| Age | Commit message (Collapse) | Author |
|---|
|
The pin control core header provides struct group_desc.
Utilize it instead of open coded variants in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250318105932.2090926-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Since pin control provides a generic data type and a macro for
the pin function definition, use them in the driver.
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250318105932.2090926-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The pin control header provides struct pingroup and PINCTRL_PINGROUP() macro.
Utilize them instead of open coded variants in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250318105932.2090926-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Sparse is not happy about implementation of the NPCM8XX_PINCFG()
pinctrl-npcm8xx.c:1314:9: warning: obsolete array initializer, use C99 syntax
pinctrl-npcm8xx.c:1315:9: warning: obsolete array initializer, use C99 syntax
...
pinctrl-npcm8xx.c:1412:9: warning: obsolete array initializer, use C99 syntax
pinctrl-npcm8xx.c:1413:9: warning: too many warnings
which uses index-based assignment in a wrong way, i.e. it missed
the equal sign and hence the index is simply ignored, while the
entries are indexed naturally. This is not a problem as the pin
numbering repeats the natural order, but it might be in case of
shuffling the entries. Fix this by adding missed equal sign and
reformat a bit for better readability.
Fixes: acf4884a5717 ("pinctrl: nuvoton: add NPCM8XX pinctrl and GPIO driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250318105932.2090926-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This should be >= pmx->soc->ngroups instead of > to avoid an out of
bounds access. The pmx->soc->groups[] array is allocated in
tegra_pinctrl_probe().
Fixes: c12bfa0fee65 ("pinctrl-tegra: Restore SFSEL bit when freeing pins")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Kunwu Chan <kunwu.chan@linux.dev>
Link: https://lore.kernel.org/82b40d9d-b437-42a9-9eb3-2328aa6877ac@stanley.mountain
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
'rockchip', 's390', 'core', 'intel/vt-d' and 'amd/amd-vi' into next
|
|
We have recently seen report of lockdep circular lock dependency warnings
on platforms like Skylake and Kabylake:
======================================================
WARNING: possible circular locking dependency detected
6.14.0-rc6-CI_DRM_16276-gca2c04fe76e8+ #1 Not tainted
------------------------------------------------------
swapper/0/1 is trying to acquire lock:
ffffffff8360ee48 (iommu_probe_device_lock){+.+.}-{3:3},
at: iommu_probe_device+0x1d/0x70
but task is already holding lock:
ffff888102c7efa8 (&device->physical_node_lock){+.+.}-{3:3},
at: intel_iommu_init+0xe75/0x11f0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #6 (&device->physical_node_lock){+.+.}-{3:3}:
__mutex_lock+0xb4/0xe40
mutex_lock_nested+0x1b/0x30
intel_iommu_init+0xe75/0x11f0
pci_iommu_init+0x13/0x70
do_one_initcall+0x62/0x3f0
kernel_init_freeable+0x3da/0x6a0
kernel_init+0x1b/0x200
ret_from_fork+0x44/0x70
ret_from_fork_asm+0x1a/0x30
-> #5 (dmar_global_lock){++++}-{3:3}:
down_read+0x43/0x1d0
enable_drhd_fault_handling+0x21/0x110
cpuhp_invoke_callback+0x4c6/0x870
cpuhp_issue_call+0xbf/0x1f0
__cpuhp_setup_state_cpuslocked+0x111/0x320
__cpuhp_setup_state+0xb0/0x220
irq_remap_enable_fault_handling+0x3f/0xa0
apic_intr_mode_init+0x5c/0x110
x86_late_time_init+0x24/0x40
start_kernel+0x895/0xbd0
x86_64_start_reservations+0x18/0x30
x86_64_start_kernel+0xbf/0x110
