summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-02-27accel/amdxdna: Check interrupt register before mailbox_rx_worker exitsLizhi Hou
There is a timeout failure been found during stress tests. If the firmware generates a mailbox response right after driver clears the mailbox channel interrupt register, the hardware will not generate an interrupt for the response. This causes the unexpected mailbox command timeout. To handle this failure, driver checks the interrupt register before exiting mailbox_rx_worker(). If there is a new response, driver goes back to process it. Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250226161810.4188334-1-lizhi.hou@amd.com
2025-02-27drm/rockchip: Fix shutdown when no drm-device is set upHeiko Stuebner
When the drm-driver probes, it mainly creates the component device, where all the sub-drivers (vops, hdmi, etc) hook into. This will cause the shutdown handler to get called on shutdown, even though the drm-device might not have been set up, or the component bind might have failed. So use the new component helper to check whether the drm-device is up and only then call the drm-atomic helper to release all the drm magic. This prevents failures when the drm-device is never set, or has been freed up already for example by a probe-defer during the component bind. Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20250220234141.2788785-3-heiko@sntech.de
2025-02-27drivers: base: component: add function to query the bound statusHeiko Stuebner
The component helpers already expose the bound status in debugfs, but at times it might be necessary to also check that state in the kernel and act differently depending on the result. For example the shutdown handler of a drm-driver might need to stop a whole output pipeline if the drm device is up and running, but may run into problems if that drm-device has never been set up before, for example because the binding deferred. So add a little helper that returns the bound status for a componet device. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20250220234141.2788785-2-heiko@sntech.de
2025-02-27drm/rockchip: vop2: Consistently use dev_err_probe()Cristian Ciocaltea
Replace drm_err() calls in vop2_bind() and vop2_create_crtcs() with dev_err_probe(), to simplify error handling and improve consistency. Additionally, ensure the already existing dev_err_probe() invocations pass drm->dev instead of dev as their first argument, so that we get the actual reason in case of -EPROBE_DEFER errors: platform display-subsystem: deferred probe pending: (reason unknown) vs. platform display-subsystem: deferred probe pending: rockchip-drm: <actual reason> While at it, add the missing '\n' to some of the message strings. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20250223-vop2-hdmi1-disp-modes-v2-2-f4cec5e06fbe@collabora.com
2025-02-27drm/rockchip: vop2: Improve display modes handling on RK3588 HDMI1Cristian Ciocaltea
The RK3588 specific implementation is currently quite limited in terms of handling the full range of display modes supported by the connected screens, e.g. 2560x1440@75Hz, 2048x1152@60Hz, 1024x768@60Hz are just a few of them. Additionally, it doesn't cope well with non-integer refresh rates like 59.94, 29.97, 23.98, etc. Make use of HDMI1 PHY PLL as a more accurate DCLK source to handle all display modes up to 4K@60Hz. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20250223-vop2-hdmi1-disp-modes-v2-1-f4cec5e06fbe@collabora.com
2025-02-27drm/rockchip: analogix_dp: Expand device data to support multiple edp displayDamon Ding
There are two main modifications: one is expanding struct rockchip_dp_chip_data to an array, and the other is adding &rockchip_dp_chip_data.reg to separate different edp devices. Signed-off-by: Damon Ding <damon.ding@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20250224081325.96724-3-damon.ding@rock-chips.com
2025-02-27drm/rockchip: analogix_dp: Use formalized struct definition for grf fieldDamon Ding
The formalized struct definition will makes grf field operations more concise and easier to extend. Signed-off-by: Damon Ding <damon.ding@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20250224081325.96724-2-damon.ding@rock-chips.com
2025-02-27drm/bridge: synopsys: Add audio support for dw-hdmi-qpSugar Zhang
Register the dw-hdmi-qp bridge driver as an HDMI audio codec. The register values computation functions (for n) are based on the downstream driver, as well as the register writing functions. The driver uses the generic HDMI Codec framework in order to implement the HDMI audio support. Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20250217215641.372723-2-detlev.casanova@collabora.com
2025-02-27drm/bridge: ti-sn65dsi83: Support negative DE polarityAlexander Stein
Polarity for DE is stored in bridge state. Use this flag for setting the DE polarity in the bridge. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Tested-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250225135114.801884-1-alexander.stein@ew.tq-group.com
