| Age | Commit message (Collapse) | Author |
|---|
|
Print the capacity of the block device when the driver is probed. Many
users expect this since SCSI disks (sd) do it. Moreover, kernel dmesg
output is the primary source of troubleshooting information so it's
helpful to include the disk size there.
The capacity is already printed by virtio_blk when a resize event
occurs. Extract the code and reuse it from virtblk_probe().
This patch also adds the block device name to the message so it can be
correlated with a specific device:
virtio_blk virtio0: [vda] 20971520 512-byte logical blocks (10.7 GB/10.0 GiB)
Cc: Rodrigo A B Freire <rfreire@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
No need to get into the submenu to disable all VIRTIO-related
config entries.
This makes it easier to disable all VIRTIO config options
without entering the submenu. It will also enable one
to see that en/dis-abled state from the outside menu.
This is only intended to change menuconfig UI, not change
the config dependencies.
Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Topic branch for stable KVM clockource under Hyper-V.
Thanks to Christoffer Dall for resolving the ARM conflict.
|
|
Replace License short header by SPDX identifier.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Some headers are not needed since the driver can be built as module.
Remove them.
While here, sort headers alphabetically.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
On some laptop like the Dell Inspiron 7000 series tablet mode switch
implemented in Intel ACPI, the events to enter and exit the tablet mode
are 0xCC and 0xCD
This initializes the tablet/laptop mode at the correct value
if the system booted in tablet mode (or the intel-vbtn module
loaded with the device in tablet mode)
Cc: platform-driver-x86@vger.kernel.org
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: "Pali Rohár" <pali.rohar@gmail.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Stefan Brüns<stefan.bruens@rwth-aachen.de>
Signed-off-by: Marco Martin <notmart@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
[andy: fixed style of comments, indentation, and massaged commit message]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
There is no longer a need for the buffer to be defined in
first 4GB physical address space.
Furthermore there may be race conditions with multiple different functions
working on a module wide buffer causing incorrect results.
Fixes: 549b4930f057658dc50d8010e66219233119a4d8
Suggested-by: Pali Rohar <pali.rohar@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Recently sent patch 'platform/x86: intel_pmc_core: Remove unused EXPORTED
API' missed to remove the header file 'arch/x86/include/asm/pmc_core.h'
which was solely used to declare the EXPORTED API
'intel_pmc_slp_s0_counter_read'. This patch provides the errata fix for the
same.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Undo loop condition on the error path would cause the i counter
to go below zero, if allocation failure happened with the first
(i.e. 0th) element of the array.
Fixes: 395cacb5f1a0 ("netdevsim: bpf: support fake map offload")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Avoids data connection stalls when the client toggles powersave mode
Fixes: aee5b8cf2477 ("mt76: implement A-MPDU rx reordering in the driver code")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Fixes: aee5b8cf2477 ("mt76: implement A-MPDU rx reordering in the driver code")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Avoids timeouts on reordered A-MPDU rx frames
Fixes: aee5b8cf2477 ("mt76: implement A-MPDU rx reordering in the driver code")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
With software A-MPDU reordering in place, frames that notify mac80211 of
powersave changes are reordered as well, which can cause connection
stalls. Fix this by implementing powersave state processing in the
driver.
Fixes: aee5b8cf2477 ("mt76: implement A-MPDU rx reordering in the driver code")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
The last pull request didn't make it to v4.15 (I was too late) so pull it to
wireless-drivers-next.git instead so that it can go to v4.16.
|
|
Prepare input updates for 4.16 merge window.
|
|
Pull documentation updates from Jonathan Corbet:
"Documentation updates for 4.16.
New stuff includes refcount_t documentation, errseq documentation,
kernel-doc support for nested structure definitions, the removal of
lots of crufty kernel-doc support for unused formats, SPDX tag
documentation, the beginnings of a manual for subsystem maintainers,
and lots of fixes and updates.
As usual, some of the changesets reach outside of Documentation/ to
effect kerneldoc comment fixes. It also adds the new LICENSES
directory, of which Thomas promises I do not need to be the
maintainer"
* tag 'docs-4.16' of git://git.lwn.net/linux: (65 commits)
linux-next: docs-rst: Fix typos in kfigure.py
linux-next: DOC: HWPOISON: Fix path to debugfs in hwpoison.txt
Documentation: Fix misconversion of #if
docs: add index entry for networking/msg_zerocopy
Documentation: security/credentials.rst: explain need to sort group_list
LICENSES: Add MPL-1.1 license
LICENSES: Add the GPL 1.0 license
LICENSES: Add Linux syscall note exception
LICENSES: Add the MIT license
LICENSES: Add the BSD-3-clause "Clear" license
LICENSES: Add the BSD 3-clause "New" or "Revised" License
LICENSES: Add the BSD 2-clause "Simplified" license
LICENSES: Add the LGPL-2.1 license
LICENSES: Add the LGPL 2.0 license
LICENSES: Add the GPL 2.0 license
Documentation: Add license-rules.rst to describe how to properly identify file licenses
scripts: kernel_doc: better handle show warnings logic
fs/*/Kconfig: drop links to 404-compliant http://acl.bestbits.at
doc: md: Fix a file name to md-fault.c in fault-injection.txt
errseq: Add to documentation tree
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vmci iov_iter updates from Al Viro:
"Get rid of "is it an iovec or an entire array?" flags in vmxi - just
use iov_iter. Simplifies the living hell out of that code..."
