summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-09-17drm/amdgpu: add VCN 3.0 AV1 registersAlex Deucher
This adds the AV1 registers. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-17drm/amdgpu: add the GC 10.3 VRS registersAlex Deucher
Add the VRS registers. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-17drm/amdgpu: prevent double kfree ttm->sgPhilip Yang
Set ttm->sg to NULL after kfree, to avoid memory corruption backtrace: [ 420.932812] kernel BUG at /build/linux-do9eLF/linux-4.15.0/mm/slub.c:295! [ 420.934182] invalid opcode: 0000 [#1] SMP NOPTI [ 420.935445] Modules linked in: xt_conntrack ipt_MASQUERADE [ 420.951332] Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 1.5.4 07/09/2020 [ 420.952887] RIP: 0010:__slab_free+0x180/0x2d0 [ 420.954419] RSP: 0018:ffffbe426291fa60 EFLAGS: 00010246 [ 420.955963] RAX: ffff9e29263e9c30 RBX: ffff9e29263e9c30 RCX: 000000018100004b [ 420.957512] RDX: ffff9e29263e9c30 RSI: fffff3d33e98fa40 RDI: ffff9e297e407a80 [ 420.959055] RBP: ffffbe426291fb00 R08: 0000000000000001 R09: ffffffffc0d39ade [ 420.960587] R10: ffffbe426291fb20 R11: ffff9e49ffdd4000 R12: ffff9e297e407a80 [ 420.962105] R13: fffff3d33e98fa40 R14: ffff9e29263e9c30 R15: ffff9e2954464fd8 [ 420.963611] FS: 00007fa2ea097780(0000) GS:ffff9e297e840000(0000) knlGS:0000000000000000 [ 420.965144] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 420.966663] CR2: 00007f16bfffefb8 CR3: 0000001ff0c62000 CR4: 0000000000340ee0 [ 420.968193] Call Trace: [ 420.969703] ? __page_cache_release+0x3c/0x220 [ 420.971294] ? amdgpu_ttm_tt_unpopulate+0x5e/0x80 [amdgpu] [ 420.972789] kfree+0x168/0x180 [ 420.974353] ? amdgpu_ttm_tt_set_user_pages+0x64/0xc0 [amdgpu] [ 420.975850] ? kfree+0x168/0x180 [ 420.977403] amdgpu_ttm_tt_unpopulate+0x5e/0x80 [amdgpu] [ 420.978888] ttm_tt_unpopulate.part.10+0x53/0x60 [amdttm] [ 420.980357] ttm_tt_destroy.part.11+0x4f/0x60 [amdttm] [ 420.981814] ttm_tt_destroy+0x13/0x20 [amdttm] [ 420.983273] ttm_bo_cleanup_memtype_use+0x36/0x80 [amdttm] [ 420.984725] ttm_bo_release+0x1c9/0x360 [amdttm] [ 420.986167] amdttm_bo_put+0x24/0x30 [amdttm] [ 420.987663] amdgpu_bo_unref+0x1e/0x30 [amdgpu] [ 420.989165] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x9ca/0xb10 [amdgpu] [ 420.990666] kfd_ioctl_alloc_memory_of_gpu+0xef/0x2c0 [amdgpu] Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-17nfp: use correct define to return NONE fecJakub Kicinski
struct ethtool_fecparam carries bitmasks not bit numbers. We want to return 1 (NONE), not 0. Fixes: 0d0870938337 ("nfp: implement ethtool FEC mode settings") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17Merge tag 'drm-fixes-2020-09-18' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "A bunch of small fixes, some of the i915 ones have been out for a while and got better commit msg explaining some better reasoning behind them (hopefully this trend continues). Otherwise there a few AMD related ones mostly small, one radeon PLL regression fix and a bunch of small mediatek fixes. amdgpu: - Sienna Cichlid fixes - Navy Flounder fixes - DC fixes amdkfd: - Fix a GPU reset crash - Fix a memory leak radeon: - Revert a PLL fix that broke other boards i915: - Avoid exposing a partially constructed context - Use RCU instead of mutex for context termination list iteration - Avoid data race reported by KCSAN - Filter wake_flags passed to default_wake_function mediatek: - Fix scrolling of panel - Remove duplicated include - Use CPU when fail to get cmdq event - Add missing put_device() call" * tag 'drm-fixes-2020-09-18' of git://anongit.freedesktop.org/drm/drm: (21 commits) drm/amd/display: Don't log hdcp module warnings in dmesg drm/amdgpu: declare ta firmware for navy_flounder drm/mediatek: Add missing put_device() call in mtk_hdmi_dt_parse_pdata() drm/mediatek: Add missing put_device() call in mtk_drm_kms_init() drm/mediatek: Add exception handing in mtk_drm_probe() if component init fail drm/mediatek: Add missing put_device() call in mtk_ddp_comp_init() drm/mediatek: Use CPU when fail to get cmdq event drm/mediatek: Remove duplicated include drm/i915: Filter wake_flags passed to default_wake_function drm/i915: Be wary of data races when reading the active execlists drm/i915/gem: Reduce context termination list iteration guard to RCU drm/i915/gem: Delay tracking the GEM context until it is registered drm/amdgpu/dc: Require primary plane to be enabled whenever the CRTC is drm/radeon: revert "Prefer lower feedback dividers" drm/amdgpu: Include sienna_cichlid in USBC PD FW support. drm/amd/display: update nv1x stutter latencies drm/amd/display: Don't use DRM_ERROR() for DTM add topology drm/amd/pm: support runtime pptable update for sienna_cichlid etc. drm/amdkfd: fix a memory leak issue drm/kfd: fix a system crash issue during GPU recovery ...
