0x8b/0xc0 [drm]
[ 155.863978] __fput+0xf1/0x2c0
[ 155.867141] __x64_sys_close+0x3c/0x80
[ 155.870998] do_syscall_64+0x64/0x170
V2: Add details in comments (Tim)
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reported-by: Andy Dong <andy.dong@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add the sysfs interface for vcn:
vcn_reset_mask
The interface is read-only and show the resets supported by the IP.
For example, full adapter reset (mode1/mode2/BACO/etc),
soft reset, queue reset, and pipe reset.
V2: the sysfs node returns a text string instead of some flags (Christian)
V2: the sysfs node returns a text string instead of some flags (Christian)
v3: add a generic helper which takes the ring as parameter
and print the strings in the order they are applied (Christian)
check amdgpu_gpu_recovery before creating sysfs file itself,
and initialize supported_reset_types in IP version files (Lijo)
v4: s/sdma/vcn/ in the reset mask setup
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The wait_for_idle signature was changed, but the callers
were not.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reported-by: Michel Dänzer <michel@daenzer.net>
Fixes: 82ae6619a450 ("drm/amdgpu: update the handle ptr in wait_for_idle")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
|
|
As per power team, there is no need to impose a lower bound on arcturus
power limit. Any unreasonable limit set will result in frequent
throttling.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