common_startup_64+0x13e/0x141
-> #4 (cpuhp_state_mutex){+.+.}-{3:3}:
__mutex_lock+0xb4/0xe40
mutex_lock_nested+0x1b/0x30
__cpuhp_setup_state_cpuslocked+0x67/0x320
__cpuhp_setup_state+0xb0/0x220
page_alloc_init_cpuhp+0x2d/0x60
mm_core_init+0x18/0x2c0
start_kernel+0x576/0xbd0
x86_64_start_reservations+0x18/0x30
x86_64_start_kernel+0xbf/0x110
common_startup_64+0x13e/0x141
-> #3 (cpu_hotplug_lock){++++}-{0:0}:
__cpuhp_state_add_instance+0x4f/0x220
iova_domain_init_rcaches+0x214/0x280
iommu_setup_dma_ops+0x1a4/0x710
iommu_device_register+0x17d/0x260
intel_iommu_init+0xda4/0x11f0
pci_iommu_init+0x13/0x70
do_one_initcall+0x62/0x3f0
kernel_init_freeable+0x3da/0x6a0
kernel_init+0x1b/0x200
ret_from_fork+0x44/0x70
ret_from_fork_asm+0x1a/0x30
-> #2 (&domain->iova_cookie->mutex){+.+.}-{3:3}:
__mutex_lock+0xb4/0xe40
mutex_lock_nested+0x1b/0x30
iommu_setup_dma_ops+0x16b/0x710
iommu_device_register+0x17d/0x260
intel_iommu_init+0xda4/0x11f0
pci_iommu_init+0x13/0x70
do_one_initcall+0x62/0x3f0
kernel_init_freeable+0x3da/0x6a0
kernel_init+0x1b/0x200
ret_from_fork+0x44/0x70
ret_from_fork_asm+0x1a/0x30
-> #1 (&group->mutex){+.+.}-{3:3}:
__mutex_lock+0xb4/0xe40
mutex_lock_nested+0x1b/0x30
__iommu_probe_device+0x24c/0x4e0
probe_iommu_group+0x2b/0x50
bus_for_each_dev+0x7d/0xe0
iommu_device_register+0xe1/0x260
intel_iommu_init+0xda4/0x11f0
pci_iommu_init+0x13/0x70
do_one_initcall+0x62/0x3f0
kernel_init_freeable+0x3da/0x6a0
kernel_init+0x1b/0x200
ret_from_fork+0x44/0x70
ret_from_fork_asm+0x1a/0x30
-> #0 (iommu_probe_device_lock){+.+.}-{3:3}:
__lock_acquire+0x1637/0x2810
lock_acquire+0xc9/0x300
__mutex_lock+0xb4/0xe40
mutex_lock_nested+0x1b/0x30
iommu_probe_device+0x1d/0x70
intel_iommu_init+0xe90/0x11f0
pci_iommu_init+0x13/0x70
do_one_initcall+0x62/0x3f0
kernel_init_freeable+0x3da/0x6a0
kernel_init+0x1b/0x200
ret_from_fork+0x44/0x70
ret_from_fork_asm+0x1a/0x30
other info that might help us debug this:
Chain exists of:
iommu_probe_device_lock --> dmar_global_lock -->
&device->physical_node_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&device->physical_node_lock);
lock(dmar_global_lock);
lock(&device->physical_node_lock);
lock(iommu_probe_device_lock);
*** DEADLOCK ***
This driver uses a global lock to protect the list of enumerated DMA
remapping units. It is necessary due to the driver's support for dynamic
addition and removal of remapping units at runtime.
Two distinct code paths require iteration over this remapping unit list:
- Device registration and probing: the driver iterates the list to
register each remapping unit with the upper layer IOMMU framework
and subsequently probe the devices managed by that unit.
- Global configuration: Upper layer components may also iterate the list
to apply configuration changes.
The lock acquisition order between these two code paths was reversed. This
caused lockdep warnings, indicating a risk of deadlock. Fix this warning
by releasing the global lock before invoking upper layer interfaces for
device registration.
Fixes: b150654f74bf ("iommu/vt-d: Fix suspicious RCU usage")
Closes: https://lore.kernel.org/linux-iommu/SJ1PR11MB612953431F94F18C954C4A9CB9D32@SJ1PR11MB6129.namprd11.prod.outlook.com/
Tested-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20250317035714.1041549-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Don't overwrite an IRTE that is posting IRQs to a vCPU with a posted MSI
entry if the host IRQ affinity happens to change. If/when the IRTE is
reverted back to "host mode", it will be reconfigured as a posted MSI or
remapped entry as appropriate.
