summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-10-04mfd: tps65217: Add power button as subdeviceMarcin Niestroj
Add tps65217 power buttor subdevice with assigned IRQ resources. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: tps65217: Add support for IRQsMarcin Niestroj
Add support for handling IRQs: power button, AC and USB power state changes. Mask and interrupt bits are shared within one register, which prevents us to use regmap_irq implementation. New irq_domain is created in order to add interrupt handling for each tps65217's subsystem. IRQ resources have been added for charger subsystem to be able to notify about AC and USB state changes. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: sm501: Constify gpio_chip structuresJulia Lawall
These structures are only used to copy into other structures, so declare them as const. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct gpio_chip i@p = { ... }; @ok@ identifier r.i; expression e; position p; @@ e = i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct gpio_chip e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct gpio_chip i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: ucb1x00: Remove NO_IRQ checkArnd Bergmann
probe_irq_off() returns '0' on failure, not NO_IRQ, so the check in this driver is clearly wrong. This replaces it with the regular '!irq' check used in other drivers. The sa1100 platform that this driver is used on originally numbered all its interrupts starting at '0', which would have conflicted with this change, but as of commit 18f3aec ("ARM: 8230/1: sa1100: shift IRQs by one"), this is not a problem any more. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: twl6040: The chip does not support bulk accessPeter Ujfalusi
Bulk access is not working with twl6040, we need to use single register access. Bulk access would happen when we try to sync the regcache after power on. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: arizona: Use suspend_noirq inplace of suspend_lateCharles Keepax
As runtime PM doesn't function whilst processing system suspend/resume operations and the Arizona IRQ handlers need runtime PM to function we must disable IRQs during these operations. Whilst this is already done in the driver we are using suspend/suspend_late and resume/resume_noirq to do so which has two problems. Firstly, as suspend_late is before suspend_noirq that means we still have a small window where an IRQ can cause issues. Secondly, if another suspend_late handler fails after ours has run then (as resume_noirq will not run) we will make unbalanced calls to enable_irq. This is all simply fixed by using the suspend_noirq callback rather than suspend_late. Whilst we are doing this tidy the code up a little, and use the appropriate helper macros. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: act8945a: Add .of_compatible for act8945a-chargerWenyou Yang
To regard the act8945a-charger as a sub-device, add .of_compatible for act8945a-charger cell. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: arizona: Add sensible return value to some error pathsCharles Keepax
There are some cases in arizona_dev_init, such as where we don't recognise the chip ID, in which we head to the error path without setting a sensible error code in ret. This would lead to the chip silently failing probe, as it would still return 0. Fix this up by adding appropriate sets of the return value. Whilst adding these update the existing paths that do return an error when the chip is not recognised to use ENODEV, which seems like a better fit. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: Add Samsung Exynos Low Power Audio Subsystem driverSylwester Nawrocki
This patch adds common driver for the Top block of the Samsung Exynos SoC Low Power Audio Subsystem. This is a minimal driver which prepares resources for IP blocks like I2S, audio DMA and UART and exposes a regmap for the Top block registers. Also system power ops are added to ensure the Audio Subsystem is operational after system suspend/resume cycle. Signed-off-by: Inha Song <ideal.song@samsung.com> Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: da9053: Ensure the FAULT_LOG is cleared during MFD driver probeSteve Twiss
The function da9052_clear_fault_log() is added to mitigate the case of persistent data being transferred between reboots. Clearance of any the persistent information within the DA9053 FAULT_LOG register must be completed during start-up so the fault-log does not continue with previous values. A clearance function has been added here in the kernel driver because wiping the fault-log cannot be counted on outside the Linux kernel. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: Adam Thomson <adam.thomson.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: dm355evm_msp: Refactoring for add_child()Markus Elfring
Adjust jump targets according to the Linux coding style convention. Another check for the variable "status" can be omitted then at the end. Link: https://lkml.kernel.org/g/<20160628163146.GG29166@dell> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: rtsx_usb: Avoid setting ucr->current_sg.statusLu Baolu
Member "status" of struct usb_sg_request is managed by usb core. A spin lock is used to serialize the change of it. The driver could check the value of req->status, but should avoid changing it without the hold of the spinlock. Otherwise, it could cause race or error in usb core. This patch could be backported to stable kernels with version later than v3.14. Cc: stable@vger.kernel.org # 3.14+ Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Roger Tseng <rogerable@realtek.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: ucb1x00: Allow IRQ probing to work with IRQs > 32Russell King
