| Age | Commit message (Collapse) | Author |
|---|
|
[Why]
GPU reset will attempt to restore cached state, but brightness doesn't
get restored. It will come back at 100% brightness, but userspace thinks
it's the previous value.
[How]
When running resume sequence if GPU is in reset restore brightness
to previous value.
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5e19e2b57b6bb640d68dfc7991e1e182922cf867)
Cc: stable@vger.kernel.org
|
|
[Why]
To avoid flickering during boot default brightness level set by BIOS
should be maintained for as much of the boot as feasible.
commit 2fe87f54abdc ("drm/amd/display: Set default brightness according
to ACPI") attempted to set the right levels for AC vs DC, but brightness
still got reset to maximum level in initialization code for
setup_backlight_device().
[How]
Remove the hardcoded initialization in setup_backlight_device() and
instead program brightness value to match BIOS (AC or DC). This avoids a
brightness flicker from kernel changing the value. Userspace may however
still change it during boot.
Fixes: 2fe87f54abdc ("drm/amd/display: Set default brightness according to ACPI")
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0747acf3311229e22009bec4a9e7fc30c879e842)
Cc: stable@vger.kernel.org
|
|
[Why]
It seems HPD interrupts are enabled by default for all connectors, even
if the hpd source isn't valid. An eDP for example, does not have a valid
hpd source (but does have a valid hpdrx source; see construct_phy()).
Thus, eDPs should have their hpd interrupt disabled.
In the past, this wasn't really an issue. Although the driver gets
interrupted, then acks by writing to hw registers, there weren't any
subscribed handlers that did anything meaningful (see
register_hpd_handlers()).
But things changed with the introduction of IPS. s2idle requires that
the driver allows IPS for DMUB fw to put hw to sleep. Since register
access requires hw to be awake, the driver will block IPS entry to do
so. And no IPS means no hw sleep during s2idle.
This was the observation on DCN35 systems with an eDP. During suspend,
the eDP toggled its hpd pin as part of the panel power down sequence.
The driver was then interrupted, and acked by writing to registers,
blocking IPS entry.
[How]
Since DC marks eDP connections as having invalid hpd sources (see
construct_phy()), DM should disable them at the hw level. Do so in
amdgpu_dm_hpd_init() by disabling all hpd ints first, then selectively
enabling ones for connectors that have valid hpd sources.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7b1ba19eb15f88e70782642ce2d934211269337b)
Cc: stable@vger.kernel.org
|
|
When userspace invokes S4 the flow is:
1) amdgpu_pmops_prepare()
2) amdgpu_pmops_freeze()
3) Create hibernation image
4) amdgpu_pmops_thaw()
5) Write out image to disk
6) Turn off system
Then on resume amdgpu_pmops_restore() is called.
This flow has a problem that because amdgpu_pmops_thaw() is called
it will call amdgpu_device_resume() which will resume all of the GPU.
This includes turning the display hardware back on and discovering
connectors again.
This is an unexpected experience for the display to turn back on.
Adjust the flow so that during the S4 sequence display hardware is
not turned back on.
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2038
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20250306185124.44780-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 68bfdc8dc0a1a7fdd9ab61e69907ae71a6fd3d91)
|
|
Starting from 6.11, AMDGPU driver, while being loaded with amdgpu.dc=1,
due to lack of .is_two_pixels_per_container function in dce60_tg_funcs,
causes a NULL pointer dereference on PCs with old GPUs, such as R9 280X.
So this fix adds missing .is_two_pixels_per_container to dce60_tg_funcs.
Reported-by: Rosen Penev <rosenp@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3942
Fixes: e6a901a00822 ("drm/amd/display: use even ODM slice width for two pixels per container")
Signed-off-by: Aliaksei Urbanski <aliaksei.urbanski@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bd4b125eb949785c6f8a53b0494e32795421209d)
Cc: stable@vger.kernel.org
|
|
We advertise DCC as supported for NV12/P010 formats on GFX12,
but it would fail on this check on atomic commit.
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ba795235a2b99ba9bbef647ab003b2f3145d9bbb)
Cc: stable@vger.kernel.org # 6.12.x
|
|
The check for args->extensions is repeated twice in xe_vm_create_ioctl().
This commit removes the redundant check to streamline the code.