Drop the "mode" field, which doesn't differentiate between posted MSIs and
posted vCPUs, in favor of a dedicated posted_vcpu flag. Note! The two
posted_{msi,vcpu} flags are intentionally not mutually exclusive; an IRTE
can transition between posted MSI and posted vCPU.
Fixes: ed1e48ea4370 ("iommu/vt-d: Enable posted mode for device MSIs")
Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20250315025135.2365846-3-seanjc@google.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add a helper to take care of reconfiguring an IRTE to deliver IRQs to the
host, i.e. not to a vCPU, and use the helper when an IRTE's vCPU affinity
is nullified, i.e. when KVM puts an IRTE back into "host" mode. Because
posted MSIs use an ephemeral IRTE, using modify_irte() puts the IRTE into
full remapped mode, i.e. unintentionally disables posted MSIs on the IRQ.
Fixes: ed1e48ea4370 ("iommu/vt-d: Enable posted mode for device MSIs")
Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20250315025135.2365846-2-seanjc@google.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
If kzalloc() fails, accessing cfg->supports_bypass causes a null pointer dereference.
Fix by checking for NULL immediately after allocation and returning -ENOMEM.
Fixes: 3bc0102835f6 ("iommu: apple-dart: Allow mismatched bypass support")
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://lore.kernel.org/r/20250314230102.11008-1-qasdev00@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The global dma_dev trick was mostly because the old domain_alloc op
provided no context, so no way to know which IOMMU was to own the
pagetable, or if a suitable one even existed at all. In the new
multi-instance world with domain_alloc_paging this is no longer a
concern - now we know that the given device must be associated with a
valid IOMMU instance which provided the op to call in the first place,
and therefore that instance can and should be the pagetable owner. To
avoid worrying about the lifetime and stability of the rk_domain->iommus
list, and keep the lookups simple and efficient, we'll still stash a
dma_dev pointer, but now it's accurately per-domain.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Tested-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/25dc948a7d35c8142c5719ac22bc523f8524d006.1741886382.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Currently Rockchip calls iommu_device_register() before it's finished
setting up the hardware and driver state, and as such it now gets
unhappy in various ways when registration starts working the way it was
always intended to, and probing client devices straight away. Reorder
the operations to ensure that what we're registering is a prepared and
functional IOMMU instance.
Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Tested-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/e69532f00bf49d98322b96788edb7e2e305e4006.1741886382.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Now that DT-based probing is finally happening in the right order again,
it reveals an issue in Rockchip's of_xlate, which can now be called
during registration, but is using the global dma_dev which is only
assigned later. However, this makes little sense when we're already
looking up the correct IOMMU device, who should logically be the owner
of the devm allocation anyway.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Tested-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/771e91cf16b3048e93f657153b76905665878fa2.1741886382.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The ptp_ocp_signal_from_perout() function supports PTP_PEROUT_DUTY_CYCLE
and PTP_PEROUT_PHASE. It does not support PTP_PEROUT_ONE_SHOT, but does not
reject a request with such an unsupported flag.
Add the appropriate check to ensure that unsupported requests are rejected
both for PTP_PEROUT_ONE_SHOT as well as any future flags.
Fixes: 1aa66a3a135a ("ptp: ocp: Program the signal generators via PTP_CLK_REQ_PEROUT")
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-5-ea930ba82459@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In bcm_ptp_perout_locked, the driver rejects requests which have
PTP_PEROUT_PHASE set. This appears to be an attempt to reject any
unsupported flags. Unfortunately, this only checks one flag, but does not
protect against PTP_PEROUT_ONE_SHOT, or any future flags which may be
added.
Fix the check to ensure that no flag other than the supported
PTP_PEROUT_DUTY_CYCLE is set.
