| Age | Commit message (Collapse) | Author |
|---|
|
Add various register definitions which will be used by the new driver.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/1dcb5abb-26f8-4db5-be36-057de56465e5@gmail.com
|
|
RTL8852BE-VT support for firmware 29.122. Add parser for Bluetooth channel
map report version 7.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250308025832.10400-5-pkshih@realtek.com
|
|
In order to rearrange the structure member, the format update to version 7.
And to parse the report correctly, add the related logic.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250308025832.10400-4-pkshih@realtek.com
|
|
This report will feedback some basic information from firmware(PTA counter,
report counter, mailbox counter etc). And the report version need to match
driver & firmware both side. The original logic break the switch case logic
before driver update the report version. It made the report can not be
parsed correctly. Delete the break at the version 7 and 8.
Add logic to count C2H event report.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250308025832.10400-3-pkshih@realtek.com
|
|
Add format version of Wi-Fi firmware commands/events for firmware
version 0.29.122.0.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250308025832.10400-2-pkshih@realtek.com
|
|
Some of 11ax AP set the UL HE-SIG-A2 reserved subfield to all 0s, which
will cause the 11be chip to recognize trigger frame as EHT. We propose
a method to bypass the "UL HE-SIG-A2 reserved subfield" and always uses
HE TB in response to the AP's trigger frame.
Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250306021144.12854-6-pkshih@realtek.com
|
|
The 8922A now supports dynamic antenna gain. However, in firmware
before v0.35.64.0, different transmit powers cannot be applied to
each RF path. To comply with regulatory limits in these older
firmware, the lower of the two requested transmit powers will
be used for both paths when they differ.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250306021144.12854-5-pkshih@realtek.com
|
|
The dynamic antenna gain (DAG) considers the country, meaning DAG can
be activated only when countries and regulatory domains allow it.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250306021144.12854-4-pkshih@realtek.com
|
|
TAS state switching mechanism now incorporates the TX ratio as a
decision parameter. The average power calculation has been improved
by using a higher resolution conversion from dBm to linear. During
scan or MCC operations, TAS state is forced to static SAR and
suspend the average power calculation. Additionally, TAS window
size depends on the regulatory domain and band to ensure compliance.
TAS is enabled when permitted by the regulatory domain and is
currently supported on the 8852CE.
For debugging, add a flag to disable_dm that can stop TAS mechanism.
Co-developed-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250306021144.12854-3-pkshih@realtek.com
|
|
Enhanced the dBm to linear conversion function to accommodate negative
dBm values and improved the precision from 1 dBm to 0.25 dBm.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250306021144.12854-2-pkshih@realtek.com
|
|
There is a type bug because the return statement:
return ret < 0 ? ret : recv_cnt;
The issue is that ret is an int, recv_cnt is a u32 and the function
returns ssize_t, which is a signed long. The way that the type promotion
works is that the negative error codes are first cast to u32 and then
to signed long. The error codes end up being positive instead of
negative and the callers treat them as success.
Fixes: 81cc7e51c4f1 ("drm/mediatek: Allow commands to be sent during video mode")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202412210801.iADw0oIH-lkp@intel.com/
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/b754a408-4f39-4e37-b52d-7706c132e27f@stanley.mountain/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Add DRM support for MT8365 SoC.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231023-display-support-v7-3-6703f3e26831@baylibre.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
The function mtk_dp_wait_hpd_asserted() may be called before the
`mtk_dp->drm_dev` pointer is assigned in mtk_dp_bridge_attach().
Specifically it can be called via this callpath:
- mtk_edp_wait_hpd_asserted
- [panel probe]
- dp_aux_ep_probe
Using "drm" level prints anywhere in this callpath causes a NULL
pointer dereference. Change the error message directly in
mtk_dp_wait_hpd_asserted() to dev_err() to avoid this. Also change the
error messages in mtk_dp_parse_capabilities(), which is called by
mtk_dp_wait_hpd_asserted().
While touching these prints, also add the error code to them to make
future debugging easier.
Fixes: 7eacba9a083b ("drm/mediatek: dp: Add .wait_hpd_asserted() for AUX bus")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250116094249.1.I29b0b621abb613ddc70ab4996426a3909e1aa75f@changeid/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
When CONFIG_MTK_CMDQ is enabled, if the display is controlled by the CPU
while other hardware is controlled by the GCE, the display will encounter
a mbox request channel failure.
