| Age | Commit message (Collapse) | Author |
|---|
|
This driver supports page faults on PCI RID since commit <9f831c16c69e>
("iommu/vt-d: Remove the pasid present check in prq_event_thread") by
allowing the reporting of page faults with the pasid_present field cleared
to the upper layer for further handling. The fundamental assumption here
is that the detach or replace operations act as a fence for page faults.
This implies that all pending page faults associated with a specific RID
or PASID are flushed when a domain is detached or replaced from a device
RID or PASID.
However, the intel_iommu_drain_pasid_prq() helper does not correctly
handle faults for RID. This leads to faults potentially remaining pending
in the iommu hardware queue even after the domain is detached, thereby
violating the aforementioned assumption.
Fix this issue by extending intel_iommu_drain_pasid_prq() to cover faults
for RID.
Fixes: 9f831c16c69e ("iommu/vt-d: Remove the pasid present check in prq_event_thread")
Cc: stable@vger.kernel.org
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250121023150.815972-1-baolu.lu@linux.intel.com
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20250211005512.985563-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
There are some typos in comments/messages:
- modyfying -> modifying
- Unabled -> Unable
Fix them via codespell.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Link: https://lore.kernel.org/r/20250210112027.29791-1-algonell@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Fix spelling error IDENITY -> IDENTITY in
drivers/iommu/iommu.c.
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250128190522.70800-1-eahariha@linux.microsoft.com
[ joro: Add commit message ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
With recent kernel, AMDGPU failed to resume after suspend on certain laptop.
Sample log:
-----------
Nov 14 11:52:19 Thinkbook kernel: iommu ivhd0: AMD-Vi: Event logged [ILLEGAL_DEV_TABLE_ENTRY device=0000:06:00.0 pasid=0x00000 address=0x135300000 flags=0x0080]
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[0]: 7d90000000000003
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[1]: 0000100103fc0009
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[2]: 2000000117840013
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[3]: 0000000000000000
This is because in resume path, CNTRL[EPHEn] is not set. Fix this by
setting CNTRL[EPHEn] to 1 in resume path if EFR[EPHSUP] is set.
Note
May be better approach is to save the control register in suspend path
and restore it in resume path instead of trying to set indivisual
bits. We will have separate patch for that.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219499
Fixes: c4cb23111103 ("iommu/amd: Add support for enable/disable IOPF")
Tested-by: Hamish McIntyre-Bhatty <kernel-bugzilla@regd.hamishmb.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250127094411.5931-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes pull request, nothing too unusual, the hdmi tests
needs a bit of refactoring after lockdep shouted at them, otherwise
amdgpu and xe lead and a few misc otherwise.
amdgpu:
- Fix shutdown regression on old APUs
- Fix compute queue hang on gfx9 APUs
- Fix possible invalid access in PSP failure path
- Avoid possible buffer overflow in pptable override
amdkfd:
- Properly free gang bo in failure path
- GFX12 trap handler fix
i915:
- selftest fix: avoid using uninitialized context
xe:
- Remove bo->clients out of bos_lock area
- Carve out wopcm portion from the stolen memory
tests:
- fix lockdep with hdmi infrastructure tests
host1x:
- fix uninitialised mutex usage
panthor:
- fix uninit variable
hibmc:
- fix missing Kconfig select"
* tag 'drm-fixes-2025-02-14' of https://gitlab.freedesktop.org/drm/kernel:
drm: Fix DSC BPP increment decoding
drm/amdgpu: avoid buffer overflow attach in smu_sys_set_pp_table()
drm/amdkfd: Ensure consistent barrier state saved in gfx12 trap handler
drm/amdgpu: bail out when failed to load fw in psp_init_cap_microcode()
amdkfd: properly free gang_ctx_bo when failed to init user queue
drm/amdgpu: bump version for RV/PCO compute fix
drm/amdgpu/gfx9: manually control gfxoff for CS on RV
drm/amdgpu/pm: fix UVD handing in amdgpu_dpm_set_powergating_by_smu()
drm/xe: Carve out wopcm portion from the stolen memory
drm/i915/selftests: avoid using uninitialized context
drm/xe/client: bo->client does not need bos_lock
drm/hisilicon/hibmc: select CONFIG_DRM_DISPLAY_DP_HELPER
drm/panthor: avoid garbage value in panthor_ioctl_dev_query()
gpu: host1x: Fix a use of uninitialized mutex
drm/tests: hdmi: Fix recursive locking
drm/tests: hdmi: Reorder DRM entities variables assignment
drm/tests: hdmi: Remove redundant assignments
drm/tests: hdmi: Fix WW_MUTEX_SLOWPATH failures
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Remove bo->clients out of bos_lock area (Tejas)
- Carve out wopcm portion from the stolen memory (Nirmoy)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z64rCicgpBe_t5GY@intel.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Selftest fix: avoid using uninitialized context
