summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-05-06Merge tag 'drm-misc-fixes-2022-05-05' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.18-rc6: - Small fix for hot-unplugging fb devices. - Kconfig fix for it6505. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/69e51773-8c6f-4ff7-9a06-5c2922a43999@linux.intel.com
2022-05-05net: phy: micrel: Pass .probe for KS8737Fabio Estevam
Since commit f1131b9c23fb ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices") the kszphy_suspend/ resume hooks are used. These functions require the probe function to be called so that priv can be allocated. Otherwise, a NULL pointer dereference happens inside kszphy_config_reset(). Cc: stable@vger.kernel.org Fixes: f1131b9c23fb ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices") Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220504143104.1286960-2-festevam@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05net: phy: micrel: Do not use kszphy_suspend/resume for KSZ8061Fabio Estevam
Since commit f1131b9c23fb ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices") the following NULL pointer dereference is observed on a board with KSZ8061: # udhcpc -i eth0 udhcpc: started, v1.35.0 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = f73cef4e [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 196 Comm: ifconfig Not tainted 5.15.37-dirty #94 Hardware name: Freescale i.MX6 SoloX (Device Tree) PC is at kszphy_config_reset+0x10/0x114 LR is at kszphy_resume+0x24/0x64 ... The KSZ8061 phy_driver structure does not have the .probe/..driver_data fields, which means that priv is not allocated. This causes the NULL pointer dereference inside kszphy_config_reset(). Fix the problem by using the generic suspend/resume functions as before. Another alternative would be to provide the .probe and .driver_data information into the structure, but to be on the safe side, let's just restore Ethernet functionality by using the generic suspend/resume. Cc: stable@vger.kernel.org Fixes: f1131b9c23fb ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices") Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220504143104.1286960-1-festevam@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-06Merge tag 'amd-drm-fixes-5.18-2022-05-04' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.18-2022-05-04: amdgpu: - Fix a xen dom0 regression on APUs - Fix a potential array overflow if a receiver were to send an erroneous audio channel count Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220504190439.5723-1-alexander.deucher@amd.com
2022-05-05fsl_lpuart: Don't enable interrupts too earlyIndan Zupancic
If an irq is pending when devm_request_irq() is called, the irq handler will cause a NULL pointer access because initialisation is not done yet. Fixes: 9d7ee0e28da59 ("tty: serial: lpuart: avoid report NULL interrupt") Cc: stable <stable@vger.kernel.org> Signed-off-by: Indan Zupancic <Indan.Zupancic@mep-info.com> Link: https://lore.kernel.org/r/20220505114750.45423-1-Indan.Zupancic@mep-info.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05tty: n_gsm: fix invalid gsmtty_write_room() resultDaniel Starke
gsmtty_write() does not prevent the user to use the full fifo size of 4096 bytes as allocated in gsm_dlci_alloc(). However, gsmtty_write_room() tries to limit the return value by 'TX_SIZE' and returns a negative value if the fifo has more than 'TX_SIZE' bytes stored. This is obviously wrong as 'TX_SIZE' is defined as 512. Define 'TX_SIZE' to the fifo size and use it accordingly for allocation to keep the current behavior. Return the correct remaining size of the fifo in gsmtty_write_room() via kfifo_avail(). Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220504081733.3494-3-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05tty: n_gsm: fix mux activation issues in gsm_config()Daniel Starke
The current implementation activates the mux if it was restarted and opens the control channel if the mux was previously closed and we are now acting as initiator instead of responder, which is the default setting. This has two issues. 1) No mux is activated if we keep all default values and only switch to initiator. The control channel is not allocated but will be opened next which results in a NULL pointer dereference. 2) Switching the configuration after it was once configured while keeping the initiator value the same will not reopen the control channel if it was closed due to parameter incompatibilities. The mux remains dead. Fix 1) by always activating the mux if it is dead after configuration. Fix 2) by always opening the control channel after mux activation. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220504081733.3494-2-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05tty: n_gsm: fix buffer over-read in gsm_dlci_data()Daniel Starke
'len' is decreased after each octet that has its EA bit set to 0, which means that the value is encoded with additional octets. However, the final octet does not decreases 'len' which results in 'len' being one byte too long. A buffer over-read may occur in tty_insert_flip_string() as it tries to read one byte more than the passed content size of 'data'. Decrease 'len' also for the final octet which has the EA bit set to 1 to write the correct number of bytes from the internal receive buffer to the virtual tty. Fixes: 2e124b4a390c ("TTY: switch tty_flip_buffer_push") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220504081733.3494-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: 8250_mtk: Fix register address for XON/XOFF characterAngeloGioacchino Del Regno