* 'work.vmci' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vmci: the same on the send side...
vmci: simplify qp_dequeue_locked()
vmci: get rid of qp_memcpy_from_queue()
vmci: fix buf_size in case of iovec-based accesses
|
|
Merge updates from Andrew Morton:
- misc fixes
- ocfs2 updates
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
mm: remove PG_highmem description
tools, vm: new option to specify kpageflags file
mm/swap.c: make functions and their kernel-doc agree
mm, memory_hotplug: fix memmap initialization
mm: correct comments regarding do_fault_around()
mm: numa: do not trap faults on shared data section pages.
hugetlb, mbind: fall back to default policy if vma is NULL
hugetlb, mempolicy: fix the mbind hugetlb migration
mm, hugetlb: further simplify hugetlb allocation API
mm, hugetlb: get rid of surplus page accounting tricks
mm, hugetlb: do not rely on overcommit limit during migration
mm, hugetlb: integrate giga hugetlb more naturally to the allocation path
mm, hugetlb: unify core page allocation accounting and initialization
mm/memcontrol.c: try harder to decrease [memory,memsw].limit_in_bytes
mm/memcontrol.c: make local symbol static
mm/hmm: fix uninitialized use of 'entry' in hmm_vma_walk_pmd()
include/linux/mmzone.h: fix explanation of lower bits in the SPARSEMEM mem_map pointer
mm/compaction.c: fix comment for try_to_compact_pages()
mm/page_ext.c: make page_ext_init a noop when CONFIG_PAGE_EXTENSION but nothing uses it
zsmalloc: use U suffix for negative literals being shifted
...
|
|
In the past the ast driver relied upon the fbdev emulation helpers to
call ->load_lut at boot-up. But since
commit b8e2b0199cc377617dc238f5106352c06dcd3fa2
Author: Peter Rosin <peda@axentia.se>
Date: Tue Jul 4 12:36:57 2017 +0200
drm/fb-helper: factor out pseudo-palette
that's cleaned up and drivers are expected to boot into a consistent
lut state. This patch fixes that.
Fixes: b8e2b0199cc3 ("drm/fb-helper: factor out pseudo-palette")
Cc: Peter Rosin <peda@axenita.se>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.14+
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198123
Cc: Bill Fraser <bill.fraser@gmail.com>
Reported-and-Tested-by: Bill Fraser <bill.fraser@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
This contains a fix to restrict what lessee can do with masters and
another one when waiting for timeouts on reservation objects.
* tag 'drm-misc-next-fixes-2018-01-31' of git://anongit.freedesktop.org/drm/drm-misc:
drm: Check for lessee in DROP_MASTER ioctl
dma-buf: fix reservation_object_wait_timeout_rcu once more v2
|
|
Commit 4d4bbd8526a8 ("mm, oom_reaper: skip mm structs with mmu
notifiers") prevented the oom reaper from unmapping private anonymous
memory with the oom reaper when the oom victim mm had mmu notifiers
registered.
The rationale is that doing mmu_notifier_invalidate_range_{start,end}()
around the unmap_page_range(), which is needed, can block and the oom
killer will stall forever waiting for the victim to exit, which may not
be possible without reaping.
That concern is real, but only true for mmu notifiers that have
blockable invalidate_range_{start,end}() callbacks. This patch adds a
"flags" field to mmu notifier ops that can set a bit to indicate that
these callbacks do not block.
The implementation is steered toward an expensive slowpath, such as
after the oom reaper has grabbed mm->mmap_sem of a still alive oom
victim.
[rientjes@google.com: mmu_notifier_invalidate_range_end() can also call the invalidate_range() must not block, fix comment]
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1801091339570.240101@chino.kir.corp.google.com
[akpm@linux-foundation.org: make mm_has_blockable_invalidate_notifiers() return bool, use rwsem_is_locked()]
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1712141329500.74052@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Dimitri Sivanich <sivanich@hpe.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use touchscreen_properties structure instead of implementing all
properties by our own. It allows us to reuse generic code for parsing
device-tree properties (which was implemented manually in the driver for
now). Additionally, it allows us to report events using generic
touchscreen_report_pos(), which automatically handles inverted and
swapped axes.
