Age | Commit message (Collapse) | Author |
|
It appears that almost traditionally the N variants have deviations
in the register offsets in comparison to S one. This is the case
for Intel Alder Lake as well. Fix register offsets for ADL-N variant.
Fixes: 114b610b9048 ("pinctrl: alderlake: Add Intel Alder Lake-N pin controller support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Commit 3e25f800afb8 ("memory: fsl_ifc: populate child devices without
relying on simple-bus") was trying to replace the "simple-bus"
compatible with explicit bus populate in the driver. But
of_platform_populate() only populates child nodes of ifc without
populating child buses and child mfd devices residing under ifc. Change
it to of_platform_default_populate() to fix the problem.
Fixes: 3e25f800afb8 ("memory: fsl_ifc: populate child devices without relying on simple-bus")
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20220307204118.19093-1-leoyang.li@nxp.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
CONFIG_SATA_LPM_MOBILE_POLICY was renamed to CONFIG_SATA_LPM_POLICY in
commit 4dd4d3deb502 ("ata: ahci: Rename CONFIG_SATA_LPM_MOBILE_POLICY
configuration item").
This can potentially cause problems as users would invisibly lose
configuration policy defaults when they built the new kernel. To
avoid such problems, switch back to the old name (even if it's wrong).
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
There is often not a MAC address available in an EEPROM accessible by
Linux with Marvell devices. Instead the bootload has the MAC address
and directly programs it into the hardware. So don't consider an error
from of_get_mac_address() has fatal. However, the check was added for
the case where there is a MAC address in an the EEPROM, but the EEPROM
has not probed yet, and -EPROBE_DEFER is returned. In that case the
error should be returned. So make the check specific to this error
code.
Cc: Mauri Sandberg <maukka@ext.kapsi.fi>
Reported-by: Thomas Walther <walther-it@gmx.de>
Fixes: 42404d8f1c01 ("net: mv643xx_eth: process retval from of_get_mac_address")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220405000404.3374734-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KS8851 selects MICREL_PHY, which depends on PTP_1588_CLOCK_OPTIONAL, so
make KS8851 also depend on PTP_1588_CLOCK_OPTIONAL.
Fixes kconfig warning and build errors:
WARNING: unmet direct dependencies detected for MICREL_PHY
Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m]
Selected by [y]:
- KS8851 [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICREL [=y] && SPI [=y]
ld.lld: error: undefined symbol: ptp_clock_register referenced by micrel.c
net/phy/micrel.o:(lan8814_probe) in archive drivers/built-in.a
ld.lld: error: undefined symbol: ptp_clock_index referenced by micrel.c
net/phy/micrel.o:(lan8814_ts_info) in archive drivers/built-in.a
Reported-by: kernel test robot <lkp@intel.com>
Fixes: ece19502834d ("net: phy: micrel: 1588 support for LAN8814 phy")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220405065936.4105272-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The imx-mipi-csis driver (VIDEO_IMX_MIPI_CSIS) lost its dependency on
VIDEO_DEV in commit 63fe3d27b226 ("media: platform/*/Kconfig: make
manufacturer menus more uniform"). This causes build failures with
configurations that don't have VIDEO_DEV set. Fix it by restoring the
dependency.
Link: https://lore.kernel.org/linux-media/20220331123151.1953-1-laurent.pinchart@ideasonboard.com
Fixes: 63fe3d27b226 ("media: platform/*/Kconfig: make manufacturer menus more uniform")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Replace the last instance of acpi_bus_get_device(), added recently
by commit 87e59b36e5e2 ("spi: Support selection of the index of the
ACPI Spi Resource before alloc"), with acpi_fetch_acpi_dev() and
finally drop acpi_bus_get_device() that has no more users.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
|
|
Pull virtio fixes from Michael Tsirkin:
"Fixes and cleanups:
- A couple of mlx5 fixes related to cvq
- A couple of reverts dropping useless code (code that used it got
reverted earlier)"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa: mlx5: synchronize driver status with CVQ
vdpa: mlx5: prevent cvq work from hogging CPU
Revert "virtio_config: introduce a new .enable_cbs method"
Revert "virtio: use virtio_device_ready() in virtio_device_restore()"
|
|
Currently when XDP rings are created, each descriptor gets its DD bit
set, which turns out to be the wrong approach as it can lead to a
situation where more descriptors get cleaned than it was supposed to,
e.g. when AF_XDP busy poll is run with a large batch size. In this
situation, the driver would request for more buffers than it is able to
handle.