However, it will still enter the CONFIG_MTK_CMDQ statement, causing the
config_updating flag to never be set to false. As a result, no page flip
event is sent back to user space, and the screen does not update.
Fixes: da03801ad08f ("drm/mediatek: Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb()")
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250224051301.3538484-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
UAPI Changes:
- Add sysfs for SLPC power profiles [slpc] (Vinay Belgaumkar)
Driver Changes:
Fixes/improvements/new stuff:
- Fix zero delta busyness issue [pmu] (Umesh Nerlige Ramappa)
- Fix page cleanup on DMA remap failure (Brian Geffon)
- Debug print LRC state entries only if the context is pinned [guc] (Daniele Ceraolo Spurio)
- Drop custom hotplug code [pmu] (Lucas De Marchi)
- Use spin_lock_irqsave() in interruptible context [guc] (Krzysztof Karas)
- Add wait on depth stall done bit handling [gen12] (Juha-Pekka Heikkila)
Miscellaneous:
- Change throttle criteria for rps [selftest] (Raag Jadav)
- Add debug print about hw config table size (John Harrison)
- Include requested frequency in slow firmware load messages [uc] (John Harrison)
- Remove i915_pmu_event_event_idx() [pmu] (Lucas De Marchi)
- Remove unused live_context_for_engine (Dr. David Alan Gilbert)
- Add Wa_22010465259 in its respective WA list (Ranu Maurya)
- Correct frequency handling in RPS power measurement [selftests] (Sk Anirban)
- Add helper function slpc_measure_power [guc/slpc] (Sk Anirban)
- Revert "drm/i915/gt: Log reason for setting TAINT_WARN at reset" [gt] (Sebastian Brzezinka)
- Avoid using uninitialized context [selftests] (Krzysztof Karas)
- Use struct_size() helper in kmalloc() (luoqing)
- Use prandom in selftest [selftests] (Markus Theil)
- Replace kmap with its safer kmap_local_page counterpart [gt] (Andi Shyti)
Merges:
- Merge drm/drm-next into drm-intel-gt-next (Tvrtko Ursulin)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z77NLt2mR7SqxJ4u@linux
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of driver specific fixes, an error handling fix for the Atmel
QuadSPI driver and a fix for a nasty synchronisation issue in the data
path for the Microchip driver which affects larger transfers.
There's also a MAINTAINERS update for the Samsung driver"
* tag 'spi-fix-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: microchip-core: prevent RX overflows when transmit size > FIFO size
MAINTAINERS: add tambarus as R for Samsung SPI
spi: atmel-quadspi: remove references to runtime PM on error path
|
|
Don't error out on large MTU if XDP is multi-buf.
The ping test now tests ping with XDP and high MTU.
netdevsim doesn't actually run the prog (yet?) so
it doesn't matter if the prog was multi-buf..
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20250311092820.542148-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All drivers that use queue API are already converted to use
netdev instance lock. Move netdev instance lock management to
the netlink layer and drop rtnl_lock.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry. <almasrymina@google.com>
Link: https://patch.msgid.link/20250311144026.4154277-4-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
for_each_possible_cpu() is currently used to initialize cpuidle
in below cpuidle drivers:
drivers/cpuidle/cpuidle-arm.c
drivers/cpuidle/cpuidle-big_little.c
drivers/cpuidle/cpuidle-psci.c
drivers/cpuidle/cpuidle-qcom-spm.c
drivers/cpuidle/cpuidle-riscv-sbi.c
However, in cpu_dev_register_generic(), for_each_present_cpu()
is used to register CPU devices which means the CPU devices are
only registered for present CPUs and not all possible CPUs.
With nosmp or maxcpus=0, only the boot CPU is present, lead
to the failure:
| Failed to register cpuidle device for cpu1
Then rollback to cancel all CPUs' cpuidle registration.
Change for_each_possible_cpu() to for_each_present_cpu() in the
above cpuidle drivers to ensure it only registers cpuidle devices
for CPUs that are actually present.