probe_irq_on() only returns non-zero if it found any interrupts below IRQ32 which could be probe candidates. If all the probable interrupts are higher than 32, then this will cause a failure. Fix this. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: qcom_rpm: Handle message RAM clockLinus Walleij
The MSM8660, APQ8060, IPQ806x and MSM8960 have a GCC clock to the message RAM used by the RPM. This needs to be enabled for messages to pass through. This is a crude solution that simply prepare/enable at probe() and disable/unprepare at remove(). More elaborate PM is probably possible to add later. The construction uses IS_ERR() to gracefully handle the platforms that do not provide a message RAM clock. It will bail out of probe only if the clock is hitting a probe deferral situation. Of course this requires the proper device tree set-up: rpm: rpm@104000 { compatible = "qcom,rpm-msm8660"; clocks = <&gcc RPM_MSG_RAM_H_CLK>; clock-names = "ram"; ... }; I have provided this in the MSM8660 device tree, and will provide patches for the other targets. Cc: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: max14577: Change Krzysztof Kozlowski's email to kernel.orgKrzysztof Kozlowski
Change my email address to kernel.org instead of Samsung one for the purpose of any future contact. The copyrights remain untouched and are attributed to Samsung. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: intel_soc_pmic_bxtwc: Add bxt_wcove_usbc deviceBin Gao
The Intel Whiskey Cove PMIC includes several function units, e.g. ADC, thermal, USB Type-C, GPIO, etc. The corresponding device has to be created in the mfd driver(intel_soc_pmic_bxtwc.c). This change adds the USB Type-c device. Signed-off-by: Bin Gao <bin.gao@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: lpss: Add Intel Kaby Lake PCH-H PCI IDsMika Westerberg
Intel Kaby Lake PCH-H has the same LPSS than Intel Sunrisepoint. Add the new IDs to the list of supported devices. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: altera-a10sr: Make altr_a10sr_regmap_config static constAxel Lin
It's only used in this driver and never get modified, make it static const. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: wm8350-i2c: Make sure the i2c regmap functions are compiledUwe Kleine-König
This fixes a compile failure: drivers/built-in.o: In function `wm8350_i2c_probe': core.c:(.text+0x828b0): undefined reference to `__devm_regmap_init_i2c' Makefile:953: recipe for target 'vmlinux' failed Fixes: 52b461b86a9f ("mfd: Add regmap cache support for wm8350") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: da9063: Update author information to remove incorrect e-mail addressesSteve Twiss
Remove incorrect e-mail addresses from the copyright header and MODULE_AUTHOR() macro. These e-mail addresses are no longer in use. The author names have not been changed, only the e-mail addresses have been deleted from the source files. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: axp20x: Add AXP209 GPIO supportMaxime Ripard
Now that we have a GPIO driver for the AXP209, we can add it to our MFD. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: qcom_rpm: Add missing of_node_put after calling of_parse_phandlePeter Chen
of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Signed-off-by: Peter Chen <peter.chen@nxp.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04Merge branches 'ib-mfd-gpio-4.9', 'ib-mfd-gpio-regulator-4.9', ↵Lee Jones
'ib-mfd-input-4.9', 'ib-mfd-regulator-4.9', 'ib-mfd-regulator-4.9.1', 'ib-mfd-regulator-rtc-4.9', 'ib-mfd-regulator-rtc-4.9-1' and 'ib-mfd-rtc-4.9' into ibs-for-mfd-merged
2016-10-04mfd: arizona: Add gating of external MCLKn clocksSylwester Nawrocki
This patch adds requesting of the clocks supplied on MCLK1, MCLK2 pins, gating of the 32k clock is added to the arizona_clk32k_enable(), arizona_clk32k_disable() helpers. It's a temporary change until the CODEC's clock controller gets exposed through the clk API and is helpful for board configurations where the MCLK clocks are not provided by always on oscillators. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04cpuidle: cpuidle-cps: Enable use with MIPSr6 CPUs.Matt Redfearn
This patch enables the MIPS CPS driver for MIPSr6 CPUs. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: linux-mips@linux-mips.org Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14228/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04WATCHDOG: txx9wdt: Add missing clock (un)prepare calls for CCFGeert Uytterhoeven
While the custom minimal TXx9 clock implementation doesn't need or use clock (un)prepare calls (they are dummies if !CONFIG_HAVE_CLK_PREPARE), they are mandatory when using the Common Clock Framework. Hence add them, to prepare for the advent of CCF. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-watchdog@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14238/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04fsl/fman: remove leftover commentMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
2016-10-04fsl/fman: fix return value checkingMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
2016-10-04fsl/fman: simplify redundant conditionMadalin Bucur
Change suggested by David Binderman, thanks. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
2016-10-04fsl/fman: check of_get_phy_mode() return valueMadalin Bucur
For unknown compatibles avoid crashing and default to SGMII. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
2016-10-04fsl/fman: check pcsphy pointer before useMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
2016-10-04fsl/fman: MEMAC may use QSGMII PHY interface modeMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
2016-10-04fsl/fman: return a phy_dev pointer from initMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
2016-10-04fsl/fman: simplify device tree readsMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
2016-10-04fsl/fman: use of_get_phy_mode()Madalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
2016-10-04fsl/fman: small fixesMadalin Bucur