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z64qg13R_72iN3_X@intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.14-2025-02-13:
amdgpu:
- Fix shutdown regression on old APUs
- Fix compute queue hang on gfx9 APUs
- Fix possible invalid access in PSP failure path
- Avoid possible buffer overflow in pptable override
amdkfd:
- Properly free gang bo in failure path
- GFX12 trap handler fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213153843.242640-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Some locking fixes for the HDMI infrastructure tests, an unitialized
mutex fix for host1x, an unitialized variable fix for panthor, and a
config selection fix for hibmc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213-brilliant-terrier-from-hell-d06dd5@houat
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.15:
UAPI Changes:
fourcc:
- Add modifiers for MediaTek tiled formats
Cross-subsystem Changes:
bus:
- mhi: Enable image transfer via BHIe in PBL
dma-buf:
- Add fast-path for single-fence merging
Core Changes:
atomic helper:
- Allow full modeset on connector changes
- Clarify semantics of allow_modeset
- Clarify semantics of drm_atomic_helper_check()
buddy allocator:
- Fix multi-root cleanup
ci:
- Update IGT
display:
- dp: Support Extendeds Wake Timeout
- dp_mst: Fix RAD-to-string conversion
panic:
- Encode QR code according to Fido 2.2
probe helper:
- Cleanups
scheduler:
- Cleanups
ttm:
- Refactor pool-allocation code
- Cleanups
Driver Changes:
amdxdma:
- Fix error handling
- Cleanups
ast:
- Refactor detection of transmitter chips
- Refactor support of VBIOS display-mode handling
- astdp: Fix connection status; Filter unsupported display modes
bridge:
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- sn65dsi86: Fix device IDs
- Cleanups
i915:
- Enable Extendeds Wake Timeout
imagination:
- Check job dependencies with DRM-sched helper
ivpu:
- Improve command-queue handling
- Use workqueue for IRQ handling
- Add suport for HW fault injection
- Locking fixes
- Cleanups
mgag200:
- Add support for G200eH5 chips
msm:
- dpu: Add concurrent writeback support for DPU 10.x+
nouveau:
- Move drm_slave_encoder interface into driver
- nvkm: Refactor GSP RPC
omapdrm:
- Cleanups
panel:
- Convert several panels to multi-style functions to improve error
handling
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry 116KHD024006,
Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Cleanups
qaic:
- Add support for AIC200
- Cleanups
renesas:
- Fix limits in DT bindings
rockchip:
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- Cleanups
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
xlnx:
- Set correct DMA segment size
- Fix error handling
- Fix docs
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212090625.GA24865@linux.fritz.box
|
|
amdgpu can handle async flips on overlay planes, so allow it for atomic
async checks.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250127-tonyk-async_flip-v12-2-0f7f8a8610d3@igalia.com
[DB: fixed checkpatch warning by adding braces]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Currently, DRM atomic uAPI allows only primary planes to be flipped
asynchronously. However, each driver might be able to perform async
flips in other different plane types. To enable drivers to set their own
restrictions on which type of plane they can or cannot flip, use the
existing atomic_async_check() from struct drm_plane_helper_funcs to
enhance this flexibility, thus allowing different plane types to be able
to do async flips as well.
Create a new parameter for the atomic_async_check(), `bool flip`. This
parameter is used to distinguish when this function is being called from
a plane update from a full page flip.
In order to prevent regressions and such, we keep the current policy: we
skip the driver check for the primary plane, because it is always
allowed to do async flips on it.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Christopher Snowhill <chris@kode54.net>
Tested-by: Christopher Snowhill <chris@kode54.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20250127-tonyk-async_flip-v12-1-0f7f8a8610d3@igalia.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of driver specific fixes, none standing out in
particular"
* tag 'spi-fix-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: sn-f-ospi: Fix division by zero
spi: pxa2xx: Fix regression when toggling chip select on LPSS devices
spi: atmel-quadspi: Fix warning in doc-comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"The main change here is a revert for a cleanup that was done in the
core, attempting to resolve some confusion about how we handle systems
where we've somehow managed to end up with both platform data and
device tree data for the same device. Unfortunately it turns out there
are actually a few systems that deliberately do this and were broken
by the change so we've just reverted it.