Fixes: b0c69e1214bc ("drivers: base: Use present CPUs in GENERIC_CPU_DEVICES")
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Yuanjie Yang <quic_yuanjiey@quicinc.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20250307145547.2784821-1-ping.bai@nxp.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
pm_clk_remove() is currently unused.
It hasn't been used since at least 2011 when it was renamed from
pm_runtime_clk_remove() by commit 3d5c30367cbc ("PM: Rename clock
management functions")
Remove it.
Note that the __pm_clk_remove() is still used and is left in.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250307212347.68785-1-linux@treblig.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There's a race between initializing the governor and userspace accessing
the sysfs interface. From time to time the Intel graphics CI shows this
signature:
<1>[] #PF: error_code(0x0000) - not-present page
<6>[] PGD 0 P4D 0
<4>[] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
<4>[] CPU: 3 UID: 0 PID: 562 Comm: thermald Not tainted 6.14.0-rc4-CI_DRM_16208-g7e37396f86d8+ #1
<4>[] Hardware name: Intel Corporation Twin Lake Client Platform/AlderLake-N LP5 RVP, BIOS TWLNFWI1.R00.5222.A01.2405290634 05/29/2024
<4>[] RIP: 0010:policy_show+0x1a/0x40
thermald tries to read the policy file between the sysfs files being
created and the governor set by thermal_set_governor(), which causes the
NULL pointer dereference.
Similarly to the hwmon interface, delay exposing the sysfs files to when
the governor is already set.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13655
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20250307-thermal-sysfs-race-v1-1-8a3d4d4ac9c4@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Although it does not seem to have any untoward side-effects,
the use of ';' to separate to assignments seems more appropriate than ','.
Flagged by clang-19 -Wcomma
No functional change intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250307-mlx5-comma-v1-1-934deb6927bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bnxt_dl_reload_up is completely missing instance lock management
which can result in `devlink dev reload` leaving with instance
lock held. Add the missing calls.
Also add netdev_assert_locked to make it clear that the up() method
is running with the instance lock grabbed.
v2:
- add net/netdev_lock.h include to bnxt_devlink.c for netdev_assert_locked
Fixes: 004b5008016a ("eth: bnxt: remove most dependencies on RTNL")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250309215851.2003708-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netdev_lock_ops conditionally grabs instance lock when queue_mgmt_ops
is defined. However queue_mgmt_ops support is signaled via FW
so we can sometimes boot without queue_mgmt_ops being set.
This will result in bnxt running without instance lock which
the driver now heavily depends on. Set request_ops_lock to true
unconditionally to always request netdev instance lock.
Fixes: 004b5008016a ("eth: bnxt: remove most dependencies on RTNL")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250309215851.2003708-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All (error) paths that call dev_close are already holding instance lock,
so switch to netif_close to avoid the deadlock.
v2:
- add missing EXPORT_MODULE for netif_close
Fixes: 004b5008016a ("eth: bnxt: remove most dependencies on RTNL")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250309215851.2003708-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The body of dpm_wait_for_children() is indented by 7 spaces instead of a
single TAB.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/9c8ff2b103c3ba7b0d27bdc8248b05e3b1dc9551.1741776430.git.geert+renesas@glider.be
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
into drm-next
Nova changes for v6.15
nova-core:
- initial skeleton driver
- documentation
- project guidelines
- task (todo) list
firmware:
- `module_firmware!` macro
- `firmware::ModInfoBuilder`
Rust:
- `LocalModule` type alias
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/Z84dHHEn6xfvlRxk@cassiopeiae
|
|
pm_generic_thaw_early() has been unused since 2016's
commit 294f47ffd55c ("PM / Domains: Remove redundant system PM callbacks")
pm_generic_freeze_late() has been unused since 2019's
commit 3cd7957e85e6 ("ACPI: PM: Simplify and fix PM domain hibernation
callbacks")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250307021750.457600-1-linux@treblig.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
pnp_remove_card() is currently unused, it has been since it was
added in 2003's BKrev: 3e6d3f19XSmESWEZnNEReEJOJW5SOw
pnp_unregister_protocol() is currently unused, it has been since
it was added in 2002's BKrev: 3df0cf6d4FVUKndhbfxjL7pksw5PGA
Remove them, and pnp_remove_card_device() and __pnp_remove_device()
which are now no longer used.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250307214936.74504-1-linux@treblig.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
PRT BOs may not have any backing store, so bo->tbo.resource will be
NULL. Check for that before dereferencing.
