| Age | Commit message (Collapse) | Author |
|---|
|
The getindex gets increased by one every time. We can calculate the
correct getindex in the driver and avoid the additional reads of rxfs.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20221206115728.1056014-6-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The getindex simply increases by one for every iteration. There is no
need to get the current getidx every time from a register. Instead we
can just count and wrap if necessary.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20221206115728.1056014-5-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Only read register PSR if there is an error indicated in irqstatus.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20221206115728.1056014-4-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
For peripheral devices the m_can_rx_handler is called directly after
setting cdev->irqstatus. This means we don't have to read the irqstatus
again in m_can_rx_handler. Avoid this by adding a parameter that is
false for direct calls.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20221206115728.1056014-3-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The TXFQS register is read first to check if the fifo is full and then
immediately again to get the putidx. This is unnecessary and adds
significant overhead if read requests are done over a slow bus, for
example SPI with tcan4x5x.
Add a variable to store the value of the register. Split the
m_can_tx_fifo_full function into two to avoid the hidden m_can_read call
if not needed.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20221206115728.1056014-2-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
When we try to access the mcan message ram addresses during the probe,
hclk is gated by any other drivers or disabled, because of that probe
gets failed.
Move the mram init functionality to mcan chip config called by
m_can_start from mcan open function, by that time clocks are
enabled.
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Vivek Yadav <vivek.2311@samsung.com>
Link: https://lore.kernel.org/all/20221207100632.96200-2-vivek.2311@samsung.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The iface field of struct gs_can is only used to retrieve the
usb_device which is already available in gs_can::udev.
Replace each occurrence of interface_to_usbdev(dev->iface) with
dev->udev. This done, remove gs_can::iface.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20221208081142.16936-3-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Field intf of struct ucan_priv is set but never used. Remove it.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20221208081142.16936-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL terminated strings.
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Link: https://lore.kernel.org/all/202212070909095189693@zte.com.cn
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Now that the product information are available under devlink, no more
need to print them in the kernel log. Remove es58x_get_product_info().
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/all/20221130174658.29282-7-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
ES58x devices report below product information through a custom usb
string:
* the firmware version
* the bootloader version
* the hardware revision
Parse this string, store the results in struct es58x_dev, export:
* the firmware version through devlink's "fw" name
* the bootloader version through devlink's "fw.bootloader" name
* the hardware revisionthrough devlink's "board.rev" name
Those devlink entries are not critical to use the device, if parsing
fails, print an informative log message and continue to probe the
device.
In addition to that, use usb_device::serial to report the device
serial number.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/all/20221130174658.29282-6-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
usb_cache_string() can also be useful for the drivers so export it.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/all/20221130174658.29282-4-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add support for devlink port which extends the devlink support to the
network interface level. For now, the etas_es58x driver will only rely
on the default features that devlink port has to offer and not
implement additional feature ones.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20221130174658.29282-3-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add basic support for devlink at the device level. The callbacks of
struct devlink_ops will be implemented next.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20221130174658.29282-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/all/202211111443005202576@zte.com.cn
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
IMX93 do not contain a GPR to config the stop mode, it will set
the flexcan into stop mode automatically once the ARM core go
into low power mode (WFI instruct) and gate off the flexcan
related clock automatically. But to let these logic work as
expect, before ARM core go into low power mode, need to make
sure the flexcan related clock keep on.
To support stop mode and wakeup feature on imx93, this patch
add a new fsl_imx93_devtype_data to separate from imx8mp.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/all/1669116752-4260-1-git-send-email-haibo.chen@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Follow the best practices, reorder the includes.
While doing so, bump up copyright year of each modified files.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20221126160525.87036-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Cc: Ondrej Ille <ondrej.ille@gmail.com>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Link: https://lore.kernel.org/all/20221124141604.4265225f@endymion.delvare
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
There are cables that exist that can support speeds in excess of 10GbE.
The driver, however, restricts the EEPROM advertised nominal bitrate to
a specific range, which can prevent usage of cables that can support,
for example, up to 25GbE.
Rather than checking that an active or passive cable supports a specific
range, only check for a minimum supported speed.
Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SFP+ active and passive cables are copper cables with fixed SFP+ end
connectors. Due to a misinterpretation of this, SFP+ active cables could
end up not being recognized, causing the driver to fail to establish a
connection.