2020-09-17hinic: fix potential resource leakWei Li
In rx_request_irq(), it will just return what irq_set_affinity_hint() returns. If it is failed, the napi and irq requested are not freed properly. So add exits for failures to handle these. Signed-off-by: Wei Li <liwei391@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: phy: Do not warn in phy_stop() on PHY_DOWNFlorian Fainelli
When phy_is_started() was added to catch incorrect PHY states, phy_stop() would not be qualified against PHY_DOWN. It is possible to reach that state when the PHY driver has been unbound and the network device is then brought down. Fixes: 2b3e88ea6528 ("net: phy: improve phy state checking") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: phy: Avoid NPD upon phy_detach() when driver is unboundFlorian Fainelli
If we have unbound the PHY driver prior to calling phy_detach() (often via phy_disconnect()) then we can cause a NULL pointer de-reference accessing the driver owner member. The steps to reproduce are: echo unimac-mdio-0:01 > /sys/class/net/eth0/phydev/driver/unbind ip link set eth0 down Fixes: cafe8df8b9bc ("net: phy: Fix lack of reference count on PHY driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17drivers/net/wan/hdlc: Set skb->protocol before transmittingXie He
This patch sets skb->protocol before transmitting frames on the HDLC device, so that a user listening on the HDLC device with an AF_PACKET socket will see outgoing frames' sll_protocol field correctly set and consistent with that of incoming frames. 1. Control frames in hdlc_cisco and hdlc_ppp When these drivers send control frames, skb->protocol is not set. This value should be set to htons(ETH_P_HDLC), because when receiving control frames, their skb->protocol is set to htons(ETH_P_HDLC). When receiving, hdlc_type_trans in hdlc.h is called, which then calls cisco_type_trans or ppp_type_trans. The skb->protocol of control frames is set to htons(ETH_P_HDLC) so that the control frames can be received by hdlc_rcv in hdlc.c, which calls cisco_rx or ppp_rx to process the control frames. 2. hdlc_fr When this driver sends control frames, skb->protocol is set to internal values used in this driver. When this driver sends data frames (from upper stacked PVC devices), skb->protocol is the same as that of the user data packet being sent on the upper PVC device (for normal PVC devices), or is htons(ETH_P_802_3) (for Ethernet-emulating PVC devices). However, skb->protocol for both control frames and data frames should be set to htons(ETH_P_HDLC), because when receiving, all frames received on the HDLC device will have their skb->protocol set to htons(ETH_P_HDLC). When receiving, hdlc_type_trans in hdlc.h is called, and because this driver doesn't provide a type_trans function in struct hdlc_proto, all frames will have their skb->protocol set to htons(ETH_P_HDLC). The frames are then received by hdlc_rcv in hdlc.c, which calls fr_rx to process the frames (control frames are consumed and data frames are re-received on upper PVC devices). Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17drivers/net/wan/lapbether: Make skb->protocol consistent with the headerXie He
This driver is a virtual driver stacked on top of Ethernet interfaces. When this driver transmits data on the Ethernet device, the skb->protocol setting is inconsistent with the Ethernet header prepended to the skb. This causes a user listening on the Ethernet interface with an AF_PACKET socket, to see different sll_protocol values for incoming and outgoing frames, because incoming frames would have this value set by parsing the Ethernet header. This patch changes the skb->protocol value for outgoing Ethernet frames, making it consistent with the Ethernet header prepended. This makes a user listening on the Ethernet device with an AF_PACKET socket, to see the same sll_protocol value for incoming and outgoing frames. Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17cxgb4: fix memory leak during module unloadRaju Rangoju