There's also a new Qualcomm device ID"
* tag 'regulator-fix-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: let dt properties override driver init_data
regulator: qcom_smd: Add l2, l5 sub-node to mp5496 regulator
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"A simple fix for memory leaks when deallocating regmap-irq
controllers"
* tag 'regmap-fix-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-irq: Add missing kfree()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bluetooth.
Kalle Valo steps down after serving as the WiFi driver maintainer for
over a decade.
Current release - fix to a fix:
- vsock: orphan socket after transport release, avoid null-deref
- Bluetooth: L2CAP: fix corrupted list in hci_chan_del
Current release - regressions:
- eth:
- stmmac: correct Rx buffer layout when SPH is enabled
- iavf: fix a locking bug in an error path
- rxrpc: fix alteration of headers whilst zerocopy pending
- s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
- Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
Current release - new code bugs:
- rxrpc: fix ipv6 path MTU discovery, only ipv4 worked
- pse-pd: fix deadlock in current limit functions
Previous releases - regressions:
- rtnetlink: fix netns refleak with rtnl_setlink()
- wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364
firmware
Previous releases - always broken:
- add missing RCU protection of struct net throughout the stack
- can: rockchip: bail out if skb cannot be allocated
- eth: ti: am65-cpsw: base XDP support fixes
Misc:
- ethtool: tsconfig: update the format of hwtstamp flags, changes the
uAPI but this uAPI was not in any release yet"
* tag 'net-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
net: pse-pd: Fix deadlock in current limit functions
rxrpc: Fix ipv6 path MTU discovery
Reapply "net: skb: introduce and use a single page frag cache"
s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
mlxsw: Add return value check for mlxsw_sp_port_get_stats_raw()
ipv6: mcast: add RCU protection to mld_newpack()
team: better TEAM_OPTION_TYPE_STRING validation
Bluetooth: L2CAP: Fix corrupted list in hci_chan_del
Bluetooth: btintel_pcie: Fix a potential race condition
Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd
net: ethernet: ti: am65_cpsw: fix tx_cleanup for XDP case
net: ethernet: ti: am65-cpsw: fix RX & TX statistics for XDP_TX case
net: ethernet: ti: am65-cpsw: fix memleak in certain XDP cases
vsock/test: Add test for SO_LINGER null ptr deref
vsock: Orphan socket after transport release
MAINTAINERS: Add sctp headers to the general netdev entry
Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
iavf: Fix a locking bug in an error path
rxrpc: Fix alteration of headers whilst zerocopy pending
net: phylink: make configuring clock-stop dependent on MAC support
...
|
|
Fix a deadlock in pse_pi_get_current_limit and pse_pi_set_current_limit
caused by consecutive mutex_lock calls. One in the function itself and
another in pse_pi_get_voltage.
Resolve the issue by using the unlocked version of pse_pi_get_voltage
instead.
Fixes: e0a5e2bba38a ("net: pse-pd: Use power limit at driver side instead of current limit")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250212151751.1515008-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The gpiochip_get_ngpios() uses chip_*() macros to print messages.
However these macros rely on gpiodev to be initialised and set,
which is not the case when called via bgpio_init(). In such a case
the printing messages will crash on NULL pointer dereference.
Replace chip_*() macros by the respective dev_*() ones to avoid
such crash.
Fixes: 55b2395e4e92 ("gpio: mmio: handle "ngpios" properly in bgpio_init()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250213155646.2882324-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btintel_pcie: Fix a potential race condition
- L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd
- L2CAP: Fix corrupted list in hci_chan_del
* tag 'for-net-2025-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Fix corrupted list in hci_chan_del
Bluetooth: btintel_pcie: Fix a potential race condition
Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd
====================
Link: https://patch.msgid.link/20250213162446.617632-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
queue_limits_cancel_update() must only be called if
queue_limits_start_update() is called first. Remove the
queue_limits_cancel_update() calls from the raid*_set_limits() functions
because there is no corresponding queue_limits_start_update() call.
Cc: Christoph Hellwig <hch@lst.de>
Fixes: c6e56cf6b2e7 ("block: move integrity information into queue_limits")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-raid/20250212171108.3483150-1-bvanassche@acm.org/
Signed-off-by: Yu Kuai <yukuai@kernel.org>
|
|
Use DRM's device wedged event to notify userspace that a reset had
happened. For now, only use `none` method meant for telemetry
capture.
In the future we might want to report a recovery method if the reset didn't
succeed.