Introduce a new enum in SFP+ cable types, XGBE_SFP_CABLE_FIBER, that is
the default cable type, and handle active and passive cables when they are
specifically detected.
Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL terminated strings.
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL terminated strings.
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL terminated strings.
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In these two cases, dev_kfree_skb() is called consume the xmited SKB,
so replace it with dev_consume_skb_irq().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In scc_discard_buffers(), dev_kfree_skb() is called to discard the SKBs,
so replace it with dev_kfree_skb_irq().
In scc_net_tx(), dev_kfree_skb() is called to drop the SKB that exceed
queue length, so replace it with dev_kfree_skb_irq().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
In this case, the lock is used to protected 'bp', so we can move
dev_kfree_skb() after the spin_unlock_irqrestore().
Fixes: 4796417417a6 ("dnet: Dave DNET ethernet controller driver (updated)")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In this case, dev_kfree_skb() is called in xemaclite_tx_timeout() to
drop the SKB, when tx timeout, so replace it with dev_kfree_skb_irq().
Fixes: bb81b2ddfa19 ("net: add Xilinx emac lite device driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In this case, dev_kfree_skb() is called in bmac_tx_timeout() to drop
the SKB, when tx timeout, so replace it with dev_kfree_skb_irq().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In this case, dev_kfree_skb() is called in mace_tx_timeout() to drop
the SKB, when tx timeout, so replace it with dev_kfree_skb_irq().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are two memory leaks reported by kmemleak:
unreferenced object 0xffff888114b20200 (size 128):
comm "modprobe", pid 4846, jiffies 4295146524 (age 401.345s)
hex dump (first 32 bytes):
e0 62 57 09 81 88 ff ff e0 62 57 09 81 88 ff ff .bW......bW.....
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff815bcd82>] kmalloc_trace+0x22/0x60
[<ffffffff83d35c78>] __hw_addr_add_ex+0x198/0x6c0
[<ffffffff83d3989d>] dev_addr_init+0x13d/0x230
[<ffffffff83d1063d>] alloc_netdev_mqs+0x10d/0xe50
[<ffffffff82b4a06e>] alloc_hdlcdev+0x2e/0x80
[<ffffffffa016a741>] fst_add_one+0x601/0x10e0 [farsync]
...
unreferenced object 0xffff88810b85b000 (size 1024):
comm "modprobe", pid 4846, jiffies 4295146523 (age 401.346s)
hex dump (first 32 bytes):
00 00 b0 02 00 c9 ff ff 00 70 0a 00 00 c9 ff ff .........p......
00 00 00 f2 00 00 00 f3 0a 00 00 00 02 00 00 00 ................
backtrace:
[<ffffffff815bcd82>] kmalloc_trace+0x22/0x60
[<ffffffffa016a294>] fst_add_one+0x154/0x10e0 [farsync]
[<ffffffff82060e83>] local_pci_probe+0xd3/0x170
...
The root cause is traced to the netdev and fst_card_info are not freed
when removes one fst in fst_remove_one(), which may trigger oom if
repeated insmod and rmmod module.
Fix it by adding free_netdev() and kfree() in fst_remove_one(), just as
the operations on the error handling path in fst_add_one().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In this case, dev_kfree_skb() is called in free_tx_buffers() to drop
the SKBs in tx buffers, when the card is down, so replace it with
dev_kfree_skb_irq() here.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adds a boundary check to prevent negative basetime input from user
while configuring taprio.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: Lai Peter Jun Ann <jun.ann.lai@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Had a duplicate event typo, so just fixed the 1 character typo.
Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Signed-off-by: James Hurley <jahurley@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Link: https://lore.kernel.org/r/aadacdbbd3186c55e74ea9456fe011b77938eb6c.1670535330.git.jahurley@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Now, it possible to enable GSO_UDP_L4("tx-udp-segmentation") for VirtioNet.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Added support for USO4 and USO6.
For now, to "enable" USO, it's required to set both USO4 and USO6 simultaneously.
USO enables NETIF_F_GSO_UDP_L4.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When kfifo_alloc fails, the refcount of chdev->dev is left incremental.
We should use put_device(&chdev->dev) to decrease the ref count of
chdev->dev to avoid refcount leak.