Fixes: 0cce5f285d9a ("drm/amdkfd: Check correct memory types for is_system variable")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Natalie Vock <natalie.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3e3fcd29b505cebed659311337ea03b7698767fc)
Cc: stable@vger.kernel.org # 6.12.x
|
|
[Why]
If reset is detected and kfd need to evict working queues, HWS moving queue will be failed.
Then remaining queues are not evicted and in active state.
After reset done, kfd uses HWS to termination remaining activated queues but HWS is resetted.
So remove queue will be failed again.
[How]
Keep removing all queues even if HWS returns failed.
It will not affect cpsch as it checks reset_domain->sem.
v2: If any queue failed, evict queue returns error.
v3: Declare err inside the if-block.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 42c854b8fb0cce512534aa2b7141948e80c6ebb0)
Cc: stable@vger.kernel.org
|
|
Use a meaningful constant explicitly instead of hard-coding a literal.
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Link: https://patch.msgid.link/20250312065937.1787241-1-matsuda-daisuke@fujitsu.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
There is no difference between the sge of READ and non-READ
operations in hns RoCE. Set max_sge_rd to the same value as
max_send_sge.
Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250311084857.3803665-8-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add xa_destroy() for xarray in driver.
Fixes: 5c1f167af112 ("RDMA/hns: Init SRQ table for hip08")
Fixes: 27e19f451089 ("RDMA/hns: Convert cq_table to XArray")
Fixes: 736b5a70db98 ("RDMA/hns: Convert qp_table_tree to XArray")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250311084857.3803665-7-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When ib_copy_to_udata() fails in hns_roce_create_qp_common(),
hns_roce_qp_remove() should be called in the error path to
clean up resources in hns_roce_qp_store().
Fixes: 0f00571f9433 ("RDMA/hns: Use new SQ doorbell register for HIP09")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250311084857.3803665-6-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
SQ params from userspace are checked in by set_user_sq_size(). But
when the check fails, the function doesn't return but instead keep
running and overwrite 'ret'. As a result, the invalid params will
not get blocked actually.
Add a return right after the failed check. Besides, although the
check result of kernel sq params will not be overwritten, to keep
coding style unified, move default_congest_type() before
set_kernel_sq_size().
Fixes: 6ec429d5887a ("RDMA/hns: Support userspace configuring congestion control algorithm with QP granularity")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250311084857.3803665-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Currently the condition of unmapping sdb in error path is not exactly
the same as the condition of mapping in alloc_user_qp_db(). This may
cause a problem of unmapping an unmapped db in some case, such as
when the QP is XRC TGT. Unified the two conditions.
Fixes: 90ae0b57e4a5 ("RDMA/hns: Combine enable flags of qp")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250311084857.3803665-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Driver runs a for-loop when allocating bt pages and mapping them with
buffer pages. When a large buffer (e.g. MR over 100GB) is being allocated,
it may require a considerable loop count. This will lead to soft lockup:
watchdog: BUG: soft lockup - CPU#27 stuck for 22s!
...
Call trace:
hem_list_alloc_mid_bt+0x124/0x394 [hns_roce_hw_v2]
hns_roce_hem_list_request+0xf8/0x160 [hns_roce_hw_v2]
hns_roce_mtr_create+0x2e4/0x360 [hns_roce_hw_v2]
alloc_mr_pbl+0xd4/0x17c [hns_roce_hw_v2]
hns_roce_reg_user_mr+0xf8/0x190 [hns_roce_hw_v2]
ib_uverbs_reg_mr+0x118/0x290
watchdog: BUG: soft lockup - CPU#35 stuck for 23s!
...