Fix the memory leak in mps during module unload path by freeing mps reference entries if the list adpter->mps_ref is not already empty Fixes: 28b3870578ef ("cxgb4: Re-work the logic for mps refcounting") Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17hv_netvsc: Add validation for untrusted Hyper-V valuesAndres Beltran
For additional robustness in the face of Hyper-V errors or malicious behavior, validate all values that originate from packets that Hyper-V has sent to the guest in the host-to-guest ring buffer. Ensure that invalid values cannot cause indexing off the end of an array, or subvert an existing validation via integer overflow. Ensure that outgoing packets do not have any leftover guest memory that has not been zeroed out. Signed-off-by: Andres Beltran <lkmlabelt@gmail.com> Co-developed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18Merge tag 'mediatek-drm-fixes-5.9' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes Mediatek DRM Fixes for Linux 5.9 1. Fix scrolling of panel 2. Remove duplicated include 3. Use CPU when fail to get cmdq event 4. Add missing put_device() call Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200916231724.30571-1-chunkuang.hu@kernel.org
2020-09-18Merge tag 'drm-intel-fixes-2020-09-17' of ↵Dave Airlie
ssh://git.freedesktop.org/git/drm/drm-intel into drm-fixes drm/i915 fixes for v5.9-rc6: - Avoid exposing a partially constructed context - Use RCU instead of mutex for context termination list iteration - Avoid data race reported by KCSAN - Filter wake_flags passed to default_wake_function Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87y2l8vlj3.fsf@intel.com
2020-09-18Merge tag 'amd-drm-fixes-5.9-2020-09-17' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.9-2020-09-17: amdgpu: - Sienna Cichlid fixes - Navy Flounder fixes - DC fixes amdkfd: - Fix a GPU reset crash - Fix a memory leak radeon: - Revert a PLL fix that broke other boards Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200917043818.3717-1-alexander.deucher@amd.com
2020-09-17i2c: core: Call i2c_acpi_install_space_handler() before ↵Hans de Goede
i2c_acpi_register_devices() Some ACPI i2c-devices _STA method (which is used to detect if the device is present) use autodetection code which probes which device is present over i2c. This requires the I2C ACPI OpRegion handler to be registered before we enumerate i2c-clients under the i2c-adapter. This fixes the i2c touchpad on the Lenovo ThinkBook 14-IIL and ThinkBook 15 IIL not getting an i2c-client instantiated and thus not working. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1842039 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-17Merge series "spi: Fixes for FSI-attached controller" from Eddie James ↵Mark Brown
<eajames@linux.ibm.com>: This series implements a number of fixes for the FSI-attached SPI controller driver. Changes since v1: - Switch to a new compatible string for the restricted version of the SPI controller, rather than a new boolean parameter. Brad Bishop (3): spi: fsi: Handle 9 to 15 byte transfers lengths spi: fsi: Fix clock running too fast spi: fsi: Fix use of the bneq+ sequencer instruction Eddie James (3): dt-bindings: fsi: fsi2spi: Add compatible string for restricted version spi: fsi: Implement restricted size for certain controllers spi: fsi: Check mux status before transfers .../devicetree/bindings/fsi/ibm,fsi2spi.yaml | 1 + drivers/spi/spi-fsi.c | 139 ++++++++++++++---- 2 files changed, 109 insertions(+), 31 deletions(-) -- 2.26.2
2020-09-17spi: dw-pci: free previously allocated IRQs if desc->setup() failsJay Fang
Free previously allocated IRQs when return an error code of desc->setup() which is not always successful. And simplify the code by adding a goto label. Fixes: 8f5c285f3ef5 ("SPI: designware: pci: Switch over to MSI interrupts") CC: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1600132969-53037-1-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17spi: spi-nxp-fspi: Add ACPI supportkuldip dwivedi