The XON1/XOFF1 character registers are at offset 0xa0 and 0xa8 respectively, so we cannot use the definition in serial_port.h. Fixes: bdbd0a7f8f03 ("serial: 8250-mtk: modify baudrate setting") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220427132328.228297-4-angelogioacchino.delregno@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: 8250_mtk: Make sure to select the right FEATURE_SELAngeloGioacchino Del Regno
Set the FEATURE_SEL at probe time to make sure that BIT(0) is enabled: this guarantees that when the port is configured as AP UART, the right register layout is interpreted by the UART IP. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220427132328.228297-3-angelogioacchino.delregno@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: 8250_mtk: Fix UART_EFR register addressAngeloGioacchino Del Regno
On MediaTek SoCs, the UART IP is 16550A compatible, but there are some specific quirks: we are declaring a register shift of 2, but this is only valid for the majority of the registers, as there are some that are out of the standard layout. Specifically, this driver is using definitions from serial_reg.h, where we have a UART_EFR register defined as 2: this results in a 0x8 offset, but there we have the FCR register instead. The right offset for the EFR register on MediaTek UART is at 0x98, so, following the decimal definition convention in serial_reg.h and accounting for the register left shift of two, add and use the correct register address for this IP, defined as decimal 38, so that the final calculation results in (0x26 << 2) = 0x98. Fixes: bdbd0a7f8f03 ("serial: 8250-mtk: modify baudrate setting") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220427132328.228297-2-angelogioacchino.delregno@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()Yang Yingliang
It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code. Fixes: 5930cb3511df ("serial: driver for Conexant Digicolor USART") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Baruch Siach <baruch@tkos.co.il> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220505124621.1592697-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05usb: gadget: uvc: allow for application to cleanly shutdownDan Vacura
Several types of kernel panics can occur due to timing during the uvc gadget removal. This appears to be a problem with gadget resources being managed by both the client application's v4l2 open/close and the UDC gadget bind/unbind. Since the concept of USB_GADGET_DELAYED_STATUS doesn't exist for unbind, add a wait to allow for the application to close out. Some examples of the panics that can occur are: <1>[ 1147.652313] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 <4>[ 1147.652510] Call trace: <4>[ 1147.652514] usb_gadget_disconnect+0x74/0x1f0 <4>[ 1147.652516] usb_gadget_deactivate+0x38/0x168 <4>[ 1147.652520] usb_function_deactivate+0x54/0x90 <4>[ 1147.652524] uvc_function_disconnect+0x14/0x38 <4>[ 1147.652527] uvc_v4l2_release+0x34/0xa0 <4>[ 1147.652537] __fput+0xdc/0x2c0 <4>[ 1147.652540] ____fput+0x10/0x1c <4>[ 1147.652545] task_work_run+0xe4/0x12c <4>[ 1147.652549] do_notify_resume+0x108/0x168 <1>[ 282.950561][ T1472] Unable to handle kernel NULL pointer dereference at virtual address 00000000000005b8 <6>[ 282.953111][ T1472] Call trace: <6>[ 282.953121][ T1472] usb_function_deactivate+0x54/0xd4 <6>[ 282.953134][ T1472] uvc_v4l2_release+0xac/0x1e4 <6>[ 282.953145][ T1472] v4l2_release+0x134/0x1f0 <6>[ 282.953167][ T1472] __fput+0xf4/0x428 <6>[ 282.953178][ T1472] ____fput+0x14/0x24 <6>[ 282.953193][ T1472] task_work_run+0xac/0x130 <3>[ 213.410077][ T29] configfs-gadget gadget: uvc: Failed to queue request (-108). <1>[ 213.410116][ T29] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000003 <6>[ 213.413460][ T29] Call trace: <6>[ 213.413474][ T29] uvcg_video_pump+0x1f0/0x384 <6>[ 213.413489][ T29] process_one_work+0x2a4/0x544 <6>[ 213.413502][ T29] worker_thread+0x350/0x784 <6>[ 213.413515][ T29] kthread+0x2ac/0x320 <6>[ 213.413528][ T29] ret_from_fork+0x10/0x30 Signed-off-by: Dan Vacura <w36195@motorola.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220503201039.71720-1-w36195@motorola.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05usb: typec: tcpci: Don't skip cleanup in .remove() on errorUwe Kleine-König
Returning an error value in an i2c remove callback results in an error message being emitted by the i2c core, but otherwise it doesn't make a difference. The device goes away anyhow and the devm cleanups are called. In this case the remove callback even returns early without stopping the tcpm worker thread and various timers. A work scheduled on the work queue, or a firing timer after tcpci_remove() returned probably results in a use-after-free situation because the regmap and driver data were freed. So better make sure that tcpci_unregister_port() is called even if disabling the irq failed. Also emit a more specific error message instead of the i2c core's "remove failed (EIO), will be ignored" and return 0 to suppress the core's warning. This patch is (also) a preparation for making i2c remove callbacks return void. Fixes: 3ba76256fc4e ("usb: typec: tcpci: mask event interrupts when remove driver") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: stable <stable@vger.kernel.org> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220502080456.21568-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05usb: cdc-wdm: fix reading stuck on device closeSergey Ryazanov