2025-02-27drm/panel: Add Visionox RM692E5 panel driverEugene Lepshy
Add the driver for Visionox RM692E5 panel support found in Nothing Phone (1). Signed-off-by: Eugene Lepshy <fekz115@gmail.com> Co-developed-by: Danila Tikhonov <danila@jiaxyga.com> Signed-off-by: Danila Tikhonov <danila@jiaxyga.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250217222431.82522-3-danila@jiaxyga.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250217222431.82522-3-danila@jiaxyga.com
2025-02-27drm/panel: add Raydium RM67200 panel driverSebastian Reichel
The Rockchip W552793DBA-V10 display/touchscreen board contains a Wanchanglong W552793BAA panel, which in turn is using a Raydium RM67200 MIPI-DSI controller. Add a DSI panel driver for it. The W552793BAA panel init sequence has been taken from the RK3588 EVB1 vendor kernel devicetree. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Andy Yan <andyshrk@163.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20250225-raydium-rm67200-v3-2-d9e1010dd8ab@kernel.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250225-raydium-rm67200-v3-2-d9e1010dd8ab@kernel.org
2025-02-26drm/vc4: move to devm_platform_ioremap_resource() usageAnusha Srivatsa
Replace platform_get_resource_byname + devm_ioremap_resource with just devm_platform_ioremap_resource() Used Coccinelle to do this change. SmPl patch: //rule s/(devm_)platform_get_resource_byname + //(devm_)ioremap/devm_platform_ioremap_resource. @rule_3@ identifier res; expression ioremap; identifier pdev; constant mem; expression name; @@ -struct resource *res; <+... -res = platform_get_resource_byname(pdev,mem,name); <... -if (!res) { -... -} ...> -ioremap = devm_ioremap(...); +ioremap = devm_platform_ioremap_resource_byname(pdev,name); ...+> v2: Change the SmPl patch to work on multiple occurences of the pattern. This also fixes the compilation error. v3: Do not convert "hd" resource to follow the rest of the refactor. (Maxime) v4: fix compiler error Cc: Maxime Ripard <mripard@kernel.org> Cc: Dave Stevenson <dave.stevenson@raspberrypi.com> Cc: Maíra Canal <mcanal@igalia.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Anusha Srivatsa <asrivats@redhat.com> Link: https://lore.kernel.org/r/20250225-memory-drm-misc-next-v1-11-9d0e8761107a@redhat.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-02-26drm/tiny: move to devm_platform_ioremap_resource() usageAnusha Srivatsa
Replace platform_get_resource + devm_ioremap_resource with just devm_platform_ioremap_resource() Used Coccinelle to do this change. SmPl patch: @rule_1@ identifier res; expression ioremap_res; identifier pdev; @@ -struct resource *res; ... -res = platform_get_resource(pdev,...); -ioremap_res = devm_ioremap_resource(...); +ioremap_res = devm_platform_ioremap_resource(pdev,0); Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Reviewed-by: Maxime Ripard <mripard@kernel.org> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Anusha Srivatsa <asrivats@redhat.com> Link: https://lore.kernel.org/r/20250225-memory-drm-misc-next-v1-10-9d0e8761107a@redhat.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-02-26drm/stm: move to devm_platform_ioremap_resource() usageAnusha Srivatsa
Replace platform_get_resource + devm_ioremap_resource with just devm_platform_ioremap_resource() Used Coccinelle to do this change. SmPl patch: @rule_1@ identifier res; expression ioremap_res; identifier pdev; @@ -struct resource *res; ... -res = platform_get_resource(pdev,...); -ioremap_res = devm_ioremap_resource(...); +ioremap_res = devm_platform_ioremap_resource(pdev,0); Cc: Yannick Fertre <yannick.fertre@foss.st.com> Cc: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Cc: Philippe Cornu <philippe.cornu@foss.st.com> Acked-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Signed-off-by: Anusha Srivatsa <asrivats@redhat.com> Acked-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com> Link: https://lore.kernel.org/r/20250225-memory-drm-misc-next-v1-8-9d0e8761107a@redhat.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-02-26drm/mediatek: move to devm_platform_ioremap_resource() usageAnusha Srivatsa
Replace platform_get_resource + devm_ioremap_resource with just devm_platform_ioremap_resource() Used Coccinelle to do this change. SmPl patch: @rule_1@ identifier res; expression ioremap_res; identifier pdev; @@ -struct resource *res; ... -res = platform_get_resource(pdev,...); -ioremap_res = devm_ioremap_resource(...); +ioremap_res = devm_platform_ioremap_resource(pdev,0); Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Anusha Srivatsa <asrivats@redhat.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20250225-memory-drm-misc-next-v1-4-9d0e8761107a@redhat.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-02-26drm/aspeed: move to devm_platform_ioremap_resource() usageAnusha Srivatsa