Currently NXP fspi driver has support of DT only. Adding ACPI support to the driver so that it can be used by UEFI firmware booting in ACPI mode. This driver will be probed if any firmware will expose HID "NXP0009" in DSDT table. Signed-off-by: kuldip dwivedi <kuldip.dwivedi@puresoftware.com> Reviewed-by: Ashish Kumar <Ashish.Kumar@nxp.com> Link: https://lore.kernel.org/r/20200911130331.6313-1-kuldip.dwivedi@puresoftware.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17spi: lantiq: remove redundant irqsave and irqrestore in hardIRQBarry Song
Running in hardIRQ, disabling irq is redundant. Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Link: https://lore.kernel.org/r/20200916101042.21860-1-song.bao.hua@hisilicon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17spi: xilinx: Fix info message during probeRicardo Ribalda
The info message was showing the mapped address of the device. To avoid security problems, all virtual addresses are converted to __ptrval__, so the message was useless/ugly: [ 2.304949] xilinx_spi b0010000.spi-flash: at 0xB0010000 mapped to 0x(____ptrval____), irq=37 Use %pR instead: [ 15.021354] xilinx_spi b0010000.spi-flash: at [mem 0xb0010000-0xb001ffff], irq=37 Signed-off-by: Ricardo Ribalda <ribalda@kernel.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20200915112936.320647-1-ribalda@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17spi: fsi: Check mux status before transfersEddie James
The SPI controllers are not accessible if the mux isn't set. Therefore, check the mux status before starting a transfer and fail out if it isn't set. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200909222857.28653-7-eajames@linux.ibm.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17spi: fsi: Implement restricted size for certain controllersEddie James
Some of the FSI-attached SPI controllers cannot use the loop command in programming the sequencer due to security requirements. Check the devicetree compatibility that indicates this condition and restrict the size for these controllers. Also, add more transfers directly in the sequence up to the length of the sequence register. Fixes: bbb6b2f9865b ("spi: Add FSI-attached SPI controller driver") Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200909222857.28653-6-eajames@linux.ibm.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17spi: fsi: Fix use of the bneq+ sequencer instructionBrad Bishop
All of the switches in N2_count_control in the counter configuration are required to make the branch if not equal and increment command work. Set them when using bneq+. A side effect of this mode requires a dummy write to TDR when both transmitting and receiving otherwise the controller won't start shifting receive data. It is likely not possible to avoid TDR underrun errors in this mode and they are harmless, so do not check for them. Fixes: bbb6b2f9865b ("spi: Add FSI-attached SPI controller driver") Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200909222857.28653-4-eajames@linux.ibm.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17spi: fsi: Fix clock running too fastBrad Bishop
Use a clock divider tuned to a 200MHz FSI bus frequency (the maximum). Use of the previous divider at 200MHz results in corrupt data from endpoint devices. Ideally the clock divider would be calculated from the FSI clock, but that would require some significant work on the FSI driver. With FSI frequencies slower than 200MHz, the SPI clock will simply run slower, but safely. Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200909222857.28653-3-eajames@linux.ibm.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17spi: fsi: Handle 9 to 15 byte transfers lengthsBrad Bishop
The trailing <len> - 8 bytes of transfer data in this size range is no longer ignored. Fixes: bbb6b2f9865b ("spi: Add FSI-attached SPI controller driver") Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200909222857.28653-2-eajames@linux.ibm.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17x86/mmu: Allocate/free a PASIDFenghua Yu