cdc-wdm tracks whether a response reading request is in-progress and blocks the next request from being sent until the previous request is completed. As soon as last user closes the cdc-wdm device file, the driver cancels any ongoing requests, resets the pending response counter, but leaves the response reading in-progress flag (WDM_RESPONDING) untouched. So if the user closes the device file during the response receive request is being performed, no more data will be obtained from the modem. The request will be cancelled, effectively preventing the WDM_RESPONDING flag from being reseted. Keeping the flag set will prevent a new response receive request from being sent, permanently blocking the read path. The read path will staying blocked until the module will be reloaded or till the modem will be re-attached. This stuck has been observed with a Huawei E3372 modem attached to an OpenWrt router and using the comgt utility to set up a network connection. Fix this issue by clearing the WDM_RESPONDING flag on the device file close. Without this fix, the device reading stuck can be easily reproduced in a few connection establishing attempts. With this fix, a load test for modem connection re-establishing worked for several hours without any issues. Fixes: 922a5eadd5a3 ("usb: cdc-wdm: Fix race between autosuspend and reading from the device") Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220501175828.8185-1-ryazanov.s.a@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05Merge tag 'net-5.18-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can, rxrpc and wireguard. Previous releases - regressions: - igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter() - mld: respect RCU rules in ip6_mc_source() and ip6_mc_msfilter() - rds: acquire netns refcount on TCP sockets - rxrpc: enable IPv6 checksums on transport socket - nic: hinic: fix bug of wq out of bound access - nic: thunder: don't use pci_irq_vector() in atomic context - nic: bnxt_en: fix possible bnxt_open() failure caused by wrong RFS flag - nic: mlx5e: - lag, fix use-after-free in fib event handler - fix deadlock in sync reset flow Previous releases - always broken: - tcp: fix insufficient TCP source port randomness - can: grcan: grcan_close(): fix deadlock - nfc: reorder destructive operations in to avoid bugs Misc: - wireguard: improve selftests reliability" * tag 'net-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits) NFC: netlink: fix sleep in atomic bug when firmware download timeout selftests: ocelot: tc_flower_chains: specify conform-exceed action for policer tcp: drop the hash_32() part from the index calculation tcp: increase source port perturb table to 2^16 tcp: dynamically allocate the perturb table used by source ports tcp: add small random increments to the source port tcp: resalt the secret every 10 seconds tcp: use different parts of the port_offset for index and offset secure_seq: use the 64 bits of the siphash for port offset calculation wireguard: selftests: set panic_on_warn=1 from cmdline wireguard: selftests: bump package deps wireguard: selftests: restore support for ccache wireguard: selftests: use newer toolchains to fill out architectures wireguard: selftests: limit parallelism to $(nproc) tests at once wireguard: selftests: make routing loop test non-fatal net/mlx5: Fix matching on inner TTC net/mlx5: Avoid double clear or set of sync reset requested net/mlx5: Fix deadlock in sync reset flow net/mlx5e: Fix trust state reset in reload net/mlx5e: Avoid checking offload capability in post_parse action ...
2022-05-05USB: serial: qcserial: add support for Sierra Wireless EM7590Ethan Yang
Add support for Sierra Wireless EM7590 0xc080/0xc081 compositions. Signed-off-by: Ethan Yang <etyang@sierrawireless.com> Link: https://lore.kernel.org/r/20220425055840.5693-1-etyang@sierrawireless.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-05-05gpio: visconti: Fix fwnode of GPIO IRQNobuhiro Iwamatsu
The fwnode of GPIO IRQ must be set to its own fwnode, not the fwnode of the parent IRQ. Therefore, this sets own fwnode instead of the parent IRQ fwnode to GPIO IRQ's. Fixes: 2ad74f40dacc ("gpio: visconti: Add Toshiba Visconti GPIO support") Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-05-05USB: serial: option: add Fibocom MA510 modemSven Schwermer
The MA510 modem has 3 USB configurations that are configurable via the AT command AT+GTUSBMODE={30,31,32} which make the modem enumerate with the following interfaces, respectively: 30: Diag + QDSS + Modem + RMNET 31: Diag + Modem + AT + ECM 32: Modem + AT + ECM The first configuration (30) reuses u-blox R410M's VID/PID with identical interface configuration. A detailed description of the USB configuration for each mode follows: +GTUSBMODE: 30 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 19 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05c6 ProdID=90b2 Rev= 0.00 S: Manufacturer=Fibocom MA510 Modem S: Product=Fibocom MA510 Modem S: SerialNumber=55e2695b C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +GTUSBMODE: 31 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 99 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0106 Rev= 0.00 S: Manufacturer=Fibocom MA510 Modem S: Product=Fibocom MA510 Modem S: SerialNumber=55e2695b C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +GTUSBMODE: 32 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=100 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=010a Rev= 0.00 S: Manufacturer=Fibocom MA510 Modem S: Product=Fibocom MA510 Modem S: SerialNumber=55e2695b C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 2 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 3 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-05-05USB: serial: option: add Fibocom L610 modemSven Schwermer