Fixes: 7224788f6756 ("drm/xe: Kill XE_VM_PROPERTY_BIND_OP_ERROR_CAPTURE_ADDRESS extension")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Xin Wang <x.wang@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303004942.951699-1-x.wang@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 8da8aecf1f2d89c2b8188bcf7aa252ec146ddd12)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Raptor Lake-S SoCs notify correctable memory errors via CMCI (Corrected
Machine Check Interrupt). Switch Raptor Lake-S EDAC support from polling
to interrupt mode by registering the callback to the MCE decode notifier
chain.
Note that as Raptor Lake-S SoCs may not recover from uncorrectable memory
errors, the system will hang as soon as this type of error occurs, and the
registered callback on the MCE decode chain will not be executed. This is
the expected behavior.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-12-qiuxu.zhuo@intel.com
|
|
The Intel Raptor Lake-S SoC contains two memory controllers with DDR5
memory type and out-of-band ECC capability. The resource definitions of
the memory controller are different from previous generations. One notable
difference is that the PCI ERRSTS register is deprecated and is not used
to indicate the presence of errors or to clear the MMIO-mapped ECC error
log regsiters.
Extend the ie31200_edac driver to support multiple memory controllers,
add a resource configuration table and use an MSR register to clear the
ECC error log registers to provide EDAC support for Raptor Lake-S SoCs.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-11-qiuxu.zhuo@intel.com
|
|
Split ie31200_probe1() into two helper functions to easily extend support
for multiple memory controllers.
No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-10-qiuxu.zhuo@intel.com
|
|
Fold the two channel loops to simplify the code and improve readability.
Also, delete the comments related to the DRB register, as this register
is not used here.
No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-9-qiuxu.zhuo@intel.com
|
|
The current implementation of the goodix_berlin driver lacks support for
revisions A and B of the Berlin IC. This change adds support for the
gt9897 IC, which is a Berlin-A revision part.
The differences between revision D and A are rather minor, a handful of
address changes and a slightly larger read buffer. They were taken from
the driver published by Goodix, which does a few more things that don't
appear to be necessary for the touchscreen to work properly.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Link: https://lore.kernel.org/r/20250309062315.35720-3-adrian@mainlining.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The current dimm_data structure contains encoded DIMM information,
which needs to be decoded for a given SoC when it is used. Make it
contain decoded information when it's initialized so that the places
where it is used do not need to decode it again, thereby simplifying
the code.
No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-8-qiuxu.zhuo@intel.com
|
|
The resources such as MMIO, register offset, register mask, memory DIMM
information, ECC error log location, etc., of the memory controller, and
the number of memory controllers can be device-ID-specific. It requires
adding numerous 'if (device_id == new_id)' special handling cases to the
code to support a new SoC.
Make these kinds of resources configurable and separate them from the code
to facilitate the addition of new SoC support.
No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-7-qiuxu.zhuo@intel.com
|
|
Use PCI_VDEVICE() to simplify the pci_device_id table.
No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-6-qiuxu.zhuo@intel.com
|
|
The 3rd parameter of *populate_dimm_info() pertains to the DIMM index
within a channel, not the channel index. Fix the parameter name to dimm
to reflect its actual purpose.
No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-5-qiuxu.zhuo@intel.com
|
|
The error path order of ie31200_init() is incorrect, fix it.
Fixes: 709ed1bcef12 ("EDAC/ie31200: Fallback if host bridge device is already initialized")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-4-qiuxu.zhuo@intel.com
|
|
The DIMM size mask for {Sky, Kaby, Coffee} Lake is not bits{7:0},
but bits{5:0}. Fix it.
Fixes: 953dee9bbd24 ("EDAC, ie31200_edac: Add Skylake support")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-3-qiuxu.zhuo@intel.com
|
|
The EDAC_MC_LAYER_CHIP_SELECT layer pertains to the rank, not the DIMM.
Fix its size to reflect the number of ranks instead of the number of DIMMs.
Also delete the unused macros IE31200_{DIMMS,RANKS}.
Fixes: 7ee40b897d18 ("ie31200_edac: Introduce the driver")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-2-qiuxu.zhuo@intel.com
|
|
Need to use the correct IP block type. VCE vs VCN.
Fixes mclk issues on Hawaii.
Suggested by selendym.
