summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-03-04IB/rdmavt: Fix loopback send with invalidate orderingMike Marciniszyn
The IBTA spec notes: o9-5.2.1: For any HCA which supports SEND with Invalidate, upon receiving an IETH, the Invalidate operation must not take place until after the normal transport header validation checks have been successfully completed. The rdmavt loopback code does the validation after the invalidate. Fix by relocating the operation specific logic for all SEND variants until after the validity checks. Cc: <stable@vger.kernel.org> #v4.20+ Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-04IB/iser: Fix dma_nents type definitionMax Gurtovoy
The retured value from ib_dma_map_sg saved in dma_nents variable. To avoid future mismatch between types, define dma_nents as an integer instead of unsigned. Fixes: 57b26497fabe ("IB/iser: Pass the correct number of entries for dma mapped SGL") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Israel Rukshin <israelr@mellanox.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-04sky2: Disable MSI on Dell Inspiron 1545 and Gateway P-79Kai-Heng Feng
Some sky2 chips fire IRQ after S3, before the driver is fully resumed: [ 686.804877] do_IRQ: 1.37 No irq handler for vector This is likely a platform bug that device isn't fully quiesced during S3. Use MSI-X, maskable MSI or INTx can prevent this issue from happening. Since MSI-X and maskable MSI are not supported by this device, fallback to use INTx on affected platforms. BugLink: https://bugs.launchpad.net/bugs/1807259 BugLink: https://bugs.launchpad.net/bugs/1809843 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04rtc: pic32: convert to SPDX identifierAlexandre Belloni
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-04rtc: pic32: let the core handle rangeAlexandre Belloni
Let the core handle the RTC range instead of open coding it. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-04rtc: pic32: convert to devm_rtc_allocate_deviceAlexandre Belloni
This allows further improvement of the driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-04rtc: update my email addressAlexandre Belloni
Use my current email address. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-04rtc: rv8803: convert to SPDX identifierAlexandre Belloni
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-04rtc: rv8803: let the core handle rangeAlexandre Belloni
Let the core handle the RTC range instead of open coding it. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-04rtc: tx4939: convert to SPDX identifierAlexandre Belloni
Use SPDX-License-Identifier instead of a verbose license text. The original text refers to the COPYING file in the main directory which is GPL v2 only so also update MODULE_LICENSE() to "GPL v2" instead of "GPL". Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-04net/mlx5e: Update tx reporter status in case channels were successfully openedEran Ben Elisha
Once channels were successfully opened, update tx reporter health state to healthy. This is needed for the following scenario: - SQ has an un-recovered error reported to the devlink health, resulting tx reporter state to be error. - Current channels (including this SQ) are closed - New channels are opened After that flow, the original error was "solved", and tx reporter state should be healthy. However, as it was resolved as a side effect, and not via tx reporter recover method, driver needs to inform devlink health about it. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04team: Free BPF filter when unregistering netdevIdo Schimmel
