summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-06-27drm/radeon/kms: add dpm support for trinity asicsAlex Deucher
This adds dpm support for trinity asics. This includes: - clockgating - powergating - dynamic engine clock scaling - dynamic voltage scaling set radeon.dpm=1 to enable it. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: add dpm support for sumo asics (v2)Alex Deucher
This adds dpm support for sumo asics. This includes: - clockgating - powergating - dynamic engine clock scaling - dynamic voltage scaling set radeon.dpm=1 to enable it. v2: fix indention Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2013-06-27drm/radeon/kms: add dpm support for btc (v3)Alex Deucher
This adds dpm support for btc asics. This includes: - clockgating - dynamic engine clock scaling - dynamic memory clock scaling - dynamic voltage scaling - dynamic pcie gen1/gen2 switching (requires additional acpi support) Set radeon.dpm=1 to enable. v2: reduce stack usage v3: attempt to fix state enable Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: add dpm support for evergreen (v4)Alex Deucher
This adds dpm support for evergreen asics. This includes: - clockgating - dynamic engine clock scaling - dynamic memory clock scaling - dynamic voltage scaling - dynamic pcie gen1/gen2 switching (requires additional acpi support) Set radeon.dpm=1 to enable. v2: reduce stack usage, rename ulv struct v3: fix thermal interrupt check notices by Jerome v4: fix state enable Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: add dpm support for rv7xx (v4)Alex Deucher
This adds dpm support for rv7xx asics. This includes: - clockgating - dynamic engine clock scaling - dynamic memory clock scaling - dynamic voltage scaling - dynamic pcie gen1/gen2 switching Set radeon.dpm=1 to enable. v2: reduce stack usage v3: fix 64 bit div v4: fix state enable Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-28drm/qxl: add support for cursor hotspot.Dave Airlie
This uses the cursor hotspot info from userspace and passes it to the qxl hw layer. Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm: add hotspot support for cursors.Dave Airlie
So it looks like for virtual hw cursors on QXL we need to inform the "hw" device what the cursor hotspot parameters are. This makes sense if you think the host has to draw the cursor and interpret clicks from it. However the current modesetting interface doesn't support passing the hotspot information from userspace. This implements a new cursor ioctl, that takes the hotspot info as well, userspace can try calling the new interface and if it gets -ENOSYS it means its on an older kernel and can just fallback. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/tilcdc: Clear bits of register we're going to set.Pantelis Antoniou
Bits weren't cleared so resolution changes didn't work. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Darren Etheridge <detheridge@ti.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/tilcdc fixing i2c/slave initialization raceDarren Etheridge
In certain senarios drm will initialize before i2c this means that i2c slave devices like the nxp tda998x will fail to be probed. This patch detects this condition then defers the probe of the slave device and the tilcdc main driver. Signed-off-by: Darren Etheridge <detheridge@ti.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/tilcdc: whitespace fixes and tidyupDarren Etheridge
keeping checkpatch happy. Signed-off-by: Darren Etheridge <detheridge@ti.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/tilcdc: adding more guards to prevent selection of invalid modesDarren Etheridge
The tilcdc has a number of limitations for the allowed sizes of the various adjustable timing parameter. Some modes are outside of these timings. This commit will prune modes that report timings that will overflow the allowed sizes in the tilcdc. Signed-off-by: Darren Etheridge <detheridge@ti.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/tilcdc: fixing off by one errors found on analyzerDarren Etheridge
When hooking up to an HDMI analyzer noticed some timings were off by one. Referring to the hardware technical reference manual for the lcd controller some of the timing registers use 0 to represent 1. This patch addresses that issue. Signed-off-by: Darren Etheridge <detheridge@ti.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/tilcdc: adding some more devicetree configDarren Etheridge
Adding support for max-pixelclock and max-width device tree entries. As some devices that use the tilcdc hardware module have restrictions on the allowed/tested values. Also update DT bindings document to reflect new parameters. Signed-off-by: Darren Etheridge <detheridge@ti.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/tilcdc: support pixel widths greater than 1024Darren Etheridge
TI LCD controller version 2 has an extended eleventh bit that enables horizontal resolutions greater than 1024 pixels to be specified (upto 2048). This patch adds support for setting this bit on LCDC V2. Signed-off-by: Darren Etheridge <detheridge@ti.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28tpm/tpm_i2c_infineon: Remove unused header filePeter Huewe
This driver does not use any module parameters anymore, so the inclusion of the header file can be removed. Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2013-06-28tpm: tpm_i2c_infinion: Don't modify i2c_client->driverLars-Peter Clausen
The I2C client driver is not supposed to modify the client's driver pointer, this is handled by the I2C core. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2013-06-28drm/mgag200: Added resolution and bandwidth limits for various G200e products.Julia Lemire
At the larger resolutions, the g200e series sometimes struggles with maintaining a proper output. Problems like flickering or black bands appearing on screen can occur. In order to avoid this, limitations regarding resolutions and bandwidth have been added for the different variations of the g200e series. This code was ported from the old xorg mga driver. Signed-off-by: Julia Lemire <jlemire@matrox.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28char/agp: replace numeric with standard PM state macrosYijing Wang
Use standard PM state macros PCI_Dx instead of numeric 0/1/2.. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-27cpufreq: don't leave stale policy pointer in cdbs->cur_policyJacob Shin
Clear ->cur_policy when stopping a governor, or the ->cur_policy pointer may be stale on systems with have_governor_per_policy when a new policy is allocated due to CPU hotplug offline/online. [rjw: Changelog] Suggested-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Jacob Shin <jacob.shin@amd.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-27Merge branch 'pm-fixes' into pm-cpufreqRafael J. Wysocki
A subsequent commit depends on the 'pm-fixes' commits.