Fix this by not setting the DD bits in ice_xdp_alloc_setup_rings(). They
should be initialized to zero instead.
Fixes: 9610bd988df9 ("ice: optimize XDP_TX workloads")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Shwetha Nagaraju <shwetha.nagaraju@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ICE_DOWN is dedicated for pf->state. Check for ICE_VSI_DOWN being set on
vsi->state in ice_xsk_wakeup().
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Shwetha Nagaraju <shwetha.nagaraju@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Unfortunately, the ice driver doesn't respect the RCU critical section that
XSK wakeup is surrounded with. To fix this, add synchronize_rcu() calls to
paths that destroy resources that might be in use.
This was addressed in other AF_XDP ZC enabled drivers, for reference see
for example commit b3873a5be757 ("net/i40e: Fix concurrency issues
between config flow and XSK")
Fixes: efc2214b6047 ("ice: Add support for XDP")
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Shwetha Nagaraju <shwetha.nagaraju@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
At the moment the GIC IRQ domain translation routine happily converts
ACPI table GSI numbers below 16 to GIC SGIs (Software Generated
Interrupts aka IPIs). On the Devicetree side we explicitly forbid this
translation, actually the function will never return HWIRQs below 16 when
using a DT based domain translation.
We expect SGIs to be handled in the first part of the function, and any
further occurrence should be treated as a firmware bug, so add a check
and print to report this explicitly and avoid lengthy debug sessions.
Fixes: 64b499d8df40 ("irqchip/gic-v3: Configure SGIs as standard interrupts")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220404110842.2882446-1-andre.przywara@arm.com
|
|
It turns out that our polling of RWP is totally wrong when checking
for it in the redistributors, as we test the *distributor* bit index,
whereas it is a different bit number in the RDs... Oopsie boo.
This is embarassing. Not only because it is wrong, but also because
it took *8 years* to notice the blunder...
Just fix the damn thing.
Fixes: 021f653791ad ("irqchip: gic-v3: Initial support for GICv3")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20220315165034.794482-2-maz@kernel.org
|
|
The way KVM drives GICv4.{0,1} is as follows:
- vcpu_load() makes the VPE resident, instructing the RD to start
scanning for interrupts
- just before entering the guest, we check that the RD has finished
scanning and that we can start running the vcpu
- on preemption, we deschedule the VPE by making it invalid on
the RD
However, we are preemptible between the first two steps. If it so
happens *and* that the RD was still scanning, we nonetheless write
to the GICR_VPENDBASER register while Dirty is set, and bad things
happen (we're in UNPRED land).
This affects both the 4.0 and 4.1 implementations.
Make sure Dirty is cleared before performing the deschedule,
meaning that its_clear_vpend_valid() becomes a sort of full VPE
residency barrier.
Reported-by: Jingyi Wang <wangjingyi11@huawei.com>
Tested-by: Nianyao Tang <tangnianyao@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: 57e3cebd022f ("KVM: arm64: Delay the polling of the GICR_VPENDBASER.Dirty bit")
Link: https://lore.kernel.org/r/4aae10ba-b39a-5f84-754b-69c2eb0a2c03@huawei.com
|
|
If devm_platform_ioremap_resource() fails, it never returns
NULL, replace NULL check with IS_ERR().
Fixes: a6199bb514d8 ("irqchip: Add Qualcomm MPM controller driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220316025100.1758413-1-yangyingliang@huawei.com
|
|
If MAILBOX is n, building fails:
drivers/irqchip/irq-qcom-mpm.o: In function `mpm_pd_power_off':
irq-qcom-mpm.c:(.text+0x174): undefined reference to `mbox_send_message'
irq-qcom-mpm.c:(.text+0x174): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `mbox_send_message'
Make QCOM_MPM depends on MAILBOX to fix this.
Fixes: a6199bb514d8 ("irqchip: Add Qualcomm MPM controller driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220317131956.30004-1-yuehaibing@huawei.com
|
|
The latest fix for probe error handling contained a typo that causes
probing to fail with the following message:
rockchip-rga: probe of ff680000.rga failed with error -12
This patch fixes the typo.