This fixes the issue with the custom code incorrectly handling case where
ts->inverted_x and ts->swapped_x_y were true, but ts->inverted_y was
false. Assuming we have 720x1280 touch panel, ts->abs_x_max == 1279 and
ts->abs_y_max == 719 (because we inverted that in goodix_read_config()).
Now let's assume that we received event from (0:0) position (in touch
panel original coordinates). In function goodix_ts_report_touch() we
calculate input_x as 1279, but after swapping input_y takes that value
(which is more that maximum 719 value reported during initialization).
Note that since touchscreen coordinates are 0-indexed, we now report
touchscreen range as (0:size-1).
Developed and tested on custom DT-based device with gt1151 touch
panel.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
[dtor: fix endianness annotation reported by sparse, handle errors when
initializing MT slots]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
It's 'MMS114_INFORMATION', not 'MMS114_INFOMATION'
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Pull networking updates from David Miller:
1) Significantly shrink the core networking routing structures. Result
of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf
2) Add netdevsim driver for testing various offloads, from Jakub
Kicinski.
3) Support cross-chip FDB operations in DSA, from Vivien Didelot.
4) Add a 2nd listener hash table for TCP, similar to what was done for
UDP. From Martin KaFai Lau.
5) Add eBPF based queue selection to tun, from Jason Wang.
6) Lockless qdisc support, from John Fastabend.
7) SCTP stream interleave support, from Xin Long.
8) Smoother TCP receive autotuning, from Eric Dumazet.
9) Lots of erspan tunneling enhancements, from William Tu.
10) Add true function call support to BPF, from Alexei Starovoitov.
11) Add explicit support for GRO HW offloading, from Michael Chan.
12) Support extack generation in more netlink subsystems. From Alexander
Aring, Quentin Monnet, and Jakub Kicinski.
13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From
Russell King.
14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso.
15) Many improvements and simplifications to the NFP driver bpf JIT,
from Jakub Kicinski.
16) Support for ipv6 non-equal cost multipath routing, from Ido
Schimmel.
17) Add resource abstration to devlink, from Arkadi Sharshevsky.
18) Packet scheduler classifier shared filter block support, from Jiri
Pirko.
19) Avoid locking in act_csum, from Davide Caratti.
20) devinet_ioctl() simplifications from Al viro.
21) More TCP bpf improvements from Lawrence Brakmo.
22) Add support for onlink ipv6 route flag, similar to ipv4, from David
Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits)
tls: Add support for encryption using async offload accelerator
ip6mr: fix stale iterator
net/sched: kconfig: Remove blank help texts
openvswitch: meter: Use 64-bit arithmetic instead of 32-bit
tcp_nv: fix potential integer overflow in tcpnv_acked
r8169: fix RTL8168EP take too long to complete driver initialization.
qmi_wwan: Add support for Quectel EP06
rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK
ipmr: Fix ptrdiff_t print formatting
ibmvnic: Wait for device response when changing MAC
qlcnic: fix deadlock bug
tcp: release sk_frag.page in tcp_disconnect
ipv4: Get the address of interface correctly.
net_sched: gen_estimator: fix lockdep splat
net: macb: Handle HRESP error
net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring
ipv6: addrconf: break critical section in addrconf_verify_rtnl()
ipv6: change route cache aging logic
i40e/i40evf: Update DESC_NEEDED value to reflect larger value
bnxt_en: cleanup DIM work on device shutdown
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Enforce the setting of keys for keyed aead/hash/skcipher
algorithms.
- Add multibuf speed tests in tcrypt.
Algorithms:
- Improve performance of sha3-generic.
- Add native sha512 support on arm64.
- Add v8.2 Crypto Extentions version of sha3/sm3 on arm64.
- Avoid hmac nesting by requiring underlying algorithm to be unkeyed.
- Add cryptd_max_cpu_qlen module parameter to cryptd.
Drivers:
- Add support for EIP97 engine in inside-secure.
- Add inline IPsec support to chelsio.
- Add RevB core support to crypto4xx.
- Fix AEAD ICV check in crypto4xx.
- Add stm32 crypto driver.
- Add support for BCM63xx platforms in bcm2835 and remove bcm63xx.
- Add Derived Key Protocol (DKP) support in caam.
- Add Samsung Exynos True RNG driver.