Acked-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204070528.1919158-6-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Now that we have device wedged event provided by DRM core, make use
of it and support both driver rebind and bus-reset based recovery.
With this in place, userspace will be notified of wedged device on
gt reset failure.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204070528.1919158-5-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This was previously attempted as xe specific reset uevent but dropped
in commit 77a0d4d1cea2 ("drm/xe/uapi: Remove reset uevent for now")
as part of refactoring.
Now that we have device wedged event provided by DRM core, make use
of it and support both driver rebind and bus-reset based recovery.
With this in place userspace will be notified of wedged device, on
the basis of which, userspace may take respective action to recover
the device.
$ udevadm monitor --property --kernel
monitor will print the received events for:
KERNEL - the kernel uevent
KERNEL[265.802982] change /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:01.0/0000:03:00.0/drm/card0 (drm)
ACTION=change
DEVPATH=/devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:01.0/0000:03:00.0/drm/card0
SUBSYSTEM=drm
WEDGED=rebind,bus-reset
DEVNAME=/dev/dri/card0
DEVTYPE=drm_minor
SEQNUM=5208
MAJOR=226
MINOR=0
v2: Change authorship to Himal (Aravind)
Add uevent for all device wedged cases (Aravind)
v3: Generic implementation in DRM subsystem (Lucas)
v4: Change authorship to Raag (Aravind)
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204070528.1919158-4-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Introduce device wedged event, which notifies userspace of 'wedged'
(hanged/unusable) state of the DRM device through a uevent. This is
useful especially in cases where the device is no longer operating as
expected and has become unrecoverable from driver context. Purpose of
this implementation is to provide drivers a generic way to recover the
device with the help of userspace intervention without taking any drastic
measures (like resetting or re-enumerating the full bus, on which the
underlying physical device is sitting) in the driver.
A 'wedged' device is basically a device that is declared dead by the
driver after exhausting all possible attempts to recover it from driver
context. The uevent is the notification that is sent to userspace along
with a hint about what could possibly be attempted to recover the device
from userspace and bring it back to usable state. Different drivers may
have different ideas of a 'wedged' device depending on hardware
implementation of the underlying physical device, and hence the vendor
agnostic nature of the event. It is up to the drivers to decide when they
see the need for device recovery and how they want to recover from the
available methods.
Driver prerequisites
--------------------
The driver, before opting for recovery, needs to make sure that the
'wedged' device doesn't harm the system as a whole by taking care of the
prerequisites. Necessary actions must include disabling DMA to system
memory as well as any communication channels with other devices. Further,
the driver must ensure that all dma_fences are signalled and any device
state that the core kernel might depend on is cleaned up. All existing
mmaps should be invalidated and page faults should be redirected to a
dummy page. Once the event is sent, the device must be kept in 'wedged'
state until the recovery is performed. New accesses to the device
(IOCTLs) should be rejected, preferably with an error code that resembles
the type of failure the device has encountered. This will signify the
reason for wedging, which can be reported to the application if needed.
Recovery
--------
Current implementation defines three recovery methods, out of which,
drivers can use any one, multiple or none. Method(s) of choice will be
sent in the uevent environment as ``WEDGED=<method1>[,..,<methodN>]`` in
order of less to more side-effects. If driver is unsure about recovery
or method is unknown (like soft/hard system reboot, firmware flashing,
physical device replacement or any other procedure which can't be
attempted on the fly), ``WEDGED=unknown`` will be sent instead.
Userspace consumers can parse this event and attempt recovery as per the
following expectations.
=============== ========================================
Recovery method Consumer expectations
=============== ========================================
none optional telemetry collection
rebind unbind + bind driver
bus-reset unbind + bus reset/re-enumeration + bind
unknown consumer policy
=============== ========================================
The only exception to this is ``WEDGED=none``, which signifies that the
device was temporarily 'wedged' at some point but was recovered from driver
context using device specific methods like reset. No explicit recovery is
expected from the consumer in this case, but it can still take additional
steps like gathering telemetry information (devcoredump, syslog). This is
useful because the first hang is usually the most critical one which can
result in consequential hangs or complete wedging.
Consumer prerequisites
----------------------
It is the responsibility of the consumer to make sure that the device or
its resources are not in use by any process before attempting recovery.
With IOCTLs erroring out, all device memory should be unmapped and file
descriptors should be closed to prevent leaks or undefined behaviour. The
idea here is to clear the device of all user context beforehand and set
the stage for a clean recovery.