Fixes: e58430e1d4fd (media: rockchip/rga: fix error handling in probe)
Reviewed-by: Dragan Simic <dragan.simic@gmail.com>
Signed-off-by: Kyle Copperfield <kmcopper@danwin1210.me>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
In 6f98a4bfee72 ("random: block in /dev/urandom"), we tried to make a
successful try_to_generate_entropy() call *required* if the RNG was not
already initialized. Unfortunately, weird architectures and old
userspaces combined in TCG test harnesses, making that change still not
realistic, so it was reverted in 0313bc278dac ("Revert "random: block in
/dev/urandom"").
However, rather than making a successful try_to_generate_entropy() call
*required*, we can instead make it *best-effort*.
If try_to_generate_entropy() fails, it fails, and nothing changes from
the current behavior. If it succeeds, then /dev/urandom becomes safe to
use for free. This way, we don't risk the regression potential that led
to us reverting the required-try_to_generate_entropy() call before.
Practically speaking, this means that at least on x86, /dev/urandom
becomes safe. Probably other architectures with working cycle counters
will also become safe. And architectures with slow or broken cycle
counters at least won't be affected at all by this change.
So it may not be the glorious "all things are unified!" change we were
hoping for initially, but practically speaking, it makes a positive
impact.
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Disable check for queue being enabled in ice_vc_dis_qs_msg, because
there could be a case when queues were created, but were not enabled.
We still need to delete those queues.
Normal workflow for VF looks like:
Enable path:
VIRTCHNL_OP_ADD_ETH_ADDR (opcode 10)
VIRTCHNL_OP_CONFIG_VSI_QUEUES (opcode 6)
VIRTCHNL_OP_ENABLE_QUEUES (opcode 8)
Disable path:
VIRTCHNL_OP_DISABLE_QUEUES (opcode 9)
VIRTCHNL_OP_DEL_ETH_ADDR (opcode 11)
The issue appears only in stress conditions when VF is enabled and
disabled very fast.
Eventually there will be a case, when queues are created by
VIRTCHNL_OP_CONFIG_VSI_QUEUES, but are not enabled by
VIRTCHNL_OP_ENABLE_QUEUES.
In turn, these queues are not deleted by VIRTCHNL_OP_DISABLE_QUEUES,
because there is a check whether queues are enabled in
ice_vc_dis_qs_msg.
When we bring up the VF again, we will see the "Failed to set LAN Tx queue
context" error during VIRTCHNL_OP_CONFIG_VSI_QUEUES step. This
happens because old 16 queues were not deleted and VF requests to create
16 more, but ice_sched_get_free_qparent in ice_ena_vsi_txq would fail to
find a parent node for first newly requested queue (because all nodes
are allocated to 16 old queues).
Testing Hints:
Just enable and disable VF fast enough, so it would be disabled before
reaching VIRTCHNL_OP_ENABLE_QUEUES.
while true; do
ip link set dev ens785f0v0 up
sleep 0.065 # adjust delay value for you machine
ip link set dev ens785f0v0 down
done
Fixes: 77ca27c41705 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap")
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When VF is freshly created, but not brought up, ring->txq_teid
value is by default set to 0.
But 0 is a valid TEID. On some platforms the Root Node of
Tx scheduler has a TEID = 0. This can cause issues as shown below.
The proper way is to set ring->txq_teid to ICE_INVAL_TEID (0xFFFFFFFF).
Testing Hints:
echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs
ip link set dev ens785f0v0 up
ip link set dev ens785f0v0 down
If we have freshly created VF and quickly turn it on and off, so there
would be no time to reach VIRTCHNL_OP_CONFIG_VSI_QUEUES stage, then
VIRTCHNL_OP_DISABLE_QUEUES stage will fail with error:
[ 639.531454] disable queue 89 failed 14
[ 639.532233] Failed to disable LAN Tx queues, error: ICE_ERR_AQ_ERROR
[ 639.533107] ice 0000:02:00.0: Failed to stop Tx ring 0 on VSI 5
The reason for the fail is that we are trying to send AQ command to
delete queue 89, which has never been created and receive an "invalid
argument" error from firmware.