- Add support for Exynos5250+ SoCs in exynos PRNG driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (166 commits)
crypto: picoxcell - Fix error handling in spacc_probe()
crypto: arm64/sha512 - fix/improve new v8.2 Crypto Extensions code
crypto: arm64/sm3 - new v8.2 Crypto Extensions implementation
crypto: arm64/sha3 - new v8.2 Crypto Extensions implementation
crypto: testmgr - add new testcases for sha3
crypto: sha3-generic - export init/update/final routines
crypto: sha3-generic - simplify code
crypto: sha3-generic - rewrite KECCAK transform to help the compiler optimize
crypto: sha3-generic - fixes for alignment and big endian operation
crypto: aesni - handle zero length dst buffer
crypto: artpec6 - remove select on non-existing CRYPTO_SHA384
hwrng: bcm2835 - Remove redundant dev_err call in bcm2835_rng_probe()
crypto: stm32 - remove redundant dev_err call in stm32_cryp_probe()
crypto: axis - remove unnecessary platform_get_resource() error check
crypto: testmgr - test misuse of result in ahash
crypto: inside-secure - make function safexcel_try_push_requests static
crypto: aes-generic - fix aes-generic regression on powerpc
crypto: chelsio - Fix indentation warning
crypto: arm64/sha1-ce - get rid of literal pool
crypto: arm64/sha2-ce - move the round constant table to .rodata section
...
|
|
In the function rxe_av_fill_ip_info, the parameter rxe is not used.
So it is removed.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The function rxe_av_fill_ip_info always returns 0. So the function
type is changed to void.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Since the function rxe_av_to_attr always return 0, the function
type is changed to void.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
In the function rxe_av_to_attr, the parameter rxe is
not used. So it is removed.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The function rxe_av_from_attr always return 0. So change the
function to void.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
In the function rxe_av_from_attr, the parameter rxe
is not used. So it is removed.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
We should return -ENOMEM if the allocation fails. (The current code
returns succees).
Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-By: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
If there is ever any error while creating srq->umem, we return that
error, we don't store it in srq->umem, so any check of srq->umem for
IS_ERR is pointless. Further, checking udata is unnecessary as
srq->umem is always either NULL or valid, without respect to udata.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull tpm updates from James Morris:
- reduce polling delays in tpm_tis
- support retrieving TPM 2.0 Event Log through EFI before
ExitBootServices
- replace tpm-rng.c with a hwrng device managed by the driver for each
TPM device
- TPM resource manager synthesizes TPM_RC_COMMAND_CODE response instead
of returning -EINVAL for unknown TPM commands. This makes user space
more sound.
- CLKRUN fixes:
* Keep #CLKRUN disable through the entier TPM command/response flow
* Check whether #CLKRUN is enabled before disabling and enabling it
again because enabling it breaks PS/2 devices on a system where it
is disabled
* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
tpm: remove unused variables
tpm: remove unused data fields from I2C and OF device ID tables
tpm: only attempt to disable the LPC CLKRUN if is already enabled
tpm: follow coding style for variable declaration in tpm_tis_core_init()
tpm: delete the TPM_TIS_CLK_ENABLE flag
tpm: Update MAINTAINERS for Jason Gunthorpe
tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()
tpm_tis: Move ilb_base_addr to tpm_tis_data
tpm2-cmd: allow more attempts for selftest execution
tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented
tpm: Move Linux RNG connection to hwrng
tpm: use struct tpm_chip for tpm_chip_find_get()
tpm: parse TPM event logs based on EFI table
efi: call get_event_log before ExitBootServices
tpm: add event log format version
tpm: rename event log provider files
tpm: move tpm_eventlog.h outside of drivers folder
tpm: use tpm_msleep() value as max delay
tpm: reduce tpm polling delay in tpm_tis_core
tpm: move wait_for_tpm_stat() to respective driver files
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:
- remove hid_have_special_driver[] entry hard requirement for any newly
supported VID/PID by a specific non-core hid driver, and general
related cleanup of HID matching core, from Benjamin Tissoires
- support for new Wacom devices and a few small fixups for already
supported ones in Wacom driver, from Aaron Armstrong Skomra and Jason
Gerecke
- sysfs interface fix for roccat driver from Dan Carpenter
- support for new Asus HW (T100TAF, T100HA, T200TA) from Hans de Goede
- improved support for Jabra devices, from Niels Skou Olsen
- other assorted small fixes and new device IDs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (30 commits)
HID: quirks: Fix keyboard + touchpad on Toshiba Click Mini not working
HID: roccat: prevent an out of bounds read in kovaplus_profile_activated()
HID: asus: Fix special function keys on T200TA
HID: asus: Add touchpad max x/y and resolution info for the T200TA
HID: wacom: Add support for One by Wacom (CTL-472 / CTL-672)
HID: wacom: Fix reporting of touch toggle (WACOM_HID_WD_MUTE_DEVICE) events
HID: intel-ish-hid: Enable Cannon Lake and Coffee Lake laptop/desktop
HID: elecom: rewrite report fixup for EX-G and future mice
HID: sony: Report DS4 version info through sysfs
HID: sony: Print reversed MAC address via %pMR
HID: wacom: EKR: ensure devres groups at higher indexes are released
HID: rmi: Support the Fujitsu R726 Pad dock using hid-rmi
HID: add quirk for another PIXART OEM mouse used by HP
HID: quirks: make array hid_quirks static
HID: hid-multitouch: support fine-grain orientation reporting
HID: asus: Add product-id for the T100TAF and T100HA keyboard docks
HID: elo: clear BTN_LEFT mapping
HID: multitouch: Combine all left-button events in a frame
HID: multitouch: Only look at non touch fields in first packet of a frame
HID: multitouch: Properly deal with Win8 PTP reports with 0 touches
...