The L610 modem has 3 USB configurations that are configurable via the AT command AT+GTUSBMODE={31,32,33} which make the modem enumerate with the following interfaces, respectively: 31: Modem + NV + MOS + Diag + LOG + AT + AT 32: ECM + Modem + NV + MOS + Diag + LOG + AT + AT 33: RNDIS + Modem + NV + MOS + Diag + LOG + AT + AT A detailed description of the USB configuration for each mode follows: +GTUSBMODE: 31 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=124 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4d10 Rev= 0.00 S: Manufacturer=FIBOCOM S: Product=L610 C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=400mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +GTUSBMODE: 32 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=122 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4d11 Rev= 0.00 S: Manufacturer=FIBOCOM S: Product=L610 C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +GTUSBMODE: 33 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=126 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4d11 Rev= 0.00 S: Manufacturer=FIBOCOM S: Product=L610 C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03 I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=4096ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-05-05USB: serial: pl2303: add device id for HP LM930 DisplayScott Chen
Add the device id for the HPLM930Display which is a PL2303GC based device. Signed-off-by: Scott Chen <scott@labau.com.tw> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-05-04RDMA/rxe: Change mcg_lock to a _bh lockBob Pearson
rxe_mcast.c currently uses _irqsave spinlocks for rxe->mcg_lock while rxe_recv.c uses _bh spinlocks for the same lock. As there is no case where the mcg_lock can be taken from an IRQ, change these all to bh locks so we don't have confusing mismatched lock types on the same spinlock. Fixes: 6090a0c4c7c6 ("RDMA/rxe: Cleanup rxe_mcast.c") Link: https://lore.kernel.org/r/20220504202817.98247-1-rpearsonhpe@gmail.com Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-05-04RDMA/rxe: Do not call dev_mc_add/del() under a spinlockBob Pearson
These routines were not intended to be called under a spinlock and will throw debugging warnings: raw_local_irq_restore() called with IRQs enabled WARNING: CPU: 13 PID: 3107 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x2f/0x50 CPU: 13 PID: 3107 Comm: python3 Tainted: G E 5.18.0-rc1+ #7 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:warn_bogus_irq_restore+0x2f/0x50 Call Trace: <TASK> _raw_spin_unlock_irqrestore+0x75/0x80 rxe_attach_mcast+0x304/0x480 [rdma_rxe] ib_attach_mcast+0x88/0xa0 [ib_core] ib_uverbs_attach_mcast+0x186/0x1e0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xcd/0x140 [ib_uverbs] ib_uverbs_cmd_verbs+0xdb0/0xea0 [ib_uverbs] ib_uverbs_ioctl+0xd2/0x160 [ib_uverbs] do_syscall_64+0x5c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Move them out of the spinlock, it is OK if there is some races setting up the MC reception at the ethernet layer with rbtree lookups. Fixes: 6090a0c4c7c6 ("RDMA/rxe: Cleanup rxe_mcast.c") Link: https://lore.kernel.org/r/20220504202817.98247-1-rpearsonhpe@gmail.com Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-05-04RDMA/siw: Fix a condition race issue in MPA request processingCheng Xu
The calling of siw_cm_upcall and detaching new_cep with its listen_cep should be atomistic semantics. Otherwise siw_reject may be called in a temporary state, e,g, siw_cm_upcall is called but the new_cep->listen_cep has not being cleared. This fixes a WARN: WARNING: CPU: 7 PID: 201 at drivers/infiniband/sw/siw/siw_cm.c:255 siw_cep_put+0x125/0x130 [siw] CPU: 2 PID: 201 Comm: kworker/u16:22 Kdump: loaded Tainted: G E 5.17.0-rc7 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: iw_cm_wq cm_work_handler [iw_cm] RIP: 0010:siw_cep_put+0x125/0x130 [siw] Call Trace: <TASK> siw_reject+0xac/0x180 [siw] iw_cm_reject+0x68/0xc0 [iw_cm] cm_work_handler+0x59d/0xe20 [iw_cm] process_one_work+0x1e2/0x3b0 worker_thread+0x50/0x3a0 ? rescuer_thread+0x390/0x390 kthread+0xe5/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Fixes: 6c52fdc244b5 ("rdma/siw: connection management") Link: https://lore.kernel.org/r/d528d83466c44687f3872eadcb8c184528b2e2d4.1650526554.git.chengyou@linux.alibaba.com Reported-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-05-04Merge tag 'iomm-fixes-v5.18-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: "IOMMU core: - Fix for a regression which could cause NULL-ptr dereferences Arm SMMU: - Fix off-by-one in SMMUv3 SVA TLB invalidation - Disable large mappings to workaround nvidia erratum Intel VT-d: - Handle PCI stop marker messages in IOMMU driver to meet the requirement of I/O page fault handling framework. - Calculate a feasible mask for non-aligned page-selective IOTLB invalidation. Apple DART IOMMU: - Fix potential NULL-ptr dereference - Set module owner" * tag 'iomm-fixes-v5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: Make sysfs robust for non-API groups iommu/dart: Add missing module owner to ops structure iommu/dart: check return value after calling platform_get_resource() iommu/vt-d: Drop stop marker messages iommu/vt-d: Calculate mask for non-aligned flushes iommu: arm-smmu: disable large page mappings for Nvidia arm-smmu iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()
2022-05-04Merge tag 'for-linus-5.17-2' of https://github.com/cminyard/linux-ipmiLinus Torvalds
Pull IPMI fixes from Corey Minyard: "Fix some issues that were reported. This has been in for-next for a bit (longer than the times would indicate, I had to rebase to add some text to the headers) and these are fixes that need to go in" * tag 'for-linus-5.17-2' of https://github.com/cminyard/linux-ipmi: ipmi:ipmi_ipmb: Fix null-ptr-deref in ipmi_unregister_smi() ipmi: When handling send message responses, don't process the message
2022-05-04drm/amd/display: Avoid reading audio pattern past AUDIO_CHANNELS_COUNTHarry Wentland
A faulty receiver might report an erroneous channel count. We should guard against reading beyond AUDIO_CHANNELS_COUNT as that would overflow the dpcd_pattern_period array. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-05-04drm/amdgpu: do not use passthrough mode in Xen dom0Marek Marczykowski-Górecki