Call trace:
hns_roce_hem_list_find_mtt+0x7c/0xb0 [hns_roce_hw_v2]
mtr_map_bufs+0xc4/0x204 [hns_roce_hw_v2]
hns_roce_mtr_create+0x31c/0x3c4 [hns_roce_hw_v2]
alloc_mr_pbl+0xb0/0x160 [hns_roce_hw_v2]
hns_roce_reg_user_mr+0x108/0x1c0 [hns_roce_hw_v2]
ib_uverbs_reg_mr+0x120/0x2bc
Add a cond_resched() to fix soft lockup during these loops. In order not
to affect the allocation performance of normal-size buffer, set the loop
count of a 100GB MR as the threshold to call cond_resched().
Fixes: 38389eaa4db1 ("RDMA/hns: Add mtr support for mixed multihop addressing")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250311084857.3803665-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Use %u for unsigned type and %d for enum.
Signed-off-by: Guofeng Yue <yueguofeng@h-partners.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250311084857.3803665-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER
The line
obj-$(INTEL_ISH_FIRMWARE_DOWNLOADER) += intel-ish-hid/
in top-level HID Makefile is both superfluous (as CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER
depends on CONFIG_INTEL_ISH_HID, which contains intel-ish-hid/ already) and wrong (as it's
missing the CONFIG_ prefix).
Just remove it.
Fixes: 91b228107da3e ("HID: intel-ish-hid: ISH firmware loader client driver")
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Altera USB Blaster 3, available as both a cable and an on-board
solution, is primarily used for programming and debugging FPGAs.
It interfaces with host software such as Quartus Programmer,
System Console, SignalTap, and Nios Debugger. The device utilizes
either an FT2232 or FT4232 chip.
Enabling the support for various configurations of the on-board
USB Blaster 3 by including the appropriate VID/PID pairs,
allowing it to function as a serial device via ftdi_sio.
Note that this check-in does not include support for the
cable solution, as it does not support UART functionality.
The supported configurations are determined by the
hardware design and include:
1) PID 0x6022, FT2232, 1 JTAG port (Port A) + Port B as UART
2) PID 0x6025, FT4232, 1 JTAG port (Port A) + Port C as UART
3) PID 0x6026, FT4232, 1 JTAG port (Port A) + Port C, D as UART
4) PID 0x6029, FT4232, 1 JTAG port (Port B) + Port C as UART
5) PID 0x602a, FT4232, 1 JTAG port (Port B) + Port C, D as UART
6) PID 0x602c, FT4232, 1 JTAG port (Port A) + Port B as UART
7) PID 0x602d, FT4232, 1 JTAG port (Port A) + Port B, C as UART
8) PID 0x602e, FT4232, 1 JTAG port (Port A) + Port B, C, D as UART
These configurations allow for flexibility in how the USB Blaster 3 is
used, depending on the specific needs of the hardware design.
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The warning for suspect probe conditions inadvertently got moved too
early in a prior respin - it happened to work out OK for fwspecs, but in
general still needs to be after the ops->probe_device call so drivers
which filter devices for themselves have a chance to do that.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
Link: https://lore.kernel.org/r/72a4853e7ef36e7c1c4ca171ed4ed8e1a463a61a.1741791691.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Commit c780d01cf1a6 ("media: vb2: vb2_core_queue_init(): sanity check lock
and wait_prepare/finish") added a sanity check to ensure that if there are
no wait_prepare/finish callbacks set by the driver, then the vb2_queue lock
must be set, since otherwise the vb2 core cannot do correct locking.
The rtl2832_sdr.c triggered this warning: it turns out that while the
driver does set this lock, it sets it too late. So move it up to before
the vb2_queue_init() call.
Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
Closes: https://lore.kernel.org/linux-media/20241211042355.8479-1-user@am64/
Fixes: 8fcd2795d22a ("media: rtl2832_sdr: drop vb2_ops_wait_prepare/finish")
Cc: stable@vger.kernel.org
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Remove the unnecessary bool conversion and simplify the code.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250224220339.199180-2-thorsten.blum@linux.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Function rk_udphy_dp_hpd_event_trigger will set vogrf let it
trigger HPD interrupt to DP by Type-C. This configuration is only
required when the DP work in Alternate Mode, and called by
typec_mux_set. In standard DP mode, such settings will prevent
the DP from receiving HPD interrupts.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Link: https://lore.kernel.org/r/20250302115257.188774-1-andyshrk@163.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
I do not know the controller enough to really understand what is
happening under the hood, but most of the supported IPs just disable
direct access without explicit reason.