Replace platform_get_resource + devm_ioremap_resource with just devm_platform_ioremap_resource() Used Coccinelle to do this change. SmPl patch: @rule_1@ identifier res; expression ioremap_res; identifier pdev; @@ -struct resource *res; ... -res = platform_get_resource(pdev,...); -ioremap_res = devm_ioremap_resource(...); +ioremap_res = devm_platform_ioremap_resource(pdev,0); Cc: Joel Stanley <joel@jms.id.au> Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au> Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Anusha Srivatsa <asrivats@redhat.com> Link: https://lore.kernel.org/r/20250225-memory-drm-misc-next-v1-1-9d0e8761107a@redhat.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-02-25drm/msm/dp: Add support for LTTPR handlingAbel Vesa
Link Training Tunable PHY Repeaters (LTTPRs) are defined in DisplayPort 1.4a specification. As the name suggests, these PHY repeaters are capable of adjusting their output for link training purposes. According to the DisplayPort standard, LTTPRs have two operating modes: - non-transparent - it replies to DPCD LTTPR field specific AUX requests, while passes through all other AUX requests - transparent - it passes through all AUX requests. Switching between these two modes is done by the DPTX by issuing an AUX write to the DPCD PHY_REPEATER_MODE register. The msm DP driver is currently lacking any handling of LTTPRs. This means that if at least one LTTPR is found between DPTX and DPRX, the link training would fail if that LTTPR was not already configured in transparent mode. The section 3.6.6.1 from the DisplayPort v2.0 specification mandates that before link training with the LTTPR is started, the DPTX may place the LTTPR in non-transparent mode by first switching to transparent mode and then to non-transparent mode. This operation seems to be needed only on first link training and doesn't need to be done again until device is unplugged. It has been observed on a few X Elite-based platforms which have such LTTPRs in their board design that the DPTX needs to follow the procedure described above in order for the link training to be successful. So add support for reading the LTTPR DPCD caps to figure out the number of such LTTPRs first. Then, for platforms (or Type-C dongles) that have at least one such an LTTPR, set its operation mode to transparent mode first and then to non-transparent, just like the mentioned section of the specification mandates. Tested-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250203-drm-dp-msm-add-lttpr-transparent-mode-set-v5-4-c865d0e56d6e@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-25drm/i915/dp: Use the generic helper to control LTTPR transparent modeAbel Vesa
LTTPRs operating modes are defined by the DisplayPort standard and the generic framework now provides a helper to switch between them, which is handling the explicit disabling of non-transparent mode and its disable->enable sequence mentioned in the DP Standard v2.0 section 3.6.6.1. So use the new drm generic helper instead as it makes the code a bit cleaner. Since the driver specific implementation holds the lttrp_common_caps, if the call to the drm generic helper fails, the lttrp_common_caps need to be updated as the helper has already rolled back to transparent mode. Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250203-drm-dp-msm-add-lttpr-transparent-mode-set-v5-3-c865d0e56d6e@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-25drm/nouveau/dp: Use the generic helper to control LTTPR transparent modeAbel Vesa
LTTPRs operating modes are defined by the DisplayPort standard and the generic framework now provides a helper to switch between them, which is handling the explicit disabling of non-transparent mode and its disable->enable sequence mentioned in the DP Standard v2.0 section 3.6.6.1. So use the new drm generic helper instead as it makes the code a bit cleaner. Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Danilo Krummrich <dakr@kernel.org> # via IRC Link: https://patchwork.freedesktop.org/patch/msgid/20250203-drm-dp-msm-add-lttpr-transparent-mode-set-v5-2-c865d0e56d6e@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-25drm/dp: Add helper to set LTTPRs in transparent modeAbel Vesa
According to the DisplayPort standard, LTTPRs have two operating modes: - non-transparent - it replies to DPCD LTTPR field specific AUX requests, while passes through all other AUX requests - transparent - it passes through all AUX requests. Switching between this two modes is done by the DPTX by issuing an AUX write to the DPCD PHY_REPEATER_MODE register. Add a generic helper that allows switching between these modes. Also add a generic wrapper for the helper that handles the explicit disabling of non-transparent mode and its disable->enable sequence mentioned in the DP Standard v2.0 section 3.6.6.1. Do this in order to move this handling out of the vendor specific driver implementation into the generic framework. Tested-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250203-drm-dp-msm-add-lttpr-transparent-mode-set-v5-1-c865d0e56d6e@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-25Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging to get fixes from v6.14-rc4. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2025-02-25drm: panel: Add a panel driver for the Summit displaySasha Finkelstein