Fixes: 7bfe91efd525 ("net: phy: Add support for 1PPS out and external timestamps")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-4-ea930ba82459@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The lan743x_ptp_io_event_cap_en() function checks that the given request
sets only one of PTP_RISING_EDGE or PTP_FALLING_EDGE, but not both.
However, this driver does not check whether other flags (such as
PTP_EXT_OFF) are set, nor whether any future unrecognized flags are set.
Fix this by adding the appropriate check to the lan743x_ptp_io_extts()
function.
Fixes: 60942c397af6 ("net: lan743x: Add support for PTP-IO Event Input External Timestamp (extts)")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-3-ea930ba82459@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ravb_ptp_extts() function checks the flags coming from the
PTP_EXTTS_REQUEST ioctl, to ensure that future flags are not accepted on
accident.
This was updated to 'honor' the PTP_STRICT_FLAGS in commit 6138e687c7b6
("ptp: Introduce strict checking of external time stamp options.").
However, the driver does not *actually* validate the flags.
I originally fixed this driver to reject future flags in commit
592025a03b34 ("renesas: reject unsupported external timestamp flags"). It
is still unclear whether this hardware timestamps the rising, falling, or
both edges of the input signal.
Accepting requests with PTP_STRICT_FLAGS is a bug, as this could lead to
users mistakenly assuming a request with PTP_RISING_EDGE actually
timestamps the rising edge only.
Reject requests with PTP_STRICT_FLAGS (and hence all PTP_EXTTS_REQUEST2
requests) until someone with access to the datasheet or hardware knowledge
can confirm the timestamping behavior and update this driver.
Fixes: 6138e687c7b6 ("ptp: Introduce strict checking of external time stamp options.")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-2-ea930ba82459@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The igb_ptp_feature_enable_82580 function correctly checks that unknown
flags are not passed to the function. However, it does not actually check
PTP_RISING_EDGE or PTP_FALLING_EDGE when configuring the external timestamp
function.
The data sheet for the 82580 product says:
Upon a change in the input level of one of the SDP pins that was
configured to detect Time stamp events using the TSSDP register, a time
stamp of the system time is captured into one of the two auxiliary time
stamp registers (AUXSTMPL/H0 or AUXSTMPL/H1).
For example to define timestamping of events in the AUXSTMPL0 and
AUXSTMPH0 registers, Software should:
1. Set the TSSDP.AUX0_SDP_SEL field to select the SDP pin that detects
the level change and set the TSSDP.AUX0_TS_SDP_EN bit to 1.
2. Set the TSAUXC.EN_TS0 bit to 1 to enable timestamping
The same paragraph is in the i350 and i354 data sheets.
The wording implies that the time stamps are captured at any level change.
There does not appear to be any way to only timestamp one edge of the
signal.
Reject requests which do not set both PTP_RISING_EDGE and PTP_FALLING_EDGE
when operating under PTP_STRICT_FLAGS mode via PTP_EXTTS_REQUEST2.
Fixes: 38970eac41db ("igb: support EXTTS on 82580/i354/i350")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-1-ea930ba82459@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use 100 Mbps only if the PHY is configured to this speed. Otherwise use
always the maximum speed of 1000 Mbps.
Also remove explicit setting of carrier on and link mode after loopback.
This is not needed anymore, because phy_loopback() with selected speed
signals the link and the speed to the MAC.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250312203010.47429-6-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use genphy_loopback() to disable loopback like ksz9031_set_loopback().
This way disable loopback is implemented only once within
genphy_loopback() and the set_loopback() implementations look similar.
Also fix comment about msleep() in the out-of loopback case which is not
executed in the out-of loopback case.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250312203010.47429-5-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The KSZ9031 PHYs requires full duplex for loopback mode. Add PHY
specific set_loopback() to ensure this.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250312203010.47429-4-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
phy_loopback() leaves it to the PHY driver to select the speed of the
loopback mode. Thus, the speed of the loopback mode depends on the PHY
driver in use.
Add support for speed selection to phy_loopback() to enable loopback
with defined speeds. Ensure that link up is signaled if speed changes
as speed is not allowed to change during link up. Link down and up is
necessary for a new speed.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://patch.msgid.link/20250312203010.47429-3-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
PHY drivers support loopback mode, but it is not possible to select the
speed of the loopback mode. The speed is chosen by the set_loopback()
operation of the PHY driver. Same is valid for genphy_loopback().