While technically Xen dom0 is a virtual machine too, it does have access to most of the hardware so it doesn't need to be considered a "passthrough". Commit b818a5d37454 ("drm/amdgpu/gmc: use PCI BARs for APUs in passthrough") changed how FB is accessed based on passthrough mode. This breaks amdgpu in Xen dom0 with message like this: [drm:dc_dmub_srv_wait_idle [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3 While the reason for this failure is unclear, the passthrough mode is not really necessary in Xen dom0 anyway. So, to unbreak booting affected kernels, disable passthrough mode in this case. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1985 Fixes: b818a5d37454 ("drm/amdgpu/gmc: use PCI BARs for APUs in passthrough") Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-05-04iommu: Make sysfs robust for non-API groupsRobin Murphy
Groups created by VFIO backends outside the core IOMMU API should never be passed directly into the API itself, however they still expose their standard sysfs attributes, so we can still stumble across them that way. Take care to consider those cases before jumping into our normal assumptions of a fully-initialised core API group. Fixes: 3f6634d997db ("iommu: Use right way to retrieve iommu_ops") Reported-by: Jan Stancek <jstancek@redhat.com> Tested-by: Jan Stancek <jstancek@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/86ada41986988511a8424e84746dfe9ba7f87573.1651667683.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04mmc: sdhci-msm: Reset GCC_SDCC_BCR register for SDHCShaik Sajida Bhanu
Reset GCC_SDCC_BCR register before every fresh initilazation. This will reset whole SDHC-msm controller, clears the previous power control states and avoids, software reset timeout issues as below. [ 5.458061][ T262] mmc1: Reset 0x1 never completed. [ 5.462454][ T262] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== [ 5.469065][ T262] mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00007202 [ 5.475688][ T262] mmc1: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 [ 5.482315][ T262] mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 [ 5.488927][ T262] mmc1: sdhci: Present: 0x01f800f0 | Host ctl: 0x00000000 [ 5.495539][ T262] mmc1: sdhci: Power: 0x00000000 | Blk gap: 0x00000000 [ 5.502162][ T262] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x00000003 [ 5.508768][ T262] mmc1: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 [ 5.515381][ T262] mmc1: sdhci: Int enab: 0x00000000 | Sig enab: 0x00000000 [ 5.521996][ T262] mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000 [ 5.528607][ T262] mmc1: sdhci: Caps: 0x362dc8b2 | Caps_1: 0x0000808f [ 5.535227][ T262] mmc1: sdhci: Cmd: 0x00000000 | Max curr: 0x00000000 [ 5.541841][ T262] mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000 [ 5.548454][ T262] mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 [ 5.555079][ T262] mmc1: sdhci: Host ctl2: 0x00000000 [ 5.559651][ T262] mmc1: sdhci_msm: ----------- VENDOR REGISTER DUMP----------- [ 5.566621][ T262] mmc1: sdhci_msm: DLL sts: 0x00000000 | DLL cfg: 0x6000642c | DLL cfg2: 0x0020a000 [ 5.575465][ T262] mmc1: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl: 0x00010800 | DDR cfg: 0x80040873 [ 5.584658][ T262] mmc1: sdhci_msm: Vndr func: 0x00018a9c | Vndr func2 : 0xf88218a8 Vndr func3: 0x02626040 Fixes: 0eb0d9f4de34 ("mmc: sdhci-msm: Initial support for Qualcomm chipsets") Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Konrad Dybcio <konrad.dybcio@somainline.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1650816153-23797-1-git-send-email-quic_c_sbhanu@quicinc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-05-04mmc: sunxi-mmc: Fix DMA descriptors allocated above 32 bitsSamuel Holland
Newer variants of the MMC controller support a 34-bit physical address space by using word addresses instead of byte addresses. However, the code truncates the DMA descriptor address to 32 bits before applying the shift. This breaks DMA for descriptors allocated above the 32-bit limit. Fixes: 3536b82e5853 ("mmc: sunxi: add support for A100 mmc controller") Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220424231751.32053-1-samuel@sholland.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-05-04iommu/dart: Add missing module owner to ops structureHector Martin
This is required to make loading this as a module work. Signed-off-by: Hector Martin <marcan@marcan.st> Fixes: 46d1fb072e76 ("iommu/dart: Add DART iommu driver") Reviewed-by: Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/r/20220502092238.30486-1-marcan@marcan.st Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04drm/bridge: ite-it6505: add missing Kconfig option selectFabien Parent
The IT6505 is using functions provided by the DRM_DP_HELPER driver. In order to avoid having the bridge enabled but the helper disabled, let's add a select in order to be sure that the DP helper functions are always available. Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver") Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220426141536.274727-1-fparent@baylibre.com
2022-05-04net/mlx5: Fix matching on inner TTCMark Bloch
The cited commits didn't use proper matching on inner TTC as a result distribution of encapsulated packets wasn't symmetric between the physical ports. Fixes: 4c71ce50d2fe ("net/mlx5: Support partial TTC rules") Fixes: 8e25a2bc6687 ("net/mlx5: Lag, add support to create TTC tables for LAG port selection") Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-04net/mlx5: Avoid double clear or set of sync reset requestedMoshe Shemesh