When team is used in loadbalance mode a BPF filter can be used to provide a hash which will determine the Tx port. When the netdev is later unregistered the filter is not freed which results in memory leaks [1]. Fix by freeing the program and the corresponding filter when unregistering the netdev. [1] unreferenced object 0xffff8881dbc47cc8 (size 16): comm "teamd", pid 3068, jiffies 4294997779 (age 438.247s) hex dump (first 16 bytes): a3 00 6b 6b 6b 6b 6b 6b 88 a5 82 e1 81 88 ff ff ..kkkkkk........ backtrace: [<000000008a3b47e3>] team_nl_cmd_options_set+0x88f/0x11b0 [<00000000c4f4f27e>] genl_family_rcv_msg+0x78f/0x1080 [<00000000610ef838>] genl_rcv_msg+0xca/0x170 [<00000000a281df93>] netlink_rcv_skb+0x132/0x380 [<000000004d9448a2>] genl_rcv+0x29/0x40 [<000000000321b2f4>] netlink_unicast+0x4c0/0x690 [<000000008c25dffb>] netlink_sendmsg+0x929/0xe10 [<00000000068298c5>] sock_sendmsg+0xc8/0x110 [<0000000082a61ff0>] ___sys_sendmsg+0x77a/0x8f0 [<00000000663ae29d>] __sys_sendmsg+0xf7/0x250 [<0000000027c5f11a>] do_syscall_64+0x14d/0x610 [<000000006cfbc8d3>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<00000000e23197e2>] 0xffffffffffffffff unreferenced object 0xffff8881e182a588 (size 2048): comm "teamd", pid 3068, jiffies 4294997780 (age 438.247s) hex dump (first 32 bytes): 20 00 00 00 02 00 00 00 30 00 00 00 28 f0 ff ff .......0...(... 07 00 00 00 00 00 00 00 28 00 00 00 00 00 00 00 ........(....... backtrace: [<000000002daf01fb>] lb_bpf_func_set+0x45c/0x6d0 [<000000008a3b47e3>] team_nl_cmd_options_set+0x88f/0x11b0 [<00000000c4f4f27e>] genl_family_rcv_msg+0x78f/0x1080 [<00000000610ef838>] genl_rcv_msg+0xca/0x170 [<00000000a281df93>] netlink_rcv_skb+0x132/0x380 [<000000004d9448a2>] genl_rcv+0x29/0x40 [<000000000321b2f4>] netlink_unicast+0x4c0/0x690 [<000000008c25dffb>] netlink_sendmsg+0x929/0xe10 [<00000000068298c5>] sock_sendmsg+0xc8/0x110 [<0000000082a61ff0>] ___sys_sendmsg+0x77a/0x8f0 [<00000000663ae29d>] __sys_sendmsg+0xf7/0x250 [<0000000027c5f11a>] do_syscall_64+0x14d/0x610 [<000000006cfbc8d3>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<00000000e23197e2>] 0xffffffffffffffff Fixes: 01d7f30a9f96 ("team: add loadbalance mode") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04isdn: mISDN: Fix potential NULL pointer dereference of kzallocAditya Pakki
Allocating memory via kzalloc for phi may fail and causes a NULL pointer dereference. This patch avoids such a scenario. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04net: dsa: mv88e6xxx: support in-band signalling on SGMII ports with external ↵Heiner Kallweit
PHYs If an external PHY is connected via SGMII and uses in-band signalling then the auto-negotiated values aren't propagated to the port, resulting in a broken link. See discussion in [0]. This patch adds this propagation. We need to call mv88e6xxx_port_setup_mac(), therefore export it from chip.c. Successfully tested on a ZII DTU with 88E6390 switch and an Aquantia AQCS109 PHY connected via SGMII to port 9. [0] https://marc.info/?t=155130287200001&r=1&w=2 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04get rid of legacy 'get_ds()' functionLinus Torvalds
Every in-kernel use of this function defined it to KERNEL_DS (either as an actual define, or as an inline function). It's an entirely historical artifact, and long long long ago used to actually read the segment selector valueof '%ds' on x86. Which in the kernel is always KERNEL_DS. Inspired by a patch from Jann Horn that just did this for a very small subset of users (the ones in fs/), along with Al who suggested a script. I then just took it to the logical extreme and removed all the remaining gunk. Roughly scripted with git grep -l '(get_ds())' -- :^tools/ | xargs sed -i 's/(get_ds())/(KERNEL_DS)/' git grep -lw 'get_ds' -- :^tools/ | xargs sed -i '/^#define get_ds()/d' plus manual fixups to remove a few unusual usage patterns, the couple of inline function cases and to fix up a comment that had become stale. The 'get_ds()' function remains in an x86 kvm selftest, since in user space it actually does something relevant. Inspired-by: Jann Horn <jannh@google.com> Inspired-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-04cxgb4/chtls: Prefix adapter flags with CXGB4Arjun Vynipadath