There are PHYs that support loopback with different speeds. Extend
set_loopback() to make loopback speed selection possible.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250312203010.47429-2-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for v6.15
Introduce Devicetree binding for providing board-specific firmware-name
for the GENI serial engine block. Add SDM630/636 support in pd-mapper.
Clean up and fix error handling in the SSC block bus driver.
Add missing msm8916-acc compatible to resolve a number of Devicetree
validation errors.
* tag 'qcom-drivers-for-6.15-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible
bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe()
bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls
soc: qcom: pd-mapper: Add support for SDM630/636
dt-bindings: qcom: geni-se: Add 'firmware-name' property for firmware loading
Link: https://lore.kernel.org/r/20250319142448.2279164-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.15
Improve the client interface for the Qualcomm ICE driver to avoid
leaking references, including fixing the client drivers to call the new
function.
Adopt str_on_off() helper in AOSS driver and mark non-global servreg QMI
element info array in the PDR driver static.
* tag 'qcom-drivers-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: Do not expose internal servreg_location_entry_ei array
soc: qcom: ice: make of_qcom_ice_get() static
scsi: ufs: qcom: fix dev reference leaked through of_qcom_ice_get
mmc: sdhci-msm: fix dev reference leaked through of_qcom_ice_get
soc: qcom: ice: introduce devm_of_qcom_ice_get
dt-bindings: soc: qcom: qcom,pmic-glink: Document SM8750 compatible
soc: qcom: Use str_enable_disable-like helpers
Link: https://lore.kernel.org/r/20250317210158.2025380-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
* kvm-arm64/pmuv3-asahi:
: Support PMUv3 for KVM guests on Apple silicon
:
: Take advantage of some IMPLEMENTATION DEFINED traps available on Apple
: parts to trap-and-emulate the PMUv3 registers on behalf of a KVM guest.
: Constrain the vPMU to a cycle counter and single event counter, as the
: Apple PMU has events that cannot be counted on every counter.
:
: There is a small new interface between the ARM PMU driver and KVM, where
: the PMU driver owns the PMUv3 -> hardware event mappings.
arm64: Enable IMP DEF PMUv3 traps on Apple M*
KVM: arm64: Provide 1 event counter on IMPDEF hardware
drivers/perf: apple_m1: Provide helper for mapping PMUv3 events
KVM: arm64: Remap PMUv3 events onto hardware
KVM: arm64: Advertise PMUv3 if IMPDEF traps are present
KVM: arm64: Compute synthetic sysreg ESR for Apple PMUv3 traps
KVM: arm64: Move PMUVer filtering into KVM code
KVM: arm64: Use guard() to cleanup usage of arm_pmus_lock
KVM: arm64: Drop kvm_arm_pmu_available static key
KVM: arm64: Use a cpucap to determine if system supports FEAT_PMUv3
KVM: arm64: Always support SW_INCR PMU event
KVM: arm64: Compute PMCEID from arm_pmu's event bitmaps
drivers/perf: apple_m1: Support host/guest event filtering
drivers/perf: apple_m1: Refactor event select/filter configuration
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers
Amlogic drivers changes for v6.15:
- GPIO interrupt controller support for Amlogic A4 and A5 SoCs
* tag 'amlogic-drivers-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
irqchip: Add support for Amlogic A4 and A5 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs
Link: https://lore.kernel.org/r/eeaa8d3b-4fc3-4dae-92b8-0fc590e1a070@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
* kvm-arm64/pv-cpuid:
: Paravirtualized implementation ID, courtesy of Shameer Kolothum
:
: Big-little has historically been a pain in the ass to virtualize. The
: implementation ID (MIDR, REVIDR, AIDR) of a vCPU can change at the whim
: of vCPU scheduling. This can be particularly annoying when the guest
: needs to know the underlying implementation to mitigate errata.