A PASID is allocated for an "mm" the first time any thread binds to an SVA-capable device and is freed from the "mm" when the SVA is unbound by the last thread. It's possible for the "mm" to have different PASID values in different binding/unbinding SVA cycles. The mm's PASID (non-zero for valid PASID or 0 for invalid PASID) is propagated to a per-thread PASID MSR for all threads within the mm through IPI, context switch, or inherited. This is done to ensure that a running thread has the right PASID in the MSR matching the mm's PASID. [ bp: s/SVM/SVA/g; massage. ] Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/1600187413-163670-10-git-send-email-fenghua.yu@intel.com
2020-09-17regmap: debugfs: Fix handling of name string for debugfs init delaysCharles Keepax
In regmap_debugfs_init the initialisation of the debugfs is delayed if the root node isn't ready yet. Most callers of regmap_debugfs_init pass the name from the regmap_config, which is considered temporary ie. may be unallocated after the regmap_init call returns. This leads to a potential use after free, where config->name has been freed by the time it is used in regmap_debugfs_initcall. This situation can be seen on Zynq, where the architecture init_irq callback registers a syscon device, using a local variable for the regmap_config. As init_irq is very early in the platform bring up the regmap debugfs root isn't ready yet. Although this doesn't crash it does result in the debugfs entry not having the correct name. Regmap already sets map->name from config->name on the regmap_init path and the fact that a separate field is used to pass the name to regmap_debugfs_init appears to be an artifact of the debugfs name being added before the map name. As such this patch updates regmap_debugfs_init to use map->name, which is already duplicated from the config avoiding the issue. This does however leave two lose ends, both regmap_attach_dev and regmap_reinit_cache can be called after a regmap is registered and would have had the effect of applying a new name to the debugfs entries. In both of these cases it was chosen to update the map name. In the case of regmap_attach_dev there are 3 users that currently use this function to update the name, thus doing so avoids changes for those users and it seems reasonable that attaching a device would want to set the name of the map. In the case of regmap_reinit_cache the primary use-case appears to be devices that need some register access to identify the device (for example devices in the same family) and then update the cache to match the exact hardware. Whilst no users do currently update the name here, given the use-case it seemed reasonable the name might want to be updated once the device is better identified. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200917120828.12987-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17Merge series "Support ROHM BD9576MUF and BD9573MUF PMICs" from Matti ↵Mark Brown
Vaittinen <matti.vaittinen@fi.rohmeurope.com>: Initial support for ROHM BD9576MUF and BD9573MUF PMICs. These PMICs are primarily intended to be used to power the R-Car family processors. BD9576MUF includes some additional safety features the BD9573MUF does not have. This initial version of drivers does not utilize these features and for now the SW behaviour is identical. Please note that this version of drivers is only tested on BD9576MUF but according to the data-sheets the relevant parts of registers should be same so drivers should also work on BD9573MUF. This patch series includes MFD, watchdog and regulator drivers with basic functionality such as: - Enabling and pinging the watchdog - configuring watchog timeout / window from device-tree - reading regulator states/voltages - enabling/disabling VOUT1 (VD50) when control mode B is used. This patch series does not bring interrupt support. BD9576MUF and BD9573MUF are designed to keep the IRQ line low for whole duration of error condition. IRQ can't be 'acked'. So proper IRQ support would require some IRQ limiter implementation (delayed unmask?) in order to not hog the CPU. --- Matti Vaittinen (6): dt_bindings: mfd: Add ROHM BD9576MUF and BD9573MUF PMICs dt_bindings: regulator: Add ROHM BD9576MUF and BD9573MUF PMICs mfd: Support ROHM BD9576MUF and BD9573MUF wdt: Support wdt on ROHM BD9576MUF and BD9573MUF regulator: Support ROHM BD9576MUF and BD9573MUF MAINTAINERS: Add ROHM BD9576MUF and BD9573MUF drivers .../bindings/mfd/rohm,bd9576-pmic.yaml | 129 +++++++ .../regulator/rohm,bd9576-regulator.yaml | 33 ++ MAINTAINERS | 4 + drivers/mfd/Kconfig | 11 + drivers/mfd/Makefile | 1 + drivers/mfd/rohm-bd9576.c | 130 +++++++ drivers/regulator/Kconfig | 10 + drivers/regulator/Makefile | 1 + drivers/regulator/bd9576-regulator.c | 337 ++++++++++++++++++ drivers/watchdog/Kconfig | 13 + drivers/watchdog/Makefile | 1 + drivers/watchdog/bd9576_wdt.c | 295 +++++++++++++++ include/linux/mfd/rohm-bd957x.h | 61 ++++ include/linux/mfd/rohm-generic.h | 2 + 14 files changed, 1028 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml create mode 100644 drivers/mfd/rohm-bd9576.c create mode 100644 drivers/regulator/bd9576-regulator.c create mode 100644 drivers/watchdog/bd9576_wdt.c create mode 100644 include/linux/mfd/rohm-bd957x.h base-commit: f4d51dffc6c01a9e94650d95ce0104964f8ae822 -- 2.21.0 -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~ Simon says - in Latin please. ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~ Thanks to Simon Glass for the translation =]
2020-09-17regulator: Support ROHM BD9576MUF and BD9573MUFMatti Vaittinen
Add initial support for ROHM BD9576MUF and BD9573MUF PMICs regulators. These PMICs are mainly used to power the R-Car series processors. The BD9576 includes some functional-safety features which are not present on BD9573. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/78baea1d7922506827ca717e277e4e6b391bbb78.1600329307.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17iommu/vt-d: Change flags type to unsigned int in binding mmFenghua Yu
"flags" passed to intel_svm_bind_mm() is a bit mask and should be defined as "unsigned int" instead of "int". Change its type to "unsigned int". Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lkml.kernel.org/r/1600187413-163670-3-git-send-email-fenghua.yu@intel.com
2020-09-17drm, iommu: Change type of pasid to u32Fenghua Yu
PASID is defined as a few different types in iommu including "int", "u32", and "unsigned int". To be consistent and to match with uapi definitions, define PASID and its variations (e.g. max PASID) as "u32". "u32" is also shorter and a little more explicit than "unsigned int". No PASID type change in uapi although it defines PASID as __u64 in some places. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lkml.kernel.org/r/1600187413-163670-2-git-send-email-fenghua.yu@intel.com
2020-09-17regmap: Add support for 12/20 register formattingRicardo Ribalda
Devices such as the AD5628 require 32 bits of data divided in 12 bits for dummy, command and address, and 20 for data and dummy. Eg: XXXXCCCCAAAADDDDDDDDDDDDDDDDXXXX Where X is dont care, C is command, A is address and D is data bits. Which would requierd the following regmap_config: static const struct regmap_config config_dac = { .reg_bits = 12, .val_bits = 20, .max_register = 0xff, }; Signed-off-by: Ricardo Ribalda <ribalda@kernel.org> Link: https://lore.kernel.org/r/20200917114727.1120373-1-ribalda@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17usblp: fix race between disconnect() and read()Oliver Neukum
read() needs to check whether the device has been disconnected before it tries to talk to the device. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+be5b5f86a162a6c281e6@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200917103427.15740-1-oneukum@suse.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17Merge remote-tracking branch 'origin/irq/gic-retrigger' into irq/irqchip-nextMarc Zyngier
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17Merge remote-tracking branch 'origin/irq/ipi-as-irq' into irq/irqchip-nextMarc Zyngier
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17Merge remote-tracking branch 'origin/irq/gic-v3-nmi-ns' into irq/irqchip-nextMarc Zyngier
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17Merge remote-tracking branch 'origin/irq/dev_err_probe' into irq/irqchip-nextMarc Zyngier
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17Merge remote-tracking branch 'origin/irq/misc-5.10' into irq/irqchip-nextMarc Zyngier
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/gic: Cleanup Franken-GIC handlingMarc Zyngier