|
|
Pull IPMI updates from Corey Minyard:
"Small fixes for various things, been sitting in next for a while (some
a long time)"
* tag 'for-linus-4.16-1' of git://github.com/cminyard/linux-ipmi:
ipmi_ssif: Remove duplicate NULL check
ipmi/powernv: Fix error return code in ipmi_powernv_probe()
ipmi: use dynamic memory for DMI driver override
ipmi/ipmi_powernv: remove outdated todo in powernv IPMI driver
ipmi: Clear smi_info->thread to prevent use-after-free during module unload
ipmi: use correct string length
ipmi_si: Fix error handling of platform device
ipmi watchdog: fix typo in parameter description
ipmi_si_platform: Fix typo in parameter description
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
- bq27xxx: add bq27521 support
- drop unused imx-snvs-poweroff driver
- improve axp288 driver
- misc fixes
* tag 'for-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits)
power: supply: max17042_battery: Always fall back to default platform-data
power: supply: max17042_battery: Check battery current for status when supplied
MAINTAINERS: Add AXP288 PMIC entry
power: supply: axp288_fuel_gauge: Do not register our psy on (some) HDMI sticks
power: supply: axp288_fuel_gauge: Optimize get_current()
power: supply: axp288_fuel_gauge: Rework get_status()
power: reset: account for const type of of_device_id.data
power: supply: account for const type of of_device_id.data
bq24190: Simplify code in property_is_writeable
power: supply: axp288_fuel_gauge: Get iio-channels once during boot
power: supply: axp288_charger: Properly stop work on probe-error / remove
power: supply: axp288_charger: Simplify extcon cable handling
power: supply: axp288_charger: Use the right property for the input current limit
power: supply: axp288_charger: Pick lower input current limit not higher
power: supply: axp288_charger: Do not cache input current limit value
power: supply: axp288_charger: Remove no longer needed locking
power: supply: axp288_charger: Use regmap_update_bits to set the input limits
power: supply: axp288_charger: Cleanup some double empty lines
power: supply: axp288_charger: Remove charger-enabled state tracking
power: supply: axp288_charger: Add missing newlines to some messages
...
|
|
Add hotplug platform driver un-registration in case regmap cache
synchronization failed. In such case hotplug platform driver
registration should be rolled back.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HSI update from Sebastian Reichel:
"Y2038 fix for cmt-speech"
* tag 'hsi-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: cmt_speech: use timespec64 instead of timespec
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"The is the bulk of GPIO changes for the v4.16 kernel cycle. It is
pretty calm this time around I think. I even got time to get to things
like starting to clean up header includes.
Core changes:
- Disallow open drain and open source flags to be set simultaneously.
This doesn't make electrical sense, and would the hardware actually
respond to this setting, the result would be short circuit.
- ACPI GPIO has a new core infrastructure for handling quirks. The
quirks are there to deal with broken ACPI tables centrally instead
of pushing the work to individual drivers. In the world of BIOS
writers, the ACPI tables are perfect. Until they find a mistake in
it. When such a mistake is found, we can patch it with a quirk. It
should never happen, the problem is that it happens. So we
accomodate for it.
- Several documentation updates.
- Revert the patch setting up initial direction state from reading
the device. This was causing bad things for drivers that can't read
status on all its pins. It is only affecting debugfs information
quality.
- Label descriptors with the device name if no explicit label is
passed in.
- Pave the ground for transitioning SPI and regulators to use GPIO
descriptors by implementing some quirks in the device tree GPIO
parsing code.
New drivers:
- New driver for the Access PCIe IDIO 24 family.
Other:
- Major refactorings and improvements to the GPIO mockup driver used
for test and verification.
- Moved the AXP209 driver over to pin control since it gained a pin
control back-end. These patches will appear (with the same hashes)
in the pin control pull request as well.
- Convert the onewire GPIO driver w1-gpio to use descriptors. This is
merged here since the W1 maintainers send very few pull requests
and he ACKed it.