Fixes: 82ae6619a450 ("drm/amdgpu: update the handle ptr in wait_for_idle")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3997
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We are trying to get rid of all multiplications from allocation
functions to prevent integer overflows. Here the multiplication is
probably safe, but using kcalloc() is more appropriate and improves
readability. This patch has no effect on runtime behavior.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We are trying to get rid of all multiplications from allocation
functions to prevent integer overflows. Here the multiplication is
probably safe, but using kcalloc() is more appropriate and improves
readability. This patch has no effect on runtime behavior.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We are trying to get rid of all multiplications from allocation
functions to prevent integer overflows. Here the multiplication is
probably safe, but using kcalloc() is more appropriate and improves
readability. This patch has no effect on runtime behavior.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We are trying to get rid of all multiplications from allocation
functions to prevent integer overflows. Here the multiplication is
probably safe, but using kcalloc() is more appropriate and improves
readability. This patch has no effect on runtime behavior.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This version brings along following fixes:
- Fix some Replay/PSR issue
- Fix backlight brightness
- Fix suspend issue
- Fix visual confirm color
- Add scoped mutexes for amdgpu_dm_dhcp
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
1. apply oem panel timing (not only on OLED)
2. remove MIN_DPP_DISP_CLK request in driver.
This fix will apply for dcn31x but not
sync with DML's output.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
enable_assr() has a res variable that only is changed in one block with
no cleanup necessary.
[How]
Remove variable and return early from failure cases.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Guards automatically release mutex when it goes out of scope making
code easier to follow.
[How]
Replace all use of mutex_lock()/mutex_unlock() with guard(mutex).
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
A slab-use-after-free is reported when HDCP is destroyed but the
property_validate_dwork queue is still running.
[How]
Cancel the delayed work when destroying workqueue.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4006
Fixes: da3fd7ac0bcf ("drm/amd/display: Update CP property based on HW query")
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
For some VR headsets with large blanks, it's possible
to overflow the OTG_VSTARTUP_PARAM:VSTARTUP_START
register. This can lead to incorrect DML calculations
and underflow downstream.
[How]
Min the calcualted max_vstartup_lines with the max
value of the register.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
stream->adjust will be overwritten by update->crtc_timing_adjust.
We should set update->crtc_timing_adjust->timing_adjust_pending
and then overwrite stream->adjust.
Reset update->crtc_timing_adjust->timing_adjust_pending after
the assignment.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
In some cases the remain de-tile buffer segments will be greater
than zero if we don't add the non-top pipe to calculate, at
this time the override de-tile buffer size will be valid and used.
But it makes the de-tile buffer segments used finally for all of pipes
exceed the maximum.
[HOW]
Add the non-top pipe to calculate the remain de-tile buffer segments.
Don't set override size to use the average according to pipe count
if the value exceed the maximum.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Sometimes visual confirm color is updated, but the
background color is not changed. This causes visual
confrim to show incorrect colors.
[HOW]
Update background color when visual confirm color changes.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Leo Zeng <Leo.Zeng@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
A warning message "WARNING: CPU: 4 PID: 459 at ... /dc_resource.c:3397
calculate_phy_pix_clks+0xef/0x100 [amdgpu]" occurs because the
display_color_depth == COLOR_DEPTH_141414 is not handled. This is
observed in Radeon RX 6600 XT.
It is fixed by assigning pix_clk * (14 * 3) / 24 - same as the rests.
Also fixes the indentation in get_norm_pix_clk.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
DCN4+ supports a new register based mailbox for sending messages
from host to DMCUB. This mailbox supports 64 byte commands, which makes
it compatible with the same structure as the frame buffer based mailbox.
[HOW]
The intention for reg_inbox0 is to be slot in replacement for the frame
buffer based mailbox (Inbox1). It supports all of the required features:
- Supports all messages handled by FB Inbox1
- Supports multi command batching
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
The clear_dsc_setting at boot logic was based on dcn version
check.
As such new ASIC lost this DSC clear up logic, change the
assumption to BIOS support eDP DSC for new ASIC.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why/How]
DP spec has been updated recently to make regulated autonomous mode more
well-defined. In case any PCON vendors choose to implement regulated
autonomous mode in the future, pre-emptively add handling for the
regulated autonomous mode based on current spec.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
DP tunneling should not abort link train even bandwidth become
too low after downgrade. Otherwise, it would fail compliance test.
[HOW}
Do link train with downgrade settings even bandwidth is not enough
Reviewed-by: Cruise Hung <cruise.hung@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
Vtotal is not applied to HW when handling vsync interrupt.
Make sure vtotal is aligned before enable replay.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Danny Wang <danny.wang@amd.com>
Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The displays currently don't get turned off until after other IP blocks
have been suspended. However turning off the displays first gives a
very visible response that the system is on it's way down.