Example
-------
Udev rule::
SUBSYSTEM=="drm", ENV{WEDGED}=="rebind", DEVPATH=="*/drm/card[0-9]",
RUN+="/path/to/rebind.sh $env{DEVPATH}"
Recovery script::
#!/bin/sh
DEVPATH=$(readlink -f /sys/$1/device)
DEVICE=$(basename $DEVPATH)
DRIVER=$(readlink -f $DEVPATH/driver)
echo -n $DEVICE > $DRIVER/unbind
echo -n $DEVICE > $DRIVER/bind
Customization
-------------
Although basic recovery is possible with a simple script, consumers can
define custom policies around recovery. For example, if the driver supports
multiple recovery methods, consumers can opt for the suitable one depending
on scenarios like repeat offences or vendor specific failures. Consumers
can also choose to have the device available for debugging or telemetry
collection and base their recovery decision on the findings. This is useful
especially when the driver is unsure about recovery or method is unknown.
v4: s/drm_dev_wedged/drm_dev_wedged_event
Use drm_info() (Jani)
Kernel doc adjustment (Aravind)
v5: Send recovery method with uevent (Lina)
v6: Access wedge_recovery_opts[] using helper function (Jani)
Use snprintf() (Jani)
v7: Convert recovery helpers into regular functions (Andy, Jani)
Aesthetic adjustments (Andy)
Handle invalid recovery method
v8: Allow sending multiple methods with uevent (Lucas, Michal)
static_assert() globally (Andy)
v9: Provide 'none' method for device reset (Christian)
Provide recovery opts using switch cases
v11: Log device reset (André)
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204070528.1919158-2-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In jadard_prepare() a reset pulse is generated with the following
statements (delays ommited for clarity):
gpiod_set_value(jadard->reset, 1); --> Deassert reset
gpiod_set_value(jadard->reset, 0); --> Assert reset for 10ms
gpiod_set_value(jadard->reset, 1); --> Deassert reset
However, specifying second argument of "0" to gpiod_set_value() means to
deassert the GPIO, and "1" means to assert it. If the reset signal is
defined as GPIO_ACTIVE_LOW in the DTS, the above statements will
incorrectly generate the reset pulse (inverted) and leave it asserted
(LOW) at the end of jadard_prepare().
Fix reset behavior by inverting gpiod_set_value() second argument
in jadard_prepare(). Also modify second argument to devm_gpiod_get()
in jadard_dsi_probe() to assert the reset when probing.
Do not modify it in jadard_unprepare() as it is already properly
asserted with "1", which seems to be the intended behavior.
Fixes: 6b818c533dd8 ("drm: panel: Add Jadard JD9365DA-H3 DSI panel")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240927135306.857617-1-hugo@hugovil.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927135306.857617-1-hugo@hugovil.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- thinkpad_acpi:
- Fix registration of tpacpi platform driver
- Support fan speed in ticks per revolution (Thinkpad X120e)
- Support V9 DYTC profiles (new Thinkpad AMD platforms)
- int3472: Handle GPIO "enable" vs "reset" variation (ov7251)
* tag 'platform-drivers-x86-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Fix registration of tpacpi platform driver
platform/x86: int3472: Call "reset" GPIO "enable" for INT347E
platform/x86: int3472: Use correct type for "polarity", call it gpio_flags
platform/x86: thinkpad_acpi: Support for V9 DYTC platform profiles
platform/x86: thinkpad_acpi: Fix invalid fan speed on ThinkPad X120e
|
|
Like other drivers qeth is calling local_bh_enable() after napi_schedule()
to kick-start softirqs [0].
Since netif_napi_add_tx() and napi_enable() now take the netdev_lock()
mutex [1], move them out from under the BH protection. Same solution as in
commit a60558644e20 ("wifi: mt76: move napi_enable() from under BH")
Fixes: 1b23cdbd2bbc ("net: protect netdev->napi_list with netdev_lock()")
Link: https://lore.kernel.org/netdev/20240612181900.4d9d18d0@kernel.org/ [0]
Link: https://lore.kernel.org/netdev/20250115035319.559603-1-kuba@kernel.org/ [1]
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250212163659.2287292-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a check for the return value of mlxsw_sp_port_get_stats_raw()
in __mlxsw_sp_port_get_stats(). If mlxsw_sp_port_get_stats_raw()
returns an error, exit the function to prevent further processing
with potentially invalid data.
Fixes: 614d509aa1e7 ("mlxsw: Move ethtool_ops to spectrum_ethtool.c")
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250212152311.1332-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported following splat [1]
Make sure user-provided data contains one nul byte.