- Start to clean up driver headers using <linux/gpio.h> to just use
<linux/gpio/driver.h> as appropriate"
* tag 'gpio-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (103 commits)
gpio: Timestamp events in hardirq handler
gpio: Fix kernel stack leak to userspace
gpio: Fix a documentation spelling mistake
gpio: Documentation update
gpiolib: remove redundant initialization of pointer desc
gpio: of: Fix NPE from OF flags
gpio: stmpe: Delete an unnecessary variable initialisation in stmpe_gpio_probe()
gpio: stmpe: Move an assignment in stmpe_gpio_probe()
gpio: stmpe: Improve a size determination in stmpe_gpio_probe()
gpio: stmpe: Use seq_putc() in stmpe_dbg_show()
gpio: No NULL owner
gpio: stmpe: i2c transfer are forbiden in atomic context
gpio: davinci: Include proper header
gpio: da905x: Include proper header
gpio: cs5535: Include proper header
gpio: crystalcove: Include proper header
gpio: bt8xx: Include proper header
gpio: bcm-kona: Include proper header
gpio: arizona: Include proper header
gpio: amd8111: Include proper header
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"New LED class driver:
- introduce LM3692x dual string driver
New LED trigger:
- introduce a NETDEV trigger
leds-lp8860:
- various fixes to align with LED framework
- add regulator enable during init
- DT support related improvements
Minor fixes and cleanups to the LED class drivers:
- leds-pwm
- ledtrig-activity
- leds-blinkm
- leds-as3645a
- ledtrig-transient"
* tag 'leds_for_4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: ledtrig-transient: Add SPDX license identifiers
leds: lp8860: Various fixes to align with LED framework
leds: lp8860: Add DT parsing to retrieve the trigger node
dt: bindings: lp8860: Add trigger binding to the lp8860
leds: lp8860: Update the dt parsing for LED labeling
dt: bindings: lp8860: Update DT label binding
dt: bindings: lp8860: Update bindings for lp8860
leds: as3645a: Fix line over 80 characters
leds: as3645a: Fix quoted string split warning
leds: lm3692x: Introduce LM3692x dual string driver
dt: bindings: lm3692x: Add bindings for lm3692x LED driver
leds: trigger: Introduce a NETDEV trigger
leds: blinkm: avoid uninitialized data use
ledtrig-activity: Grammar s/a immediate/an immediate/
leds: pwm: Remove unneeded header file
leds: lp8860: Add regulator enable during init
leds: lp8860: Fix linuxdoc format for structure
|
|
Pull RDMA subsystem updates from Jason Gunthorpe:
"Overall this cycle did not have any major excitement, and did not
require any shared branch with netdev.
Lots of driver updates, particularly of the scale-up and performance
variety. The largest body of core work was Parav's patches fixing and
restructing some of the core code to make way for future RDMA
containerization.
Summary:
- misc small driver fixups to
bnxt_re/hfi1/qib/hns/ocrdma/rdmavt/vmw_pvrdma/nes
- several major feature adds to bnxt_re driver: SRIOV VF RoCE
support, HugePages support, extended hardware stats support, and
SRQ support
- a notable number of fixes to the i40iw driver from debugging scale
up testing
- more work to enable the new hip08 chip in the hns driver
- misc small ULP fixups to srp/srpt//ipoib
- preparation for srp initiator and target to support the RDMA-CM
protocol for connections
- add RDMA-CM support to srp initiator, srp target is still a WIP
- fixes for a couple of places where ipoib could spam the dmesg log
- fix encode/decode of FDR/EDR data rates in the core
- many patches from Parav with ongoing work to clean up
inconsistencies and bugs in RoCE support around the rdma_cm
- mlx5 driver support for the userspace features 'thread domain',
'wallclock timestamps' and 'DV Direct Connected transport'. Support
for the firmware dual port rocee capability
- core support for more than 32 rdma devices in the char dev
allocation
- kernel doc updates from Randy Dunlap
- new netlink uAPI for inspecting RDMA objects similar in spirit to 'ss'
- one minor change to the kobject code acked by Greg KH"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (259 commits)
RDMA/nldev: Provide detailed QP information
RDMA/nldev: Provide global resource utilization
RDMA/core: Add resource tracking for create and destroy PDs
RDMA/core: Add resource tracking for create and destroy CQs
RDMA/core: Add resource tracking for create and destroy QPs
RDMA/restrack: Add general infrastructure to track RDMA resources
RDMA/core: Save kernel caller name when creating PD and CQ objects
RDMA/core: Use the MODNAME instead of the function name for pd callers
RDMA: Move enum ib_cq_creation_flags to uapi headers
IB/rxe: Change RDMA_RXE kconfig to use select
IB/qib: remove qib_keys.c
IB/mthca: remove mthca_user.h
RDMA/cm: Fix access to uninitialized variable
RDMA/cma: Use existing netif_is_bond_master function
IB/core: Avoid SGID attributes query while converting GID from OPA to IB
RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failure
IB/umad: Fix use of unprotected device pointer
IB/iser: Combine substrings for three messages
IB/iser: Delete an unnecessary variable initialisation in iser_send_data_out()
IB/iser: Delete an error message for a failed memory allocation in iser_send_data_out()
...