This is the display panel used for the touchbar on laptops that have it. Co-developed-by: Nick Chan <towinchenmi@gmail.com> Signed-off-by: Nick Chan <towinchenmi@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com> Link: https://lore.kernel.org/r/20250217-adpdrm-v7-3-ca2e44b3c7d8@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250217-adpdrm-v7-3-ca2e44b3c7d8@gmail.com
2025-02-25drm/panel: simple: Add BOE AV123Z7M-N17 panelMaud Spierings
Add support for the BOE AV123Z7M-N17 12.3" LVDS panel. Signed-off-by: Maud Spierings <maudspierings@gocontroll.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250224-initial_display-v1-8-5ccbbf613543@gocontroll.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250224-initial_display-v1-8-5ccbbf613543@gocontroll.com
2025-02-25drm/panel: simple: add BOE AV101HDT-A10 panelMaud Spierings
add support for the BOE AV101HDT-A10 10.1" LVDS panel Signed-off-by: Maud Spierings <maudspierings@gocontroll.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250224-initial_display-v1-7-5ccbbf613543@gocontroll.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250224-initial_display-v1-7-5ccbbf613543@gocontroll.com
2025-02-25drm/mipi-dsi: extend "multi" functions and use them in sony-td4353-jdiTejas Vipin
Removes mipi_dsi_dcs_set_tear_off and replaces it with a multi version as after replacing it in sony-td4353-jdi, it doesn't appear anywhere else. sony-td4353-jdi is converted to use multi style functions, including mipi_dsi_dcs_set_tear_off_multi. Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250220045721.145905-1-tejasvipin76@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250220045721.145905-1-tejasvipin76@gmail.com
2025-02-25Merge tag 'v6.14-rc4' into drm-nextDave Airlie
Backmerge Linux 6.14-rc4 at the request of tzimmermann so misc-next can base on rc4. Signed-off-by: Dave Airlie <airlied@redhat.com>
2025-02-24drm/repaper: fix integer overflows in repeat functionsNikita Zhandarovich
There are conditions, albeit somewhat unlikely, under which right hand expressions, calculating the end of time period in functions like repaper_frame_fixed_repeat(), may overflow. For instance, if 'factor10x' in repaper_get_temperature() is high enough (170), as is 'epd->stage_time' in repaper_probe(), then the resulting value of 'end' will not fit in unsigned int expression. Mitigate this by casting 'epd->factored_stage_time' to wider type before any multiplication is done. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 3589211e9b03 ("drm/tinydrm: Add RePaper e-ink driver") Cc: stable@vger.kernel.org Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Signed-off-by: Alex Lanzano <lanzano.alex@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250116134801.22067-1-n.zhandarovich@fintech.ru
2025-02-24drm/bridge: ti-sn65dsi86: Check for CONFIG_PWM using IS_REACHABLE()Uwe Kleine-König
Currently CONFIG_PWM is a bool but I intend to change it to tristate. If CONFIG_PWM=m in the configuration, the cpp symbol CONFIG_PWM isn't defined and so the PWM code paths in the ti-sn65dsi86 driver are not used. The correct way to check for CONFIG_PWM is using IS_REACHABLE which does the right thing for all cases CONFIG_DRM_TI_SN65DSI86 ∈ { y, m } x CONFIG_PWM ∈ { y, m, n }. There is no change until CONFIG_PWM actually becomes tristate. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250217174936.758420-2-u.kleine-koenig@baylibre.com
2025-02-24drm/sched: Move internal prototypes to internal headerTvrtko Ursulin
Now that we have a header file for internal scheduler interfaces we can move some more prototypes into it. By doing that we eliminate the chance of drivers trying to use something which was not intended to be used. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Christian König <christian.koenig@amd.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Philipp Stanner <phasta@kernel.org> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250221105038.79665-6-tvrtko.ursulin@igalia.com
2025-02-24drm/sched: Move drm_sched_entity_is_ready to internal headerTvrtko Ursulin
Helper is for scheduler internal use so lets hide it from DRM drivers completely. At the same time we change the method of checking whethere there is anything in the queue from peeking to looking at the node count. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Christian König <christian.koenig@amd.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Philipp Stanner <phasta@kernel.org> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250221105038.79665-5-tvrtko.ursulin@igalia.com