Double clear of reset requested state can lead to NULL pointer as it will try to delete the timer twice. This can happen for example on a race between abort from FW and pci error or reset. Avoid such case using test_and_clear_bit() to verify only one time reset requested state clear flow. Similarly use test_and_set_bit() to verify only one time reset requested state set flow. Fixes: 7dd6df329d4c ("net/mlx5: Handle sync reset abort event") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-04net/mlx5: Fix deadlock in sync reset flowMoshe Shemesh
The sync reset flow can lead to the following deadlock when poll_sync_reset() is called by timer softirq and waiting on del_timer_sync() for the same timer. Fix that by moving the part of the flow that waits for the timer to reset_reload_work. It fixes the following kernel Trace: RIP: 0010:del_timer_sync+0x32/0x40 ... Call Trace: <IRQ> mlx5_sync_reset_clear_reset_requested+0x26/0x50 [mlx5_core] poll_sync_reset.cold+0x36/0x52 [mlx5_core] call_timer_fn+0x32/0x130 __run_timers.part.0+0x180/0x280 ? tick_sched_handle+0x33/0x60 ? tick_sched_timer+0x3d/0x80 ? ktime_get+0x3e/0xa0 run_timer_softirq+0x2a/0x50 __do_softirq+0xe1/0x2d6 ? hrtimer_interrupt+0x136/0x220 irq_exit+0xae/0xb0 smp_apic_timer_interrupt+0x7b/0x140 apic_timer_interrupt+0xf/0x20 </IRQ> Fixes: 3c5193a87b0f ("net/mlx5: Use del_timer_sync in fw reset flow of halting poll") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Maher Sanalla <msanalla@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-04net/mlx5e: Fix trust state reset in reloadMoshe Tal
Setting dscp2prio during the driver reload can cause dcb ieee app list to be not empty after the reload finish and as a result to a conflict between the priority trust state reported by the app and the state in the device register. Reset the dcb ieee app list on initialization in case this is conflicting with the register status. Fixes: 2a5e7a1344f4 ("net/mlx5e: Add dcbnl dscp to priority support") Signed-off-by: Moshe Tal <moshet@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-04net/mlx5e: Avoid checking offload capability in post_parse actionAriel Levkovich
During TC action parsing, the can_offload callback is called before calling the action's main parsing callback. Later on, the can_offload callback is called again before handling the action's post_parse callback if exists. Since the main parsing callback might have changed and set parsing params for the rule, following can_offload checks might fail because some parsing params were already set. Specifically, the ct action main parsing sets the ct param in the parsing status structure and when the second can_offload for ct action is called, before handling the ct post parsing, it will return an error since it checks this ct param to indicate multiple ct actions which are not supported. Therefore, the can_offload call is removed from the post parsing handling to prevent such cases. This is allowed since the first can_offload call will ensure that the action can be offloaded and the fact the code reached the post parsing handling already means that the action can be offloaded. Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions") Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-04net/mlx5e: CT: Fix queued up restore put() executing after relevant ft releasePaul Blakey
__mlx5_tc_ct_entry_put() queues release of tuple related to some ct FT, if that is the last reference to that tuple, the actual deletion of the tuple can happen after the FT is already destroyed and freed. Flush the used workqueue before destroying the ct FT. Fixes: a2173131526d ("net/mlx5e: CT: manage the lifetime of the ct entry object") Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-04net/mlx5e: TC, fix decap fallback to uplink when int port not supportedAriel Levkovich
When resolving the decap route device for a tunnel decap rule, the result may be an OVS internal port device. Prior to adding the support for internal port offload, such case would result in using the uplink as the default decap route device which allowed devices that can't support internal port offload to offload this decap rule. This behavior got broken by adding the internal port offload which will fail in case the device can't support internal port offload. To restore the old behavior, use the uplink device as the decap route as before when internal port offload is not supported. Fixes: b16eb3c81fe2 ("net/mlx5: Support internal port as decap route device") Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-04net/mlx5e: TC, Fix ct_clear overwriting ct action metadataAriel Levkovich
ct_clear action is translated to clearing reg_c metadata which holds ct state and zone information using mod header actions. These actions are allocated during the actions parsing, as part of the flow attributes main mod header action list. If ct action exists in the rule, the flow's main mod header is used only in the post action table rule, after the ct tables which set the ct info in the reg_c as part of the ct actions. Therefore, if the original rule has a ct_clear action followed by a ct action, the ct action reg_c setting will be done first and will be followed by the ct_clear resetting reg_c and overwriting the ct info. Fix this by moving the ct_clear mod header actions allocation from the ct action parsing stage to the ct action post parsing stage where it is already known if ct_clear is followed by a ct action. In such case, we skip the mod header actions allocation for the ct clear since the ct action will write to reg_c anyway after clearing it. Fixes: 806401c20a0f ("net/mlx5e: CT, Fix multiple allocations and memleak of mod acts") Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-04net/mlx5e: Lag, Don't skip fib events on current dstVlad Buslov