2013-06-27acpi-cpufreq: Add new sysfs attribute freqdomain_cpusLan Tianyu
Commits fcf8058 (cpufreq: Simplify cpufreq_add_dev()) and aa77a52 (cpufreq: acpi-cpufreq: Don't set policy->related_cpus from .init()) changed the contents of the "related_cpus" sysfs attribute on systems where acpi-cpufreq is used and user space can't get the list of CPUs which are in the same hardware coordination CPU domain (provided by the ACPI AML method _PSD) via "related_cpus" any more. To make up for that loss add a new sysfs attribute "freqdomian_cpus" for the acpi-cpufreq driver which exposes the list of CPUs in the same domain regardless of whether it is coordinated by hardware or software. [rjw: Changelog, documentation] References: https://bugzilla.kernel.org/show_bug.cgi?id=58761 Reported-by: Jean-Philippe Halimi <jean-philippe.halimi@exascale-computing.eu> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-27cpufreq: make sure frequency transitions are serializedViresh Kumar
Whenever we are changing frequency of a cpu, we are calling PRECHANGE and POSTCHANGE notifiers. They must be serialized. i.e. PRECHANGE or POSTCHANGE shouldn't be called twice contiguously. This can happen due to bugs in users of __cpufreq_driver_target() or actual cpufreq drivers who are sending these notifiers. This patch adds some protection against this. Now, we keep track of the last transaction and see if something went wrong. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-27Merge branch 'pm-cpufreq-arm' into pm-cpufreqRafael J. Wysocki
* pm-cpufreq-arm: cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: s3c2416: fix forgotten driver_data conversions
2013-06-27Merge branch 'pm-cpufreq-assorted' into pm-cpufreqRafael J. Wysocki
* pm-cpufreq-assorted: (21 commits) cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: e_powersaver: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: ACPI: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: make __cpufreq_notify_transition() static cpufreq: Fix minor formatting issues cpufreq: Fix governor start/stop race condition cpufreq: Simplify userspace governor cpufreq: powerpc: move cpufreq driver to drivers/cpufreq cpufreq: kirkwood: Select CPU_FREQ_TABLE option cpufreq: big.LITTLE needs cpufreq table cpufreq: SPEAr needs cpufreq table cpufreq: powerpc: Add cpufreq driver for Freescale e500mc SoCs cpufreq: remove unnecessary cpufreq_cpu_{get|put}() calls cpufreq: MAINTAINERS: Add git tree path for ARM specific updates cpufreq: rename index as driver_data in cpufreq_frequency_table cpufreq: Don't create empty /sys/devices/system/cpu/cpufreq directory cpufreq: Move get_cpu_idle_time() to cpufreq.c cpufreq: governors: Move get_governor_parent_kobj() to cpufreq.c cpufreq: Add EXPORT_SYMBOL_GPL for have_governor_per_policy ...