2025-02-24drm/amdgpu: Pop jobs from the queue more robustlyTvrtko Ursulin
Replace a copy of DRM scheduler's to_drm_sched_job with a copy of a newly added drm_sched_entity_queue_pop. This allows breaking the hidden dependency that queue_node has to be the first element in struct drm_sched_job. A comment is also added with a reference to the mailing list discussion explaining the copied helper will be removed when the whole broken amdgpu_job_stop_all_jobs_on_sched is removed. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Christian König <christian.koenig@amd.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Philipp Stanner <phasta@kernel.org> Cc: Zhang, Hawking <Hawking.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250221105038.79665-3-tvrtko.ursulin@igalia.com
2025-02-24drm/sched: Add internal job peek/pop APITvrtko Ursulin
Idea is to add helpers for peeking and popping jobs from entities with the goal of decoupling the hidden assumption in the code that queue_node is the first element in struct drm_sched_job. That assumption usually comes in the form of: while ((job = to_drm_sched_job(spsc_queue_pop(&entity->job_queue)))) Which breaks if the queue_node is re-positioned due to_drm_sched_job being implemented with a container_of. This also allows us to remove duplicate definitions of to_drm_sched_job. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Christian König <christian.koenig@amd.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Philipp Stanner <phasta@kernel.org> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250221105038.79665-2-tvrtko.ursulin@igalia.com
2025-02-23Merge tag 'i2c-for-6.14-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "Revert one cleanup which turned out to eat too much stack space" * tag 'i2c-for-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: Allocate temporary client dynamically
2025-02-23Merge tag 'edac_urgent_for_v6.14_rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fix from Borislav Petkov: - Have qcom_edac use the correct interrupt enable register to configure the RAS interrupt lines * tag 'edac_urgent_for_v6.14_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/qcom: Correct interrupt enable register configuration
2025-02-22Merge tag 'irq-urgent-2025-02-22' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "Fix miscellaneous irqchip bugs" * tag 'irq-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/qcom-pdc: Workaround hardware register bug on X1E80100 irqchip/jcore-aic, clocksource/drivers/jcore: Fix jcore-pit interrupt request irqchip/gic-v3: Fix rk3399 workaround when secure interrupts are enabled
2025-02-22i2c: core: Allocate temporary client dynamicallyGeert Uytterhoeven
drivers/i2c/i2c-core-base.c: In function ‘i2c_detect.isra’: drivers/i2c/i2c-core-base.c:2544:1: warning: the frame size of 1312 bytes is larger than 1024 bytes [-Wframe-larger-than=] 2544 | } | ^ Fix this by allocating the temporary client structure dynamically, as it is a rather large structure (1216 bytes, depending on kernel config). This is basically a revert of the to-be-fixed commit with some checkpatch improvements. Fixes: 735668f8e5c9 ("i2c: core: Allocate temp client on the stack in i2c_detect") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Su Hui <suhui@nfschina.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> [wsa: updated commit message, merged tags from similar patch] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2025-02-21Merge tag 'soc-fixes-6.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC fixes from Arnd Bergmann: "Two people stepped up as platform co-maintainers: Andrew Jeffery for ASpeed and Janne Grunau for Apple. The rockchip platform gets 9 small fixes for devicetree files, addressing both compile-time warnings and board specific bugs. One bugfix for the optee firmware driver addresses a reboot-time hang. Two drivers need improved Kconfig dependencies to allow wider compile- testing while hiding the drivers on platforms that can't use them. ARM SCMI and loongson-guts drivers get minor bugfixes" * tag 'soc-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: soc: loongson: loongson2_guts: Add check for devm_kstrdup() tee: optee: Fix supplicant wait loop platform: cznic: CZNIC_PLATFORMS should depend on ARCH_MVEBU firmware: imx: IMX_SCMI_MISC_DRV should depend on ARCH_MXC MAINTAINERS: arm: apple: Add Janne as maintainer MAINTAINERS: Mark Andrew as M: for ASPEED MACHINE SUPPORT firmware: arm_scmi: imx: Correct tx size of scmi_imx_misc_ctrl_set arm64: dts: rockchip: adjust SMMU interrupt type on rk3588 arm64: dts: rockchip: disable IOMMU when running rk3588 in PCIe endpoint mode dt-bindings: rockchip: pmu: Ensure all properties are defined arm64: defconfig: Enable TISCI Interrupt Router and Aggregator arm64: dts: rockchip: Fix lcdpwr_en pin for Cool Pi GenBook arm64: dts: rockchip: fix fixed-regulator renames on rk3399-gru devices arm64: dts: rockchip: Disable DMA for uart5 on px30-ringneck arm64: dts: rockchip: Move uart5 pin configuration to px30 ringneck SoM arm64: dts: rockchip: change eth phy mode to rgmii-id for orangepi r1 plus lts arm64: dts: rockchip: Fix broken tsadc pinctrl names for rk3588