Introduce a static key identifying Samsung's unique creation, allowing to replace the indirect call to compute the base addresses with a simple test on the static key. Faster, cheaper, negative diffstat. Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/bcm2836: Provide mask/unmask dummy methods for IPIsMarc Zyngier
Although it doesn't seem possible to disable individual mailbox interrupts, we still need to provide some callbacks. Fixes: 09eb672ce4fb ("irqchip/bcm2836: Configure mailbox interrupts as standard interrupts") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/armada-370-xp: Configure IPIs as standard interruptsMarc Zyngier
To introduce IPIs as standard interrupts to the Armada 370-XP driver, let's allocate a completely separate irqdomain and irqchip combo that lives parallel to the "standard" one. This effectively should be modelled as a chained interrupt controller, but the code is in such a state that it is pretty hard to shoehorn, as it would require the rewrite of the MSI layer as well. Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/hip04: Configure IPIs as standard interruptsMarc Zyngier
In order to switch the hip04 driver to provide standard interrupts for IPIs, rework the way interrupts are allocated, making sure the irqdomain covers the SGIs as well as the rest of the interrupt range. The driver is otherwise so old-school that it creates all interrupts upfront (duh!), so there is hardly anything else to change, apart from communicating the IPIs to the arch code. Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/bcm2836: Configure mailbox interrupts as standard interruptsMarc Zyngier
In order to switch the bcm2836 driver to privide standard interrupts for IPIs, it first needs to stop lying about the way things work. The mailbox interrupt is actually a multiplexer, with enough bits to store 32 pending interrupts per CPU. So let's turn it into a chained irqchip. Once this is done, we can instanciate the corresponding IPIs, and pass them to the architecture code. Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/gic-common: Don't enable SGIs by defaultMarc Zyngier
The architecture code now enables the IPIs as required, so no need to enable SGIs by default in the GIC code. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/gic: Configure SGIs as standard interruptsMarc Zyngier
Change the way we deal with GIC SGIs by turning them into proper IRQs, and calling into the arch code to register the interrupt range instead of a callback. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/gic: Refactor SMP configurationMarc Zyngier
As we are about to change quite a lot of the SMP support code, let's start by moving it around so that it minimizes the amount of #ifdefery. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/gic-v3: Configure SGIs as standard interruptsMarc Zyngier
Change the way we deal with GICv3 SGIs by turning them into proper IRQs, and calling into the arch code to register the interrupt range instead of a callback. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/irq-pruss-intc: Add support for ICSSG INTC on K3 SoCsSuman Anna
The K3 AM65x and J721E SoCs have the next generation of the PRU-ICSS IP, commonly called ICSSG. The PRUSS INTC present within the ICSSG supports more System Events (160 vs 64), more Interrupt Channels and Host Interrupts (20 vs 10) compared to the previous generation PRUSS INTC instances. The first 2 and the last 10 of these host interrupt lines are used by the PRU and other auxiliary cores and sub-modules within the ICSSG, with 8 host interrupts connected to MPU. The host interrupts 5, 6, 7 are also connected to the other ICSSG instances within the SoC and can be partitioned as per system integration through the board dts files. Enhance the PRUSS INTC driver to add support for this ICSSG INTC instance. Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/irq-pruss-intc: Implement irq_{get, set}_irqchip_state opsDavid Lechner
This implements the irq_get_irqchip_state and irq_set_irqchip_state callbacks for the TI PRUSS INTC driver. The set callback can be used by drivers to "kick" a PRU by injecting a PRU system event. Co-developed-by: Suman Anna <s-anna@ti.com> Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Reviewed-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-21 11:15:22 +0000