In practice we observe a significant speed improvement when using
indirect mode, some kind of direct mapping, instead of DAC, Direct
ACcess. Add the relevant quirk for all boards with the same
defaults as AM654 to use INDAC (INDirect ACcess) instead.
Speed tests show no change on the write speed on a SPI NAND chip clocked
at 25MHz on the AM62A LP SK, but a read speed jumping from 3500kiB/s up
to more than 10000kiB/s (approximately x3).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20250305200933.2512925-3-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In 2020, there's been an unnoticed change which rightfully attempted to
report probe deferrals upon DMA absence by checking the return value of
dma_request_chan_by_mask(). By doing so, it also reported errors which
were simply ignored otherwise, likely on purpose.
This change actually turned a void return into an error code. Hence, not
only the -EPROBE_DEFER error codes but all error codes got reported to
the callers, now failing to probe in the absence of Rx DMA channel,
despite the fact that DMA seems to not be supported natively by many
implementations.
Looking at the history, this change probably led to:
ad2775dc3fc5 ("spi: cadence-quadspi: Disable the DAC for Intel LGM SoC")
f724c296f2f2 ("spi: cadence-quadspi: fix Direct Access Mode disable for SoCFPGA")
In my case, the AM62A LP SK core octo-SPI node from TI does not
advertise any DMA channel, hinting that there is likely no support for
it, but yet when the support for the am654 compatible was added, DMA
seemed to be used, so just discarding its use with the
CQSPI_DISABLE_DAC_MODE quirk for this compatible does not seem the
correct approach.
Let's get change the return condition back to:
- return a probe deferral error if we get one
- ignore the return value otherwise
The "error" log level was however likely too high for something that is
expected to fail, so let's lower it arbitrarily to the info level.
Fixes: 935da5e5100f ("mtd: spi-nor: cadence-quadspi: Handle probe deferral while requesting DMA channel")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20250305200933.2512925-2-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
corresponding set flags are set
According documentation of phy_configure_opts_dp, at the configure
stage, link rates should only be verify/configure when set_rate
flag is set, the same applies to lanes and voltage.
So do it as the documentation says.
Because voltage setting depends on the lanes, link rates set
previously, so record the link rates and lanes at it's verify stage.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Link: https://lore.kernel.org/r/20250312080041.524546-1-andyshrk@163.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
atapi_check_dma() allows a LLD to filter ATAPI commands, returning a
status indicating whether or not it is OK to use DMA for the supplied
ATAPI command.
Change atapi_check_dma() to return -EOPNOTSUPP instead of 1 for an
ATAPI command that is not allowed to use DMA.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250312133954.6666-1-chenhuacai@loongson.cn
[cassel: improve commit log]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Commit 1f47ed294a2b ("block: cleanup and fix batch completion adding
conditions") modified the evaluation criteria for the third argument,
'ioerror', in the blk_mq_add_to_batch() function. Initially, the
function had checked if 'ioerror' equals zero. Following the commit, it
started checking for negative error values, with the presumption that
such values, for instance -EIO, would be passed in.
However, blk_mq_add_to_batch() callers do not pass negative error
values. Instead, they pass status codes defined in various ways:
- NVMe PCI and Apple drivers pass NVMe status code
- virtio_blk driver passes the virtblk request header status byte
- null_blk driver passes blk_status_t
These codes are either zero or positive, therefore the revised check
fails to function as intended. Specifically, with the NVMe PCI driver,
this modification led to the failure of the blktests test case nvme/039.
In this test scenario, errors are artificially injected to the NVMe
driver, resulting in positive NVMe status codes passed to
blk_mq_add_to_batch(), which unexpectedly processes the failed I/O in a
batch. Hence the failure.
To correct the ioerror check within blk_mq_add_to_batch(), make all
callers to uniformly pass the argument as boolean. Modify the callers to
check their specific status codes and pass the boolean value 'is_error'.
Also describe the arguments of blK_mq_add_to_batch as kerneldoc.
Fixes: 1f47ed294a2b ("block: cleanup and fix batch completion adding conditions")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20250311104359.1767728-3-shinichiro.kawasaki@wdc.com
[axboe: fold in documentation update]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