Some of these macros were conflicting with global namespace, hence prefixing them with CXGB4. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04mellanox: Switch to bitmap_zalloc()Andy Shevchenko
Switch to bitmap_zalloc() to show clearly what we are allocating. Besides that it returns pointer of bitmap type instead of opaque void *. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04Merge branch 'spi-5.1' into spi-nextMark Brown
2019-03-04Merge branch 'spi-5.0' into spi-linusMark Brown
2019-03-04Merge branch 'regulator-5.1' into regulator-nextMark Brown
2019-03-04Merge branch 'regulator-5.0' into regulator-linusMark Brown
2019-03-04IB/mlx5: Set correct write permissions for implicit ODP MRMoni Shoua
The write access of an implicit MR is inherited to all of its children. Therefore we must set the correct write access to the parent MR. Pass full access_flags when creating umem to let it calculate write access correctly. Fixes: da6a496a34f2 ("IB/mlx5: Ranges in implicit ODP MR inherit its write access") Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-04drm: add __user attribute to ptr_to_compat()Ben Dooks
The ptr_to_compat() call takes a "void __user *", so cast the compat drm calls that use it to avoid the following warnings from sparse: drivers/gpu/drm/drm_ioc32.c:188:39: warning: incorrect type in argument 1 (different address spaces) drivers/gpu/drm/drm_ioc32.c:188:39: expected void [noderef] <asn:1>*uptr drivers/gpu/drm/drm_ioc32.c:188:39: got void *[addressable] [assigned] handle drivers/gpu/drm/drm_ioc32.c:529:41: warning: incorrect type in argument 1 (different address spaces) drivers/gpu/drm/drm_ioc32.c:529:41: expected void [noderef] <asn:1>*uptr drivers/gpu/drm/drm_ioc32.c:529:41: got void *[addressable] [assigned] handle Cc: stable@vger.kernel.org Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190301120046.26961-1-ben.dooks@codethink.co.uk
2019-03-04bnxt_re: Clean cq for kernel consumers onlyDevesh Sharma
Kernel space provider driver should clean the CQs belonging to kernel space consumers only. The current implementation is doing reverse of it. Fixing the same by avoiding the call to __clean_cq on a kernel qp during destroy. Fixes: c50866e2853a ("bnxt_re: fix the regression due to changes in alloc_pbl") Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-04xen/ACPI: Switch to bitmap_zalloc()Andy Shevchenko
Switch to bitmap_zalloc() to show clearly what we are allocating. Besides that it returns pointer of bitmap type instead of opaque void *. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-03-04PCI: altera: Enable driver on ARM64Ley Foon Tan
Enable PCIE_ALTERA on ARM64 platform. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-03-04PCI: altera: Add Stratix 10 PCIe supportLey Foon Tan
Add PCIe Root Port support for Stratix 10 device. Main differences compared to the PCIe Root Port IP on Cyclone V and Arria 10 devices: - HIP interface to access Root Port configuration register - TLP programming flow: - One REG0 register - Don't need to check alignment Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-03-04pwm: atmel: Remove useless symbolic definitionsThierry Reding
The values that these symbols define are only assigned to the per-SoC structure where the context is clear, so there's no need for the extra symbolic name. Acked-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-03-04pwm: bcm-kona: Update macros to remove braces around numbersSheetal Tigadoli
Parentheses are not needed around integer literals in macros. Remove them. Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-03-04pwm: imx27: Only enable the clocks once in .get_state()Uwe Kleine-König