:
: "Hyperscalers" face a similar scheduling problem, where VMs may freely
: migrate between hosts in a pool of heterogenous hardware. And yes, our
: server-class friends are equally riddled with errata too.
:
: In absence of an architected solution to this wart on the ecosystem,
: introduce support for paravirtualizing the implementation exposed
: to a VM, allowing the VMM to describe the pool of implementations that a
: VM may be exposed to due to scheduling/migration.
:
: Userspace is expected to intercept and handle these hypercalls using the
: SMCCC filter UAPI, should it choose to do so.
smccc: kvm_guest: Fix kernel builds for 32 bit arm
KVM: selftests: Add test for KVM_REG_ARM_VENDOR_HYP_BMAP_2
smccc/kvm_guest: Enable errata based on implementation CPUs
arm64: Make _midr_in_range_list() an exported function
KVM: arm64: Introduce KVM_REG_ARM_VENDOR_HYP_BMAP_2
KVM: arm64: Specify hypercall ABI for retrieving target implementations
arm64: Modify _midr_range() functions to read MIDR/REVIDR internally
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.15
1. Minor cleanup in Nvidia Tegra20 EMC.
2. Extend support for Mediatek MT8192 to match recommended by vendor and
improve VENC hardware behavior during stress testing.
* tag 'memory-controller-drv-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: mtk-smi: Add ostd setting for mt8192
memory: tegra20-emc: Drop redundant platform_get_irq() error printk
Link: https://lore.kernel.org/r/20250316143503.17620-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/drivers
Reset controller updates for v6.15
* Add missing microchip,sam9x7-rstc compatible to device tree binding
documentation.
* Add SCU reset driver for i.MX8QXP and i.MX8QM.
* tag 'reset-for-v6.15' of git://git.pengutronix.de/pza/linux:
reset: imx: fix incorrect module device table
reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM
dt-bindings: firmware: imx: add property reset-controller
dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7
Link: https://lore.kernel.org/r/20250314164406.744117-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
* kvm-arm64/nv-vgic:
: NV VGICv3 support, courtesy of Marc Zyngier
:
: Support for emulating the GIC hypervisor controls and managing shadow
: VGICv3 state for the L1 hypervisor. As part of it, bring in support for
: taking IRQs to the L1 and UAPI to manage the VGIC maintenance interrupt.
KVM: arm64: nv: Fail KVM init if asking for NV without GICv3
KVM: arm64: nv: Allow userland to set VGIC maintenance IRQ
KVM: arm64: nv: Fold GICv3 host trapping requirements into guest setup
KVM: arm64: nv: Propagate used_lrs between L1 and L0 contexts
KVM: arm64: nv: Request vPE doorbell upon nested ERET to L2
KVM: arm64: nv: Respect virtual HCR_EL2.TWx setting
KVM: arm64: nv: Add Maintenance Interrupt emulation
KVM: arm64: nv: Handle L2->L1 transition on interrupt injection
KVM: arm64: nv: Nested GICv3 emulation
KVM: arm64: nv: Sanitise ICH_HCR_EL2 accesses
KVM: arm64: nv: Plumb handling of GICv3 EL2 accesses
KVM: arm64: nv: Add ICH_*_EL2 registers to vpcu_sysreg
KVM: arm64: nv: Load timer before the GIC
arm64: sysreg: Add layout for ICH_MISR_EL2
arm64: sysreg: Add layout for ICH_VTR_EL2
arm64: sysreg: Add layout for ICH_HCR_EL2
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.15
- ti-sci: Default set to ARCH_K3 for the ti sci driver in preperation for
the driver to be default set as module in defconfig.
- k3-socinfo: Explicitly build up regmap instead of depending on syscon
helper
* tag 'ti-driver-soc-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
firmware: config: ti-sci: Default set to ARCH_K3 for the ti sci driver
soc: ti: k3-socinfo: Do not use syscon helper to build regmap
Link: https://lore.kernel.org/r/20250312113826.ka63nijuftgs6h52@mocker
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung mach/soc changes for v6.15
1. S3C: Drop linux/fb.h header.
2. Exynos ChipID: Check if memory allocation succeeded.
* tag 'samsung-soc-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: exynos-chipid: Add NULL pointer check in exynos_chipid_probe()
ARM: s3c: Do not include <linux/fb.h>
Link: https://lore.kernel.org/r/20250309185601.10616-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.15
1. Add support for Exynos USI v1 serial engines. Drivers already
supported newer IP blocks - USI v2 - present in Exynos850 and newer.