As this queue has never been created, it's teid and ring->txq_teid
have default value 0.
ice_dis_vsi_txq has a check against non-existent queues:
node = ice_sched_find_node_by_teid(pi->root, q_teids[i]);
if (!node)
continue;
But on some platforms the Root Node of Tx scheduler has a teid = 0.
Hence, ice_sched_find_node_by_teid finds a node with teid = 0 (it is
pi->root), and we go further to submit an erroneous request to firmware.
Fixes: 37bb83901286 ("ice: Move common functions out of ice_main.c part 7/7")
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This node pointer is returned by of_find_compatible_node() with
refcount incremented. Calling of_node_put() to aovid the refcount leak.
Fixes: d346c9e86d86 ("dpaa2-ptp: reuse ptp_qoriq driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220404125336.13427-1-linmq006@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There were a few patches left in drm-misc-next-fixes, let's bring them
into drm-misc-fixes.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Let's start the 5.18 fixes cycle.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
The error handling code of optee_ffa_probe misses the mutex_destroy of
ffa.mutex when mutext_init succeeds.
Fix this by adding mutex_destory of ffa.mutex at the error handling part
Fixes: aceeafefff73 ("optee: use driver internal tee_context for some rpc")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Fixes a crash booting on those platforms with nouveau.
Fixes: 4cdd2450bf73 ("drm/nouveau/pmu/gm200-: use alternate falcon reset sequence")
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.17+
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322124800.2605463-1-kherbst@redhat.com
|
|
The sparse checker complains about converting pointers between address
spaces. We correctly stored an __iomem pointer in struct scmi_optee_channel,
but discarded the __iomem when returning it from get_channel_shm, causing one
warning. Then we passed the non-__iomem pointer return from get_channel_shm
at two other places, where an __iomem pointer is expected, causing couple of
other warnings
Add the appropriate __iomem annotations at all places where it is missing.
optee.c:414:20: warning: incorrect type in return expression (different address spaces)
optee.c:414:20: expected struct scmi_shared_mem *
optee.c:414:20: got struct scmi_shared_mem [noderef] __iomem *shmem
optee.c:426:26: warning: incorrect type in argument 1 (different address spaces)
optee.c:426:26: expected struct scmi_shared_mem [noderef] __iomem *shmem
optee.c:426:26: got struct scmi_shared_mem *shmem
optee.c:441:30: warning: incorrect type in argument 1 (different address spaces)
optee.c:441:30: expected struct scmi_shared_mem [noderef] __iomem *shmem
optee.c:441:30: got struct scmi_shared_mem *shmem
Link: https://lore.kernel.org/r/20220404102419.1159705-1-sudeep.holla@arm.com
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Cc: Cristian Marussi <cristian.marussi@arm.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://lore.kernel.org/r/20220401075537.2407376-1-lv.ruyi@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
During SCMI Clock protocol initialization, after having retrieved from the
SCMI platform all the available discrete rates for a specific clock, the
clock rates array is sorted, unfortunately using a pointer to its end as
a base instead of its start, so that sorting does not work.
Fix invocation of sort() passing as base a pointer to the start of the
retrieved clock rates array.
Link: https://lore.kernel.org/r/20220318092813.49283-1-cristian.marussi@arm.com
Fixes: dccec73de91d ("firmware: arm_scmi: Keep the discrete clock rates sorted")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Revert commit 87ebbb8c612b ("ACPI: processor: idle: Only flush cache
on entering C3") that broke the assumptions of the acpi_idle_play_dead()
callers.
Namely, the CPU cache must always be flushed in acpi_idle_play_dead(),
regardless of the target C-state that is going to be requested, because
this is likely to be part of a CPU offline procedure or preparation for
entering a system-wide sleep state and the lack of synchronization
between the CPU cache and RAM may lead to problems going forward, for
example when the CPU is brought back online.
In particular, it breaks resume from suspend-to-RAM on Lenovo ThinkPad
C13 which fails occasionally until the problematic commit is reverted.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The documentation of the function rvt_error_qp says both r_lock and s_lock
need to be held when calling that function. It also asserts using lockdep
that both of those locks are held. However, the commit I referenced in
Fixes accidentally makes the call to rvt_error_qp in rvt_ruc_loopback no
longer covered by r_lock. This results in the lockdep assertion failing
and also possibly in a race condition.