Currently the function pwm_imx27_get_state() of enables the clocks once unconditionally at the start, a second time if the PWM is enabled and disables unconditionally at the end. Simplify that to enable once at the start and disable conditionally at the end. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-03-04media: dvb/earth-pt1: fix wrong initialization for demod blocksAkihiro Tsukada
earth-pt1 driver was decomposed/restructured by the commit b732539efdba ("media: dvb: earth-pt1: decompose pt1 driver into sub drivers"), but it introduced a problem regarding concurrent streaming: Opening a new terrestial stream stops the reception of an existing, already-opened satellite stream. The demod IC in earth-pt1 boards contains 2 pairs of terr. and sat. blocks, supporting 4 concurrent demodulations, and the above problem was because the config of a terr. block contained whole reset/init of the pair blocks, thus each open() of a terrestrial frontend wrongly cleared the config of its peer satellite block of the demod. This whole/pair reset should be executed earlier and not on each open(). Fixes: b732539efdba ("media: dvb: earth-pt1: decompose pt1 driver into sub drivers") Signed-off-by: Akihiro Tsukada <tskd08@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-04pwm: rcar: Improve calculation of dividerYoshihiro Shimoda
The rcar_pwm_get_clock_division() has a loop to calculate the divider, but the value of div should be calculatable without a loop. So, this patch improves it. This algorithm is suggested by Uwe Kleine-König and Laurent Pinchart. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-03-04pwm: rcar: Remove legacy APIsYoshihiro Shimoda
This patch removes legacy APIs. Since rcar_pwm_{en,dis}able() functions are reused on "atomic" API, this patch changes the arguments of these functions. No change in behavior. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-03-04pwm: rcar: Use "atomic" API on rcar_pwm_resume()Yoshihiro Shimoda
To remove legacy API related functions in the future, this patch uses "atomic" related function instead. No change in behavior. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-03-04pwm: rcar: Add support "atomic" APIYoshihiro Shimoda
This patch adds support for "atomic" API. This behavior differs with legacy APIs a little. Legacy APIs: The PWMCNT register will be updated in rcar_pwm_config() even if the PWM state is disabled. Atomic API: The PWMCNT register will be updated in rcar_pwm_apply() only if the PWM state is enabled. Otherwize, if a PWM runs with 30% duty cycles and the pwm_apply_state() is called with state->enabled = 0, ->duty_cycle = 60 and ->period = 100, this is possible to output a 60% duty cycle. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-03-04pwm: atmel: Add support for SAM9X60's PWM controllerClaudiu Beznea
Add support for SAM9X60's PWM controller. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-03-04pwm: atmel: Rename objects of type atmel_pwm_dataClaudiu Beznea
Rename objects of type atmel_pwm_data to contain chip name instead of version number. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-03-04pwm: atmel: Add support for controllers with 32 bit countersClaudiu Beznea
SAM9X60's PWM controller uses 32 bits counters thus it could generate signals with higher period and duty cycles than the old ones. Prepare the current driver to be able to work with old controllers (that uses 16 bits counters) and with the new SAM9X60's controller, by providing counters information based on compatible string. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-03-04pwm: atmel: Add struct atmel_pwm_dataClaudiu Beznea
Add struct atmel_pwm_data to embed different per controller information. It prepares adding support for another similar controller that needs additional information. At this stage, embed a member of type struct atmel_pwm_registers in it. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-03-04pwm: Add MediaTek MT8183 display PWM driver supportJitao Shi