2013-06-27Merge branch 'pm-cpufreq-Kconfig' into pm-cpufreqRafael J. Wysocki
* pm-cpufreq-Kconfig: cpufreq: X86_AMD_FREQ_SENSITIVITY: select CPU_FREQ_TABLE cpufreq: tegra: create CONFIG_ARM_TEGRA_CPUFREQ cpufreq: S3C2416/S3C64XX: select CPU_FREQ_TABLE cpufreq: pxa: select CPU_FREQ_TABLE cpufreq: powerpc: CBE_RAS: select CPU_FREQ_TABLE cpufreq: imx: select CPU_FREQ_TABLE cpufreq: highbank: remove select CPU_FREQ_TABLE cpufreq: exynos: select CPU_FREQ_TABLE cpufreq: davinci: select CPU_FREQ_TABLE cpufreq: cris: select CPU_FREQ_TABLE cpufreq: blackfin: enable driver for CONFIG_BFIN_CPU_FREQ
2013-06-27ACPI: implement acpi_os_get_timer() according the specMika Westerberg
ACPI Timer() opcode should return monotonically increasing clock with 100ns granularity according the ACPI 5.0 spec. Testing the current Timer() implementation with following ASL code (and an additional debug print in acpi_os_sleep() to get the sleep times dumped out to dmesg): // Test: 10ms Store(Timer, Local1) Sleep(10) Divide(Subtract(Timer, Local1), 10000,, Local1) Sleep(Local1) // Test: 200ms Store(Timer, Local1) Sleep(200) Divide(Subtract(Timer, Local1), 10000,, Local1) Sleep(Local1) // Test 1300ms Store(Timer, Local1) Sleep(1300) Divide(Subtract(Timer, Local1), 10000,, Local1) Sleep(Local1) The second sleep value is calculated using Timer(). If the implementation is good enough we should be able to get the second value pretty close to the first. However, the current Timer() gives pretty bad sleep times: [ 11.488100] ACPI: acpi_os_get_timer() TBD [ 11.492150] ACPI: Sleep(10) [ 11.502993] ACPI: Sleep(0) [ 11.506315] ACPI: Sleep(200) [ 11.706237] ACPI: Sleep(0) [ 11.709550] ACPI: Sleep(1300) [ 13.008929] ACPI: Sleep(0) Fix this with the help of ktime_get(). Once the fix is applied and run against the same ASL code we get: [ 11.486786] ACPI: Sleep(10) [ 11.499029] ACPI: Sleep(12) [ 11.512350] ACPI: Sleep(200) [ 11.712282] ACPI: Sleep(200) [ 11.912170] ACPI: Sleep(1300) [ 13.211577] ACPI: Sleep(1300) That is much more closer to the values we expected. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-27ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scanLan Tianyu
HP Folio 13's BIOS defines CMOS RTC Operation Region and the EC's _REG method will access that region. To allow the CMOS RTC region handler to be installed before the EC _REG method is first invoked, add ec_skip_dsdt_scan() as HP Folio 13's callback to ec_dmi_table. References: https://bugzilla.kernel.org/show_bug.cgi?id=54621 Reported-and-tested-by: Stefan Nagy <public@stefan-nagy.at> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Cc: 3.9+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-27ACPI: Add CMOS RTC Operation Region handler supportLan Tianyu
On HP Folio 13-2000, the BIOS defines a CMOS RTC Operation Region and the EC's _REG methord accesses that region. Thus an appropriate address space handler must be registered for that region before the EC driver is loaded. Introduce a mechanism for adding CMOS RTC address space handlers. Register an ACPI scan handler for CMOS RTC devices such that, when a device of that kind is detected during an ACPI namespace scan, a common CMOS RTC operation region address space handler will be installed for it. References: https://bugzilla.kernel.org/show_bug.cgi?id=54621 Reported-and-tested-by: Stefan Nagy <public@stefan-nagy.at> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Cc: 3.9+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-27ath10k: minimally handle new channel width enumeration valuesJohn W. Linville
CC drivers/net/wireless/ath/ath10k/mac.o drivers/net/wireless/ath/ath10k/mac.c: In function ‘chan_to_phymode’: drivers/net/wireless/ath/ath10k/mac.c:229:3: warning: enumeration value ‘NL80211_CHAN_WIDTH_5’ not handled in switch [-Wswitch] drivers/net/wireless/ath/ath10k/mac.c:229:3: warning: enumeration value ‘NL80211_CHAN_WIDTH_10’ not handled in switch [-Wswitch] drivers/net/wireless/ath/ath10k/mac.c:247:3: warning: enumeration value ‘NL80211_CHAN_WIDTH_5’ not handled in switch [-Wswitch] drivers/net/wireless/ath/ath10k/mac.c:247:3: warning: enumeration value ‘NL80211_CHAN_WIDTH_10’ not handled in switch [-Wswitch] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27ath9k_htc: ifdef out IFTYPE_MESH advertisementThomas Pedersen
This is needed so the interface combination can still be validated when CONFIG_MAC80211_MESH is not enabled. Otherwise wiphy registration fails. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27brcmfmac: remove code and comment for older kernel supportArend van Spriel
In the code of the receive path some code was dealing with how things were done in older kernels. Not really needed for an upstream driver. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27brcmfmac: reduce firmware-signalling locking scope in rx pathArend van Spriel
In the receive path a spinlock is taken upon parsing the TLV signal header. This moves to locking to the TLV handling functions where it protects the data structures. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27brcmfmac: cleanup debug messages in brcmf_fws_hdrpush()Arend van Spriel