Link: https://lkml.kernel.org/r/20221203085721.13146-1-caixinchen1@huawei.com
Fixes: e8de370188d0 ("rapidio: add mport char device driver")
Signed-off-by: Cai Xinchen <caixinchen1@huawei.com>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Jakob Koschel <jakobkoschel@gmail.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Wang Weiyang <wangweiyang2@huawei.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If kfifo_alloc() fails in mport_cdev_open(), goto err_fifo and just free
priv. But priv is still in the chdev->file_list, then list traversal
may cause UAF. This fixes the following smatch warning:
drivers/rapidio/devices/rio_mport_cdev.c:1930 mport_cdev_open() warn: '&priv->list' not removed from list
Link: https://lkml.kernel.org/r/20221123095147.52408-1-wangweiyang2@huawei.com
Fixes: e8de370188d0 ("rapidio: add mport char device driver")
Signed-off-by: Wang Weiyang <wangweiyang2@huawei.com>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Jakob Koschel <jakobkoschel@gmail.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
and find_dup_cset_prop()
When kmalloc() fail to allocate memory in kasprintf(), fn_1 or fn_2 will
be NULL, and strcmp() will cause null pointer dereference.
Fixes: 2fe0e8769df9 ("of: overlay: check prevents multiple fragments touching same property")
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20221211023337.592266-1-ruanjinjie@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
pcf85063_clkout_control reads the wrong register but then update the
correct one.
Reported-by: Janne Terho <janne.terho@ouman.fi>
Fixes: 8c229ab6048b ("rtc: pcf85063: Add pcf85063 clkout control to common clock framework")
Link: https://lore.kernel.org/r/20221211223553.59955-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
rx6110_spi_of_match is not used when !OF, leading to a warning:
>> drivers/rtc/rtc-rx6110.c:384:34: warning: 'rx6110_spi_of_match' defined but not used [-Wunused-const-variable=]
384 | static const struct of_device_id rx6110_spi_of_match[] = {
| ^~~~~~~~~~~~~~~~~~~
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20221211215756.54002-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Because not all I3C drivers have the hot-join feature ready, and
especially not all I3C devices support hot-join feature, exporting
SETDASA method could be useful. With this function, the I3C controller
could perform a DAA to I3C devices when users decide to turn these I3C
devices off and on again during run-time.
Tested: This change has been tested with turnning off an I3C device and
turning on it again during run-time. The device driver calls SETDASA
method to perform DAA to the device. And communication between I3C
controller and device is set up again correctly.
Signed-off-by: Jack Chen <zenghuchen@google.com>
Link: https://lore.kernel.org/r/20221207205059.3848851-1-zenghuchen@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Reduce usage of 'struct rk808' (driver data of the parent MFD), so
that only the chip variant field is still being accessed directly.
This allows restructuring the MFD driver to support SPI based
PMICs.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20221020204251.108565-4-sebastian.reichel@collabora.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fix from Joerg Roedel:
- Fix device mask to catch all affected devices in the recently added
quirk for QAT devices in the Intel VT-d driver.
* tag 'iommu-fix-v6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix buggy QAT device mask
|
|
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed.
msc313_rtc_probe() was passing clk_disable_unprepare() directly, which
did not have matching prototypes for devm_add_action_or_reset()'s
callback argument. Refactor to use devm_clk_get_enabled() instead.
This was found as a result of Clang's new -Wcast-function-type-strict
flag, which is more sensitive than the simpler -Wcast-function-type,
which only checks for type width mismatches.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202211041527.HD8TLSE1-lkp@intel.com
Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Daniel Palmer <daniel@thingy.jp>
Cc: Romain Perier <romain.perier@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rtc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Daniel Palmer <daniel@thingy.jp>
Tested-by: Daniel Palmer <daniel@thingy.jp>
Link: https://lore.kernel.org/r/20221202184525.gonna.423-kees@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
There are 2 ways to create IPoIB PKEY child interfaces:
1) Writing a PKEY to /sys/class/net/<ib parent interface>/create_child.
2) Using netlink with iproute.
While with sysfs the child interface has the same number of tx and
rx queues as the parent, with netlink there will always be 1 tx
and 1 rx queue for the child interface. That's because the
get_num_tx/rx_queues() netlink ops are missing and the default value
of 1 is taken for the number of queues (in rtnl_create_link()).
This change adds the get_num_tx/rx_queues() ops which allows for
interfaces with multiple queues to be created over netlink. This
constant only represents the max number of tx and rx queues on that
net device.