Use the mtk_pwm_data struction to define different registers and add MT8183 specific register operations, such as MT8183 doesn't have commit register, needs to disable double buffer before writing register, and needs to select commit mode and use PWM_PERIOD/PWM_HIGH_WIDTH. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-03-04pwm: hibvt: Add hi3559v100 supportMathieu Othacehe
Add support for the hi3559v100-shub-pwm and hisilicon,hi3559v100-pwm platforms. They require a special quirk: the PWM has to be enabled twice to force a duty_cycle refresh. Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-03-04pwm: hibvt: Use individual struct per of-dataMathieu Othacehe
Split pwm_soc array in one struct per SoC and point to the corresponding one in of-data. Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-03-04Merge branch 'pm-opp'Rafael J. Wysocki
* pm-opp: cpufreq: OMAP: Register an Energy Model cpufreq: imx6q: Register an Energy Model opp: no need to check return value of debugfs_create functions cpufreq: mediatek: Register an Energy Model cpufreq: scmi: Register an Energy Model cpufreq: arm_big_little: Register an Energy Model cpufreq: scpi: Register an Energy Model cpufreq: dt: Register an Energy Model
2019-03-04Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: (48 commits) cpufreq: kryo: Release OPP tables on module removal cpufreq: ap806: add missing of_node_put after of_device_is_available cpufreq: acpi-cpufreq: Report if CPU doesn't support boost technologies cpufreq: Pass updated policy to driver ->setpolicy() callback cpufreq: Fix two debug messages in cpufreq_set_policy() cpufreq: Reorder and simplify cpufreq_update_policy() cpufreq: Add kerneldoc comments for two core functions cpufreq: intel_pstate: Rework iowait boosting to be less aggressive cpufreq: intel_pstate: Eliminate intel_pstate_get_base_pstate() cpufreq: intel_pstate: Avoid redundant initialization of local vars cpufreq / cppc: Work around for Hisilicon CPPC cpufreq ACPI / CPPC: Add a helper to get desired performance cpufreq: davinci: move configuration to include/linux/platform_data cpufreq: speedstep: convert BUG() to BUG_ON() cpufreq: powernv: fix missing check of return value in init_powernv_pstates() cpufreq: longhaul: remove unneeded semicolon cpufreq: pcc-cpufreq: remove unneeded semicolon cpufreq: Replace double NOT (!!) with single NOT (!) cpufreq: intel_pstate: Add reasons for failure and debug messages cpufreq: dt: Implement online/offline() callbacks ...
2019-03-04Merge branches 'pm-cpuidle' and 'powercap'Rafael J. Wysocki
* pm-cpuidle: ACPI / processor: Set P_LVL{2,3} idle state descriptions intel_idle: add support for Jacobsville cpuidle: dt: bail out if the idle-state DT node is not compatible cpuidle: use BIT() for idle state flags and remove CPUIDLE_DRIVER_FLAGS_MASK Documentation: driver-api: PM: Add cpuidle document cpuidle: New timer events oriented governor for tickless systems * powercap: powercap/intel_rapl: add Ice Lake mobile powercap: intel_rapl: add support for Jacobsville
2019-03-04Merge branches 'pm-core', 'pm-sleep', 'pm-qos', 'pm-domains' and 'pm-em'Rafael J. Wysocki
* pm-core: PM / core: Add support to skip power management in device/driver model PM / suspend: Print debug messages for device using direct-complete PM-runtime: update time accounting only when enabled PM-runtime: Switch accounting over to ktime_get_mono_fast_ns() PM-runtime: Optimize pm_runtime_autosuspend_expiration() PM-runtime: Replace jiffies-based accounting with ktime-based accounting PM-runtime: update accounting_timestamp on enable PM: clock_ops: fix missing clk_prepare() return value check drm/i915: Move on the new pm runtime interface PM-runtime: Add new interface to get accounted time * pm-sleep: PM / wakeup: fix kerneldoc comment for pm_wakeup_dev_event() * pm-qos: PM: QoS: no need to check return value of debugfs_create functions * pm-domains: PM / Domains: Mark "name" const in dev_pm_domain_attach_by_name() PM / Domains: Mark "name" const in genpd_dev_pm_attach_by_name() PM: domains: no need to check return value of debugfs_create functions * pm-em: PM / EM: Expose the Energy Model in debugfs