|
|
Pull dmaengine updates from Vinod Koul:
"This time is smallish update with updates mainly to drivers:
- updates to xilinx and zynqmp dma controllers
- update reside calculation for rcar controller
- more RSTify fixes for documentation
- add support for race free transfer termination and updating for
users for that
- support for new rev of hidma with addition new APIs to get device
match data in ACPI/OF
- random updates to bunch of other drivers"
* tag 'dmaengine-4.16-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (47 commits)
dmaengine: dmatest: fix container_of member in dmatest_callback
dmaengine: stm32-dmamux: Remove unnecessary platform_get_resource() error check
dmaengine: sprd: statify 'sprd_dma_prep_dma_memcpy'
dmaengine: qcom_hidma: simplify DT resource parsing
dmaengine: xilinx_dma: Free BD consistent memory
dmaengine: xilinx_dma: Fix warning variable prev set but not used
dmaengine: xilinx_dma: properly configure the SG mode bit in the driver for cdma
dmaengine: doc: format struct fields using monospace
dmaengine: doc: fix bullet list formatting
dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63
dmaengine: cppi41: Fix channel queues array size check
dmaengine: imx-sdma: Add MODULE_FIRMWARE
dmaengine: xilinx_dma: Fix typos
dmaengine: xilinx_dma: Differentiate probe based on the ip type
dmaengine: xilinx_dma: fix style issues from checkpatch
dmaengine: xilinx_dma: Fix kernel doc warnings
dmaengine: xilinx_dma: Fix race condition in the driver for multiple descriptor scenario
dmaeninge: xilinx_dma: Fix bug in multiple frame stores scenario in vdma
dmaengine: xilinx_dma: Check for channel idle state before submitting dma descriptor
dmaengine: zynqmp_dma: Fix race condition in the probe
...
|
|
Pull dma mapping updates from Christoph Hellwig:
"Except for a runtime warning fix from Christian this is all about
consolidation of the generic no-IOMMU code, a well as the glue code
for swiotlb.
All the code is based on the x86 implementation with hooks to allow
all architectures that aren't cache coherent to use it.
The x86 conversion itself has been deferred because the x86
maintainers were a little busy in the last months"
* tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mapping: (57 commits)
MAINTAINERS: add the iommu list for swiotlb and xen-swiotlb
arm64: use swiotlb_alloc and swiotlb_free
arm64: replace ZONE_DMA with ZONE_DMA32
mips: use swiotlb_{alloc,free}
mips/netlogic: remove swiotlb support
tile: use generic swiotlb_ops
tile: replace ZONE_DMA with ZONE_DMA32
unicore32: use generic swiotlb_ops
ia64: remove an ifdef around the content of pci-dma.c
ia64: clean up swiotlb support
ia64: use generic swiotlb_ops
ia64: replace ZONE_DMA with ZONE_DMA32
swiotlb: remove various exports
swiotlb: refactor coherent buffer allocation
swiotlb: refactor coherent buffer freeing
swiotlb: wire up ->dma_supported in swiotlb_dma_ops
swiotlb: add common swiotlb_map_ops
swiotlb: rename swiotlb_free to swiotlb_exit
x86: rename swiotlb_dma_ops
powerpc: rename swiotlb_dma_ops
...
|
|
Pull SCSI updates from James Bottomley:
"This is mostly updates of the usual driver suspects: arcmsr,
scsi_debug, mpt3sas, lpfc, cxlflash, qla2xxx, aacraid, megaraid_sas,
hisi_sas.
We also have a rework of the libsas hotplug handling to make it more
robust, a slew of 32 bit time conversions and fixes, and a host of the
usual minor updates and style changes. The biggest potential for
regressions is the libsas hotplug changes, but so far they seem stable
under testing"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (313 commits)
scsi: qla2xxx: Fix logo flag for qlt_free_session_done()
scsi: arcmsr: avoid do_gettimeofday
scsi: core: Add VENDOR_SPECIFIC sense code definitions
scsi: qedi: Drop cqe response during connection recovery
scsi: fas216: fix sense buffer initialization
scsi: ibmvfc: Remove unneeded semicolons
scsi: hisi_sas: fix a bug in hisi_sas_dev_gone()
scsi: hisi_sas: directly attached disk LED feature for v2 hw
scsi: hisi_sas: devicetree: bindings: add LED feature for v2 hw
scsi: megaraid_sas: NVMe passthrough command support
scsi: megaraid: use ktime_get_real for firmware time
scsi: fnic: use 64-bit timestamps
scsi: qedf: Fix error return code in __qedf_probe()
scsi: devinfo: fix format of the device list
scsi: qla2xxx: Update driver version to 10.00.00.05-k
scsi: qla2xxx: Add XCB counters to debugfs
scsi: qla2xxx: Fix queue ID for async abort with Multiqueue
scsi: qla2xxx: Fix warning for code intentation in __qla24xx_handle_gpdb_event()
scsi: qla2xxx: Fix warning during port_name debug print
scsi: qla2xxx: Fix warning in qla2x00_async_iocb_timeout()
...
|
|
Missing prefix 'pn' in MODULE_ALIAS lines causes the module to
not load automatically. The driver should use MODULE_DEVICE_TABLE
together with existing mlxplat_dmi_table instead.