[1]
BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:633 [inline]
BUG: KMSAN: uninit-value in string+0x3ec/0x5f0 lib/vsprintf.c:714
string_nocheck lib/vsprintf.c:633 [inline]
string+0x3ec/0x5f0 lib/vsprintf.c:714
vsnprintf+0xa5d/0x1960 lib/vsprintf.c:2843
__request_module+0x252/0x9f0 kernel/module/kmod.c:149
team_mode_get drivers/net/team/team_core.c:480 [inline]
team_change_mode drivers/net/team/team_core.c:607 [inline]
team_mode_option_set+0x437/0x970 drivers/net/team/team_core.c:1401
team_option_set drivers/net/team/team_core.c:375 [inline]
team_nl_options_set_doit+0x1339/0x1f90 drivers/net/team/team_core.c:2662
genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x1214/0x12c0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2543
genl_rcv+0x40/0x60 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline]
netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1348
netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1892
sock_sendmsg_nosec net/socket.c:718 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:733
____sys_sendmsg+0x877/0xb60 net/socket.c:2573
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2627
__sys_sendmsg net/socket.c:2659 [inline]
__do_sys_sendmsg net/socket.c:2664 [inline]
__se_sys_sendmsg net/socket.c:2662 [inline]
__x64_sys_sendmsg+0x212/0x3c0 net/socket.c:2662
x64_sys_call+0x2ed6/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Reported-by: syzbot+1fcd957a82e3a1baa94d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1fcd957a82e3a1baa94d
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250212134928.1541609-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On HCI_OP_RESET command, firmware raises alive interrupt. Driver needs
to wait for this before sending other command. This patch fixes the potential
miss of alive interrupt due to which HCI_OP_RESET can timeout.
Expected flow:
If tx command is HCI_OP_RESET,
1. set data->gp0_received = false
2. send HCI_OP_RESET
3. wait for alive interrupt
Actual flow having potential race:
If tx command is HCI_OP_RESET,
1. send HCI_OP_RESET
1a. Firmware raises alive interrupt here and in ISR
data->gp0_received is set to true
2. set data->gp0_received = false
3. wait for alive interrupt
Signed-off-by: Kiran K <kiran.k@intel.com>
Fixes: 05c200c8f029 ("Bluetooth: btintel_pcie: Add handshake between driver and firmware")
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Closes: https://patchwork.kernel.org/project/bluetooth/patch/20241001104451.626964-1-kiran.k@intel.com/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Many drivers abuse the platform driver/bus system as it provides a
simple way to create and bind a device to a driver-specific set of
probe/release functions. Instead of doing that, and wasting all of the
memory associated with a platform device, here is a "faux" bus that
can be used instead.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/2025021026-atlantic-gibberish-3f0c@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In some cases observed during ESD tests, the TI SN65DSI83 cannot recover
from errors by itself. A full restart of the bridge is needed in those
cases to have the bridge output LVDS signals again.
Also, during tests, cases were observed where reading the status of the
bridge was not even possible. Indeed, in those cases, the bridge stops
to acknowledge I2C transactions. Only a full reset of the bridge (power
off/on) brings back the bridge to a functional state.
The TI SN65DSI83 has some error detection capabilities. Introduce an
error recovery mechanism based on this detection.
The errors detected are signaled through an interrupt. On system where
this interrupt is not available, the driver uses a polling monitoring
fallback to check for errors. When an error is present or when reading
the bridge status leads to an I2C failure, the recovery process is
launched.
Restarting the bridge needs to redo the initialization sequence. This
initialization sequence has to be done with the DSI data lanes driven in
LP11 state. In order to do that, the recovery process resets the whole
output path (i.e the path from the encoder to the connector) where the
bridge is located.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210132620.42263-5-herve.codina@bootlin.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The current code uses a the reset_pipe() local function to reset the
CRTC outputs.
drm_atomic_helper_reset_crtc() has been introduced recently and it
performs exact same operations.
In order to avoid code duplication, use the new helper instead of the
local function.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210132620.42263-4-herve.codina@bootlin.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_reset_crtc() allows to reset the CRTC active outputs.
This resets all active components available between the CRTC and
connectors.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210132620.42263-3-herve.codina@bootlin.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
If the driver initialization fails, the vkms_exit() function might
access an uninitialized or freed default_config pointer and it might
double free it.
Fix both possible errors by initializing default_config only when the
driver initialization succeeded.