Fixes: d757c60eca9b ("IB/rdmavt: Fix concurrency panics in QP post_send and modify to error")
Link: https://lore.kernel.org/r/20220228165330.41546-1-dossche.niels@gmail.com
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
add_hwgenerator_randomness() tries to only use the required amount of input
for fast init, but credits all the entropy, rather than a fraction of
it. Since it's hard to determine how much entropy is left over out of a
non-unformly random sample, either give it all to fast init or credit
it, but don't attempt to do both. In the process, we can clean up the
injection code to no longer need to return a value.
Signed-off-by: Jan Varho <jan.varho@gmail.com>
[Jason: expanded commit message]
Fixes: 73c7733f122e ("random: do not throw away excess input to crng_fast_load")
Cc: stable@vger.kernel.org # 5.17+, requires af704c856e88
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
This reverts commit 743b9065fe6348a5f8f5ce04869ce2d701e5e1bc.
The original commit breaks the 256 bitmap in blockack frames in AP
mode. After reverting the commit the feature works again in both AP and
mesh modes
Tested-on: IPQ8074 hw2.0 PCI WLAN.HK.2.6.0.1-00786-QCAHKSWPL_SILICONZ-1
Fixes: 743b9065fe63 ("ath11k: mesh: add support for 256 bitmap in blockack frames in 11ax")
Signed-off-by: Anilkumar Kolli <quic_akolli@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1648701477-16367-1-git-send-email-quic_akolli@quicinc.com
|
|
struct fsd_pin_ctrl is not used outside of the file, so it can be made
static. This fixes sparse warning:
drivers/pinctrl/samsung/pinctrl-exynos-arm64.c:773:31: sparse:
symbol 'fsd_pin_ctrl' was not declared. Should it be static?
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 0d1b662c374c ("pinctrl: samsung: add FSD SoC specific data")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220331194526.52444-1-krzysztof.kozlowski@linaro.org
|
|
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: 87108dc78eb8 ("memory: atmel-ebi: Enable the SMC clock if specified")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220309110144.22412-1-linmq006@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Make sure to free the flash platform device in the event that
registration fails during probe.
Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver")
Cc: stable@vger.kernel.org # 5.8
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20220303180632.3194-1-johan@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
allmodconfig builds on 32-bit architectures fail with the following error.
drivers/misc/habanalabs/common/memory.c: In function 'alloc_device_memory':
drivers/misc/habanalabs/common/memory.c:153:49: error:
cast from pointer to integer of different size
Fix the typecast. While at it, drop other unnecessary typecasts associated
with the same commit.
Fixes: e8458e20e0a3c ("habanalabs: make sure device mem alloc is page aligned")
Cc: Ohad Sharabi <osharabi@habana.ai>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220404134859.3278599-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In __nat25_add_pppoe_tag(), the tag length is read from the tag data
structure. The value is kept in network format, but read as raw value.
With -Warray-bounds, this results in the following gcc error/warning
when building the driver on alpha.
In function '__nat25_add_pppoe_tag',
inlined from 'nat25_db_handle' at
drivers/staging/r8188eu/core/rtw_br_ext.c:479:11:
arch/alpha/include/asm/string.h:22:16: error:
'__builtin_memcpy' forming offset [40, 2051] is out of the bounds
[0, 40] of object 'tag_buf' with type 'unsigned char[40]'
Add the missing be16_to_cpu() to fix the compile error. It should be
noted, however, that this fix means that the code did probably not work
on any little endian systems and/or that the driver has other endiannes
related issues. A build with C=1 suggests that this is indeed the case.
This patch does not attempt to fix any of those other issues.
Fixes: 15865124feed ("staging: r8188eu: introduce new core dir for RTL8188eu driver")
Cc: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220404134338.3276991-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit b1f66033cd4e ("platform/x86: amd-pmc: Move to later in the
suspend process") amd-pmc doesn't use traditional suspend resume
callback anymore but relies on functions only created declared when
CONFIG_SUSPEND is set.
Check for CONFIG_SUSPEND and only use those functions in those
circumstances.
Fixes: commit b1f66033cd4e ("platform/x86: amd-pmc: Move to later in the suspend process")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220402231122.3877-1-mario.limonciello@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
CROSSHAIR VI HERO motherboard is incorrectly named as
ROG CROSSHAIR VI HERO.