A bit older ARM64 designs, like Exynos8895 use older USI v1 block.
2. Add Exynos ACPM (Alive Clock and Power Manager) protocol driver
for Google GS101 SoC. ACPM protocol allows communication between the
power management firmware and other embedded processors.
3. Exynos2200: Add PMU, ChipID and SYSREG Devicetree bindings.
4. Exynos7870: Add PMU and ChipID Devicetree bindings.
5. Various cleanups.
* tag 'samsung-drivers-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example
soc: samsung: include linux/array_size.h where needed
soc: samsung: exynos-chipid: add support for exynos7870
dt-bindings: soc: samsung: exynos-pmu: add exynos7870-pmu compatible
dt-bindings: hwinfo: samsung,exynos-chipid: add exynos7870-chipid compatible
soc: samsung: exynos-chipid: add exynos2200 SoC support
dt-bindings: hwinfo: samsung,exynos-chipid: add exynos2200 compatible
dt-bindings: soc: samsung: exynos-pmu: add exynos2200 compatible
dt-bindings: soc: samsung: exynos-sysreg: add sysreg compatibles for exynos2200
firmware: Exynos ACPM: Fix spelling mistake "Faile" -> "Failed"
MAINTAINERS: add entry for the Samsung Exynos ACPM mailbox protocol
firmware: add Exynos ACPM protocol driver
dt-bindings: firmware: add google,gs101-acpm-ipc
soc: samsung: usi: implement support for USIv1 and exynos8895
soc: samsung: usi: add a routine for unconfiguring the ip
dt-bindings: soc: samsung: usi: add USIv1 and samsung,exynos8895-usi
soc: samsung: Use syscon_regmap_lookup_by_phandle_args
Link: https://lore.kernel.org/r/20250309185601.10616-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: Changes for v6.15-rc1
A simple cleanup patch to use str_yes_no() instead of an open-coded
version.
* tag 'tegra-for-6.15-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Use str_enable_disable-like helpers
Link: https://lore.kernel.org/r/20250307162332.3451523-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/arm
Microchip AT91 SoC updates for v6.15
This update includes:
- SoC driver support for Microchip SAMA7D65
- power management support for Microchip SAMA7D65
- power management fixes
- documentation fixes
* tag 'at91-soc-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: pm: Enable ULP0/ULP1 for SAMA7D65
ARM: at91: pm: Add Backup mode for SAMA7D65
ARM: at91: pm: add DT compatible support for sama7d65
ARM: at91: pm: fix at91_suspend_finish for ZQ calibration
dt-bindings: ARM: at91: add Calao USB boards
dt-bindings: ARM: at91: make separate entry for Olimex board
ARM: at91: Add Support in SoC driver for SAMA7D65
dt-bindings: atmel-sysreg: Add SAMA7D65 Chip ID
Link: https://lore.kernel.org/r/20250312173755.975074-2-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
VFs cannot read the NAK_COUNTER register. This information is only
available through PMFW metrics.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add active_umc_mask to ras init_flags.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add description for debug_mask bit options.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In certain cases, it's desirable to avoid PMFW log transactions to
system memory. Add a mask bit to decide whether to allocate smu pool in
device memory or system memory.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No need to make the workload profile setup dependent
on the results of cancelling the delayed work thread.
We have all of the necessary checking in place for the
workload profile reference counting, so separate the
two. As it is now, we can theoretically end up with
the call from begin_use happening while the worker
thread is executing which would result in the profile
not getting set for that submission. It should not
affect the reference counting.
v2: bail early if the the profile is already active (Lijo)
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No need to make the workload profile setup dependent
on the results of cancelling the delayed work thread.