Referenced change added check to skip updating fib when new fib instance has same or lower priority. However, new fib instance can be an update on same dst address as existing one even though the structure is another instance that has different address. Ignoring events on such instances causes multipath LAG state to not be correctly updated. Track 'dst' and 'dst_len' fields of fib event fib_entry_notifier_info structure and don't skip events that have the same value of that fields. Fixes: ad11c4f1d8fd ("net/mlx5e: Lag, Only handle events from highest priority multipath entry") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-04net/mlx5e: Lag, Fix fib_info pointer assignmentVlad Buslov
Referenced change incorrectly sets single path fib_info even when LAG is not active. Fix it by moving call to mlx5_lag_fib_set() into conditional that verifies LAG state. Fixes: ad11c4f1d8fd ("net/mlx5e: Lag, Only handle events from highest priority multipath entry") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-04net/mlx5e: Lag, Fix use-after-free in fib event handlerVlad Buslov
Recent commit that modified fib route event handler to handle events according to their priority introduced use-after-free[0] in mp->mfi pointer usage. The pointer now is not just cached in order to be compared to following fib_info instances, but is also dereferenced to obtain fib_priority. However, since mlx5 lag code doesn't hold the reference to fin_info during whole mp->mfi lifetime, it could be used after fib_info instance has already been freed be kernel infrastructure code. Don't ever dereference mp->mfi pointer. Refactor it to be 'const void*' type and cache fib_info priority in dedicated integer. Group fib_info-related data into dedicated 'fib' structure that will be further extended by following patches in the series. [0]: [ 203.588029] ================================================================== [ 203.590161] BUG: KASAN: use-after-free in mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core] [ 203.592386] Read of size 4 at addr ffff888144df2050 by task kworker/u20:4/138 [ 203.594766] CPU: 3 PID: 138 Comm: kworker/u20:4 Tainted: G B 5.17.0-rc7+ #6 [ 203.596751] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 203.598813] Workqueue: mlx5_lag_mp mlx5_lag_fib_update [mlx5_core] [ 203.600053] Call Trace: [ 203.600608] <TASK> [ 203.601110] dump_stack_lvl+0x48/0x5e [ 203.601860] print_address_description.constprop.0+0x1f/0x160 [ 203.602950] ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core] [ 203.604073] ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core] [ 203.605177] kasan_report.cold+0x83/0xdf [ 203.605969] ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core] [ 203.607102] mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core] [ 203.608199] ? mlx5_lag_init_fib_work+0x1c0/0x1c0 [mlx5_core] [ 203.609382] ? read_word_at_a_time+0xe/0x20 [ 203.610463] ? strscpy+0xa0/0x2a0 [ 203.611463] process_one_work+0x722/0x1270 [ 203.612344] worker_thread+0x540/0x11e0 [ 203.613136] ? rescuer_thread+0xd50/0xd50 [ 203.613949] kthread+0x26e/0x300 [ 203.614627] ? kthread_complete_and_exit+0x20/0x20 [ 203.615542] ret_from_fork+0x1f/0x30 [ 203.616273] </TASK> [ 203.617174] Allocated by task 3746: [ 203.617874] kasan_save_stack+0x1e/0x40 [ 203.618644] __kasan_kmalloc+0x81/0xa0 [ 203.619394] fib_create_info+0xb41/0x3c50 [ 203.620213] fib_table_insert+0x190/0x1ff0 [ 203.621020] fib_magic.isra.0+0x246/0x2e0 [ 203.621803] fib_add_ifaddr+0x19f/0x670 [ 203.622563] fib_inetaddr_event+0x13f/0x270 [ 203.623377] blocking_notifier_call_chain+0xd4/0x130 [ 203.624355] __inet_insert_ifa+0x641/0xb20 [ 203.625185] inet_rtm_newaddr+0xc3d/0x16a0 [ 203.626009] rtnetlink_rcv_msg+0x309/0x880 [ 203.626826] netlink_rcv_skb+0x11d/0x340 [ 203.627626] netlink_unicast+0x4cc/0x790 [ 203.628430] netlink_sendmsg+0x762/0xc00 [ 203.629230] sock_sendmsg+0xb2/0xe0 [ 203.629955] ____sys_sendmsg+0x58a/0x770 [ 203.630756] ___sys_sendmsg+0xd8/0x160 [ 203.631523] __sys_sendmsg+0xb7/0x140 [ 203.632294] do_syscall_64+0x35/0x80 [ 203.633045] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 203.634427] Freed by task 0: [ 203.635063] kasan_save_stack+0x1e/0x40 [ 203.635844] kasan_set_track+0x21/0x30 [ 203.636618] kasan_set_free_info+0x20/0x30 [ 203.637450] __kasan_slab_free+0xfc/0x140 [ 203.638271] kfree+0x94/0x3b0 [ 203.638903] rcu_core+0x5e4/0x1990 [ 203.639640] __do_softirq+0x1ba/0x5d3 [ 203.640828] Last potentially related work creation: [ 203.641785] kasan_save_stack+0x1e/0x40 [ 203.642571] __kasan_record_aux_stack+0x9f/0xb0 [ 203.643478] call_rcu+0x88/0x9c0 [ 203.644178] fib_release_info+0x539/0x750 [ 203.644997] fib_table_delete+0x659/0xb80 [ 203.645809] fib_magic.isra.0+0x1a3/0x2e0 [ 203.646617] fib_del_ifaddr+0x93f/0x1300 [ 203.647415] fib_inetaddr_event+0x9f/0x270 [ 203.648251] blocking_notifier_call_chain+0xd4/0x130 [ 203.649225] __inet_del_ifa+0x474/0xc10 [ 203.650016] devinet_ioctl+0x781/0x17f0 [ 203.650788] inet_ioctl+0x1ad/0x290 [ 203.651533] sock_do_ioctl+0xce/0x1c0 [ 203.652315] sock_ioctl+0x27b/0x4f0 [ 203.653058] __x64_sys_ioctl+0x124/0x190 [ 203.653850] do_syscall_64+0x35/0x80 [ 203.654608] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 203.666952] The buggy address belongs to the object at ffff888144df2000 which belongs to the cache kmalloc-256 of size 256 [ 203.669250] The buggy address is located 80 bytes inside of 256-byte region [ffff888144df2000, ffff888144df2100) [ 203.671332] The buggy address belongs to the page: [ 203.672273] page:00000000bf6c9314 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x144df0 [ 203.674009] head:00000000bf6c9314 order:2 compound_mapcount:0 compound_pincount:0 [ 203.675422] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff) [ 203.676819] raw: 002ffff800010200 0000000000000000 dead000000000122 ffff888100042b40 [ 