2025-02-21Merge tag 'drm-fixes-2025-02-22' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly drm fixes pull request, lots of small things all over, msm has a bunch of things but all very small, xe, i915, a fix for the cgroup dmem controller. core: - remove MAINTAINERS entry cgroup/dmem: - use correct function for pool descendants panel: - fix signal polarity issue jd9365da-h3 nouveau: - folio handling fix - config fix amdxdna: - fix missing header xe: - Fix error handling in xe_irq_install - Fix devcoredump format i915: - Use spin_lock_irqsave() in interruptible context on guc submission - Fixes on DDI and TRANS programming - Make sure all planes in use by the joiner have their crtc included - Fix 128b/132b modeset issues msm: - More catalog fixes: - to skip watchdog programming through top block if its not present - fix the setting of WB mask to ensure the WB input control is programmed correctly through ping-pong - drop lm_pair for sm6150 as that chipset does not have any 3dmerge block - Fix the mode validation logic for DP/eDP to account for widebus (2ppc) to allow high clock resolutions - Fix to disable dither during encoder disable as otherwise this was causing kms_writeback failure due to resource sharing between WB and DSI paths as DSI uses dither but WB does not - Fixes for virtual planes, namely to drop extraneous return and fix uninitialized variables - Fix to avoid spill-over of DSC encoder block bits when programming the bits-per-component - Fixes in the DSI PHY to protect against concurrent access of PHY_CMN_CLK_CFG regs between clock and display drivers - Core/GPU: - Fix non-blocking fence wait incorrectly rounding up to 1 jiffy timeout - Only print GMU fw version once, instead of each time the GPU resumes" * tag 'drm-fixes-2025-02-22' of https://gitlab.freedesktop.org/drm/kernel: (28 commits) drm/i915/dp: Fix disabling the transcoder function in 128b/132b mode drm/i915/dp: Fix error handling during 128b/132b link training accel/amdxdna: Add missing include linux/slab.h MAINTAINERS: Remove myself drm/nouveau/pmu: Fix gp10b firmware guard cgroup/dmem: Don't open-code css_for_each_descendant_pre drm/xe/guc: Fix size_t print format drm/xe: Make GUC binaries dump consistent with other binaries in devcoredump drm/i915: Make sure all planes in use by the joiner have their crtc included drm/i915/ddi: Fix HDMI port width programming in DDI_BUF_CTL drm/i915/dsi: Use TRANS_DDI_FUNC_CTL's own port width macro drm/xe: Fix error handling in xe_irq_install() drm/i915/gt: Use spin_lock_irqsave() in interruptible context drm/msm/dsi/phy: Do not overwite PHY_CMN_CLK_CFG1 when choosing bitclk source drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG1 against clock driver drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG0 updated from driver side drm/msm/dpu: Drop extraneous return in dpu_crtc_reassign_planes() drm/msm/dpu: Don't leak bits_per_component into random DSC_ENC fields drm/msm/dpu: Disable dither in phys encoder cleanup drm/msm/dpu: Fix uninitialized variable ...
2025-02-21Merge tag 'block-6.14-20250221' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: - NVMe pull request via Keith: - FC controller state check fixes (Daniel) - PCI Endpoint fixes (Damien) - TCP connection failure fixe (Caleb) - TCP handling C2HTermReq PDU (Maurizio) - RDMA queue state check (Ruozhu) - Apple controller fixes (Hector) - Target crash on disbaled namespace (Hannes) - MD pull request via Yu: - Fix queue limits error handling for raid0, raid1 and raid10 - Fix for a NULL pointer deref in request data mapping - Code cleanup for request merging * tag 'block-6.14-20250221' of git://git.kernel.dk/linux: nvme: only allow entering LIVE from CONNECTING state nvme-fc: rely on state transitions to handle connectivity loss apple-nvme: Support coprocessors left idle apple-nvme: Release power domains when probe fails nvmet: Use enum definitions instead of hardcoded values nvme: Cleanup the definition of the controller config register fields nvme/ioctl: add missing space in err message nvme-tcp: fix connect failure on receiving partial ICResp PDU nvme: tcp: Fix compilation warning with W=1 nvmet: pci-epf: Avoid RCU stalls under heavy workload nvmet: pci-epf: Do not uselessly write the CSTS register nvmet: pci-epf: Correctly initialize CSTS when enabling the controller nvmet-rdma: recheck queue state is LIVE in state lock in recv done nvmet: Fix crash when a namespace is disabled nvme-tcp: add basic support for the C2HTermReq PDU nvme-pci: quirk Acer FA100 for non-uniqueue identifiers block: fix NULL pointer dereferenced within __blk_rq_map_sg block/merge: remove unnecessary min() with UINT_MAX md/raid*: Fix the set_queue_limits implementations