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
Link: https://lore.kernel.org/r/20220403193455.1363-1-pauk.denis@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
CONFIG_SENSORS_XDPE122_REGULATOR is disabled
0-day reports:
drivers/hwmon/pmbus/xdpe12284.c:127:36: warning:
unused variable 'xdpe122_reg_desc'
This is seen if CONFIG_SENSORS_XDPE122_REGULATOR is not enabled.
Mark xdpe122_reg_desc as __maybe_unused to fix the problem.
Fixes: f53bfe4d6984 ("hwmon: (xdpe12284) Add regulator support")
Reported-by: kernel test robot <lkp@intel.com>
Cc: Marcello Sylvester Bauer <sylv@sylv.io>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Since there is already a generic function strstarts() that check if a
string starts with a given prefix, cleanup str_starts_with().
Signed-off-by: Wei Li <liwei391@huawei.com>
Acked-by: Peter Kästle <peter@piie.net>
Link: https://lore.kernel.org/r/20220326020249.3266561-1-liwei391@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Clean up the following includecheck warning:
drivers/platform/x86/barco-p50-gpio.c: linux/io.h is included more than once.
No functional change.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Acked-by: Peter Korsgaard <peter.korsgaard@barco.com>
Link: https://lore.kernel.org/r/1648021825-6182-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
negative
Eliminate the follow smatch warnings:
drivers/platform/x86/samsung-laptop.c:1124 kbd_led_set() warn: unsigned
'value' is never less than zero.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220322061830.105579-1-jiapeng.chong@linux.alibaba.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
On the passive side when the disconnectReq event comes, if the current
state is MRA_REP_RCVD, it needs to cancel the MAD before entering the
DREQ_RCVD and TIMEWAIT states, otherwise the destroy_id may block until
this mad will reach timeout.
Fixes: a977049dacde ("[PATCH] IB: Add the kernel CM implementation")
Link: https://lore.kernel.org/r/75261c00c1d82128b1d981af9ff46e994186e621.1649062436.git.leonro@nvidia.com
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Update cache->last_add when returning an MR to the cache so that the cache
work won't remove it.
Fixes: b9358bdbc713 ("RDMA/mlx5: Fix locking in MR cache work queue")
Link: https://lore.kernel.org/r/c99f076fce4b44829d434936bbcd3b5fc4c95020.1649062436.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Don't remove MRs from the cache if need to delay the removal.
Fixes: b9358bdbc713 ("RDMA/mlx5: Fix locking in MR cache work queue")
Link: https://lore.kernel.org/r/c3087a90ff362c8796c7eaa2715128743ce36722.1649062436.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Complete some clean-ups as reqested from the last review as follow-ups
- Remove certificate from structure as no need to store it any more
- Clean up return code handling
- Moved freeing of signature to before admin object released (issue
seen in testing when unloading module)
- Minor code flow improvements
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220321180624.4761-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
GPIO chip irq members are exposed before they could be completely
initialized and this leads to race conditions.
One such issue was observed for the gc->irq.domain variable which
was accessed through the I2C interface in gpiochip_to_irq() before
it could be initialized by gpiochip_add_irqchip(). This resulted in
Kernel NULL pointer dereference.
Following are the logs for reference :-
kernel: Call Trace:
kernel: gpiod_to_irq+0x53/0x70
kernel: acpi_dev_gpio_irq_get_by+0x113/0x1f0
kernel: i2c_acpi_get_irq+0xc0/0xd0
kernel: i2c_device_probe+0x28a/0x2a0
kernel: really_probe+0xf2/0x460
kernel: RIP: 0010:gpiochip_to_irq+0x47/0xc0
To avoid such scenarios, restrict usage of GPIO chip irq members before
they are completely initialized.
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
When the page_ring is not used page_ptr_mask is 0.
Do not dereference page_ring[0] in this case.
Fixes: 2768935a4660 ("sfc: reuse pages to avoid DMA mapping/unmapping costs")
Reported-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Smatch reports this issue
dwmac-loongson.c:208:19: warning: symbol
'loongson_dwmac_driver' was not declared.
Should it be static?
loongson_dwmac_driver is only used in dwmac-loongson.c.
File scope variables used only in one file should
be static. Change loongson_dwmac_driver's
storage-class-specifier from global to static.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|