2019-03-04Merge branches 'acpi-video' and 'acpi-x86'Rafael J. Wysocki
* acpi-video: ACPI / video: Extend chassis-type detection with a "Lunch Box" check ACPI / video: Refactor and fix dmi_is_desktop() * acpi-x86: ACPI / x86: Make PWM2 device always present at Lenovo Yoga Book
2019-03-04Merge branch 'acpi-apei'Rafael J. Wysocki
* acpi-apei: (29 commits) efi: cper: Fix possible out-of-bounds access ACPI: APEI: Fix possible out-of-bounds access to BERT region MAINTAINERS: Add James Morse to the list of APEI reviewers ACPI / APEI: Add support for the SDEI GHES Notification type firmware: arm_sdei: Add ACPI GHES registration helper ACPI / APEI: Use separate fixmap pages for arm64 NMI-like notifications ACPI / APEI: Only use queued estatus entry during in_nmi_queue_one_entry() ACPI / APEI: Split ghes_read_estatus() to allow a peek at the CPER length ACPI / APEI: Make GHES estatus header validation more user friendly ACPI / APEI: Pass ghes and estatus separately to avoid a later copy ACPI / APEI: Let the notification helper specify the fixmap slot ACPI / APEI: Move locking to the notification helper arm64: KVM/mm: Move SEA handling behind a single 'claim' interface KVM: arm/arm64: Add kvm_ras.h to collect kvm specific RAS plumbing ACPI / APEI: Switch NOTIFY_SEA to use the estatus queue ACPI / APEI: Move NOTIFY_SEA between the estatus-queue and NOTIFY_NMI ACPI / APEI: Don't allow ghes_ack_error() to mask earlier errors ACPI / APEI: Generalise the estatus queue's notify code ACPI / APEI: Don't update struct ghes' flags in read/clear estatus ACPI / APEI: Remove spurious GHES_TO_CLEAR check ...
2019-03-04Merge branches 'acpi-tables', 'acpi-debug', 'acpi-ec' and 'acpi-dptf'Rafael J. Wysocki
* acpi-tables: ACPI/PPTT: Add acpi_pptt_warn_missing() to consolidate logs ACPI / tables: table override from built-in initrd * acpi-debug: ACPI: debug: Clean up acpi_aml_init() ACPI: no need to check return value of debugfs_create functions * acpi-ec: Revert "ACPI / EC: Remove old CLEAR_ON_RESUME quirk" ACPI: EC: Simplify boot EC checks in acpi_ec_add() ACPI: EC: Eliminate acpi_config_boot_ec() ACPI: EC: Make acpi_ec_dsdt_probe() more straightforward ACPI: EC: Make acpi_ec_ecdt_probe() more straightforward ACPI: EC: Declare boot_ec as static ACPI: EC: Clean up probing for early EC * acpi-dptf: ACPI / DPTF: remove header search path to the parent directory
2019-03-04Merge branch 'acpica'Rafael J. Wysocki
* acpica: ACPICA: Update version to 20190215 ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formatting ACPICA: ACPI 6.3: add GTDT Revision 3 support ACPICA: ACPI 6.3: HMAT updates ACPICA: ACPI 6.3: PPTT add additional fields in Processor Structure Flags ACPICA: ACPI 6.3: add Error Disconnect Recover Notification value ACPICA: ACPI 6.3: MADT: add support for statistical profiling in GICC ACPICA: ACPI 6.3: add PCC operation region support for AML interpreter ACPICA: ACPI 6.3: SRAT: add Generic Affinity Structure subtable ACPICA: ACPI 6.3: Add Trigger order to PCC Identifier structure in PDTT ACPICA: ACPI 6.3: Adding predefined methods _NBS, _NCH, _NIC, _NIH, and _NIG ACPICA: Update/clarify messages for control method failures ACPICA: Debugger: Fix possible fault with the "test objects" command ACPICA: Interpreter: Emit warning for creation of a zero-length op region ACPICA: Remove legacy module-level code support ACPICA: Get rid of acpi_sleep_dispatch() ACPICA: Update version to 20190108 ACPICA: All acpica: Update copyrights to 2019 ACPICA: acpiexec: Add option to dump extra info for memory leaks ACPICA: Convert more ACPI errors to firmware errors
generated by cgit (git 2.34.1) at 2025-09-24 10:49:08 +0000