2025-02-21bus: mhi: host: Avoid possible uninitialized fw_load_typeJeffrey Hugo
If mhi_fw_load_handler() bails out early because the EE is not capable of loading firmware, we may reference fw_load_type in cleanup which is uninitialized at this point. The cleanup code checks fw_load_type as a proxy for knowing if fbc_image was allocated and needs to be freed, but we can directly test for that. This avoids the possible uninitialized access and appears to be clearer code. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/e3148ac4-7bb8-422d-ae0f-18a8eb15e269@stanley.mountain/ Fixes: f88f1d0998ea ("bus: mhi: host: Add a policy to enable image transfer via BHIe in PBL") Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250214162109.3555300-1-quic_jhugo@quicinc.com
2025-02-21Merge tag 'acpi-6.14-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Fix a memory leak in the ACPI platform_profile driver (Kurt Borja)" * tag 'acpi-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: platform_profile: Fix memory leak in profile_class_is_visible()
2025-02-21Merge tag 'mtd/fixes-for-6.14-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd fixes from Miquel Raynal: "The two most important fixes in this list are probably the SST write failure and the Qcom raw NAND controller probe failure which are due to some refactoring, otherwise there has been a series of misc fixes on the Cadence raw NAND controller driver and especially on the DMA side" * tag 'mtd/fixes-for-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: cadence: fix unchecked dereference mtd: spi-nor: sst: Fix SST write failure dt-bindings: mtd: cadence: document required clock-names mtd: rawnand: qcom: fix broken config in qcom_param_page_type_exec mtd: rawnand: cadence: fix incorrect device in dma_unmap_single mtd: rawnand: cadence: use dma_map_resource for sdma address mtd: rawnand: cadence: fix error code in cadence_nand_init()
2025-02-21Merge tag 'gpio-fixes-for-v6.14-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: "There are two fixes for GPIO core: one adds missing retval checks to older code, while the second adds SRCU synchronization to legs in code that were missed during the big rework a few cycles back. There's also one small driver fix: - check the return value of the get_direction() callback in struct gpio_chip - protect the multi-line get/set legs in GPIO core with SRCU - fix a race condition in gpio-vf610" * tag 'gpio-fixes-for-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpiolib: don't bail out if get_direction() fails in gpiochip_add_data() gpiolib: protect gpio_chip with SRCU in array_info paths in multi get/set gpio: vf610: add locking to gpio direction functions gpiolib: check the return value of gpio_chip::get_direction()
2025-02-21drm/atomic-helper: Add a note in drm_atomic_helper_reset_crtc() kernel-docHerve Codina
As suggested in [0], add a note indicating that drm_atomic_helper_reset_crtc() can be a no-op in some cases. [0]:https://lore.kernel.org/all/Z7XfnPGDYspwG42y@phenom.ffwll.local/ Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20250220140406.593314-1-herve.codina@bootlin.com Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
2025-02-21irqchip/qcom-pdc: Workaround hardware register bug on X1E80100Stephan Gerhold
On X1E80100, there is a hardware bug in the register logic of the IRQ_ENABLE_BANK register: While read accesses work on the normal address, all write accesses must be made to a shifted address. Without a workaround for this, the wrong interrupt gets enabled in the PDC and it is impossible to wakeup from deep suspend (CX collapse). This has not caused problems so far, because the deep suspend state was not enabled. A workaround is required now since work is ongoing to fix this. The PDC has multiple "DRV" regions, each one has a size of 0x10000 and provides the same set of registers for a particular client in the system. Linux is one the clients and uses DRV region 2 on X1E. Each "bank" inside the DRV region consists of 32 interrupt pins that can be enabled using the IRQ_ENABLE_BANK register: IRQ_ENABLE_BANK[bank] = base + IRQ_ENABLE_BANK + bank * sizeof(u32) On X1E, this works as intended for read access. However, write access to most banks is shifted by 2: IRQ_ENABLE_BANK_X1E[0] = IRQ_ENABLE_BANK[-2] IRQ_ENABLE_BANK_X1E[1] = IRQ_ENABLE_BANK[-1] IRQ_ENABLE_BANK_X1E[2] = IRQ_ENABLE_BANK[0] = IRQ_ENABLE_BANK[2 - 2] IRQ_ENABLE_BANK_X1E[3] = IRQ_ENABLE_BANK[1] = IRQ_ENABLE_BANK[3 - 2] IRQ_ENABLE_BANK_X1E[4] = IRQ_ENABLE_BANK[2] = IRQ_ENABLE_BANK[4 - 2] IRQ_ENABLE_BANK_X1E[5] = IRQ_ENABLE_BANK[5] (this one works as intended) The negative indexes underflow to banks of the previous DRV/client region: IRQ_ENABLE_BANK_X1E[drv 2][bank 0] = IRQ_ENABLE_BANK[drv 2][bank -2] = IRQ_ENABLE_BANK[drv 1][bank 5-2] = IRQ_ENABLE_BANK[drv 1][bank 3] = IRQ_ENABLE_BANK[drv 1][bank 0 + 3] IRQ_ENABLE_BANK_X1E[drv 2][bank 1] = IRQ_ENABLE_BANK[drv 2][bank -1] = IRQ_ENABLE_BANK[drv 