[How]
Turn off displays in a prepare_suspend() callback instead when possible.
This will help for suspend and hibernate sequences.
The shutdown sequence however will not call prepare() so check whether
the state has been already saved to decide what to do.
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
GPU reset will attempt to restore cached state, but brightness doesn't
get restored. It will come back at 100% brightness, but userspace thinks
it's the previous value.
[How]
When running resume sequence if GPU is in reset restore brightness
to previous value.
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
To avoid flickering during boot default brightness level set by BIOS
should be maintained for as much of the boot as feasible.
commit 2fe87f54abdc ("drm/amd/display: Set default brightness according
to ACPI") attempted to set the right levels for AC vs DC, but brightness
still got reset to maximum level in initialization code for
setup_backlight_device().
[How]
Remove the hardcoded initialization in setup_backlight_device() and
instead program brightness value to match BIOS (AC or DC). This avoids a
brightness flicker from kernel changing the value. Userspace may however
still change it during boot.
Fixes: 2fe87f54abdc ("drm/amd/display: Set default brightness according to ACPI")
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When analyzing some crash dumps, not all of the expected DMUB info was
available, so we want to add in-object storage for this data.
[How]
- dmub_srv_debug (renamed to dmub_timeout_info) is already a member of
dmub_diagnostic_data, therefore keep a dmub_diagnostic_data directly in
dmub_srv
- use dmub_srv->debug when collecting diagnostic info instead of stack
object to allow for easy inspection in crash dumps
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
It seems HPD interrupts are enabled by default for all connectors, even
if the hpd source isn't valid. An eDP for example, does not have a valid
hpd source (but does have a valid hpdrx source; see construct_phy()).
Thus, eDPs should have their hpd interrupt disabled.
In the past, this wasn't really an issue. Although the driver gets
interrupted, then acks by writing to hw registers, there weren't any
subscribed handlers that did anything meaningful (see
register_hpd_handlers()).
But things changed with the introduction of IPS. s2idle requires that
the driver allows IPS for DMUB fw to put hw to sleep. Since register
access requires hw to be awake, the driver will block IPS entry to do
so. And no IPS means no hw sleep during s2idle.
This was the observation on DCN35 systems with an eDP. During suspend,
the eDP toggled its hpd pin as part of the panel power down sequence.
The driver was then interrupted, and acked by writing to registers,
blocking IPS entry.
[How]
Since DC marks eDP connections as having invalid hpd sources (see
construct_phy()), DM should disable them at the hw level. Do so in
amdgpu_dm_hpd_init() by disabling all hpd ints first, then selectively
enabling ones for connectors that have valid hpd sources.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When switching between PSR/Replay,
the DPCD config of previous mode is not cleared,
resulting in unexpected behavior in TCON.
[How]
Initialize the DPCD in setup function
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update pm_update_grace_period() to more cleaner
pm_config_dequeue_wait_counts(). Previously, grace_period variable was
overloaded as a variable and a macro, making it inflexible to configure
additional dequeue wait times.
pm_config_dequeue_wait_counts() now takes in a cmd / variable. This
allows flexibility to update different dequeue wait times.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Open coded arithmetic in allocator arguments is discouraged. Helper
functions like kcalloc or, in this case, kmalloc_array are preferred.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
VCN 2.5 uses the PG callback to enable VCN DPM which is
a global state. As such, we need to make sure all instances
are in the same state.
v2: switch to a ref count (Lijo)
v3: switch to its own idle work handler
v4: fix logic in DPG handling
Fixes: 4ce4fe27205c ("drm/amdgpu/vcn: use per instance callbacks for idle work handler")
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The hw supports it.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The function nvmet_pci_epf_create_cq() always unconditionally calls
nvmet_pci_epf_add_irq_vector() to add an IRQ vector for a completion
queue. But this is not correct if the host requested the creation of a
completion queue for polling, without an IRQ vector specified (i.e. the
flag NVME_CQ_IRQ_ENABLED is not set).
Fix this by calling nvmet_pci_epf_add_irq_vector() and setting the queue
flag NVMET_PCI_EPF_Q_IRQ_ENABLED for the cq only if NVME_CQ_IRQ_ENABLED
is set. While at it, also fix the error path to add the missing removal
of the added IRQ vector if nvmet_cq_create() fails.
Fixes: 0faa0fe6f90e ("nvmet: New NVMe PCI endpoint function target driver")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