Trivial cleanup of debug messages. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27brcmfmac: tag packet in the netdev transmit callbackArend van Spriel
Transmit packets needs to be tagged in order to receive a tx status feedback from the firmware. Determine the tag in the netdev transmit callback instead of determining the tag just before transfer to the device. This reduces the number of exception flows and hence makes the driver code simpler. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27brcmfmac: add broken scatter-gather DMA supportFranky Lin
DMA engine of some old SDIO host controllers require block size alignment for data length of each scatterlist item. This patch introduces an intermediate buffer list to support this kind of platform. It decreases the throughput because of an extra memcpy in critical data path. So don't turn this on unless it's necessary. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27brcmfmac: use unified dongle address preparation functionFranky Lin
Introduce a unified dongle backplane address preparation function brcmf_sdio_addrprep to replace duplicate address prep code. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27brcmfmac: remove SDIO_REQ_ASYNC flagFranky Lin
Remove SDIO_REQ_ASYNC from brcmfmac since it is not being used. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27brcmfmac: remove (ab)use of NL80211_NUM_ACSArend van Spriel
Used NL80211_NUM_ACS to indicate the BCMC fifo used in the driver which has the same value now, but it is a bad idea relying on that. Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27brcmfmac: simplify transmit pathArend van Spriel
When getting a transmit packet from the networking layer simply enqueue the packet unconditional and have it handled by the dequeue worker. The transfer of the packet to the bus-specific driver part is now done from one context. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27bcma: add support for BCM43142Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27b43: replace B43_BCMA_EXTRA with modparam allhwsupportRafał Miłecki
This allows enabling support for extra hardware with just a module param, without kernel/module recompilation. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27ath10k: leave MMIC generation to the HWMichal Kazior
Apparently HW doesn't require us to generate MMIC for TKIP suite. Each frame was 8 bytes longer than it should be and some APs would drop frames that exceed 1520 bytes of 802.11 payload. This could be observed during throughput tests or fragmented IP traffic. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27ath10k: fix 5ghz channel definitionsMichal Kazior
Nonsense channel flags were being set. Although it doesn't seem this was visible to the user the patch makes sure that channel availability won't be crippled in the future if ath_common behaviour changes. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27ath10k: fix MSI-X setup failpathMichal Kazior
Irqs were not freed up correctly upon msi-x setup failure. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27rt2x00: rt2800lib: fix default TX power check for RT55xxGabor Juhos
The code writes the default_power2 value into the TX field of the RFCSR50 register, however the condition in the if statement uses default_power1. Due to this, wrong TX power value might be written into the register. Use the correct value in the condition to fix the issue. Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: stable@vger.kernel.org # 3.10 Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27ath9k: Add mix tx gain table for AR9462 2.0Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27rt2x00: rt2800lib: turn on tertiary PAs/LNAs for 3T/3R devicesGabor Juhos
The 3T/3R devices are using the tertiary PAs/LNAs however those are never turned on. Fix the code to turn on those on for such devices. Also modify the code to use switch statements to improve readability. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27rt2x00: rt2800lib: turn on secondary PAs/LNAs for 3T/3R devicesGabor Juhos
The secondary PAs/LNAs are turned on only for 2T/2R devices, however these are used for 3T/3R devices as well. Always turn those on if the device uses more than one tx/rx chains. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27rt2x00: rt2800: increase EEPROM_SIZE to 512 bytesGabor Juhos
Ralink 3T chipsets are using a different EEPROM layout than the others. The EEPROM on these devices contain more data than the others which does not fit into 272 byte which the rt2800 driver actually uses. The Ralink reference driver defines EEPROM_SIZE to 512/1024 bytes for PCI/USB devices respectively. Increase the EEPROM_SIZE constant to 512 bytes, in order to make room for EEPROM data of 3T devices. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27hwmon: (nct6775) Drop unsupported fan alarm attributes for NCT6775Guenter Roeck
NCT6775 does not support alarms for fans 4 and 5. Drop the attributes. cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit (git 2.34.1) at 2025-09-21 20:06:40 +0000