203.678384] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 [ 203.679928] page dumped because: kasan: bad access detected [ 203.681455] Memory state around the buggy address: [ 203.682421] ffff888144df1f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 203.683863] ffff888144df1f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 203.685310] >ffff888144df2000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 203.686701] ^ [ 203.687820] ffff888144df2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 203.689226] ffff888144df2100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 203.690620] ================================================================== Fixes: ad11c4f1d8fd ("net/mlx5e: Lag, Only handle events from highest priority multipath entry") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-04net/mlx5e: Fix the calling of update_buffer_lossy() APIMark Zhang
The arguments of update_buffer_lossy() is in a wrong order. Fix it. Fixes: 88b3d5c90e96 ("net/mlx5e: Fix port buffers cell size value") Signed-off-by: Mark Zhang <markzhang@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-04net/mlx5e: Don't match double-vlan packets if cvlan is not setVlad Buslov
Currently, match VLAN rule also matches packets that have multiple VLAN headers. This behavior is similar to buggy flower classifier behavior that has recently been fixed. Fix the issue by matching on outer_second_cvlan_tag with value 0 which will cause the HW to verify the packet doesn't contain second vlan header. Fixes: 699e96ddf47f ("net/mlx5e: Support offloading tc double vlan headers match") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-04net/mlx5: Fix slab-out-of-bounds while reading resource dump menuAya Levin
Resource dump menu may span over more than a single page, support it. Otherwise, menu read may result in a memory access violation: reading outside of the allocated page. Note that page format of the first menu page contains menu headers while the proceeding menu pages contain only records. The KASAN logs are as follows: BUG: KASAN: slab-out-of-bounds in strcmp+0x9b/0xb0 Read of size 1 at addr ffff88812b2e1fd0 by task systemd-udevd/496 CPU: 5 PID: 496 Comm: systemd-udevd Tainted: G B 5.16.0_for_upstream_debug_2022_01_10_23_12 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x57/0x7d print_address_description.constprop.0+0x1f/0x140 ? strcmp+0x9b/0xb0 ? strcmp+0x9b/0xb0 kasan_report.cold+0x83/0xdf ? strcmp+0x9b/0xb0 strcmp+0x9b/0xb0 mlx5_rsc_dump_init+0x4ab/0x780 [mlx5_core] ? mlx5_rsc_dump_destroy+0x80/0x80 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x286/0x400 ? raw_spin_unlock_irqrestore+0x47/0x50 ? aomic_notifier_chain_register+0x32/0x40 mlx5_load+0x104/0x2e0 [mlx5_core] mlx5_init_one+0x41b/0x610 [mlx5_core] .... The buggy address belongs to the object at ffff88812b2e0000 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 4048 bytes to the right of 4096-byte region [ffff88812b2e0000, ffff88812b2e1000) The buggy address belongs to the page: page:000000009d69807a refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88812b2e6000 pfn:0x12b2e0 head:000000009d69807a order:3 compound_mapcount:0 compound_pincount:0 flags: 0x8000000000010200(slab|head|zone=2) raw: 8000000000010200 0000000000000000 dead000000000001 ffff888100043040 raw: ffff88812b2e6000 0000000080040000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88812b2e1e80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88812b2e1f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88812b2e1f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88812b2e2000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88812b2e2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 12206b17235a ("net/mlx5: Add support for resource dump") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-04net/mlx5e: Fix wrong source vport matching on tunnel ruleAriel Levkovich
When OVS internal port is the vtep device, the first decap rule is matching on the internal port's vport metadata value and then changes the metadata to be the uplink's value. Therefore, following rules on the tunnel, in chain > 0, should avoid matching on internal port metadata and use the uplink vport metadata instead. Select the uplink's metadata value for the source vport match in case the rule is in chain greater than zero, even if the tunnel route device is internal port. Fixes: 166f431ec6be ("net/mlx5e: Add indirect tc offload of ovs internal port") Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-05-03bnxt_en: Fix unnecessary dropping of RX packetsMichael Chan
In bnxt_poll_p5(), we first check cpr->has_more_work. If it is true, we are in NAPI polling mode and we will call __bnxt_poll_cqs() to continue polling. It is possible to exhanust the budget again when __bnxt_poll_cqs() returns. We then enter the main while loop to check for new entries in the NQ. If we had previously exhausted the NAPI budget, we may call __bnxt_poll_work() to process an RX entry with zero budget. This will cause packets to be dropped unnecessarily, thinking that we are in the netpoll path. Fix it by breaking out of the while loop if we need to process an RX NQ entry with no budget left. We will then exit NAPI and stay in polling mode. Fixes: 389a877a3b20 ("bnxt_en: Process the NQ under NAPI continuous polling.") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03bnxt_en: Initiallize bp->ptp_lock first before using itMichael Chan
bnxt_ptp_init() calls bnxt_ptp_init_rtc() which will acquire the ptp_lock spinlock. The spinlock is not initialized until later. Move the bnxt_ptp_init_rtc() call after the spinlock is initialized. Fixes: 24ac1ecd5240 ("bnxt_en: Add driver support to use Real Time Counter for PTP") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-11 09:06:26 +0000