Fixes: 6613d18e9038 ("platform/x86: mlx-platform: Move module from arch/x86")
Cc: Vadim Pasternak <vadimp@mellanox.com>
Cc: Bjørn Mork <bjorn@mork.no>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- DM core fixes to ensure that bio submission follows a depth-first
tree walk; this is critical to allow forward progress without the
need to use the bioset's BIOSET_NEED_RESCUER.
- Remove DM core's BIOSET_NEED_RESCUER based dm_offload infrastructure.
- DM core cleanups and improvements to make bio-based DM more efficient
(e.g. reduced memory footprint as well leveraging per-bio-data more).
- Introduce new bio-based mode (DM_TYPE_NVME_BIO_BASED) that leverages
the more direct IO submission path in the block layer; this mode is
used by DM multipath and also optimizes targets like DM thin-pool
that stack directly on NVMe data device.
- DM multipath improvements to factor out legacy SCSI-only (e.g.
scsi_dh) code paths to allow for more optimized support for NVMe
multipath.
- A fix for DM multipath path selectors (service-time and queue-length)
to select paths in a more balanced way; largely academic but doesn't
hurt.
- Numerous DM raid target fixes and improvements.
- Add a new DM "unstriped" target that enables Intel to workaround
firmware limitations in some NVMe drives that are striped internally
(this target also works when stacked above the DM "striped" target).
- Various Documentation fixes and improvements.
- Misc cleanups and fixes across various DM infrastructure and targets
(e.g. bufio, flakey, log-writes, snapshot).
* tag 'for-4.16/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (69 commits)
dm cache: Documentation: update default migration_throttling value
dm mpath selector: more evenly distribute ties
dm unstripe: fix target length versus number of stripes size check
dm thin: fix trailing semicolon in __remap_and_issue_shared_cell
dm table: fix NVMe bio-based dm_table_determine_type() validation
dm: various cleanups to md->queue initialization code
dm mpath: delay the retry of a request if the target responded as busy
dm mpath: return DM_MAPIO_DELAY_REQUEUE if QUEUE_IO or PG_INIT_REQUIRED
dm mpath: return DM_MAPIO_REQUEUE on blk-mq rq allocation failure
dm log writes: fix max length used for kstrndup
dm: backfill missing calls to mutex_destroy()
dm snapshot: use mutex instead of rw_semaphore
dm flakey: check for null arg_name in parse_features()
dm thin: extend thinpool status format string with omitted fields
dm thin: fixes in thin-provisioning.txt
dm thin: document representation of <highest mapped sector> when there is none
dm thin: fix documentation relative to low water mark threshold
dm cache: be consistent in specifying sectors and SI units in cache.txt
dm cache: delete obsoleted paragraph in cache.txt
dm cache: fix grammar in cache-policies.txt
...
|
|
Pull MD updates from Shaohua Li:
"Some small fixes for MD:
- fix raid5-cache potential problems if raid5 cache isn't fully
recovered
- fix a wait-within-wait warning in raid1/10
- make raid5-PPL support disks with writeback cache enabled"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
raid5-ppl: PPL support for disks with write-back cache enabled
md/r5cache: print more info of log recovery
md/raid1,raid10: silence warning about wait-within-wait
md: introduce new personality funciton start()
|
|
Verify before creation of hotplug device if the associated adapter number
is negative. It could be in case hotplug event is not associated with
hotplug device.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
Add definitions for hotplug device masks and events offsets, in order to
specify explicitly all hardware registers allowed for IO operations for
all the drivers sharing register map with mlx-platform.
Extend register map configuration with the sets of writable, readable and
volatile registers to allow verification prior to the access. It prevents
unexpected access to hardware registers by the drivers, sharing register
map with mlx-platform.
Extend register map configuration with cache type field in order to have
ability to cache hardware register value, where possible. Use simple flat
array type for register lookups, which is most suitable in case when the
number of the registers is not too large.
Add at the end of probing routine calls to regcache_mark_dirty and
regcache_sync in order to sync register cache with hardware values. The
first routine indicate that hardware registers value required sync, the
second performs sync.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