Reported-by: Louis Chauvet <louis.chauvet@bootlin.com>
Closes: https://lore.kernel.org/all/Z5uDHcCmAwiTsGte@louis-chauvet-laptop/
Fixes: 2df7af93fdad ("drm/vkms: Add vkms_config type")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmremann@suse.de>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212084912.3196-1-jose.exposito89@gmail.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device ids for 6.14-rc3
Here are some new modem device ids and a couple of related cleanups of
the device id table.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.14-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: drop MeiG Smart defines
USB: serial: option: fix Telit Cinterion FN990A name
USB: serial: option: add Telit Cinterion FN990B compositions
USB: serial: option: add MeiG Smart SLM828
|
|
The Mediatek MT7922 WiFi device advertises FLR support, but it apparently
does not work, and all subsequent config reads return ~0:
pci 0000:01:00.0: [14c3:0616] type 00 class 0x028000 PCIe Endpoint
pciback 0000:01:00.0: not ready 65535ms after FLR; giving up
After an FLR, pci_dev_wait() waits for the device to become ready. Prior
to d591f6804e7e ("PCI: Wait for device readiness with Configuration RRS"),
it polls PCI_COMMAND until it is something other that PCI_POSSIBLE_ERROR
(~0). If it times out, pci_dev_wait() returns -ENOTTY and
__pci_reset_function_locked() tries the next available reset method.
Typically this is Secondary Bus Reset, which does work, so the MT7922 is
eventually usable.
After d591f6804e7e, if Configuration Request Retry Status Software
Visibility (RRS SV) is enabled, pci_dev_wait() polls PCI_VENDOR_ID until it
is something other than the special 0x0001 Vendor ID that indicates a
completion with RRS status.
When RRS SV is enabled, reads of PCI_VENDOR_ID should return either 0x0001,
i.e., the config read was completed with RRS, or a valid Vendor ID. On the
MT7922, it seems that all config reads after FLR return ~0 indefinitely.
When pci_dev_wait() reads PCI_VENDOR_ID and gets 0xffff, it assumes that's
a valid Vendor ID and the device is now ready, so it returns with success.
After pci_dev_wait() returns success, we restore config space and continue.
Since the MT7922 is not actually ready after the FLR, the restore fails and
the device is unusable.
We considered changing pci_dev_wait() to continue polling if a
PCI_VENDOR_ID read returns either 0x0001 or 0xffff. This "works" as it did
before d591f6804e7e, although we have to wait for the timeout and then fall
back to SBR. But it doesn't work for SR-IOV VFs, which *always* return
0xffff as the Vendor ID.
Mark Mediatek MT7922 WiFi devices to avoid the use of FLR completely. This
will cause fallback to another reset method, such as SBR.
Link: https://lore.kernel.org/r/20250212193516.88741-1-helgaas@kernel.org
Fixes: d591f6804e7e ("PCI: Wait for device readiness with Configuration RRS")
Link: https://github.com/QubesOS/qubes-issues/issues/9689#issuecomment-2582927149
Link: https://lore.kernel.org/r/Z4pHll_6GX7OUBzQ@mail-itl
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Cc: stable@vger.kernel.org
|
|
'struct scmi_imx_misc_ctrl_set_in' has a zero length array in the end,
The sizeof will not count 'value[]', and hence Tx size will be smaller
than actual size for Tx,and SCMI firmware will flag this as protocol
error.
Fix this by enlarge the Tx size with 'num * sizeof(__le32)' to count in
the size of data.
Fixes: 61c9f03e22fc ("firmware: arm_scmi: Add initial support for i.MX MISC protocol")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Tested-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250123063441.392555-1-peng.fan@oss.nxp.com>
(sudeep.holla: Commit rewording and replace hardcoded sizeof(__le32) value)
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
It's sole user (pci_xen_swiotlb_init()) is __init, too.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-ID: <e1198286-99ec-41c1-b5ad-e04e285836c9@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
When mapping a buffer for DMA via .map_page or .map_sg DMA operations,
there is no need to check the machine frames to be aligned according
to the mapped areas size. All what is needed in these cases is that the
buffer is contiguous at machine level.
So carve out the alignment check from range_straddles_page_boundary()
and move it to a helper called by xen_swiotlb_alloc_coherent() and
xen_swiotlb_free_coherent() directly.
Fixes: 9f40ec84a797 ("xen/swiotlb: add alignment check for dma buffers")
Reported-by: Jan Vejvalka <jan.vejvalka@lfmotol.cuni.cz>
Tested-by: Jan Vejvalka <jan.vejvalka@lfmotol.cuni.cz>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Perhaps unsurprisingly there are some platforms where the GTDT isn't
quite right and the Platforms Timer array overflows the length of the
overall table.