Make module params static, proper NULL checks, remove __iomem label when misused. Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
2016-10-04fsl/fman: fix loadable module compilationIgal Liberman
Signed-off-by: Igal Liberman <igal.liberman@freescale.com>
2016-10-04fsl/fman: split lines over 80 charactersMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
2016-10-04drm/rockchip: analogix_dp: Refuse to enable PSR if panel doesn't support itTomeu Vizoso
There's no point in enabling PSR when the panel doesn't support it. This also avoids a problem when PSR gets enabled when a CRTC is being disabled, because sometimes in that situation the DSP_HOLD_VALID_INTR interrupt on which we wait will never arrive. This was observed on RK3288 with a panel without PSR (veyron-jaq Chromebook). It's very easy to reproduce by running the kms_rmfb test in IGT a few times. Cc: Yakir Yang <ykk@rock-chips.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1474639600-30090-2-git-send-email-tomeu.vizoso@collabora.com
2016-10-04drm/bridge: analogix_dp: Add analogix_dp_psr_supportedTomeu Vizoso
So users know whether PSR should be enabled or not. Cc: Yakir Yang <ykk@rock-chips.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1474639600-30090-1-git-send-email-tomeu.vizoso@collabora.com
2016-10-04drm: Document caveats around atomic event handlingDaniel Vetter
It's not that obvious how a driver can all race the atomic commit with handling the completion event. And there's unfortunately a pile of drivers with rather bad event handling which misdirect people into the wrong direction. Try to remedy this by documenting everything better. v2: Type fixes Alex spotted. v3: More typos Alex spotted. Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Alex Deucher <alexdeucher@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1475229896-6047-1-git-send-email-daniel.vetter@ffwll.ch
2016-10-04drm: Simplify drm_printk to reduce object size quite a bitJoe Perches
Remove function name and special " *ERROR*" from argument list $ size drivers/gpu/drm/built-in.o* (x86-32 defconfig, most drm selected) text data bss dec hex filename 5635366 182579 14328 5832273 58fe51 drivers/gpu/drm/built-in.o.new 5779552 182579 14328 5976459 5b318b drivers/gpu/drm/built-in.o.old Using "%ps", __builtin_return_address(0) is the same as "%s", __func__ except for static inlines, but it's more or less the same output. Miscellanea: o Convert args... to ##__VA_ARGS__ o The equivalent DRM_DEV_<FOO> macros are rarely used and not worth conversion Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/01f976d5ab93c985756fc1b2e83656fb0a2a28c8.1474856262.git.joe@perches.com
2016-10-04drm/i915: Account for sink max TMDS clock when checking the port clockVille Syrjälä
It's perfectly legal for the sink to support 12bpc only for some lower resolution modes, while the higher resolution modes can only be used with 8bpc. So let's take the sink's max TMDS clock into account before we go and decide that a particular mode can be used with 12bpc. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-11-git-send-email-ville.syrjala@linux.intel.com
2016-10-04drm/i915: Replace a bunch of connector->base.display_info with a local variableVille Syrjälä
Reduce the eyesore with a local variable. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-10-git-send-email-ville.syrjala@linux.intel.com
2016-10-04drm/edid: Move dvi_dual/max_tmds_clock parsing out from drm_edid_to_eld()Ville Syrjälä
drm_edid_to_eld() is just mean to cook up the ELD for the audio driver, so having it parse non-audio related stuff seems just wrong, and potentially could lead to that information not being even filled out if the function doesn't even get called. Let's move that stuff to the place where we parse the color formats and whatnot from the CEA ext block. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-9-git-send-email-ville.syrjala@linux.intel.com
2016-10-04drm/edid: Clear the old cea_rev when there's no CEA extension in the new EDIDVille Syrjälä
It's not a good idea to leave stale cea_rev in the drm_display_info. The current EDID might not even have a CEA ext block in which case we'd end up leaving the stale value in place. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-8-git-send-email-ville.syrjala@linux.intel.com
2016-10-04drm/edid: Reduce the number of times we parse the CEA extension blockVille Syrjälä
Instead of parsing parts of the CEA extension block in two places to determine supported color formats and whatnot, let's just consolidate it to one function. This also makes it possible to neatly flatten drm_assign_hdmi_deep_color_info(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-7-git-send-email-ville.syrjala@linux.intel.com
2016-10-04drm/edid: Don't pass around drm_display_info needlesslyVille Syrjälä
We already pass the connector to drm_add_display_info() and drm_assign_hdmi_deep_color_info(), so passing the connector->display_info also is pointless. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-6-git-send-email-ville.syrjala@linux.intel.com
2016-10-04drm/edid: Move dvi_dual/max_tmds_clock to drm_display_infoVille Syrjälä
We have the drm_display_info for storing information about the sink, so let's move dvi_dual and max_tmds_clock in there. v2: Deal with superfluous code shuffling Document dvi_dual and max_tmds_clock too Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> (v1) Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-5-git-send-email-ville.syrjala@linux.intel.com
2016-10-04drm/edid: Make max_tmds_clock kHz instead of MHzVille Syrjälä
We generally store clocks in kHz, so let's do that for the HDMI max TMDS clock value as well. Less surpising. v2: Deal with superfluous code shuffling Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> (v1) Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-4-git-send-email-ville.syrjala@linux.intel.com
generated by cgit (git 2.34.1) at 2025-09-13 10:50:34 +0000