We have all of the necessary checking in place for the
workload profile reference counting, so separate the
two. As it is now, we can theoretically end up with
the call from begin_use happening while the worker
thread is executing which would result in the profile
not getting set for that submission. It should not
affect the reference counting.
v2: bail early if the the profile is already active (Lijo)
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add EEPROM I2C address support for smu v13_0_12.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We need to make sure the workload profile ref counts are
balanced. This isn't currently the case because we can
increment the count on submissions, but the decrement may
be delayed as work comes in. Track when we enable the
workload profile so the references are balanced.
v2: switch to a mutex and active flag
v3: fix mutex init
Fixes: 1443dd3c67f6 ("drm/amd/pm: fix and simplify workload handling")
Cc: Yang Wang <kevinyang.wang@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We need to make sure the workload profile ref counts are
balanced. This isn't currently the case because we can
increment the count on submissions, but the decrement may
be delayed as work comes in. Track when we enable the
workload profile so the references are balanced.
v2: switch to a mutex and active flag
v3: fix mutex init
Fixes: 8fdb3958e396 ("drm/amdgpu/gfx: add ring helpers for setting workload profile")
Cc: Yang Wang <kevinyang.wang@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Tested-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For certain ASICs where dequeue_wait_count don't need to be initialized,
pm_config_dequeue_wait_counts_v9 return without filling in the packet
information. However, the calling function interprets this as a success
and sends the uninitialized packet to firmware causing hang.
Fix the above bug by not calling pm_config_dequeue_wait_counts_v9 for
ASICs that don't need the value to be initialized.
v2: Removed redudant code.
Tidy up code based on review comments
v3: Don't call pm_config_dequeue_wait_counts_v9 for certain ASICs
Fixes: ed962f8d0603 ("drm/amdkfd: Add pm_config_dequeue_wait_counts API")
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use max3() macro instead of nesting max() to simplify the return
statement.
Signed-off-by: FengWei <feng.wei8@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We keep the gang submission fence around in adev, make sure that it
stays alive.
v2: fix memory leak on retry
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The 'continue' statements need to be under spinlock, since
the spinlock needs to be held as a loop invariant.
Fixes: 0762bdd30279 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When a character array without a terminating NUL character has a static
initializer, GCC 15's -Wunterminated-string-initialization will only
warn if the array lacks the "nonstring" attribute[1]. Mark the arrays
with __nonstring to correctly identify the char array as "not a C string"
and thereby eliminate the warning:
In file included from ../drivers/net/ethernet/cadence/macb_main.c:42:
../drivers/net/ethernet/cadence/macb.h:1070:35: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
1070 | GEM_STAT_TITLE(TX1519CNT, "tx_greater_than_1518_byte_frames"),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/cadence/macb.h:1050:24: note: in definition of macro 'GEM_STAT_TITLE_BITS'
1050 | .stat_string = title, \
| ^~~~~
../drivers/net/ethernet/cadence/macb.h:1070:9: note: in expansion of macro 'GEM_STAT_TITLE'
1070 | GEM_STAT_TITLE(TX1519CNT, "tx_greater_than_1518_byte_frames"),
| ^~~~~~~~~~~~~~
../drivers/net/ethernet/cadence/macb.h:1097:35: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
1097 | GEM_STAT_TITLE(RX1519CNT, "rx_greater_than_1518_byte_frames"),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/cadence/macb.h:1050:24: note: in definition of macro 'GEM_STAT_TITLE_BITS'
1050 | .stat_string = title, \
| ^~~~~
../drivers/net/ethernet/cadence/macb.h:1097:9: note: in expansion of macro 'GEM_STAT_TITLE'
1097 | GEM_STAT_TITLE(RX1519CNT, "rx_greater_than_1518_byte_frames"),
| ^~~~~~~~~~~~~~
Since these strings are copied with memcpy() they do not need to be
NUL terminated, and can use __nonstring:
memcpy(p, gem_statistics[i].stat_string,
ETH_GSTRING_LEN);
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117178 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250312200700.make.521-kees@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