While the recently-added sanity checking isn't wrong, it makes it
impossible to boot the kernel on offending platforms. Try to hobble
along and limit the Platform Timer count to the bounds of the table.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Zheng Zengkai <zhengzengkai@huawei.com>
Cc: stable@vger.kernel.org
Fixes: 263e22d6bd1f ("ACPI: GTDT: Tighten the check for the array of platform timer structures")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20250128001749.3132656-1-oliver.upton@linux.dev
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The drm_writeback_cleanup_job() function frees "pos" so call
list_del(&pos->list_entry) first to avoid a use after free.
Fixes: 1914ba2b91ea ("drm: writeback: Create drmm variants for drm_writeback_connector initialization")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/78abd541-71e9-4b3b-a05d-2c7caf8d5b2f@stanley.mountain
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The drm_atomic_get_crtc_state() function returns error pointers and not
NULL. Update the check to check for error pointers as well as NULL.
Fixes: 88849f24e2ab ("drm/tests: Add test for drm_atomic_helper_check_modeset()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/c50f11c7-932c-47dc-b40f-4ada8b9b6679@stanley.mountain
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Starting with DPCD version 2.0 bits 6:3 of the DP_DSC_BITS_PER_PIXEL_INC
DPCD register contains the NativeYCbCr422_MAX_bpp_DELTA field, which can
be non-zero as opposed to earlier DPCD versions, hence decoding the
bit_per_pixel increment value at bits 2:0 in the same register requires
applying a mask, do so.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Fixes: 0c2287c96521 ("drm/display/dp: Add helper function to get DSC bpp precision")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212161851.4007005-1-imre.deak@intel.com
|
|
For XDP transmit case, swdata doesn't contain SKB but the
XDP Frame. Infer the correct swdata based on buffer type
and return the XDP Frame for XDP transmit case.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Link: https://patch.msgid.link/20250210-am65-cpsw-xdp-fixes-v1-3-ec6b1f7f1aca@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For successful XDP_TX and XDP_REDIRECT cases, the packet was received
successfully so update RX statistics. Use original received
packet length for that.
TX packets statistics are incremented on TX completion so don't
update it while TX queueing.
If xdp_convert_buff_to_frame() fails, increment tx_dropped.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Link: https://patch.msgid.link/20250210-am65-cpsw-xdp-fixes-v1-2-ec6b1f7f1aca@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the XDP program doesn't result in XDP_PASS then we leak the
memory allocated by am65_cpsw_build_skb().
It is pointless to allocate SKB memory before running the XDP
program as we would be wasting CPU cycles for cases other than XDP_PASS.
Move the SKB allocation after evaluating the XDP program result.
This fixes the memleak. A performance boost is seen for XDP_DROP test.
XDP_DROP test:
Before: 460256 rx/s 0 err/s
After: 784130 rx/s 0 err/s
Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20250210-am65-cpsw-xdp-fixes-v1-1-ec6b1f7f1aca@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-02-11 (idpf, ixgbe, igc)
For idpf:
Sridhar fixes a couple issues in handling of RSC packets.
Josh adds a call to set_real_num_queues() to keep queue count in sync.
For ixgbe:
Piotr removes missed IS_ERR() removal when ERR_PTR usage was removed.
For igc:
Zdenek Bouska fixes reporting of Rx timestamp with AF_XDP.
Siang sets buffer type on empty frame to ensure proper handling.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: Set buffer type for empty frames in igc_init_empty_frame
igc: Fix HW RX timestamp when passed by ZC XDP
ixgbe: Fix possible skb NULL pointer dereference
idpf: call set_real_num_queues in idpf_open
idpf: record rx queue in skb for RSC packets
idpf: fix handling rsc packet with a single segment
====================
Link: https://patch.msgid.link/20250211214343.4092496-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit 325ba852d148 ("drm/i2c: move TDA998x driver under
drivers/gpu/drm/bridge") deleted the drivers/gpu/drm/i2c/ subdir, but
didn't update upper level Makefile. Drop corresponding line to fix build
issues.
Fixes: 325ba852d148 ("drm/i2c: move TDA998x driver under drivers/gpu/drm/bridge")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/dri-devel/20250213113841.7645b74c@canb.auug.org.au
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213-fix-tda-v1-1-d3d34b2dc907@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
It malicious user provides a small pptable through sysfs and then
a bigger pptable, it may cause buffer overflow attack in function
smu_sys_set_pp_table().
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