1][bank 5-1] = IRQ_ENABLE_BANK[drv 1][bank 4] = IRQ_ENABLE_BANK[drv 1][bank 1 + 3] Introduce a workaround for the bug by matching the qcom,x1e80100-pdc compatible and apply the offsets as shown above: - Bank 0...1: previous DRV region, bank += 3 - Bank 1...4: our DRV region, bank -= 2 - Bank 5: our DRV region, no fixup required The PDC node in the device tree only describes the DRV region for the Linux client, but the workaround also requires to map parts of the previous DRV region to issue writes there. To maintain compatibility with old device trees, obtain the base address of the preceeding region by applying the -0x10000 offset. Note that this is also more correct from a conceptual point of view: It does not really make use of the other region; it just issues shifted writes that end up in the registers of the Linux associated DRV region 2. Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/all/20250218-x1e80100-pdc-hw-wa-v2-1-29be4c98e355@linaro.org
2025-02-20Merge tag 'for-v6.14-rc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply fixes from Sebastian Reichel: - core: Fix extension related lockdep warning for LED triggers - axp20x-battery: Fix fault handling for AXP717 - da9150-fg: fix potential overflow * tag 'for-v6.14-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: supply: axp20x_battery: Fix fault handling for AXP717 power: supply: core: Fix extension related lockdep warning power: supply: da9150-fg: fix potential overflow
2025-02-20Merge tag 'ata-6.14-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux Pull ata fix from Niklas Cassel: - Fix an unintentional masking of AHCI ports when the device tree does not define port child nodes (Damien) * tag 'ata-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ata: libahci_platform: Do not set mask_port_map when not needed
2025-02-21Merge tag 'drm-msm-fixes-2025-02-20' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes Fixes for v6.14-rc4 Display: * More catalog fixes: - to skip watchdog programming through top block if its not present - fix the setting of WB mask to ensure the WB input control is programmed correctly through ping-pong - drop lm_pair for sm6150 as that chipset does not have any 3dmerge block * Fix the mode validation logic for DP/eDP to account for widebus (2ppc) to allow high clock resolutions * Fix to disable dither during encoder disable as otherwise this was causing kms_writeback failure due to resource sharing between * WB and DSI paths as DSI uses dither but WB does not * Fixes for virtual planes, namely to drop extraneous return and fix uninitialized variables * Fix to avoid spill-over of DSC encoder block bits when programming the bits-per-component * Fixes in the DSI PHY to protect against concurrent access of PHY_CMN_CLK_CFG regs between clock and display drivers Core/GPU: * Fix non-blocking fence wait incorrectly rounding up to 1 jiffy timeout * Only print GMU fw version once, instead of each time the GPU resumes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtt2AODBXdod8ULXcAygf_qYvwRDVeUVtODx=2jErp6cA@mail.gmail.com
2025-02-21Merge tag 'drm-intel-fixes-2025-02-20' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes - Use spin_lock_irqsave() in interruptible context on guc submission (Krzysztof) - Fixes on DDI and TRANS programming (Imre) - Make sure all planes in use by the joiner have their crtc included (Ville) - Fix 128b/132b modeset issues (Imre) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Z7dgcUG_hvityvHn@intel.com
2025-02-20Merge tag 'nvme-6.14-2025-02-20' of git://git.infradead.org/nvme into block-6.14Jens Axboe
Pull NVMe fixes from Keith: "nvme fixes for Linux 6.14 - FC controller state check fixes (Daniel) - PCI Endpoint fixes (Damien) - TCP connection failure fixe (Caleb) - TCP handling C2HTermReq PDU (Maurizio) - RDMA queue state check (Ruozhu) - Apple controller fixes (Hector) - Target crash on disbaled namespace (Hannes)" * tag 'nvme-6.14-2025-02-20' of git://git.infradead.org/nvme: nvme: only allow entering LIVE from CONNECTING state nvme-fc: rely on state transitions to handle connectivity loss apple-nvme: Support coprocessors left idle apple-nvme: Release power domains when probe fails nvmet: Use enum definitions instead of hardcoded values nvme: Cleanup the definition of the controller config register fields nvme/ioctl: add missing space in err message nvme-tcp: fix connect failure on receiving partial ICResp PDU nvme: tcp: Fix compilation warning with W=1 nvmet: pci-epf: Avoid RCU stalls under heavy workload nvmet: pci-epf: Do not uselessly write the CSTS register nvmet: pci-epf: Correctly initialize CSTS when enabling the controller nvmet-rdma: recheck queue state is LIVE in state lock in recv done nvmet: Fix crash when a namespace is disabled nvme-tcp: add basic support for the C2HTermReq PDU nvme-pci: quirk Acer FA100 for non-uniqueue identifiers
generated by cgit (git 2.34.1) at 2025-09-11 14:08:34 +0000