Fixes: 9baa0b036410 ("IB/ipoib: Add rtnl_link_ops support")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://lore.kernel.org/r/f4a42c8aa43c02d5ae5559a60c3e5e0f18c82531.1670485816.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The netdev core will detect if any untracked puts are done on tracked
pointers and throw refcount warnings:
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 1 PID: 33 at lib/refcount.c:31 refcount_warn_saturate+0x1d7/0x1f0 lib/refcount.c:31
Modules linked in:
CPU: 1 PID: 33 Comm: kworker/u4:2 Not tainted 6.1.0-rc8-next-20221207-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Workqueue: ib-unreg-wq ib_unregister_work
RIP: 0010:refcount_warn_saturate+0x1d7/0x1f0 lib/refcount.c:31
Code: 05 5a 60 51 0a 01 e8 35 0a b5 05 0f 0b e9 d3 fe ff ff e8 6c 9b 75 fd 48 c7 c7 c0 6d a6 8a c6 05 37 60 51 0a 01 e8 16 0a b5 05 <0f> 0b e9 b4 fe
+ff ff 48 89 ef e8 5a b5 c3 fd e9 5c fe ff ff 0f 1f
RSP: 0018:ffffc90000aa7b30 EFLAGS: 00010082
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff8880172f9d40 RSI: ffffffff8166b1dc RDI: fffff52000154f58
RBP: ffff88807906c600 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000080000001 R11: 0000000000000000 R12: 1ffff92000154f6b
R13: 0000000000000000 R14: ffff88807906c600 R15: ffff888046894000
FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffe350a8ff8 CR3: 000000007a9e7000 CR4: 00000000003526e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__refcount_dec include/linux/refcount.h:344 [inline]
refcount_dec include/linux/refcount.h:359 [inline]
ref_tracker_free+0x539/0x6b0 lib/ref_tracker.c:118
netdev_tracker_free include/linux/netdevice.h:4039 [inline]
netdev_put include/linux/netdevice.h:4056 [inline]
dev_put include/linux/netdevice.h:4082 [inline]
free_netdevs+0x1f8/0x470 drivers/infiniband/core/device.c:2204
__ib_unregister_device+0xa0/0x1a0 drivers/infiniband/core/device.c:1478
ib_unregister_work+0x19/0x30 drivers/infiniband/core/device.c:1586
process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289
worker_thread+0x669/0x1090 kernel/workqueue.c:2436
kthread+0x2e8/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
So change the missed dev_put for pdata->netdev to also follow the tracker.
Fixes: 09f530f0c6d6 ("RDMA: Add netdevice_tracker to ib_device_set_netdev()")
Reported-by: syzbot+3fd8326d9a0812d19218@syzkaller.appspotmail.com
Reported-by: syzbot+a1ed8ffe3121380cd5dd@syzkaller.appspotmail.com
Reported-by: syzbot+8d0a099c8a6d1e4e601c@syzkaller.appspotmail.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-e99919867b8d+1e2-netdev_tracker2_jgg@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The pic32_rtc_enable(pdata, 0) and clk_disable_unprepare(pdata->clk)
should be called in the error handling of devm_rtc_allocate_device(),
so we should move devm_rtc_allocate_device earlier in pic32_rtc_probe()
to fix it.
Fixes: 6515e23b9fde ("rtc: pic32: convert to devm_rtc_allocate_device")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221123015953.1998521-1-cuigaosheng1@huawei.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The clk_disable_unprepare() should be called in the error handling
of clk_get_rate(), fix it.
Fixes: b5b2bdfc2893 ("rtc: st: Add new driver for ST's LPC RTC")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221123014805.1993052-1-cuigaosheng1@huawei.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
- Remove unnecessary <linux/of_irq.h> includes (Bjorn Helgaas)
* pci/kbuild:
PCI: Drop of_match_ptr() to avoid unused variables
PCI: Remove unnecessary <linux/of_irq.h> includes
PCI: xgene-msi: Include <linux/irqdomain.h> explicitly
PCI: mvebu: Include <linux/irqdomain.h> explicitly
PCI: microchip: Include <linux/irqdomain.h> explicitly
PCI: altera-msi: Include <linux/irqdomain.h> explicitly
# Conflicts:
# drivers/pci/controller/pci-mvebu.c
|
|
- Fix whitespace issues (Michal Simek)
* pci/ctrl/xilinx:
PCI: xilinx-nwl: Fix coding style violations
|
